Petzl Sport Catalog 2011 En

2011

TOOLS AND TECHNIQUES

Sharing expertiseMy father, Fernand Petzl, was an artisan and explorer with a passion for caving. For him, creating and refining equipment was a profound pleasure. He was an obsessive, creative worker who offered his ideas to help his companions by producing the tools they needed to explore the caves of Chartreuse and Vercors (France). From my childhood, I was immersed in this enthusiasm for discovery. Afterwards, at Petzl, we have always started with this idea:designing tools for the people who use them. Tools that help them progress and commit in vertical or dark terrain. Innovative, useful, safe tools, often designed above and beyond the requirements of existing gear. Petzl has introduced changes to practices and techniques that have allowed revolutions to take place in activities related to lighting and verticality - the two areas of expertise in the company. The headlamp in the mountains, the GRIGRI in climbing For forty years innovation has been at the heart of our business - and it remains so now more than ever. By its very nature, progression has no limits:we are constantly inventing new solutions, and there is no reason for this to stop. Today I hope that we share the experience and technical expertise we have acquired at Petzl as widely as possible with those who participate in these activities. It is with the desire to continue to propose and share solutions for progression that we have prepared this 2011 edition of the Petzl catalogue. Paul Petzl President

1

2

SOLUTIONS

Sean Villanueva-ODriscoll route finding on Shepton Spire, Torssukatak Fjord, Cape Farewell, Greenland


www.petzl.com

Ben Ditto

Sport climbingPartner check:safety check between partners

C

Climber check by belayer: Proper tie-in with tight knot

Belayer check by climber: Rope positioned correctly in belay device Locked carabiner Knot tied at end of rope

3

www.petzl.com

Information is non-exhaustive. Refer to the other pages as well as to the user instructions and technical manuals. Technical training is essential.

limbing with zero risk is, of course, impossible. However, learning the right moves, both for climbing and for using the equipment, significantly reduces the risk of accident. But this learning is not everything. Force of habit, over-confidence, and fatigue can all reduce vigilance. For greater security, why not take advantage of the fact that there are usually two climbers? Particularly before really getting started, when the equipment is being put into place. At the crag, as in the mountains, making it a rule to partner check before leaving the ground will make the climbing more relaxed.

Sport climbingPartner check:safety check between partners

Jocelyn Chavy

"Seriously, Dad, I never thought this could happen to you!" This is how my twelve-year-old son Vincent scolded me a few weeks after I had landed at his feet on a cement floor after a 10-meter fall in a Grenoble climbing gym. I can still hear the voices coming through the fog of my bewildered conscience: "He wasnt tied in look, the rope is still hanging from the top!" I hadnt completed my knot? Impossible! Not me! And yet Yet it had been a Sunday like any other. Sure, I was a bit tired, a little preoccupied, and in a somewhat noisy gym. Nothing extraordinary, really. It was nether the serac fall of the century, nor the collapse of the West Face of the Drus! No reassuring explanation to help me accept the unacceptable. Reasoning only increased my incomprehension. In my twentyfive years of amateur mountaineering and climbing, never an accident, not even a close call. Maybe one time a few rocks heard falling a bit too close Im quite a safety fanatic, according to my friends. A case in point: I had even backed up my sons belay to an over-stuffed pack.

And yet that Sunday I made an error that could have cost me my life. So, was it fate? No! A simple oversight: counting on only your own vigilance shows a dangerous lack of humility. Any day, a seemingly innocent series of events can lead to what many experts have sadly experienced. This one day could be your last. However, with a simple partner check of equipment prior to climbing, it is easy to practically remove this type of risk. Participants in other exposed activities, such as divers, have understood and implemented this concept for a long time. Why not we climbers, mountaineers and cavers? It is time for us, specially the regular participants, to adopt new habits. Romain Lcot Petzl General Director

4

www.petzl.com

Sport climbingBacking off a single pitch:descending and removing gear

Y

ou are unable to climb any higher! The lead climber is stuck at a bolt in the middle of a pitch. The easiest option is to be lowered on top-rope, leaving the quickdraws and asking someone to collect them later, or collecting them yourself after climbing a route next to it. If none of these options is possible, how can you descend and clean the route with limited risk?Information is non-exhaustive. Refer to the other pages as well as to the user instructions and technical manuals. Technical training is essential.

Lafouche

Descend on a single bolt?

Lower or rappel? 115 daN 115 daN 9090 daN daN

7070 kg kg

7070 kg kg

7070 kg kg

Avoid the risk of breakage When it is difficult to estimate the strength of a bolt, it is necessary to use a technique that takes into account the risk of the anchor breaking.

Stress on the bolt The stress on the bolt is approximately 25daN higher with lowering than with rappelling (for two people of 70kg). This number is negligible compared to the strength required of a bolt (2500daN). The stresses placed on a bolt when lowering or rappelling are therefore practically identical. Lowering is therefore recommended since it allows the climber to remain tied in throughout the lowering process.

5

www.petzl.com

Sport climbingBacking off a single pitch:descending and removing gearTechniques for lowering when backing off a climb

Lowering off two points

Lowering with Prusik

Transfer weight to your feet to reduce tension on the quickdraw. Place a quick link in the bolt between the quickdraw and the rock. Thread the rope through the quick link; lock it tightly. Remove the quickdraw. Lower to the next bolt. Repeat the operation. Descend and clean the route.

Consequences of a broken bolt If the top bolt breaks, the climber will be held by the second bolt.

Transfer weight to your feet to reduce tension on the quickdraw. Place a quick link in the bolt between the quickdraw and the rock. Thread the rope through the quick link; lock it tightly. Make a Prusik knot with a cordelette and attach it to the belay loop of your harness with a locking carabiner. Remove the quickdraw. Descend and clean the route.

Consequences of a broken bolt If the top bolt breaks, the climber will be held under the next quickdraw by the Prusik knot. Technique tested on a 4m fall with an 80kg weight, using a 7mm Prusik cordelette and a single 9.7mm rope. Observations: fall arrested cordelette and rope intact

The Prusik knot is a multidirectional knot, jamming in both directions.

SPEEDY

AmD

7mm cordelette for Prusik

6

www.petzl.com

Product list is non-exhaustive. Find a complete list of products and descriptions in the products section.


Multi-pitch climbingSelf-rescue:ascending to the anchor after falling in an overhangInstalling the ascending system

1 - Install the TIBLOC ascender using a locking carabiner. Make a knot at the end of a sling and clip it into the carabiner. This will be your footloop. Place the quickdraw into the sling above the knot. The length of the sling should allow you to stand up in it for ascending.

2 - Stand up to attach the quickdraw to the harness. This maneuver creates slack in the rope above the tie-in knot.

I

n multi-pitch climbs, a situation can quickly become complicated and delicate. For example, when finishing an overhang, the leader falls and finds him/herself hanging in midair, under the roof. Imagine that it is impossible to grab the rope or the rock, or to be lowered by the second (not enough rope). The only solution is to be autonomous and ascend the rope alone. The TIBLOC ascender, REVERSO3 belay device, slings and quickdraws will play a key role. On multi-pitch routes, they should never be forgotten!

3 - With a locking carabiner, place the REVERSO3 on the harness in Reverso mode. Install the rope in the REVERSO3 with a second locking carabiner and take up all the slack in the rope.

4 - Stand up in the sling to remove the quickdraw. Sitting in the harness will transfer your weight onto the REVERSO3.

7

www.petzl.com

Lafouche


Multi-pitch climbingSelf-rescue:ascending to the anchor after falling in an overhangAscending5 - Begin ascending. No need to go quickly; rather, establish a good rhythm.

Caution:keep your thumb on the TIBLOC during the entire ascent.

Move the TIBLOC up the rope, stand in the sling and simultaneously take up the slack in the REVERSO3. For maximum efficiency, keep the body aligned with the rope. Sit in the harness, return the hand to the free end of the rope near the REVERSO3 and repeat the maneuver.

TIBLOC

AmD

STANNEAU 120 cm

REVERSO 3

ANGE FINNESSE

8

www.petzl.com



Multi-pitch climbingQuickdraws and carabiners:placement and clipping

C

Tony Lamiche

More information at: www.petzl.com

ANGE L and ANGE S

Ultra-light, compact carabiners with MonoFilKeylock system. Contact surfaces designed to extend the life of the carabiner and limit rope wear Straight nose to optimize clipping and unclipping Extra-wide 23mm opening (ANGES) MonoFilKeylock system H-profile provides an excellent strength-to-weight ratio ANGE L ANGE S

9

www.petzl.com


lipping a carabiner or quickdraw is a basic technique associated with the progression of a climber. At first glance, nothing too complicated. In the detail, though, there are many aspects to consider in order to move quickly and surely:in particular, placement of the quickdraw into the bolt in relation to the rope, and methods of clipping the rope. For example, when clipping a half rope in the middle of a crux with a small carabiner, good clipping skills are a must Here are some tips for making life easier and climbing in peace.

Multi-pitch climbingQuickdraws and carabiners:placement and clippingPlacing the quickdrawNote:always use the same carabiners for the anchor-end or the rope-end. Never put an anchor-end carabiner on the rope-end. An anchor-end carabiner may become slightly nicked with use. During a fall, if the rope rubs on such a nick, it can become damaged and require early retirement.2 3Information is non-exhaustive. Refer to the other pages as well as to the user instructions and technical manuals. Technical training is essential.

1

1

2

2

3

3

Always use a quickdraw equipped with STRING type webbing protection. The anchor-end carabiner must be mobile (no STRING). The rope-end carabiner must be fixed (with STRING). Warning:never install two STRINGs on one quickdraw. It would be too rigid: risk of poor positioning (e.g. cantilevered loading).

1

2

3

1

Rope path

1

1

2

2

3

3

1

1

2

2

3

3

1

1

2

32

3

1

2 1

3

2

3

The carabiner gate must always face away from the climbers direction of travel. The rope in the carabiner must pass through it from the cliff side to the outside. Incorrect positioning of the quickdraw or the rope could cause the rope to unclip, either due to rope movement or to the carabiner flipping on the bolt during a fall.

