Optical Fiber Cables Splicers.
Transcript of Optical Fiber Cables Splicers.
Rotating Globe Flash
View in Slide Show mode (F5) to see
Flash animation
04/10/2023 2
Put your title here
•Add your text here
Fiber
Splicing.
04/10/2023 4
1- Introduction. 2-Inserting Power Supply Unit.3- Change Operating Direction.
4- Key Component.5- Splicing Operation.
6- Splicing Procedures.7- Splicing with Fiber Holders.
8- Splicer Cleaning.9- Replace Electrodes 1.
10- Replace Electrodes 2.
1- Introduction.
2-Inserting Power Supply
Unit.
3- Change Operating Direction.
4- Key Component.
5- Splicing Operation.
6- Splicing Procedures.
7- Splicing with Fiber Holders.
8- Splicer Cleaning.
9- Replace Electrodes 1.
10- Replace Electrodes 2.
OPTICAL
FIBER
CABLES
SPLICERS
04/10/2023 16
FUJIKORA SPLICERS
04/10/2023 1704/10/2023 1704/10/2023 17
FSM60S
04/10/2023 1804/10/2023 1804/10/2023 18
Features:● Rugged construction providing shock, dust and moisture resistance● Dual monitor position with automatic image orientation● Automatic arc calibration and fiber identification● User-selectable fiber clamping method - sheath clamp or fiber holders● Auto-start tube heater feature● Color LCD display with anti-reflective coating for excellent visibility in bright sunlight● Simultaneous battery charge and splicer operation Fonsun Technology● Long life battery (up to 160 splice/heat cycles per charge)● Detachable work table incorporated into the transit case● Data and video download software included; software upgrade available via the internet● Green friendly-RoHS & WEEE compliant
FSM60S
04/10/2023 19
FSM50S
04/10/2023 2004/10/2023 2004/10/2023 20
The FSM-50S Fusion Splicer sets the standard for core alignment fusion splicers. The FSM-50S is the fastest field splicer available, and completes a splice and tube heat in a total of 44 seconds. Special features include its small size and weight - the smallest in the industry - and the legendary ruggedness Fujikura is known for. The FSM-50S also includes user-friendly features such as calibration-free arc adjustments, automatic fiber type identification and reduced operational steps. The FSM-50S also offers increased flexibility for various splicing tasks with user-selectable front and back monitor positioning.
Features:• Automatic core to core, low-loss splicing regardless of fiber quality or age• 9-second splicing time• 35-second heat time (60mm sleeve)• Dual, user selectable monitor position• Excellent visibility in bright sunlight with 5.6” TFT Color LCD display• Automatic arc calibration• Long life battery (up to 160 splice/shrink cycles per charge)
FSM50S
04/10/2023 21
FSM40S
04/10/2023 2204/10/2023 2204/10/2023 22
Fujikura offers FSM-40S & FSM-40S-B to provide ideal solutions for all the splicing applications in Telecom and DWDM industry.Both splicers are equipped with a lot of new functions such as, NZDSF (ITU-T G.655) splicing capability, dissimilar fiber splicing capability, accurate splice loss estimate function and the quickest splicing performance in the most compact and lightest body in the industry. The two types have many components in common but locations of monitor, Tube-heater, wind protector opening direction and panel keyboard are different. Now you can choose one depending on your splicing applications and preference.
Features:● Core-to-core fiber alignment system● Quick "15sec" splicing and Full automatic operation● NZDSF (ITU-T G.655) splicing capability● Dissimilar fiber splicing capability● Compact and light-weight and various power supply options● 2 CCD camera, No up-down mirror● High resolution 5 inch color LCD monitor● Automatic Arc Calibration function for stable arc discharge● Automatic fiber type identifier and self diagnostic test function● PC Communication function with RS232C (Splice results, splicing parameters, etc.)●Two different types to choose from Front monitor or top monitor
FSM40S
04/10/2023 2304/10/2023 2304/10/2023 23
FSM60R
04/10/2023 2404/10/2023 2404/10/2023 24
Features:● Rugged construction providing shock, dust and moisture resistance● Dual monitor position with automatic image orientation● Automatic arc calibration and ribbon fiber identification● Auto-start tube heater, Fonsun Technology● Color LCD display with anti-reflective coating for excellent visibility in bright sunlight● Simultaneous battery charge and splicer operation● Long life battery (up to 90 splice/heat cycles per charge)● Detachable work table incorporated into the transit case● Data and video download software included; software upgrade available via the internet● Green friendly-RoHS & WEEE compliant
FSM60R
04/10/2023 25
FSM50R
04/10/2023 26
The FSM-50R12 offers numerous improvements to increase productivity and provide additional flexibility. A new “auto load” feature provides for fast and easy placement of the fiber holders into the splicer. The FSM-50R12 also benefits from a greatly improved tube heater which shrinks a 12 fiber splice protection sleeve in approximately 45 seconds.Other enhancements include larger capacity batteries, dual direction monitor, and real time arc calibration. The FSM-50R12 quickly attaches to our newly redesigned ASW-02 workstation, making field portability a breeze.
