Supporting A-level Geography Students Online …at Kingston College 2004/5 LSDA Q Project.
Peaks Introduction Kaba Peaks® - · PDF fileand removable core designs. ... Schlage & LSDA...
Transcript of Peaks Introduction Kaba Peaks® - · PDF fileand removable core designs. ... Schlage & LSDA...
101
Kaba
Pea
ks
Kaba Peaks®
Peaks Preferred is the most adaptable patented key control system avail-able—designed to retrofit virtually every manufacturers’ grade 1 and grade 2 door hardware. Retrofit cylinders include conventional mortise, rim, deadbolt and padlock, key-in-knob/lever, as well as interchangeable core and removable core designs. Because the patented system can be master keyed, no matter what hardware is used at a facility, you can use one Peaks Preferred key to operate all the locks.
Peaks Preferred keys are also “backwards compatible” with Peaks Classic cylinders which allows for an easy phase-in to upgrade facilities.• Retrofits to most manufacturers’ door hardware.
• Can be master keyed to provide convenience and security.• Cost-effective; replace only the cylinder, not the hardware.• Manufactured to stringent quality standards.• Reliable pin tumbler technology.• Easy to assemble and service.• No special key cutting equipment required.• Backwards compatible with Peaks Classic cylinders.• All stocked in 140 spacing to allow compatibility between cylinder types.
What is Peaks Preferred?
Peaks Preferred patented key control system provides you with the flexibility of a system that can be master keyed, and gives you complete control over key duplica-tion, including legal protection against unauthorized manufacture or sale of key blanks, cut keys, and pinned cylinders.
Peaks Preferred works by restricting key duplication, allowing only a designated signatory’s authorization of key blanks and cylinders through authorized dealers.
Peaks Preferred is extremely easy to assemble and service with no dreaded side bars to install, or specialty equipment needed for assembly or to cut keys. Based on an extremely solid Peaks Classic platform.
Peaks Preferred is built using reliable pin tumbler technology utilizing a patented “peaks” pin as part of the security. The new “peaks” pin has a recess on the bottom that must match the “peak” found on the Peaks Preferred key. If a key without the
”peak“ is inserted, there will be no shear- line created in the cylinder. Therefore, the lock will not open.
How Peaks Preferred Works
A “One-Key” System
Rim
Mortise
Small Format I/C Core
Large Format I/C Core
Key-in-Knob/Lever, Deadbolts
Peaks Preferred Patented Key Control System is the industry leader in compatibility with all major hardware brands. With cylinders that fit more manufacturers’ locks than any other patented key system, Peaks Preferred allows cost effective upgrades to convert all existing locking hardware for an entire property, or just certain doors to a patented key system.
Peaks Preferred allows for integration of all conventional, key-in-lever, small and large format cylinders while still using a single key. No other manufacturer offers this extensive retrofitability within a system.
DealersPeaks is a proprietary offering and is such is available only to qualified dealers.
Dealerships are available to cover geographic territories. Please con-tact your branch for requirements and availability.
Peaks Introduction
102
Kaba
Pea
ks
Kaba Peaks®
3400 25 1010
3400 25 1006
3400 25 1065
3400 25 1004
Corbin Grade 1
Mfg # Type Kwy Finish EZ #3400 25 1 1004D Classic D Satin Chrome 035952
3400251004G Classic G Satin Chrome 039253
• Corbin/Russwin CK4200 grade 1 knobs and UT5200 unit locks
Mfg # Type Kwy Finish EZ #3400 25 1006D Classic D Satin Chrome 007597
3400 25 1006H Classic H Satin Chrome 064717
Schlage & LSDA• For Arrow, LSDA, and Schlage.• Includes one security bushing and three
fixed tailpieces.• Accepts original Kaba, Ilco, Marks, Sar-
gent, and Arrow fixed tailpieces.
Sargent Type 1
• Sargent 7, 8, and 9 Line
Mfg # Type Kwy Finish EZ #3400 25 1 008H Classic H Satin Chrome 061827
3400 25 1008
Sargent Type 2
Mfg # Type Kwy Finish EZ #3400 25 1010D Classic D Satin Chrome 068178
3400 25 1010H Classic H Satin Chrome 068175
• Sargent kit for 6, 10, 65 Line and 2000 exit device trim.
• Includes security bushing and one fixed tailpiece.
Mfg # Type Kwy Finish EZ #3400251013D Classic D Satin Chrome 039256
Falcon S Lock
Mfg # Type Kwy Finish EZ #3400251062G Classic G Satin Chrome 039264
Old Schlage Double DeadboltOld Schlage Double Deadbolt
Sargent 6 Line
Mfg # Type Kwy Finish EZ #3400 25 1 065H Classic H Satin Chrome 061518
• 6 Line grade 2 Ball knobs• 3400 25 1095 will perform same
function.
