Pankaj Sarin - Oklahoma State University–Tulsa...Jan 07, 2019 · Curriculum Vitae, Pankaj Sarin...

Curriculum Vitae, Pankaj Sarin (January 7, 2019)

1

Pankaj Sarin Assistant Professor

School of Materials Science and Engineering Oklahoma State University E-mail: [email protected] Phone: (918) 594-8611; Fax: (918) 594-8628 URL: http://mse.okstate.edu/sarin.php

Contents

BACKGROUND ----------------------------------------------------------------------------------------------------------2 Education ----------------------------------------------------------------------------------------------------------2 Professional Experience ----------------------------------------------------------------------------------------2 Awards and Honors ---------------------------------------------------------------------------------------------2

Research -------------------------------------------------------------------------------------------------2 Teaching ------------------------------------------------------------------------------------------------3 Academic -----------------------------------------------------------------------------------------------3

TEACHING ----------------------------------------------------------------------------------------------------------------3 Undergraduate Courses -----------------------------------------------------------------------------------------3 Graduate Courses ------------------------------------------------------------------------------------------------3 Guest Lectures ---------------------------------------------------------------------------------------------------3

RESEARCH ---------------------------------------------------------------------------------------------------------------4 Research Interests -----------------------------------------------------------------------------------------------4 Funded Proposals and Grants ---------------------------------------------------------------------------------4

Approved Proposals for Experiment Time -------------------------------------------------------6 Publications -------------------------------------------------------------------------------------------------------7

Journal Publications ----------------------------------------------------------------------------------7 Conference Proceedings -----------------------------------------------------------------------------10 Book -----------------------------------------------------------------------------------------------------11 Intellectual Property/Patent Applications---------------------------------------------------------12

Presentations and Posters --------------------------------------------------------------------------------------12 Invited (Primary Author) ----------------------------------------------------------------------------12 Invited (Others) ----------------------------------------------------------------------------------------14 Contributed ---------------------------------------------------------------------------------------------17

GRADUATE ADVISING ----------------------------------------------------------------------------------------------27 Ph.D. Dissertations ----------------------------------------------------------------------------------------------27 M.S. Theses -------------------------------------------------------------------------------------------------------27 Other ---------------------------------------------------------------------------------------------------------------27

SERVICE -------------------------------------------------------------------------------------------------------------------28 Department/University Service -------------------------------------------------------------------------------28 Professional Service ---------------------------------------------------------------------------------------------28

Technical Committees --------------------------------------------------------------------------------28 Symposia Organizer ----------------------------------------------------------------------------------29 Session Chair for Symposia -------------------------------------------------------------------------29 Peer Reviewer for Journals --------------------------------------------------------------------------29 Consulting ----------------------------------------------------------------------------------------------30

Participation for Professional Development ----------------------------------------------------------------30

mailto:[email protected]

http://mse.okstate.edu/sarin.php


2

BACKGROUND

Education Ph.D., Materials Science & Engineering Dec. 2002

University of Illinois at Urbana-Champaign (UIUC), Urbana, IL Dissertation: Iron Release from Corrosion Scales in Old Iron/Steel Drinking Water Distribution

Pipes

B. Tech., Ceramic Engineering May 1995

Institute of Technology, Banaras Hindu University (IT-BHU), Varanasi, India

Professional Experience Assistant Professor Jul. 2013 - present School of Materials Science & Engineering Oklahoma State University, Tulsa, OK

Visiting Research Associate Feb. 2011 – Jun. 2013 Department of Materials Science & Engineering University of Illinois at Urbana-Champaign, Urbana, IL Postdoctoral Research Associate Jan. 2003 – Feb. 2011 Department of Materials Science & Engineering University of Illinois at Urbana-Champaign, Urbana, IL

Graduate Research Assistant May 1996 – Dec. 2002 Department of Materials Science & Engineering University of Illinois at Urbana-Champaign, Urbana, IL

Graduate Teaching Assistant Jan. 1996 – May 1996 Department of Materials Science & Engineering University of Illinois at Urbana-Champaign, Urbana, IL

Awards and Honors Research 1. Racheff Award, Outstanding Graduate Research in Materials Science and Engineering,

UIUC (2000).

2. Graduate College Dissertation Travel Grant, UIUC, to conduct research at CSIRO, Melbourne, Australia (2000 – 2001).

3. Graduate College Conference Travel Grant Award, UIUC (March 2000).


3

Teaching 4. Nominated by the College of Engineering Architecture and Technology (CEAT) at OSU to

attend the American Society of Engineering Education’s prestigious and very highly rated National Effective Teaching Institutes (NETI-1B) workshop in June 2015 at Seattle, Washington. This workshop focusses on innovative and effective instructional techniques.

5. Burnett Award, Outstanding Teaching Assistant in Materials Science and Engineering, UIUC (2002 – 2003).

6. Mavis Memorial Fund Scholarship Award, College of Engineering, UIUC (2000 – 2001).

Academic 7. National School on Neutron and X-ray Scattering 2001, Argonne National Laboratory,

Argonne, IL (2001).

8. Merit Award, Banaras Hindu University, 1993, 1994, and 1995.

9. Certificate of Proficiency in Ceramic Technology, Indian Refractory Makers Association, Calcutta, India, 1995.

10. National Talent Scholarship from National Council for Educational Research and Training, India, 1988. (This national scholarship was awarded to only 350 high school students from more than 100,000 competing applicants. Selection was based on a nationwide examination.)

TEACHING

Undergraduate Courses • ENSC 3313: Materials Science (Fall 2015, 2016 and 2017)

Graduate Courses • MSE 5023: Diffusion and Kinetics (Spring 2014, 2015, 2016, 2017, 2018 and 2019)1

• MSE/MAE 5113: Diffraction in Materials (Fall 20142, 2016 and 20183)

• MSE 5153: Crystal Physics and Materials Properties (Fall 2015 and 2017)1

• MSE 5093: Fundamentals of Materials Science (Fall 20184)1

• MSE/MAE 5583: Corrosion Engineering (Spring 20193)

Guest Lectures • MSE 5043: Advanced Characterization of Materials, OSU-Tulsa, Fall 2014

1 Developed this course from the beginning 2 Offered under ENGR 5010 801 Course ID. The course was formally approved as MSE 5113 in December 2014. 3 Offered as lectures in class and as online course. 4 Co-taught with Dr. Ranji Vaidyanathan. Offered as lectures in class and as online course.


4

RESEARCH

Research Interests • In-situ Characterization of Material Properties: High temperature oxidation, phase

transformation, flash sintering, thermal properties (Cp, expansion, conductivity), mechanical properties, ionic conductivity, osteoinduction, solubility, recrystallization.

• Atomic-Structure and Property Relations in Materials: Phase stability, thermal expansion anisotropy, ion-conduction, phase transformation, recrystallization.

• Processing of Advanced Ceramics and Composites: Environmental barrier coatings (EBCs), ultra high temperature ceramics (UHTC), actuators, proton-conducting solid oxide fuel cells, battery electrodes, field assisted sintering, ceramic matrix composites, biotemplated bioceramics, ceramic membranes, high entropy materials, cermets.

• Sustainable and Environmentally Green Materials and Solutions: Geopolymers, precious metal recovery, ceramic membranes for ultra/nanofiltration of produced water, novel electrodes for electrocoagulation of high salinity flow back water, adsorbents for poultry and livestock waste treatment to prevent groundwater contamination.

• Instrumentation Development: For in-situ studies of materials by X-ray diffraction, X-ray total scattering, and Optical and X-ray imaging methods (specifically Digital Image Correlation (DIC), X-ray microcomputed Tomography (µCT), and X-ray Diffraction Contrast Tomography (DCT)).

Funded Proposals and Grants (as PI or Co-PI at Oklahoma State University) 1 United States Geological Survey (USGS) and OSU VPR $24,912 Title: Low-cost Ceramic Membranes for Ultra/Nanofiltration of Produced

Water

Duration: 3/01/2019-2/29/2020; PI: P. Sarin Co-PIs: K. A. Sallam 2 Water Research Foundation & Philadelphia Water Department $12,000 Title: Review of Mineral Characteristics of Iron Tuberculation and Scale on

Cast Iron Mains and the Factors that Impact the Stability of that Scale: Minimization of Iron Release which carries Emerging Contaminants

Duration: 1/1/2019-5/31/2019; PI: P. Sarin


5

4 Florida Turbine Technologies, Inc. $86,8635

Title: Hot Corrosion Testing of Materials for Aviation in Marine Environments

Duration: 1/15/2019-8/31/2019; PI: P. Sarin 5 Swinging for the Fences Program, OSU VPR $24,993 Title: Solar-thermal Desalination of Produced Water Duration: 3/30/2018-6/30/2019; PI: P. Sarin Co-PIs: K. A. Sallam & D. Y.

Kim

6 College of Engineering, Architecture and Technology, and OSU Tulsa $214,887 Title: Advanced Wavelength-Dispersive XRF Spectrometer for non-

destructive analysis of major and trace elements in solids and liquid systems

Duration: 1/1/2017-12/31/2017; PI: R. P. Singh Co-PI: P. Sarin 7 National Science Foundation $405,208 Title: REU Sites: Interdisciplinary Research Experience for undergraduates

interested in Materials Science and Engineering

Duration: 9/1/2015-8/31/2018; PI: R.K. Vaidyanathan Co-PI: P. Sarin 8 GE Global Research $15,000 Title: Modification of the Coefficient of Thermal Expansion Analysis Suite

(CTEAS)

Duration: 4/1/2015-12/31/2015; PI: P. Sarin 9 Oklahoma Center for the Advancement of Science and Technology $89,941 Title: Mechano-chemical Recovery of Platinum Group Metals(PGMs) from

Metal-Foil Supported Spent Auto Catalysts

Duration: 8/1/2015-7/31/2017; PI: P. Sarin 10 Oklahoma NASA EPSCoR $35,997 Title: Oxidation Resistant UHTCs for Reentry Environments Duration: 1/26/2015-10/16/2015; PI: P. Sarin 11 Technology and Business Development Program (TBDP) $20,000 Title: PGM Recovery from Used Metal-foil Auto Catalysts Duration: 7/1/2015-6/30/2016; PI: P. Sarin

5 Final amount being negotiated


6

12 Technology and Business Development Program (TBDP) $5,000 Title: Novel Solution for “Produced Water” Disposal Duration: 7/1/2015-6/30/2016; PI: P. Sarin 13 Brookhaven National Laboratory $400 Title: In Situ Synchrotron studies of Phase Transitions, Thermal Expansion,

Chemical Reactions and Phase Equilibria in Ceramics

Duration: 8/12/2013 – 8/13/2013; PI: P. Sarin Purpose: Travel Grant for First-Experiments Workshop at NSLS-II

14 Oklahoma NASA Space Grant Consortium/NASA EPSCoR $1,688 Title: Oxidation Resistant, Light Weight UHTCs for Reentry Environments Duration: 9/22/2014-12/19/2014; PI: P. Sarin

Approved Proposals for Experiment Time 1 National Synchrotron Light Source II, Brookhaven National Laboratory 12 days