Feature:• 45 second tube heater• Dual direction monitor position• Long life batteries (up to 140 splices/shrinks per charge)• Automatic arc calibration
FSM50R
04/10/2023 27
FSM45PM
04/10/2023 28
The FSM-45PM is designed for splicing of polarization maintaining fibers.The FSM-45PM has PAS (Profile Alignment System) technology for core-to-core fiber alignment, and theta alignment system for polarization maintaining fiber by rotating the fiber with theta motors. In addition, some unique functions are available, which enable splicing of various fibers such as dissimilar fiber, large diameter fiber, attenuation splicing and short cleaved length splicing. The fiber holder system, which is exclusively designed for FSM-45PM, provides easy handling of fiber during a series of splicing processes.
Features:1. Core-to-core fiber alignment system with PAS technology.2. Automatic theta alignment for polarization maintaining fibers.3. Universal Fiber Clamp for the fiber with the diameter of 80mm to 400mm4. V- groove Driving System for various kinds of splicing work.5. Short cleaved length splicing capability.6. Splice loss estimation function.7. Cross talk estimation function for polarization maintaining fiber splicing.8. Sweep arc function for various kinds of dissimilar fiber splicing.9. Power monitor feedback alignment capability with GP-IB interface.10. USB terminal and serial port for PC communication
FSM45PM
04/10/2023 29
SUMITOMO SPLICERS
04/10/2023 30
Type- 39 FastCat™
04/10/2023 31
Sumitomo's Type- 39 FastCat™ Core Alignment Fusion splicer is the industry's first splicer to feature a Dual-Automatic Heater System featuring Auto Start Heater and Auto Start Splicefunctions — making the FastCat the fastest splicer available today.- The Type-39 FastCat's advanced electronic design, which accommodates the built-in dualheating system and simultaneous operation, reduces the bottle neck of “heater wait time”by 88%. With an individual heater cycle time of only 30 seconds (60mm Fiber ProtectionSleeves) and a splice cycle of only 9 seconds, the FastCat improves splicing efficiency by 70%.The FastCat is a fully automatic, highly portable, self-contained instrument for creating quick and effortless low-loss optical fiber splices in any environment with a typical spliceloss of only .02(dB) for identical single-mode fiber. It is designed to work with virtuallyall fiber types including single-mode, multimode, dispersion shifted and other specialty fibers.The splicer utilizes precision High-resolution Direct Core Monitoring (HDCM) technologyto form repeatable low-loss splice results. HDCM and Dual Heater technologies, combinedwith Sumitomo Electric's track record for reliability and customer support, make the FastCatthe industry's new standard for fusion splicers.
04/10/2023 32
Features:● RoHS Compliant● Dual Independent Splice Protection Heaters● 5.6” Switchable Color Monitor for Front to Back or Back to Front Operation● Automatic Splice Start● Automatic Heater Start● Automatic Fiber Profiling Detection● Complete Splice in Less than 40 Seconds● Built-In LED for V-Groove Illumination ● User-Friendly Menu Selection System● 24-Hour Technical Support via 888-SPLICER
04/10/2023 33
FITEL SPLICERS
04/10/2023 34
S122A
04/10/2023 35
KEY FEATURES:● Superb Mobility and WorkabilitySuper low profile design, with only 1.85” height at the keypad, the S122 provides a stable working environment both on the work bench and palmtop. Attaching the S122 to the Work Table (optional) enables hands-free operation, as well as easy access to various work fields by folding the splicer upward.● Rugged BodyThe top body and windshield are made of magnesium die-cast. The bottom body is protected with rubber corner pads. With its simple and flat shape, the S122 can survive during harsh conditions.● New GUI & LCD ScreenFeaturing a new GUI (graphical user interface) and transreflective LCD screen technology, the S122 operation is a snap! Function keys are simple and information displays are crisp and clear even in direct sunlight.● Multi-Window Fiber DisplayThe LCD display shows the splicing process with simultaneous X and Y camera views, as well as status icons monitoring the machine conditions.● Fast and AccurateThe fast 14-second splice time and 37-second heat time creates a highly efficient work environment. The S122 observes the fiber from 2 directions just as all high-end splicers, promising high quality splice from trunk to FTTX.● Enhanced Ease of UseMemory for fiber image, counters for cleaver and stripper blade replacement and visual maintenance instructions are provided for your ease of use.
04/10/2023 36
ERICSON SPLICERS
04/10/2023 37
FUS
995PM
04/10/2023 38
Ericsson FSU-995 PM Fusion Splicer Polarization Maintaining.
