Pinball Tubulator Mach III

7
Pinball Tubulator Pinball Tubulator Mach III Mach III By: Alec Whinery By: Alec Whinery Robert Patterson Robert Patterson Evan Chaudhuri Evan Chaudhuri Joseph Kenneth Brewer Joseph Kenneth Brewer Jack Goble Jack Goble

description

Pinball Tubulator Mach III. By: Alec Whinery Robert Patterson Evan Chaudhuri Joseph Kenneth Brewer Jack Goble. This is us. Introduction. Our project’s goal was to make a rollercoaster. Our parts were mostly found around the house. - PowerPoint PPT Presentation

Transcript of Pinball Tubulator Mach III

Page 1: Pinball Tubulator  Mach III

Pinball Tubulator Pinball Tubulator Mach IIIMach III

By: Alec WhineryBy: Alec WhineryRobert PattersonRobert PattersonEvan ChaudhuriEvan Chaudhuri

Joseph Kenneth BrewerJoseph Kenneth BrewerJack Goble Jack Goble

Page 2: Pinball Tubulator  Mach III

This is usThis is us

Page 3: Pinball Tubulator  Mach III

IntroductionIntroduction

• Our project’s goal was to make a Our project’s goal was to make a rollercoaster.rollercoaster.

• Our parts were mostly found around Our parts were mostly found around the house. the house.

• We purchased 50 ft. of vinyl tubing We purchased 50 ft. of vinyl tubing that cost roughly 20 dollars.that cost roughly 20 dollars.

• We also used Airsoft pellets for the We also used Airsoft pellets for the ball the cost of which was around 6 ball the cost of which was around 6 dollars.dollars.

Page 4: Pinball Tubulator  Mach III

What it doesWhat it does

• Uses a ruberband to launch the Uses a ruberband to launch the projectileprojectile

• Completes one loopCompletes one loop• Goes through a series of sprialsGoes through a series of sprials• Ends in a mazeEnds in a maze

Page 5: Pinball Tubulator  Mach III

Pinball Tubulator Mach Pinball Tubulator Mach IIIIII

Page 6: Pinball Tubulator  Mach III

Energy Subsystems Energy Subsystems

• Launcher Launcher – Elastic Potential Energy to Kinetic EnergyElastic Potential Energy to Kinetic Energy

• LoopsLoops– CentripetalCentripetal accelerationacceleration

• SpiralSpiral– Gravitational Potential Energy to Kinetic Gravitational Potential Energy to Kinetic

EnergyEnergy

• MazeMaze– Collisions Collisions

Page 7: Pinball Tubulator  Mach III

ConclusionsConclusions

• The building of the project took 5 hours of The building of the project took 5 hours of work by all five team members. This time was work by all five team members. This time was used to design, build, yell at, and break used to design, build, yell at, and break “Pinball Tubulator Mach III.”“Pinball Tubulator Mach III.”

• We encountered some problems including:We encountered some problems including:– Making physics work (Thank you Einstein and Making physics work (Thank you Einstein and

Newton)Newton)– Making a standard slopeMaking a standard slope– Having the ball get stuck halfwayHaving the ball get stuck halfway

• Thank you and lets finish up now!!!Thank you and lets finish up now!!!We want to go on break!!We want to go on break!!