Title: Electric Field Induced Phase Transformations far from Equilibrium in Ceramics Measured in Real Time

Duration: 9/1/2016 - 8/31/2018; PI – R. Raj, Co-PI: P. Sarin 2 Advanced Photon Source, Argonne National Laboratory 1 days

Title: Analysis of compositional ordering in dolomite [CaMg(CO3)2] Duration: 01/04/2018 - 5/31/2018; PI: G. Lukoczki Co-PI: P. Sarin 3 NIST Center for Neutron Research (NCNR) 3 days

Title: Analysis of positional ordering in dolomite [CaMg(CO3)2] Duration: 01/04/2018 - 5/31/2018; PI: G. Lukoczki Co-PI: P. Sarin 4 Advanced Photon Source, Argonne National Laboratory 1 days Title: Effect of Zirconium Doping on Structural and Thermo-physical

Properties of DyNbO4

Duration: 1/9/2016 - 12/31/2016; PI: D. A. Lowry Co-PI: P. Sarin 5 National Synchrotron Light Source II, Brookhaven National Laboratory 12 days

Title: In-situ, High Temperature Oxidation Studies of HfB2 Composites Duration: 9/1/2014 - 8/30/2016; PI: P. Sarin 6 Advanced Photon Source, Argonne National Laboratory 4 days

Title: Oxidation Resistant UHTCs for Reentry Environments Duration: 10/9/2015 - 10/13/2015; PI: P. Sarin


7

Publications (35 Journal Articles, 17 Conference Proceedings, 1 Book, 163 Invited and Contributed Presentations/ Posters)

• h-index: 16; Total citations: 1214 (For 42 archival articles based on Scopus as of December 22nd, 2018)

• h-index: 19; i10-index: 30; Total citations: 1709 (For all publications based on Google Scholar as of December 22nd, 2018)

Journal Publications 1. “On the Synchronicity of Flash Sintering with Phase Transformation,” B. Yoon, D. Yadav, S.

Ghose, P. Sarin, and R. Raj, Journal of the American Ceramic Society, 2018 (accepted) 2. “First-principles Study of Mechanical and Magnetic Properties of Transition Metal (M)

Nitrides in the Cubic M4N structure,” V. Adhikari, Z. T. Y. Liu, N. J. Szymanski, I. Khatri, D. Gall, P. Sarin and S. V. Khare, Journal of Physics and Chemistry of Solids, Vol. 120, 197-206 (2018). DOI: 10.1016/j.jpcs.2018.04.043

3. “Universal Link of Magnetic Exchange and Structural Behavior Under Pressure in Chromium Spinels,” I. Efthimiopoulos, I. Khatri, Z. T. Y. Liu, S. V. Khare, P. Sarin, V. Tsurkan, A. Loidl, D. Zhang, and Y. Wang, Physical Review B, Vol. 97, 184435, (2018). DOI: 10.1103/PhysRevB.97.184435

4. “Electronic and Optical Properties of Vanadium Oxides from First Principles,” N. J. Szymanski, Z. T. Y. Liu, T. Alderson, N. J. Podraza, P. Sarin, and S. V. Khare, Computational Materials Science, Vol. 146, 310 -318 (2018). DOI: 10.1016/j.commatsci.2018.01.048

5. “Measurement of O and Ti Atom Displacements in TiO2 During Flash Sintering Experiments,” B. Yoon, D. Yadav, R. Raj, S. Ghose, P. Sarin, and D. Shoemaker, Journal of the American Ceramic Society, 2017;00:1–7. DOI: 10.1111/jace.15375

6. “Transparency Enhancement for SrVO3 by SrTiO3 Mixing: A First-Principles Study,” Z. T. Y. Liu, N. J. Podraza, S. V. Khare and P. Sarin, Computational Materials Science, Vol. 144, 139 - 146 (2018). DOI: 10.1016/J.COMMATSCI.2017.12.020

7. "Pressure-induced Phase Transitions in the CdCr2Se4 Spinel," I. Efthimiopoulos, Z. T. Y. Liu, M. Kucway, S. V. Khare, P. Sarin, V. Tsurkan, A. Loidl and Y. Wang, Physical Review B, Vol. 94, 174106 (2016). DOI: 10.1103/PhysRevB.94.174106

8. “First-principles Phase Diagram Calculations for the Carbonate Quasibinary Systems CaCO3-ZnCO3, CdCO3-ZnCO3, CaCO3-CdCO3 and MgCO3-ZnCO3,” Z. T. Y. Liu, B. P. Burton, S. V. Khare and P. Sarin, Chemical Geology, Vol. 443, 137-145 (2016). DOI: 10.1016/j.chemgeo.2016.09.024


8

9. “Structural Transition in the Magnetoelectric ZnCr2Se4 Spinel Under Pressure,” I. Efthimiopoulos, Z. T. Y. Liu, S. V. Khare, P. Sarin, V. Tsurkan, A. Loidl, D. Popov, and Y. Wang, Physical Review B, Vol. 93, 174103, (2016). DOI: 10.1103/PhysRevB.93.174103

10. “Pressure-induced Transition in the Multiferroic CoCr2O4 Spinel,” I. Efthimiopoulos, Z. T. Y. Liu, S. V. Khare, P. Sarin, T. Lochbiler, V. Tsurkan, A. Loidl, D. Popov, and Y. Wang, Physical Review B, Vol. 92, 064108, (2015). DOI: 10.1103/PhysRevB.92.064108

11. “Thermal Expansion of HfO2 and ZrO2,” R. P. Haggerty, P. Sarin, Z. D. Apostolov, P. Driemeyer, and W. M. Kriven, Journal of the American Ceramic Society, Vol. 97 [7], 2213 – 2222 (2014). DOI: 10.1111/jace.12975

12. “High Temperature Properties and Ferroelastic Phase Transitions in Rare-Earth Niobates,” P. Sarin, R. W. Hughes, D. R. Lowry, Z. D. Apostolov, and W. M. Kriven, Journal of the American Ceramic Society, Vol. 97 [10], 3307 – 3319 (2014). DOI: 10.1111/jace.13095

13. “Thermal Expansion of Ln6WO12 (Ln = Y, Ho, Er, Yb) and Ln2WO6 (Ln= Gd, Dy, Ho) - an In Situ Synchrotron X-Ray Diffraction Study,” Z. D. Apostolov, P. Sarin, R. W. Hughes, and W. M. Kriven, Journal of the American Ceramic Society, Vol. 97 [8], 2496 – 2505 (2014). DOI: 10.1111/jace.12962

14. “The Tetragonal-Monoclinic, Ferroelastic Transformation in Yttrium Tantalate and Effect of Zirconia Alloying,” S. Shian, P. Sarin, M. Gurak, M. Baram, W. M. Kriven, and D. R. Clarke, Acta Materialia, Vol. 69, 196 – 202 (2014). DOI: 10.1016/j.actamat.2014.01.054

15. “In-situ Synchrotron X-ray Diffraction Study of the Rhombohedral-to-HT-Cubic Phase Transformation in Ln6WO12 (Ln = Y, Ho, Er, Yb),” Z. D. Apostolov, P. Sarin, R. W. Hughes, and W. M. Kriven, Journal of the American Ceramic Society, Vol. 97 [4], 1256 – 1263 (2014). DOI: 10.1111/jace.12744

16. “CTEAS: A GUI Based Program to Determine Thermal Expansion from HTXRD,” Z.A. Jones, P. Sarin, R.P. Haggerty, and W.M. Kriven, Journal of Applied Crystallography, Vol. 46, 550 – 553 (2013). DOI:10.1107/S0021889813002938

17. “In-situ Synchrotron X-ray Diffraction Study of the Cubic to Rhombohedral Phase Transformation in Ln6WO12 (Ln = Y, Ho, Er, Yb),” Z. D. Apostolov, P. Sarin, R. P. Haggerty, and W. M. Kriven, Journal of the American Ceramic Society, Vol. 96 [3], 987 – 994 (2013). DOI: 10.1111/jace.12119

18. “Porous Biphasic Calcium Phosphate Scaffolds Using Cuttlefish Bone,” P. Sarin, S-J. Lee, Z. D. Apostolov and W. M. Kriven, Journal of the American Ceramic Society, Vol. 94 [8], 2362 – 2340 (2011). DOI: 10.1111/j.1551-2916.2011.04404.x

19. “In-situ Studies of Oxidation of ZrB2 and ZrB2-SiC Composites at High Temperatures,” P. Sarin, P. Driemeyer, R. P. Haggerty, D.-K. Kim, J. L. Bell, and W. M. Kriven, Journal of the European Ceramic Society, Vol. 30, 2375 – 2386 (2010). DOI:10.1016/j.jeurceramsoc.2010.03.009

20. “Powder Diffraction by Fixed Incident Angle Reflection Using a Curved Position Sensitive Detector,” R. P. Haggerty, P. Sarin, J-F. Bérar, Z.D. Apostolov and W. M. Kriven, Journal of Applied Crystallography, Vol. 43, 560 – 569 (2010). DOI:10.1107/S0021889810006400


9

21. “A Curved Image Plate Detector System for High Resolution Synchrotron X-Ray Diffraction,” P. Sarin, R. P. Haggerty, W. Yoon, M. Knapp, A. Berghaeuser, P. Zschack, E. Karapetrova, N. Yang and W. M. Kriven, Journal of Synchrotron Radiation, Vol. 16 [2], 273 – 282 (2009). DOI:10.1107/S0909049509001265

22. “X-ray Pair Distribution Function Analysis of a metakaolin-based, KAlSi2O6•5.5H2O inorganic polymer (geopolymer),” J. L. Bell, P. Sarin, P. E. Driemeyer, R. P. Haggerty, P. J. Chupas, and W. M. Kriven, Journal of Materials Chemistry, Vol. 18, 5974 – 5981 (2008). DOI: 10.1039/b808157c

23. “Atomic Structure of Metakaolin Based Cesium Aluminosilicate Geopolymer: A Pair Distribution Function Study,” J. L. Bell, P. Sarin, J. L. Provis, R. P. Haggerty, P. E. Driemeyer, P. J. Chupas, J. S. J. van Deventer, and W. M. Kriven, Chemistry of Materials, Vol. 20 [14], 4768 – 4776 (2008). DOI: 10.1021/cm703369s

24. “Effect of Transition-metal-ion Doping on High Temperature Thermal Expansion of 3:2 Mullite – An In-situ, High Temperature, Synchrotron Diffraction Study,” P. Sarin, W. Yoon, N.C. Bhorkar, C. Chiretescu, and W. M. Kriven, Journal of the European Ceramic Society, Vol. 28 [2], 353 – 365 (2008). DOI:10.1016/j.jeurceramsoc.2007.03.002

25. “Growth of Textured Mullite Fibers Using a Quadrupole Lamp Furnace,” W. Yoon, P. Sarin and W. M. Kriven, Journal of the European Ceramic Society, Vol. 28 [2], 455 – 463 (2008). DOI: 10.1016/j.jeurceramsoc.2007.03.019

26. “Phase Transformations in the High Temperature Form of Pure and TiO2-stabilized Ta2O5,” G. L. Brennecka, D. A. Payne, P. Sarin, J. -M. Zuo, W. M. Kriven and H. Hellwig, Journal of the American Ceramic Society, Vol. 90 [9], 2947 – 2953 (2007). DOI: 10.1111/j.1551-2916.2007.01790.x

27. “Quadrupole Lamp Furnace for High Temperature (up to 2050K) Synchrotron Powder X-Ray Diffraction Studies in Air,” P. Sarin, W. Yoon, K. Jurkschat, P. Zschack and W. M. Kriven, Review of Scientific Instruments, 77 [9], 093906 (2006). DOI: 10.1063/1.2349600

28. “The Effect of Chloride and Orthophosphate on the Release of Iron from a Drinking Water Distribution System Cast Iron Pipe,” D. A. Lytle, P. Sarin and V. L. Snoeyink, Journal of Water Supply: Research and Technology-AQUA, 54 [5], 267, 2005.

