New Standard! Metal Mini-Photoeye
Transcript of New Standard! Metal Mini-Photoeye
LR-Z SER
IES
PR-M
/F SERIE
S
01 02
PR-M/FSERIES
NEW
New Standard for Photoelectric Sensors
Self-contained MiniaturePhotoelectric Sensor
New Standard!Metal Mini-Photoeye
2
SERIESPR-M/F
Self-contained Miniature Photoelectric Sensor
NEW
Optimizing miniature photoelectric sensorsConventional miniature photoelectric sensors typically do not provide long term reliability due to weak structural design and unstable operation. In order to solve these issues, operation stability features including background suppression and automatic cross talk prevention have been combined with a heavy duty metal housing to create a better miniature photoelectric sensor.
Background suppression and Automatic cross talk prevention
Resin filled, Stainless steel body (SUS316L)
Simple installation and No sensitivity adjustment required
EASE OF USE
DURABLE & LONG LIFE
STABLE OPERATION
4
5XResin filled, Stainless steel body (SUS316L)
More resistant toimpact than conventional models
DURABLE & LONG LIFE
5
Resin filling
Conventional m
odel
Cross-sectional view
SUS316L
81%reduction
20mm 0.79''
4.5mm0.18''
The “hybrid structure”, featuring a resin filled, SUS316L stainless steel body, was designed to achieve approximately five times greater shock resistance*. The heavy duty body of the PR-M/F is also highly resistant to oils, acids, and alkaline detergents and can be used in harsh environments due to its NEMA and IP rated enclosure. These features, combined with an 81 percent reduction in size*, result in the smallest, most durable miniature photoelectric sensor in its class. * Comparison with conventional models.
Smallest stainless steel photoelectric sensor in its class
<Hybrid structure > Stainless steel (SUS316L) + Resin filled body
5XShock
resistance
Compared to conventional
models
greater
The smallest metal photoeye in its class
IP67/69K,NEMA 4X,6P,13 Cable protection
100K1KDC 150K 200K 250K
LED lighting
LightFrequency
(Hz)Incandescent/fluorescent lighting
Sunlight
300K 350K
Normal operation range for common photoelectric sensorsApprox. 150 kHz
Normal operation range for the PR-M/F SeriesApprox. 300 kHz
6
Background suppression and Automatic cross talk prevention
30 mm1.18''/15 mm0.59''
STABLE OPERATIONThe PR-M/F Series improves detection stability, compared to conventional miniature photoelectric sensors, while maintaining ease of use. This sensor operates on a much higher light emitting frequency than most light sources, which greatly increases its immunity to ambient light. Combined with its built-in cross talk prevention algorithm, the PR-M/F Series eliminates the need to install additional shielding from other light sources. To further improve stability, an automatic power control function has been included to increase/reduce the light intensity of the sensor. Paired with its higher operating frequency and cross talk avoidance functions, this first in industry feature greatly reduces the effect of the target's color or angle to create the most reliable detection ability in its class.
Light frequency comparison Automatic power control function
On a dark workpiece[Increased light emission]
On a bright workpiece [Reduced light emission]
1.2 m 3.94'Thrubeam typeMaximum Detecting Distance
Background suppression typeMaximum detecting distance
7
Simple installation and No sensitivity adjustment required
EASE OF USEThe PR-M/F was created with ease of use in mind from installation to operation. No special hardware is required as standard M3 screws are used for mounting. All models* feature both Light-on and Dark-on outputs, eliminating the need to maintain multiple part numbers. Once integrated, no sensitivity adjustment is required. Operation is instantly possible and easily monitored with the sensors highly visible indicators. *Excludes M8 3pin connector type
Highly visible indicators M8 connector types available Install with standard M3 screws. No special hardware required.
Highly visibleindicators
M3 screw installation
8
The compact body enables easy installation even in a very narrow space.
No sensitivity adjustment is required, which allows for quick and simple installation while maintaining completely reliable detection.
