Price List

PRICE LISTrenewable energy solutions

Product - Capacity Diameter x Height (Part No.) Price (ex. VAT)

STAiNleSS FoAmeD CyliNDerSIncludes Foamed Insulation, Bottom and Top Connections - REQUIRES PATTERN ADDITION (below)

Stainless Cylinder - 96 litre 450mm x 700mm (SSCYL-96) £317.24Stainless Cylinder - 124 litre 450mm x 900mm (SSCYL-124) £373.24Stainless Cylinder - 144 litre 450mm x 1050mm (SSCYL-144) £390.04Stainless Cylinder - 165 litre 450mm x 1200mm (SSCYL-165) £429.24Stainless Cylinder - 220 litre 450mm x 1500mm (SSCYL-220) £490.00Stainless Cylinder - 247 litre 450mm x 1800mm (SSCYL-247) £546.00Stainless Cylinder - 300 litre 500mm x 1800mm (SSCYL-300) £854.00Stainless Cylinder - 390 litre 600mm x 1500mm (SSCYL-390) £912.80Stainless Cylinder - 500 litre 600mm x 1800mm (SSCYL-500) £1,134.00

STAiNleSS FoAmeD CombiNATioN CyliNDerS wiTH iNTegrAl FeeD TANkIncludes Foamed Insulation, Integral Feed Tank, Cold Feed, Vent, Hot Draw Off - REQUIRES OPTIONS (below)

Stainless Combination - 90/20 litre 450mm x 900mm (SSCU-90-20) £568.40Stainless Combination - 120/20 litre 450mm x 1050mm (SSCU-120-20) £568.40Stainless Combination - 120/40 litre 450mm x 1200mm (SSCU-120-40) £627.20Stainless Combination - 150/40 litre 450mm x 1500mm (SSCU-150-40) £688.80Stainless Combination - 200/40 litre 450mm x 1800mm (SSCU-200-40) £742.00

oPTioNS (to be added to the above) Please check selected options are within manufacturing limits when ordering

Indirect Units will require at least 1 x Hot Water Coil, 1 x Boiler Coil and 1 x Immersion Heater Boss eg. SSCYL-165-HWC1-BC2257-IHB Pellet Buffer Units will require at least 1 x Hot Water Coil, Tappings for Direct Boiler, Tappings for Heating, 1 x Immersion Heater Boss eg. SSCYL-165-HWC1-DB-HTG-IHB

