PPT Ch.1 DC Circuits
description
Transcript of PPT Ch.1 DC Circuits
![Page 1: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/1.jpg)
CHAPTER 1
DC CIRCUITS
![Page 2: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/2.jpg)
Linear elements : In an electric circuit, a linear element is an electrical element with a linear relationship between current and voltage. Resistors are the most common example of a linear element; other examples include capacitors, inductors, and transformers.
Nonlinear Elements :A nonlinear element is one which does not have a linear input/output relation. In a diode, for example, the current is a non-linear function of the voltage . Most semiconductor devices have non-linear characteristics.
Active Elements :The elements which generates or produces electrical energy are called active elements. Some of the examples are batteries, generators , transistors, operational amplifiers , vacuum tubes etc.
Passive Elements :All elements which consume rather than produce energy are called passive elements, like resistors, Inductors and capacitors.
![Page 3: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/3.jpg)
In unilateral element, voltage – current relation is not same for both the direction. Example: Diode, Transistors.
In bilateral element, voltage – current relation is same for both the direction. Example: Resistor
Ideal Voltage Source: The voltage generated by the source does not vary with any circuit quantity. It is only a function of time. Such a source is called an ideal voltage Source.
Ideal Current Source: The current generated by the source does not vary with any circuit quantity. It is only a function of time. Such a source is called as an ideal current source.
Resistance : It is the property of a substance which opposes the flow of current through it. The resistance of element is denoted by the symbol “R”. It is measured in Ohms.
![Page 4: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/4.jpg)
Ohm’s Law:The current flowing through the electric circuit is directly proportional to the potential difference across the circuit and inversely proportional to the resistance of the circuit, provided the temperature remains constant.
+ _v (t)i(t)
Rv (t) = R i(t)
+_ v (t)i(t)
Rv (t) = R i(t)_
(2.1)
(2.2)
![Page 5: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/5.jpg)
Basic Laws of CircuitsOhm’s Law:
Directly proportional means a straight line relationship.
v(t)
i(t)
R
The resistor is a model and will not produce a straight linefor all conditions of operation.
v(t) = Ri(t)
![Page 6: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/6.jpg)
About Resistors:
The unit of resistance is ohms( ).
A mathematical expression for resistance is
lRA
2
: ( )
: ( )
:
l Thelengthof theconductor meters
A Thecross sectional area meters
The resistivity m
(2.3)
![Page 7: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/7.jpg)
We remember that resistance has units of ohms. The reciprocal of resistance is conductance. At one time, conductance commonly had units of mhos (resistance spelled backwards).
In recent years the units of conductance has been established as simians (S).
Thus, we express the relationship between conductance and resistance as
1GR
(2.4)
We will see later than when resistors are in parallel, it is convenientto use Equation (2.4) to calculate the equivalent resistance.
(S)
![Page 8: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/8.jpg)
Example 2.1.Ques. Consider the following circuit . Determine the resistance of the 100W bulb.
+
_1 1 5 V R M S
(a c )R(1 0 0 W a tt lig ht bu lb)
V
2
22
2 115 132.25100
VP VI I RR
VR ohmsP
Sollution:
A suggested assignment is to measure the resistance of a 100 watt lightbulb with an ohmmeter. Debate the two answers.
(2.5)
![Page 9: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/9.jpg)
Circuit Definitions
Node – any point where 2 or more circuit elements are connected together Wires usually have negligible resistance Each node has one voltage (w.r.t. ground)
Branch – a circuit element between two nodes
Loop – a collection of branches that form a closed path returning to the same node without going through any other nodes or branches twice
![Page 10: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/10.jpg)
Example 2:How many nodes, branches & loops?
![Page 11: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/11.jpg)
Three nodes
![Page 12: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/12.jpg)
![Page 13: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/13.jpg)
![Page 14: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/14.jpg)
Kirchhoff’s Current Law
As a consequence of the Law of the conservation of charge, we have:
• The sum of the current entering a node (junction point) equal to the sum of the currents leaving.
I a
I b
I c
I d
I a , I b , I c , a n d I d c a n e a c h b e e ith e r a p o s itiv eo r n e g a tiv e n u m b e r.
Ia + Ib = I c + Id
![Page 15: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/15.jpg)
Example 2.2.Find the current I x.
4 A 2 A
-1 A 6 A
IX9 A
Ans: IX = 22 A 14
Highlight the boxthen use bring tofront to see answer.
![Page 16: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/16.jpg)
-8 A
-3 A
-5 A
-2 A
Example 2.3Find the currents IW, I X, IY, IZ.
1 2 AI X I Y
I Z
6 A
9 A2 A
I W
IW =
IX =
IY =
IZ =
![Page 17: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/17.jpg)
Kirchhoff's Voltage Law (KVL)
The algebraic sum of voltages around each loop is zero Beginning with one node, add voltages across each branch
in the loop.