The profile of the sensor is greatly reduced, decreasing the potential for interference with the loading process while the stainless steel body resists damage when impact does occur.
Presence/absence of handfed parts was detected with conventional photoelectric sensors, which interfered with the loading process and resulted in damage.
Versatile for use in a wide variety of applications and industries
Bowl feeders Electronics
Presence/absence confirmation of connectors during parts feeding
Detecting improper seating of IC chips
Presence/absence detection of handfed parts
AfterBefore
Improvement application
9
The sensitivity is automatically adjusted according to the light intensity received by the sensor, which reduces the effects of the angle and color of the target, and results in stable operation.
The background suppression function reduces the effects of ambient light, which results in stable detection in all conditions.
Reduced by 81% in size*, the PR-M/F can be installed in extremely narrow spaces. *Compared to conventional models
The equipped background suppression function provides stable detection of components only in the specified operating range, eliminating false detection.
Electronics
Arrival confirmation of electronic PCBs
Solar
Presence/absence confirmation of solar substrates
Packaging
Passing bottle confirmation on side by side conveyors
Automotive
Presence/absence confirmation on instrument panels
10
❚ Lineup
Configuration Type Detecting distance Connection method Cable length Output Model Weight
Thrubeam
Miniature slim type
1.2 m 47.24"
Cable
1 m 3.28' NPN PR-M51N1 Approx. 42 g
3 m 9.84'NPN PR-M51N3
Approx. 90 gPNP PR-M51P3
M8 4-pin *1
120 mm 4.72" *2
NPN PR-M51CN
Approx. 26 gPNP PR-M51CP
M8 3-pin Light-on *1 PNP PR-M51C3PL
M8 3-pin Dark-on *1 PNP PR-M51C3PD
Flat type
0.6 m 23.62"
Cable
1 m 3.28' NPN PR-F51N1 Approx. 36 g
3 m 9.84'NPN PR-F51N3
Approx. 80 gPNP PR-F51P3
M8 4-pin *1
120 mm 4.72" *2
NPN PR-F51CN
Approx. 20 gPNP PR-F51CP
M8 3-pin Light-on *1 PNP PR-F51C3PL
M8 3-pin Dark-on *1 PNP PR-F51C3PD
Reflective with Background Suppression
Miniature slim type
1 to15 mm 0.04" to 0.59"
Cable
1 m 3.28' NPN PR-MB15N1 Approx. 21 g
3 m 9.84'NPN PR-MB15N3
Approx. 45 gPNP PR-MB15P3
M8 4-pin *1120 mm 4.72" *2
NPN PR-MB15CN
Approx. 13 gPNP PR-MB15CP
M8 3-pin Light-on *1 PNP PR-MB15C3PL
1 to 30 mm 0.04" to 1.18"
Cable
1 m 3.28' NPN PR-MB30N1 Approx. 21 g
3 m 9.84'NPN PR-MB30N3
Approx. 45 gPNP PR-MB30P3
M8 4-pin *1120 mm 4.72" *2
NPN PR-MB30CN
Approx. 13 gPNP PR-MB30CP
M8 3-pin Light-on *1 PNP PR-MB30C3PL
Flat type
1 to 15 mm 0.04" to 0.59"
Cable
1 m 3.28' NPN PR-FB15N1 Approx. 18 g
3 m 9.84'NPN PR-FB15N3
Approx. 40 gPNP PR-FB15P3
M8 4-pin *1120 mm 4.72" *2
NPN PR-FB15CN
Approx. 10 gPNP PR-FB15CP
M8 3-pin Light-on *1 PNP PR-FB15C3PL
1 to 30 mm 0.04" to 1.18"
Cable
1 m 3.28' NPN PR-FB30N1 Approx. 18 g
3 m 9.84'NPN PR-FB30N3
Approx. 40 gPNP PR-FB30P3
M8 4-pin *1120 mm 4.72" *2
NPN PR-FB30CN
Approx. 10 gPNP PR-FB30CP
M8 3-pin Light-on *1 PNP PR-FB30C3PL
*1 Cable is sold separately. *2 Length between the main unit and connector.