The demands for more specialized and sophisticated splicing equipment for use in industrial applications has increased rapidly. To match this, Ericsson releases a new series of fusion splicers for industrial use.The FSU 995 series has all the unique features needed to satisfy demanding requirements of specialized fiber splicing, such as PM splicing, Erbium splicing, and thin core splicing.The FSU 995 series consists of two different splicers, each with its own unique features. The FSU 995 FA for standard factory applications including high strength splicing, and the FSU PM for splicing Polarization Maintaining fibers.
04/10/2023 39
NormalSPLICERS
SPECIFICATIONS
04/10/2023 40
Characteristics : 2.8kg weight, light and handy, user friendly, easy to operateSplicing Method : Core Alignment (PAS)Applicable Fibers : SM (ITU-TG.652), MM (ITU-TG.651), DS (ITU-TG. 653), NZDS (ITU-TG. 655)Average Loss : SM(0.02dB), MM(0.01dB),DS(0.04dB), NZDS(0.04dB), G.657(0.02dB)Return loss : >>60dBSplice time : 9SCleaved length : 8-16mm(fiber diameter <0.25mm);>16mm (fiber diameter >0.25mm)Operating Environment altitude : 0-5000M;humidity:95%;working temperature:-10 to 50 C;Data saving temperature : -40 to 80 CMagnification : 300XMonitor : 5.6 inch TFT LCD
04/10/2023 41
Splice Programs custom : 40; default 10Coating Diameter : 100-1000 umCladding Diameter : 80-150umSplice Memory : 2000 itemsFiber Display : X/Y or XYPull test : 2NHeating Programs preset : 10Heating Time : 35sProtection Sleeve : 60mm, 40mmBattery : 10.8AhPower Supply : AC 100-240V; DC 12-15VData Output : COM portSoftware Update : USB portSize : 150x150x170mm(LxWxH)Weight : 2.2KG (Include battery 2.9KG)
04/10/2023 42
ProfessionalSPLICERS
SPECIFICATIONS
04/10/2023 43
Applicability Features.
04/10/2023 44
Corning Fujikura Sumitomo Manufacturer
Version CDS FSM-50S T-39 Model
Core to core Core to core, ECF & Diameter
Core to core, AIAS & Diameter
Fiber alignment
Yes, but ECF mode must be manually activated and a special program
created
Yes, AIAS mode, automatically activated
Compensation for surface tension effect on fibers with high core to cladding concentricity error
0.1dB to 10dB 0.1dB to 15dB 0.1dB to 15dB programmable in 0.1dB
steps
Attenuation splicing
SMF, DSF, NZDSF, MMF,
EDF
SMF, DSF, NZDSF, MMF and others
SMF, DSF, NZDSF, MMF, CSF, PSCF, EPSCF and
others
Applicable fiber
04/10/2023 45
Yes Yes Cladding clamps built into wind hood
No Yes Cladding clamps can work separately from wind hood
250 to 900um 100um to 1mm 250 to 1000um Coating diameter
8 to 16mm 8 to 16mm Cleave length: 250um coating
16 mm on 900um as standard.
Option for 8 to 16mm on 900um
16mm with non-250um Cleave length: secondary tight buffer
Not applicable as no loose tube clamp
option
Loose tube clamp option planned but not yet
available
Cleave length: secondary loose buffer
04/10/2023 46
No No Fiber holder fiber handling system
Yes Yes Yes Coating clamp fiber handling
No Planned by SEI but no release date given
Loose buffer clamp
04/10/2023 47
Hardware Features.
04/10/2023 48
2 axis, X & Y 2 axis, X & Y 2 axis, X & Y Fiber observation
x180 x295 or x147 x320 and lower Magnification of image on screen
5.5 inch LCD 5.6 inch LCD 5.6 inch LCD Display
Yes, ~180° with display inversion
Yes, ~180° with display inversion
Tilt able display
Yes Yes Invert display for "backwards" operation
Yes, white LEDs Yes, white LEDs Yes, white LEDs V-groove illumination
RS-232 USB1.1 USB Computer interface
04/10/2023 49
Software features.
04/10/2023 50
Unknown Unknown Command language for remote control by
PC
Text menu and cursor Text menu and cursor User interface
Symbolic labels Symbolic labels Keypad
Yes Yes Self test mode
Yes Yes PC program for data download
Yes Yes Yes Calendar
04/10/2023 51
Physical features.
04/10/2023 52
7kg without battery, 8.5kg
including two 2.3Ah
batteries
2.8kg with AC adaptor 2.8kg with AC adaptor Weight
240W x 265Dx 156H
(mm)
150W x 150D x 150H (mm) 150W x 150D x 150H (mm) Size
9.9lt 3.4lt 3.4lt Volume
04/10/2023 53
Environmental & power supplies features.