Mfg # Type Kwy Finish EZ #3400 25 1095D Classic D Satin Chrome 071375
3400 25 1095G Classic G Satin Chrome 076444
3400 25 1095H Classic H Satin Chrome 071058
Small Diameter Universal
• Cal-Royal LSDA single cylinder dead-lock -01
• Cal-Royal & LSDA double cylinder deadlock -01
• Falcon D series deadlocks -01• Falcon X series knobs/unit locks -21• Sargent 6 Line knobs, except Ball -10• Sargent 10 Line levers -10
• Sargent 2000 Exit Device trim -10• Sargent 6500 Line -10• Sargent 6 Line grade 2 Ball knobs -65• Weiser D9370/9470 series deadlocks
-01• Yale 5300L grade 2 levers -95• Yale 5300LN grade 2 levers -56
• Small diameter plug face application• Includes three fixed and three lost motion tailpieces.
KIK/KIL, & Deadbolt Cylinders
103
Kaba
Pea
ks
Kaba Peaks®Large Diameter Universal
• Large diameter plug face application• Includes three fixed and three lost motion tailpieces.
• Arrow H, L, S & W series & M series levers -09
• Arrow M series Ball knobs -20• Arrow Q series levers -09• Arrow Single Cyl. Deadlocks -90• Arrow Double Cyl. Deadlocks -92• Cal-Royal BA grade 2 knobs -14• Cal-Royal CGN grade 1 levers & SL
grade 2 levers -09• Corbin/Russwin CL3800 -01*• Corbin/Russwin CL3300 -20• Corbin/Russwin CL3400 & CL3600 -11• Corbin/Russwin ED8000-A5/N5 lever
trim -11• Dorma Grade 1 CL853, 873, 880,
880EU, 880EL, 882, 885, CK853, 873, 880, 880EU, 880EL, 882, 885 -44*◊
• Dorma Grade 1 CL860, 870, 872, 877, CK860, 870, 872, 887 -45*◊
• Dorma Grade 2 CL753, 770, 780, CK753, 770, 780 -14
• Dorma Grade 2 CL651, 670, CK651, 670 -42*◊
• Dorma Grade 2 CL680, CK680 -43*◊• Dorma Grade 2 DB660 -46*◊• Dorma Grade 2 DB662 -47*◊• Falcon X series knobs, except Hana -12• Falcon B series grade 2 levers -18• Falcon F & N series levers -17• Falcon LY grade 1 levers -23• Falcon S series knobs, except Hana -13• Falcon S series Hana knobs -33• Falcon T series levers -01*• Kaba 1411 padlocks -41• LSDA LS100B, 100P, 100T knobs -14• LSDA LX1000 grade 1 levers (pre 94)
-99ץ LSDA LH1000 grade 1 knobs -17
• LSDA LX1000 grade 1 levers (98) & LX1400 grade 1 storeroom lever -18
• LSDA L100 grade 2 levers -18• LSDA 20R & 25R• LSDA 220 single cyl. deadlocks -90• LSDA 225 double cyl. deadlocks -01*• Marks 110, 120 series -14• Marks 130 series deadlocks -01*• Marks 170, 190, 195 series levers -01*• Marks 210 series knobs -01*• Master Pro Series padlocks -01*• New Standard Brass padlocks -41• Olympus 700LC, 800LC* Note 1• Omnilock Knob, key by-pass -17• Omnilock Lever, key by-pass -09• Sargent 5500 Line grade 2 knobs -14• Sargent 465, 485, 486 single cyl. dead-
locks -90• Sargent 464, 484 double cyl. dead-
locks -92• Schlage A series, non-Orbit knobs -14• Schlage A series, Orbit knobs -07• Schlage AL series levers -20• Schlage B single cyl. deadlocks -90• Schlage B double cyl. deadlocks -92• Schlage C & D series grade 1 knobs
-17• Schlage C & D series grade 1 levers
-09• Schlage S series grade 2 levers -01• Schlage PL series & Old style 45-101
padlocks -01• Select/Medeco 2000/All-N-One dead-
locks -01• Trilogy 2500 by-pass knob -17• Trilogy 2500 by-pass lever -09• Von Duprin 22 series exit knob trim
-07
Mfg # Type Kwy Finish EZ #3400 25 1099D Classic D Satin Chrome 068176
8400 25 1099D Preferred D Satin Chrome 100206
3400 25 1099G Classic G Satin Chrome 068964
3400 25 1099H Classic H Satin Chrome 068177
8400 25 1099H Preferred H Satin Chrome 100207