29. “Iron Corrosion Scales: Model for Scale Growth, Iron Release and Colored Water Formation,” P. Sarin, V. L. Snoeyink, D. A. Lytle and W. M. Kriven, Journal of Environmental Engineering-ASCE Vol. 130, No. 4, pp 364 – 373, 2004. DOI: 10.1061/(ASCE)0733-9372(2004)130:4(364)

30. “Iron Release From Iron Pipes in Drinking Water Distribution Systems: Effect of Dissolved Oxygen,” P. Sarin, V. L. Snoeyink, J. Bebee, K. K. Jim, M. A. Beckett, W. M. Kriven and J. A. Clement, Water Research Vol. 38, No.5, pp 1259 – 1269, 2004. DOI: 10.1016/j.watres.2003.11.022

31. “Iron Release from Corroded Unlined Cast Iron Pipe,” P. Sarin, V. L. Snoeyink, J. A. Clement and W. M. Kriven, Journal of American Water Works Association, Vol. 95, No. 11, pp 85 – 96, 2003.

32. “Aluminum Containing Scales in Water Distribution Systems – Prevalence and Composition” V. L. Snoeyink, M. A. Schock, P. Sarin, L. Wang, A. S-C. Chen and S. M.


10

Harmon, Journal of Water Supply: Research and Technology – AQUA, Vol. 52, pp 455 – 474, November 2003.

33. “Physico-chemical Characteristics of Corrosion Scales Formed on Iron Pipes,” P. Sarin, V. L. Snoeyink, J. Bebee, W. M. Kriven and J. A. Clement, Water Research, Vol. 35, No.12, pp 2961 – 2969, 2001.

34. “Mechanism of Release of Iron from Corroded Iron/Steel Pipes in Water Distribution Systems,” P. Sarin, J. Bebee, M. A. Beckett, K. K. Jim, D. A. Lytle, J. A. Clement, W. M. Kriven and V. L. Snoeyink, Corrosion & Materials, Vol. 26, No. 3, June 2001.

35. “Microwave Sintering Studies of ZrO2-CeO2 Ceramics,” P. D. Ramesh, P. Sarin, S. Jeevan and K. J. Rao, Journal of Materials Synthesis and Processing, Vol. 4, No. 3, pp 163 – 173, May 1996.

Conference Proceedings 1. "Phase Transformations in Fergusonite Type Rare Earth Tantalates," R.W. Hughes, Z.D.

Apostolov, P. Sarin, and W.M. Kriven, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Edited by Chen L.-Q.,Militzer M.,Botton G.,Howe J.,Sinclair C.,Zurob, Published by the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, pp 337-342 (2015).

2. "Characterization of Tetragonal-Monoclinic, Ferroelastic Transformation and Domain Boundaries in Zirconia-Alloyed Yttrium Tantalate," M. Baram, S. Shian, M. Gurak, J. Feng, P. Sarin, W. M. Kriven and D. R. Clarke, Microscopy and Microanalysis, 20 [Supplement S3] 1930-1931 (2014).

3. “Formation of Nanocrystalline Zeolites in Geopolymer Gels,” J. L. Bell, P. Sarin and W. M. Kriven, Microscopy and Microanalysis ‘06, Vol. 12, Supplement 2, pp 738 – 739, 2006.

4. “Rapid In-situ Ultra-High Temperature Investigations of Ceramics Using Synchrotron X-Ray Diffraction,” P. Sarin, R. P. Haggerty, W. Yoon, P. Zschack, M. Knapp and W. M. Kriven, Ceramic Engineering and Science Proceedings, Vol. 27 [2], 313 – 324 (2006).

5. “Phase Transformations in Rare Earth Niobates,” W. M. Kriven, P. Sarin, and L. F. Siah, Solid-Solid Phase Transformations in Inorganic Materials 2005. Edited by James Howe, David Laughlin, Jong Lee, Ulrich Dahmen, William Soffa. Published by the TMS Society, 1015 – 1022 (2005).

6. “High Temperature Tensile Testing Method for Monofilament Ceramic Fibers,” B. M. Yee, P. Sarin and W. M. Kriven, Ceramic Engineering and Science Proceedings. Edited by E. Lara-Curzio, D.-M. Zhu and W. M. Kriven, Vol. 26 [2], 67 – 74 (2005).

7. “Novel Alkali-Bonded Ceramic Filtration Membranes,” S. Mallicoat, P. Sarin and W. M. Kriven, Ceramic Engineering and Science Proceedings. Edited by M. E. Brito, P. Filip, C. Lewinsohn, A. Sayir, M. Opeka, W. M. Mullins, D.-M. Zhu and W. M. Kriven, Vol. 26 [8], 37 – 44 (2005).


11

8. “Corrosion Control Optimization Using Lead Pipe Loops,” A. Atassi, C. Feizoulof, B. Melcher, V. L. Snoeyink and P. Sarin, Proceedings AWWA Water Quality Technology Conference 2004.

9. “In-situ High Temperature Phase Transformations in Rare Earth Niobates,” K. Jurkschat, P. Sarin, L. F. Siah and W. M. Kriven, Advances in X-Ray Analysis Vol. 47, pp 357 – 362, 2004.

10. “The Effect of Chloride and Orthophosphate on the Release of Iron from a Drinking Water Distribution System Cast Iron Pipe,” D.A. Lytle, P. Sarin and V. L. Snoeyink, Proceedings AWWA Water Quality Technology Conference 2003.

11. “Iron Release and Colored Water Formation from Iron Scales,” V. L. Snoeyink, P. Sarin and D. A. Lytle, Proceedings AWWA Annual Conference and Exposition 2003.

12. “Release of Iron from Corroded Iron/Steel Pipes in Water Distribution Systems - Effect of Stagnation Time,” P. Sarin, J. Bebee, M. A. Beckett, K. K. Jim, D. A. Lytle, J. A. Clement, W. M. Kriven and V. L. Snoeyink, Proceedings International Distribution Research Symposium, June 2000.

13. “Mechanism of Release of Iron from Corroded Iron/Steel Pipes in Water Distribution Systems,” P. Sarin, J. Bebee, M. A. Beckett, K. K. Jim, D.A. Lytle, J. A. Clement, W. M. Kriven and V. L. Snoeyink, Proceedings AWWA Annual Conference and Exposition 2000.

14. “Systematic study of corrosion scales and their effect on release of iron particles in drinking water,” P. Sarin, K. Jim, D. Lytle, M. A. Beckett, W. M. Kriven, V. L. Snoeyink, and J. A. Clement, Proceedings AWWA Conference on Particle Measurement and Characterization in Drinking Water Treatment, March 1999.

15. “A Pipe Loop System for Evaluating Iron Uptake in Distribution Systems,” M. A. Beckett, V. L. Snoeyink, K. K. Jim, P. Sarin, D. A. Lytle, W. Kriven and J. A. Clement, Proceedings AWWA Water Quality Technology Conference 1998.

16. “Analysis and Interpretation of the Physical, Chemical and Biological Characteristics of Distribution System Pipe Scales,” J. A. Clement, V. Snoeyink, A. Camper, A. Sandvig, P. Sarin and W. M. Kriven, Proceedings AWWA Water Quality Technology Conference 1998.

17. “Characterization of Tubercles in Cast Iron Water Distribution Pipes Using Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS),” P. Sarin, W. M. Kriven and V. L. Snoeyink, Microscopy and Microanalysis ‘97, Vol. 3, Supplement 2, pp 787 – 788, 1997.

Book 1. “Development of Red Water Control Strategies,” J. A. Clement, M. E. Hayes, P. Sarin, W.

M. Kriven, J. Bebee, K. K. Jim, M. A. Beckett, V. L. Snoeyink, G. J. Kirmeyer, and G. Pierson, AWWARF, Denver CO, 2002 (ISBN 158321187X).


12

Intellectual Property/Patent Applications 1. US Patent 62643230 (Pending) “PGM Recovery from Scrapped Autocatalysts by Mechano-

Chemical Extraction Process,” by P. Sarin and D. K. Nichols (DR2 Recycling)

2. OSU Invention Disclosure Number 2018.14 titled “Zero Liquid Discharge Evaporation Unit for Solar Desalinization (ZEUS) of Produced Water” by Khaled A. Sallam, P. Sarin and Do Young Kim

3. OSU Invention Disclosure Number 2017.66 titled “Mechano-chemical recovery of Platinum Group Metals (PGMs) from Metal-Foil Supported Auto Catalysts” by P. Sarin and D. K. Nichols (DR2 Recycling)

4. OSU Invention Disclosure Number 2015.45 titled “PGM recovery from used metal-foil auto catalysts” by P. Sarin and D. K. Nichols (DR2 Recycling)

5. OSU Invention Disclosure Number 2015.44 titled “Novel solution for “produced water” disposal” by P. Sarin.

6. OSU Invention Disclosure Number 2015.41 titled “Active energy absorbing material system for protection from traumatic brain injury” by R. P. Singh and P. Sarin.

Presentations and Posters6 (163 Total; Invited 63; Contributed 100)

Invited (primary author) 1. “Low-cost Ceramic Membranes for Ultra/Nanofiltration of Produced Water,” P. Sarin* and

K. A. Sallam, Winter Meeting of the Water Research Advisory Board FY-2019, Stillwater, Oklahoma, December 13th, 2018.

2. “A High Temperature Perspective of Materials Through In-situ Experiments,” P. Sarin*, Texas Materials Institute Seminar, University of Texas at Austin, Austin, Texas, April 11th, 2018.

3. “Understanding High Temperature Properties of Materials through In-situ Experiments,” P. Sarin*, Graduate Seminar, Department of Chemistry and Biochemistry, University of Tulsa, Tulsa, Oklahoma, March 29th, 2018.

4. “High Temperature Ferroelastic Phase Transformations in Rare-Earth Orthoniobates,” P. Sarin*, Department Colloquium, Boone Pickens Scool of Geology, Oklahoma State University, Stillwater, Oklahoma, February 23rd, 2018.

