outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and...
Transcript of outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and...
![Page 1: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/1.jpg)
![Page 2: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/2.jpg)
NANOLEDWALK-OVER
WALL RECESSED
DOWN LIGHT
Simes presents MAY-DAY, a very slim stainless steel dimmable bollard with a 24V LED light source.The top of the bollard is charachterised by a rectangular-shaped polycarbonate opal diffuser which emits a soft light effect.Its minimalist design is further enhanced by the absence of visible screws; it is particularly suitable for signal lighting in residential areas.
NANOLED is a tiny, 24V dimmable LED fitting, presented in three versions: walk-over, wall-recessed and as a down light, all characterised by a stainless steel front ring without any visible screws.The walk-over version comes with a clear diffuser and narrow beam, or opal diffuser and 25° beam. The wall-recessed version has an asymmetric diffuser diverting the light downwards towards the ground.Both versions can be used for signal lighting purposes.The down light version, for more decorative applications, has an opal diffuser that creates suggestive light spots recessed into the ceiling.
MAY-DAYBOLLARDS
BOLLARDS
WALL RECESSED
MEGABLINKER MEGABLINKER completes the already popular Blinker range. It is available as a wall-recessed fitting or bollard, supplied with 35W metal halide light sources or 10 accent LEDs, both designed for soft, discrete illumination of walkways, passages and stairs.Megablinker is perfectly flush with the wall or the bollard’s surface: this, together with its essential design without any visible screws, greatly enhance the lighting effects.The light beams are uniform and glare-free and offer visual comfort, creating a cosy and welcoming atmosphere.
MICROREEF LED BOLLARD
BOLLARDS The versatile Microreef is now available as a class II short bollard. Supplied with LED light sources and a special reflector which emits perfectly defined and glare-free light beams, MICROREEF BOLLARD is perfect to create light patterns at ground level in residential areas, parks and walkways.Available in 3 versions (with 180°, 2 x 90° and 360° windows) it further extends the potential applications of this range.
MINICUBIKS LED
BOLLARDS MINICUBIKS is a new, smaller LED bollard which extends the minimalist Cubiks range, maintaining its essential design, robustness and excellent lighting performances. Thanks to a reeded polycarbonate diffuser, the light beam is perfectly uniform even in correspondence to the corners of the bollard.Driven at 700mA and equipped with 4 accent LEDs, this class II luminaire has an energy consumption of only 10W.
POOL SPOTSUBMERSION Three new submersion spotlights for freshwater applications complete the Pool range, for decorative illumination of fountains, waterfalls and water jets.Available in monochromatic and RGB versions, POOL SPOT can shape water with suggestive light effects and colours.
New products 2010-2011
![Page 3: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/3.jpg)
WALL MOUNTED
LOFTSPOT LIGHTS The LOFT SPOT range offers an additional solution to spotlight applications: MEGALOFT, supplied in LED and metal halide sources, extends the spotlight range thanks to its narrow beam or asymmetric wall wash effect.LOFT LED has been restyled: the small dimensions of the LED circuit allow for a significant reduction in size of this fitting which now has a more discrete style.
LED TUBE is an adjustable modular luminaire specifically designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the illumination of very wide surfaces.
LED ROD is versatile and almost invisible, perfect for the illumination of niches and windows.Both luminaires can be cut to size and therefore offer maximum flexibility of application.
MINILIFT LEDWALL EFFECTS MINILIFT LED is the most recently developed fitting of this product range.This class II fitting comes in several versions with 2 or 4 windows, with wide or narrow beams.The aluminium body houses 2 or 4 accent LEDs, one for each window; the narrow beam version houses a methacrylate lense that emits a perfectly designed light beam and suggestive patterns on walls and façades.
STELOBOLLARDS Supplied in 70W metal halide source, STELO is an elegant tall bollard with clean lines specifically suitable for pedestrian areas, town centres and parks.The die-cast and extruded aluminium housing is extremely robust and the policarbonate diffuser is resistant against thermal shock. The light beam it produces assures glare-free illumination with an interdistance of at least 10 metres between each bollard.
MEGAFOCUS LED POLE
POLE-TOP Energy saving and visual comfort are the main characteristics of MEGAFOCUS LED POLE, a pole-top luminaire that combines robustness, clean cut design and user friendly features.The efficient LED light sources are specifically designed for visual comfort in pedestrian areas, parks, and cycle paths.
ROTATINGLED TUBE
LED ROD
New products 2010-2011
![Page 4: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/4.jpg)
4
POOL SPOT
![Page 5: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/5.jpg)
5
The LED fittings are supplied with extensive lenses for an even light distribution.
The reinforced polypropylene housing ensures resistance against chlorides and acids.The reduced thickness of the body allows for efficient heat dissipation, while the support ribs improve the mechanical resistance.
The stainless steel 316L front ring not only ensures an efficient protection against water infiltration but also confers a very attractive appearance to the fitting.The support bracket is in stainless steel painted white with a double paint treatment using epoxy and polyester powders.
POOL SPOT
POOL SPOT requires a FLANGE accessory to anchor the fitting to the bottom of pools or fountains. The stainless steel flange is supplied with fastening screws, both for fixing the fitting to the flange and for the anchorage to the bottom of the pool.Should the fixation with screws be impossible, the weight of the accessory still allows to keep the luminaire sitting on the bottom of the pool.
The POOL range is supplied with brass cable glands that guarantee excellent resistance against corrosion, which is an essential characteristic for a submerged fitting.All POOL SPOT versions are supplied with a pre-wired flexible cable in order to facilitate the installation and assure the IP68 protection rating.
