Pressure Dependent Valves - dioda.hu · PDF fileAir Logic/Pressure Dependent Valves AND Gate,...
Transcript of Pressure Dependent Valves - dioda.hu · PDF fileAir Logic/Pressure Dependent Valves AND Gate,...
862
Air Logic/Pressure Dependent ValvesOR Gate, Barbed Fittings for 3 mm Tubing and G 1/8 to G 1/2, 1/8" to 1/4" NPT
(Cross reference this page with Products 2001, Vol. 2 / 8.2-0, 8.2-1) Changes are indicated in blue. Last printing was in 5.02. Subject to change
OR Gate
Type OS-...
OS-...-NPT
(Shuttle Valve)
This unit allows two input signals to becombined in an OR function.
OR gates control cylinders or valves fromvarious positions and logic circuits.
The OR gate has two inputs (X, Y) andone output (A). The valve automaticallyblocks the non-pressurized inlet. If bothinputs are pressurized, the higherpressure is present at outlet A.
Example: Type OS-1/4-B
X, Y = Supply
A = Outlet
Type OS-PK-3
Order Number ISO Connection 6684 OS-PK-3 6681 OS-1/8-B 6682 OS-1/4-B 3427 OS-1/2
Part No./Type NPT Connection 10412 OS-1/8-NPT 10413 OS-1/4-NPT
Medium Compressed air (filtered, lubricated or unlubricated)
Mounting Two holes through housing
Connection Barbed fitting G 1/8 ISO or G 1/4 ISO or 1/4 NPT G 1/2 ISO3 mm 1/8 NPT
Orifice Size 0.095 in / 2.4 mm 0.16 in / 4 mm 0.26 in / 6.5 mm 0.47 in / 12 mm
Standard Nominal Flow Rate 0.12 Cv / 120 l/min 0.50 Cv / 500 l/min 1.17 Cv / 1170 l/min 5.0 Cv / 5000 l/min
Pressure Range* 24 to 120 psi / 15 to 150 psi / 1 to 10 bar1.6 to 8 bar
Design OR Gate (shuttle valve)
Materials Housing: Plastic, brass Housing: Aluminum, blue anodized; Seals: Buna NSeals: Buna N
Weight 0.022 lb / 0.010 kg 0.099 lb / 0.045 kg 0.242 lb / 0.110 kg 1.731 lb / 0.785 kg
Dimensions
a 0.20 in / 5 mm
b 0.75 in / 19 mm
c 0.16 in / 4 mm
d 0.28 in / 7 mm
e 0.39 in / 10 mm
f 0.13 in / 3.4 mm
g 1.02 in / 26 mm
h 0.31 in / 8 mm
i 0.55 in / 14 mm
j 1.58 in / 40 mm
c
e
a
b
d
f
g
h
c
e
a
b d
f
g
h
* 14 to 140°F / -10 to +60°C
XA
Y
Type OS-1/4-BOS-1/4-NPT
Type OS-1/8-BOS-1/8-NPT
Dimensions
a 1.26 in / 32 mm
b 0.12 in / 5 mm
c 0.63 in / 16 mm
d 0.95 in / 24 mm
e 1.57 in / 40 mm
f 0.18 in / 4.5 mm
g 0.32 in / 8 mm
h G 1/8 / 1/8 NPT
Dimensions
a 1.70 in / 45 mm
b 0.32 in / 8 mm
c 0.79 in / 20 mm
d 1.38 in / 35 mm
e 2.17 in / 55 mm
f 0.26 in / 6.6 mm
g 0.47 in / 12 mm
h G 1/4 / 1/4 NPT
1 Barbed fitting for 3 mm tubing
pneu
air
e
Air Logic/Pressure Dependent ValvesDimensions
a
b
c
e
g
d
ef
863Subject to change (Ref. 11.5/10-1) (98)
Type OS-1/2
Dimensions
a 2.76 in / 70 mm
b 0.81 in / 20.5 mm
c 0.35 in / 9 mm
d 2.36 in / 60 mm
e 1.58 in / 40 mm
f 3.15 in / 80 mm
g 0.34 in / 8.5 mm
pneu
air
e
864
Air Logic/Pressure Dependent ValvesTriple OR Gate, Barbed Fittings for 3 mm Tubing
(Ref. 11.4/15-1) (98) Subject to change
Triple OR GateType OS-PK-3-6/3(Shuttle Valve)
3 OR Logic Elements on One Sub-base
Type OS-PK-3-6/3 consists of threeseparate OR logic elements, each withtwo inputs X, Y and one output A. Theinput to which pressure is not applied isautomatically blocked. If differentpressures are applied, the higher pressureis present at A.
Mounting racks for cabinet mounting, seepage 685.
X, Y = SupplyA = Outlet
Order Number Part No./Type 4232 OS-PK-3-6/3
Medium Compressed air (filtered, lubricated or unlubricated)
Mounting Two holes through sub-base, or on rails
Connection Barbed fitting for 3 mm tubing
Orifice Size 0.098 in / 2.5 mm
Standard Nominal Flow Rate 0.10 Cv / 100 l/min
Pressure Range* 24 to 120 psi / 1.6 to 8 bar
Design OR logic element (shuttle valve)
Materials Housing sub-base: Plastic. Seals: Buna N.
Weight 0.198 lb / 0.090 kg
� Barbed fitting for 3 mm tubing
Dimensionsa 0.63 in / 16 mm g 2.52 in / 64 mm m 0.20 in / 5 mmb 0.17 in / 4.4 mm h 0.31 in / 8 mm n 0.39 in / 10 mmc 0.30 in / 7.7 mm i 1.89 in / 48 mm o 0.89 in / 22.5 mmd 0.09 in / 2.3 mm j 2.91 in / 74 mm p 0.71 in / 18 mme 2.95 in / 75 mm k 3.18 in / 80.8 mm q 1.02 in / 26 mmf 3.19 in / 81 mm l 3.48 in / 88.5 mm r 1.06 in / 26.8 mm
* 14 to 140°F / -10 to +60°C
pneu
air
e
Air Logic/Pressure Dependent ValvesAND Gate, Barbed Fittings for 3 mm Tubing, G 1/8
865Subject to change (Cross reference this page with Products 2001, Vol. 2 / 8.2-0, 8.2-1) Changes are indicated in blue. Last printing was in 5.02.
AND Gate
Type ZK-...
Two input signals are combined in theAND function to produce an output signal.
The AND gate has two inputs (X, Y) and one output (A). Output A remainspressurized only if pressure is applied at both inputs. If different pressures are applied, the lower pressure is present at A.
The AND gate is used where two signalsmust be present before a function takesplace in safety circuits, positioningdevices and logic controls.
Example: Type ZK-1/8-B
X, Y = Supply
A = Outlet
Type ZK-PK-3
Order Number Part No./Type 6685 ZK-PK-3 6680 ZK-1/8-B
Medium Compressed air (filtered, lubricated or unlubricated)
Mounting 2 holes through housing
Connection Barbed fitting for 3 mm tubing G 1/8 ISO
Orifice Size 0.094 in / 2.4 mm 0.18 in / 4.5 mm
Standard Nominal Flow Rate (X, Y � A) 0.12 Cv / 120 l/min 0.55 Cv / 550 l/min
Pressure Range* 24 to 120 psi / 1.6 to 8 bar 15 to 150 psi / 1 to 10 bar
Design AND Gate
Materials Housing: Plastic; Seals: Buna N Housing: Aluminum, blue anodized; Seals Buna N
Weight 0.022 lb / 0.010 kg 0.099 lb / 0.045 kg
* 14 to 140°F / -10 to +60°C
c
e
a
b df
g
Type ZK-1/8-B
Dimensions
a 0.20 in / 5 mm f 0.13 in / 3.4 mm
b 0.75 in / 19 mm g 1.02 in / 26 mm
c 0.16 in / 4 mm h 0.32 in / 8 mm
d 0.28 in / 7 mm i 0.55 in / 14 mm
e 0.39 in / 10 mm j 1.58 in / 40 mm
Y XA
Dimensions
a 1.25 in / 32 mm
b 0.19 in / 5 mm
c 0.63 in / 16 mm
d 0.94 in / 24 mm
e 1.57 in / 40 mm
f 0.17 in / 4.5 mm
g 0.31 in / 8 mm
pneu
air
e
866
Air Logic/Pressure Dependent ValvesTriple AND Gate, Barbed Fittings for 3 mm Tubing
(Ref. 11.4/15-2) (98) Subject to change
Triple AND GateType ZK-PK-3-6-6/33 AND Logic Elements on a Sub-base
Type ZK-PK-3-6/3 consists of threeseparate AND logic elements, each withtwo inputs X, Y and one output A. OutputA remains pressurized only if pressure isapplied at both inputs. If differentpressures are applied, the lower pressureis present at A.
Mounting racks for cabinet mounting, seepage 685.
X, Y = SupplyA = Outlet
Order Number Part No./Type 4204 ZK-PK-3-6/3
Medium Compressed air (filtered, lubricated or unlubricated)
Mounting 2 holes through sub-base or on mounting rails
Connection Barbed fitting for 3 mm tubing
Orifice Size 0.098 in / 2.5 mm
Standard Nominal Flow Rate 0.10 Cv / 100 l/min
Pressure Range* 24 to 120 psi / 1.6 to 8 bar
Design AND logic element
Materials Housing: Plastic; Seals: Buna N.
Weight 0.187 lb / 0.085 kg
� Barbed fitting for 3 mm tubing
Dimensionsa 0.63 in / 16 mm g 2.52 in / 64 mm m 0.20 in / 5 mmb 0.17 in / 4.4 mm h 0.31 in / 8 mm n 0.39 in / 10 mmc 0.30 in / 7.7 mm i 1.89 in / 48 mm o 0.89 in / 22.5 mmd 0.09 in / 2.3 mm j 2.91 in / 74 mm p 0.71 in / 18 mme 2.95 in / 75 mm k 3.18 in / 80.8 mm q 1.02 in / 26 mmf 3.19 in / 81 mm l 3.48 in / 88.5 mm r 1.06 in / 26.8 mm
* 14 to 140°F / -10 to +60°C
pneu
air
e
pneu
air
e
pneu
air
e