2013 PRICE LIST Final - Primary Sales Australia · RETAIL PRICE LIST FOR PRIMARY SALES ... January...
Transcript of 2013 PRICE LIST Final - Primary Sales Australia · RETAIL PRICE LIST FOR PRIMARY SALES ... January...
2013 TILLAGE PRICE LIST
Page 1 Points #1 to #33....tipped and plainPage 2 Points #41 to #97...all tungsten tippedPage 3 Primary Precision Seeder parts, Primary Coil TinesPage 4
Assemblies...Contour Drill and Paralink modules, Page 6 Fertiliser boots, brackets and clipsPage 7 Seed (or single shoot) bootsPage 8 Adaptors, residue deflectors, liquid applicators, Vanda clampsPage 9 Bolts, nuts , etc.Page 10 Terms and conditions, Warranty statement
Presswheels, Coulters, Disc Seeding modules, UTS tinesPage 5
Use this list in conjunction with the 2013 Product Guide
Australian Made and Australian Owned
2013 Product Guide
Designers, Manufacturers and Wholesalers to the Agriculture and Mining Industries
Head Office and Production Perth
Eastern Area Branch Dubbo
South Australian Branch
c/- K.T.I. Trans. 112 Glenroy St. Athol Park S.A. 5012
Ph: (08) 8345 4118 Fax:(08) 8345 5257
Email: [email protected]
44 Meliador Way, Midvale W.A. 6056Ph: (08) 9250 3500 Fax: (08) 9250 3600
Email: [email protected]
129 Fitzroy St, Dubbo N.S.W. 2830Ph: (02) 6882 2844 Fax: (02) 6882 6419
Email: [email protected]
WELCOME TO THE CURRENT AUSTRALIAN DOMESTIC TILLAGE RETAIL PRICE LIST FOR PRIMARY SALES AUSTRALIA. MOST OF THE POPULAR PRODUCTS ARE LISTED HERE. FOR ALL OTHER PRICES, CONTACT YOUR LOCAL DEALER OR PRIMARY SALES AUSTRALIA.
Visit our website at www.primarysales.com.au CLAREWOOD PTY. LTD ABN 79 245 186 094 as TRUSTEE FOR PRIMARY SALES AUSTRALIA TRUST, TRADING AS PRIMARY SALES AUSTRALIA
January 2013 Tillage Price List
TUNGSTEN CARBIDE
TIPPEDPRICE
Exc GSTPRICE
Inc GST
PART NO. DESCRIPTION
PR 1-T
PR 2-DB
PR 3-T
PR 4-T
PR 5-T
PR 7-T
PR 8-T
PR 9-T
PR 9-DB
PR 10-T
PR 11-T
PR 12-T
PR 13-T
PR 14-T
PR 15-T
PR 16-T
PR 16-2-T
PR 17-T
PR 17-2-T
PR 18-T
PR 20-T
PR 21-T
PR 22-T
PR 23-T
PR 25-T
PR 26-T
PR 27-T
25.25
35.15
26.05
26.50
29.15
25.90
31.50
33.20
40.30
35.50
35.55
36.45
37.75
44.25
36.15
43.20
45.00
42.90
46.15
44.25
34.10
33.40
34.65
27.65
41.80
38.90
56.00
27.78
38.67
28.66
29.15
32.07
28.49
34.65
36.52
44.33
39.05
39.11
40.10
41.53
48.68
39.77
47.52
49.50
47.19
50.77
48.68
37.51
36.74
38.12
30.42
45.98
42.79
61.60
4 ½” Combine
4 ½” Deep blade, direct drill
4” Combine, low profile
5” Combine
5” Horwood Bagshaw combine
1 ½” Cultivator / ripper
6” Cultivator, 44° stem angle
7” Cultivator, 44° stem angle
7” Deep blade cultivator
8” Cultivator, 44° stem angle
2 ½” Scarifier / ripper
6” Scarifier buster
7” Scarifier
8” Scarifier, low profile
2 ½” Cultivator
6” Cultivator (7/16” bolts)
6” Cultivator (½” bolts)
7 ½” Cultivator (7/16” bolts)
7 ½” Cultivator (½” bolts)
2 ½” Chisel plow
6” Cultivator, 35° stem angle
7” Cultivator, 35° stem angle
8” Cultivator, 35° stem angle
2” Cultivator / combine
9” Scarifier, low profile
2 ½” HB Stubblemaster ripper
8” HB Stubblemaster scarifier PR 30-DB
PR 30-2-DB
PR 31-DB
PR 31-2-DB
PR 33
PR33-SGL
8” Deep blade cultivator (7/16” bolts)
8” Deep blade cultivator (1/2” bolts)
6” Deep blade cultivator (7/16” bolts)
6” Deep blade cultivator (½” bolts)
1/2" Knife point for JD 1870 Conserva pak
Shin guard (long) for JD 1870 Conserva pak
52.50
53.50
51.50
53.50
81.00
30.85
57.75
58.85
56.65
58.85
89.10
33.94
PL 1
( “T” = TIPPED)
Revised prices across the full Primary Sales product range are effective 1st. January 2013. These prices are expressed in A$, are recommended retail ex-Perth, Dubbo or Adelaide and apply only to the Australian domestic marketplace. Prices and product specifications are subject to change without notice. Purchases may be made through our comprehensive network of Agricultural Machinery Dealers or Agricultural Merchandise outlets.
