Presents… Syntech’s range of sewer cleaning equipment…

18
Presents…

Transcript of Presents… Syntech’s range of sewer cleaning equipment…

Presents…

Syntech’s range of sewer cleaning equipment…

Syntech Engineers is a Singapore based company that manufactures a wide range of Sewer Cleaning products.

Among them are:

Vacuum Tankers Sewer Jetters

Combination Machine

Vacuum Tankers

Our range of vacuum tankers ranges from 1,500 to 15,000 litres. In addition, the vacuum suction rate (free air capacity) of our vacuum pump ranges from 3,250 lpm to 133,000 lpm. Vacuum pumps, (vane, liquid ring and blower type) can be powered by truck transmission PTO, split shaft PTO or by separate engine.

Transmission of power to the vacuum pump can be by means of direct coupling, by transmission belt or by hydrostatic drive.

Range of Vacuum Tankers

1. SM - 350 1,600 lit2. SM - 700 3,000 lit3. SM - 1200 5,400 lit4. SM - 2300 10,000 lit5. SM - 3300 15,000 lit

Model Tank Capacity

SM - 350

Tank Capacity: 1,600 litPump Type: Vane pumpCapacity: 3250 lpmSystem Weight: 700 Kg

SM - 800

Tank Capacity: 3,500 litPump Type: Vane pumpCapacity: 7000 lpmSystem Weight: 1400 Kg

SM - 1200

Tank Capacity: 5,500 litPump Type: Vane pumpCapacity: 9000 lpmSystem Weight: 1950 Kg

SM - 2300

Tank Capacity: 10,000 litPump Type: Vane pump /Liquid RingCapacity: 9,000 to 15,000 lpmSystem Weight: 2,400 to 2,600 Kg

SM - 3300

Tank Capacity: 15,000 litPump Type: Vane pump /Liquid RingCapacity: 15,500 to 40,000 lpmSystem Weight: 3,200 to 3,500 Kg

Vane Type Vacuum Pumps

Hydraulic Tank Tipping

Hydraulic Rear Door

Suction Hose-reel

Dial Gauge Indicator

Sewer Jetters

Our range of sewer jetters ranges from a flow rate of 30 lpm to as high as 423 lpm. Pressure ranges from 100 bar to 300 bar. High pressure water pump can be powered by truck transmission PTO, split shaft PTO or by separate engine.

Transmission of power to the vacuum pump can be by means of direct coupling, by transmission belt or by hydrostatic drive.

Range of Sewer Jetters

We do not produce specific model for sewer jetters at the present moment. All jetters produced are based on customers’ specifications. The reason is that the range of possible supply is so wide we are unable to satisfy most of our customers’ needs if we narrow down specific models.

The range of requirements are as follows:

1. Pump flow rate and pressure2. Size of water tank3. Material of water tank – i.e. steel, fiber glass or polyurethane?4. Drive mechanism – separate engine or truck engine?5. System configuration – truck mounted, van mounted, skid

mounted, trailer mounted?

Range of Sewer Jetters

Truck-mounted Jetter

Van-mounted Jetter

Skid-mounted Jetter

Combination Unit Our range of Combination Units is also quite diversified. They

are as follows:

1. Combination Unit without recycling2. Combination Unit with recycling3. Combination Unit without boom 4. Combination Unit with boom (manual/hydraulic)

However we do have a standard model in which we had already produced many units in the past. The model is our MSC 13

MSC -13

Debris Tank : 6.5 cu mWater Tank : 6 cu mVacuum Pump: 83,000 lpmWater Pump: 263 lpm at 155 barRecycling System: 270 lpmHydraulic System: Rear Door,

Tipping, Hose-reel, Suction Boom