Noise Wall - ausrollform.com.au Wall Brochure.pdf · Corten, Stainless Steel and Aluminium, to suit...
2
Australian Rollforming’s deep rib steel noise wall systems are widely used alongside motorways and other major road and rail systems to provide a unique sound deadening barrier that are also aesthetically appealing by blending in and complementing the surrounding landscape. Where a highly aesthetically appealing appearance is required for both sides of the noise wall and/or where an even higher level of sound attenuation is required, double sided sections can be provided. Other thicknesses and profiles are also available in a variety of materials, including Colorbond, Corten, Stainless Steel and Aluminium, to suit specific project and design requirements. Noise Wall Australian Rollforming Noise Walls are designed to withstand considerable windloads and they provide a number of advantages over other materials and systems: » Superior sound attenuation qualities » Aesthetically appealing » Flexibility with design » Ease and speed of installation » Low maintenance » Long life span » Cost effectiveness The noise wall panels are typically rollformed into a 60mm or 90mm deep trapezoidal profile from pre-galvanised or Corten steel in 1.6mm, 2.5mm and 3.0mm steel thicknesses.
Transcript of Noise Wall - ausrollform.com.au Wall Brochure.pdf · Corten, Stainless Steel and Aluminium, to suit...
Australian Rollforming’s deep rib steel noise wall systems are widely used alongside motorways and other major road and rail systems to provide a unique sound deadening barrier that are also aesthetically appealing by blending in and complementing the surrounding landscape.
Where a highly aesthetically appealing appearance is required for both sides of the noise wall and/or where an even higher level of sound attenuation is required, double sided sections can be provided.
Other thicknesses and profiles are also available in a variety of materials, including Colorbond, Corten, Stainless Steel and Aluminium, to suit specific project and design requirements.
Noise Wall
Australian Rollforming Noise Walls are designed to withstand considerable windloads and they provide a number of advantages over other materials and systems:
» Superior sound attenuation qualities
» Aesthetically appealing
» Flexibility with design
» Ease and speed of installation
» Low maintenance
» Long life span
» Cost effectiveness
The noise wall panels are typically rollformed into a 60mm or 90mm deep trapezoidal profile from pre-galvanised or Corten steel in 1.6mm, 2.5mm and 3.0mm steel thicknesses.
Australian Rollforming is a custom metal rollforming specialist, with the capability to rollform an almost infinite number of profiles in a wide range of metals.
Contact us to discuss your requirements.
Australian Rollforming Manufacturers Pty Ltd 17 - 23 Gaine Rd, DANDENONG SOUTH VIC 3175 AUSTRALIA
Phone 61 3 8769 7444 Email [email protected] Fax 61 3 8768 7496 Website www.ausrollform.com.au AUSTRALIAN STEEL INSTITUTE
Member of
© Copyright in this material vests in Australian Rollforming Manufacturers Pty Ltd and may not be reproduced, adapted, published or communicated to the public without the express written permission of the copyright owner.
Innovation Quality Reliability
Depending on the design of the wall, the panels can be laid horizontally, vertically or at any other angle to achieve the desired architectural appearance, and each panel is mitre cut and pre-punched to very tight tolerances to match the structural members of the wall.
Australian Rollforming’s Noise Wall systems are available either as a complete package which includes the panels and the supporting structural members, or the panels can be supplied separately.
The Company was awarded the 2010 prestigious Manufacturers’ Monthly Endeavour Award for Australian Steel Innovation for the Noise Walls that were supplied to the Deer Park Bypass project in Victoria.