10-30 VDC
0 V
Brown/�
Blue/�
White/�
Black/�
Output1
Output2Ove
rcurr
ent
pro
tect
ion c
ircu
it
Sens
or m
ain
circ
uit
Load
Load
10-30 VDC
Sens
or m
ain
circ
uit
Ove
rcurr
ent
pro
tect
ion c
ircu
it
0 V
Load
Brown/➀
Blue/➂
White/➁
Black/➃
Output1
Output2
Load
10-30 VDC
Sens
or m
ain
circ
uit
0 V
Brown/➀
Blue/➂
11
❚ Extension Cable
NPN type : Reflective & Thrubeam receiver Thrubeam transmitterPNP type : Reflective & Thrubeam receiver
Specifications Material Appearance Connection method Length Model Weight
Standard
Cable: PVCConnector: Brass nickel plating M8 4-pin
2 m 6.56' OP-73864 55 g
10 m 32.81' OP-73865 220 g
Cable: PVCConnector: Zinc nickel plating M8 3-pin 2 m 6.56' OP-87627 80 g
Chemical resistant
Cable: PVCConnector: SUS316L
M8 4-pin 2 m 6.56' OP-87621 75 g
M8 3-pin 2 m 6.56' OP-87622 60 g
Straight type
❚ I/O circuit diagram
❚ Enclosure ratings
Enclosure ratingConector type
Cable typew/ standard extension cable w/ chemical resistant extension cable
IP67IEC60529
✓ ✓ ✓
IP69KDIN40050-9
– – ✓
ECOLAB,Diversey
– ✓* ✓*
M8 Connector pin layout (3-pin type) 1 3
4
M8 Connector pin layout (4-pin type) 12
34
* Have passed resistance tests with cleaning agents from multiple manufactures.
Screw length
12
Type Model Material/Weight
Flat type standard mounting bracket(M3 screw x 2 supplied)Qty: 1
PR-B01SUS316L
Approx. 8 g
Flat type rear mounting bracket(M3 screw x 2 supplied)Qty: 1
PR-B02SUS316L
Approx. 10 g
Miniature slim type standard mounting bracket(M3 screw x 2, plate nut supplied)Qty: 1
PR-B03SUS316L
Approx. 8 g
Miniature slim type rear mounting bracket(M3 screw x 2, plate nut supplied)Qty: 1
PR-B04
SUS316LApprox. 10 g
Miniature slim type side mounting bracket(M3 screw x 2, plate nut supplied)Qty: 1
PR-B05
❚ Mounting bracket
Type Model Material/Weight
Adjustable bracket for the miniature slim type(M3 screw x 2 supplied) OP-87404 Zinc nickel plating
Approx. 95 g
Locking screw for adjustable bracket
Screw length:45 mm 1.77" OP-87406 Iron nickel plating
Approx. 70 g
Screw length: 65 mm 2.56" OP-87407 Iron nickel plating
Approx. 80 g
Adjustable mount for the flat type mounting bracket OP-87664 Zinc nickel plating and others
Approx. 190 g
Mounting bracket for the flat type(M3 screw x 4, plate nut x 1 for the compact slim/flat types supplied)
200 mm 7.87" OP-87665 SUS304Approx. 77 g
130 mm 5.12" OP-87666 SUS304Approx. 50 g
❚ Mounting bracket (adjustable bracket)
❚ AccessoryType Model Material/Weight
Plate nut (for the flat type) Qty: 2(M3 screw x 4 supplied)
OP-87667SUS316L
Approx. 1 g
Plate nut (for the miniature slim type) Qty: 2(M3 screw x 4 supplied)
OP-87668SUS316L
Approx. 2 g
Spacer (for the flat type) Qty: 2 x 2(M3 screw x 4 supplied)
OP-87669SUS303
Approx. 1 g
Slit, ø0.5 (for the flat type) Qty: 1Detecting distance: 30 mm 1.18" *
OP-87670
SUS304Approx. 1 g
Slit, 0.5 x 3 (for the flat type) Qty: 1Detecting distance: 120 mm 4.72" *
OP-87671
Slit, ø0.5 (for the miniature slim type) Qty: 1Detecting distance: 30 mm 1.18" *
OP-87672
Slit, 0.5 x 3 (for the miniature slim type) Qty: 1Detecting distance: 180 mm 7.09" *
OP-87673
OP-87406+87664+87666
OP-87404+87406+87668
* Dedicated to the thrubeam type. The detecting distance is when attached to both the transmitter and receiver.
