Online Extra shop-made Tool Holders - WoodsmithTool Holders The drawings on these pages provide you...
Transcript of Online Extra shop-made Tool Holders - WoodsmithTool Holders The drawings on these pages provide you...
Online Extra
Woodsmith No. 187 Online Extras Page 1 of 1 ©2010 August Home Publishing. All rights reserved.
shop-made
ToolHolders
The drawings on these pages provide you with the information needed to build tool holders for the tam-bour tool cabinet featured in Woodsmith 187. Keep in mind that it may be necessary to customize the dimensions and arrangement of the individual hold-ers to the tools you wish to accommodate. W
FRONT VIEW
SIDE VIEW
#/4" radius
!/2
3#/8
1
9
14!/4
2
6!/4
!/4"-dia. rare-earth magnet
7
4!/4
2
!/4
!/4
2!/2
3!/4
3#/8
!/4"-dia. rare-earth magnet
12
1!/2
1
1!/4
!/16
!/2
!/16 !/4
#/16#/8
#/8
#/8
#/4
!/8
!/16
1
&/8
#/8
!/2
!/8
!/8
NOTE: All covesare #/16"radius
#/8
PANEL FOR LAYOUT TOOLS
NOTE: Ease all edges with sandpaper
NOTE: Holders are made from
hardwood. Panel is !/4" plywood
NOTE: Glue tool holders to panel
Drill andcountersink for
#6 x #/4"Fh woodscrews
Online Extra
Woodsmith No. 187 Online Extras Page 2 of 2 ©2010 August Home Publishing. All rights reserved.
1!/4
26!/2
5!/2
2
&/8
!/2
3
#/4
2!/2
TOP VIEW
1!/4" radius
!/4" radius
2 2 2
9!/4 2 2 2 2
1!/4
#/8" radius
!/4" radius
#/8" radius#/8
!/2
FRONT VIEW
1!/8
!/8
END VIEW
!/2
&/16!/2
TOOL RACK
COPING SAW HOLDER
5
FRONT VIEWSPOKESHAVE HOLDER
ENDSECTIONVIEW
1
1!/ 2
2!/22!/2
FRONT VIEWHAMMER HOLDER
1!/ 2
1
#/4
!/4
!/4"-dia.dowel
!/4
Hammersupportblock
Hammersupportblocks
!/2"-dia. rare-earth magnet
NOTE: Tool rack is made from #/4"-thickhardwood
NOTE: Tool rack is attached with #8 x 1!/2" Fh woodscrews through false back
NOTE: Drill and countersink for #6 x 1!/2"Fh woodscrews
NOTE: Shape support blocks to fit hammer
NOTE: Drill and countersink for #6 x #/4"Fh woodscrews
Online Extra
Woodsmith No. 187 Online Extras Page 3 of 3 ©2009 August Home Publishing. All rights reserved.