PRICE Exc GST
PRICE Inc GST
14.00
14.80
15.25
14.65
24.25
24.30
25.20
26.50
33.00
33.00
22.85
22.15
23.40
16.40
30.55
27.65
44.75
15.40
16.28
16.78
16.12
26.68
26.73
27.72
29.15
36.30
34.65
25.14
24.37
25.74
18.04
33.61
30.42
49.23
PLAIN(UNTIPPED)
View or download this list from our web site at www.primarysales.com.au
PRIMARY POINTS Tipped and plain PR-1 to PR-33
MOST POPULAR PRODUCTS ARE LISTED HERE. FOR ALL OTHER PRICES CONTACT YOUR LOCAL DEALER OR P.S.A.
For a brief statement of PSA trading terms and conditions of sale, see foot of Website home page.
PART NO. PRICEExc GST
PRICEInc GST
PR 41
PR 42
PR 44
PR 45
PA-15554
PA-15555
PA-15557
PR 50
PR 51
PR 54
PR 54HD
PR 55
PR 57
PR 60
PR 60 HD
PR 63
PR 64
PR 64-1
PR 84-DB
PR 84-DB-TW
PR 86-DB
PR 86-DB-TW
PR 86-DB-ATW
PR 87
PR 90
PR 91
PR 92M
PR 92M-TW
PR 93
PR 93-TW
PR 94
PR 94-TW
PR 94-DB
PR 94-DB-TW
PR 96-DB
PR 96-DB-TW
PR 96-DB-ATW
PR 97
71.90
82.00
69.40
78.25
84.30
77.50
18.50
35.40
27.90
36.50
37.50
45.20
45.90
54.00
51.60
60.40
57.40
68.00
73.00
70.50
Scarifier Super Seeder (50mm wing)
Scarifier Super Seeder (50mm T.C. wing)
Super Seeder, heavy duty (60mm wing)
Super Seeder, heavy duty (60mm T.C. wing)
Super Seeder, heavy duty (angled T.C. wing)
Knife point, 16mm, heavy duty (two x 1/2”bolts)
“Thomas Tine” point (no Tungsten Carbide)
Knife point, 20mm (single bolt, 7/16”)
Mini T - boot
Mini T - boot (T.C. wing)
Baker style T-boot
Baker style T-boot (T.C. wing)
Super Seeder (50mm wing, single bolt 7/16”)
Super Seeder (50mmT.C. wing)
Super Seeder (60mm wing deep blade, h / duty)
Super Seeder (60mm, T.C. wing)
Super Seeder (60mm wing, two x 7/16” bolts)
Super Seeder (60mm T.C. wing)
Super Seeder (60mm angled T.C. wing)
Knife point, 12mm (two x 7/16” bolts)
CONCORD - PSA replacement parts
Knife point to suit Anderson opener, 150mm long
Knife point PR 60, with extra TC and side prot’n
Wedge plate, to suit Anderson opener
Full wing plate 7” wide “ “ (inc. bolt & nut)
Full wing plate 6“ wide “ “ “ “
71.50
79.50
41.50
56.20
56.50
13.35
78.65
87.45
45.65
61.82
62.15
14.69
79.09
90.20
76.34
86.08
92.73
85.25
20.35
38.94
30.69
40.15
41.25
49.72
50.49
59.40
56.76
66.44
63.14
74.80
80.30
77.55
2 ½” Chisel plow slip-on tip
Spear point for use with PA42-1 adaptor
Slip-on Knife point 12mm, cast, heat treated, (includes roll pin)
Slip-on Super Seeder, cast, heat treated, (includes roll pin)
“Slimline” wedge for ½” bolts @ 45mm centres
“Slimline” wedge for 7/16” bolts @ 45mm centres
“Slimline” wedge for ½” bolts @ 57mm centres
MORRIS ‘GUMBO’ - PSA replacement parts
Knife point, cast Nihard,90mm long
Deep Knife point, cast Nihard,130mm long
Full 4” wing plate, with Tungsten Carbide protection
Full 4” wing plate, heavy duty with TC protection
Full 5” wing plate, with Tungsten Carbide protection
Side plate LH or RH
53.00
32.00
93.00
112.00
15.00
15.00
15.00
58.30
35.20
102.30
123.20
16.50
16.50
16.50
DESCRIPTIONFor Bourgault
3310 & 3320 Paralink parts, see listing P5
For Morris Contour Drill parts,
see listing P5
PL 2
PRIMARY POINTS (cont’d) PR 41 to PR 97WITH TUNGSTEN CARBIDE (T.C.) WEAR PROTECTION
8686
MOST POPULAR PRODUCTS ARE LISTED HERE. FOR ALL OTHER PRICES CONTACT YOUR LOCAL DEALER OR P.S.A.