Clipping the rope

With small ANGES carabiners, it is more efficient to keep the fingers on the outside. Stabilize the quickdraw carabiner and put the rope through it.

With larger ANGEL (or SPIRIT) carabiners, you can place a finger into the carabiner to stabilize it. Then insert the rope.

10

www.petzl.com

MountaineeringCrevasse rescue:transferring a partners weight onto an anchor

O

Installation of the anchor

mini 50 cm

A dead-man anchor is used The principle is to use an object that provides sufficient resistance to the tension exerted on it. In snow, you can bury an ice axe, a backpack, a ski. If there is ice, you will need an ice screw. Complete the anchor by attaching a long sling. In snow, it is important to place the sling in a groove in the anticipated direction of pull so that the buried object is not pulled out.

11

www.petzl.com

Pascal Tournaire


n a glacier, the classic accident is of course a fall into a crevasse. If progression is on a taut rope, the appropriate reflex of the surface climbers would be to arrest the fall with their counterweight. Once the fall is arrested, the first priority is to create an anchor to support the weight of the victim. With a party of two, the surface climber is alone. She must install an anchor and transfer the weight of the victim onto it by herself. To succeed, she must carry out the following sequence, all the while staying in counterbalance and having all her gear (progress capture pulley, carabiner, sling) easily accessible on the harness. Training is essential!

MountaineeringCrevasse rescue:transferring a partners weight onto an anchorTransferring the weightOnce the anchor point is in place, you can begin transferring the weight.1 2

3

4Information is non-exhaustive. Refer to the other pages as well as to the user instructions and technical manuals. Technical training is essential.

MINI TRAXION

Installing the progress capture pulley First, install the progress capture pulley on the rope holding the victim. Be sure that the pictogram of the person on the black side plate is on the side of the victim.

Before closing the pulley for the transfer, remember to engage the toothed cam to allow jamming. Verify the jamming direction.

The transfer Connect the MINITRAXION to the anchor sling with a symmetrical locking carabiner (OK). Slide the progress capture pulley down the rope to put the sling under tension. Slowly and smoothly transfer the weight. The rescuer places partial tension on the anchor to check that it is solid. He can then transfer the entire load.

Once the load is on the anchor, the remainder of the rescue can be organized:ascending the rope, hauling Warning:to prevent further accidents, the rescuer(s) should always remain on back-up belay.

- MINI TRAXION - OK x 2 - TIBLOC - STANNEAU - OSCILLANTE CREVASSE RESCUE KIT LASER SONIC

12

www.petzl.com


Aid climbingHauling a bag:preparation and technique

I

n aid climbing, it is essential to organize your equipment. It is impossible to empty your haul bag at each station to find an item forgotten at the bottom. Each item must have its place. In the same way, organization for hauling should also be efficient. First of all, having several bags of 30 to 40kg, rather than one 80kg bag, is a good idea. It is not uncommon to see an inexperienced party leave with a huge bag and spend two or three hours hauling it up one pitch! Choosing the hauling technique best suited to, for example, a traverse or a big overhang is also key. Here are some tips for efficiency and for avoiding any serious errors. Before you head off for a vertical adventure of two or three days, training is strongly recommended.

Preparing for hauling

Tony Lamiche

Attachment of haul bag The haul bag should always remain attached. The attachment knot should be protected with a cut plastic bottle to keep it from snagging in a crack or under an overhang. Between the knot and the bag, you can use a SWIVEL to avoid rope twists during manipulations. Only one of the bags two haul straps is attached to the carabiner or maillon under the SWIVEL. This way it is easy to open the bag without dropping it. When hauling, nothing should stick out from the bag, and the sling should be folded behind the flaps. Have a lanyard ready for attaching the bag to the station (a knotted rope end is perfect).

Installing a progress capture pulley Install the PROTRAXION progress capture pulley on the station, always with two connectors: one locking, for connecting the pulley to the station another for locking the swinging side plate Always check the positioning of the pulley with respect to the direction of rope pull. The direction of pull should be in line with the pulley. With lateral pull, the rope can be damaged, or get caught between the swinging side plate and the sheave. Remember:Because of the great stresses created during hauling, the hauling station should be triangulated and bomb-proof.

13

www.petzl.com


Aid climbingHauling a bag:preparation and techniqueHauling technique

Munter hitch

Balancier technique The easiest and most efficient hauling technique is the balancier on the ASCENSION handled rope clamp. It uses the weight of the body as a counterweight to raise the bag. This technique is efficient, although it can only be used with a light bag (30 to 40kg). For heavier bags, you can either use two climbers for counterweight or employ other hauling techniques. Warning:during these manipulations, the counterweight climber must always remain attached to the station with a rope.

Traverses and overhangs When the pitch is a traverse or a big overhang, the hauling technique needs to be adapted. The goal is to place the bag plumb with the direction of the hauling station to limit pendulums and stress on the anchor. First, attach the bag several meters from the lower end of the rope. The lower climber lowers the bag on a Munter hitch while the upper climber hauls gently. Once the bag is vertically aligned with the upper anchor, normal hauling continues.

PRO TRAXION

ASCENSION

WALLSTEP

SWIVEL S

14

www.petzl.com



Via ferrataProgression on via ferrata:belaying a child

A

via ferrata outing with the children can be both fun and educational. Bars, ramps, steps, suspension bridges, and rope-bridges create a playground that is ideal for learning about upward progression.

With children, it is essential to use a rope along with energy absorbing lanyards

1 - On a via ferrata, as with all vertical activities, there is never a zero risk factor. With children, the parents / leaders vigilance should be heightened. Some tips for preparing the outing: Choose a via ferrata that you know, one that is manageable, with escape options, and suited to your technical level as well as your childs Explain the instructions for safe progression before leaving Be properly equipped:appropriate footwear, technical equipment (harnesses, energy absorbing lanyards, helmets, ropes) Plan for enough water and food And of course, check the weather forecast before leaving

Most via ferrata energy absorbers are not designed for belaying children. For example, the SCORPIO lanyard is designed for belaying a person weighing between 45 and 90kg.

2 - Regardless of the length of the energy absorber, a classic rope belay system should be set up to enhance the childs safety. The rope is used only to belay the child. To reduce weight, a 30m length of UIAA rope is sufficient. Use a figure eight knot to tie into the harness.

3 - Use an energy absorbing lanyard when passing intermediate anchors. To learn more about progression techniques using energy absorbing lanyards: www.petzl.com

15

www.petzl.com

Tony Lamiche


Via ferrataProgression on via ferrata:belaying a childBelaying while moving

4 - Over easy horizontal traverses, the leader and child use their progression lanyards to progress simultaneously with the rope taut.

5 - While progressing, the leader passes the rope through the pigtails or the quickdraws; the child then removes it.

6 - A relatively close tie-in allows better supervision of the child. Lanyards will keep the child connected to the cable in case of a fall.

Belaying from a fixed anchor

7 - During vertical sections, the leader progresses with energy absorbing lanyards and passes the rope through the pigtails or the quickdraws, if necessary, to keep it in line. The child waits on belay with his lanyards and helps manage the rope. Caution:these pitches should not be too long.

8 - Above the pitch, the leader should remain visible and set up a station on the energy absorbers in order to belay the childs ascent. The rope is used to avoid a fall. The child removes the rope from the pigtails while progressing.

9 - A REVERSO3 or a munter hitch on a locking carabiner is used for belaying the ascent of the second.

PICCHU

SIMBA

SCORPIO

Rope (UIAA)

REVERSO 3

AmD

SPIRIT EXPRESS

16

www.petzl.com



Trail runningNight trails:tips for choosing a headlamp

H

aving a good understanding of lighting performance is essential for choosing a headlamp for night running. This performance is linked to notions like luminous flux, distance, battery life, and lighting regulation. Lets explore these parameters.

Lafouche

Luminous flux

For a headlamp, the luminous flux, measured in lumens (lm), represents the total quantity of visible light emitted. It is the equivalent of the horsepower of a car or motor. For example, a Petzl ULTRA reaches a luminous power of 350lm in maximum mode. The quantity of light needed varies among individuals, the nature of the terrain and the race and expected speed. Nevertheless, a good luminous flux allows you to see better, to save your strength and to go faster. For technical trails, a power greater than 150lm is recommended.

Arnaud Childeric

Lighting distance

Light quantity, received by a surface, diminishes as its distance from the light source increases. This is the lighting parameter that is measured in Lux. For many headlamp manufacturers, lighting distance indicates the distance to which the quantity of light received on a surface is equivalent to the quantity of light of a full moon (0.25lux). For example, an ULTRA in maximum mode has a lighting distance of 120m. At 120m the light it emits is the same as that of a full moon, or 0.25lux.

Thomas Marchand

Shape of the beam

For the same light output, depending on the headlamp model, the flux can be uniformly distributed over a very wide area, or be concentrated in a very narrow spot to have a much greater lighting distance. This type of lighting is recommended for technical trails, where you have to see far and quickly. For a classic trail, mixed lighting, which combines a wide beam and a focused beam, is practical.

Arnaud Childeric

17

www.petzl.com


Trail runningNight trails:tips for choosing a headlampDuration/burn timeA headlamps battery life should be considered in relation to the length of the race. It is the length of time during which lighting is greater than 0,25 lux 2m the light of a full moon (0.25lux). It is expressed in minutes. For example, an ULTRA in high mode has a battery life of 3h15, meaning that t (h) t 0 t 0h30 t 10h after 3h15, the lightingt 30h an ULTRA at twometers is that of a full moon, or 0.25lux. Depending on the model of the headlamp, change in of light output over time is controlled in two ways:regulated lighting and non-regulated lighting.

2m t0

0,25 lux

t (h)

2m t 0 t 0h30 t 10h t 30h

0,25 lux

t (h)

Regulated lighting Lighting level is constant. It remains at a high a level for a certain period of time, then decreases markedly after that time. Regulated lighting headlamps are designed for trails, where full power is important.