5. “A High Temperature Perspective of Materials,” P. Sarin*, Materials Science & Engineering Seminar, Department of Mechanical & Aerospace Engineering, West Virginia University, Morgantown, West Virginia, November 10th, 2017.

6. “Ferroelastic Phase Transformation in Rare-earth Orthoniobates,” P. Sarin*, Physics Colloquium, Department of Physics & Engineering Physics, The University of Tulsa, Tulsa, Oklahoma, November 3rd, 2017.

6 Presenter indicated by asterisk


13

7. “Controlling Ferroelastic Phase Transformation in Rare-earth Ortho-niobates,” P. Sarin*, and D. R. Lowry, Materials Science & Technology 2017, Pittsburgh, Pennsylvania, October 8th – 12th, 2017.

8. “Iron Release from Corroded Iron/Steel Pipes in Drinking Water Distribution Systems,” P. Sarin* and V.L. Snoeyink, Corrosion Conference and Expo 2017, New Orleans, Louisiana, March 26th – 30th, 2017.

9. “Phase Transformation and Thermal Expansion Properties of Rare-earth Monosilicates,” P. Sarin*, D.R. Lowry, Z.D. Apostolov and W.M. Kriven, Materials Science & Technology 2015, Columbus, Ohio, October 4th – 8th, 2015.

10. “Oxidation Studies of ZrB2 and ZrB2-SiC Composites Using HTXRD,” P. Sarin*, NASA Ames Research Center, San Jose, California, December 10th, 2014.

11. “Understanding Ceramic Materials at High Temperatures,” P. Sarin*, Physics Seminar, University of Tulsa, Tulsa, Oklahoma, November 14th, 2014.

12. “High Temperature Ferroelastic Phase Transition in Rare-earth Niobates (LnNbO4, where Ln = La, Dy and Y),” P. Sarin*, R.W. Hughes, D.R. Lowry, Z.D. Apostolov and W.M. Kriven, Materials Science & Technology 2014, Pittsburgh, Pennsylvania, October 12th – 16th, 2014.

13. “In-situ Synchrotron Studies of Phase Transitions, Thermal Expansion, Chemical Reactions and Phase Equilibria in Ceramics,” P. Sarin* and W.M. Kriven, NSLS-II First-Experiments Workshop, Brookhaven National Laboratory, Upton, New York, August 12th – 13th, 2013.

14. “Ceramics – A High Temperature Perspective,” P. Sarin*, Physics and Astronomy Colloquium, University of Toledo, Toledo, Ohio, April 11th, 2013.

15. “CTE Analysis Suite (CTEAS): A GUI Based Program to Calculate CTE of Crystalline Materials from HTXRD,” P. Sarin*, Z.A. Jones, and W.M. Kriven, Workshop on the Design of Ceramic-Fiber Based Composites for Service Above 1400°C, The National Hypersonics Science Center for Materials and Structures, Boulder, Colorado, June 9th – 16th, 2012.

16. “Ferroelastic Phase Transformations in Rare Earth Niobates,” P. Sarin*, Hard Materials Seminar, Department of Materials Science and Engineering, University of Illinois at Urbana-Champaign, Urbana, Illinois, October 13th, 2011.

17. “In-situ HTXRD Studies of Oxidation of ZrB2 and ZrB2-SiC Composites,” P. Sarin*, P. Driemeyer, R. P. Haggerty, D.-K. Kim, J. L. Bell, and W. M. Kriven, CIMTEC 2010 - 12th International Conference on Modern Materials and Technologies, Montecatini Terme, Tuscany, Italy, June 6th – June 11th, 2010.

18. “X-ray Studies of Phase Transformations in Tantalum Pentoxide,” P. Sarin*, R.P. Haggerty, J.L. Bell, Z.D. Apostolov and W.M. Kriven, Materials Science and Technology 2009, Pittsburgh, Pennsylvania, October 25th – October 29th, 2009.

19. “In-situ Studies of Oxidation of ZrB2 and ZrB2-SiC Composites at High Temperatures,” P. Sarin*, P. Driemeyer, R. P. Haggerty, D.-K. Kim, J. L. Bell, and W. M. Kriven, Workshop on Aerospace Materials for Extreme Environments, Clayton, Missouri, August 3rd – August 5th, 2009.


14

20. “Rapid High Temperature XRD Investigations of Oxide Ceramics,” P. Sarin*, J. L. Bell*, R. P. Haggerty, W. Yoon, P. Zschack, and W. M. Kriven, Advanced Photon Source User Science Seminar, Argonne National Laboratory, Argonne, Illinois, March 16th, 2007.

21. “High Temperature XRD Investigations of Ceramics In Air Using Synchrotron Radiation,” P. Sarin*, W. Yoon, R. P. Haggerty, P. Zschack, and W. M. Kriven, Advanced Photon Source User Science Seminar, Argonne National Laboratory, Argonne, Illinois, February 3rd, 2006.

22. “Quadrupole Lamp Furnace – An Excellent Tool for Conducting In-situ High Temperature X-ray Diffraction,” P. Sarin*, K. Jurkschat, W. Yoon, A. J. Randolph, and W. M. Kriven, Condensed Matter Physics Seminar, Brookhaven National Laboratory, Upton, New York, July 29th, 2004.

23. “Controlling Red Water and Iron Release,” P. Sarin, V. L. Snoeyink*, D. A. Lytle, 2nd IWA Leading-Edge Conference on Water and Wastewater Treatment Technologies – LET2004, Prague, Czech Republic, June 1st – 4th, 2004.

24. “Colored Water Formation in Old Iron/Steel Drinking Water Distribution Pipes,” P. Sarin*, Australian Water Quality Center (AWQC), Adelaide, South Australia, Australia, April 12th, 2001.

25. “Corrosion Scales – A Source of “Red Water” in Old Iron/Steel Drinking Water Distribution Pipes,” P. Sarin*, Commonwealth Scientific and Industrial Research Organization (CSIRO), Melbourne, Victoria, Australia, April 11th, 2001.

26. “Iron Release from Corrosion Scales in Old Iron/Steel Drinking Water Distribution Pipes,” P. Sarin*, V. L. Snoeyink, J. Bebee, M. A. Beckett, K. K. Jim, D. A. Lytle, W. M. Kriven and J. A. Clement, ONDEO Nalco Chemical Company, Naperville, Illinois, October 17th, 2000.

27. “A Conceptual Model for Iron Release from Corrosion Scales,” P. Sarin*, V. L. Snoeyink, J. Bebee, M. A. Beckett, K. K. Jim, D. A. Lytle, J. A. Clement and W. M. Kriven, US Environmental Protection Agency, Cincinnati, Ohio, August 17th, 2000.

28. “The Mechanism of Iron Release from Corrosion Scales in Iron/Steel Drinking Water Pipes,” P. Sarin*, J. Bebee, M. A. Beckett, K. K. Jim, J. A. Clement, W. M. Kriven and V. L. Snoeyink, US Environmental Protection Agency, Cincinnati, Ohio, September 13th, 1999.

Invited (others) 29. “Phase Transformations in Fergusonite type Rare Earth Tantalates,” R.W. Hughes*, Z.D.

Apostolov, P. Sarin, and W.M. Kriven, Materials Science & Technology 2014, Pittsburgh, Pennsylvania, October 12th – 16th, 2014.

30. “In situ Synchrotron Diffraction of the HfO2 Phase Transformation in Air to 1850 °C,” R.P. Haggerty, P. Sarin, Z.D. Apostolov, P.E. Driemeyer and W.M. Kriven*, Materials Science & Technology 2014, Pittsburgh, Pennsylvania, October 12th – 16th, 2014.


15

31. “On the Utility of Metastable Phases – An Example from Ln6WO12 (Ln = Y, Ho, Er, Yb),” Z.D. Apostolov*, P. Sarin, R.W. Hughes, and W.M. Kriven, Materials Science & Technology 2014, Pittsburgh, Pennsylvania, October 12th – 16th, 2014.

32. “Phase Transformations in Ceramics: the Present and the Future,” I. Reimanis*, W.M. Kriven and P. Sarin, Materials Science & Technology 2014, Pittsburgh, Pennsylvania, October 12th – 16th, 2014.

33. “Phase Transformation and Thermal Expansion of Crystalline Materials from High Temperature Powder X-ray Diffraction,” W.M. Kriven*, P. Sarin, R.P. Haggerty, and Z.D. Apostolov, National Synchrotron Light Source Seminar, Brookhaven National Laboratory, Upton, New York, June 22nd, 2012.

34. “Thermal Expansion of Crystalline Materials from High Temperature Powder X-ray Diffraction,” W.M. Kriven*, P. Sarin, R.P. Haggerty, and Z.D. Apostolov, Workshop on the Design of Ceramic-Fiber Based Composites for Service Above 1400°C, The National Hypersonics Science Center for Materials and Structures, Boulder, Colorado, June 9th – 16th, 2012.

35. “In-situ, High Temperature, Synchrotron Studies of Monoclinic to Tetragonal Phase Transformation in HfO2 and Ta2O5 doped HfO2 System,” W.M. Kriven*, R.P. Haggerty, P. Sarin, Z.D. Apostolov, and Z.A. Jones, Keynote Lecture, 7th International Conference on High Temperature Ceramic Matrix Composites (HT-CMC 7) Bayreuth, Germany, September 20th – 22nd, 2010.

36. “Atomic Structure and Microstructure of Geopolymer and Crystallized Geopolymer Ceramics,” W.M. Kriven*, J.L. Bell, P.E. Driemeyer, P. Sarin, R.P. Haggertty, and N. Xie, 12th International Ceramics Congress, Montecatini Terme, Tuscany, Italy, June 6th - 11th, 2010.

37. “Microstructure and Properties of Metakaolin-based Geopolymers,” W.M. Kriven*, J.L. Bell, P.E. Driemeyer, P. Sarin, R.P. Haggerty, M. Gordon, S. Mallicoat, P. Duxson, N. Xie, D.R. Lowry, and E. Rill, 32nd International Conference on Cement Microscopy, New Orleans, Louisiana, March 28th - April 1st, 2010.

38. “In situ Synchrotron Studies of Ceramics to 2000°C in Air,” W.M. Kriven*, P. Sarin, R.P. Haggerty, and Z.D. Apostolov, National Synchrotron Light Source, Brookhaven National Laboratory, Upton, New York, November 10th, 2009.

39. “In-situ, High Temperature, Synchrotron Studies of Phase Transformations in Oxide Ceramics,” W.M. Kriven*, P. Sarin, R.P. Haggerty and Z.D. Apostolov, Materials Science and Technology 2009, Pittsburgh, Pennsylvania, October 25th – October 29th, 2009.

40. “In-situ, High Temperature, Synchrotron Studies of Monoclinic to Tetragonal Phase Transformation in HfO2,” R.P. Haggerty, P. Sarin, Z.D. Apostolov and W.M. Kriven*, Composites at Lake Louise, Canada, October 25th – October 30th, 2009.

41. "In-situ, High Temperature, Synchrotron Studies of Monoclinic to Tetragonal Phase Transformation in HfO2," W.M. Kriven*, R.P. Haggerty, P. Sarin and Z.D. Apostolov, Keynote Lecture, The 8th European Symposium on Martensitic Transformations, Prague, Czech Republic, September 7th - September 11th, 2009.