Increases cold in / hot out sizes up to 1.5” (not combination cylinders) (-XL) £28.00Extra Tapping, up to 1.5” (per tapping) (-X12) (-X34) (-X1) £28.00 Available sizes: 1/2”, 3/4”, 1”, 1.1/4”, 1.1/2” Female BSP. Please specify positions. (-X114) (-X112)Immersion Boss, 1.3/4” or 2.1/4” (-IHB134) (-IHB) £28.0022mm Diffuser Tube (-22DIFFT) £33.60Tappings for Direct Boiler Input (2 x 3/4” and 1 x 1/2” tappings) (-DB) £84.00Tappings for Central Heating or Underfloor Heating Circuits (2 x 3/4” tappings) (-HTG) (-UFH) £56.00Inspection Hatch (250mm diameter) (-INSPECT) £1,106.00Boiler Coil - 22mm 5.7m (8.5kW) for 90 litre - 300 litre units (includes 1 x 1/2” tapping) (-BC2257) £117.60Boiler Coil - 22mm 6.8m (10.2kW) (includes 1 x 1/2” tapping) (-BC2268) £126.00Boiler Coil - 22mm 7.9m (11.85kW) (includes 1 x 1/2” tapping) (-BC2279) £131.60Boiler Coil - 28mm 5.8m (11.6kW) (includes 1 x 1/2” tapping) (-BC2858) £151.20Boiler Coil - 28mm 6.9m (13.8kW) for 400 litre units (includes 1 x 1/2” tapping) (-BC2869) £165.20Boiler Coil - 28mm 8.01m (16.2kW) for 500 litre units (includes 1 x 1/2” tapping) (-BC288) £182.00Quick Recovery Coil - 2 x 22mm 5.7m (QRC1) £179.20Quick Recovery Coil - 2 x 22mm 6.8m (QRC2) £196.00Quick Recovery Coil - 2 x 22mm 7.9m (QRC3) £207.20Quick Recovery Coil - 2 x 28mm 8.01m (QRC4) £308.00Hot Water Coil - 2 x 28mm 8.01m (2.27m2) for 90 litre - 300 litre units (-HWC1) £308.00Hot Water Coil - 4 x 28mm 5.8m (3.3m2) for 400 litre - 500 litre units (-HWC2) £492.80Mixing Valve and Expansion Vessel Assembly for Domestic Hot Water Coil (-MIXEXP) £126.00For External Plate Heat Exchanger for DHW (2 x Diffuser Tubes) (-HB) £67.20Solar Coil - 22mm 5.7m for 90 litre - 150 litre units (includes 2 x 1/2” tappings) (-SC2257) £145.60Solar Coil - 22mm 6.8m for 170 litre - 200 litre units (includes 2 x 1/2” tappings) (-SC2268) £154.00Solar Coil - 22mm 7.9m for 250 litre - 300 litre units (includes 2 x 1/2” tappings) (-SC2279) £159.60Solar Coil - 28mm 8.01m for 400 litre - 500 litre units (includes 2 x 1/2” tappings) (-SC288) £210.00Heat Pump Coil - 4 x 28mm 5.8m (3.3m2) for 200 litre and above only (-HPC1) £492.80Overheat Coil - 22mm 5.7m (8.5kW) (includes 1 x 1/2” tapping) (-OHC1) £117.60Increase Foam Insulation to 50mm (-F50) £28.00Outer Steel Casing with White Finish (-CASED) £125.00

Please note, there are more options that can be added to the above units on page 3 under Individual System Options

The general stainless steel cylinders in this range are suitable for use as both domestic hot water stores and as thermal stores, depending upon the options selected. Options allow you to ‘build- your- own’ design; selecting sizes, connections and coils. Cylinders can be domestic stores or thermal stores.

Inte

gral

Fee

d &

Exp

ansi

on T

ank

Ther

mal

Sto

re D

HW

on

Coi

l

Ther

mal

Sto

re D

HW

on

PH

E

Ele

ctric

Indi

rect

Boi

ler

Dire

ct B

oile

r

Woo

d B

urne

r

Indi

rect

Hea

t Pum

p

Sol

ar

Cas

ed

stainless steel cylinders

Standard optional

Product - Capacity Diameter x Height (Part No.) Price (ex. VAT)

XCel 2009 HeATbANk®: bASe UNiTS (No Assemblies Fitted)Xcel 2009 - 210 litre 530mm x 1600mm (X2009-1-210) £1,677.06Xcel 2009 Low Head - 210 litre 530mm x 1400mm (X2009-1-210-FT) £1,909.46Xcel 2009 - 210 litre Slimline 465mm x 2000mm (X2009-1-220-400DIA) £1,480.72Xcel 2009 - 250 litre 530mm x 1800mm (X2009-1-250) £1,730.26Xcel 2009 Low Head - 250 litre 580mm x 1400mm (X2009-1-250-FT) £1,971.06Xcel 2009 - 300 litre 530mm x 2000mm (X2009-1-1A) £1,945.86Xcel 2009 - 315 litre 580mm x 1800mm (X2009-1-315-1800) £2,279.06Xcel 2009 - 350 litre 580mm x 2000mm (X2009-1-1B) £2,167.06Xcel 2009 Low Head - 350 litre 680mm x 1400mm (X2009-1-350-FT) £2,279.06Xcel 2009 - 350 litre Short 680mm x 1600mm (X2009-1-350-1600) £2,027.06Xcel 2009 Low Head - 400 litre 680mm x 1400mm (X2009-400-FT) £2,363.06Xcel 2009 - 475 litre 680mm x 2000mm (X2009-1C) £2,421.86Xcel 2009 - 700 litre 822mm x 1664mm (X2009-1-700L) £5,289.06Xcel 2009 - 850 litre 822mm x 1964mm (X2009-1-850L) £5,401.06

iNDiViDUAl SySTem oPTioNS: CommoN oPTioNS (others Available)The following assemblies are suitable for units with the appropriate connections, such as the X2009 range above. When adding these assemblies to other systems, additional bosses may need to be added.