![Page 6: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/6.jpg)
6
POOL SPOT
Technopolymer housing.Marine grade stainless steel AISI 316L front trim 2 mm thick.Toughened transparent glass 4 mm thick.Single cable entry with M20 brass cable gland.Luminaire hard wired with 6 m H07RN-F cable for MICROPOOL and MINIPOOL, 8m for POOL.Stainless steel screws.Silicone gaskets.ACCENT LED radiation in class 2.LED versions supplied with LED circuit without transformer.IP68 3m
CLASS III IK 08
The luminaire cannot be installed out of the water.Not suitable for submersion in sea water.
FINISHING:
Stainless steel / White (code .19)
REMOTE DMX CONTROLLERDedicated Infrared remote controller for the DMX Controller S.3491
24 V d.c. 24 V d.c.
24 V PWM
JUNCTION BOX*Junction box IP65 with cable glands for 3 cables IN (possibility of 3 more cables IN with S.3670 accessories)maximum load capacity 500KgDimensions 300mm x300mm x230mm
JUNCTION BOX WITH POWER SUPPLY monochromatic led 22W 240V/24V d.c. IP65 power supply for:N°3 Micropool LED*N°1 Minipool LEDDimensions 200mm x200mm x220mm
JUNCTION BOX WITH POWER SUPPLYmonochromatic led 70W 240V/24V d.c. IP65 power supply for:N°4 Minipool LED**N°2 Pool LEDDimensions 300mm x300mm x230mm
JUNCTION BOX WITH RGB POWER SUPPLYRGB led 22W 240V/24V PWM IP65 power supply for:N°2 Micropool LED RGBN°1 Minipool LED RGBDimensions 200mm x200mm x220mm
*1 ADDITIONAL CABLE GLANDRequired for the connection of over 2 luminaires to the junction box /power supply.
DMX CONTROLLERStandalone wall DMX controller for RGB LED fittings. Allows to control 2 groups of fittings but they cannot work in a synchronized way.Optional Remote Control S.3492 is available.Requires remote power supply 240V/24V d.c. (type S.3401)
JUNCTION BOX WITH RGB POWER SUPPLYRGB led 70W 240V/24V PWM IP65 power supply for:N°3 Minipool LED RGB*N°2 Pool LED RGBDimensions 300mm x300mm x230mm
24 V PWM
FLANGE for MICROPOOL and MINIPOOL SPOTFixation base plate for Micro-and Minipool Spot installation.Weight of the flange: Kg 1
FLANGE for POOL SPOTFixation base plate forPool Spot installation.Weight of the flange: Kg 5
S.3664 S.3665
S.3668
S.3491 S.3492
S.3667
S.3660S.3670
S.3671 S.3672
![Page 7: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/7.jpg)
7
Ø 95
185
145
Ø 150
220
115
Ø 220135
300
20°
40°
40°
40°
35°
35°
35°
35°h(m) Ø(m) E(lx)
2 1.30 5384 2.60 1346 3.90 608 5.20 3410 6.50 222150 cd/klm
20°h(m) Ø(m) E(lx)
1 0.39 2132 0.77 533 1.16 244 1.54 135 1.93 9213 cd/klm
20°
20°
40°h(m) Ø(m) E(lx)
1 0.76 7012 1.53 1753 2.29 784 3.05 445 3.82 28701 cd/klm
MINIPOOL SPOT
POOL SPOT
MICROPOOL SPOT
With 1 accent led in warm white 3200K2,5W 24V with 30° extensive beam lensRequires remote power supply 240V/24V d.c.(type S.3664 or S.3665)
With 1 accent led in blue2,5W 24V with 30° extensive beam lensRequires remote power supply 240V/24V d.c.(type S.3664 or S.3665)
With accent leds RGB 3,6W 24V PWM(3 channels x 1,2W)Requires remote power supply 240V/24V PWM (type S.3667 or S.3668) Requires DMX remote control (type S.3491) or DALI
With 7 accent leds in warm white 3200K14W 24V with 38° extensive beam lensRequires remote power supply 240V/24V d.c.(type S.3664 or S.3665)
With 7 accent leds in blue14W 24V with 38° extensive beam lensRequires remote power supply 240V/24V d.c.(type S.3664 or S.3665)
With 7 accent leds RGB 12W 24V PWM(3 channels x 4W)Requires remote power supply 240V/24V PWM (type S.3667 or S.3668) Requires DMX remote control (type S.3491) or DALI
POOL SPOT
With 19 accent leds in warm white 3200K35W 24V with 38° extensive beam lensRequires remote power supply 240V/24V d.c.(type S.3665)
With 19 accent leds in blue35W 24V with 38° extensive beam lensRequires remote power supply 240V/24V d.c.(type S.3665)
With 19 accent leds RGB 30W 24V PWM(3 channels x 10W)Requires remote power supply 240V/24V PWM (type S.3667) Requires DMX remote control (type S.3491) or DALI
Photometric measured using WARM WHITE LED 3200K
Photometric measured using WARM WHITE LED 3200K
Photometric measured using WARM WHITE LED 3200K
S.3676W.19
S.3678.19
S.3675.19
S.3688.19
S.3686W.19
S.3685.19
S.3698.19
S.3696W.19
S.3695.19
![Page 8: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/8.jpg)
8
NANOLED
![Page 9: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/9.jpg)
9
NANOLED
The in-ground versions are supplied with polypropylene recessing box.The box is characterized by a housing that keeps the corrugated conduit in position.
The recessing box supplied with the wall recessed versions is 125mm deep, but its depth can be reduced to 95mm for the installation in narrow walls.