16

42. “Microstructure and Short Range Order in Aluminosilicate Geopolymers,” J. L. Bell, P. Sarin and W. M. Kriven*, 33rd International Cocoa Beach Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, Florida, January 18th – 23rd, 2009.

43. “Ceramics Without Sintering: Inorganic Polymers,” W.M. Kriven*, J.L. Bell, P. Sarin, and P.E. Driemeyer, Invited Keynote Lecture at FORUM 2008 of the World Academy of Ceramics, Siena, Italy, July 5th – 8th, 2008.

44. “In Situ Synchrotron Studies of Oxide Ceramics to 2000°C in Air, “ W.M. Kriven*, P. Sarin, J.L. Bell, R.P. Haggerty, and P.E. Driemeyer, Department of Mechanical Engineering, Texas A&M University, College Station, Texas, April 24th, 2008.

45. “Pair Distribution Function Analysis of Metakaolin-Based Geopolymers,” J. L. Bell*, P. Sarin, R. P. Haggerty, P. E. Driemeyer and W. M. Kriven, National Synchrotron Light Source Seminar, Brookhaven National Laboratory, Upton, New York, March 7th, 2008.

46. “In-situ, in Air, High Temperature (2000°C) Studies of Oxide Ceramics,” W. M. Kriven*, P. Sarin, R. Haggerty, J. Bell, P. E. Driemeyer. Department of Anorganische Chemie, the University of Bonn, Bonn, Germany, February 21st 2008.

47. “Recent Advances in Thermally-Induced Evolution of Geopolymers into Ceramics,” W. M. Kriven*, J. L. Bell, P. Sarin, R. P. Haggerty, and P. E. Driemeyer, 32nd International Cocoa Beach Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, Florida, January 27th – February 1st 2008.

48. “Ultra High Temperature Furnaces for In-situ Synchrotron Studies,” W. M. Kriven*, P. Sarin, R. Haggerty, J. L. Bell, and P. E. Driemeyer, NSLS Workshop on Future Directions for Synchrotron Research at the NSLS II, Brookhaven National Laboratory, Upton, New York, January 8th, 2008.

49. “In-situ, High Temperature Studies of Phase Transformations in Ceramics,” W. M. Kriven*, P. Sarin and R. P. Haggerty, Composites at Lake Louise, Canada, October 28th – November 2nd, 2007.

50. “In-situ Studies of the Thermal Conversion of Geopolymers into Ceramics,” J. L. Bell, P. Sarin, R. P. Haggerty, P. E. Driemeyer and W. M. Kriven*, Composites at Lake Louise, Canada, October 28th – November 2nd, 2007.

51. “Geopolymers and Geopolymer Concretes,” W. M. Kriven*, J. L. Bell, P. Sarin, R. P. Haggerty and P. Driemeyer. Tyndall Air Force Base, Panama City, Florida, August 7th, 2007.

52. “From Geopolymers to Ceramics,” W. M. Kriven*, J. L. Bell and P. Sarin. Keynote lecture, International Conference and Exhibition Materials and Austceram, Sydney, Australia, July 4th – 6th, 2007.

53. “From Geopolymers to Ceramics,” W. M. Kriven*, J. L. Bell and P. Sarin, Keynote lecture at 3rd International Conference on Alkali Activated Materials – Research, Production and Utilization, Prague, Czeck Republic, June 21st – 22nd, 2007.

54. “Crystallographic and Processing Studies of Calcium Phosphate Templates,” W. M. Kriven*, D. Jian, D. K. Kim, D. H. Lim, P. Sarin, N. Smith and M. Stewart. Presented at


17

the Annual Meeting of the European Ceramic Society, Berlin, Germany, June 17th –21st, 2007.

55. “The Complex Structure of Geopolymers,” W. M. Kriven*, J. L. Bell and P. Sarin, 7th Understanding Complex Systems Conference, University of Illinois at Urbana-Champaign, Urbana, Illinois, May 14th – 17th, 2007.

56. “Rapid, In-situ, High Temperature Synchrotron Studies of Phase Transformations in Ceramics,” W. M. Kriven*, P. Sarin and R. P. Haggerty, Advanced Photon Source Users Workshop, Argonne National Laboratory, Argonne, Illinois, May 7th – 12th, 2007.

57. “Crystallization of Leucite and Pollucite from Geopolymer Gels,” W. M, Kriven*, J. L. Bell, M. Gordon, and P. Sarin, 31st International Cocoa Beach Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, Florida, January 21st – 26th, 2007.

58. “In-situ, High Temperature Measurement of Phase Transformations and Thermal Expansion Coefficients in Ceramics,” W. M. Kriven* and P. Sarin, International Workshop on Advanced Ceramics, Nagoya, Japan, October 30th – November 3rd, 2006.

59. “In-situ, High-temperature Synchrotron Powder Diffraction Studies of Oxide Systems In Air Using A Thermal-image Furnace,” W. M. Kriven* and P. Sarin, 64th Pittsburgh Diffraction Conference, Duquesne University, Pittsburgh, Pennsylvania, October 26th – 28th, 2006.

60. “Phase Transformations and Thermal Expansion Coefficients in Oxide Ceramics, Measured In-situ, in Air, to 2000°C,” W. M. Kriven* and P. Sarin, CIMTEC 2006, International Conference on Modern Materials & Technologies, Acireale, Sicily, Italy, June 4th – 9th, 2006.

61. “Architecture of Calcium Phosphate Templates for Bone, Ligament and Cartilage Growth,” W. M. Kriven*, D. K. Kim, P. Sarin, N. L. Smith, S. L. Lee and D. Yoon, 6th Understanding Complex Systems Conference, University of Illinois at Urbana-Champaign, Urbana, Illinois, May 15th –18th, 2006.

62. “In-situ, in Air, High Temperature Study of Phase Transformations in Ceramics,” W. M. Kriven*, P. Sarin, K. Jurkschat and L. F. Siah, International Conference on Solid-Solid Phase Transformations in Inorganic Materials, Phoenix, Arizona, May 29th – June 3rd, 2005.

63. “In-situ High Temperature Study of Phase Transformations in Ceramics,” W. M. Kriven*, L. F. Siah, P. Sarin and K. Jurkschat, Austceram 2004, Melbourne, Victoria, Australia, November 29th – December 1st, 2004.

Contributed 64. “Exposure of Undergraduate Research Students to Entrepreneurial Activities – Leveraging

NSF Innovation Corps and REU programs,” M. Mwarumba*, A. Slack, K. Bartosik, R. Gajan, P. Sarin, and R. Vaidyanathan, International Materials Education Symposium (IMES 2019), Cambridge, United Kingdom, April 11th – 22th, 2019.


18

65. “Development of Low-cost Ceramic Membranes for Ultra/Nanofiltration of Produced Water,” Y. Xu*, D. R. Lowry, K. A. Sallam, and P. Sarin, Oklahoma Governor’s Water Conference & Research Symposium, Midwest City, Oklahoma, December 5th – 6th, 2018.

66. “Novel Clay-Based Absorbents for Ammonia Sequestration from Poultry Litter,” C. T. Brockman*, D. R. Lowry, and P. Sarin, 2018 Research Experiences for Undergraduates Symposium, Alexandria, Virginia, October 28th – 29th, 2018.

67. “Influence of W and Mo Substitution on Phase Stability and Transformation Properties of CeNbO4,” D. R. Lowry*, T. Thomas, E. M. Sabolsky, and P. Sarin, Materials Science & Technology 2018, Columbus, Ohio, October 14th – 18th, 2018.

68. “In-Situ High Temperature X-Ray Diffraction up to 1500°C in Air: Lab Source XRD and Quadrupole Lamp Furnace,” D. R. Lowry*, G. Dillard, and P. Sarin, Materials Science & Technology 2018, Columbus, Ohio, October 14th – 18th, 2018.

69. “Effect of A-Site Aliovalent Doping on the Thermo-Physical Properties of RENbO4 Materials,” D. R. Lowry* and P. Sarin, Materials Science & Technology 2018, Columbus, Ohio, October 14th – 18th, 2018.

70. “The Effect of Mg2+ Doping on the Phase Transformation and Thermal Expansion Properties of DyNbO4,” D. R. Lowry* and P. Sarin, Materials Science & Technology 2018, Columbus, Ohio, October 14th – 18th, 2018.

71. “Tailoring the RENbO4 Phase Transformation Through Zr4+ Co-Substitution,” D. R. Lowry* and P. Sarin, Materials Science & Technology 2018, Columbus, Ohio, October 14th – 18th, 2018.

72. “Application of X-ray Diffraction Methods to Understanding the Dolomite Diagenesis,” J. M. Gregg *, P. Sarin, and G. Lukoczki, 20th International Sedimentology Congress (ISC), Québec City, Québec, Canada, August 13th – 17th, 2018.

73. “Application of the Rietveld Method for the Study of Dolomite Diagenesis,” G. Lukoczki*, P. Sarin, and J. M. Gregg, 20th International Sedimentology Congress (ISC), Québec City, Québec, Canada, August 13th – 17th, 2018.

74. “In-situ High Temperature X-ray Studies for Development of Hypersonic Materials,” P. Sarin, D. R. Lowry, R. Vaidyanathan*, and S. Ghose, U.S. Air Force Science & Technology 2030 Visioning Workshop, University of Utah, Salt Lake City, Utah, July 10th – 11th, 2018.

75. “From Produced Water to Fresh Water: Engineer’s Perspective,” K. A. Sallam*, P. Sarin, and D. Y. Kim, Oklahoma NSF EPSCoR 2018 Annual State Conference, Oklahoma City, Oklahoma, April 24th, 2018.

76. “Development of Inexpensive Ceramic Membranes Using Geopolymers,” Y. Xu*, D. R. Lowry, S. Dangwal, S-J. Kim, K. A. Sallam, and P. Sarin, 63rd Annual Oklahoma ACS Pentasectional Meeting, Tulsa, Oklahoma, April 21st, 2018.

77. “High Temperature X-ray Diffraction up to 1500°C in Air Using a Quadrupole Lamp Furnace on a Laboratory Diffractometer,” D. R. Lowry*, G. Dillard, F. Lu, and P. Sarin, 63rd Annual Oklahoma ACS Pentasectional Meeting, Tulsa, Oklahoma, April 21st, 2018.


19

78. “Advanced Materials Characterization Facility at the Helmerich Research Center at OSU-Tulsa,” F. Lu*, P. Sarin, and R. P. Singh, 63rd Annual Oklahoma ACS Pentasectional Meeting, Tulsa, Oklahoma, April 21st, 2018.

79. “Treatment of Produced Water using Evaporative Desalination Technology,” K. A. Sallam*, P. Sarin, and D. Y. Kim, 38th Oklahoma AIAA/ASME Symposium, Oklahoma Christian University, Oklahoma City, Oklahoma, April 14th, 2018.