8787
91.50
108.50
29.30
94.00
92.00
100.65
119.35
32.23
103.40
101.20
January 2013 Retail Tillage Price List
PART NO.
PRIMARY PRECISION SEEDER PARTSDESCRIPTION
PRICEExc GST
PRICEInc GST
Winged point, heat treated,190 mm Tungsten Carbide leading edge
Winged point, heat treated,150 mm Tungsten Carbide leading edge
Knife point, heat treated, 200 mm Tungsten Carbide leading edge
Knife point, heat treated,150 mm Tungsten Carbide leading edge
Roll pin,1” x 3/8” (two req’d per point)
Fertiliser Tube, hot dip galvanised (inc. p’wheel mount bracket)
Fertiliser injector tube with TC wear protection
Liquid fert. tube, stainless steel, for PPS Knife point
Liquid fert. tube, stainless steel, for PPS Winged point
Poly fertiliser cup, complete with stainless T-bolt clamp
Press wheel rim half, galvanised steel
Press wheel tyre, 140mm wide “V”
Reopener, spring steel, heat treated
Seed tube only for 3087 re-opener
25mm Wear plate C/w bolts for 3087 re-opener
40mm Wear plate C/w bolts for 3087 re-opener
38mm Bare rubber boot suits angle-adjustable mount
Angle-adjustable mount for 38mm bare rubber boot
Spring steel mounting bar for angle-adjustable 38mm rubber boot
Roller assembly complete, for roller box assembly
Tail, narrow, 25mm wide, to suit rubber flexiboot 38mm i/d
38mm Forward mount boot C/w bolt and spring washer
Tine leg lower, spring steel, heat treated
Coulter Assembly,single, tine mounted with 60 ripple disc
Short re-opener to suit bolt on wear plate
P P-W-190-3327
P P-W-150-3327
P P-K-200-3325
P P-K-150-3325
P P-RP-3325
P FT-3107
P FT-3003
P FT-3325-LIQK
P FT-3327-LIQW
P FT-PFC-3001
P PW-RH-2873
P PW-TYWV-2965
P ST-3087
P ST-3087-4
P ST-3087-WP25
P ST-3087-WP40
P ST-AALRB
P ST-AAMOUNT
P ST-RBBSS-FM
P T-FTRAC-3275
P ST-LRBTL-25
P ST-LRB-38-FM
P T-LTS-3339
P CLT-STM-60
P ST-3087-SH
142.00
132.00
124.90
112.00
ea1.00
104.05
56.50
39.50
25.10
23.63
26.00
109.00
21.53
17.25
0
20.50
31.70
20.70
16.70
38.80
15.23
30.50
99.50
917.50
22.50
20.2
156.20
145.20
137.39
123.20
ea1.10
114.46
62.15
43.45
27.61
25.99
28.60
119.90
23.68
18.98
22.22
22.55
34.87
22.77
18.37
42.68
16.75
33.55
109.45
1009.25
24.75
Coil tine clamp plate for 3” RHS
Coil tine clamp plate for 4” RHS*
PCT fixed fertiliser tube 35mm O.D.
Coil tine dual banding clamp
Coil tine height adjuster (long)
Coil tine locker for 3” RHS*
Coil tine locker for 4” RHS*
Mud shield for coil tine fertiliser boot
Coil tine bracket for single or dual shoot
Coil tine bracket (short) for single shoot
Residue deflector (trash tube) for coil tine
Residue deflector for PCT-FT-235 and PCT SBB-3
Splayed “U” bolt with Nyloc nuts to suit 3” RHS*
Splayed “U” bolt with Nyloc nuts to suit 4” RHS*
Primary coil tine, Diamond mount (L or R hand)
Primary coil tine, Vertical mount (L or R hand)
*
PRICEInc G S TPART NO. PRIMARY COIL TINES
14.00
14.90
37.30
5.35
7.10
22.20
23.63
8.25
18.00
17.60
27.00
27.00
11.50
11.80
161.00
161.00
15.40
16.39
41.03
5.89
7.81
24.42
25.99
9.08
19.80
19.36
29.70
29.70
12.65
12.98
177.10
177.10
PCT CP3A
PCT CP4A
PCT FT-235
PCT FT-HC
PCT HA-2
PCT L75A
PCT L102A
PCT MUD-1
PCT SBB-2
PCT SBB-3
PCT TT-3
PCT TT-4
PCT UB3A
PCT UB4A
PCT D-LH or RH
PCT V-LH or RH
*Other sizes available to order
PRICEExc G S T
PL 3
PRIMARY PRECISION SEEDER & COIL TINE parts
MOST POPULAR PRODUCTS ARE LISTED HERE. FOR ALL OTHER PRICES CONTACT YOUR LOCAL DEALER OR P.S.A.
January 2013 Retail Tillage Price List
PRIMARY “UTS” TINES (low disturbance)PRICE
Exc GST PRICE
Inc GSTPART NO.