13
Appearance Miniature slim Flat
Type Thrubeam Reflective with Background Suppression Thrubeam Reflective with Background Suppression
Model
NPN output
Cable (1 m 3.28') PR-M51N1 PR-MB15N1 PR-MB30N1 PR-F51N1 PR-FB15N1 PR-FB30N1
Cable (3 m 9.84') PR-M51N3 PR-MB15N3 PR-MB30N3 PR-F51N3 PR-FB15N3 PR-FB30N3
M8 connector 4-pin PR-M51CN PR-MB15CN PR-MB30CN PR-F51CN PR-FB15CN PR-FB30CN
M8 connector 3-pin -
PNP output
Cable (1 m 3.28') -
Cable (3 m 9.84') PR-M51P3 PR-MB15P3 PR-MB30P3 PR-F51P3 PR-FB15P3 PR-FB30P3
M8 connector 4-pin PR-M51CP PR-MB15CP PR-MB30CP PR-F51CP PR-FB15CP PR-FB30CP
M8 connector 3-pin*1 PR-M51C3PDPR-M51C3PL
PR-MB15C3PL PR-MB30C3PLPR-F51C3PDPR-F51C3PL
PR-FB15C3PL PR-FB30C3PL
Detectable distance 1.2 m 3.94' 1 to 15 mm0.04" to 0.59"
1 to 30 mm0.04" to 1.18" 0.6 m 1.97' 1 to 15 mm
0.04" to 0.59"1 to 30 mm
0.04" to 1.18"Max. distance at which the sensor turns OFF(white paper*2) - 20 mm 0.79" 43 mm 1.69" - 20 mm 0.79" 47 mm 1.85"
No. of control outputs*1 2 : 1 Light-ON, 1 Dark-ON
Output operation*1Output 1 Dark-ON Light-ON Dark-ON Light-ON
Output 2 Light-ON Dark-ON Light-ON Dark-ON
Response time*1Output 1 ON -> OFF: 0.5 ms, OFF -> ON: 0.5 ms
Output 2 ON -> OFF: 2.7 ms, OFF -> ON: 0.5 ms
Sensitivity adjustment None
Spot diameter - Approx. ø3 mm ø0.12" (at 15 mm 0.59")
Approx. ø5.5 mm ø0.22" (at 30 mm 0.18") -
Approx. 2.5 x 4.5 mm 0.10" x 0.18"
(at 15 mm 0.59")
Approx. ø5 mm 0.20" (at 30 mm 0.18")
Light source 4 element, Red LED (650 nm)
Mutual interference prevention - 4 units - 4 units
Indicator Output indicator (orange), Stable operation indicator (green), Thrubeam transmitter: power indicator (green)
Power voltage 10 to 30 VDC, including 10% ripple (P-P)
Power consumption Transmitter: 11 mAReceiver: 16 mA 19 mA Transmitter: 11 mA
Receiver: 16 mA 19 mA
Control output
NPN output type: NPN open collector, PNP output type: PNP open collector30 VDC or less, 50 mA or less
Residual voltage: 1.0 V or less at 10 mA or less, 1.5 V or less at 10 to 30 mA, 2.0 V or less at 30 to 50 mALeakage current: 0.3 mA or less at 3 kΩ of load resistance, 0.5 mA or less at 1 kΩ of load resistance, 1.5 mA or less at 0.2 kΩ of load resistance
Protection circuit Protection against reverse power connection, output overcurrent, power supply surge, output surge
Environmental resistance
Enclosure rating IP67 (IEC60529), IP69K (DIN40050-9)*3, 4X, 6P, 13 (NEMA250)
