OUTLINE SPECIFICATIONS

City of Beverly Hills – Public Works Warehouse 9333 Third Street BEVERLY HILLS, CALIFORNIA DECEMBER 8, 2010 RTK PROJECT NO. 09-008 Prepared by: RTK ARCHITECTS INC. 2020 So. Robertson Boulevard, Los Angeles, CA 90034-1131

City of Beverly Hills – Public Works Warehouse Table of Contents 00010 - 1

SECTION 00010 TABLE OF CONTENTS INTRODUCTORY PAGES 00010 Table of Contents CONTRACT FORMS AND CONDITIONS SPECIFICATIONS Division 2 – Demolition

02230 Site Clearing 02300 Earthwork 02630 Storm Drainage 02741 Hot-Mix Asphalt Paving 02751 Cement Concrete Pavement 02813 Lawn Sprinkler Piping 02824 Steel Fencing 02930 Exterior Plants

Division 3 – Concrete 03200 Concrete Reinforcement 03300 Cast-In-Place Concrete 03342 Composite Insulating Concrete 03371 Shotcrete

03520 Lightweight Concrete Roof Insulation 03532 Concrete Floor Topping

Division 4 – Masonry 04200 Masonry 04810 Unit Masonry Assemblies Division 5 – Metals 05120 Structural Steel 05210 Steel Joints 05300 Metal Decking 05500 Miscellaneous Metal 05510 Metal Stairs 05521 Pipe and Tube Railings 05700 Ornamental Metal 05720 Ornamental Handrails and Railings Division 6 - Wood and Plastics 06403 Interior Engineered Woodpaneling - Trespa Division 7 - Thermal, Moisture and Acoustical 07110 Composite Sheet Membrane Waterproofing 07142 Fluid-Applied Waterproofing 07190 Clear Water Repellents

07210 Building Insulation 07533 Thermoplastic Single-Ply Membrane Roofing (Sika Sarnafil)

075419 PVC Thermoplastic Membrane Roofing 07620 Sheet Metal Flashing and Trim

City of Beverly Hills – Public Works Warehouse Table of Contents 00010 - 2

07720 Roof Accessories Division 8 - Doors and Windows 08110 Steel Doors and Frames 08211 Flush Wood Doors 08300 Elevator Door Smoke-Containment System 08331 Overhead Coiling Doors 08510 Steel Windows

08520 Aluminum Windows 08710 Door Hardware

08800 Glazing 08920 Glazed Aluminum Curtain Walls Division 9 – Finishes 09220 Portland Cement Plaster

09260 Gypsum Board Assemblies 09310 Ceramic Tile 09512 Acoustical Tile Ceilings 09651 Resilient Tile Flooring 09680 Carpet 09900 Painting and Coating 09912 Painting (Professional Line Products) Division 10 – Specialties

10170 Toilet Compartments 10200 Louvers and Vents 10425 Signs 10500 Lockers 10520 Fire-Protection Specialties 10605 Wire Mesh Partitions 107113 Architectural Sunshades 10801 Toilet and Bath Accessories Division 11 – Equipment 11150 Parking Control Equipment

Division 13 – Special Construction 13000 Solar Collectors 13851 Fire Alarm 13916 Fire-Suppression Sprinklers

Division 14 – Conveying Systems 14240 Hydraulic Elevators

Sections included in this package.

SECTION 03200

CONCRETE REINFORCEMENT Scope Provide reinforcement for concrete work of all classifications. Use sufficient skilled workmen thoroughly trained to perform this work. Comply with pertinent provisions of ACI 318 and the CRSI Manual of Standard Practice. Submit shop drawings showing details of bar, anchors and special items. Materials: Reinforcing Steel ASTM A 615, Grades 40 & 60 Steel Wire ASTM A 82 Welded Wire Fabric ASTM A 185 Provide bolsters, chairs, spacers and other devices for spacing, supporting and fastening reinforcement in place. Fabricate bars to conform to required shapes and dimensions within tolerances which will satisfy UBC, ACI and CRSI limitations. Quality control program will include testing of identifiable and non-identifiable material on a predetermined tonnage basis. Continuous inspection as defined in CBC Table 1704.4 will be required for all structural concrete.

