PDT Engineering: ProE Tip #004
-
Upload
product-development-technologies -
Category
Design
-
view
371 -
download
3
description
Transcript of PDT Engineering: ProE Tip #004
![Page 1: PDT Engineering: ProE Tip #004](https://reader036.fdocuments.net/reader036/viewer/2022082702/55617eabd8b42ade208b5454/html5/thumbnails/1.jpg)
1
ProE Tip of the Week: ECAD ImportQuick Tip to reduce ECAD file size and make your model more robust
![Page 2: PDT Engineering: ProE Tip #004](https://reader036.fdocuments.net/reader036/viewer/2022082702/55617eabd8b42ade208b5454/html5/thumbnails/2.jpg)
2
ECAD Step #1: Save a copy of the ECAD as a SHRINKWRAP file. File > Save a Copy > Change the type → Shrinkwrap
Benefits of savings as a shrinkwrap file:• File quantity reduced to 1 part for the entire ECAD assembly• Regeneration is more robust• Reduces design time• ECAD components in shrinkwrap will always stay associated with parent placement
![Page 3: PDT Engineering: ProE Tip #004](https://reader036.fdocuments.net/reader036/viewer/2022082702/55617eabd8b42ade208b5454/html5/thumbnails/3.jpg)
3
ECAD Step #2: Modify the shrinkwrap settings
Save as a merged solid
Change Quality to 7This makes sure the height / placement are captured correctly. The higher the quality the longer it takes to process.(7 should be sufficient for most files)
![Page 4: PDT Engineering: ProE Tip #004](https://reader036.fdocuments.net/reader036/viewer/2022082702/55617eabd8b42ade208b5454/html5/thumbnails/4.jpg)
4
ECAD Step #3: Make an assembly with the shrinkwrap file overlaid on the original ECADColor the shrinkwrap file blue > show the shrinkwrap in wireframe
The blue wireframe shrinkwrap file shows that it didn’t import correctly. It shows a height difference of 0.2mm. If you see a mistake, redo the shrinkwrap and increase the quality until you capture the correct ECAD layout
![Page 5: PDT Engineering: ProE Tip #004](https://reader036.fdocuments.net/reader036/viewer/2022082702/55617eabd8b42ade208b5454/html5/thumbnails/5.jpg)
5
ECAD Step #4: Assemble the ECAD shrinkwrap to your model
Once you have a correct ECAD shrinkwrap, use this to assemble to your model. Now you have 1 part in the model tree instead of several hundred!