Ambient light Incandescent lamp: 5000 lux or less, Sunlight: 20000 lux or less
Ambient temperature -25 to +55°C -13°F to +131°F (No freezing)
Storage temperature -25 to +75°C -13°F to +167°F
Ambient humidity 35 to 85% RH (No condensation)
Shock resistance 1000 m/s2 in X, Y, Z axis directions respectively 6 times
Vibration resistance 10 to 55 Hz, 1.5 mm 0.06" double amplitude in the X, Y, and Z directions, 2 hours respectively
Insulating resistance 20 MΩ or more (500 VDC)
Withstand voltage 1000 VAC, 50/60 Hz, 1 min
MaterialCase: SUS316L, Indicator cover/Lens cover: Polysulfone, Cable: PVC, Cable protection: PMP, Filler: Polyester resin,
Connector (connector type only): Brass nickel plating/Polyester elastomer
Weight
1 m 3.28' cable Approx. 42 g Approx. 21 g Approx. 36 g Approx. 18 g
3 m 9.84' cable Approx. 90 g Approx. 45 g Approx. 80 g Approx. 40 g
M8 connector Approx. 26 g Approx. 13 g Approx. 20 g Approx. 10 g
Accompanying items Instruction Manual
❚ Specifications
*1 The M8 connector (3 pin) type has 1 control output. If "D" is at the end of the part number, the sensor is equipped with a Dark-ON output. If "L" is at the end of the part number, the sensor is equipped with a Light-ON output. Example: The PR-M51C3PL has a Light-ON output.*2 Typical value.*3 Cable type only.
ø0.13ø3.2
Transmitting point/Receiving point
ø2.6 ø0.10",(Transmitter) 2 cores (brown/blue),(Receiver) 4 cores (brown/blue/black/white): 0.08 mm2
Cable length:1 m 3.28'(PR-F51N1), 3 m ø9.84'(PR-F51*3)
Indicator
0.32"8
1.06"27
0.26"6.5
0.87"22
0.50"12.7
R3 R0.12"
0.18"4.5
0.06"1.5
0.09"2.3
0.55"14
Indicator
Receiving point
Transmitting point
0.18"4.5
0.06"1.5
2.3 0.09"
ø0.10"ø2.6
1.06"27
0.22"5.5
0.39"10
0.87"22
0.26"6.5
5.79"(147)
1.03"(26.2)
ø0.35"(ø9)
0.32"8
0.55"14ø0.13
ø3.2
R3 R0.12"
Indicator
ø0.10"ø2.6
Transmitting point/Receiving point
1.06"27 0.50"
12.7
0.87"22
0.26"6.5
5.79"(147)
1.03"(26.2)
ø0.35"(ø9)
0.32"8
0.55"14
0.18"4.5
0.06"1.5
2.3 0.09"
ø0.13ø3.2
R3 R0.12"
0.22"5.5
0.39"10
Indicator
Cable length:1 m 3.28'(PR-F*1), 3 m ø9.84'(PR-F*3)
Transmitting point
Receiving point
ø2.6 ø0.10",4 cores (brown/blue/black/white):0.08 mm2
0.18"4.5
0.06"1.5
0.09"2.3
1.06"27
0.87"22
0.26"6.5
0.55"14
0.32"8
ø0.13ø3.2
R3 R0.12"
10 0.39"Transmitting point/Receiving point
Indicator
1.06"26.9
0.30"7.5
0.51"13
0.23"5.9
5.87"(149)
1.03"(26.2)