Unregulated lighting As soon as the headlamp is on, light output begins to decrease gradually. This progressive decrease allows longer battery life. This mode is useful when light output is not the most important consideration.2m t0 0,25 lux

t (h)

Wearing the headlamp

Headlamps are worn either all on the head or in a BELT version (lighting on the head, remote energy source). The BELT versions reduce the weight on the head. The remote battery pack allows the energy source to be protected from the cold under clothes. The energy available is thus better conserved.

CORE rechargeable battery and OS by Petzl software

The new CORE rechargeable battery is designed for the TIKKA2- ZIPKA2 headlamp line. This battery is easy to insert into the headlamp in a few seconds instead of the usual three batteries. It offers an advantage over standard batteries for frequent or intensive headlamp use. It is more economical to use - it pays for itself after four sets of alkaline batteries. Lithium Ion Polymer technology guarantees a battery life equivalent to more than 900batteries. The CORE battery contributes in a truly efficient way to limiting waste that is harmful to the environment. It is very easy to insert and can be charged via any standard USB charger:a cell phone charger, a multimedia device, cigar lighter charger, or even a solar panel, a portable energy source, a computer,etc. OS by Petzl software is intuitive and user-friendly, and allows you to configure the battery to personalize the performance of TIKKA2 - ZIPKA2 headlamps to respond to your lighting needs. Once the CORE is connected to a computer loaded with OS by Petzl, you can choose between regulated or non-regulated lighting. Lighting duration and intensity can also be adjusted.

ULTRA BELT ACCU 4

MYO RXP

TIKKA XP CORE

More information at: www.petzl.com

18

www.petzl.com




PRODUCTS

19

www.petzl.com

Bernardo Gimnez

Montsant, Spain

HarnessesHIRUNDOS C36

Ultralight harness for high-end climbing

Frame Construction technology is pushed to the maximum. An ultralight and super compact harness for maximum climbing performance. Fourequipment loops wont limit this harness to short sport climbs.Size XS = weight:270 g, waist size:59 - 71 cm, leg loops:43 - 48 cm Size S = weight:280 g, waist size:66 - 78 cm, leg loops:47 - 52 cm Size M = weight:300 g, waist size:71 - 83 cm, leg loops:52 - 57 cm Size L = weight:315 g, waist size:80 - 94 cm, leg loops:57 - 62 cm

SAMA C21

Mens climbing harness with elastic leg loops

The SAMA is the perfect harness for cragging and long routes. The elasticized leg loops stay snug to ensure comfort in a fall and when hanging out at the belay, without constricting movement while climbing. Very breathable for those long, hot days.Size S = weight:370 g, waist size:70 - 81 cm, leg loops:47 - 52 cm Size M = weight:390 g, waist size:76 - 90 cm, leg loops:52 - 59 cm Size L = weight:420 g, waist size:85 - 100 cm, leg loops:57 - 64 cm Size XL = weight:445 g, waist size:89 - 104 cm, leg loops:62 - 67 cm

SELENA C55

Womens climbing harness with elastic leg loops

As the womens version of the SAMA, the SELENA offers all the performance of a Petzl harness, with fit and comfort characteristics tailored for a womans physique.Size XS = weight:320 g, waist size:58 - 69 cm, leg loops:43 - 48 cm Size S = weight:360 g, waist size:60 - 71 cm, leg loops:47 - 52 cm Size M = weight:385 g, waist size:67 - 81 cm, leg loops:52 - 59 cm Size L = weight:405 g, waist size:74 - 89 cm, leg loops:57 - 64 cm

ADJAMA C22

Mens climbing and mountaineering harness with adjustable leg loopsSize S = weight:420 g, waist size:70 - 81 cm, leg loops:47 - 57 cm Size M = weight:435 g, waist size:76 - 90 cm, leg loops:52 - 62 cm Size L = weight:460 g, waist size:85 - 100 cm, leg loops:57 - 67 cm

Easy-to-adjust leg loops mean this harness is great for ice climbing and mountaineering. Low bulk and flexible rear equipment loops prevent the waistbelt from interfering while wearing a pack.

LUNA C35

Womens climbing and mountaineering harness with adjustable leg loopsSize S = weight:410 g, waist size:60 - 71 cm, leg loops:47 - 57 cm Size M = weight:425 g, waist size:67 - 81 cm, leg loops:52 - 62 cm Size L = weight:450 g, waist size:74 - 89 cm, leg loops:57 - 67 cm

The womens version of the ADJAMA, with fit and comfort characteristics specifically designed for a womans physique.

20

www.petzl.com

HarnessesCALIDRIS C57

Comfortable and ventilated adjustable harness for extended periods of hanging

The wide waistbelt and leg loops of the CALIDRIS provide all the comfort, support and ventilation needed for long aid routes and other activities requiring extended periods of hanging (cleaning and equipping routes,etc.). Lightweight and comfortable, with large gear-carrying capacity, it is perfect for big wall climbing. The CALIDRIS is sized to fit larger users for all types of climbing.Size 1 = weight:600 g, waist size:65 - 95 cm, leg loops:48 - 60 cm Size 2 = weight:685 g, waist size:83 - 110 cm, leg loops:56 - 70 cm

CORAX C51

Comfortable and adjustable harness

CORAX is the multi-purpose harness par excellence. It comes in two sizes, so adapts to all user shapes. Its comfort and ease of use make it suitable for a wide range of users for climbing, mountaineering or via ferrata. The comfort and ventilation have been improved. The two DoubleBack buckles center the equipment loops in optimal position.Size 1 = weight:490 g, waist size:60 - 90 cm, leg loops:48 - 58 cm Size 2 = weight:530 g, waist size:75 - 105 cm, leg loops:56 - 68 cm

KIT CORAX K30E

Climbing kit containing CORAX harness, UNIVERSO belay system, BANDI chalkbag with belt and bag of POWERCRUNCH chalkWhether purchasing your first harness or upgrading from an old one, this kit offers the perfect combination of gear. The CORAX harness offers maximum versatility and comfort with excellent performance. It comes with the UNIVERSO belay system to handle any diameter of rope. The kit comes with a BANDI chalkbag with belt and 25g of POWERCRUNCH chalk.Size 1 = weight:490 g, waist size:60 - 90 cm, leg loops:48 - 58 cm Size 2 = weight:530 g, waist size:75 - 105 cm, leg loops:56 - 68 cm

ASPIR C24

Adjustable harness with padded waistbelt and leg loops

The ASPIR is a comfortable harness that offers many of the advantages of our high-end harnesses: padded waistbelt and leg loops, a reinforced tie-in point and two equipment loops. Its low bulk and large range of adjustability also make it great for mountaineering and glacier travel. A great harness too for viaferrata and adventure parks. Size 0 is specifically designed for kids.Size 0 = weight:420 g, waist size:53 - 72 cm, leg loops:40 - 58 cm Size 1 = weight:450 g, waist size:68 - 94 cm, leg loops:48 - 62 cm Size 2 = weight:485 g, waist size:86 - 110 cm, leg loops:57 - 70 cm

21

www.petzl.com

22

Harnesses

www.petzl.com

Chris Sharma on Lo Carrasclet (8a), Montsant, Spain

Bernardo Gimenez

HarnessesPANDION C29Basic adjustable harness with gear loop

This harness is great for climbing, glacier travel, and adventure racing. Also great for beginning climbers.Weight:400 g, waist size:60 - 101 cm, leg loops:< 67 cm

GYM C32

Basic adjustable harness for beginners and group programsWeight:390 g, waist size:60 - 101 cm, leg loops:< 67 cm

This is a simplified version of the PANDION without a equipment loop for climbing rental programs,etc.

OUISTITI C68

Full body harness for children under 30kg

Because small children do not have well-defined hips for a waistbelt to hold, the full body design is necessary for safety.Weight:350 g, leg loops:< 51 cm, chest length:45 - 60 cm

SIMBA C65

Full body adjustable harness for children less than 40kgWeight:390 g, leg loops:< 51 cm, chest length:35 - 60 cm

Because small children do not have well-defined hips for a waistbelt to hold, the full body design is necessary for safety.

8003 C05

Full body harness for adults

For those who prefer a full body harness to protect against falls for all types of vertical recreational activities. This harness is designed for alpine climbing.Size 1 = weight:580 g, waist size:60 - 95 cm, leg loops:42 - 62 cm Size 2 = weight:610 g, waist size:75 - 105 cm, leg loops:52 - 77 cm

VOLTIGE C60Weight:280g

Adjustable chest harness

This chest harness supports the climber while hanging and rappelling- for use only with a seat harness.

EASY C82

Non-adjustable chest harnessWeight:135g

Easy to use, compact, non-adjustable chest harness for support while hanging and rappelling- for use only with a seat harness.

23

www.petzl.com

24Going down in the Puits de Beffroi, Soum Couy 3 hole, Pierre Saint martin Pyrnes Atlantique, France

Harnesses

www.petzl.com

Phil Bence

HarnessesFRACTIO C16

Caving harness with double waistbelt

The FRACTIO is a light, durable caving harness made extremely comfortable with its completely adjustable double waistbelt. Its compact size and its buckles positioned between the legs limit the risk of snagging during narrow passages.Size 1 = weight:485 g, waist size:60 - 95 cm, leg loops:42 - 62 cm Size 2 = weight:530 g, waist size:90 - 105 cm, leg loops:52 - 77 cm

SUPERAVANTI C12

Basic lightweight caving harness

The SUPERAVANTI is a lightweight caving harness designed for a wide range of users. It is entirely adjustable, thanks to its buckles, and its construction is particularly simple and sturdy. The attachment points are now positioned even lower in order to make rope ascents easier and more efficient. Its compact size and its buckles being positioned between the legs limit the risk of snagging during narrow passages.Size 1 = weight:405 g, waist size:60 - 95 cm, leg loops:42 - 62 cm Size 2 = weight:440 g, waist size:90 - 105 cm, leg loops:52 - 77 cm

TORSE C262

Shoulder straps for positioning a CROLLWeight:90g

The TORSE shoulder strap allows the CROLL ventral rope clamp to remain correctly positioned in order to optimize efficiency and comfort during rope ascents.