Mains Hot Water Plate Heat Exchanger (30 lpm) (X2009-2-22) £696.47Mains Hot Water Plate Heat Exchanger (45 lpm) (X2009-2) £787.00Mains Hot Water Plate Heat Exchanger (30 lpm, modulating) (X2009-2C) £763.43Secondary Return Pump (X2009-4) £343.30Electronic Hard Water Protection (X2009-3) £245.23Direct Boiler Input (30kW) (X2009-5) £287.36Direct Boiler Input (45kW) (X2009-5B) £320.34Boiler Pump (standard) (X2009-11B) £202.47Boiler Pump (hi-flow) (X2009-12B) £527.49Indirect Boiler Input (28kW) (X2009-6) £599.03Buffering Boiler Thermostat (X2009-7) £72.35Economy Boiler Thermostat (X2009-8) £45.33Overheat Thermostat (to heating) (X2009-9) £45.33Overheat Discharge for Systems without Overheat Coil (X2009-13) £263.78Overheat Discharge for Systems with Overheat Coil (X2009-13T) £152.04Central Heating Pump (standard) (X2009-11A) £215.10Central Heating Pump (hi-flow) (X2009-12A) £544.37Pumped Wood Burner System (X2009-5C) £597.643kW Immersion Heater (X2009-16A) £109.966kW Immersion Heater (X2009-16B) £178.6112kW Three Phase Immersion Heater (X2009-16D) £289.00Solar Sensor Pockets (x2) (X2009-10) £15.64Two Channel Programmer for Boiler (Normal/Economy) (X2009-18A) £84.56Temperature Gauge (X2009-17) £18.05450 x 300 Feed & Expansion Tank (FE450X300FIT) £239.87450 x 450 Feed & Expansion Tank (FE450X450FIT) £326.75Pressurised Cylinder Controls (X2009-19) £209.77Wiring Box, Backplate and Wire (-WIRED) £31.56

the UK’s No. 1 supplier of Flue, chimney & renewable energy solutions0800 90 20 220 // www.specflue.com

Ove

rhea

t Dis

char

ge C

oil

3 B

ar W

orki

ng P

ress

ure

0.2

Bar

Wor

king

Pre

ssur

e

Pre

-Plu

mbe

d &

Pre

-Wire

d

Cas

ed

Ele

ctric

Indi

rect

Boi

ler

Dire

ct B

oile

r

Gra

vity

Woo

d B

urne

r

Pum

ped

Woo

d B

urne

r

Sol

ar

Dis

tric

t Hea

ting

Xcel HeAtBANK® systems

Standard optional Fitted, not wired

The Xcel HEATBANk® represents the cutting edge of integrated thermal storage. Multiple heat sources can be successfully integrated, allowing for low grade and high grade heat sources and heat loads. The standard Xcel provides connections for a gas boiler, pellet boiler, wood burner, heat pump, solar panels, radiators, underfloor heating and mains pressure hot water.

E&OE

Product - Capacity Diameter x Height (Part No.) Price (ex. VAT)

AmAzoN UNVeNTeD CyliNDerS: STANDArD eleCTriCIncludes Inlet Control Set, Expansion Vessel, Safety Valves, Tundish and 2 x Immersion Heaters