ø0.28"ø7.1
ø0.10"ø2.6
ø0.35"(ø9)
0.32"8.2
0.59"15
4.2 0.17"
0.01"0.3
0.30"7.5
0.08"× ø0.13"
2×ø3.2 Indicator
Receiving point
Transmitting point
1.06"26.9
0.23"5.9
5.87"(149)
1.03"(26.2)
ø0.28"ø7.1
ø0.10"ø2.6
ø0.35"(ø9)
10 0.39"
0.51"13
0.32"8.2
0.17"4.2
0.22"5.5
0.59"15
4.2 0.17"0.08"× ø0.13"
2×ø3.20.01"
0.3
0.30"7.5
0.08"× ø0.13"
2×ø3.2Transmitting point/Receiving point Indicator
ø2.6 ø0.10",(Transmitter) 2 cores (brown/blue),(Receiver) 4 cores(brown/blue/black/white): 0.08 mm2
Cable length:1 m 3.28'(PR-M*1), 3 m ø9.84'(PR-M*3)
7.5 0.30"10 0.39"
1.06"26.9
0.23"5.9
0.51"13
0.32"8.2
ø0.28"ø7.1
0.01"0.3
0.30"7.5
4.2 0.17"
15 0.59"
Indicator
ø2.6 ø0.10",4 cores (brown/blue/black/white):0.08 mm2
Cable length:1 m 3.28'(PR-M*1), 3 m ø9.84'(PR-M*3)
Receiving point
Transmitting point
7.5 0.30"0.08"× ø0.13"
2×ø3.2
1.06"26.9
0.23"5.9
0.51"13
0.32"8.2
ø0.28"ø7.1
0.01"0.3
4.2 0.17"
15 0.59"
10 0.39"
0.17"4.25.5
0.22"
14
PR-F51N1/F51N3/F51P3
PR-F51CN/F51CP/ F51C3PL/F51C3PD
PR-M51CN/M51CP/M51C3PL/M51C3PD
PR-FB15CN/FB15CP/FB30CN/FB30CP/ FB15C3PL/FB30C3PL
PR-MB15CN/MB15CP/MB30CN/ MB30CP/MB15C3PL/MB30C3PL
PR-FB15N1/FB30N1FB15N3/FB15P3/FB30N3/FB30P3
PR-M51N1/M51N3/M51P3
PR-MB15N1/MB30N1/MB15N3/MB15P3/MB30N3/MB30P3
ø0.5 ø0.01"
Material: SUS304t = 0.2 0.01"
0.50"12.8
0.17"4.2
0.32"8
0.87"22.2
0.48"12.3
14.6 0.57"
4 0.16"
0.20"5
0.20"5.1
Material: SUS304t = 0.2 0.01"
0.17"4.2
0.20"5.1
14.6 0.57"4 0.16"
0.50"12.8
0.32"8
22.2 0.87"
0.48"12.30.20"5
0.12"30.02"0.5
Material: SUS304t = 0.2 0.01"
13.2 0.52"
10.2 0.40"
8.7 0.34"0.31"7.9
0.30"7.5
0.43"11
0.59"15
0.83"21
ø0.01"ø0.5
Material: SUS304t = 0.2 0.01"
13.2 0.52"
0.5 0.02"
10.2 0.40"
8.7 0.34"
0.30"7.5
0.12"3
0.43"11
0.59"15
0.83"21
0.31"7.9
20 0.79"
1.5 0.06"
11 0.43"12 0.47"
0.45"11.5
Material: SUS316LSupplied accessory: Screw x 2 (M3, 14 mm 0.55", stainless steel),Plate nut (SUS316L)
0.06"1.5
0.13"3.2
0.13"3.2
0.13"3.2
0.16"4
0.13"3.20.14"
3.5
0.98"25
0.16"4
0.16"4
0.22"5.5
0.22"5.5
0.33"8.5
0.59"15
ø5.5
ø0.22
"ø3.2 ø0.13"
Material: SUS303Supplied accessory: Screw x 4(M3, 10 mm 0.39", stainless steel)
0.14"3.5
17 0.67" 10 0.39"
Material: SUS316LSupplied accessory: Screw x 2(M3, 6 mm 0.24", stainless steel)
4×M3,P=0.50.02"
0.06"1.5
0.32"8 0.13"
3.2
0.18"30
0.59"15
0.13"3.2
0.20"5
0.06"1.5
0.63"160.35"
90.24"
6
1.5 0.06"
Material: SUS316LSupplied accessory: Screw x 2(M3, 6 mm 0.24", stainless steel)