CANYON C86

Canyoning harness with padded waistbelt and protective seatWeight:700 g, waist size:67 - 120 cm, leg loops:52 - 77 cm

Whitewater cascades, rappelling, swimming, jumping this is the domain of the CANYON harness. Rugged, non-absorbent materials ensure lightweight longevity for all your aquatic adventures.

PROTECTION CANYON C86400Weight:170g

Protective seat for CANYON harness

CARITOOL P42

Harness tool holder

A great accessory for mountaineering, ice climbing and long routes, it allows quick access and organization of ice screws, pitons, nuts,etc. Will also allow for quick storage/holstering of ice tools. Compatible with the slots on most Petzl harnesses and also attaches to webbing waist belts of other harnesses.Weight:25g

25

www.petzl.com

26

Helmets

www.petzl.com

Arnaud Petit on the crux 5th pitch (8b) of the Voie Petit, Grand Capucin, France

Bertrand Delapierre

Helmets

METEORIII+ A71

Ultra-light, versatile helmet

Weighing only 235grams, the METEORIII+ sets the standard in terms of lightness and comfort. It is also one of our most ventilated models. Its innovative adjustment system allows each climber to adjust his/her helmet to head shape. Originally designed for climbing and mountaineering, the METEORIII+ also meets the European standards for cycling and whitewater sports.Headband:53 - 61cm, weight:235 g

ALTIOS A45

Ultra comfortable multi-purpose helmet

The hybrid suspension system, composed of a mesh panel and expanded polystyrene liner, makes this helmet extremely lightweight and comfortable to wear. Thanks to this innovative design, the helmet 'floats' above the head for a near-weightless feeling. The space between the head and the liner allows for effective ventilation with the Climate Control System. Durable ABS shell. This helmet is very ergonomic, adapting to any head shape, and offers twooptions for attaching a headlamp: a removable ADAPT system mount, or clips.Size1 = headband:48 - 56cm, weight:305 g Size2 = headband:53 - 61cm, weight:335 g

ELIOS A42

Lightweight and durable helmet

This low profile helmet is easy to adjust, comfortable and well-ventilated. The adjustment wheel is quick and easy to use, even when wearing the helmet. The combination of shell and foam technology makes it perfect for rock climbing, ice climbing, mountaineering, canyoning, caving and via ferrata.Size1 = headband:48 - 56cm, weight:280 g Size2 = headband:53 - 61cm, weight:305 g

27

www.petzl.com

HelmetsELIA A48

Women's climbing and mountaineering helmet

The ELIA helmet was designed and developed to respond specifically to the needs of women. The innovative OMEGA headband system (Petzl patent) allows the helmet to be put on and removed easily and offers maximum comfort. In addition to this exclusive feature, the helmet has a new headband adjustment mechanism. It allows the helmet to be precisely adjusted for different head shapes.Headband:52 - 58cm, weight:285 g

PICCHU A49

Children's climbing and cycling helmet

The PICCHU helmet is designed for children who want to rock climb or cycle. It is very light and comfortable and constructed for durability. Three pages of stickers, with one reflective page, are included so that the helmet can be personalized and made more visible.Headband:48 - 54cm, weight:310 g

ECRIN ROC A01

Ultra-durable helmet with textile headband

This is the classic Petzl helmet, the standard for mountaineering, climbing and caving. Extremely durable, this helmet can withstand the harsh conditions and rough treatment that are often encountered in the high mountains or deep caves.Headband:53 - 63cm, weight:445 g

TRIOS E75 UW

Caving helmet with ultra-powerful lighting, fourregulated lighting modes and ACCU2ULTRA rechargeable battery

The TRIOS helmet is designed for cavers looking for a two-in-one solution. The TRIOS comes with the headlamp mounted on the helmet, plus an elastic headband for wearing it without the helmet. This helmet offers great versatility. It has an ABS shell and a polystyrene liner. Lighting is provided by an ULTRAWIDE headlamp. This headlamp provides ultra-powerful regulated lighting of 300lumens and a uniform beam for approximately 180. It has four lighting modes and a reserve mode for when the Lithium Ion battery is almost discharged.Size1 = headband:48 - 56cm, weight:635 g Size2 = headband:53 - 61cm, weight:660 g

28

www.petzl.com

Helmets

SPELIOS E75

Caving helmet with hybrid lighting: halogen/ 14LEDs with threeregulated lighting modes

The SPELIOS is made up of a versatile helmet combining a shell with an expanded foam liner and a waterproof hybrid headlamp. This product is suited for cavers and canyoneers looking for a complete, durable and comfortable solution. The hybrid light source delivers a powerful, focused beam (halogen bulb) or a wide flood beam (LEDs), depending on the situation. For greater versatility, the LED light source has threeregulated lighting modes to ensure a constant level of lighting until the batteries are completely discharged.Size1 = headband:48 - 56cm, weight:505 g Size2 = headband:53 - 61cm, weight:535 g

EXPLORER LED 14 E70 L14

Caving helmet with three light sources: acetylene, halogen and 14LEDs

The EXPLORERLED14 combines the ECRINROC, a very durable helmet with mesh headband, with a waterproof hybrid light source, the FIXODUOLED14, and acetylene lighting. Used with the ARIANE acetylene generator, this combination is sure to satisfy the most demanding caver. The hybrid light source provides a choice of either a focused long-range beam with its halogen bulb, or flood beam for proximity lighting with its 14LEDs. The latter light source offers threelighting levels and regulated lighting. This system provides a constant light until it switches to reserve power mode when the batteries become almost depleted.Headband:53 - 63cm, weight:725 g

VIZION A441

Face shield for METEORIII, ALTIOS and ELIOS

This modular face shield is compatible with the METEORIII, ALTIOS and ELIOS helmets, providing face protection from shattered ice and spindrift. It can be rotated upward when not needed or stored on top of the helmet during transport.Weight:60g

BOUCHON A01870Weight:3g each

Plugs for the ventilation holes of the ECRINROC

These removable plugs seal the ventilation holes in the ECRINROC helmet, keeping out water, snow, wind and cold.

29

www.petzl.com

Belay devices, descendersBelay devices-descenders

VERSO D19

Petzls lightest belay/rappel device with descent control technology adapted to different rope types

The VERSO is a simplified version of the REVERSO 3. It offers a lighter, more compact option to climbers looking to reduce the weight and size of their gear. The asymmetrical V-shaped grooved friction channels adapt the friction for better control using our ARC (Adaptive Rope Control) technology.Rope compatibility = single rope: 8.9 mm, half rope: 8 mm, twin rope: 7.5 mm. Weight:57 g

UNIVERSO D18

Belay system combining a VERSO and an ATTACHE3D held in optimal position by a sliding connection piece

The UNIVERSO is a complete and lightweight belay system that is particularly comfortable and efficient to use on all rope diameters. This system consists of a VERSO belay device, an ATTACHE3D carabiner and an exclusive sliding connection piece.Rope compatibility = single rope: 8.9 mm, half rope: 8 mm, twin rope: 7.5 mm. Weight:120 g

REVERSO 3 D17

Ultra-light multipurpose belay/rappel device which regulates the amount of braking friction on the rope according to its diameter and condition; reverso modeThis multi-purpose belay/rappel device is lightweight and easy to use. The asymmetrical V-shaped grooved friction channels adapt the friction for better control using our ARC (Adaptive Rope Control) technology. Reverso mode for belaying one or two seconds with assisted braking.Rope compatibility = single rope: 8.9 mm, half rope: 8 mm, twin rope: 7.5 mm. Weight:77 g

GRIGRI2 D14 2

Belay device with assisted braking for 8.9 to 11mm rope

The GRIGRI2 belay device with assisted braking is designed to facilitate belay maneuvers. The GRIGRI2 works equally well for lead climbing and top roping. It may be used on all single dynamic 8.9 to 11mm ropes on the market (optimized for 9.4mm to 10.3mm ropes). Both compact and ultra-light, the GRIGRI2 will accompany you on climbs around the world for many years. The GRIGRI2 has a new design that allows excellent control during the descent.For use with single ropes between 8.9 and 11mm. Weight:185 g

30

www.petzl.com

Belay devices, descenders

Francois Damilano on Poker das, Mont-Blanc du Tacul, France

Descenders

HUIT D02

Figure 8 descender

For descending on single or double ropes.Rope compatibility = single rope:9 - 13 mm, half rope:8 - 11mm. Weight:100 g

HUIT ANTIBRULURE D01

Figure 8 descender with anti-burn grip

Anodized version on the HUIT with anti-burn tab for holding the device when it is hot from a long or rapid descent.Rope compatibility = single rope:9 - 13 mm, half rope:8 - 11mm. Weight:110 g

PIRANA D05

Descender for canyoning

The PIRANA descender offers multiple braking options and can be installed on the rope without removing it from the harness. Designed for use with canyoning descent techniques.Rope compatibility = single rope:9 - 13 mm, half rope:8 - 11mm. Weight:90 g

31

www.petzl.com

Monica Dalmasso

Belay devices, descendersSTOP D09

Belay device with assisted braking for single ropeRope compatibility on single ropes:9 - 12 mm. Weight:326 g

One of the most popular devices for cave descents worldwide. Offers exceptional control and versatility, while the assisted braking function facilitates on-rope maneuvers.