Amazon, Standard Electric - 90 litre 510mm x 750mm (AZ-90-ELC) £756.00Amazon, Standard Electric - 125 litre 510mm x 935mm (AZ-125-ELC) £756.00Amazon, Standard Electric - 150 litre 510mm x 1060mm (AZ-150-ELC) £778.40Amazon, Standard Electric - 170 litre 510mm x 1200mm (AZ-170-ELC) £806.40Amazon, Standard Electric - 200 litre 554mm x 1120mm (AZ-200-ELC) £834.40Amazon, Standard Electric - 250 litre 554mm x 1330mm (AZ-250-ELC) £904.40Amazon, Standard Electric - 300 litre 554mm x 1650mm (AZ-300-ELC) £946.40Amazon, Standard Electric - 400 litre 600mm x 1590mm (AZ-400-ELC) £1,428.00Amazon, Standard Electric - 500 litre 600mm x 1635mm (AZ-500-ELC) £1,540.00Amazon, Standard Electric - 750 litre 822mm x 1700mm (AZ-750-ELC) £3,626.00Amazon, Standard Electric - 1000 litre 822mm x 2314mm (AZ-1000-ELC) £3,976.00

AmAzoN UNVeNTeD CyliNDerS: STANDArD iNDireCTIncludes Inlet Control Set, Expansion Vessel, Safety Valves, Tundish, Cylinder Stat, 2 Port Motorised Valve, Primary Coil and 1 x Immersion Heater

Amazon, Standard Indirect - 90 litre 510mm x 750mm (AZ-90-IND) £862.40Amazon, Standard Indirect - 125 litre 510mm x 935mm (AZ-125-IND) £862.40Amazon, Standard Indirect - 150 litre 510mm x 1060mm (AZ-150-IND) £890.40Amazon, Standard Indirect - 170 litre 510mm x 1200mm (AZ-170-IND) £932.40Amazon, Standard Indirect - 200 litre 554mm x 1120mm (AZ-200-IND) £974.40Amazon, Standard Indirect - 250 litre 554mm x 1330mm (AZ-250-IND) £1,030.40Amazon, Standard Indirect - 300 litre 554mm x 1650mm (AZ-300-IND) £1,086.40Amazon, Standard Indirect - 400 litre 600mm x 1590mm (AZ-400-IND) £1,652.00Amazon, Standard Indirect - 500 litre 600mm x 1635mm (AZ-500-IND) £1,792.00Amazon, Standard Indirect - 750 litre 822mm x 1700mm (AZ-750-IND) £4,270.00Amazon, Standard Indirect - 1000 litre 822mm x 2314mm (AZ-1000-IND) £4,620.00Coil Duty suitable for Heat Pump (-HP) £492.80S-Plan Primary Controls (SP1) £182.11Differential Bypass Valve (BP) £94.322 Channel Programmer, Hot Water and Heating (X2009-18A) £84.56

PlATe HeAT eXCHANger iNPUTIncludes Plate Heat Exchanger Assembly with Pump, Buffer Thermostat with Relay Wiring

Plate Heat Exchanger Input, 50kW with Thermostatic Control (-HX+HXINUV) £1,063.84Plate Heat Exchanger Input, 100kW without Control (-HX+HXIN) £849.84Plate Heat Exchanger Input, 100kW with Motorised Control (-HX+HXINUV100M) £1,304.27Plate Heat Exchanger Input, 150kW with Motorised Control (-HX+HXINUV150M) £POA

ADDiTioNAl oPTioNS

Increases connection sizes, up to 1.5” (in and out tappings) (-XL) £56.00Increases Pressure Reducing Valve Set to 1” (-IN1) £171.73Increases Pressure Reducing Valve Set to 1.5” (-IN15) £226.76Solar Coil For 150 litre - 200 litre Units (-SOL1) £241.08Solar Coil For 250 litre Units (-SOL2) £270.48Solar Coil For 300 litre - 500 litre Units (-SOL3) £299.88Solar Coil For 750 litre - 1000 litre Units (-SOL4) £749.70For additional Tappings and Coils, please use additional option for Stainless Steel Cylinders

High performance unvented hot water cylinders, supplied with full unvented safety kit, expansion vessel, and immersion heater(s).