(if you encounter a + sign first) and subtract voltages (if you encounter a – sign first)
Σ voltage drops - Σ voltage rises = 0 Or Σ voltage drops = Σ voltage rises
![Page 18: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/18.jpg)
Circuit Analysis When given a circuit with sources and
resistors having fixed values, you can use Kirchoff’s two laws and Ohm’s law to determine all branch voltages and currents
+ 12 v -
I7Ω
3Ω
AB
C
+ VAB -
+
VBC
-
![Page 19: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/19.jpg)
By Ohm’s law: VAB = I·7Ω and VBC = I·3ΩBy KVL: VAB + VBC – 12 v = 0Substituting: I·7Ω + I·3Ω -12 v = 0Solving: I = 1.2 A
+ 12 v -
I7Ω
3Ω
AB
C
+ VAB -
+
VBC
-
![Page 20: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/20.jpg)
Example Circuit
Solve for the currents through each resistor And the voltages across each resistor
![Page 21: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/21.jpg)
Example Circuit
Using Ohm’s law, add polarities andexpressions for each resistor voltage
+ I1∙10Ω -
+ I2∙8Ω -
+ I3∙6Ω -
+ I3∙4Ω -
![Page 22: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/22.jpg)
Write 1st Kirchoff’s voltage law equation
-50 v + I1∙10Ω + I2∙8Ω = 0
+ I1∙10Ω -
+ I2∙8Ω -
+ I3∙6Ω -
+ I3∙4Ω -
![Page 23: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/23.jpg)
Write 2nd Kirchoff’s voltage law equation
-I2∙8Ω + I3∙6Ω + I3∙4Ω = 0 or I2 = I3 ∙(6+4)/8 = 1.25 ∙ I3
+ I1∙10Ω -
+ I2∙8Ω -
+ I3∙6Ω -
+ I3∙4Ω -
![Page 24: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/24.jpg)
We now have 3 equations in 3 unknowns, so we can solve for the currents through each resistor, that are used to find the voltage across each resistor
Since I1 - I2 - I3 = 0, I1 = I2 + I3 Substituting into the 1st KVL equation -50 v + (I2 + I3)∙10Ω + I2∙8Ω = 0 or I2∙18 Ω + I3∙ 10 Ω = 50 volts
![Page 25: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/25.jpg)
But from the 2nd KVL equation, I2 = 1.25∙I3
Substituting into 1st KVL equation: (1.25 ∙ I3)∙18 Ω + I3 ∙ 10 Ω = 50 volts I3 ∙ 22.5 Ω + I3 ∙ 10 Ω = 50 volts I3∙ 32.5 Ω = 50 volts I3 = 50 volts/32.5 Ω I3 = 1.538 amps
![Page 26: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/26.jpg)
Since I3 = 1.538 amps I2 = 1.25∙I3
I2 = 1.923 amps
Since I1 = I2 + I3, I1 = 3.461 amps
The voltages across the resistors: I1∙10Ω = 34.61 volts I2∙8Ω = 15.38 volts I3∙6Ω = 9.23 volts I3∙4Ω = 6.15 volts
![Page 27: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/27.jpg)
D.C. Transient response The storage elements deliver their energy to the resistances,
hence the response changes with time, gets saturated after sometime, and is referred to the transient response.
![Page 28: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/28.jpg)
Solution to First Order Differential Equation
)()()( tfKtxdt
tdxs
Consider the general Equation:-
Let the initial condition be x(t = 0) = x( 0 ), then we solve the differential equation:
)()()( tfKtxdt
tdxs
The complete solution consists of two parts: • the homogeneous solution (natural solution)• the particular solution (forced solution)
![Page 29: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/29.jpg)
The Natural Response
/)(,)()(
)()(
,)()(
0)()(
tN
N
N
N
NNNN
N
etxdttxtdx
dttxtdxtx
dttdx
ortxdt
tdx
Consider the general Equation :-
Setting the excitation f (t) equal to zero,
)()()( tfKtxdt
tdxs
It is called the natural response.
![Page 30: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/30.jpg)
The Forced Response
0)(
)()(
tforFKtx
FKtxdt
tdx
SF
SFF
Consider the general Equation:-
Setting the excitation f (t) equal to F, a constant for t 0
)()()( tfKtxdt
tdxs
It is called the forced response.
![Page 31: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/31.jpg)
The Complete Response
)(
)()(
/
/
xe
FKe
txtxx
tS
tFN
Consider the general Equation:-
The complete response is: • the natural response + • the forced response
)()()( tfKtxdt
tdxs
Solve for ,
)()0()()0()0(
0
xxxxtx
tfor
The Complete solution:
)()]()0([)( / xexxtx t
/)]()0([ texx called transient response
)(x called steady state response
![Page 32: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/32.jpg)
Natural Response: The solution of the differential equation represents are response of the circuit. It is called natural response.
Force Response: The response must eventually die out, and therefore referred to as transient response. (source free response)
![Page 33: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/33.jpg)
Transient response of LR Series Circuit
RL
+V L-
i(t)
+_ Vu(t)
ktRiVRL
sidesbothgIntegratin
dtRiV
Ldi
VdtdiLRi
)ln(
,
…..(i)
![Page 34: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/34.jpg)
0,
]ln)[ln(
ln,0)0(
/
/
tforeRV
RVi
oreV
RiV
tVRiVRL
VRLkthusi
LRt
LRt
where L/R is the time constant
From equation (i), at t=0
![Page 35: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/35.jpg)
![Page 36: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/36.jpg)
Transient Response of RC Series CircuitWe are interested in finding how voltage Vc(t) change with time? We also assume that voltage across the capacitor is zero at t<0. Using Kirchhoff's voltage law across the only loop in circuit we can find the find the equation relating Vc, Vr and V. Using the character equation of capacitors, resistors i.e.
![Page 37: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/37.jpg)
![Page 38: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/38.jpg)
Important ConceptsThe differential equation for the circuit Forced
(particular) and natural (complementary) solutions
Transient and steady-state responses1st order circuits: the time constant ()2nd order circuits: natural frequency (ω0) and
the damping ratio (ζ)
![Page 39: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/39.jpg)
Time Constant of RC and RL
The time taken to reach 36.8% of initial current in an RC circuit is called the time constant of RC circuit.
Time constant (t) = RC.
The time taken to reach 63.2% of final value in a RL Circuit is called the time constant of RL circuit.
Time constant (t) = L / R
![Page 40: PPT Ch.1 DC Circuits](https://reader036.fdocuments.net/reader036/viewer/2022062400/577c79911a28abe054932983/html5/thumbnails/40.jpg)
THANK YOUTHANK YOU