8400 25 1099R Preferred R Satin Chrome 100017
• Uses Olympus Kit #78-Kaba-Conv• * Uses tailpieces supplied by manu-
facturer• ◊ Uses tailpieces sold separately:
-42 (3400-00-4020); -43 (3400-
00-4021); -44 (3400-00-4015); -45 (3400-00-4016); -46 (3400-XX-5100); -47 (3400-XX-5110); -99 (Field modification of tailpiece re-quired)
3401 25 10188401 25 1018
Mfg # Type Kwy Length Finish EZ #3401 03 1018D Classic D 1-1/8” Polished
Brass007611
3401 25 1018D W/AR CAM
Classic D 1-1/8” Satin Chrome 060640
3401 25 1018D W/STD CAM
Classic D 1-1/8” Satin Chrome 007610
8401 25 1018D Preferred D 1-1/8” Satin Chrome 100208
3401 25 1018G Classic G 1-1/8” Satin Chrome 028976
3401 11 1018H Classic H 1-1/8” Oil Rubbed Bronze
063874
3401 25 1 018H W/AR CAM
Classic H 1-1/8” Satin Chrome 061519
8401 25 1018H Preferred H 1-1/8” Satin Chrome 100209
8401 25 1018R Preferred R 1-1/8” Satin Chrome 100025
3401251014D Classic D 1-1/4” Satin Chrome 039267
3401251014G Classic G 1-1/4” Satin Chrome 039269
Mortise Cylinders
• 1-1/8” Cylinders are supplied with Adams Rite cams unless otherwise specified.
• 1-1/4” Cylinders are supplied with Stan-dard cams unless otherwise specified.
Universal & Mortise Cylinders
104
Kaba
Pea
ks
Kaba Peaks®
6840 25 10068940 25 1006
3840 25 10068840 25 1006
3402 25 10108402 25 1010
Mfg # Type Kwy Fasten Finish EZ #3840 25 1006D Classic D Cover Satin Chrome 007624
8840 25 1006D Preferred D Cover Satin Chrome 100214
3840 25 1006H Classic H Cover Satin Chrome 061521
8840 25 1006H Preferred H Cover Satin Chrome 100215
6840 25 1006D Classic D Cover Satin Chrome 063662
8940 25 1006D Preferred D Cap Satin Chrome 100212
6840 25 1006H Classic H Cap Satin Chrome 063876
8940 25 1006H Preferred H Cap Satin Chrome 100213
8940 25 1006R Preferred R Cap Satin Chrome 100031
Rim Cylinder
Mfg # Type Kwy Tail Finish EZ #3402 25 1010D Classic D Standard Satin Chrome 007600
3402 25 1012D Classic D Sargent Satin Chrome 029763
8402 25 1210D Preferred D Standard Satin Chrome 100210
3402251010E Classic E Standard Satin Chrome 039271
3402251012G Classic G Sargent Satin Chrome 039276
3402 25 1010H Classic H Standard Satin Chrome 064721
8402 25 1210H Preferred H Standard Satin Chrome 100211
8402 25 1010R Preferred R Standard Satin Chrome 100027
Small Format I/C Core• For small format cylinders &
locksets as supplied by Best, KSP, Arrow, Marks, LSDA, & others.
• 3840 & 8840 cylinders are held in place with a spring cover
• 6840 & 8940 cylinders are held in place with cap pins.
• All stocked .140 spacing to key with standard cylinders.
• Stocked with standard tail-piece or Sargent exit device type tailpiece.
Mfg # Type EZ #3418 00 3001 Adams Rite Standard 007606
3418 00 3002 Standard 007608
3418 00 3003 Cloverleaf 007607
3418 00 3004 Sargent/Yale 029321
3418 00 3008 Adams Rite 4070 039992
3418 00 3009 Schlage L 029320
Mortise Cams
3001 3002 3003 3008 3009
Mfg # Description EZ #3425 00 2006 Mortise & Rim Spring Cover 029843
3800 00 4221 6840 & 8940 I/C Caps 007644
6440 00 2000 KIK Spring Cover Guide 074518
6800 00 2006 3840 & 8840 I/C Spring Cover 063518
3425 00 2006 6440 00 2000 6800 00 2006
3800 00 4221
Cylinder Caps & Covers
Mfg # Body Shackle EZ #1411041004 1-3/4” 3” 039354
1411041008 2” 3” 039355
Padlocks
• Accepts large diameter universal cylinders.
1411041004 1411041008
Rim & I/C Core Cylinders, & Accessories