Optimized Production Technology (OPT) Prepared by Clint Ward Brigham Young University.

17
Optimized Production Technology (OPT) Prepared by Clint Ward Brigham Young University

Transcript of Optimized Production Technology (OPT) Prepared by Clint Ward Brigham Young University.

Page 1: Optimized Production Technology (OPT) Prepared by Clint Ward Brigham Young University.

Optimized Production Technology (OPT)

Prepared by

Clint Ward

Brigham Young University

Page 2: Optimized Production Technology (OPT) Prepared by Clint Ward Brigham Young University.

A Brief Overview

OPT Defined Importance Operational Measures

Goal of OPT Brainstorming Activity Nuts & Bolts

Real World Example Rules of OPT Exercise

Page 3: Optimized Production Technology (OPT) Prepared by Clint Ward Brigham Young University.

OPT Defined

• Optimized Production Technology is a planning & production system focused on throughput maximization by alleviating bottlenecks

(Precursor to Theory of Constraints)

Page 4: Optimized Production Technology (OPT) Prepared by Clint Ward Brigham Young University.

Why is OPT important?

“A chain is no stronger than its weakest link”

An organization can only speed up the length of the entire process if the bottleneck is alleviated

Page 5: Optimized Production Technology (OPT) Prepared by Clint Ward Brigham Young University.

OPT Operational Measures

• Throughput = “the rate at which the system generates money through sales”

• Inventory = “all the money that the system has invested in purchasing things which it intends to sell”

• Operational Expense = “all the money the system spends to turn inventory into throughput”

Page 6: Optimized Production Technology (OPT) Prepared by Clint Ward Brigham Young University.

The Goal of OPT

“Increase throughput while simultaneously reducing both inventory and operational expense”

Page 7: Optimized Production Technology (OPT) Prepared by Clint Ward Brigham Young University.

Brainstorming Exercise

• Pull out a piece of paper• Identify all of the area or processes on the

floor• Jot down bottlenecks

– Take 3-4 minutes; allow more time if needed to visit floor and find bottlenecks

Page 8: Optimized Production Technology (OPT) Prepared by Clint Ward Brigham Young University.

OPT Nuts & BoltsDependent Events: all processes count on the

completion of sequential operations

Statistical Fluctuations: process times fluctuate around an average

Due to these facts, a plant’s capacity must be unbalanced and bottlenecks are inevitable

Page 9: Optimized Production Technology (OPT) Prepared by Clint Ward Brigham Young University.

OPT Nuts & Bolts (cont.)

First,

Identify bottlenecks

Second,

Increase capacity of bottlenecks by minimizing machine idle time, avoid processing defective parts, avoid processing outside current demand

Third,

Shift work off of bottlenecks and give it to non-bottlenecks

Page 10: Optimized Production Technology (OPT) Prepared by Clint Ward Brigham Young University.

Obstacles

1. Knowing what to change

2. What to change to

3. How to institute the change

Page 11: Optimized Production Technology (OPT) Prepared by Clint Ward Brigham Young University.

Real World Example: Dow Corning Corporation

“Our plant’s on-time delivery was 50% and we were carrying over 100 days of inventory. We had six months to turn things around. Within my unit we identified the bottleneck and began to focus our resources there. By the time the six months were up, we had started to make significant changes using ‘The Goal’ as a reference. When I left the department cycle time had reduced 85%, operator headcounts reduced 35% through attrition, WIP were down 70%. On-time delivery was increased to 90%.” -The Goal by Eli Goldratt

Page 12: Optimized Production Technology (OPT) Prepared by Clint Ward Brigham Young University.

Ten Rules of OPT

1. Utilization and activation of a resource are not the same

2. The level of utilization of a non-bottleneck is determined not by its own potential but by some other constraint in the system

3. An hour lost at a bottleneck is an hour lost for the total system

Page 13: Optimized Production Technology (OPT) Prepared by Clint Ward Brigham Young University.

Ten Rules of OPT

4. An hour saved at a non-bottleneck is just a mirage

5. Bottlenecks govern both the throughput and inventory in the system

6. The transfer batch may not and often should not be equal to the process batch

7. The process batch should be variable, not fixed

Page 14: Optimized Production Technology (OPT) Prepared by Clint Ward Brigham Young University.

Ten Rules of OPT

8. Capacity and priority should be considered simultaneously, not sequentially

9. Balance flow, not capacity

10. The sum of local optima is not equal to the global optimum

Page 15: Optimized Production Technology (OPT) Prepared by Clint Ward Brigham Young University.

Break-out Exercise• Pull out your brainstorm lists of bottlenecks• Gather in groups of 3-4• Round-robin through everyone’s lists

(3 min)• Everyone pick 1 bottleneck (should have

duplicates) and jot down ways to increase capacity

• Discuss effects of the changes

Page 16: Optimized Production Technology (OPT) Prepared by Clint Ward Brigham Young University.

Summary

• Any process can be improved!• Focus on the bottlenecks!• Identify ways to increase bottleneck

capacity!• Never forget the goal: “Increase throughput

while simultaneously reducing both inventory and operational expense”

Page 17: Optimized Production Technology (OPT) Prepared by Clint Ward Brigham Young University.

Readings List• Ellram, L., Fawcett, S., Ogden, J. (2007), Supply Chain Management,

Pearson Education, Inc., Upper Saddle River, New Jersey. • Goldratt, E., Cox, J. (2004), The Goal, North River Press,

Great Barrington, MA. • http://blog.jackvinson.com/archives/2010/12/20/the_rules_of_opt_-

_precursor_to_theory_of_constraints.html• http://bulatov.org.ua/teaching_courses/logistics_files/Logistics

%20Lec2%20OPT.pdf• http://en.wikipedia.org/wiki/Eliyahu_M._Goldratt• http://www.angelfire.com/ca2/jlui/thegoal.html• http://www.blackwellreference.com/subscriber/uid=1129/tocnode?

id=g9780631233176_chunk_g978140511096919_ss7-1• http://www.tangram.co.uk/TI-Glazing-Manstrat_04.html