UTS-P-1
UTS-P- FAB-04
UTS-T-CC-EO
UTS-T-FC550-2
UTS-T-SMALE-HD
UTS-FT-1
UTS-FT-2
UTS-FT-3
UTS-SBB-1
UTS-RD-2
K-
Ultra-T-Seeder point, cast, with Tungsten Carbide protection
Knife point with tungsten carbide protection
Primary tine to suit Concord edge-on shank
Primary tine to suit Flexicoil 550 and later 350
Primary tine to suit Smale Heavy duty tine
Fertiliser tube for double shoot (welded assemblies)
Fertiliser tube for double shoot (bolted assemblies)
Fertiliser tube for double shoot (20mm mount plate)
Bracket for single-shoot boot
UTS Residue deflector (trash guard)
Tines and boots to suit many models are available to order
94.80
110.00
58.60
170.00
195.00
41.00
44.00
42.80
15.25
18.50
104.28
121.00
64.46
187.00
214.50
45.10
48.40
47.08
16.78
20.35
PL 4
PRICEExc G S T
PRICEInc G S T
PRESS WHEEL ASSEMBLIES
COULTER ASSEMBLIES
CLT-TBM-60 Coulter assembly, Twin bar-mount, 60 ripple disc, c/w mounting hardware
CLT-TBM-60-HDA
Coulter assembly, Single bar-mount, 60 ripple disc, c/w mounting hardware
Replacement 500mm dia. 60 ripple disc
Coulter assembly, Twin bar-mount, heavy duty, adjustable, 60 ripple disc
CLT-TBM-60-HD Coulter assembly, Twin bar-mount, heavy duty, fixed row, 60 ripple disc
CLT-SBM-60
PRICEExc G S T
PRICEInc G S T
For Combines, Cultivators and Chisel Plows: Dual wheel & Heavy duty walking beam, with H/D adjustable mounting gear: 15” dia. with 80mm”V” tyre on steel rim 932.00 1025.20 15” dia. with 100mm “V” tyre on steel rim 1016.00 1117.60 Single wheel assembly, H/ duty, with H/D adjustable mounting gear: 15” dia. with 80mm “V” tyre on steel rim 582.00 640.20 15” dia. with 100mm “V” tyre on steel rim 624.00 686.40 Single wheel assembly, medium duty 15" dia. with 80mm V tyre for narrow rows 564.00 620.40 Precision Seeder 16” dia. Wide or Narrow “V” on steel rim (please specify) 624.00 686.40 Additional cost for Travel Limiters (for h/duty wing-mounted assemblies) 13.00 14.30
TWIN DISC SEEDING ASSEMBLIES PART NO.
DSM-TWIN18BMWV Twin 18” disc seeding module, bar mount, complete with wide ‘V’ presswheel tyre 1,958.00 2,153.80 DSM-RMS-201 Rotary mud scraper 29.50 32.45 CLT-PD-SB-18-04 Single-bevel 18” disc 65.00 71.50
1036.00 1139.60
1260.00 1386.00
1130.00 1243.00
795.00 874.50
69.00 75.90
PRESSWHEEL, COULTER, DISC SEEDING Assemblies and UTS low disturbance tines
PRICEExc G S T
PRICEInc G S T
MOST POPULAR PRODUCTS ARE LISTED HERE. FOR ALL OTHER PRICES CONTACT YOUR LOCAL DEALER OR P.S.A.
January 2013 Retail Tillage Price List
PL 5
MORRIS and BOURGAULT Module replacement parts
MOST POPULAR PRODUCTS ARE LISTED HERE. FOR ALL OTHER PRICES CONTACT YOUR LOCAL DEALER OR P.S.A.
MORRIS CONTOUR DRILL - PSA replacement parts
PART NO.MO-CD-LIQ-TMO-CD-MT-32MO-CD-PMO-CD-SHANKMO-CD-SBBMO-CD-STC 25-32
MO-CD-TLMO-CD-WINGMO-PW-RHPWHEEL-T-AVH100
Liquid tube to suit MO-CD-TL, 5/16” od stainless Steel fertiliser tube suit 32mm ID hose Replacement point for MO-CD-TL Shank - one piece tine leg / point Single shoot bracket to suit shank Steel seed tube, curved, for single and d. shoot assy (25mm opener)
Tine leg Assy c/w M10 x 35 G10.9 bolt & nuts x 4 Wing for Morris paired row system Press wheel rim halves, 5 stud, suit Morris contour drill (pair) 15” tyre only 100mm “V” section hard rubber
16.5012.8086.00
115.0039.6550.00
104.0076.0052.00
109.00
18.1514.0894.60
126.5043.6255.00
114.4083.6057.20
119.90
PRICEExc G S T
PRICEInc G S T
BOURGAULT 3310/3320 Paralink - PSA replacement parts
PRICEExc G S T
PRICEInc G S T
BG-3310-PBG-3310-TA
B G-3310-STPoint to suit Paralink fitted with BG-3310-TATine adaptor to suit Paralink
Seed tube to suit Paralink “ “ “80.0085.00
46.5088.0093.50
51.15
PART NO.