The down light versions are supplied with clips for installation in false-ceilings.
NANOLED has been developed from the base of a fast connector.
The front ring and lamp body are cast together as a single piece thus preventing any infiltrations from the top of the fitting.
NANOLED is supplied with a 24V/230mA converter for parallel connection of the fittings: this allows to identify the damaged fitting in case of malfunction.
The electronic circuit is dimmable (with the use of the remote power supply S.3402) thanks to the PWM technology (pulse with modulation) and remote power supply.
NANOLED patent pending Simes 2010
![Page 10: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/10.jpg)
10
Polycarbonate structure and diffuser.Marine grade stainless steel AISI 316 front ring 2 mm thick.Luminaire supplied with fast connector.The polycarbonate body is cast together with the stainless steel ring as a single piece.Absence of screws (the luminaire isfixed to the recessing box through clips).Recessing box in polypropylene.Down-light version supplied with clips for installation in false-ceilings 5÷20mm thick with a Ø 40 mm hole.ACCENT LED radiation in class 2.LED versions supplied with LED circuit, power supply not included.IP67CLASS III IK 09
FINISHING:
Stainless steel (code 19)
Maximum weight 1000 Kg LED RED, LED AMBER and LED GREENavailable on request
SIMPLE REMOTE POWER SUPPLY10W 240V/24V DC for parallel connection for 6 NANOLED10W 24V DC power supplyDimensions 120mm x35mm x20mmIP20
The recessing box must be placed at ground level.20 cm drainage gravel must be used under the recessing box to allow easy water evacuation.Connection to the main line has to be done into junction boxes.
SIMPLE REMOTE POWER SUPPLY10W 240V/24V for parallel connectionfor 6 NANOLEDIP55 box with 10W power supply 240V/24V DCDimensions 200mm x200mm x90mm
NANOLED
REMOTE POWER SUPPLYDIMMABLEfor monochromatic LED 20W240V/24V DC dimmable 1-10V or PUSH BUTTONIP20Dimensions 103 x67mm x21mm
S.3400
S.3401
S.3402
![Page 11: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/11.jpg)
11
min Ø 35max Ø 40
Ø 455÷20
90
Ø 45
125
3
Ø 4
5
95 / 125 3
Ø 3
2
Ø 32
+
125
95
Ø 4
0
h(m) E(lx) 10°2.5 2
2 61.5 7
1 90.5 5
0.1 m 0(m)
25251 cd/klm
5 cd/klm
H=0.1 m
lux
10°
25°25°
h(m) Ø(m) E(lx)
1 0.44 106 2 0.89 27 3 1.33 12 4 1.77 7 5 2.22 42762 cd/klm
T 40°C C5
T 40°C C5
T 40°C C5
C0 5°+29° C90 00°
=24°
WALK OVER - Transparent diffuser
With 1 accent led in cold white 6650K 1,25W 24VRequires remote power supply 240V/24V DC (type S.3401 or S.3402)
DOWN LIGHT - Opal diffuser
WALL RECESSED - Transparent diffuser with asymmetric light distribution
With 1 accent led in warm white 3200K 1,25W 24VRequires remote power supply 240V/24V DC (type S.3401 or S.3402)
With 1 accent led in blue 1,25W 24VRequires remote power supply 240V/24V DC (type S.3401 or S.3402)
With 1 accent led in cold white 6650K 1,25W 24VRequires remote power supply 240V/24V DC (type S.3401 or S.3402)
With 1 accent led in warm white 3200K 1,25W 24VRequires remote power supply 240V/24V DC (type S.3401 or S.3402)
With 1 accent led in blue 1,25W 24VRequires remote power supply 240V/24V DC (type S.3401 or S.3402)
With 1 accent led in cold white 6650K 1,25W 24VRequires remote power supply 240V/24V DC (type S.3401 or S.3402)
With 1 accent led in warm white 3200K 1,25W 24VRequires remote power supply 240V/24V DC(type S.3401 or S.3402)
With 1 accent led in blue 1,25W 24VRequires remote power supply 240V/24V DC (type S.3401 or S.3402)
Version with 25° opal diffuser on request
Version with 10° transparent diffuser on request
Photometric measured using COLD WHITE LED 6650K
Photometric measured using COLD WHITE LED 6650K
Photometric measured using COLD WHITE LED 6650K
NANOLED
S.3240.19
S.3240W.19
S.3241.19
S.3250.19
S.3250W.19
S.3251.19
S.3260.19
S.3260W.19
S.3261.19
![Page 12: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/12.jpg)
12
MAY-DAY
![Page 13: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/13.jpg)
13
MAY-DAY
The bollard structure and base of MAY-DAY are in AISI 316L stainless steel, characterized by high corrosion resistance.An opal acrylic diffuser does not transmit the light in a uniform way.A clear laser treated acrylic diffuser maintains its clear transparent internal core, and the external finish is laser treated opal thus optimizing the uniform light distribution throughout the complete diffuser.
The acrylic diffuser and polycarbonate body are cast together as a single piece, thus preventing any water infiltrations from the top.
MAY-DAY has been developed on the base of the fast connector on which the LED circuit is installed.
![Page 14: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/14.jpg)
14
Marine grade stainless steel AISI 316L structure 1,5 mm thick.Laser-etched acrylic opal diffuser.Stainless steel screw, absence of screws in sight.Luminaire supplied with fast connector.LED radiation in class 1.LED versions supplied with LED circuit, power supply not included.IP66CLASS III IK 09
FINISHING:
Stainless steel (code 19)
LED RED, LED AMBER and LED GREENavailable on request
MAY-DAY
FLANGE ACCESSORY Flange to be fixed in concrete with stainless steel screws for fixing in the ground.