Dom

estic

Wat

er S

tora

ge

Ther

mal

Sto

rage

No

Dis

char

ge R

equi

rem

ent

Pre

-Plu

mbe

d &

Pre

-Wire

d

Cas

ed

Ele

ctric

Indi

rect

Boi

ler

Sol

ar

Trip

le C

oil

Top-

Dow

n R

apid

Reh

eatin

g

Hea

t Pum

p

Amazon Unvented

Standard optional

Dom

estic

Wat

er S

tora

ge

Ther

mal

Sto

rage

No

Dis

char

ge R

equi

rem

ent

Pre

-Plu

mbe

d &

Pre

-Wire

d

Cas

ed

Ele

ctric

Indi

rect

Boi

ler

Sol

ar

Trip

le C

oil

Top-

Dow

n R

apid

Reh

eatin

g

Hea

t Pum

p

Standard optional

Product - Capacity Diameter x Height (Part No.) Price (ex. VAT)

PANDorA HeATbANk® THermAl SToreS: STANDArD eleCTriCBase Unit Only with Expansion Vessel, Vent Fitted, 2 x Immersion Bosses and Connections for DHW Heat Exchanger Assembly

Pandora, Standard Electric - 45 litre 480mm x 800mm (PAN400-45-ELC) £596.34Pandora, Standard Electric - 90 litre 530mm x 950mm (PAN-090-ELC) £790.22Pandora, Standard Electric - 110 litre 530mm x 1050mm (PAN-110-ELC) £817.54Pandora, Standard Electric - 130 litre 530mm x 1150mm (PAN-130-ELC) £845.54Pandora, Standard Electric - 150 litre 530mm x 1300mm (PAN-150-ELC) £929.54Pandora, Standard Electric - 180 litre 530mm x 1550mm (PAN-180-ELC) £1,139.07Pandora, Standard Electric - 210 litre 530mm x 1750mm (PAN-210-ELC) £1,176.64Pandora, Standard Electric - 250 litre 530mm x 2000mm (PAN-250-ELC) £1,383.17Pandora, Standard Electric - 300 litre 600mm x 2000mm (PAN500-300-ELC) £1,752.30Pandora, Standard Electric - 415 litre 680mm x 2000mm (PAN600-415-ELC) £1,970.75Immersion Heater Controller (+IHC) £128.13

The above units will require a Hot Water Heat Exchanger Assembly (X2009-2-22P or X2009-2P) and 2 x Immersion Heaters (X2009-16A)

PANDorA HeATbANk® THermAl SToreS: STANDArD iNDireCTBase Unit Only with Expansion Vessel, Vent Fitted, 1 x Immersion Boss, Indirect Primary Coil and Connections for DHW Heat Exchanger Assembly

Pandora, Standard Indirect - 110 litre 530mm x 1050mm (PAN-110-IND) £943.54Pandora, Standard Indirect - 130 litre 530mm x 1150mm (PAN-130-IND) £971.54Pandora, Standard Indirect - 150 litre 530mm x 1300mm (PAN-150-IND) £1,055.54Pandora, Standard Indirect - 180 litre 530mm x 1550mm (PAN-180-IND) £1,262.77Pandora, Standard Indirect - 210 litre 530mm x 1750mm (PAN-210-IND) £2,104.62Pandora, Standard Indirect - 250 litre 530mm x 2000mm (PAN-250-IND) £1,343.97Pandora, Standard Indirect - 300 litre 600mm x 2000mm (PAN500-300-IND) £1,752.30Pandora, Standard Indirect - 415 litre 680mm x 2000mm (PAN600-415-IND) £1,920.35Y Plan Controls (+YP) £122.27S Plan Controls (+SP) £182.11Differential Bypass Valve (+BP) £94.32Two Channel Programmer (+X2009-18A) £84.56

The above units will require a Hot Water Heat Exchanger Assembly (X2009-2-22P or X2009-2P) and 1 x Cylinder Stat (X2009-8P)An optional Backup Immersion Heater can be added using code X2009-16A

STANDArD oPTioNSFor additional options, please refer to the options available on Stainless Steel Cylinders and Xcel HEATBANK® including extra Tappings, Coils and Control Assemblies

Mains Hot Water Plate Heat Exchanger (30 lpm) (X2009-2-22P) £661.02Mains Hot Water Plate Heat Exchanger (45 lpm) (X2009-2P) £749.313kW Immersion Heater (X2009-16A) £109.96Cylinder Thermostat for Indirect Systems (X2009-8P) £117.01

PANDorA HeATbANk® THermAl SToreS: DiSTriCT HeATiNg, iNDireCT PHeIncludes Indirect Plate Heat Exchanger Assembly, Cylinder Thermostat, DHW Plate, Heat Exchanger Assembly, 3kW Immersion Heater, Spare Heater Boss, Primary Flow Regulation, Control & Security Valves

Pandora, District PHE - 150 litre 530mm x 1300mm (PAN-150-DH1) £3,228.40Pandora, District PHE - 150 litre Slim 430mm x 1790mm (PAN-350-150-DH1) £3,272.72

the UK’s No. 1 supplier of Flue, chimney & renewable energy solutions0800 90 20 220 // www.specflue.com

Pandora HeAtBANK®

The Pandora HEATBANk® is for providing mains pressure hot water and central heating. The store is unpressurised and manually filled. It requires no overflow or pressure discharge arrangements, making it ideal for flats and retro-fit.

E&OE

Product (Part No.) Price (ex. VAT)

PelleT SToVeSEgo Air inc sides (52EAS) £2,109.00Ego Hydro inc sides (52EHS) £3,009.00Musa Air inc sides (52MAS) £2,499.00Musa Hydro 15 inc sides (52MH15) £3,099.00Musa Hydro 22 inc sides (52MH22) £3,699.00Primula Air inc sides (520A) £2,112.00Primula Hydro inc sides (52PHS) £4,168.00Gardenia Air inc sides (52GAS) £1,699.00Gardenia Hydro inc sides (52GHS) £3,149.00Dalia Air inc sides (52DAS) £1,499.00100mm Diameter MCZ Elbow Adaptor with 80mm Connection (3104MCZR) £62.53

biomASS boilerSCompact 18 inc Circulation Pump kit1 (52C18k) £4,057.76Compact 24 inc Circulation Pump kit1 (52C24k) £4,229.48 Compact 35 inc Circulation Pump kit1 (52C35k) £5,279.48Tecnika Log Boiler 28kW (52T28) £4,070.00Tecnika Log Boiler 35kW (52T35) £4,685.00Logika Pellet Boiler 25kW (52L25) £8,545.00Logika Pellet Boiler 35kW (52L35) £9,020.00Logika Pellet Boiler Refill 25kW (52LR25) £9,000.00Logika Pellet Boiler Refill 35kW (52LR35) £9,465.00Praktica 28 Boiler inc Hopper and Auger Left Handed (52P28BkL) £4,199.00Praktica 28 Boiler inc Hopper and Auger Right Handed (52P28BkR) £4,199.00Praktica 33 Boiler inc Hopper and Auger Left Handed (52P33BkL) £4,899.00Praktica 33 Boiler inc Hopper and Auger Right Handed (52P33BkR) £4,899.00

ACCeSSorieS200kg Remote Hopper (52RH200) £640.00Raised Base for 200kg Remote Hopper (52RH200RB) £260.00400kg Remote Hopper (52RH400) £1,150.00Raised Base for 400kg Remote Hopper (52RH400RB) £430.00100mm diameter 90 Degree Female Tee (3104042) £69.65150mm diameter 90 Degree Female Tee (3106042) £52.52System Loading/Circulation Pump with Valves (5240A11221)* £724.50Installation Hose kit (52CHk1) £87.00Filling Loop kit (52CFL) £89.002m Pellet Auger System (52PA2) £630.002.3m Pellet Auger System to connect 200kg & 400kg Hoppers (52PA23) £1,010.00Electronic Controller for Pellet Level Sensor (52ECPLS) £270.00Pellet Extraction kit for Compact 18 and Compact 24 (remote blown delivery) including Pipe and Sensors (52PEk) £1,699.00Pellet Extraction kit for Compact 35 (remote blown delivery) including Pipe and Sensors (52PEkC352002) £1,751.88Big Bag System (52BBH2023) £3,143.073.4m Auger for use with Third Party Hopper (52NSPEkA2024) £3,328.56

All quoted prices include delivery to Uk mainland only. Products held in stock will be delivered within three working days. If a product is out of stock we will notify you of approximate delivery times on receipt of your order. For trade discounts or prices for any products not listed, please contact your local Business Development Manager. For delivery of non-listed items, please allow up to 15 working days.

