NORAMENT RUBBER TILES_. INTRODUCTION_ BENEFITS_ RANGES_ SUGGESTED SPECIFICATION_ INSTALLATION...

NORAMENTRUBBER TILES_

INTRODUCTION_

BENEFITS_

RANGES_

SUGGESTED SPECIFICATION_

INSTALLATION INSTRUCTIONS_

MAINTENANCE PROCEDURES_

TECHNICAL PROPERTIES_

Norament Rubber TilesErgonomic, sound absorbent, stain and slip resistant, our and norament® rubberflooring product collections offer you a broad variety of design options and speciality flooring applications to meet your flooring needs.

INTRODUCTION_ FloorworX partners with nora® to bring South Africa sustainable

commercial rubber flooring solutions

Ergonomic, sound absorbent, stain and slip resistant, our norament® and noraplan® rubber flooring product collections offer you a broad variety of design options and speciality flooring applications to meet your flooring needs

A comprehensive accessory collection, developed to complement nora® floor coverings, complete our range of products

The noraplan® sheeting collection offers unlimited design options thanks to the varied patterns with smooth surface and harmonised colour range


BENEFITS_ High footfall sound absorption

Superior Life Cycle Assessment (LCA) Exceptionally wear resistant

Outstanding fire-resistant properties

Largely oil and grease resistant

Can be used on raised-access floors

nora® rubber floor coverings do not contain any PVC, plasticizers (phthalates) or halogens (e.g. chlorine)

Low maintenance

Rubber flooring for heavy traffic areas

Resistant to cigarette burns


RANGES_ Norament 825

Norament 926 (incl. stairtread)

Norament 926 Grano (incl. stairtread)


SUGGESTED SPECIFICATION_TILES

Supply and fix 3.2mm/4.0mm thick x 501mm x 501mm OR 1005mm x 1005mm norament® 825/926/926 grano rubber floor tiles with round pastilles, manufactured in accordance with EN 14041 and laid in FloorworX No. 55 two-part polyurethane adhesive which has been spread using a trowel fitted with an A2 notched blade at a rate of approximately 12m2 per 6kg pack on a previously prepared Class 1 sub-floor in accordance with SANS 10070, using FloorworX Self Leveller when required, including all cutting and waste

The flooring must be rolled in both directions with an articulated 68kg three-sectional roller immediately after it has been laid into the adhesive.


WARRANTY_

FloorworX offers a 5 year limited warranty, subject to our terms and conditions, against defective material provided that it is installed and maintained in accordance with our recommendations


INSTALLATION INSTRUCTIONS_

Norament should be installed in accordance with manufacturer’s recommendations

Training Centre is available for installation training to installers

SUB-FLOOR_ Sub-floors must be smooth, hard, clean, and dry before laying

commences

The final appearance and durability of any resilient flooring installation depends largely on the condition of the surface upon which it is laid

A good sub-floor is vital in achieving a satisfactory adhesive bond and long-term durability

Uneven, solid or suspended timber floors may need preparation to meet the required standard


SUB-FLOOR_ All sub-floors must be tested for moisture content prior to installation

To prevent problems associated with rising damp - it is essential that a damp-proof membrane be incorporated beneath the sub-floor

The South African Standard Building Regulations require that all sub-floors in contact with the ground are so constructed as to be damp-proof

Water is an integral part of the construction of a sub-floor - the amount of water used depends on the type of sub-floor, the required structural strength and the extent of curing

It is impossible to state a time period after which a sub-floor may be considered dry enough upon which to lay flooring - factors such as ambient temperature, relative humidity, thickness of the slab, type of finish required and methods used to cure the concrete, will affect this period

There are various methods of testing the moisture content within the sub-floor, which includes the use of a Hygrometer – the most practical and accurate instrument


CLIMATIZATION_

Norament must be allowed to relax for 24 hours in a uniform room temperature between 18°C and 27°C prior to installation

ADHESIVE_ The recommended adhesive for Norament is FloorworX No. 55 two-part

polyurethane adhesive

Adhesive to be spread using a trowel fitted with an A2 notched blade at a rate of approximately 12m2 per 6kg pack

POST INSTALLATION_ It is essential that during the course of installation the material be

rolled in both directions with an articulated 68kg three section metal floor roller


MAINTENANCE_PREVENTIVE CARE Approximately 80% of the dirt and soiling that has to be cleaned off a

floor has been trafficked in from outside the building. More than 90% of that soiling can be avoided by the use of an effective entrance matting system

When less dirt is trafficked through the entrance there will be a reduction in maintenance requirements.

Regular cleaning is more cost-effective and hygienic than occasional heavy duty cleaning

Wipe up any grease and oil spills immediately and treat stains as soon as they are observed

Black rubber wheels and rubber furniture feet can discolour the floorcovering - hard plastic is preferred

Always follow the manufacturer’s dosage instructions regarding the use of cleaning chemicals


MAINTENANCE_POST INSTALLATION SITE CLEAN Floor maintenance begins immediately after the completion of

installation

The initial step is to remove any loose dirt or debris using a dry mop, broom or vacuum

Sand, construction debris and sharp-edged objects may result in irreparable damage being inflicted to the new floor.

Remove any visible adhesive residue using a damp cloth, once the adhesive has cured it will be difficult to remove

If other trades are working in the building after the installation of the flooring, the floor must be protected from subsequent damage by the use of thick paper, cardboard or hard board.

No wet maintenance must take place until 72 hours (3 days) have elapsed from the time of installation - this is to ensure that the adhesive has sufficient time to cure properly and develop full bond strength


MAINTENANCE_INITIAL CLEAN Dust mop or vacuum the floor to remove loose soil and dust

Scrub the floor using a solution of FloorworX Maintain diluted 1:10 with clean water, with a rotary machine fitted with a red pad for Noraplan sheeting

Remove the residue immediately after scrubbing using a wet/dry vacuum

Rinse with clean water using a flat mop and allow the floor to dry


MAINTENANCE_REGULAR CLEANING Dust mop with a flat mop or vacuum on a daily basis to remove dust

and loose dirt

Damp mop with a flat mop or auto-scrub the floor with a red cleaning pad

Dry buff the floor using a rotary machine fitted with a white pad


MAINTENANCE_OCCASIONAL MAINTENANCE Apply a solution of FloorworX Maintain diluted 1:10 with clean water to

the floor using a wet mop and allow to soak for 10 minutes

Scrub the floor with a rotary machine fitted with a red pad

Remove the residue immediately after scrubbing using a wet/dry vacuum

Rinse with clean water using a mop and allow the floor to dry


TECHNICAL PROPERTIES_


Please feel free to visit our newly revamped website at www.floorworx.co.za

Read our Blog on our website at http://www.floorworx.co.za/category/blog/

Subscribe to our Newsletter by mailing your request to [email protected]

Follow us on Facebook, Twitter, YouTube & Pinterest

END OF PRESENTATION_

http://www.floorworx.co.za/

http://www.floorworx.co.za/category/blog/

http://www.floorworx.co.za/category/blog/

mailto:[email protected]

NORAMENT RUBBER TILES_. INTRODUCTION_ BENEFITS_ RANGES_ SUGGESTED SPECIFICATION_ INSTALLATION...

Documents

Transcript of NORAMENT RUBBER TILES_. INTRODUCTION_ BENEFITS_ RANGES_ SUGGESTED SPECIFICATION_ INSTALLATION...