B G-3310-STC Seed tube, curved, to suit Paralink “ “ “ 53.25 58.58
These parts are suitable for 3310 and 3320 SE and QDA variants
MO-CD-STC 40-32 Steel seed tube, curved, for single and d. shoot assy (40mm opener) 51.50 56.65
(A plastic liquid tube can be fitted to this assembly)
MO-C2-DS-FT Contour 2 Fert tube adjustable 46.00 50.60MO-C2-LIQ Contour 2 Liquid tube 10mm 19.50 21.45MO-C2-P Contour 2 Straight point 82.00 90.20MO-C2-RD Contour 2 Residue deflector 25.00 27.50MO-C2-STC-40 Contour 2 Seed tube (3 holes) for 32mm id hose 51.50 56.65MO-C2-TL Contour 2 Short tine leg 104.00 114.40MO-C2-WING Contour 2 Wing for Morris paired row system 78.00 85.80MO-CD2-SHANK Contour 2 Shank - one piece tine leg / point 126.00 138.60MO-CD2-P Contour 2 Point (10° angle, superseded) 82.00 90.20 Other superseded designs available in limited quantities POA A single shoot bracket will be available for this season POA
PRICEExc G S T
PRICEInc G S TPART NO.
MORRIS CONTOUR 2 - PSA replacement parts
DESCRIPTION
January 2013 Retail Tillage Price List
PRICEExc G S T
PRICEInc G S T
PART NO.
FERTILISER BOOTS, BRACKETS and CLIPS
½” x 57mm bolthole centres (for Flexicoil 550 etc.)
½”holes, for Edge-on Flexicoil tine
7/16” holes x 45mm centres
½” holes x 45-50mm centres
½” holes x 57mm centres
45-57mm centres (Ezee-on, Bourgault, Horwood Bagshaw)
Forward Eng 2800, Gason 2100)
AFM 340lb.
AFM Scarichisel and others, see P. 18
for Gas application (½” holes x 57mm ctrs)
7/16” holes x 45mm centres
½” holes x 45-50mm centres
½” holes x 57mm centres
Ezee-on, Bourgault, Horwood Bagshaw
Forward Eng 2800, Gason 2100
AFM 340lb.
AFM Scarichisel and others, see P. 21
for scarifiers with PSA foot conversion
Fert. tube for J.D. 275, Fwd 270/ 853
Fert. tube for most single bolt cultivators / drills
½” x 45mm bolthole centres (for Morris etc.) 51.45
51.45
50.30
51.50
51.50
51.50
51.50
51.50
51.50
51.50
65.00
52.50
52.50
52.50
55.00
52.50
52.50
52.50
52.50
46.00
42.80
56.60
56.60
55.33
56.65
56.65
56.65
56.65
56.65
56.65
56.65
71.50
57.75
57.75
57.75
60.50
57.75
57.75
57.75
57.75
50.60
47.08
ST-DPB-CF2-5
ST-DPB-CF3
ST-DPB-EO-F
ST-DPB-F1
ST-DPB-F2-5
ST-DPB-F3
ST-DPB-F4
ST-DPB-F6
ST-DPB-F7
ST-DPB-F8AFM
ST-DPBF3Gas
ST-DPB-LF1
ST-DPB-LF2-5
ST-DPB-LF3
ST-DPB-LF4
ST-DPB-LF6
ST-DPB-LF7
ST-DPB-LF8
ST-DPB-LF9
ST-FE270-F
ST-UNI-R35
Clamp bracket for ST-UNI-R35,16mm x 40mm tine
Clamp bracket for ST-UNI-R35,16mm x 50mm tine
Clamp bracket for ST-UNI-R35,16mm x 75mm tine
TCB-U-1640
TCB-U-1650
TCB-U-1675
3.85
4.20
4.75
4.24
4.62
5.23
for edge-on, single bolt tines
for Horwood Bagshaw 25mm Square tine
for Edge-On Flexicoil
45mm centres (two x7/16” holes)
45-50mm centres (two x ½” holes)
57mm centres (two x ½” holes)
45-57mm ctrs (two x ½”holes, flat foot)
16mm x 40mm for ST-SBEO bracket
16mm x 65mm tine
20mm x 55mm for Forward 280 tine
20 x 65mm Edge-on Flexicoil, Ch. Terramaster, JD 300 for Horwood Bagshaw Square tine bracket
23.20
27.25
28.20
29.00
29.00
29.00
29.70
5.45
6.15
5.80
6.50 4.15
25.52
29.98
31.02
31.90
31.90
31.90
32.67
6.00
6.77
6.38
7.15 4.57
ST-SBEO1/2/3/4
ST-SBHB-1SQ
ST-SBEO-FC
ST-SBB-1
ST-SBB-2-5
ST-SBB-3
ST-SBB-4
ST-CB-1640
ST-CB-1665
ST-CB-2055
ST-CB-2065
TCB-U-2525
*
*
Compact fertilser boots
Dual purpose boots
Large dual purpose boot
Single bolt fertiliser boots (& clamps for ST-UNI-R35)
Single boot brackets
*Tine clips to suit SBEO brackets
PL 6
FERTILISER BOOTS, BRACKETS and CLIPS
MOST POPULAR PRODUCTS ARE LISTED HERE. FOR ALL OTHER PRICES CONTACT YOUR LOCAL DEALER OR P.S.A.