SIMPLE D04

Single rope descender

The SIMPLE descender is lightweight, compact, and does not twist the rope during descent.Rope compatibility on single ropes:9 - 12 mm. Weight:240 g

RACK D11

Variable friction descender with braking bars

This rack updates the classic brake bar descender. The design and configuration of the bars makes it easy to set up and insert the rope. Compact and lightweight, the device allows the user to adjust the amount of friction during the descent to adapt to changing conditions (rope weight, terrain,etc.).Rope compatibility = single rope:9 - 13 mm, half rope:8 - 11mm. Weight:470 g

Via ferrata lanyards

SCORPIO EASHOOK L60 H

Retractable Y-shaped lanyard with tearing energy absorber and EASHOOK connectors

This viaferrata lanyard has all the features needed for spending an excellent day out on the cliffs. The retractable lanyard arms keep out of the way. Stored in a zippered pouch, the tearing energy absorber is protected and is easy to inspect. The third arm is great when traversing or when you need to rest by clipping directly to a rung.Weight:540g

SCORPIO VERTIGO WL L60 WL

Retractable Y-shaped lanyard with tearing energy absorber and VERTIGOWL carabiners

This viaferrata lanyard has all the features needed for spending an excellent day out on the cliffs. The retractable lanyard arms keep out of the way. Stored in a zippered pouch, the tearing energy absorber is protected and is easy to inspect. The third arm is great when traversing or when you need to rest by clipping directly to a rung.Weight:504g

32

www.petzl.com

Belay devices, descendersSCORPIO L60 2

Retractable Y-shaped lanyard with tearing energy absorber

This viaferrata lanyard has all the features needed for spending an excellent day out on the cliffs. The retractable lanyard arms keep out of the way. Stored in a zippered pouch, the tearing energy absorber is protected and is easy to inspect. The third arm is great when traversing or when you need to rest by clipping directly to a rung. Version without carabiners.Weight:310g

ZYPERVERTIGO L56 WL

Y-shaped lanyard with friction energy absorber

A more basic alternative to the SCORPIO, the ZYPER absorbs the energy of a fall though the slippage of the dynamic rope through the metallic friction device. Comes equipped with a plastic clip to help keep the excess rope out of the way. Attaches easily to the harness with a simple larks head hitch. Available with carabiners.Weight:588g

ZYPER-Y L56

Y-shaped lanyard with friction energy absorber

A more basic alternative to the SCORPIO, the ZYPER absorbs the energy of a fall though the slippage of the dynamic rope through the metallic friction device. Comes equipped with a plastic clip to help keep the excess rope out of the way. Attaches easily to the harness with a simple larks head hitch. Available without carabiners.Weight:395g

KIT VIA FERRATA K29V

Via ferrata kit containing ELIOS helmet, PANDION harness and SCORPIOVERTIGOWL lanyard with energy absorber

Everything you need for your via ferrata adventures: - an ELIOS helmet (comes in two sizes: size 1:48-56 cm, size 2:53-61 cm) - a PANDION basic adjustable harness with equipment loop (one size:waistbelt 60-101cm and leg loops < 67cm) - a SCORPIOVERTIGOWL retractable Y-shaped lanyard with tearing energy absorber.

33

www.petzl.com

CarabinersNon-locking carabiners

ANGE S M57 G, M57 0

Ultra-light, compact carabiner with MonoFilKeylock system

The newgeneration ANGES carabiner represents the middle ground between the traditional gate carabiner and the classic wire gate carabiner. It combines the fluidity of the spring gate with the lightness of the wire gate system. Petzl's MonoFilKeylock technology and the H-profile make the ANGES carabiner weigh an ultra-light 28grams and provide an optimal weight/strength ratio. So it is particularly suitable for users looking to reduce their weight to a minimum. The shape of the nose is designed to optimize clipping and unclipping.Strength= major axis:20kN, open gate:9kN, minor axis:5kN Weight:28g

ANGE L M59 G, M59 B

Light carabiner with MonoFilKeylock system

The new generation ANGEL carabiner represents the middle ground between the traditional gate carabiner and the classic wire gate carabiner. It combines the fluidity of the spring gate with the lightness of the wire gate system. Petzl's MonoFilKeylock technology and the H-profile make the ANGEL carabiner weigh a light 34grams and provide an optimal weight-to-strength ratio. So it is particularly suited to users looking to reduce weight while keeping the functionality of a standard size carabiner. The shape of the nose is designed to optimize clipping and unclipping.Strength= major axis:22kN, open gate:10kN, minor axis:7kN Weight:34g

ANGE FINESSE M57D 10, M57D 17, M58D 17, M59D 17Quickdraw with ultra-light ANGE carabinersQuickdraws with ultra-light ANGE carabiners are available in four versions: - ANGE FINESSE 10cm (ANGES + ANGES): designed to be the most compact and lightweight quickdraw, thanks to its two ANGE (size S, 63g) carabiners - ANGE FINESSE 17cm (ANGE S + ANGE S): offers greater versatility while keeping weight to a minimum (66 g) - ANGE FINESSE 17cm (ANGE S + ANGE L): faster, easier clipping with the ANGEL on the rope end, and optimal weight with the ANGES on the anchor end (72g) - ANGE FINESSE 17cm (ANGE L + ANGE L): designed for easier clipping with large or gloved hands, thanks to the very wide opening (26mm) of the two carabiners, while keeping the quickdraw's weight to a minimum (78g).

Pack 5 ANGEFINESSE M57P 10, M58P 17

Packs of fivequickdraws with ultra-light ANGE carabiners

ANGEFINESSE packs contain fiveANGEFINESSE Dyneema quickdraws equipped with MonoFilKeylock ANGES or ANGEL carabiners.

FINESSE C39 10, C39 17

Sewn sling with STRINGS for quickdrawC39 10: weight: 7 g C39 17: weight: 10 g

FINESSE sewn slings are ultra-light. They include the STRINGS webbing protection on the rope end, to protect the webbing from abrasion while keeping the carabiner in position. They come in twolengths:10cm and 17cm.

34

www.petzl.com

Carabiners

Philippe Batoux on Stracciatella Nant de lEnfer, France

SPIRIT M15A

Straight gate carabiner

Since its release in 1991 the SPIRIT has been considered the best carabiner on the market; no other carabiner has come close to topping its smooth action, perfect ergonomics and durability. The SPIRIT is made for clipping over and over again.Strength= major axis:23kN, open gate:9.5kN, minor axis:10kN Weight:49g

SPIRIT M10A

Bent gate carabiner

A bent gate SPIRIT. The perfectly curved gate and frame shape make clipping the rope a breeze.Strength= major axis:23kN, open gate:9.5kN, minor axis:10kN Weight:49g

35

www.petzl.com

Pascal Tournaire

CarabinersEXPRESS C40Sewn sling with STRING for use as quickdrawThe EXPRESS is the perfect quickdraw for sport climbing. Its width makes it easy to grab on to. The STRING holds the carabiner in place for the rope end of the draw for easier clipping, and helps protect the end from abrasion. Three lengths to meet all your needs.C40 11: length:11 cm, weight:10 g C40 17: length:17 cm, weight:15 g C40 25: length:25 cm, weight:20 g

SPIRIT EXPRESS M3011A - M3017AM30 11A = length:11 cm, weight:104 g M30 11A = length:17 cm, weight:109 g

EXPRESS quickdraw with SPIRIT straight and bent gate carabiners

OWALL M41

Oval-shaped carabiner

The oval OWALL is a general purpose carabiner for trad and aid climbing. Ideal for racking wired nuts and other protection: gear doesnt snag on the Keylock.Strength= major axis:24kN, open gate:7kN, minor axis:10kN Weight:68g

Locking carabiners

AmD M34

D-shaped locking carabiner for attaching devices to the harness

The shape and size of this carabiner makes it great for most uses, from connecting a belay device to your harness to using it as a connector at the end of a lanyard. The D-shape makes it one of the strongest locking carabiners Petzl makes.Strength = major axis:28kN, open gate:8kN, cross-loaded:7kN Available with locking system: - SCREW-LOCK, weight:78 g - BALL-LOCK, weight:78 g - TRIACT-LOCK, weight:74 g

WILLIAM M36

Pear-shaped locking carabiner with wide opening for belay stations and belaying with Munter hitch

A large carabiner can come in handy in many places. This ones shape and size make it useful for belaying and rappelling with the Munter hitch with single or double ropes, anchoring multiple ropes and slings and keeping the belay station organized.Strength= major axis:25kN, open gate:7kN, minor axis:7kN Available with locking system: - SCREW-LOCK, weight:90 g - BALL-LOCK, weight:94 g - TRIACT-LOCK, weight:88 g

36

www.petzl.com

37

Carabiners

www.petzl.com

Sean Villanueva-ODriscoll powering through the crux pitch of Devils Brew, Sortehul Fjord, North West Greenland

Ben Ditto

Carabiners

ATTACHE3D M38 SL

Ultralight compact pear-shaped locking carabiner

The original mini-HMS carabiner has been redesigned to be ultralight. The ATTACHE3D has been reduced to a mere 55g by removing all unnecessary material while maximizing the strength. The 3D shape keeps the original ATTACHE versatility while reducing weight. The rope bearing surfaces have been optimized to balance fluidity with a minimum of excess weight.Strength= major axis:22kN, open gate:6kN, minor axis:7kN Weight:55g

ATTACHE M35 SL

Compact pear-shaped locking carabiner

The size and shape of this carabiner make it popular for many uses: connecting a belay device to a harness, belaying with a Munter hitch and using it as a multi-purpose carabiner at belay stations.Strength= major axis:23kN, open gate:6kN, minor axis:7kN Weight:80g

LOCKER SL M55 SL

Compact and lightweight asymmetrical locking carabinerStrength= major axis:24kN, open gate:8kN, minor axis:9kN Weight:63g

This manual locking carabiner is compact and light. It is designed for climbing, mountaineering, canyoning,etc. The asymmetrical shape of the carabiner allows for a wide gate opening with excellent capacity and handling.

OK M33

Oval-shaped locking carabiner

Many pulleys need an oval-shaped carabiner to work properly. The OK carabiner is designed for just that. It is also very useful at belays.Strength = major axis:24kN, open gate:7kN, cross-loaded:10kN (M33 SL), 8kN (M33 TL) Available with locking system: - SCREW-LOCK, weight:75 g - TRIACT-LOCK, weight:77 g

38

www.petzl.com

CarabinersSpecial locking carabiners

FREINO M42

Locking carabiner with friction spur for descendersStrength= major axis:25kN, open gate:9kN, minor axis:10kN Weight:85g

For those times when you need a little extra friction while descending, the FREINO is the way to go.

VERTIGO WL M40 WL

Locking carabiner for via ferrata

The VERTIGOWL is designed to be used at the end of a viaferrata lanyard. Its ergonomic design and easy-to-use locking system facilitate passing intermediate anchors. The wide opening can fit over most bars and cables.Strength= major axis:25kN, open gate:8kN, minor axis:10kN Weight:97g

OMNI M37

Semi-circle carabiner for fastening a harness

The half-moon OMNI is used to close harnesses that have twoattachment points that must be joined with a connector. It has a breaking strength of at least 15kN when loaded in any direction.Strength= major axis:20kN, open gate:7kN, minor axis:15kN Available with locking system: - SCREW-LOCK, weight:86 g - TRIACT-LOCK, weight:92 g

Carabiner accessories

STRING M90000 L, M90000 XL

Sewn webbing protection for keeping carabiner in position

The STRING serves two functions: it holds the rope end carabiner in place on the rope end of a quickdraw or sling and it protects a relatively high wear area of the sling. Available in twosizes for webbing between 15 and 30mm wide.

STRINGS M91000

Protects webbing (10mm) and keeps carabiner in place

The STRINGS has two functions: it holds the rope end carabiner in place and helps protect the webbing from abrasion. The STRINGS is suitable for 10mm quickdraws.

NITRO 3 67800

Energy absorber for use as quickdraw

For dubious protection when ice, mixed and traditional climbing.

39

www.petzl.com

40

Ice axes

www.petzl.com

Franois Damilano in the Mont Blanc du Tacul Triangle, France

Monica Dalmasso

Ice axesIce climbing

ERGO U22

High-end dry tooling and ice climbing axe

The ERGO is the ultimate tool for the most difficult dry tooling pitches and the most unlikely ice columns. The ultra-curved shaft offers exceptional clearance under the head and allows a wider repertoire of movement. The adjustable ergonomic handle allows multiple grip positions and limits the risk of pick shift when switching hands. The strong curve of the handle creates an ideal angle for prolonged suspensions and significantly increases power when pulling.DRY pick (type T), shaft typeT, weight:645 g

NOMIC U21 2

Dry-tooling and ice climbing tool

The NOMIC allows the entire rock climbing repertoire to be transferred to ice. Thanks to its adjustable ergonomic handle, it offers multiple grip modes and limits the risk of snagging when switching hands. The ICE pick allows easy penetration in any type of ice, and pulls out easily. The modular head has two removable pick weights to balance the axe and propel it into the ice with an exceptional swing. The NOMIC can also be equipped with a hammer when placing pitons.ICE pick (type T), typeT shaft, weight:605 g

QUARK U19 M2, U19 P2

Ice axe for technical mountaineering and ice climbing

The QUARK is a versatile ice axe, designed primarily for technical mountaineering and for ice climbing. Because of the head's modular construction, it adapts to any situation. The QUARK is easy to use: its balance and its ICE pick allow solid placements on any type of ice. Hooking is more efficient, thanks to the clearance under the head and to the shape of the pick. The GRIPREST and the TRIGREST hand rest ensure a comfortable, powerful grip adapted to leashless climbing.ICE pick (type T), typeT shaft, weight:550 g

41

www.petzl.com

Ice axesTechnical mountaineering

AZTAREX U11 P, U11 M

Lightweight multi-purpose ice tool

The AZTAREX excels in situations where every gram counts, but where there is no room for compromise. Perfect for technical, fast-and-light mountaineering. The hand rest provides extra support and allows the tool to be used leashless. When not needed, it can be removed and stored in the shaft so as not to interfere when plunging the tool in snow. The included BLUEICE pick is designed for hard ice and hooking. Available in adze and hammer versions.TypeT shaft, length:50cm, weight:500 g U11 P:AZTAREX adze version, U11 M:AZTAREX hammer version

SUMTEC U15

Lightweight, technical classic mountaineering ice axe

The logical evolution of the classic mountaineering ice axe, the SUMTEC combines the qualities of a technical mountaineering ice axe -thanks to its curved shaft- and a classic mountaineering ice axe. Light and versatile, this ice axe has an adjustable hand rest and an interchangeable pick.Shaft:typeT U15 52 = length:52cm, weight:485 g, U15 59 = length:59cm, weight:505 g

Classic mountaineering

SUMMIT U13

Classic modern mountaineering ice axe

The SUMMIT is designed for the modern practice of classic mountaineering. A result of the expertise acquired over many years, this product applies a new technical approach to this category of ice axes. The curved shaft provides the necessary clearance on steep or icy terrain. The light, forged steel head attached to the shaft ensures minimum weight and maximum efficiency.TypeB shaft U13 52 = length:52cm, weight:495 g, U13 59 = length:59cm, weight:535 g, U13 66 = length:66cm, weight:570 g

Glacier travel

SNOWALKER U01

Glacier touring ice axe

The SNOWALKER is the lightweight PetzlCharlet ice axe designed for glacier travel and easy snow slopes. The steel pick performs even in hard snow and ice. The wide adze chops steps efficiently and provides a comfortable weightbearing surface. The anodized shaft is made of high quality, durable 7075aluminum. RANDO leash included. Pick equipped with hole for clipping a carabiner or attaching a sling.TypeB shaft U01 60 = length:60cm, weight:415 g, U01 68 = length:68cm, weight:438 g, U01 75 = length:75cm, weight:458 g

SNOWRACER U02 50A

Featherweight axe with steel head for ski mountaineering and lightweight expeditions

The 50cm ultra-lightweight (340g) SNOWRACER is the perfect choice for ski mountaineering, snowboarding steep chutes and fast and light climbing. Features the same pick and adze as the SNOWALKER for high performance use in snow and ice. The aluminum shaft with beveled tip is plugged to prevent snow build-up in the shaft.TypeB shaft Length:50cm, weight:340 g

42

www.petzl.com

Ice axesSNOWSCOPIC U03 ATelescoping trekking pole/ ice axe for approaches and easy snow climbs

Combining a telescoping trekking pole and a fully-functioning ice axe, the SNOWSCOPIC is the only piece of equipment you will need for trekking, approaches and easy snow climbs. Extend the bottom section for use as a handy trekking pole; shorten it when the going gets steeper. Steel pick; adze designed for comfortable grip. Equipped with a carbide tip.TypeB shaft Length:65 - 105cm, weight:450 g

Ice axe accessories

DRY U19 DRY

Pick for dry tooling for QUARK (U19M2), NOMIC (U21 and U212) and ERGO (U22)

The DRY pick (4mm thick) is specifically designed for dry tooling and extreme ice climbing. Tapered at the tip (3mm), it penetrates the coldest ice easily. It has teeth on the lower part for hooking and on the upper part for reverse positions.Weight:129g

ICE U19 ICE

Pick for ice or mixed climbing for QUARK (U19M2), NOMIC (U21 and U212) and ERGO (U22)Weight:129g

The ICE is an ultra-versatile pick designed for ice climbing. Tapered at the tip (3mm), it penetrates the coldest ice easily. Its shape ensures stable hooking and easy unhooking on ice and rock.

ALPIX U15AALWeight:115g

Spare pick for SUMTEC

Its curved shape tapers at the tip for precise, solid purchase, and its re-curved shape makes it easy to remove.

BLUEICE U92000

Ice climbing pick for AZTAR and AZTAREXWeight:131g

This pick for the AZTAR or AZTAREX is designed for general purpose climbing on almost all terrains: snow, ice and rock.

QUATRO U93000

Dry tooling pick for AZTAR, AZTAREXWeight:136g

The 4mm QUATRO for the AZTAR or AZTAREX is an extra durable pick designed mainly for mixed climbing and mountaineering.

ADZE U19 PANWeight:69g

Adze for QUARK (U19M2), NOMIC (U21 and U212) and ERGO (U22)Wide adze for easily clearing ice or cutting steps or a platform.

43

www.petzl.com

Ice axesHAMMER U19 MARHammer for QUARK (U19M2), NOMIC (U21 and U212) and ERGO (U22)Weight:58g

The trapezoidal shape of this hammer's contact surface is specifically designed for ice climbing axes. Compatible with QUARK ice axes (starting in fall 2010), ERGO and all versions of the NOMIC.

TRIGREST U19 TRI

Adjustable hand rest for QUARK (U19M2), NOMIC (U21 and U212) and ERGO (U22)

The TRIGREST hand rest is adjustable in height, without tools, on the shaft or the handle. It has two support positions: a brace for hand switching in the high position, and a brace for the index in the low position. The latter increases grip strength for leashless climbing and improves planting precision. The TRIGREST may also be used in a fixed position, without the index support.Weight:19g

CLIPPER U80000

Quick attach leash for ice climbing

This comfortable leash with foam padding easily detaches from the axe for times when you need to have your hands free to place screws,etc. The innovative clip securely attaches the leash to to the tool, and is quick to detach and reattach. The strap is simple to adjust and stays on the wrist while unattached to the tool. Compatible with QUARK and NOMIC axes.Weight:62g

FREELOCK U81000

Fixed leash for ice climbingWeight:40g

The lightweight and comfortable FREELOCK is designed with technical alpine climbing in mind. The leash is tightened and loosened with a simple turn of the wrist.

RANDO U82000Weight:26g

Basic webbing leash

Attaches to the shaft of a basic ice axe.

REGLABLE 68504Adjustable leashWeight:38g

This leash is equipped with a buckle that allows it to be adjusted depending on the length of the tool and the climbers preference. Can be attached to all axes equipped with a hole in the shaft or the head.

GRIPTAPE U21700Grip tapeCustomize your tools with this rubber grip tape for improved grip and thermal insulation.Length:1 m, width:19 mm

PICK AND ADZE GUARD 68402 FLAT SPIKE GUARD 68395

Covers pick and adze to help prevent damage and/or injury during transport.

Covers the spike to help prevent damage and/or injury during transport.

ROUND SPIKE GUARD 68401

Covers the spike to help prevent damage and/or injury during transport.

44

www.petzl.com

CramponsIce climbing

DART T22

Mono-point crampon for ice and mixed climbing

The DART is the crampon for extreme mixed and ice climbing. The mono-point is designed to displace less ice and make for precise placements on micro-edges. The third row of points are angled towards the rear for hooking in steep terrain or around ice columns.11 points T22LLF 02 = LEVERLOCK FIL binding, weight (without ANTISNOW):2 x 412g=824 g T22SL 02 = SIDELOCK binding, weight (without ANTISNOW):2 x 408g=816 g

DARTWIN T21

Dual-point crampon for ice and mixed climbing

A version of the DART for those who prefer the added stability and holding power of twofront points.12 points T21LLF 02 = LEVERLOCK FIL binding, weight (without ANTISNOW):2 x 432g=864 g T21SL 02 = SIDELOCK binding, weight (without ANTISNOW):2 x 430g=860 g

M10 LLF T23 LLF 02

Modular crampon for ice and mixed climbing

For climbers who want the option to switch between mono or dual-point crampons, the M10 is for you. The replaceable forged front points can be configured asymmetrically or symmetrically for customized precision performance. The LEVERLOCKFIL binding system is easy to adjust and fits most boots with toe welts.14 points, LEVERLOCK FIL binding, weight (without ANTISNOW):2 x 525g=1050 g

Philippe Batoux on Papa ou Pa? Nant de lEnfer, Savoie, France

45

www.petzl.com

Pascal Tournaire

CramponsTechnical mountaineering

SARKEN T10

Technical mountaineering crampons

The SARKEN have been modified for improved durability and are better than ever. This is the crampon for anybody headed out into variable, mixed terrain. The 4x4 of crampons. The T-shaped front points are designed for excellent penetration in hard ice and stable front pointing on mixed terrain while providing solid purchase in snow and neve.12 points T10SL 22 = SIDELOCK binding, weight (with ANTISNOW):2 x 475g=950 g T10SPL 22 = SPIRLOCK binding, weight (with ANTISNOW):2 x 480g=960 g T10LL 22 = LEVERLOCK binding, weight (with ANTISNOW):2 x 505g=1010 g T10LLFL 22 = LEVERLOCK FIL binding, weight (with ANTISNOW):2 x 484g=968 g

Classic mountaineering

VASAK T05

Classic 12-point mountaineering crampon

VASAK crampons are designed for general purpose mountaineering. Twelvepoints ensure maximum traction in all conditions, whether you are climbing up steep slopes or ice couloirs. Available in all fourlightweight binding systems for solid boot interface.12 points T05SPL 02 = SPIRLOCK binding, weight (with ANTISNOW):2 x 465g=930 g T05SFL 02 = FLEXLOCK binding, weight (with ANTISNOW):2 x 470g=940 g T05SLL 02 = LEVERLOCK binding, weight (with ANTISNOW):2 x 490g=980 g T05SLLF 02 = LEVERLOCK FIL binding, weight (with ANTISNOW):2 x 460g=920 g

IRVIS T03

10-point crampon for ski touring and glacier travel

At 810g per pair (SIDELOCK), the 10-point IRVIS crampons are designed for glacier travel, ski mountaineering and snowy or icy approaches. They are lightweight and easy to use, making them a favorite in any conditions. Available with threedifferent binding systems, these crampons can fit most boots, even those without welts. Durable and easy to adjust.10 points T03LL 02 = LEVERLOCK binding, weight (with ANTISNOW):2 x 438g=876 g T03SL 02 = SIDELOCK binding, weight (with ANTISNOW):2 x 405g=810 g T03FL 02 = FLEXLOCK binding, weight (with ANTISNOW):2 x 410g=820 g

46

www.petzl.com

CramponsCrampon accessories

FAKIR V01

Carrying bag for crampons

Designed for carrying crampons, this zippered nylon compartment is also great for screws, extra picks,etc. Reinforced, semi-rigid bottom protects your pack from sharp tips. Featuring a mesh top panel which allows water to escape and your equipment to dry, and an internal strap which keeps the crampons in place.Weight:155g

ANTISNOW

Anti-bott system

These durable, dual density plates securely attach to all PetzlCharlet crampons to help prevent potentially dangerous underfoot snow buildup. The low profile design doesnt reduce the projection of the points. There is an ANTISNOW specifically designed for each PetzlCharlet crampon.DART/DARTWIN:T21 900, M10:T23 900, VASAK/SARKEN:T05960, IRVIS:T03960, ECRIN:68505, ARGENTERO:68517

BARRETTES L T20850Weight:120g

Long linking bar for sizes 41 to 50

Replacement linking bars for sizes 41 to 50; adjustable for half-sizes.

LONG CURVED LINKING BARS T10950Weight:120g

Long linking bar for asymmetric boots Replacement linking bar for boots with very asymmetric footprint. Adjustable to the half size.

TELEMARK TOE BAIL WIRE T03600Toe bail for telemark bootsReplaces the standard toe bail on PetzlCharlet crampons to make them compatible with telemark boots. Designed so the boot wont interfere with the front points.For SIDELOCK and LEVERLOCKFIL binding systems Weight:35g

Special purpose crampons

CRAB6 64160

6-point crampons These instep crampons are compatible with most sturdy shoes and boots. Lightweight and compact for use in snowfields. Great accessory for trekking and approaches.Weight:400g

SPIKY PLUS 79510, 79520, 79530Anti-slip soles Put these over any pair of shoes or boots for added traction on icy, slippery surfaces.

47

www.petzl.com

AscendersAscenders

ASCENSION B17SLN, B17SRG

Ergonomic handled ascender

Our handled ascenders have been refined to provide greater comfort, efficiency, ease of use. The ergonomically shaped handle is over molded with dual density grip for greater friction and better grip. The grip is wider at the bottom, providing better comfort for your pinkie fingers during use. The index finger indent has also been increased, offering greater efficiency when pulling on the ascender. The cam has been redesigned to minimize friction when sliding the ascender up the rope while the angled teeth provide secure grip in the worst conditions (wet, icy, or muddy ropes). The geometry of the single piece aluminum frame ensures optimal handle orientation when the device is loaded and will maintain solid, comfortable performance for ascents of any length.For use with ropes between 8 and 13mm in diameter:195g

CROLL B16AAA

Ventral ascender

When used with a chest strap and the ASCENSION or BASIC rope clamps, the CROLL makes for a simple and efficient system for ascending fixed lines. The angled attachment hole keeps the device properly aligned on the chest.For use with ropes between 8 and 13mm in diameter:130g

PANTIN B02ALA, B02ARA

Foot ascender- left and right foot versions

Using the PANTIN with a CROLL and ASCENSION keeps the body in a more upright position when ascending fixed ropes, making for faster and less tiring vertical progress. Available in both LEFT and RIGHT footed versions. The frame has been refined to decrease friction and allow the device to glide easily on the rope.For use with ropes between 8 and 13mm in diameter:120g

FOOTAPE C47Weight:76g

Adjustable webbing foot loop

FOOTCORD C48Weight:45g

Adjustable cord foot loop for caving

48

www.petzl.com

Ascenders

Mike Fuselier on Venus de Jilo (8b+), Petzl Roc Trip Mexico

Multi-purpose ascenders

BASIC B18AAA

Multi-purpose lightweight ascender

A lightweight, compact multi-purpose ascender that works perfectly for hauling systems, ascending fixed lines and for self-protection when climbing with a fixed rope.For use with ropes between 8 and 13mm in diameter:135g

SHUNT B03

Back-up ascender

Used below the rappel device, the SHUNT works as a rappel back-up and replaces self-jamming knots like the Prusik. Works on single and double ropes.For use on single 10-11mm ropes or double 8-11mm ropes, weight:188g

MICROCENDER B54

Compact and lightweight ascender

This multi-purpose ascender can be used on fixed ropes or in hauling systems.For use with ropes between 8 and 13mm in diameter:162g

TIBLOC B01

Compact emergency ascender

In a bind, this ultra-lightweight ascender can be used to build hauling systems or as a Prusik-replacement in selfrescue situations. Use with the ULTRALEGERE pulley for an ideal lightweight, compact emergency hauling kit.For use with ropes between 8 and 11mm in diameter:39g

49

www.petzl.com

John Evans

PulleysSingle pulleys

ULTRALEGERE P00A

Pulley for occasional use

The ULTRALEGERE is a simple nylon sheave that can be installed on a carabiner.Rope compatibility on single ropes:7 - 13mm. Weight:10g

OSCILLANTE P02A

Swing-sided pulley for emergency use

The OSCILLANTE weighs practically nothing and can be used in crevasse rescue systems or improvised hauling systems.Rope compatibility on single ropes:7 - 11mm, efficiency:71%, weight:42 g

FIXE P05SO

Pulley with fixed side plates

The FIXE pulley is lightweight, compact, and quick to install on the rope. It offers a good balance between weight and strength.Rope compatibility on single ropes:7 - 13 mm, efficiency:71%, weight:90g

PARTNER P52A

Compact pulley with swinging side plates

The PARTNER pulley is compact and light, yet ensures excellent efficiency thanks to its aluminum sheave mounted on sealed ball bearings.Rope compatibility on single ropes:7 - 11mm, efficiency:91%, weight:56g

RESCUE P50A

Ultra-strong pulley with swinging side plates

The RESCUE pulley is very strong and efficient: ideal for rescue, hauling heavy loads and intensive use.Rope compatibility on single ropes:7 - 13mm, efficiency:95%, weight:185g

Prusik pulleys

MINI P59A

Lightweight Prusik pulley

The lightweight MINI can handle big loads, but is small enough to go almost anywhere or be carried on the harness.Rope compatibility on single ropes:7 - 11mm, efficiency:91%, weight:80g

GEMINI P66A

Double Prusik pulley

The GEMINI double pulley is equipped with an auxiliary attachment point for use in technical hauling systems.Rope compatibility on single ropes:7 - 11mm, efficiency:91%, weight:135g

50

www.petzl.com

PulleysProgress capture pulleys

MINITRAXION P07

Compact and lightweight self-jamming pulley.