04/10/2023 54
-'5 to +45°C 93% relative humidity non-condensing
-'10 to +50°C 95% relative humidity non-
condensing
-'10 to +50°C 95% relative humidity non-condensing
Operating environment
-'20 to +70°C -'40 to +80°C -'40 to +70°C Storage environment
90 to 260V 50/60Hz
100 to 240V 50/60Hz 100 to 240V 50/60Hz
AC power supply
12 to 14.5V 10 to 15V 10 to 15V DC power supply
Up to 4000m Up to 5000m Up to 5000m Operating altitude
15m/s 15m/s Wind protection
70~80W maximum Approx 40W maximum
Power consumption
04/10/2023 55
2 slots for 2.3 Ah each batteries
BTR-06S 4.5Ah NiMH or BTR-06L
9Ah NiMH
BU-66S 4.5Ah NiMH or BU-66L 9
Ah NiM
Internal battery
Unknown BU-66S 250 splice cycles, BU-
66L 500 splice cycle
Splice cycles on internal battery
BTR-06S 60~80, BTR-06L ~160, temperature not
specified, and uses 20s display auto-switch off to save
power
BU-66S 100~125+, BU-
66L 200~250+
Splice & oven cycles on internal battery
04/10/2023 56
Splicing features.
04/10/2023 57
Yes, threshold programmable from 0
to 10° or OFF
Yes, threshold programmable from
0 to 20°
Pre-splice cleave angle check
Yes Yes Pre-splice dust check
Yes Yes Pre-splice crack check
Yes Yes Yes Automatic splice program selection
Yes Yes Splice mismatched fibers with auto-program
Yes Yes, from splicer keypad Yes Manual splicing mode
04/10/2023 58
15s (fast) and 20s (precise) claimed.
9s claimed. Actual depends if auto fibre detection, auto start, auto arc optimization selected and on fiber type. Varies between
11s and >20s
9s SMFxSMF in Quick mode. Actual depends if auto start & auto fiber detect selected and on
choice of Quick/Normal mode .
Splice time: start to loss estimate
Splice time: gap set to loss estimate
50 ,13 fixed
programs supplied
40 ,10 distinct programs supplied
48 ,8 distinct programs supplied
Number of splice programs
Yes, must be activated in Admin Mode
Programmable variation in arc power during splicing
04/10/2023 59
Yes. Yes Yes, must be activated in Admin
Mode .
Programmable fiber pulling during splicing
Yes, but adds 3~4s to the splice time for every splice and
reported to work poorly
No Automatic arc power optimization before each splice
Yes, using P, H and T sensors?
Yes, using Arc Test Arc environment compensation
Yes, using Arc Calibration. Takes 30~60s
Yes, using Arc Test. Takes ~12s
Automatic compensation for build up of glass debris on electrodes
04/10/2023 60
No, manual control only of "Gapset
Position"
Yes, by Arc Test . Automatic compensation for mismatched melting points
Yes, by Arc Calibration Yes, by Arc Test Automatic compensation for shift of arc centre from electrode centre
Yes Yes Pressure sensor
Yes Yes Temperature sensor
Unknown, but probably No Humidity sensor
04/10/2023 61
After Splicing features.
04/10/2023 62
0.02dB SMF, 0.01dB MMF, 0.05dB DSF,
0.04dB NZDSF
0.02dB SMF ,0.01dB MMF ,0.04dB DSF"
0.02dB SMF ,0.01dB MMF ,0.04dB DSF
Splice loss, break & remake identical fiber
MFD mismatch, core offset, tilt, microbending
MFD mismatch, offset, core offset, core deform
Loss estimate criteria
±0.05dB ±0.05dB Loss estimate accuracy
Better than -60dB Better than -80dB Splice return loss
200gf 200gf Proof test
10000 2000 10000 Store splice results
No No View pre-splice images on splice completion
Yes Yes Re-arc of completed splice
04/10/2023 63
Splice protectionfeatures.
04/10/2023 64
Optional, single oven
Built-in, single oven, optional second oven can be added at
extra cost
Built-in, dual independent ovens
Heat shrink oven
Up to 60mm Up to 60mm Applicable splice protector length
10 Number of oven programs
Yes Yes Programs for Japanese style "open" sleeves
No Yes Programs for European style semi-pre-shrunk sleeves
35s claimed. 38s actual on SEEL SPS
~28s on SPS sleeve Heat time: 40mm sleeve
50s actual on SEEL SPS sleeve ~30s on SPS sleeve Heat time: 60mm sleeve
No No 50g preload oven clamps to keep fiber straight
Yes Yes, from Fujikura's German distributor
Yes, from our German distributor, Tele Sudost
Netze GmbH
Adaptor for Corning or Marconi crimping tool
مهندسشكرى
الجبالى