PRACTICE ORIENTED MASTER PROGRAMMES IN ENGINEERING … · PRACTICE ORIENTED MASTER PROGRAMMES IN...

PRACTICE

ORIENTED

MASTER PROGRAMMES IN

ENGINEERING

IN RU, UA, UZ

Zaporizhzhya National Technical University Ukraine

Report on the activities carried out during 36 months (from October 2010 to October 2013)

ZNTU Project Team

Alexander

Andriyenko

‐

team leader, vice‐ rector of Humanitarian Affairs and

International Relations.

Anatoly Pritula

– deputy team leader, head of the Software Tools department.

Ravil

Kudermetov

– head of the Computer Systems and Networks department.

Anzhelika

Parkhomenko

‐

Ph.D., assistant professor of Software tools department.

Galina Tabunshchik

‐


Anna Nelasa

‐


Larisa Duiko

‐

leading specialist of International relations

department

Zaporizhzhya National Technical University

Main results of the project (1‐year)

Has been performed analysis of the current curricula / subjects in ZNTU for Master degree according to 7 specialties/42 disciplines

related to Electrical Engineering:1.Electrical machines and apparatus2.Electromechanical automation systems and electric drive3.Radio electronic devices and tools4.Micro‐and nanoelectronic

devices and equipment

5.Computer systems and networks6.Specialized computer systems 7.Software Systems




Earmarked departments involved to the project:

•Electrical Machines and Apparatus Department •Software Tools Department•Computer Systems and Networks Department•Protection of Labor and the Environment Department

Developed education programsfor new disciplines and modules:1.

Applied Informatics and digital Data transmission systems2.

CAD/ CAM /CAE‐systems in design and manufacturing of high‐tech

products

3.

Quality Engineering4.

Environment Management and Engineering5.

Problems Solving for Engineering6.

Modeling of production

systems7.

Re‐Engineering 8.

Audit and Certification according ISO9.

Soft Skills for Engineers





Order for creation ELM‐office Statement about ELM-office

Dissemination

of

project results

(1‐year)


Designed and manufactured project posters

Dissemination of project results (1‐year)


•International Conference on "Technical and economic problems of engineering in Russia, Uzbekistan, Ukraine“, November‐

December, 2010, Samara•Annual scientific‐practical conference

ZNTU «Science Week 2011», Zaporizhzhya, April 2011

•Information about the project is available in the periodicals of Zaporizhzhya

:

‐

"The position" № 9 (350), March 2011,‐

"Mechanical Engineer" February, 2011

Dissemination

of

project results

(1‐year)

http://zntu.edu.ua/base/mv/promeng/index.html


http://zntu.edu.ua/base/mv/promeng/index.html


020406080

25.04.2012

CAD/ CAM /CAE‐systems in designand manufacturing ofhigh‐tech products Modelingmanufacturingsystems

Applied Informaticsand Datatransmission systems

SOFT SKILLS

Poll of students to explore their views in the development of the updated curricula


Modernization curricula for Masters degrees

according to the specialties:

Electrical Machines

Systems software

Information technology of design

Computer Systems and Networks

Specialized computer systems



To the "Software systems“ Master curriculum

were included disciplines:

Soft Skills for Engineers

–

2

ECTS

Problems Solving for Engineering ‐ 2 ECTS

Quality Engineering

‐

3 ECTS

Audit and Certification according ISO ‐

2 ECTS



To the «Information technology of design»

Master curriculum

were included disciplines:

CAD/ CAM /CAE‐systems in design and manufacturing of

high‐tech products ‐

10 ECTS

Modeling of production systems–

3 ECTS

Re‐Engineering – 2 ECTS



To

the "Computer systems and networks" and "Specialized Computer System" Master curricula was

introduced

discipline "Applied Informatics and digital data transmission systems" ‐

5 credits



The first students (bachelors) pilot group (2011‐2012):Gleb

Dzhigil, Jaroslav

Zalyubovskiy, Eugene Sevryuk, Anna Luneva


Webinars Altium

Designer

"Acquaintance with the possibilities of Altium

Designer», 05.03.2012

"Getting started and setting working area Altium

Designer», 15.03.2012

"Development of libraries and component models in Altium

Designer», 22.03.2012

The development of electrical schematic diagram in Altium

Designer», 05.04.2012




Teachers

training

atVilnius

Technical

University

(May, 2012)



Teachers

trainingin TUB

(August, 2012)



Teachers

trainingin

Lessius

(August, 2012)


Creo

1.0/Creo Elements‐Pro

5

ALTIUM Designer


MathCAD

Licensed

Software

obtained

by ZNTU:

CAD/CAM/CAE laboratory


Laboratory

of

digital

data

transmission




Welcome from Sergiy

Byelikov, rector of ZNTU (October, 2012)

Master‐class on Soft Skills (October, 2012)



Master‐class on CAD / CAM / CAE systems Pro/Engineer/Creo

and Altium

Designer

(October, 2012)

Master‐class on the Environmental issues (October, 2012)

Agreement on cooperation with employers, concluded in the framework of the project


Software tools department signed agreements on scientific and

technical cooperation with the following enterprises:

•PJSC "Motor Sich";•Research and Production

Enterprise "Khartron‐YUKOM“;• PJSC

"Zaporozhtransformator"

Dissemination

of

project results

(2‐year)

An article in the newspaper of Zaporizhzhya

National Technical University devoted to the results of the teachers

training in the EU universities was published:Duiko

L.N. Training of the ZNTU teaching staff in the EU

universities according to the project PROMENG// Mechanical Engineer , №

4 (2099), October 2012. – P. 3.