80. “Interpretation of Recrystallization Processes of Sedimentary Dolomites as Deduced from Crystal Structural and Geochemical Data with Implications for Reservoir Characterization,” G. Lukoczki*, P. Sarin, J. M. Gregg, and C. M. John, American Association of Petroleum Geologists Annual Convention and Exhibition, Salt Lake City, Utah, May 20th – 23rd, 2018.

81. “Lamp Furnace for In-situ Diffraction and Total Scattering Studies in Controlled Atmospheres,” P. Sarin*, D. R. Lowry and S. Ghose, Materials Science & Technology 2017, Pittsburgh, Pennsylvania, October 8th – 12th, 2017.

82. "Evaluation of a Summer Undergraduate Research Program in Material Science and Engineering," M. Mwarumba, R. Vaidyanathan, and P. Sarin, ASEE Midwest Section Conference, Stillwater, Oklahoma, September 24th – 27th, 2017.

83. “Ceramics – Trial by Fire,” P. Sarin*, Materials in Science, Technology, Engineering and Math (M-STEM) 2016, Owasso, Oklahoma, November 6th – 8th, 2016.

84. “Diary of an REU Scholar – 2016 Materials Science and Engineering NSF-REU program at OSU, Tulsa,” G. J. Dillard and P. Sarin*, Materials in Science, Technology, Engineering and Math (M-STEM) 2016, Owasso, Oklahoma, November 6th – 8th, 2016.

85. “Comparative Study of the Effect of Zr4+ Dopant on Phase Transformations in Rare-earth Ortho-niobates and -tantalates,” P. Sarin* and D. R. Lowry, Materials Science & Technology 2016, Salt Lake City, Utah, October 23rd – 27th, 2016.

86. “Phase Transformation and Thermal Expansion Properties of (La,R)NbO4-δ; R=Ca, Ba, Sr,” D. R. Lowry* and P. Sarin, Materials Science & Technology 2015, Columbus, Ohio, October 4th – 8th, 2015.

87. “Tantalum Pentoxide Phase Transition and Thermal Expansion,” S. McCormack*, K. C. Seymour, R. P. Haggerty, P. Sarin and W. M. Kriven, Materials Science & Technology 2015, Columbus, Ohio, October 4th – 8th, 2015.

88. “Understanding the Role of the Alkali Cation in Determining Phase Transformation Properties of A2O-Al2O3-4SiO2 Compounds (A = Alkali cation),” J. Beach, P. Sarin*, A. Stevenson, D. R. Lowry and W. M. Kriven, Materials Science & Technology 2015, Columbus, Ohio, October 4th – 8th, 2015.

89. "In-situ High Temperature Synchrotron Studies of Ceramics," W.M. Kriven*, P. Sarin, R. P. Haggerty, Z. D. Apostolov, R. W. Hughes, Z. A. Jones, J. Angelkort, S. P. Letourneau, P. E. Driemeyer, and K. C. Seymour, International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, Whistler, British Columbia, Canada, June 28th - July 3rd, 2015.


20

90. "An In-situ Method to Identify Lattice Correspondences for High Temperature Ceramic Phase Transformations," R. P. Haggerty, Z. A. Jones, P. Sarin, and W. M. Kriven*, International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, Whistler, British Columbia, Canada, June 28th - July 3rd, 2015.

91. "Phase Transformations in Fergusonite Type Rare Earth Tantalates," R. W. Hughes, Z. D. Apostolov, P. Sarin, and W. M. Kriven*, International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, Whistler, British Columbia, Canada, June 28th - July 3rd, 2015.

92. “Influence of Ca2+ Ion doping on the Phase Transformation and Thermal Expansion Properties of LaNbO4,” D. R. Lowry and P. Sarin*, 11th International Conference on Ceramic Materials and Components for Energy and Environmental Applications, Vancouver, British Columbia, Canada, June 14th – June 19th, 2015.

93. “In-situ, High Temperature, Synchrotron Studies on the Oxidation of ZrB2 and Composites,” P. Sarin* and W. M. Kriven, Ultra-High Temperature Ceramics: Materials for Extreme Environment Applications III, Surfer’s Paradise, Gold Coast, Australia, April 12th – 17th, 2015.

94. “A Novel Approach to Predict Thermo-physical Properties of Mullite Phase 3Al2O3•2SiO2,” P. Norouzzadeh* and P. Sarin, Materials Science & Technology 2014, Pittsburgh, Pennsylvania, October 12th – 16th, 2014.

95. “Effect of Zr4+ Doping on the Monoclinic to tetragonal phase transformation in LaNbO4,” D. R. Lowry* and P. Sarin, Materials Science & Technology 2014, Pittsburgh, Pennsylvania, October 12th – 16th, 2014.

96. “Characterization of Tetragonal-Monoclinic, Ferroelastic Transformation and Domain Boundaries in Zirconia-Alloyed Yttrium Tantalate,” M. Baram*, S. Shian, M. Gurak, J. Feng, P. Sarin, W. M. Kriven and D. R. Clarke, Microscopy & Microanalysis 2014, Hartford, Connecticut, August 3rd - 7th, 2014.

97. “Phase Transformations in YTaO4 and the Effect of Zr-ion Doping,” P. Sarin*, Z. D. Apostolov, S. Shian, D. R. Lowry, D.R. Clarke, and W. M. Kriven, 37th International Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, Florida, January 27th – February 1st, 2013.

98. “Characterization of Structural Behavior Under Re-entry Type Transformations in Ln6WO12 (Ln= Y, Ho, Er, Yb),” Z. D. Apostolov*, P. Sarin, and W. M. Kriven, 37th International Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, Florida, January 27th – February 1st, 2013.

99. “In-situ Synchrotron X-ray Diffraction Study of the Cubic to Rhombohedral Phase Transformation in Ln6WO12 (Ln= Y, Ho, Er, Yb),” Z. D. Apostolov *, P. Sarin, and W. M. Kriven, Materials Science & Technology 2012, Pittsburgh, Pennsylvania, October 7th – 11th, 2012.

100. “Thermal Properties and Phase Transition of 2ZrO2·P2O5 Studied by In-situ Synchrotron X-ray Diffraction Experiments,” J. Angelkort *, P. Sarin, Z. A. Jones, S. Letouorneau, Z. D. Apostolov, and W. M. Kriven, Materials Science & Technology 2012, Pittsburgh, Pennsylvania, October 7th – 11th, 2012.


21

101. “Ferroelastic Phase Transformations in Rare-Earth Niobates,” P. Sarin*, D. R. Lowry, J. Angelkort, Z. D. Apostolov, R. P. Haggerty, and W. M. Kriven, 36th International Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, Florida, January 22nd – 27th, 2012.

102. “Thermal Stability and Expansion Properties of Rare Earth Monosilicates,” P. Sarin*, D. R. Lowry, Z. D. Apostolov, J. Angelkort, Z. A. Jones, and W. M. Kriven, 36th International Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, Florida, January 22nd – 27th, 2012.

103. “CTEAS – A GUI Based Program to Calculate Coefficients of Thermal Expansion of Crystalline Materials from High Temperature Powder X-ray Diffraction,” Z. A. Jones*, P. Sarin, R. P. Haggerty, Z. D. Apostolov, and W. M. Kriven, 36th International Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, Florida, January 22nd – 27th, 2012.

104. “In-situ Synchrotron X-ray Diffraction and Thermal Analysis Study of the Cubic to Rhombohedral Phase Transformation in Y6WO12 and its Thermal Expansion Behavior up to 1500°C,” Z. D. Apostolov *, P. Sarin, R. P. Haggerty, and W. M. Kriven, 36th International Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, Florida, January 22nd – 27th, 2012.

105. “Investigations on the Phase Transitions of ZrP2O7 and Zr2P2O9,” J. Angelkort *, P. Sarin, Z. D. Apostolov, P. F. Keane, and W. M. Kriven, 36th International Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, Florida, January 22nd – 27th, 2012.

106. “In-situ Synchrotron Studies of the Tetragonal to Monoclinic Phase Transformation in Hafnia and Zirconia,” R. P. Haggerty, P. Sarin, Z. D. Apostolov and W. M. Kriven*, 36th International Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, Florida, January 22nd – 27th, 2012.

107. “Germanium Mullites – Structural Aspects of Lattice Thermal Expansion,” P. Sarin, D. R. Lowry, Z. D. Apostolov, R. P. Haggerty, Z. A. Jones, P. F. Keane, and W. M. Kriven*, Mullite 2011, 5th International Workshop on Mullite and Mullite-Type Materials, Avilés, Spain, May 8th – 11th, 2011.

108. “CTEAS - Program to Determine Thermal Expansion Properties of Materials From High Temperature X-ray Diffraction,” R. P. Haggerty*, P. Sarin, Z. A. Jones, and W. M. Kriven, 35th International Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, Florida, January 23rd – 28th, 2011.

109. “Oxidation Studies of ZrB2 and ZrB2-SiC Composites Using HTXRD,” P. Sarin*, P. Driemeyer, R. P. Haggerty, D.-K. Kim, J. L. Bell, and W. M. Kriven, 35th International Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, Florida, January 23rd – 28th, 2011.

110. “X-Ray studies of Phase Transformations in Tantalum Pentoxide,” P. Sarin*, R. P. Haggerty, Z. D. Apostolov and W. M. Kriven, 35th International Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, Florida, January 23rd – 28th, 2011.


22

111. “In-situ Studies of Phase Transformations in Ta2O5 and DyNbO4 by Hot Stage Microscopy,” D. R. Lowry*, P. Sarin and W. M. Kriven, 35th International Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, Florida, January 23rd – 28th, 2011.

112. “In-situ, High Temperature, Synchrotron Studies of Monoclinic to Tetragonal Phase Transformation in HfO2 and Ta2O5 - Doped HfO2 System,” R. P. Haggerty*, P. Sarin, Z. D. Apostolov, Z. A. Jones, and W. M. Kriven, 35th International Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, Florida, January 23rd – 28th, 2011.

113. “Studies of L-Ta2O5 to H-Ta2O5 Phase Transformation using HTXRD,” P. Sarin*, R. P. Haggerty, Z. D. Apostolov, J. L. Bell and W. M. Kriven, International Conference on Solid-Solid Phase Transformations in Inorganic Materials, PTM 2010, Avignon, France, June 6th – June 11th, 2010.

114. “The Monoclinic to Tetragonal Phase Transformation in HfO2,” R. P. Haggerty*, P. Sarin, Z. D. Apostolov, P. Driemeyer, J. L. Bell and W. M. Kriven, International Conference on Solid-Solid Phase Transformations in Inorganic Materials, PTM 2010, Avignon, France, June 6th – June 11th, 2010.

115. “Porous Biphasic Calcium Phosphate Scaffolds Using Cuttlefish Bone,” P. Sarin*, S-J. Lee, Z. D. Apostolov, and W. M. Kriven, 34th International Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, Florida, January 24th – 29th, 2010.

116. “HfO2 - Ta2O5 Binary System: Investigation of Stable Phases,” R. P. Haggerty*, Z. D. Apostolov, P. Sarin and W. M. Kriven, 34th International Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, Florida, January 24th – 29th, 2010.

117. “Examining the Anisotropic Thermal Expansion Behavior of CaWO4 Using High Temperature X-ray Diffraction,” C. Tribout*, P. Sarin, R. P. Haggerty, Z. D. Apostolov and W. M. Kriven, 34th International Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, Florida, January 24th – 29th, 2010.

118. “High Temperature X-ray Diffraction Studies of Monoclinic to Tetragonal Phase Transformation in HfO2,” R. P. Haggerty*, P. Sarin, Z. D. Apostolov and W. M. Kriven, Materials Science and Technology 2009, Pittsburgh, Pennsylvania, October 25th – October 29th, 2009.

119. “High Temperature Structural Studies of Ceramics and Composites Using Synchrotron Radiation,” P. Sarin* and W. M. Kriven, 33rd International Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, Florida, January 18th – 23rd, 2009.

120. “Crystallographic Studies on Thermal Expansion Properties of Y2SiO5,” P. Sarin*, R. P. Haggerty, A. R. Cackovic, Z.D. Apostolov, J. L. Bell, P. E. Driemeyer and W. M. Kriven, 33rd International Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, Florida, January 18th – 23rd, 2009.

121. “High Temperature X-ray Diffraction Studies of Monoclinic to Tetragonal Phase Transformation in HfO2,” R. P. Haggerty*, P. Sarin, P. E. Driemeyer, J. L. Bell, A. R. Cackovic and W. M. Kriven, 33rd International Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, Florida, January 18th – 23rd, 2009.


23

122. “High Temperature Oxidation of ZrB2 and ZrB2-SiC Composites,” P. Sarin, P. E. Driemeyer, R. P. Haggerty, D.-K. Kim, J. L. Bell, and W. M. Kriven*, Ultra-High Temperature Ceramics: Materials for Extreme Environment Applications, Lake Tahoe, California, August 3rd – 8th, 2008.

123. “Short to Medium Range Structural Order in Amorphous, Pre-Zeolitic Geopolymers of Composition M2O.Al2O3.4SiO2.11H2O,” W. M. Kriven, J. L. Bell, P. Sarin, R. P. Haggerty, P. E. Driemeyer, 2nd International Congress on Ceramics, Verona, Italy, June 29th – July 4th, 2008.

124. “In-situ X-ray Diffraction of HfO2 Phase Transformation in Air at 1700°C,” R. P. Haggerty*, P. Sarin and W. M. Kriven, International Conference on Martensitic Transformations (ICOMAT), Santa Fe, California, June 29th – July 5th, 2008.

125. “Pair Distribution Function Analysis of Metakaolin-Based Geopolymers,” J. L. Bell*, P. Sarin, R. P. Haggerty, P. E. Driemeyer and W. M. Kriven, 32nd International Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, Florida, January 27th – February 1st, 2008.

126. “From Geopolymers to Ceramics,” W. M. Kriven*, J. L. Bell and P. Sarin, Annual Meeting of the European Ceramic Society, Berlin, Germany, June 17th – 21st, 2007.

127. “In-situ, High Temperature, Synchrotron Studies on the Oxidation Behavior of Group VI Diboride Materials Dispersed in an Oxide Matrix,” P. Sarin, D. K. Kim, R. Haggerty and W. M. Kriven*, 16th International Symposium on the Reactivity of Solids (ISRS-16), Minneapolis, Minnesota, June 3rd – 6th, 2007.

128. “Porous Architectures of Calcium Phosphate Templates for Bone, Ligament and Cartilage Growth,” D. K. Kim, P. Sarin, N. L. Smith, L. Lee, M. C. Stewart and W. M. Kriven*, 31st International Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, Florida, January 21st – 26th, 2007.

129. “XPS Study of Metakaolin-based Geopolymers,” S. Mallicoat*, P. Sarin and W. M. Kriven, 31st International Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, Florida, January 21st – 26th, 2007.

130. “Crystallization of Pollucite (CsAlSi2O6) from Cs-based Geopolymer Precursor,” J. L. Bell*, P. Sarin, R. P. Haggerty, M. Gordon, J. L. Provis, and W. M. Kriven, 64th Pittsburgh Diffraction Conference, Duquesne University, Pittsburgh, Pennsylvania, October 26th – 28th, 2006.

131. “Microstructure Evolution of Polycrystalline Mullite System – A High Temperature Synchrotron X-ray Diffraction Study,” W. Yoon*, P. Sarin, R. P. Haggerty and W. M. Kriven. Presented at 64th Pittsburgh Diffraction Conference, Duquesne University, Pittsburgh, Pennsylvania, October 26th – 28th 2006.

132. “Using In-situ High Temperature Synchrotron Diffraction to Study Dynamic Phenomena in Polycrystalline Material Systems,” R. P. Haggerty*, P. Sarin, W. Yoon, J. L. Bell, M. Gordon and W. M. Kriven. Presented at 64th Pittsburgh Diffraction Conference, Duquesne University, Pittsburgh, Pennsylvania, October 26th – 28th 2006.

133. “Curved Image Plate (CIP) Detector for Rapid High Resolution Powder X-ray Diffraction Using Synchrotron Radiation,” P. Sarin*, W. Yoon, R. P. Haggerty, P. Zschack, E.


24

Karapetrova, N. Yang and W. M. Kriven, Fifth International Conference on Synchrotron Radiation in Materials Science, Chicago, Illinois, July 30th – August 2nd, 2006.

134. “Formation of Nanocrystalline Zeolites in Geopolymer Gels,” J. L. Bell*, P. Sarin, and W. M. Kriven, Microscopy and Microanalysis 2006, Chicago, Illinois, July 30th – August 3rd, 2006.

135. “Effect of Metal-ion Doping on High Temperature Thermal Expansion of 3:2 Mullite – An In-situ High Temperature Synchrotron Diffraction Study,” P. Sarin, W. Yoon, N.C. Bhorkar, C. Chiretescu, and W. M. Kriven*, Mullite 2006, 5th International Conference on Mullite, Vienna, Austria, June 9th – 11th, 2006.

136. “Rapid In-situ Ultra-High Temperature Investigations of Ceramics Using Synchrotron X-Ray Diffraction,” P. Sarin, R. P. Haggerty, W. Yoon, and W. M. Kriven*, 30th International Conference on Advanced Ceramics and Composites, Cocoa Beach, Florida, January 22nd – 27th, 2006.

137. “In-situ High Temperature Synchrotron X-Ray Diffraction Studies of Pollucite (CsAlSi2O6) and Pollucite-based-Compounds,” M. Gordon, P. Sarin, D. K, Kim, and W. M. Kriven*, 30th International Conference on Advanced Ceramics and Composites, Cocoa Beach, Florida, January 22nd – 27th, 2006.

138. “High Temperature Phase Transformations in Tantalum Pentoxide,” P. Sarin and W. M. Kriven*, International Conference on Solid-Solid Phase Transformations in Inorganic Materials, Phoenix, Arizona, May 29th – June 3rd, 2005.

139. “In-situ High Temperature Phase Transformation Studies of HfO2 and HfO2-Ta2O5 system,” P. Sarin, R. P. Haggerty, and W. M. Kriven*, International Conference on Solid-Solid Phase Transformations in Inorganic Materials, Phoenix, Arizona, May 29th – June 3rd, 2005.

140. “Phase Transformations in Rare Earth Niobates,” W. M. Kriven*, P. Sarin, and L. F. Siah, International Conference on Solid-Solid Phase Transformations in Inorganic Materials Phoenix, Arizona, May 29th – June 3rd, 2005.

141. “In-situ High Temperature Investigations of Phase Transformations in Ta2O5,” P. Sarin*, A. J. Randolph, W. M. Kriven, 29th International Conference on Advanced Ceramics and Composites, Cocoa Beach, Florida, January 23rd – 28th, 2005.

142. “High Temperature Tensile Testing Method for Monofilament Ceramic Fibers,” B. M. Yee*, P. Sarin, and W. M. Kriven, 29th International Conference on Advanced Ceramics and Composites, Cocoa Beach, Florida, January 23rd – 28th, 2005.

143. “Novel Alkali Bonded Ceramic Filtration Membranes,” S. Mallicoat*, P. Sarin and W. M. Kriven, 29th International Conference on Advanced Ceramics and Composites, Cocoa Beach, Florida, January 23rd – 28th, 2005.

144. “Corrosion Control Optimization Using Lead Pipe Loops,” A. Atassi*, C. Feizoulof, B. Melcher, V. L. Snoeyink and P. Sarin, AWWA Water Quality Technology Conference, San Antonio, Texas, November 14th – 18th, 2004.

145. “In-situ High Temperature (up to 1650°C), in Air, X-Ray Diffraction (Reflection Geometry) Using a Quadrupole Lamp Furnace,” P. Sarin*, K. Jurkschat, W. M. Kriven and


25

P. Zschack, 53rd Annual Denver X-Ray Conference, Steamboat Springs, Colorado, August 2nd – 6th, 2004.

146. “X-Ray Microdiffraction Studies of Corrosion Scales in Old Iron/Steel Drinking Water Distribution Pipes,” P. Sarin*, V. L. Snoeyink, W. M. Kriven, D. Hay, 53rd Annual Denver X-Ray Conference, Steamboat Springs, Colorado, August 2nd – 6th, 2004.

147. “High Temperature Phase Transformations in Rare Earth Titanates,” K. Jurkschat, P. Sarin*, and W. M. Kriven, 53rd Annual Denver X-Ray Conference, Steamboat Springs, Colorado, August 2nd – 6th, 2004.

148. “Phosphates for Lead Control: One Utility’s Pipe Loop Testing Experience,” A. Atassi*, B. Melcher, C. Feizoulof, V. L. Snoeyink, and P. Sarin, AWWA Annual Conference, Orlando, Florida, June 13th – 17th, 2004.

149. “Using harvested lead pipe to refine phosphate inhibitor dosage for lead control,” B. Melcher*, C. Feizoulof, P. Sarin, and V. L. Snoeyink, AWWA Annual Conference, Orlando, Florida, June 2004.

150. “The Effect of Chloride and Orthophosphate on the Release of Iron from a Drinking Water Distribution System Cast Iron Pipe,” D.A. Lytle*, P. Sarin and V. L. Snoeyink, Water Quality Technology Conference, Philadelphia, Pennsylvania, November 2nd – 5th, 2003.

151. “In-situ High Temperature Phase Transformations in Rare Earth Niobates” K. Jurkschat*, P. Sarin, L. F. Siah and W. M. Kriven, 52nd Annual Denver X-Ray Conference, Denver, Colorado, August 4th – 8th, 2003.

152. “Iron Release and Colored Water Formation from Iron Scales,” V. L. Snoeyink, P. Sarin* and D. A. Lytle, AWWA Annual Conference, Anaheim, California, June 2003.

153. “Iron Release and Colored Water Formation from Iron Scales – A Conceptual Model,” V. L. Snoeyink*, P. Sarin and D. A. Lytle, 1st IWA International Conference on Scaling and Corrosion in Water and Wastewater Systems, Cranfield, Bedfordshire, United Kingdom, March 2003.