January 2013 Retail Tillage Price List
PL 7
SEED BOOTS and Other Components
MOST POPULAR PRODUCTS ARE LISTED HERE. FOR ALL OTHER PRICES CONTACT YOUR LOCAL DEALER OR P.S.A.
COMPONENTS (plates, spigots, etc.) PRICEExc GST
PART NO.
Seed depth plate for single bolt tines (PR91, PR 94)
Flat conn. links for ST-ADJ seed tube (sold in pairs)
Mud shield for edge-on or single bolt tines
Reducer, 35mm O/D to 32mm O/D
Reducer, 38mm O/D to 32mm O/D
Reducer, 44mm O/D to 32mm O/D (more sizes avail.)
Sleeve 65mm long, 32mm O/D, 29mm I/D
Sleeve 65mm long, 35mm O/D, 32mm I/D
Sleeve 65mm long, 38mm O/D, 35mm I/D
“Y” Piece to split delivery for dual boots (35mm O/D)
Tine backing plate, 3mm thick
Tine backing plate, 5mm thick
SDP-1
ST-CL-50
ST-MUD-R
ST-RED 35-32
ST-RED 38-32
ST-RED 44-32
ST-SLEEVE 32
ST-SLEEVE 35
ST-SLEEVE 38
ST-Y-01 35
TBP-3
TBP-5
21.00
ea 2.10
40.30
PRICEInc GST
7.67
5.60
5.60
6.00
3.70
3.75
3.95
3.90
4.10
23.10
ea 2.31
8.44
6.16
6.16
6.60
4.07
4.13
4.35
44.33
4.29
4.51
PRICEInc G S T
PART NO.
ST-ADJ-132/35/38
ST-ADJ-141
ST-FB-32TUBE
ST-FB-32 ROLL
ST-FB-38TUBE
ST-FB-38 ROLL
ST-RFB
ST-RFB-LM
ST-RFB B
ST-RFB M
ST-RB-V-C
ST-RFBTAIL-45
ST-RFBTAIL-C
ST-RFBTAIL-Y
ST-L-RB
ST-L-RB-V-C
ST-LRB-320
ST-LRB-CCLD
ST-LRB-LM
ST-LRBTAIL-45
ST-LRBTAIL-C
ST-LRBTAIL- Y
ST-LRB-TailY80
ST-TWIN-SF1
ST-TWIN-SF2
ST-TWIN-SF3
PRICEExc G S T
32.00
32.00
1.70
145.00
2.20
180.00
34.60
40.00
34.60
34.60
44.75
13.75
14.75
24.10
36.50
48.08
41.60
38.50
42.50
13.75
16.00
24.90
27.20
66.30
66.30
66.30
35.20
35.20
1.87
159.50
2.42198.00
38.06
44.00
38.06
38.06
49.23
15.13
16.23
26.51
40.15
52.89
45.76
42.35
46.75
15.13
17.60
27.39
29.92
72.93
72.93
72.93
Seed Tube (Steel) adjustable 32, 35 or 38mm O.D.
Seed Tube (Steel) adjustable 41mm O.D.
Poly. tube 32mm O/D, per foot
Poly. tube 32mm O/D, per 30m roll
Poly. tube 38mm O/D, per foot
Poly. tube 38mm O/D, per 30m roll
Rubber Flexi boot (32mm ID), exc. tail
Rubber F. boot (low mount) exc. tail
Rubber Flexi boot for Bourgault hose, exc. tail
Rubber Flexi boot to suit Morris hose, exc. tail
Compact F. boot (for Morris etc.) 32mm inc. C tail
Straight 45mm tail to suit rubber Flexi boot
Curved tail to suit rubber Flexi boot
“Y” Splitter tail to suit rubber Flexi boot
Large Rubber boot (38mm ID), exc. tail
Lge compact f. boot (Morris etc.) 38mm inc. C tail
High clearance (320mm long) Flexi boot
Large Rubber f. boot for Concord low-dist.
Lge flexi boot (low mount) exc. tail
Large 45mm Straight tail to suit ST-LRB
Large Curved tail to suit ST-LRB
Large “Y” Splitter tail to suit ST-LRB
“Y” Splitter tail- 80mm wide
Dual tube boot assembly 7/16” x 45mm cts *( inc. steel tube)
Dual tube boot assembly 1/2” x 45mm cts *(inc. steel tube)
Dual tube boot assembly 1/2” x 57mm cts *(inc. steel tube)*Side wings and replacement tubes also available
SEED (or single shoot) BOOTS
January 2013 Retail Tillage Price List
FERTILISER BOOTS, BRACKETS and CLIPS
PL 8
January 2013 Retail Tillage Price List
ADAPTORS, RESIDUE DEFLECTORS,LIQUID APPLICATORS, VANDA-CLAMPS
MOST POPULAR PRODUCTS ARE LISTED HERE. FOR ALL OTHER PRICES CONTACT YOUR LOCAL DEALER OR P.S.A.