SIMPLE REMOTE POWER SUPPLY10W 240V/24V DC for parallel connection for 6 MAY-DAY10W 24V DC power supplyDimensions 120mm x35mm x20mmIP20
SIMPLE REMOTE POWER SUPPLY10W 240V/24V for parallel connectionfor 6 MAY-DAYIP55 box with 10W power supply 240V/24V DCDimensions 200mm x200mm x90mm
S.3400
S.3401
S.3229
![Page 15: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/15.jpg)
15
800
35
75
With 1 led in cold white 6650K1,25W 24VRequires remote power supply240V/24V DC (type S.3401)
With 1 led in warm white 3200K1,25W 24VRequires remote power supply240V/24V DC (type S.3401)
With 1 led in blue 1,25W 24VRequires remote power supply240V/24V DC (type S.3401)
MAY-DAY
MAY-DAY h 80cm
S.3220.19
S.3220W.19
S.3221.19
![Page 16: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/16.jpg)
16
MINICUBIKS LED
![Page 17: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/17.jpg)
17
MINICUBIKS LED
The examples show the difference between a standard glass and a reeded lens used in the CUBIKS. The reeded glass diffuser produces a perfectly even light distribution in correspondence to the corners of the bollard thus reducing the shadow areas.CUBIKS combines design, solidity and excellent lighting performances.
STANDARD GLASS REEDED GLASS
SHADOW
LIGHT
The 4 LED circuits have been developed around an anodized aluminium x-shaped structure, specifically designed to house one LED circuit for each window of the bollard.This structure combined to the LED circuit is an efficient heat dissipator.
The diffuser is a single piece of waterproof polycarbonate that assures a good mechanical resistance.
MINICUBIKS LED is pre-wired and supplied with an IP67 fast connector that makes installation easy and quick.
![Page 18: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/18.jpg)
18
SPECIAL VERSIONS:
On request MINICUBIKS LED bollards can be supplied also in 1 WINDOW version or 2 WINDOWS 180° version.
COLOURS:
Aluminium grey (code 14)
Die-cast EN AB-47100 and extruded EN AW-6060 aluminium housing (copper free) with high corrosion resistance.Clear polycarbonate reeded diffuser.Stainless steel screws.Luminaire hard wired with H07RN-F cable.Electrical wiring with fast connector IP67.Silicone gaskets.Double powdered paint in 3 step process:_ surface treatment containing ceramic nano particles (Bonderite); _ epoxy primer paint;_ polyester powder paint with high resistance against UV rays and harsh weather conditions.ACCENT LED with radiation in class 2.LED luminaire supplied with LED circuit board and power supply.IP66CLASS II qIK10
The above mentioned special versions have a perfectly flush surface where no window is provided.
FLANGE ACCESSORY FOR MINIBLINKER120x120mm flange to be fixed in concrete with stainless steel screws for fixing in the ground.
MINICUBIKS LED
LED RED, LED AMBER andLED GREEN available on request
The light distribution is in accordance with light pollution regulations.
S.6099
![Page 19: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/19.jpg)
19
120
550
124 cd/klmWith 4 accent leds in warm white 3200K10W 240V
With 4 accent leds in blue10W 240V
With 4 accent leds in cold white 6650K 10W 240V
MINICUBIKS LED
Computer-simulated photometrics
S.5314W
S.5315
S.5314
![Page 20: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/20.jpg)
20
MICROREEF LED BOLLARD
![Page 21: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/21.jpg)
21
MICROREEF LED BOLLARD
MICROREEF emits a sharp light beam thanks to the optic system that combines an aluminsed polycarbonate conical reflector and a LED light source fixed on top of it supplied at 700mA.The position of the LED placed inside the head allows for better heat dissipation.
The die-cast aluminium head of the bollard is particularly robust.
The structure of MICROREEF LED BOLLARD is obtained from a single piece of extruded aluminium that makes it suitable for those public areas where robustness is an essential characteristic.The flange accessory prevents the bollard from turning over.
The vandal proof polycarbonate diffuser assures optimal mechanical resistance.
![Page 22: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/22.jpg)
22
MICROREEF LED BOLLARD
Die-cast EN AB-47100 and extruded EN AW-6060 aluminium housing (copper free) with high corrosion resistance.Reflector in aluminized polycarbonate.Clear polycarbonate lens.Stainless steel screws.Cable entry with M20cable glands (Ø 8÷12 mm).Silicone gaskets.Double powdered paint in 3 step process:_ surface treatment containing ceramic nano particles (Bonderite); _ epoxy primer paint;_ polyester powder paint with high resistance against UV rays and harsh weather conditions.ACCENT LED with radiation in class 2.LED luminaire supplied with LED circuit board and power supply.IP65CLASS II qIK 10
COLOURS:
FLANGE ACCESSORY FOR GROUND APPLICATIONØ 130 mm flange to be fixed in concrete with stainless steel screws for fixing in the ground.
LED RED and LED GREEN available on request.
Aluminium grey (code .14)
Rusty corten (code .18)
The light distribution is in accordance with light pollution regulations.
S.5301
![Page 23: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/23.jpg)
23
130
385
49
169 cd/klm
124 cd/klm
205 cd/klm
130
385
49
385
49
130
MICROREEF LED BOLLARD
MICROREEF LED BOLLARD 180°
MICROREEF LED BOLLARD 2 x 90°
MICROREEF LED BOLLARD 360°
With 4 accent leds in warm white 3000K10W 240V
With 4 accent leds in blue10W 240V
With 4 accent leds in cold white 6100K 10W 240V
Photometric measured using COLD WHITE LED 6100K
Photometric measured using COLD WHITE LED 6100K
Photometric measured using COLD WHITE LED 6100K
With 4 accent leds in warm white 3000K10W 240V
With 4 accent leds in blue10W 240V
With 4 accent leds in cold white 6100K 10W 240V
With 4 accent leds in warm white 3000K10W 240V
With 4 accent leds in blue10W 240V
With 4 accent leds in cold white 6100K 10W 240V
S.5337W
S.5338
S.5337
S.5327W
S.5328
S.5327
S.5317W
S.5318
S.5317
![Page 24: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/24.jpg)
24
BLINKER
![Page 25: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/25.jpg)
25
MEGABLINKER
The body is totally extractible through a spring lock mechanism; this makes the installation and maintenance easier but such fitting is more suitable for private residential areas that are not exposed to potential vandalism.
The reeded glass diffuser, compared to traditional lenses, produces a more uniform light distribution and improves the side emission.
MEGABLINKER and MEGABLINKER BOLLARD are characterized by an essential design thanks to the absence of front screws and the luminaire which is flush with the wall or the bollard structure.
![Page 26: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/26.jpg)
26
Die-cast EN AB-47100 aluminium housing (copper free) with high corrosion resistance.Extruded EN AW-6060 aluminium structure (bollard version) with high corrosion resistance.Stainless steel screws.Acid-etched glass diffuser.Suitable for double cable entry.Silicone gaskets.Double powdered paint in 3 step process:_ surface treatment containing ceramic nano particles (Bonderite); _ epoxy primer paint;_ polyester powder paint with high resistance against UV rays and harsh weather conditions.ACCENT LED radiation in class 2.Lamp not included.LED versions are supplied with LED circuit.IP65CLASS IIK 06
COLOURS: The light distribution is in accordance with light pollution regulations.
MEGABLINKER
Aluminium grey (code 14)
Rusty corten (code 18)
RECESSING BOX for MEGABLINKER187 x 433 mmDepth 170 mmAll BLINKER wall recessed luminaires must be installed with the recessing box for outdoor application.Recessing box must be perfectly installed at the wall level.
FLANGE ACCESSORY FOR MEGABLINKERØ 180 mm flange to be fixed in concrete with stainless steel screws for fixing in the ground.
S.6023
S.5310
![Page 27: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/27.jpg)
27
1100
180
165
402
323
157
194 cd/klm
268 cd/klm
194 cd/klm
H = 0.6 m
H = 0.6 m
268 cd/klm
MEGABLINKER
For lamp HIT-TC CRI 35W G8,5 3300 lmWith electronic ballastRecessing box not included
Photometric measured using COLD WHITE LED 6650KWith 10 accent leds in warm white 3200K25W 240VRecessing box not included
With 10 accent leds in cold white 6650K 25W 240VRecessing box not included
MEGABLINKER
With 10 accent leds in blue 25W 240VRecessing box not included
For lamp HIT-TC CRI 35W G8,5 3300 lmWith electronic ballast
With 10 accent leds in warm white 3200K25W 240V
With 10 accent leds in cold white 6650K 25W 240V
With 10 accent leds in blue 25W 240V
MEGABLINKER BOLLARD h 1100mm
Photometric measured using COLD WHITE LED 6650K
S.6027
S.6020W
S.6020
S.6022
S.6047
S.6040W
S.6040
S.6042
![Page 28: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/28.jpg)
28
MINILIFT LED
![Page 29: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/29.jpg)
29
MINILIFT LED
The methacrylate concentrating lens, combined to the narrow beam window, creates perfectly designed blades of light.
In order to obtain a wide beam, just remove the concentrating lens and the and the narrow beam shutter.
MINILIFT LED combines state of the art technology and reduced dimensions (120mm x 120mm x h 130mm) in a class II with a minimalistic design.
Each window houses a 2,5W accent LED installed on a black painted aluminium support, which helps dissipate the heat produced by the LED.
Easy and quick installation: after fixing the base to the wall, just connect it to the lamp body through a fast connector.
![Page 30: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/30.jpg)
30
Die-cast EN AB-47100 aluminium housing (copper free) with high corrosion resistance.Clear thoughened glass.Stainless steel screws.Double cable entries.Silicone gaskets.Double powdered paint in 3 step process:_ surface treatment containing ceramic nano particles (Bonderite); _ epoxy primer paint;_ polyester powder paint with high resistance against UV rays and harsh weather conditions.ACCENT LED with radiation in class 2.LED luminaire supplied with LED circuit board and transformer.IP65CLASS II qIK06
COLOURS:
MINILIFT LED
Aluminium grey (code 14)
Rusty corten (code 18)
LED RED, LED AMBER andLED GREEN available on request
![Page 31: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/31.jpg)
31
120
140
130
120
120
140
130
120
120
140
130
120
MINILIFT LED
With 2 accent leds in warm white 3200K 5W 240V
With 2 accent leds in blue 5W 240V
With 2 accent leds in cold white 6650K 5W 240V
With 2 accent leds in warm white 3200K 5W 240V
With 2 accent leds in blue 5W 240V
With 2 accent leds in cold white 6650K 5W 240V
With 4 accent leds in warm white 3200K 10W 240V
With 4 accent leds in blue 10W 240V
With 4 accent leds in cold white 6650K 10W 240V
Computer-simulated photometrics
Computer-simulated photometrics
Computer-simulated photometrics
S.5097
S.5097W
S.5098
S.5027
S.5027W
S.5028
S.5037
S.5037W
S.5038
![Page 32: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/32.jpg)
32
ROTATING LED TUBELED ROD
![Page 33: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/33.jpg)
33
TRS
10 cm
~ 5 cm
ROTATING LED TUBE / LED ROD
The LED circuit and aluminium profile of the ROTATING LED TUBE and the LED ROD can be easily cut to size.The aluminium profiles can be shortened by using a small hacksaw.The length of the LED circuit can be cut in 10 cm sections or multiples thereof. After snapping the circuit with nippers it is imperative to re-position it in the center of the aluminium profile in order to obtain an optimal lighting effect.Example: in case of a window frame with 87 cm width, the 1 m rod will be cut to 87 cm while the LED strip will be cut to 80 cm (by clipping off the end opposite to the supply cable entry) and re-position the circuit into the center of the rod so to obtain a uniform distribution of light.
240V 24V
The polycarbonate diffuser of the ROTATING LED TUBE is fastened to the aluminium base through a lock mechanism.The surface of the diffuser has a reeded half and a clear half: the diffuser rotates inside the aluminium base, therefore allowing to choose a direct or diffused light distribution.
The transparent silicone cap guarantees an excellent light transmission.
If installed at a distance of 5 cm from the wall, the light distribution of the ROTATING LED TUBE will be uniform, without shadows even in correspondence to the junction between the two fittings.
The connection scheme of the ROTATING LED TUBE through the END CAP accessory: the end cap allows for parallel connection of up to 5 fittings.
TUBOLED patent pending Simes 2010
![Page 34: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/34.jpg)
34
24V PWM
Anodized aluminium (code 13)
Coextruded polycarbonate diffuser1,5 mm thick with a 50 μm protective layer against UV rays.Transparent silicone end caps.Fixing base in extruded anodizedEN AW-6060 aluminium housing (copper free) with high corrosion resistance.Stainless steel screws.Circuit equipped with a through supply system for parallel connection up to a maximum of 5 fittings in line.ACCENT LED radiation in class 2.Luminaires supplied with LED circuit without transformer.IP65CLASS III IK 08
COLOUR: REMOTE POWER SUPPLYfor monochromatic LED 100VA240V/24V DC to connect max 5 fittingsIP67Dimensions 230mm x65mm x40mm
END CAP WITH SUPPLY CABLEOnly for monochromatic LED.Silicone end cap with piece of cableto supply the following fitting withparallel connection.
ROTATING LED TUBE
REMOTE RGB PWM POWER SUPPLY100W 240V/24V PWM for 3 Rotating LED Tube RGBIP55 box with 100W power supply (33W for 3 channels) 240V/24V PWM controlled by DMX or DALI protocolDimensions 340mm x300mm x130mm
END CAP WITH SUPPLY CABLEOnly for RGB version.Silicone end cap with piece of cableto supply the following fitting withparallel connection.
REMOTE DMX CONTROLLERDedicated Infrared remote controller for the DMX Controller S.3491
DMX CONTROLLERStandalone wall DMX controller for RGB LED fittings. Allows to control 2 groups of fittings but they cannot work in a synchronized way.Optional Remote Control S.3492 is available.Requires remote power supply 240V/24V d.c. (type S.3401)
S.3407 S.3408
S.3413 S.3409
S.3491 S.3492
![Page 35: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/35.jpg)
35
1000
Ø 44
48
h(m) E(lx)2.5 1 1 1 02.0 2 5 1 11.5 4 3 2 11.0 15 8 3 10.5 120 25 2 0
0.12 m 0 0.5 1.0 1.5 (m)
163 cd/klm
h(m) E(lx)2.5 1 1 1 02.0 2 5 1 11.5 4 3 2 11.0 15 8 3 10.5 120 25 2 0
0.12 m 0 0.5 1.0 1.5 (m)
163 cd/klm
C0 106° C90 104°
C0 106° C90 104°
With 50 accent led in neutral white 4000K 15W 24VAdjustable opticRequires remote power supply240V/24V DC (type S.3407)
ROTATING LED TUBE
ROTATING LED TUBE
With soft leds RGB 24W 24V PWM(3 channels x 8W) Requires remote power supply 240V/24V PWM (type S.3413)Requires DMX control unit (type S.3491) or DALI
Photometric measured using NEUTRAL WHITE LED 4000K
S.5900N
S.5902
![Page 36: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/36.jpg)
36
Fixing base in extruded anodizedEN AW-6060 aluminium housing (copper free) with high corrosion resistance.Polycarbonate diffuser 1,5 mm thick.Transparent silicone end caps.Stainless steel screws.ACCENT LED radiation in class 2.LED versions supplied with LED circuit without transformer.IP55CLASS III IK 08
COLOUR: REMOTE POWER SUPPLYfor monochromatic LED 20W240V/24V DC dimmable 1-10V or PUSH BUTTONIP20Dimensions 103 x67mm x21mm
LED ROD
Anodized aluminium (code 13)
S.3402
![Page 37: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/37.jpg)
37
67 cd/klm h(m) E(lx)2.0 0 0 0 01.6 1 1 0 01.2 2 1 1 00.8 4 3 1 00.4 11 6 1 0
0.15 m 0 0.5 1 1.5 (m)
67 cd/klm h(m) E(lx)2.0 0 0 0 01.6 1 1 1 01.2 2 2 1 10.8 5 4 2 10.4 13 12 2 1
0.15 m 0 0.5 1 1.5 (m)
1000
1500
Ø 22
Ø 22
2424
With 50 accent led in neutral white 4200K 10W 24VRequires remote power supply240V/24V DC (type S.3402)
Computer-simulated photometrics
LED ROD
With 75 accent led in neutral white 4200K 15W 24VRequires remote power supply240V/24V DC (type S.3402)
Computer-simulated photometrics
LED ROD l = 1 mSuitable for window frames up to 1 m
LED ROD l = 1,5 mSuitable for window frames up to 1,5 m
S.5910N
S.5915N
![Page 38: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/38.jpg)
38
LOFT SPOT
![Page 39: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/39.jpg)
39
LOFT SPOT
LED circuit with 5° concentrating lenses.LED cicuit with 25° extensive lenses on request.
The LOFT SPOT supplied with stirrup is adjustable +/- 90° from vertical. It can also be used in garden applications by using the ground stake.
The small dimensions of the LED circuit allow for a significant reduction in size of this fitting which now has a more discreet dimension; all MEGALOFT versions are presented with the new SLIM design.
The asymmetric version is now available also for MEGALOFT SPOT with reduced depth of the fitting.
The tempered front glass diffuser is fixed externally to the fitting through silicon resin, perfectly flush with the front ring. Water and dirt deposits that can disturb the lighting performance of the projector can easily flow away.
The anti-glare shield accessory can be combined to 6° or 16° symmetric versions.
![Page 40: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/40.jpg)
40
330
100
430
180
100
280
LOFT SPOT
COLOURS:
Aluminium grey (code .14)
ELLIPSOIDAL BEAM lens for HIT-TC CE 35W lamp with 5° beam reflector versions
Die-cast EN AB-47100 aluminium housing (copper free) with high corrosion resistance.Stainless steel screws.Clear toughened glass diffuser.Single cable entry with PG13,5 cable gland for LOFT.Double cable entry with PG13,5 cable glands for MEGALOFT on request.Silicone gaskets.Double powdered paint in 3 step process:_ surface treatment containing ceramic nano particles (Bonderite); _ epoxy primer paint;_ polyester powder paint with high resistance against UV rays and harsh weather conditions.ACCENT LED radiation in class 2.Lamp not included.LED versions are supplied with LED circuit board and power supply.IP65CLASS I CLASS II q for MEGALOFTIK 06
ANTI-GLARE SHIELDfor HIT-TC CE 35W lamp with 5° beam reflector versions
ANTI-GLARE SHIELDfor HIT-TC CE 35W lamp with 30° beam reflector versions
ANTI-GLARE SHIELDfor HIT-CRI 70W lamp with 16° and 6° beam reflector versions
ACCESORIES for LOFT SPOT-LIGHT MEGALOFT SPOT-LIGHT STAKE FOR MEGALOFT SPOT-LIGHTIn polypropileneColour: black (code .09)The 100 mm upper part must stay out of the ground level, according with the norms.
STAKE FOR LOFT SPOT-LIGHTIn polypropileneColour: black (code .09)The 100 mm upper part must stay out of the ground level, according with the norms.
S.6639
S.6600
S.6601
S.5505
S.1005S.1004
![Page 41: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/41.jpg)
41
5°h(m) Ø(m) E(lx)
2 0.16 272314 0.32 68086 0.48 30268 0.64 170210 0.80 1089
30°Ø(m) E(lx)
1.03 17582.07 4393.10 1954.14 1105.17 7036308 cd/klm 2244 cd/klm
30°5°
155
90°
90°
310
5°
C0 24°+25° C90 50°
29°
80
90°
90°
235
5°h(m) Ø(m) E(lx)
1 0.09 67522 0.19 16883 0.28 7504 0.38 4225 0.47 27039350 cd/klm
5°
155
90°
90°
310
352 cd/klm
24°+25° 50°h(m) ØC0(m) ØC90(m)
2 1.07+1.71 4.724 2.15+3.42 9.466 3.22+5.13 14.188 4.30+6.84 18.5010 5.37+8.55 23.64
E(lx)
29074331812
LOFT SPOT SYMMETRIC
LOFT FLOOD ASYMMETRIC
LOFT SPOT
With 4 accent leds in warm white 3200K8W 240V with 5° narrow beam lens
With 4 accent leds in blue8W 240V with 5° narrow beam lens
25° extensive beam lens LED circuits are available on request
With 4 accent leds in cold white 6650K 8W 240V with 5° narrow beam lens
Photometric measured using COLD WHITE LED 6650K
LOFT SLIM SPOT LED
For lamp HIT-TC CE 35W PGJ5 3000 lm(On request 30° beam reflector) Version for lamp 20W 1700 lm on request
For lamp HIT-TC CE 35W PGJ5 3000 lm Version for lamp 20W 1700 lm on request
S.6694
S.6643W
S.6644
S.6643
S.6699
![Page 42: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/42.jpg)
42
352 cd/klm
24°+25° 50°h(m) ØC0(m) ØC90(m)
2 1.07+1.71 4.724 2.15+3.42 9.466 3.22+5.13 14.188 4.30+6.84 18.5010 5.37+8.55 23.64
E(lx)
638163
734026
5°
C0 24°+25° C90 50°
29°
26209 cd/klm
5°h(m) Ø(m) E(lx)
2 0.19 36084 0.38 9026 0.57 4028 0.75 22710 0.94 14539350 cd/klm
16°3445 cd/klm
16° 6°h(m) Ø(m) E(lx) Ø(m) E(lx)
4 1.07 1378 0.36 12135 8 2.13 345 0.73 3034 12 3.20 153 1.09 1348 16 4.27 86 1.45 758 20 5.34 55 1.82 485
120
90°
90°
385
120
90°
90°
385
120
90°
90°
385
MEGALOFT SLIM SPOT LED
MEGALOFT SPOT
MEGALOFT SLIM FLOOD ASYMMETRIC
With 9 accent leds in warm white 3200K18W 240V with 5° narrow beam lens
With 9 accent leds in blue18W 240V with 5° narrow beam lens
25° extensive beam lens LED circuits are available on request
With 9 accent leds in cold white 6650K 18W 240V with 5° narrow beam lens
Photometric measured using COLD WHITE LED 6650K
MEGALOFT SPOT SLIM SYMMETRIC
For lamp HIT-CRI 70W G126600 lm With electronic ballast(On request 6° beam reflector)
For lamp HIT-TC CRI 70W G8,56600 lm With electronic ballast
S.6662W
S.6663
S.6662
S.6668
S.6679
![Page 43: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/43.jpg)
43
E(lx)
638163
734026
![Page 44: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/44.jpg)
44
STELO
![Page 45: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/45.jpg)
45
STELO
STELO is supplied with an inspection door and fuse box.