4×M3,P=0.50.02"
0.18"30
0.59"15
0.32"8
0.32"8
0.53"13.5
0.13"3.2
0.13"3.2
0.20"5
1.00"25.5
0.26"(6.5)
0.63"16
0.06"1.5
0.20"5 0.63"
16
16 0.63"
Material: SUS316LSupplied accessory: Screw x 2 (M3, 12 mm 0.47", stainless steel),Plate nut (SUS316L)
1 0.04"
3.2 0.13"
2 0.08"
0.06"1.5
1.57"40
0.69"17.5
0.26"6.5
0.16"4
0.32"8
0.28"7
0.08"2
0.13"3.2
0.59"15
0.13"3.2
0.13"3.2
0.69"17.5
1.5 0.06"
Material: SUS316LSupplied accessory: Screw x 2 (M3, 14 mm 0.55", stainless steel),Plate nut (SUS316L)
0.22"5.5
0.45"11.5
0.43"11
0.13"3.2
3.2 0.13"
0.45"11.5 0.06"
1.5
0.33"8.5
0.16"4
0.16"4
4 0.16"3.5 0.14"
0.13"3.2
0.59"15
0.98"25
0.22"5.5
0.13"3.2
26.5 1.04"17 0.67"
Material: SUS316LSupplied accessory: Screw x 4(M3, 10 mm 0.39", stainless steel)
2×M3,P=0.5 0.02"
0.55"14
0.32"8
1.5 0.06"6 0.24"
2×M3,P=0.5 0.02"
Material: SUS316LSupplied accessory: Screw x 4(M3, 14 mm 0.55", stainless steel)
0.83"21
0.59"15
1.5 0.06"6 0.24"
15
OP-87672 OP-87673OP-87671OP-87670
PR-B01 PR-B02 PR-B03 PR-B04 PR-B05
OP-87669OP-87667 OP-87668
Unit: mm inch
36.819.5 0.77"
Zinc die-cast
8.3
50.20"
35.9
Nut (M5, iron nickel plating)
spot facing ø20, ø24
SUS430
3.217.4ø27 ø22
ø12
1525.4R0.53"
124
21.5 0.85"
4 × ø3.5 0.16" × ø0.14"
d=3 0.12"
35 1.38"
ø12
Hexagon socket head cap screw
(M5, length 15 mm 0.59", across flats 4 mm 0.16", iron nickel plating)
8.3
12.54.33.3
0.33"
0.49"
0.13"
0.17"
ø0.47"ø0.79" ø0.94"
1.00" 0.59" 1.41"
R13.5
0.47"0.16"
ø0.47"
ø1.06" 0.69"
1.45"
0.13"
ø0.87"
0.33"
L=45 mm 1.77" : OP-87406L=65 mm 2.56" : OP-87407
10 L
(32)
M10×P1.5
Across flats17 0.67",thickness 8 0.32"
Iron nickel plating
ø16
2 x ø21 0.08" x ø0.83", thickness 2 0.08"
ø0.63"
0.39"
(1.26")
19.50.77"
12.50.49"
180.71"
0.33"8.3
0.20"5
0.59"15
1.00"25.4
1.41"35.9
13.50.53"
120.47"16
0.63"
21.50.85"
4 × ø3.5 0.16" × ø0.14"
L
L=50mm 1.97" : OP-87406L=70mm 2.76": OP-87407
1.05"26.7
47.5 1.87"54.5
35 1.38"
19.512.5
ø0.47"ø12
ø0.47"ø12
Hexagon socket head cap screw
(M5, length 15 mm 0.59", across flats 4 mm 0.16", iron nickel plating)
Nut (M5, iron nickel plating)
Brass nickel plating
Zinc die-cast
ø1.06"ø27
0.77" 2.15"
0.49"
0.11"(3)
2×ø3.5ø0
.14"
L
0.96"24.5 1
L=200mm 7.87" : OP-87665L=130mm 5.12" : OP-87666Material: SUS304Supplied accessory: Screw x 4 (M3, stainless steel), Plate nut x 2 (SUS316L)
ø0.47"
ø12
ø0.35
"
ø9
0.67"17
0.20"5
0.20"5
0.14"3.5
3.5 0.14"8 0.32"
1.00"25.4
2 0.08"
2.76"(70)
0.59"15
16
OP-87404
OP-87665/87666OP-87664
OP-87406/87407
OP-87406 (87407) + OP-87404
ø9.56.7
ø9
1.05"
2000 (OP-73864)/10000 (OP-73865)
ø3.7 (4×0.28 mm2)
ø0.35"
ø0.37"
ø0.15"
78.74" 393.7"0.26"
26.7
ø0.19" ø4.7(4x0.25mm2)
0.39"10
1.26"32
78.74"2000
ø0.19"ø4.4(3x0.25mm2)
0.39"10
1.26"32
78.74"2000
1.33"33.7M8
ø10ø0.39"
78.74"2000
ø0.17"ø4.4 (3x0.25mm2)
17
CAD DATA DOWNLOAD
www.keyence.com/CADG
OP-73864 / 73865
OP-87627
OP-87621 OP-87622
Unit: mm inch
M8 Connector pin layout (3-pin type)
13
4
M8 Connector pin layout (4-pin type)
No. Color
➀ Brown
➁ White
➂ Blue
➃ Black34
12
18
Optical axis adjustment issimple with the built-in alignment indicator
Laser marked tags eliminate possible contamination caused by deteriorating paint or sticker type labels
High power, self contained photoelectric sensors
One-touch mounting bracket simplifies installation
PZ-G Series LED
SELF-CONTAINED PHOTOELECTRIC SENSOR
Detecting distance
High-Power Dual LED-typeHigh-power thrubeam typePZ-G52
4-element red LED-type
Related Products
20 m 65.6'Thrubeam typePZ-G51 1 m 3.3'
Reflective type PZ-G41
Retro-reflective type PZ-G61 1 m 3.3'40 m 131.2'
19
Best Detection Ability in its class with CMOS laser stability
One-touch setup and Digital display simplify operation
All-Purpose Laser Photoeye
High enclosure rating and Stainless steel body (SUS316L)ensure durability and long life
LR-Z Series CMOS Laser
SELF-CONTAINED CMOS LASER SENSOR
Detecting distance
Short-range type
35 to 100 mm 1.38 to 3.94'' 35 to 250 mm 1.38 to 9.84''LR-ZB100
Long-range type
LR-ZB250
Related Products
KA210-1053
Copyright (c) 2012 KEYENCE CORPORATION. All rights reserved. PR-KA-C-US 1093-3 611684 Printed in Japan
KEYENCE CORPORATION OF AMERICASales & Marketing Head Office 1100 North Arlington Heights Road, Suite 210, Itasca, IL 60143 PHONE: 888-539-3623 FAX: 855-539-0123
SAFETY INFORMATIONPlease read the instruction manual carefully in order to safely operate any KEYENCE product.
The information in this publication is based on KEYENCE’s internal research/evaluation at the time of release and is subject to change without notice.
1 - 8 8 8 - 5 3 9 - 3 6 2 31-888-KEYENCE
CALL TOLL FREE
T O C O N TA C T Y O U R L O C A L O F F I C E www.keyence.comE-mail : [email protected]
LR-ZSERIES
Self-containedCMOS Laser Sensor
PR-M/FSERIES
Self-contained Miniature Photoelectric Sensor