Prodct ata Sheet E MAGNI 556E FASTENER COATING MAGNI 556 · VW 01131/1, 01131/2 Color Silver Cyclic...
1
PERFORMANCE DATA*: Coating thickness 12-15 microns avg. (depending on requirements) Coefficient of friction MBN 10544/ISO 16047 VW 01131/1, 01131/2 Silver Color Cyclic corrosion See OEM specifications resistance Heated loosening VDA 235-203 Salt spray ISO 9227: 1,500 hours OEM SPECIFICATIONS: Daimler Volkswagen DBL 944.40 (released) TL245 Ofl-t647 (in progress) GS90010 ZnS3 (in progress) MAGNI 556 E MAGNI 556E Magni 556E is a chrome-free, duplex-coating fastener system that combines an inorganic zinc-rich basecoat with an organic aluminum-rich topcoat with friction values targeted specifically to meet various European OEM standards. The inorganic basecoat system is developed for superior heat-resistant corrosion performance and consistent in-process material stability. The organic topcoat is engineered to provide outstanding adhesion, heated-loosening, and chemical resistance qualities. Magni 556E can be applied using dip-spin or spray. In dipspin applications, Magni 556E is applied in three layers (two layers basecoat). Magni 556 is used in the most corrosive automotive environments. FASTENER COATING Product Data Sheet MagniCoatings.com © Magni 1/18 *Typical Values – refer to OEM Specifications and Magni Application Guidelines for official specifications BMW
Transcript of Prodct ata Sheet E MAGNI 556E FASTENER COATING MAGNI 556 · VW 01131/1, 01131/2 Color Silver Cyclic...
PERFORMANCE DATA*:
Coating thickness 12-15 microns avg.(depending on requirements)
Coefficient of friction MBN 10544/ISO 16047 VW 01131/1, 01131/2
SilverColor Cyclic corrosion See OEM specificationsresistance
Heated loosening VDA 235-203
Salt sprayISO 9227: 1,500 hours
OEM SPECIFICATIONS:
Daimler
Volkswagen
DBL 944.40 (released)
TL245 Ofl-t647 (in progress)
GS90010 ZnS3 (in progress)
MA
GN
I 556
EMAGNI 556EMagni 556E is a chrome-free, duplex-coating fastener system that combines an inorganic zinc-rich basecoat with an organic aluminum-rich topcoat with friction values targeted specifically to meet various European OEM standards. The inorganic basecoat system is developed for superior heat-resistant corrosion performance and consistent in-process material stability. The organic topcoat is engineered to provide outstanding adhesion, heated-loosening, and chemical resistance qualities. Magni 556E can be applied using dip-spin or spray. In dipspin applications, Magni 556E is applied in three layers (two layers basecoat). Magni 556 is used in the most corrosive automotive environments.
FASTENER COATING
Product Data Sheet
MagniCoatings.com © Magni 1/18
*Typical Values – refer to OEM Specifications and Magni Application Guidelines for official specifications
BMW