City of Beverly Hills – Public Works Warehouse Concrete Reinforcement – 03200 - 1

SECTION 03300

CAST-IN-PLACE CONCRETE Scope: Provide cast-in-place concrete where shown and as specified and as needed for a complete and proper installation. Comply with the following ACI Standards: 301, 305, 306 and 318. Material Specifications: Normal weight aggregates ASTM C 33 Portland cement ASTM C 150, Type II, Low Alkali Water from potable source Admixtures ASTM C 494 Strengths = (General) F'c = 3000 psi or as noted on structural drawings Mix designs shall be prepared and signed by a California Registered Civil Engineer for the testing laboratory of record. Provide or arrange for all field tests required to satisfy quality control requirements mandated by code or local authorities. Each load of concrete shall be accompanied by a certified Weighmaster's delivery ticket.

City of Beverly Hills – Public Works Warehouse Cast-In-Place Concrete – 03300 - 1

SECTION 03342

COMPOSITE INSULATING CONCRETE Scope: Provide insulating concrete roof fill as indicated and as specified as needed for a complete installation. Material Specification: Portland Cement ASTM C150 Type I, II or III, Low Alkali Lightweight aggregate Vermiculite or Perlite Type. ASTM C332 Group 1. Insulation Board Expanded Polystyrene board type with perforation Reinforcing Mesh Keydeck 2160-2-1619 mesh Install composite insulating concrete to provide 1-hr. fire rated roof deck system.

City of Beverly Hills – Public Works Warehouse Composite Insulate Concrete – 03342 - 1

SECTION 03361

SHOTCRETE

SCOPE Provide shotcrete (gunite or pneumatically placed concrete) as indicated, specified, and required.

Qualifications of Shotcrete Subcontractor: Proposed Subcontractor must have at least 5 years experience in structural shotcrete construction and constructed at least 20 significant structural shotcrete installations which, on investigation, have been found to be completed in a satisfactory manner.

Qualifications of Mechanics: Employ skilled nozzlemen, nozzleman's helpers, and rodmen, each having at least 3 years of structural shotcrete placing experience and furnish satisfactory written evidence of such experience upon request.

SHOTCRETE MATERIALS

Portland Cement: ASTM C 150, Type II, low alkali.

Fine Aggregate: ASTM C 33, washed hard, dense, durable, clean, sharp sand, from approved source, free of organic matter and containing not over 3% by weight of deleterious substances.

Water. Potable and maintained at a uniform pressure not less than 15 psi above air

pressure at the nozzle. SHOTCRETE QUALITY. Accurately control proportion of water to portland cement to product

thorough and uniform hydration of the shotcrete that, when shot, forms a homogenous mass containing neither sags nor dry sand formations.

PROTECTION. Protect surfaces not receiving shotcrete with waterproof paper or other

adequate means. Repair all damage as approved, at no extra cost to Owner. Inspection: Construct structural shotcrete under the continuous inspection of an Inspector.

Obtain inspection and approval of forms and reinforcing by the Building Department as required and by the Inspector before placing structural shotcrete.

City of Beverly Hills – Public Works Warehouse Shotcrete – 03361 - 1

SECTION 04200

MASONRY

Scope:

Provide reinforced concrete block masonry where shown and as specified and as needed for a complete and proper installation.

Material Specifications:

Concrete Block Masonry ASTM C 90, Grade N–1 Medium-weight

Mortar Type S 1,800 psi at 28 days Grout Minimum compressive strength =2,000 psi at 28

days

Construct masonry in accordance with Code and Concrete Masonry Association for reinforced masonry.

Continuous inspection by deputy inspector will be required.

Testing Laboratory will test mortar and grout. Note: Where indicated on the Drawings as “Alt No. 2”, use the following: Concrete Block Masonry: Angelus Block normal weight and normal stress.

Finish: Burnished Color: Sandstone, with sealer on all exposed surfaces

City of Beverly Hills – Public Works Warehouse Masonry – 04200 - 1

SECTION 05120

STRUCTURAL STEEL Scope: Provide structural steel as shown on drawings, specified herein and required for a complete installation. Fabrication and erection shall be performed by a firm which has demonstrated the capability to perform this work within the schedules and quality control limits as established. Product: Materials shall comply with the following specifications: Rolled Wide Flange steel shapes ASTM A 992 Fy= 50 KSI

Angles and plates ASTM A 36 Pipe ASTM A 53, Grade B Tubing ASTM A 500, Grade B Unfinished threaded fasteners ASTM A 307 High strength fasteners ASTM A 325 Electrodes for welding AWS A 5.1, E 70XX Fabrication and erection shall conform to AISC Specification for the Design, Fabrication and Erection of Structural Steel for Building, and AISC Code of Standard Practice. Fabricator shall qualify and be registered as an Approved Fabricator as defined in Section 1704, CBC. Testing and inspection will be performed by the Laboratory of Record. Full penetration butt welds shall be continuously inspected and ultrasonically tested. All field welds require continuous inspection.

City of Beverly Hills – Public Works Warehouse Structural Steel – 05120 - 1

SECTION 05300

METAL DECKING

Scope: Provide metal decking where shown, as specified herein, and as needed for a complete installation. Submit data verifying currently valid ICBO and Underwriter's Laboratory approvals for use of decking as part of a fire rated assembly, together with evidence of assigned seismic diaphragm values. Product: Design of metal decking shall conform to AISI Specification for the design of Light Gage Cold-Formed Steel Structural Members, with appropriate steel fiber stresses and maximum load defection limitations. Decking design shall provide for composite behavior between the structural concrete fill and decking. Provide fusion weld shear studs of sizes and numbers specified on all beams and girders. Weld decking to supports with puddle welds in pattern as shown on the drawings. Major decking applications include: 1) Standard configuration for normal floors and roof. Sequence metal deck erection to comply with all OSHA safety regulations.

City of Beverly Hills – Public Works Warehouse Metal Decking – 05300 - 1

SECTION 05500

MISCELLANEOUS METAL Scope: Provide miscellaneous metal work shown, as specified herein, and as needed for a complete installation. Product: Materials shall comply with the following specifications and standards:

Wide Flange Shapes ASTM A-992 Steel angle shapes, plates and bars ASTM A 36 Steel plates to be bent or cold-formed ASTM A 283,Grade C Steel tubing ASTM A 500,Grade A or B Bar-size shapes ASTM A 306, Grade 65 Cold-finished steel bars ASTM A 108 Cold-rolled carbon steel sheets ASTM A 336 Galvanized carbon steel sheets ASTM A 526,G90 coating Stainless steel sheets AISI Type 302 or 304 Gray iron castings ASTM A 48,Class 10 Malleable iron castings ASTM A 47 Steel pipe ASTM A 53,Grade A Prime with 10-99 Enamel Primer, Rustoleum No. 5769 Primer or equivalent. Galvanize items where specified or where permanently exposed to weather.

City of Beverly Hills – Public Works Warehouse Miscellaneous Metal – 05500 - 1

SECTION 05510

METAL STAIRS Scope: Provide metal stairs where shown, as specified herein, and as needed for a complete installation. Product: Materials shall comply with the following minimum standards: Structural steel ASTM A 36/A992 Metal pans (risers and sub-treads) ASTM A 526,10 Gauge Sheet steel (galvanized) ASTM A 526,& A525 G90 Sheet steel (landings) ASTM A 366,10 Gauge Wire fabric, 2" x 2" / #12 + #12 ASTM A 185 Newel posts, steel tube ASTM A 53,Grade B Steel pipe ASTM A 53,Grade B Shop fabricate stairs in as large sections as practicable, and in accordance with shop drawings. Coordinate installation with other trades to assure proper interface with their work. Install stairs immediately following erection of structural steel to provide vertical access for construction personnel.

City of Beverly Hills – Public Works Warehouse Metal Stairs – 05510 - 1

SECTION 07110

COMPOSITE SHEET MEMBRANE WATERPROOFING

PRODUCTS: 2.01 Equal to “Paramount Paraseal Membrane.” A. For use on buried vertical and horizontal conditions such as backfilled foundation

walls, between slab plaza and retaining walls. B. Paramount Paraseal “LG” Membrane for use in blind side conditions on retained

earth, below slab with bentonite side up, in elevator pits Paraseal “GM.” C. Paramount Membrane for use in subgrade conditions designed to be impervious to

both water and natural gas.

City of Beverly Hills – Public Works Warehouse Composite Sheet Membrane Waterproofing – 07110 - 1

SECTION 07190

CLEAR WATER REPELLENTS

PRODUCTS: 2.01 Acceptable Manufacturer: Monochem. Telephone: (800) 491-9977 2.02 Materials and Components

A. Provide Monochem Permashield non-sacrificial, graffiti-control system on CMU block located on south and east non-secured elevations.

B. Provide Monochem Aqua Seal MER-Positive Waterproofing for concrete and masonry at exposed block on secured elevations, north and west elevations and interior sitewalls.

City of Beverly Hills – Public Works Warehouse Clear Water Repellents - 1

City of Beverly Hills – Public Works Warehouse PVC Thermoplastic Membrane Roofing - 075419 - 1

SECTION 075419

PVC THERMOPLASTIC MEMBRANE ROOFING

PRODUCTS 2.01 Manufacturer: Sika Sarnafil ‘PVC’ 20-Year Roofing System # 5327-15FB or equal

A. Main Field Sheet – S327-15 PVC 60 mils thermoplastic membrane with polyester reinforcement. Minimum Weight 0.36 pounds per sqft. Minimum 7oz/sqyd factory applied non woven polyester fleece backing.

B. Flashing Membranes G410-15 PVC 60 mils thickness with fiberglass reinforcement

Minimum Weight 0.36 pounds per sqft

C. Main Field and Flashings EnergySmart (white), initial reflectivity of 0.83, initial emissivity 0.90, and a solar reflective index (SRI) of >104.

D. Wall/Curb Flashing

1. Sarnafil G410 Membrane

A fiberglass reinforced membrane adhered to approved substrate using Sarnacol adhesive. Consult Product Data Sheets for adhesive options and additional information.

- OR -

2. Sarnaclad

A PVC-coated, heat-weldable sheet metal capable of being formed into a variety of shapes and profiles. Sarnaclad is a 25 gauge, G90 galvanized metal sheet with a 20 mil (1 mm) unsupported Sarnafil membrane laminated on one side. The dimensions of Sarnaclad are 4 ft x 8 ft (1.2 m x 2.4 m) or 4 ft x 10 ft (1.2 m x 3.0m). Consult Product Data Sheet for additional information.

E. Perimeter Edge Flashing

1. Sarnaclad

A PVC-coated, heat-weldable sheet metal capable of being formed into a variety of shapes and profiles. Sarnaclad is a 25 gauge, G90 galvanized metal sheet with a 20 mil (1 mm) unsupported Sarnafil membrane laminated on one side. The dimensions of Sarnaclad are 4 ft x 8 ft (1.2 m x 2.4 m) or 4 ft x 10 ft (1.2 m x 3.0m). Consult Product Data Sheet for additional information

F. Membrane Fasteners

1. Sarnadisc-XPN

A high strength linear plate used with a Sarnafastener to attach Sarnafil S327 roof membrane to steel, wood or concrete roof decks. Sarnadisc-XPN is an 18 gauge (1.2 mm), 1½ inch by 3¾ inch (38 mm x 95 mm) corrosion resistant steel plate. Consult Product Data Sheet for additional information.

City of Beverly Hills – Public Works Warehouse PVC Thermoplastic Membrane Roofing - 075419 - 2

G. Flashing Adhesive

1. Stabond U148A Adhesive

A low VOC reactivating-type adhesive used to attach membrane to flashing substrate. Consult Product Data Sheets for additional information.

H. Walkway Protection

1. Crossgrip Walkway

A rolled-out walkway protection mat used to protect Sarnafil roofing membrane from mechanical abuse. Crossgrip Walkway is 9/16 inch (14 mm) thick flexible PVC with a heavily textured surface. Crossgrip Walkway is loose laid on top of completed Sarnafil roof assemblies. Where design windspeeds exceed 94 mph (150 km/h) the walkway must be secured with loops of Sarnafil membrane welded to the field sheet. Consult Product Data Sheet for additional information.

I. Sealants

1. Sarnafil Multi-Purpose Sealant

SECTION 08110

STEEL DOORS AND FRAMES

PRODUCTS: 2.01 Products equal to Steelcraft: www.steelcraft.com A. Doors:

1. Type L-Series, seamless, 16 ga., welded face; hot-dipped galvanized, smooth

texture. Exterior: Factory primed for field painting. Include weatherstripping and flat security type astragals.

2. Exterior Door Type A - 16 series stile and rail (Door Type B – See Drawings). 16-ga., 14 ga. Bottom channel, 16 ga. Rails. Finish: See above.

B. Frames: Fully welded, seamless with joints filled, 16 ga. Exterior Frames: Hot-dipped galvanized Finish: Factory primed, field painted

City of Beverly Hills – Public Works Warehouse Steel Doors and Frames – 08110 - 1

SECTION 08211

FLUSH WOOD DOORS

MATERIALS: Manufacturer: Equal to Marshal Field Door Systems Face: Use 3 mm (1/8”) thick laminate equal to Wilsonart Products Edges: Hardwood sealed Core: 17 lb. density agri-fiber rapidly renewable material Crossbands: No urea-formaldehyde high-density fiberboard Fire Rating: Use fire-rated laminate. Refer to Drawings for required door ratings.

City of Beverly Hills – Public Works Warehouse Flush Wood Doors – 08211 - 1

SECTION 08300

ELEVATOR DOOR SMOKE-CONTAINMENT SYSTEM

PRODUCTS: 2.01 Manufacturer: Smoke Guard, www.smokeguard.com Model # 600

City of Beverly Hills – Public Works Warehouse Elevator Door Smoke-Containment System – 08300 - 1

SECTION 08331

OVERHEAD COILING DOOR

PRODUCTS: 2.01 Acceptable Manufacturer: A. Cookson Company. Telephone: (562) 531-2576 2.02 Materials and Components

A. The door shall be constructed of interconnected strip aluminum slats, thickness and size as required for opening size.

B. Finish shall be bronze anodized and painted to match on all other exposed

components. C. Full weather strip.

2.03 Operation A. Motorized.

City of Beverly Hills – Public Works Warehouse Overhead Coiling Door - 08331 - 1

SECTION 08520

ALUMINUM WINDOWS

PRODUCTS: 2.01 Acceptable Manufacturer: Kawneer. Telephone: (760) 712-2624 2.02 Materials and Components A. Provide Kawneer Trifab VG451 – Backglass –Plane Flush-glazed from inside with 2” sightlines and 4 ½” frame depth 2.03 System Finish

A. All exposed surfaces shall receive Kawneer Classic Bronze Permafloor Architectural Finish.

City of Beverly Hills – Public Works Warehouse Aluminum Windows - 08520 - 1

SECTION 08800

GLAZING

PRODUCTS: 2.01 Acceptable Manufacturer: PPG Architectural Glass. Telephone: (888) 774-4332 2.02 Materials and Components A. Glass Types Type 1: Typical Vision Glass, location as noted in the Drawings. 1” dual-glazed, Solarban 60 Starphire, clear glass Type 2: Spandral, location as noted in the Drawings.

1” dual-glazed, Solarban 60 Starphire, clear outside face and interior surface, acid-etched (PPG – Walker Textures Opaque)

B. All spacers, sealants and gaskets to be black.

City of Beverly Hills – Public Works Warehouse Glazing - 08800 - 1

SECTION 08920

GLAZED CURTAIN WALL SYSTEM

PRODUCTS: 2.01 Acceptable Manufacturer: A. Kawneer. Telephone: (760) 712-2624 2.02 Materials and Components

A. Provide Series 1600 Wall System 2, Structural Silicone Glazed (SSG) Curtain Wall – Ribbon Wall System by Kawneer.

B. Aluminum profile to have 2 ½” sight line, 7 ½” depth and include a 4 ¾” (804-736)

optional cover at all horizontal frames. The framing system shall provide at all vertical edges a flush, continuous glass appearance to tie outside at 90° outside corner, achieved with offset glazing gasket.

2.03 System Finish

A. All exposed surfaces shall receive Kawneer Classic Bronze Permafloor Architectural Finish.

B. All glazing spacers, sealants and gaskets to be black finish.

City of Beverly Hills – Public Works Warehouse Glazed Curtain Wall System - 08920 - 1

SECTION 09220

PORTLAND CEMENT PLASTER

PRODUCTS: 2.01 Acceptable Manufacturer:

A. La Habra Stucco Solutions. Telephone: (866) 516-0061 2.02 Materials and Components

A. Integral Color 30/30 Light Sand plaster finish on CMU, three-coat system. Color: To be determined. B. Three-coat plaster finish by La Habra with final finish coat. “Parex Image Smooth

Finis” acrylic polymer-based finish. Color: To be determined.

City of Beverly Hills – Public Works Warehouse Portland Cement Plaster - 09220 - 1

SECTION 09260

GYPSUM BOARD ASSEMBLIES

PRODUCTS: 2.01 Metal Framing Materials 2.02 Gypsum Board Materials Manufacturer: Equal to USG; product sheet rock

A. Regular Type 1. Thickness: 5/8” B. Fire-Resistant Type 1. Thickness: 5/8”, Type ‘X’ 2. Shaft Wall Assemblies (1-hr. rating) C. Water-Resistant Type 1. Thickness: 5/8” D. Abuse-Resistant Type 1. Thickness: 5/8” E. Ceiling Board, Special Sag-Resistant Type 1. Thickness: 1/2"

City of Beverly Hills – Public Works Warehouse Gypsum Board Assemblies - 09260 - 1

SECTION 09310

Ceramic Tile

PRODUCTS: 2.01 Acceptable Manufacturer:

A. Equal to Daltile, 800.933.Tile Walls: Semi Gloss 4 ½” Group 1 Floors: Unglazed Porcelain, 2”x2” With epoxy grout

City of Beverly Hills – Public Works Warehouse Ceramic Tile - 09310 - 1

SECTION 09512

ACOUSTIC TILE CEILING

PRODUCTS: 2.01 Acoustical Units Type 1: Armstrong Optima – Open plan, tegular, # 3251M (24” x 24” x 1”) 2.02 Suspension System Type 1: Interlude, XL – 9/16” Tee Grid (Armstrong) Type 2: Drywall Grid Suspension System (Armstrong)

City of Beverly Hills – Public Works Warehouse Acoustic Tile Ceiling – 09512 - 1

SECTION 09651

RESILIENT TILE FLOORING

2.01 PRODUCTS: A. Vinyl Tile: Forbo Flooring: www.forbo.com Marmoleum Dual, 13 x 13 inch B. Rubber Tile: Flexco Rubber Co., radial pattern Location: Stair landings C. Rubber Stair Tread Nosing and Risers: Flexco Rubber Co. 1. Stair Treads: Flextred Radial Stair Treads 2. Risers: Type “RSR – 512” risers 3. Skirt D. Adhesive: Flexco “Type 76” epoxy adhesive Comply with California’s mandatory measures for VOC-emission limits

City of Beverly Hills – Public Works Warehouse Resilient Tile Flooring – 09651 - 1

SECTION 09680

CARPET

PRODUCTS: 2.01 Carpet: Shaw Carpet Loop Style, Olefin fiber Color and pattern to be selected Allowance $20.00 per yard, material only (not including contractor markup, tax

and delivery charges) Carpet Adhesive: With VOC limit 50 (California Green Building Standards – 2008, Section 804.4.3. Table 804.4.1)

City of Beverly Hills – Public Works Warehouse Carpet – 09680 - 1

SECTION 09900

PAINTS AND COATINGS

PRODUCTS: 2.01 ICI / Devoe Coatings: (440) 297-8000 Bloxfill 4000 heavy-duty acrylic block filler Comply with state-mandatory measures for VOC-emission limits

City of Beverly Hills – Public Works Warehouse Paints and Coatings - 09900 - 1

SECTION 10170

TOILET COMPARTMENTS

PRODUCTS: 2.01 Manufacturer: Bobrick Washroom Equipment Type: Solid Phenolic Core Duraline Series (1080 Series) Class B, fire-rating Extended aluminum handrails Finish: Selected from manufacturer’s standard color

City of Beverly Hills – Public Works Warehouse Toilet Compartments - 10170 - 1

SECTION 10500

LOCKERS

PRODUCTS: 2.01 Wood construction, custom grade, in accordance with AWI / AWMAC Architectural

Woodwork Quality Standards. Finish: Plastic laminate 3mm (1/8”) thick Equal to Wilsonart Products Panels: Medium density fiber board with moisture-resistant adhesive.

Edge Banding: At all exposed wood edges. Heavy-gauge extended PVC, flat face, smooth finish, self-locking serrated tongue.

Accessories: Cloth rod Adj. shelves (2) Locks (key) Vent Louvers (top and bottom) Number Tags

City of Beverly Hills – Public Works Warehouse Lockers -10500 - 1

SECTION 10605

WIRE-MESH PARTITIONS

PRODUCTS: 2.01 Manufacturer: Equal to King Wire Partitions: www.kingwireUSA.com Model # Heavy Duty, K-406

City of Beverly Hills – Public Works Warehouse Wire-Mesh Partitions - 10605 - 1

SECTION 107113

Architectural Sunshades

PRODUCTS: 2.01 Manufacturer: ASCA, Inc. (603)433-6700, Equal to; Model#CH-3470 Finish: Flurocarbon 2-coat system

City of Beverly Hills – Public Works Warehouse Architectural Sunshades - 107113 - 1

SECTION 13000

SOLAR COLLECTORS

PRODUCTS: 2.01

A. Solar Panels: Solyndra 100 Series. Cylindrical ceilings cells mounted on non-penetrating self-ballast supports. Quantity and capacity to be determined.

City of Beverly Hills – Public Works Warehouse Solar Collectors - 13000 - 1

SECTION 14240

HYDRAULIC ELEVATOR

PRODUCTS: 2.01

A. Freight Elevator 9,000 #, Class “C-1” Power Supply: See Drawings Wall Finish: Brushed stainless steel Floor Finish: Rubber tile B. Passenger Elevator 2,000 #, 100 fpm. Comply with ADA and California Title 24 requirements Floor Finish: Vinyl Tile Wall Finish: Plastic laminate finish panels, with ½” black reveal 3-sides Drop Ceiling: Metal ceiling tile and suspension system Handrail: 1 ½” stainless steel # 4 at rear wall Ceiling Height: 10’ – 0” Accessories: Hooks and vinyl-covered pad Card-key access to Basement Level – for limited usage Power Supply: See Drawings

City of Beverly Hills – Public Works Warehouse Hydraulic Elevator - 14240 - 1