The live television coverage devoted the results of PROMEG was made at the Zaporizhzhya

TV Company “Alex”


Dissemination

of

project results

(2‐year)

•Annual scientific‐practical conference ZNTU «Science Week 2012»,

Zaporizhzhya, April 2012•13th International scientific‐practical

seminar «Practice and development perspectives in higher school», Taganrog,

June 2012•VI International scientific‐technical

conference «Modern problems and achievements in the field of radio,

telecommunications and information technology», Zaporizhzhya,

September

2012


Discipline Depart- ment

Knowledge assessment

Level Num. of St.

Cre- dits

Con- tact

h

Ind. work h

1 CAD/CAM/CAE systems in design and manufacturing of high- tech products

Software Tools

exam, course project

MsC 3 10 144 216

2 Soft Skills for Engineers Software Tools

test MsC 6 2 32 40

3 Modelling of production systems

Software Tools

course project MsC 3 3 32 76

4 Problems Solving for Engineering

Software Tools

test MsC 6 2 32 40

Courses and Modules started in autumn 2012


Courses

and

Modules

started in spring 2013


Discipline Depart- ment

Knowledge assessment

Level Num. of St.

Cre- dits

Con- tact

h

Ind. work

h1 Re-engineering Software

Toolsexam MsC 3 2 32 40

2 Quality engineering Software Tools

test MsC 6 3 48 60

3 Audit and Certification according to ISO

Software Tools

test MsC 6 2 32 40

4 Applied informatics and digital data transmission systems

Computer systems and networks

exam MsC 18 5 64 116


Training manuals prepared by the project


Agenda for ELM‐

OfficePromotion materials


http://pks‐zntu.org.ua/index.php/pratsevlashtuvannia

Meetings

with

employers, organized

by ELM‐office


PJSC

"Zaporozhtransformator"

PJSC

"Dneprospecstal

"


The second students

(bachelors) pilot group (2012‐2013):

Olga GladkovaSergei CoursonAndrei Yarkovoy


Monitoring mission of National TEMPUS Office Ukraine in ZNTU (April 2013)


Representatives of employers took part in the event

Extra

Master class in ZNTU (august 2013)


Concluding of cooperation agreement between ZNTU and University Ku Leuven (august 2013)


Diploma and course projects using obtained software


0

5

10

15

20

25

Diploma Ma Diploma Ba Course projects

201220132014

Main

project results

(3‐year)


Dissemination

of

project results

(3‐year)

http://promeng.zntu.edu.ua/implementation.htmlhttp://zntu.edu.ua/mizhnarodniy-osvitniy-proekt-programi-tempus-promeng


Dissemination

of

project results

(3‐year)


•XII International Conference “The Experience of Designing and application of

CAD Systems in Microelectronics (CADSM 2013)”, Polyana Svalyava (Zakarpattya),

February 2013

•IX International Conference “PERSPECTIVE TECHNOLOGIES AND METHODS IN MEMS

DESIGN

(MEMSTRCH 2013)”, Polyana Svalyava

(Zakarpattya)

, April

2013

Dissemination

of

project results

(3‐year)

Annual scientific‐practical conference ZNTU «Science Week 2012»,

Zaporizhzhya, April 2012

International scientific‐practical conference "PRACTICE AND PROSPECTS

OF PARTNERSHIP IN HIGHER EDUCATION“, April 2013, Donetsk

International Conference

“Quality strategy in industry and education “,

May ‐

June 2013, Varna, Bulgaria


Dissemination

of

project results

(3‐year)

International Conference

"Cooperation between universities and enterprises in the

field of IT outsourcing (ICCUBITO 2013)“, June 2013, Kharkov

The 7th IEEE International Conference on Intelligent Data Acquisition and Advanced Computing Systems Technology and

Applications (IDAACS 2013), September 2013, Berlin


Joint publications with European partners

Gladkova

O.N.

Information

technology

in

outsourced

staff

training

/ O.N.

Gladkova, M.A.

Orlov, A.V.

Parhomenko

/ / Radioelectronics

and

Informatics

№ 1 (60). ‐

Kharkov: KNURE, 2013. ‐

P. 84‐86

Arras P. E‐learning Concept for the Properties of Materials Remote Study/ P. Arras, G. Tabunshchyk, T. Kozík

//

Proc. of the 2013 IEEE 7th

International Conference on Intelligent Data Acquisition and Advanced Computing Systems (IDAACS’2013) Berlin, 2013,

Vol2. – P. 742‐747


Connection with the project partners

Peter ArrasDirk Van Merode

Andre Voet

Arnold SterengartDmitriy

Ostroverkhov

Elena Eingorn

Zoryana Herasymchuk

Natalya Oleksiv

Andrey

Ferents

Natalia Martyniuk

Valeriy

Dmitriev

Yuriy

Saenko

Guzel

HairulinaZair

Ushakov


Contact Information

E‐mail:[email protected]@[email protected]

URL:http://zntu.edu.ua/

Address:Zaporizhzhya

National

Technical UniversityZhukovskogo

Str, 64

ZaporizhzhyaUkraine 69063

Telephone:+38‐061‐2244237(Alexander Andriyenko)

PRACTICE ORIENTED MASTER PROGRAMMES IN ENGINEERING … · PRACTICE ORIENTED MASTER PROGRAMMES IN...

Documents

Transcript of PRACTICE ORIENTED MASTER PROGRAMMES IN ENGINEERING … · PRACTICE ORIENTED MASTER PROGRAMMES IN...