Easy relamping by opening the pivoting head of the bollard.
The excellent mechanical resistance of the polycarbonate diffuser makes the fitting suitable for those areas at risk of vandalism; the clearness of the diffuser assures a high LOR.On request, STELO can also be supplied with an opal polycarbonate diffuser, for a more diffuse and discreet light distribution.
![Page 46: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/46.jpg)
46
Extruded EN AW-6060 aluminium profile.Die-cast EN AB-44100 aluminium housing (copper free) with high corrosion resistance.Transparent polycarbonate diffuser (opal diffuser on request).Stainless steel screws.Inspection door perfectly flush with the pole surface.Connection box with fuses.Silicone gaskets.Double powdered paint in 3 step process:_ surface treatment containing ceramic nano particles (Bonderite); _ epoxy primer paint;_ polyester powder paint with high resistance against UV rays and harsh weather conditions.Lamp not included.IP65CLASS II qIK10
FLANGE ACCESSORY FOR STELO
Ø 195 mm h 800 mm flange to be fixed in concrete with stainless steel screws for fixing in the ground.
STELO
COLOURS:
Aluminium grey (code .14)
The light distribution is in accordance with light pollution regulations.
S.4129
![Page 47: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/47.jpg)
47
3500
Ø 200
0 3 6 9 1236912
3
6
9
12
259 cd/klm
For lamp HIT-CRI 70W G126600 lm
STELO
Computer-simulated photometricsVersion with opal polycarbonate diffuser on demand.NOTE: the light distribution willbe modified
TRANSPARENT POLYCARBONATE DIFFUSER S.4121
![Page 48: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/48.jpg)
48
MEGAFOCUS POLE LED
![Page 49: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/49.jpg)
49
MEGAFOCUS POLE LED
The MEGAFOCUS pole-top has an internal diameter of 76 mm for installation on standard sized poles.They are supplied with a fast connector that allows easy connection to the mains.
Flat diffuser.Diffuser with a drop down hinge assembly system.Screws with anti-loss washer system.
The new LED version is characterized by a series of LEDs specifically oriented to assure excellent light distribution on the street.
![Page 50: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/50.jpg)
50
6550
Ø 102
Ø 102
Ø 76
150
800
7500
Anthracite grey (code 24)
Die-cast EN AB-47100 aluminium housing (copper free) with high corrosion resistance.Clear toughened glass 8 mm thick.Post top luminaire with Ø 76 mm spigot attachment.Stainless steel screws.Electrical wiring with fast connector.Electronic circuit with temperature sensors for each LED to optimize the lifetime.Silicone gaskets.Double powdered paint in 3 step process:_ surface treatment containing ceramic nano particles (Bonderite); _ epoxy primer paint;_ polyester powder paint with high resistance against UV rays and harsh weather conditions.ACCENT LED radiation in class 2.LED versions supplied with LED circuit.IP66CLASS II qIK10
COLOUR:
Ø 102 mm CYLINDRICAL POLE TO BE BURIED with Ø 76 mm SPIGOTrecommended for MEGAFOCUSPOLE LED.Painted steel pole.Pole total height 7.50 m To be buried for 0.8 mProvided with inspection door and terminal board.
MEGAFOCUS POLE LED
The light distribution is in accordance with light pollution regulations.
LUMINOUS REGULATOR ACCESSORYMegafocus pole led can be supplied with a programmable luminous regulator
S.2818.24
![Page 51: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/51.jpg)
Ø 385
725
330
450
580
615
Ø 102
Øi 76
luxH = 6.65 m
1066 cd/klm
On request MEGAFOCUS POLE LED can be supplied as a TWIN HEAD version.
Photometric measured using NEUTRAL WHITE LED 4200K
With 36 accent leds in neutral white 4200K 50W 240V with street optic
Luminous flux wasted upward 0%
MEGAFOCUS POLE LED
The present catalogue can not be reproduced even partially. All rights reserved.Due to continual product development and improvement, any photographs, product descriptions, measurements, illustrations, drawings and specifications in
this catalogue may be approximations, and the company is not liable. We reserve the right to change specifications without prior notice. For updated data, see technical sheets and installing instructions available on our website. Products in this catalogue are PATENTED and/or REGISTERED.
MEGAFOCUS LEDS.3972N
![Page 52: outdoor lighting fittings - New products 2010-2011designed for grazing effects on façades and window frames. It can be connected to a maximum of 5 fittings in line, allowing for the](https://reader033.fdocuments.net/reader033/viewer/2022050511/5f9c42ccfe18d3439626caf5/html5/thumbnails/52.jpg)
CAT
NO
V2010EN
G