The compact MINITRAXION has threedistinct modes of operation (pulley, progress capture pulley, ascender), making it the ideal companion for extended vertical adventures. Use it for hauling light loads, self-belay, ascending a rope and self-rescue.Rope compatibility on single ropes:8 - 13mm, efficiency:71%, weight:165g

PROTRAXION P51

Very efficient progress capture pulley.

The PROTRAXION is designed for hauling heavy loads and is ideal for aid climbing and rescue.Rope compatibility on single ropes:8 - 13mm, efficiency:95%, weight:265g

Transport pulleys

TANDEM P21

Double pulley for use with ropes

The TANDEM is designed for smooth and efficient Tyrolean traverses on rope.Rope compatibility on single ropes:13mm, efficiency:71%, weight:195g

TANDEM CABLE P21 CAB

Double pulley for use with ropes and cables

The TANDEMCABLE is designed for smooth and efficient Tyrolean traverses on rope.Rope compatibility on single ropes:13 mm, cables 12mm, efficiency:71%, weight:258g

TANDEMSPEED P21SPE

Efficient double pulley for use on ropes and cables

The TANDEMSPEED is the fastest of the transport pulleys and is specifically designed for lower-angle tyroleans.Rope compatibility on single ropes:13 mm, cables 12mm, efficiency:91%, weight:270g

Crevasse rescue kit

CREVASSE RESCUE KIT K25 SC2

Kit containing the equipment needed for hauling/ascending in crevasse rescue situations: MINITRAXION pulley, two OKSCREW-LOCK carabiners, TIBLOC, OSCILLANTE pulley, 120cm STANNEAU sling

The crevasse rescue kit contains everything needed for setting up a hauling system or a rope ascent in case of a fall into a crevasse. Before putting the gear onto his harness, the user can make sure that he has everything, thanks to the printed visuals on the inside of the storage bag. This kit is essential for glacier travel (on skis or on foot).Rope compatibility on single ropes:8 - 13 mm. Weight:585 g

51

www.petzl.com

Packs

52

www.petzl.com

Georges Aureau descending the Alloix Canyon, Chartreuse, France Jocelyn Chavy

PacksClimbing pack

BUG S71

Backpack for single day multi-pitch climbing

The BUG was designed specifically for multi-pitch, long routes that are done in a single day. Its rounded rectangular shape maximizes volume and minimizes interference while in use. The volume is ideal for carrying gear on the approach and when climbing (hydration system, food, clothing, shoes,etc). Everything has been designed for maximum comfort while climbing with the BUG on the back: minimal bulk, shoulder straps allowing freedom of arm movement, comfortable and ventilated back panel, foldaway waistbelt, high positioning allows access to back of harness (for chalkbag, gear), lateral compression straps.Volume:18liters, weight:570g

Caving packs

TRANSPORT C02

Large capacity comfortable caving packVolume:45liters, weight:1050g

Comfortable backpack for use on long approaches and in large underground networks.

PORTAGE S32

Large capacity caving packVolume:35liters, weight:760g

Large capacity bag for approaches and all caving use.

CLASSIQUE C03

Medium capacity caving pack with round baseVolume:22liters, weight:600g

PERSONNEL C14Small caving packVolume:15liters, weight:470g

Canyoning packs

ALCANADRE S64

Comfortable canyoning packVolume:37liters, weight:700g

Bag designed for canyoning including the approach.

ARTUBY S63

Canyoneering packVolume:22liters, weight:520g

53

www.petzl.com

PacksChalk bags, chalk

BANDI S38 P

Classic cylinder shaped chalk bag

The BANDI's classic round shape with reinforced large opening allows for easy access. The soft fabric is pleasant to the touch (like a peach) and wont cause discomfort when wearing a pack or when your back is against a rock wall. It can be opened with only one hand should you forget to open it before you start climbing. The closure system is efficient, thanks to the cordlock with integrated emergency whistle.

KODA S39 P

Chalkbag with ergonomic shape

The KODA's ergonomic shape allows easy access to the chalk. The soft fabric is pleasant to the touch (like a peach) and wont cause discomfort when wearing a pack or when your back is against a rock wall. It can be opened with only one hand should you forget to open it before you start climbing. The closure system is efficient, thanks to the cordlock with integrated emergency whistle.

KODAPOCHE S40 P

Ergonomically shaped chalk bag with pocket

The KODAPOCHE is a variation of the KODA chalkbag with a baffled pocket perfect for storing your keys, spare change, a granola bar, a small e+LITE headlamp, or topo map without risk of loss due to the zipper and weather resistant flap. The ergonomic shape makes it easy to access the chalk. The soft fabric is pleasant to the touch (like a peach) and wont cause discomfort when wearing a pack or when your back is against a rock wall. It can be opened with only one hand should you forget to open it before you start climbing. The closure system is efficient, thanks to the cordlock with integrated emergency whistle.

POWER CRUNCH P22B 25, P22B 100, P22B 200Chunky chalkPetzls POWER CRUNCH chalk is available in three sizes (25g, 100g, and 200g), convenient for every climber. The small 25g size is the perfect amount for a day at the crag or a session at the gym. The 100g size is big enough to fill a chalkbag with some left over for a refill. The 200g is ideal for those with chalk hungry hands who never seem to have enough chalk to get through a tough summer day of climbing.

Rescue litter

NEST S61

Rescue litter for cave rescue

Litter developed in partnership with the French national cave rescue organization.Dimensions:190 x 50 x 5 cm, weight:11.5 kg

54

www.petzl.com

AnchorsIce protection Rock anchors

LASERSONIC P70

V CONIQUE 66007, 66011

Ice screw with integrated handle

Chromoly steel channel piton

For rapid ice protection, there is nothing faster than the LASERSONIC. The innovative hanger/handle makes placing the screw a breeze. The design also allows the screw to be removed when still attached to the rope, helping to prevent accidental loss.

Hard chromoly steel piton for flared, rounded cracks ingranite and hard rocks.

ROCHER MIXTE 65106, 65108, 65110Semi-hardened steel forged pitonPiton for thin, parallel-sided cracks in limestone orgranite.

LASER P71Ice screwLighter weight and simpler version of the LASERSONIC. Designed for use with the TURBINE crank for quick placements.

UNIVERSEL 65406, 65408, 65410

Semi-hardened steel forged piton

Piton for flared cracks in limestone orgranite.

Ice protection accessories

TURBINE 65050

U 65312, 65314

Semi-hardened steel forged piton

Crank for ice screws

Piton for wide cracks in limestone orgranite.

Crank for placing and removing LASER ice screws.

ICEFLUTE V10

LIVANOS 65504, 65506, 65508, 65510Chromoly steel channel piton

Protective ice-screw holder

This holder protects fiveice screws from damage and protect the climber from the screws sharp edges. Securely holds screws and allows for quick, onehanded use. Can be attached directly to a harness or worn on the chest.

COEUR P34050, P38150

Multi-directional stainless steel bolt hanger

SNOWTUBE 68810, 68820Snow anchorPlanted or buried as a dead-man, the SNOWTUBE can be used for a variety of purposes: anchoring a fixed line, staking out a tent,etc. Available in threelengths.

COEURGOUJON P32, P33Complete anchor assemblyComprised of a COEUR hanger, expansion bolt and nut.

HAND HOOK 64801

Suspension hook for ice and mixed climbing

BATINOX P57

14mm resin anchor

Especially suited for soft rock.

MULTIHOOK 04950Multipurpose hook

AMPOULE BATINOX P41 NITRO 3 67800Resin glue for BATINOX Energy absorber for use as quickdrawRequired for placing the BATINOX anchor.

55

www.petzl.com

AnchorsRock anchors Rock and caving anchor accessories

COLLINOX P55

10mm resin anchor

BONGO P27

Designed for long-term installation.

Piton hammer

For trad climbing, aid climbing or for equipping new routes.

AMPOULE COLLINOX P56Resin glue for COLLINOXRequired for placing the COLLINOX anchor.

TAM TAM P16

Caving hammer

Caving anchors - maillons

Designed for placing bolt anchors with a hand drill.

VRILLEE P13

Caving bolt hanger

ROCPEC P26

SDS-bit hand drill

Hand drill that accepts SDS drill bits.

COUDEE P04

Caving bolt hanger

ROCPECADP P26250

Holds the carabiner perpendicular to the rock: helps keep the rope away from the rock.

Adaptor for ROCPEC drill

Increases the ROCPECs versatility and providesgreater comfort and efficiency when placing 12mm self-drilling expansion bolts.

CHEVILLE AUTOFOREUSE P12Self-drilling expansion bolt anchor

PERFO SPE P08

Drill for self-drilling anchors

DELTA P11

BOLTBAG C11 A

Triangular maillon

Bolting equipment pouch

SPEEDY P14

PROTEC C45

Rope protector

Maillon with rapid gate

Helps protect the rope from sharp edges.

PRESTO P10

Maillon with wide rapid gate

SWIVEL S P58 S

Ball bearing swivel

Positioned between the rope and the load, the swivel allows the load to turn without twisting the rope.

GO P15

Oval maillon

PAW S P63 S DEMIROND P18Semi-circular maillon

Rigging plate

For organizing the belay and creating a system with multiple anchors. Useful in aid climbing and for setting up Tyrolean traverses.

56

www.petzl.com

AccessoriesGloves

GOUTTE DEAU P06

Large radius progression hook

CORDEX K52

Lightweight belay/rappel gloves

REGLETTE P06 S

Small radius progression hook

CORDEX PLUS K53

Lightweight belay/rappel gloves

QUICKSTEP C09

Adjustable single-step etrier for aid climbing

Sewn slings

ANNEAU C40

Polyester sling

To set up a belay or an anchor, or to extend an anchor point.

WALLSTEP C01

7-step etrier for aid climbing

STANNEAU C07Dyneema slingA lighter alternative to the all-nylon slings, these are color coded for ease in length identification.

LOOPING C25

4-step etrier for aid climbing

FINANNEAU C06

GRADISTEP C08

Ultralight Dyneema

Petzl Sport Catalog 2011 En

Documents

Transcript of Petzl Sport Catalog 2011 En