* Upgrade/specification change due – Contact Sales for current information1 Price includes the MCZ/Red Installation Kit (ensures compliance to water regulations and the MCZ warranty conditions). Kit includes Esbe valve, HE circulation pump kit and MCZ flexible connection hose kit.

Pellet stoves & Biomass BoilersOur range of pellet stoves and biomass boilers are fully programmable; much like traditional gas boilers they use thermostats and time controlled systems.

Com

pact

18

Com

pact

24

Com

pact

35

Logi

ka 2

5

Logi

ka 3

5

Logi

ka 2

5 R

efill

Logi

ka 3

5 R

efill

Tecn

ika

28

Tecn

ika

35

Pra

ctik

a 28

Pra

ctik

a 33

Pel

let S

tove

s

Standard must be used with extraction kit Hydro only

Product (Part No.) Price (ex. VAT)

SolAr

Solar Flat Plate Collector (54kS2SLP) £499.00Bracket for Two Panels – On Roof >30° ( 54KSOL2) £149.00Bracket for Extra Panel – On Roof >30° (54KSOL1) £99.00Components for Two Panels – Pipe Connections (54ZPKS2) £44.00Extra Panel Components – Connectors (54KS34) £4.50Masking Profile KSL (54KSL) £10.00B1 Accessory kit - Standard Pump Assembly and DTC Control Unit, Expansion and Discharge Tank (54B1001) £599.00B2 Accessory kit - Extra Pump Assembly for East/West Array and Connectors (54B2001) £310.00B3 Accessory kit - Roof Installation and Flashing kit (54B3001) £149.00B4 Accessory Kit (15 metres) – Twin Insulated Flexi Pipe (54B415001) £279.00B4 Accessory Kit (25 metres) – Twin Insulated Flexi Pipe (54B425001) £619.00B5 Accessory kit - Automatic Air Venting kit (54B5001) £43.00B6 Accessory kit - System Drain and Fill kit (54B6001) £35.00In Roof Two Panel Flashing kit (54F65163) £229.00Additional Panel Flashing kit (54F65164) £69.00Two Panel Support A Frame for Roof <20° (54KSOLC2) £159.00Additional Panel A Frame Support for Roof <20° (54KSOLC1) £99.00Adjusting Arm for One Panel On Roof 20°-30° (54KSOLA1) £99.00Adjusting Arm for Two Panels On Roof 20°-30° (54KSOLA2) £149.00Solar Transfer Fluid (54SOLPG2001) £69.00

All quoted prices include delivery. Products held in stock will be delivered within three working days. If a product is out of stock we will notify you of approximate delivery times on receipt of your order. For trade discounts or prices for any products not listed, please contact your local Business Development Manager. For delivery of non-listed items, please allow up to 15 working days.

the UK’s No. 1 supplier of Flue, chimney & renewable energy solutions0800 90 20 220 // www.specflue.com

solarOur flat plate collectors are universal and can be used for individual houses, housing blocks and public and industrial buildings.

E&OE

Specflue

8 Curzon RoadChilton Industrial EstateSudburySuffolkCO10 2XW

Tel: 0800 90 20 220Fax: 0845 13 07 555sales@specflue.com

www.specflue.com

Price List

Renewable Energy TrainingOur Training Division offers a variety of renewable energy courses, catering for all levels and interests, in our new, state of the art, renewables training centre. Whether you are looking for product knowledge, awareness training or installer courses leading to MCS accreditation, we have the course for you.

For further details, please contact us on:

0800 90 20 220training@specflue.com