PRICEExc G S T
PRICEInc G S T
PART NO. RESIDUE DEFLECTORS
PRICEExc G S T
PRICEInc G S TPART NO. LIQUID APPLICATORS
PRICEExc G S T
PRICEInc G S T
PART NO. VANDA-CLAMP Harrow tine replacements
TT-FC-350
TT-FC-EO
TT-HB-350
TT-JD-C-2
TT-SH-C
TT-SH2-C
Most “C” shank cultivators
Edge-on Flexicoil
Horwood Bagshaw 350 Scaribar
John Deere combine & 270 cultivator
Shearer 580 tine
Shearer 620 tine
Note: Many other models available to order
29.80
29.80
29.80
28.50
29.80
29.80
32.78
32.78
32.78
31.35
32.78
32.78
Clamp plate to suit fert. boot ST-DPB-F1 with PR96
” ” ” ” ” ST-DPB-F2/F4 with PR86
Stainless 6mm tube to suit PR 96, PR 86 Super Seeders
Tube / clamp assy for single boot brkt #1 using PR 96
” ” ” ” ” ” #2 ” PR 86
” ” ” ” ” ” #3 ” ”
” ” ” ” ” ” #4 ” ”
TA-LIQ-DPB-C1
TA-LIQ-DPB-C2
TA-LIQ-TUBE-1
TA-LIQ-SBB-1
TA-LIQ-SBB-2
TA-LIQ-SBB-3
TA-LIQ-SBB-4
13.50
13.50
15.00
28.50
28.50
28.50
28.50
14.85
14.85
16.50
31.35
31.35
31.35
31.35
Clamp (includes bolts and nuts)
Replacement spring steel rod
HC 10
HCR 10
8.50
3.45
9.35
3.80
Exc GSTPRICEInc GST
PART NO. ADAPTORS
Converts Janke tine to accept PR 42 Spear point
C/Plow (57mm ctrs) adaptor for PR 41 Ripper / aerator
Blade to adapt PR-41 to early Agroplow
Blade to adapt PR-41 to Ausplow ripper (spring steel)
For fluted Connor Shea tines to fit PR 91, 94 TW
For wider “D” sect. C. S. tines to fit PR 91, 94 TW
Adaptor for Horwood Bagshaw fluted tines
Adapts 76mm ctrs Chisel plow tines to fit PR 18
Adapts H. B.“square” tines to fit PR 91, PR 94 etc
Replacement foot for Concord 43° transition shank
Replacement foot for Concord 50° transition shank
Retains PR 84 DB-TW on MF, JS, IH scarifier tines
Retains PR 84 DB-TW on CJD scarifier tines
Retains PR 84 DB-TW on CSN scarifier tines
Retains PR 84 DB-TW on HB Series 1 Stubblemaster
Adapts PR 93 to fit Duncan Drill (for double shoot)
Replacement 2-bolthole foot for scarifier tines
Cutting / welding cost for PA-96-SC
PA-42-1
PA-45
PA-48
PA-48-2
PA-54
PA-54D
PA-55
PA-57
PA-63
PA-70-CC
PA-71-CC
PAC-84-1
PAC-84-2
PAC-84-3
PAC-84-4
PA-93-FT
PA-96-SC
PA-96-SC-L
PRICE
29.80
98.50
99.00
99.00
10.60
11.80
10.10
18.00
5.35
80.00
80.00
5.60
6.00
5.40
6.40
64.40
33.40
32.00
32.78
108.35
108.90
108.90
11.66
12.98
11.11
19.80
5.89
88.00
88.00
6.16
6.60
5.94
7.04
70.84
36.74
35.20
FERTILISER BOOTS, BRACKETS and CLIPS
PL 9
January 2013 Retail Tillage Price List ADAPTORS, RESIDUE DEFLECTORS,LIQUID APPLICATORS, VANDA-CLAMPS
MOST POPULAR PRODUCTS ARE LISTED HERE. FOR ALL OTHER PRICES CONTACT YOUR LOCAL DEALER OR P.S.A.
