PERMAS - INTES · A letter confirming your registration will be instantly forwarded to you....
Transcript of PERMAS - INTES · A letter confirming your registration will be instantly forwarded to you....
© IN
TE
S 2
01
8
Invitationto attend the
PERMAS Users’ Conferenceon
April 12-13, 2018in
Stuttgart
INTES cordially invites you to attend the forthcoming 14th PERMAS Users’ Conference at the Schwabenland-halle in Fellbach near Stuttgart.
An interesting and diversified program of presentations provides a perfect opportunity to hear about new appli-cations and new software developments. As usual, suf-ficient time will be allocated to exchange experiences with other users and to discuss your points of interest with developers of PERMAS.
Beside numerous customer contributions, a few presen-tations will show applications of newest PERMAS deve-lopments.
Almost all contributions are presented by the PERMAS user community and addresses an international audien-ce. The conference language is English. The program of the conference is attached in the current state.
An accompanying exhibition will highlight the environ-ment of PERMAS applications.
RegistrationPlease register by March 29, 2018, using the attached form. A letter confirming your registration will be instantly forwarded to you.
Conference feeThe conference fee is EUR 320. For each two participants from the same organisation one additional person can attend free of charge, when all three participants are registered together. University staff will pay only EUR 160. Presenters are free of charge. VAT must still be added to all fees, if applicable. The conference fee includes conference proceedings, beverages, coffee breaks, attendance in the presentations, lunch on both days and a social event.
Cancellation policyCancellations received by March 9, 2018 will be re-funded 100%. Unfortunately, we will not be able to refund any cancellation received at a later date. Of course, you can nominate a substitute for the registered person instead.
Vegetarian foodMeals offered during the conference will include vegetable dishes. If you do not eat meat, please indicate this in the registration form.
Conference languageThe conference language is English.
Conference dateThu, April 12 andFri, April 13, 2018
VenueSchwabenlandhalle FellbachTainer Str. 7D-70734 Fellbachwww.schwabenlandhalle.de
Hotel reservationsIn the hotel Best Western Plus, located close to the venue, a number of rooms are reserved for stays from April 11 to 13, 2018 for a price from 144 EUR per room and night. Please book your room until February 28, 2018 with the keyword "PERMAS UM2018". The address is Tainer Str. 9, 70734 Fellbach, Germany, e-Mail reservierung@ bestwes-tern-fellbach.de. Payment to be made directly with the ho-tel. If you want to get other ho-tel options, please tick the box on the registration form.
Conference secretaryClaudia KraussINTES GmbHBreitwiesenstr. 28D-70565 StuttgartTel.: +49-711-784 99-30Fax: +49-711-784 99-10Email: [email protected]: http://www.intes.de
Users’ ConferenceStuttgart 2018
PERMAS
ProgrammProgram
Donnerstag, 12. April 2018 / Thursday, April 12, 2018
08:30 Anmeldung / Registration
09:30 Begrüßung / Welcome
09:45 Simulation of the mounting process of a metal
clip - Non-linear material and contact updateR. Handel, J. van Delden, MAHLE GmbH
Usage of contact update in gearbox calculationK. Drazdil, ZF Friedrichshafen AG
Dynamic simulation with non-linear damping
devicesV. Le Gallo, Ariane Group; J. Marchesini, L. Dastugue,
INTES France
11:00 Kaffeepause / Coffee break
11:30 PERMAS Version 17
M. Ast, INTES GmbH
12:30 Mittagessen / Lunch
14:15 VisPER Version 6O. Sommer, INTES GmbH
Making PERMAS model assembly effective
using VisPERM. Klein, O. Sommer, INTES GmbH
15:15 Kaffeepause / Coffee break
15:45 Air intake module optimization from multi-
physical analysesL. Legot, M. Henner, N. François, VALEO Thermal Systems;
J. Marchesini, L. Dastugue, INTES France
Multidisciplinary optimization of aero-engine
compressor and turbine componentsT. Lengyel-Kampmann, DLR, Institute of Propulsion
Technology
Software-assisted design check for additive
manufactured componentsJ. Tominski, St. Lammers, Paderborn University, Direct
Manufacturing Research Center (DMRC)
Topology optimization to maximize the dynamic
input stiffness of a coach structure
N. Kuppuswamy, P. J. Eberle, G. Steinmetz, Daimler Buses;
A. Schünemann, INTES GmbH
17:30 Ende des Vortragsprogramms / End of presentations
18:00 Abendveranstaltung / Social event
Freitag, 13. April 2018 / Friday, April 13, 2018
09:00 Fan design based on multi-parameters
sampling process with PERMAS/VisPERM. Henner, B. Demory, VALEO Thermal Systems;
K. Gokpi, J. Marchesini, INTES France
Efficient design creation and validationR. Fischer, Chr. Wulf, TY. Wang, INTES GmbH
Modal correlation of a brake caliper - boundary
conditions optimizationZd. Podzemný, Porsche Engineering Services; S. Carvajal,
Porsche AG
10:15 Kaffeepause / Coffee break
10:45 Simulation of contact between cam lobe and
tube of assembled camshafts using module
CAUW. Krepulat, F. Mohr, MAHLE GmbH
Design and validation of a piston pin in
composite materialP. Spola, M. Morone, Altran
Laminate optimization capabilities applied to
a racing car monocoqueM. Kinscher, Porsche AG; Chr. Wulf, INTES GmbH
Rake and drive-head design for a thickener
used in the treatment of acid mine drainage:
A case of displacements large and small R. Minnaar, Advanced Structural Mechanics
12:30 Mittagessen / Lunch
14:15 The PERMAS-DIGIMAT interface – Accurate
structural analysis of reinforced plastic
components R. Handel, J. van Delden, T. Kaiser, MAHLE GmbH
A study about solid rivet model considering
shear resistance mechanism and pretension
forceM. Shimozono, INTES Japan
15:15 Schlußwort / Final remark
15:20 Fairwell-Kaffee / Fairwell Coffee
16:00 Ende der Konferenz / End of conference
© IN
TE
S 2
01
8
Die PERMAS Anwenderkonferenz 2018 in Stuttgart wird veranstaltet vonThe PERMAS Users’ Conference 2018 in Stuttgart is organized by
INTES GmbH, Breitwiesenstr. 28, D-70565 Stuttgart T +49-711-78499-0, F +49-711-78499-10, E [email protected], W www.intes.de
Users’ ConferenceStuttgart 2018
PERMASStand 16.03.2018 / As of Mar. 16, 2018
RegistrationAnmeldungPlease forward to: / Bitte senden an:
INTES GmbH, Breitwiesenstr. 28, D-70565 Stuttgart
Fax: +49-711-78499-10 or / oder
E-Mail: [email protected]
© IN
TE
S 2
01
8
INTES Ingenieurgesellschaft für technische Software mbH
Die PERMAS Anwenderkonferenz 2018 in Stuttgart wird veranstaltet vonThe PERMAS Users’ Conference 2018 in Stuttgart is organized by
Breitwiesenstr. 28D-70565 Stuttgart
T +49-711-78499-0F +49-711-78499-10
E [email protected]: http://www.intes.de
I would like to register for the PERMAS Users’ Conference on April 12-13, 2018 (the regi-stration is binding):
1 I would appreciate your assistance in my hotel arrangements. Arrival _____________, Departure _____________
1 I will attend the social event on April 12, 2018, 6 p.m..
1�No. of accompanying persons _____ attending the social event (for EUR 90 + VAT each).
1 I order vegetarian dishes.
The conference fee is EUR 320. For each two participants from the same organisation one additional person can attend free of charge, when all three are registered together. University staff will pay only EUR 160. One presenter per presentation is free of charge. Additional tickets for the social event on April 12 for accompanying persons may be obtained at EUR 90 per person. VAT must still be added to all fees, if applicable.
The conference fee includes conference material, beverages, coffee breaks, attendance in the presentations, lunch on both days and a social event in the evening.
Cancellations received by March 9, 2018 will be refunded 100% of the conference fee. Unfortunately, we will not be able to refund any cancellation received at a later date. Of course, you can nominate a substitute for the registered person instead.
Name:
_____________________________________________________________________________________
Company:
_____________________________________________________________________________________
Dept.:
_____________________________________________________________________________________
Address/Billing address:
_____________________________________________________________________________________
_____________________________________________________________________________________
Phone/Fax/email:
_____________________________________________________________________________________
Date:
_____________________________________________________________________________________
Signature:
_____________________________________________________________________________________
Official stamp:
Users’ ConferenceStuttgart 2018
PERMAS
PER
MA
S U
sers
’ C
on
fere
nce
12
-13
Ap
ril
20
18
Tag
un
gso
rt / Venue
Sch
wab
en
lan
dh
alle
Fellb
ach
Tain
er
Str
. 7
D-7
07
34
Fellb
ach
ww
w.s
chw
ab
en
lan
dh
alle
.de
Use
rs’ C
on
fere
nce
Stu
ttg
art
2018
PERMAS
PER
MA
S U
sers
’ C
on
fere
nce
12
-13
Ap
ril
20
18
Tag
un
gso
rt / Venue
Sch
wab
en
lan
dh
alle
Fellb
ach
Tain
er
Str
. 7
D-7
07
34
Fellb
ach
ww
w.s
chw
ab
en
lan
dh
alle
.de
Use
rs’ C
on
fere
nce
Stu
ttg
art
2018
PERMAS
PERMAS Users’ Conference12-13 April 2018
Tagungsort / VenueSchwabenlandhalle FellbachTainer Str. 7D-70734 Fellbachwww.schwabenlandhalle.de
Stop "Schwabenlandhalle" of tram line 1 (about 20min. from Stuttgart City)
Free parking for conference participants
Access
to
park
ing
an
d c
on
fere
nce
Entrance
X
Tainer Straße
Users’ ConferenceStuttgart 2016
Users’ ConferenceStuttgart 2018
PERMAS