154. “Interaction of Corrosion Scales in Old Iron/Steel Drinking Water Distribution Pipes,” P. Sarin*, V. L. Snoeyink and W. M. Kriven, 223rd American Chemical Society National Meeting, Orlando, Florida, April 7th – 11th, 2002.

155. “Mechanism of Release of Iron from Corroded Iron/Steel Pipes in Water Distribution Systems,” P. Sarin*, J. Bebee, M. A. Beckett, K. K. Jim, D.A. Lytle, J. A. Clement, W. M. Kriven and V. L. Snoeyink, AWWA Annual Conference, Denver, Colorado, June 12th – 16th, 2000.

156. “Release of Iron from Corroded Iron/Steel Pipes in Water Distribution Systems – Effect of Stagnation Time,” P. Sarin*, J. Bebee, M. A. Beckett, K. K. Jim, D. A. Lytle, J. A. Clement, W. M. Kriven and V. L. Snoeyink, International Distribution Research Symposium, Denver, Colorado, June 10th – 11th, 2000.

157. “Corrosion Scales in Iron/Steel Drinking Water Pipes – A Source of ‘Red Water’,” P. Sarin*, V. L. Snoeyink, J. Bebee, M. A. Beckett, K. K. Jim and W. M. Kriven, Workshop on Development of Red Water Control Strategies at Tampa, Florida, November 4th, 1999.


26

158. “Systematic Study of Corrosion Scales and their Effect on Release of Iron Particles in Drinking Water,” P. Sarin*, K. K. Jim, D. Lytle, M. A. Beckett, W. M. Kriven, V. L. Snoeyink and J. A. Clement, AWWA Conference on Particle Measurement and Characterization in Drinking Water Treatment, Nashville, Tennessee, March 28th – 30th, 1999.

159. “Characterization of Tubercles in Cast Iron Water Distribution Pipes Using Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS),” P. Sarin*, W. M. Kriven and V. L. Snoeyink, Microscopy and Microanalysis ‘97, 53rd Annual Meeting of Microscopy Society of America, Cleveland, Ohio, August 10th – 14th, 1997.

160. “Analysis and Interpretation of the Physical, Chemical and Biological Characteristics of Distribution System Pipe Scales,” J. A. Clement*, V. Snoeyink, A. Camper, A. Sandvig, P. Sarin and W. M. Kriven, Water Quality Technology Conference, San Diego, California, November 1st – 5th, 1998.

161. “A Pipe Loop System for Evaluating Iron Uptake in Distribution Systems,” M. A. Beckett*, V. L. Snoeyink, K. K. Jim, P. Sarin, D. A. Lytle, W. Kriven and J. A. Clement, Water Quality Technology Conference, San Diego, California, November 1st – 5th, 1998. (Published in Proceedings Water Quality Technology Conference 1998)

162. “Fresco Pigments from Byzantine Cappadocia, Part II,” S. Wisseman*, P. Sarin, R. Ousterhout, E. D. Sena and W. S. Williams, 31st International Symposium on Archeometry, Budapest, Hungary, April 27th – May 1st, 1998.

163. “Interpretation of Black Surface of Ancient Chinese Bronze Mirrors,” W. S. Williams*, P. Sarin, C. Wang and S. Wisseman, 31st International Symposium on Archeometry, Budapest, Hungary, April 27th – May 1st, 1998.


27

GRADUATE ADVISING

Ph.D. Dissertations 1. Daniel R. Lowry, “Investigations on the effect of aliovalent doping on the crystallographic,

and thermo-physical properties of rare earth niobate ceramics”, School of Materials Science and Engineering, Oklahoma State University (in progress).

2. Georgina Lukoczki, “Multi-phase dolomitization and recrystallization of Middle Triassic shallow marine–peritidal carbonates of southwestern Hungary”, Boone Pickens School of Geology, Oklahoma State University (in progress).

M.S. Theses 1. Ying Xu, “Evaluation of geopolymers for produced water solutions”, School of Materials

Science and Engineering, Oklahoma State University (in progress) 2. Rohit Bukka, “Crystallography and control of proton conduction in ortho-niobate

ceramics”, School of Materials Science and Engineering, Oklahoma State University (in progress)

3. Swathiha P. L. Kumar, “Mechano-chemical recovery of PGMs from used metal-foil auto catalysts”, School of Materials Science and Engineering, Oklahoma State University (2017).

4. Daniel R. Lowry, “Effects of Ca2+ and Zr4+ doping on the thermophysical properties of LaNbO4”, School of Materials Science and Engineering, Oklahoma State University (2015).

Other Member, Doctoral/M.S. Dissertation committees for the following students

1. Vishanth Uppu, M.S. in Materials Science and Engineering (2018)

2. Amir Behravan, Ph.D. in Civil Engineering (2018)

3. Tres A. Harriman, Ph.D. in Mechanical Engineering (2017).

4. Eric Drake, M.S. in Materials Science and Engineering, (2017).

5. Lukas Witek, Ph.D. in Chemical Engineering (2015).

6. Marshall Harrup, M.S. in Materials Science and Engineering (2015).


28

SERVICE

Department/University Service • Member, Search Committee Nov. 2016 to Dec 2016

Administrative Assistant position School of Materials Science and Engineering, Oklahoma State University

• Member, Search Committee Feb. 2015 to May 2015 Advanced Materials faculty position School of Materials Science and Engineering, Oklahoma State University

• Chair, Program Marketing Committee Fall 2015 to present School of Materials Science and Engineering, Oklahoma State University

• Member, Ph.D. Qualifier Examination Committee Fall 2015 to present School of Materials Science and Engineering

• Member, Graduate Studies Committee Fall 2015 to present School of Materials Science and Engineering

• Member, Search Committee Aug. 2013 to Apr. 2014 Research Scientist position in the Helmerich Research Center, Oklahoma State University, Tulsa,

• Contributed towards developing the Strategic Plan for the School of Materials Science and Engineering at Oklahoma State University.

• Actively participated in preparing the Graduate Student Handbook for students in the School of Materials Science and Engineering at Oklahoma State University.

Professional Service Technical Committees

• Member Sep. 2018 “NSLS-II SAC Review Committee for the XPD Beamline” Brookhaven National Laboratory.

• Chair Oct. 2016 to Oct. 2017 “Phase Equilibria Program and Spriggs Award Committee” American Ceramic Society.

• Member Oct. 2014 to Oct. 2017 “Phase Equilibria Program and Spriggs Award Committee” American Ceramic Society.

• Member, Project Advisory Committee Jul. 2005 to Aug. 2009 American Water Works Research Foundation, Denver, CO Project Title: “Assessment of inorganics accumulation in drinking water system scales and sediments” Participated in development of RFP; reviewed proposals; attended PAC meeting and expert workshop to advise the project team on issues pertaining to scale analysis; reviewed quarterly reports to assess progress and offer feedback.


29

Symposia Organizer

• Lead Organizer Oct. 2018 – Oct. 2019 Symposium: “Phase Transformations in Ceramics: Science and Applications” Conference: Materials Science & Technology 2016, Portland, OR

• Co-Organizer Oct. 2017 – Oct. 2018 Symposium: “Phase Transformations in Ceramics: Science and Applications” Conference: Materials Science & Technology 2018, Columbus, OH

• Co-Organizer Oct. 2016 – Oct. 2017 Symposium: “Phase Transformations in Ceramics: Science and Applications” Conference: Materials Science & Technology 2017, Pittsburgh, PA

• Lead Organizer Oct. 2015 – Oct. 2016 Symposium: “Phase Transformations in Ceramics: Science and Applications” Conference: Materials Science & Technology 2016, Salt Lake City, UT

• Co-Organizer Oct. 2014 – Oct. 2015 Symposium: “Phase Transformations in Ceramics: Science and Applications” Conference: Materials Science & Technology 2015, Columbus, OH

• Co-Organizer Jul. 2014 – Oct. 2014 Symposium: “Phase Transformations in Ceramics: the Present and the Future” Conference: Materials Science & Technology 2014, Pittsburgh, PA

Session Chair for Symposia

• “Transformation Mechanisms at the Atomic Scale” session in the symposium “Phase Transformations in Ceramics: Science and Applications”, Materials Science & Technology 2016 Salt Lake City, UT, October 23rd – 27th, 2016.

• “Atmosphere-induced Transformations” session in the symposium “Phase Transformations in Ceramics: Science and Applications”, Materials Science & Technology 2015, Columbus, OH, October 4th – 8th, 2015.

• “Phase Transformations: Microstructure and Properties” session in the symposium “Phase Transformations in Ceramics: The Present and the Future”, Materials Science & Technology 2014, Pittsburgh, PA, October 12th – 16th, 2014.

• "Structural Stability under Extreme Environments" session in the symposium “Materials for Extreme Environments: Ultrahigh Temperature Ceramics (UHTCs) and Nanolaminated Ternary Carbides and Nitrides (MAX Phases)”, 35th International Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, Florida, January 23rd – 28th, 2011.

Peer Reviewer for Journals 1.) Acta Materiala; 2.) Biofouling; 3.) Ceramic Engineering and Science Proceedings; 4.) Ceramics International; 5.) Critical Reviews in Environmental Science and Technology; 6.)


30

Desalination and Water Treatment; 7.) Environmental Science and Technology; 8.) Journal American Water Works Association; 9.) Journal of Applied Crystallography; 10.) Journal of Ceramics; 11.) Journal of Environmental Engineering – ASCE; 12.) Journal of the European Ceramic Society; 13.) Journal of Hazardous Materials; 14.) Journal of Materials Research; 15.) Journal of Materials Science; 16.) Journal of the American Ceramic Society; 17.) Journal of Water Supply Research and Technology – AQUA; 18.) Materials Chemistry & Physics; 19.) Review of Scientific Instruments; 20.) Science of the Total Environment; 21.) Water Research

Consulting Consulted with the following companies to on their materials related issues:

• Plasma Bionics, LLC (Stillwater, OK) • Access Optics, LLC (Tulsa, OK) • Duncan Recycling and Refining, LLC (Duncan, OK) • Dvorak Instruments, Inc. (Tulsa, OK) • US Lime Company, Marble City, OK

Participation for Professional Development • MATLAB Fundamentals Self-Paced Training Aug. 2015

• National Effective Teaching Institutes (NETI-1B) Jun. 2015 Offered by the American Society of Engineering Education (ASEE)

• Member, American Ceramic Society Nov. 1997 to present

• Member, Materials Research Society Jul. 2007 to present

• Member, American Chemical Society

• Member, National Institute of Ceramic Engineers Nov. 1997 to present

• User, Advanced Photon Source, Argonne National Laboratory Jun. 2000 to present

• User, National Synchrotron Light Source (and NSLS II) Jun. 2001 to present Brookhaven National Laboratory

Pankaj Sarin - Oklahoma State University–Tulsa...Jan 07, 2019 · Curriculum Vitae, Pankaj Sarin...

Documents

Transcript of Pankaj Sarin - Oklahoma State University–Tulsa...Jan 07, 2019 · Curriculum Vitae, Pankaj Sarin...