¾” x 5/16” Grade 5
1” x 5/16” Grade 5
1 ½” x 5/16” Grade 5
1 ½” x 3/8” Grade 5
1 ¾” x 7/16” Grade 5*
2” x 3/8” Grade 5
2” x 3/8” Grade 8
2” x 7/16” Grade 5*
2” x 7/16” Grade 8*
2” x ½” Grade 8
2 ¼” x 7/16” Grade 5*
2 ¼” x 7/16” Grade 8*
2 ¼” x ½” Grade 8
2 ½” x 7/16” Grade 5*
2½” x 7/16” Grade 8*
2½” x ½” Grade 8
.55
.70
.85
1.20
1.80
1.45
3.00
2.00
3.25
2.30
2.15
3.60
2.40
2.10
3.70
2.50
.61
.77
.94
1.32
1.98
1.60
3.30
2.20
3.58
2.53
2.37
3.96
2.64
2.31
4.07
2.75
BOLT SIZE
BOLTS ( Supplied complete with Nyloc nuts)
Exc GST Inc GST
BOLT SIZE Exc GST Inc GST
2 ½” x 5/8” Grade 8
2 ¾” x 7/16” Grade 8*
2 ¾” x ½” Grade 8
3” x 7/16” Grade 8*
3” x ½” Grade 8
3 ½” x ½” Grade 8
4.20
4.50
3.00
4.95
2.95
3.50
M10 x 30mm G8.8
M10 x 40mm G8.8
M10 x 50mm G8.8
M10 x 55mm G8.8
M10 x 60mm G10.9
M10 x 65mm G10.9
1.15
1.35
2.00
2.15
3.80
3.90
1.55
1.55
1.95
C/S Plow bolts for Slim wedges:
2½” x 7/16” Bolt & Nyloc*
2½” x ½” Bolt & Nyloc
3” x ½” Bolt & Nyloc
*Exclusive to
Primary Sales!
Heavy Duty
7/16” Nyloc Nuts
supplied with
all 7/16” bolts.
Also available
separately.
4.62
4.95
3.30
5.45
3.25
3.85
1.27
1.49
2.20
2.37
4.18
4.29
1.71
1.71
2.14
PL 10
January 2013 Retail Tillage Price List
TERMS and CONDITIONS
Warranty ProcedureWarranty Claims must be communicated through the Dealer from whom the goods were originally
purchased, who will discuss the claim with you and gather the required information. Our Sales and Marketing Team, will put in place the documentation required to evaluate the claim,
then at its discretion, replace or rectify the goods in question.Many products are “consumable items,” used in highly abrasive or aggressive situations which vary effective service life and hence claims may be assessed subject to these factors and the extent of use.
If appropriate, our Sales and Marketing team will advise you on the most economical method of transporting the goods and what will be required for claim assessment. Freight costs in returning the
goods for warranty to our warehouse is at your expense unless otherwise advised. Freight for replacement goods will be discussed with you prior to despatch and is dependent on the results of the
warranty claim.
Returns for CreditCorrect evaluation of your needs, and reference to our current catalogue will help to minimise the need
for returns. Returns for Credit may only be made through your dealer once approval has been obtained from our Sales and Marketing Team. A written claim for credit from your dealer,
nominating the original Tax Invoice number, must accompany the goods. Prompt action in gaining the approval to return the goods will help minimise account and payment imbalances for your business,
the dealer and ourselves.Our Sales and Marketing team can advise on the most economical method of transporting the goods
and details of restocking fees which may apply.Freight will be at your expense unless otherwise negotiated.
Please mark the goods clearly and pack them adequately for shipment.
Primary Sales Australia is a Manufacturer and Wholesaler of Agricultural machinery products and has a considerable distribution network, consistingof Agricultural Machinery Dealers and Rural merchandise retailers.Sales of product to end-users are effected through this network.Enquiries relating to product selection and features are handled by the Dealer network and supported by the three Primary Sales office locations inPerth, Western Australia, Dubbo, New South Wales and in Adelaide for South Australian clients.These offices will direct any orders placed with them to the nominated or most appropriate Dealer.Supply is made on an ex-works basis, with clients or their Dealers nominating the freight method and any freight insurance required.Requirements, especially presswheels, coulters, seeding modules and Precision Seeder Bars are best secured by placing orders well in advance of the season.
January 2013 Retail Tillage Price List
Visit our website at www.primarysales.com.au
CLAREWOOD PTY. LTD TRUSTEE FOR PRIMARY SALES AUSTRALIA TRUST, TRADING AS PRIMARY SALES AUSTRALIA
ABN 79 245 186 094 as
YOUR DEALER
Cast-to-last tillage pointsPrecision seed & fertiliser placement systems
Presswheel systems Coulters Precision Disc Seeding modules Low-disturbance tine assemblies
Primary coil tines and Convert-a-Drill combine seeder conversions--------------------------------
Adapt-a-Gap header knife guards and extensionsVibra-Mat “live” header platform kits
WCCO header belting--------------------------------
Primary Precision Seeder Bars (specialist dealers)Glenvar Bale Direct system
The Hay Express bale feed-out system-------------------------------
Agricultural research and developmentWelding, fabrication and engineering services
Australian Report Map© copyright Commonwealth of Australia
(Geoscience Australia) 1996 Head Office and Production Perth
Eastern Area Branch Dubbo
South Australian Branch
c/- K.T.I. Trans. 112 Glenroy St. Athol Park S.A. 5012Ph: (08) 8345 4118 Fax:(08) 8345 5257
Email: [email protected]
44 Meliador Way,Midvale W.A. 6056Ph: (08) 9250 3500 Fax: (08) 9250 3600
Email:
129 Fitzroy St,Dubbo N.S.W. 2830Ph: (02) 6882 2844Fax: (02) 6882 6419
Email: