New Product Introduction Flatbed Cutting Plotter FC4500 Series · The FC4500 series plotters...
Transcript of New Product Introduction Flatbed Cutting Plotter FC4500 Series · The FC4500 series plotters...
Graphtec CorporationOverseas Sales and Marketing Division
New Product Introduction Flatbed Cutting Plotter
FC4500 Series
New Product Introduction New Product Introduction Flatbed Cutting Plotter Flatbed Cutting Plotter
FC4500 SeriesFC4500 Series
Desk top flatbed type cutting plotterSuitable for prototyping or small production runs in rigid materials
New Product Introduction FC4500 Series
Overseas Sales and Marketing Div.
Advanced Flatbed Cutting Plotter for Plotting, Cutting and Creasing/Scoring applications.Expand into the label and package markets by upgraded registration mark sensor and developed new tools.
FC4510-60with stand option
FC4500-50
◆ High-speed plotting 750mm/s / 1Gusable as test bead machine for tapping or response test in keyboard or touch screen.
◆ ARMS built-in. Cutting Master 2 is supplied as standard accessory.
◆ Corresponds to USB2.0 interface.
◆ Possible to attach 0.9mm diameter cutting blade to magnet type pen holder.
Product Concept of FC4500 Series
New Product Introduction FC4500 Series
Overseas Sales and Marketing Div.
FC4500 seriesFC4500 seriesModel Effective cutting area Media hold-downFC4500- 50 590mm x 430mm Electrostatic adhesion
or Adhesive sheet
FC4510- 60 860mm x 600mm Adhesive mator Adhesive sheet
Product Line Up
590
430 Electrostatic
FC4500-50
Adhesivesheet
860
600
Adhesivemat
FC4510-60
Adhesivesheet
Max. force 600gf, speed 750mm/sec
New Product Introduction FC4500 Series
Overseas Sales and Marketing Div.
FC4500 series Main Features
1.1. ARMSARMS AAdvanced dvanced RRegistration egistration MMark ark SSensing systemensing system
2.2. Simple creasing functionSimple creasing function
3.3. Advanced reverseAdvanced reverse--side cutting/creasing functionside cutting/creasing function
4.4. Repeated cutting functionRepeated cutting function
5.5. 22--Tool holders for easy selectionTool holders for easy selection
6.6. Other new functionsOther new functions
New Product Introduction FC4500 Series
Overseas Sales and Marketing Div.
POPPOP
Sticker, LabelSticker, Label
PackagePackage
Auto adjustment of ARMS sensitivity expand readable medias.
Blue color mark
+Silver color background
1. Create registration mark 2. Read registration mark
3. Cutting
1. Built-in ARMS function
The built-in registration mark sensor furthermore simplifies contour cutting of printed materials.When combined with the Cutting Master 2 software provided as a standard accessory, the ARMS function can be utilized to its maximum potential.
White color mark
+Blue color background
(Note) It may not be able to read when contrast between background and registration mark are low or high lustrous media is used.
(Advanced Registration Mark Sensing system)
New Product Introduction FC4500 Series
Overseas Sales and Marketing Div.
A simple creasing function to create fold lines for clean folding on micro-flute and cardboard has been enabled.
Guidelines for selecting single-line, double-line, or triple-line creasing
• Single-line creasingMaterials of a thickness of up to 0.1 mm
• Double-line creasingCardboard of a thickness of approximately 0.1to 0.5 mm
• Triple-line creasingCorrugated cardboard of a thickness of approximately 0.3 to 0.5 mm (rigid cardboard)
Line spacing
2. Simple creasing function
Point 1:Up to three fold lines can be selected.
If two or three fold lines have been selected, the spacing between the lines can be also specified.
Repeated creasing operations also can be specified for each of the lines.
Creasing start point also can be specified.
Point 2:In consideration of the characteristics of corrugated card board (F and G flutes),the creasing force and the cutting force can be specified independently in both theX and Y directions. This prevents surface damage caused by an excessive force.
New Product Introduction FC4500 Series
Overseas Sales and Marketing Div.
The FC4500 series plotters feature reverse-side cutting and creasing functions to prevent traces of the creasing operation from appearing on the printed surface.(A plain and simple operation is provided when the Cutting Master 2 is used.)
3. Advanced reverse-side cutting/creasing
1: The media is loaded on the FC4500 with face up condition.2: The data for registration mark and cutting/creasing is sent from the Cutting Master 2.3: FC4500 cuts out the registration mark in order to be able to read it from the reverse side.4: The media is flipped over and is loaded on the FC4500. It is face down condition.5: FC4500 starts reading the registration mark and then it makes creasing/cutting the media
from the reverse side.
Reading the registration marks from the printed side.
Reading the registration marks from the reverse side and creasing/cutting media.Cutting out the
registration marks from the printed side.
Cut out area
New Product Introduction FC4500 Series
Overseas Sales and Marketing Div.
Send a data..... Cutting 1st, 2nd,3rd... 9th
Overlay function can make FC4500 cut a thick mediawhich is difficult to cut by a single cutting operation.
4. Overlay Function (Repeated Cutting Function)
The various media can be cut with multi pass
cutting!!
5. 2 tool Holders of FC4500-50FC4500-50 can be equipped with 2 kind of tools simultaneously.
1st Holder : CB15U/-K30/-K20/UB/CB09/CP001 (Max. Force 600gf & Speed 75cm/s)2nd Holder : Pen/CB09 (Max. Force 300gf & Speed 30cm/s)
PHP32 series can be mounted to screw typetool holder
PHP31 series can bemounted to screw type and magnet type tool holder(PHP31-CB09-HS Only)
New Product Introduction FC4500 Series
Overseas Sales and Marketing Div.
6. Other New Functions
Perforation Cutting Line can be cut with perforated line
Short line Segment Setting It is possible to set the speed and accelerationseparately for the short lines and the long lines.
Tool Carriage Moving SpeedMoving speed can be changed between low and highusing NEXT key. Position + Next key => High speed
Tool Exchange AssistingNot only FC4510-60(2pen type), FC4500-50 (1pen type)also can be used for making a package sample or POPby exchanging a cutting blade with creasing tool !!
CreasingCutting
FC4500 series makes your attention by alarm and pauses job in order to be able toexchange tool when cutting plotter receives pen change command.
Exchange toolCreasing CuttingAlarm sound
CHANGE TOOL !
PRESS ENTER KEY !!
New Product Introduction FC4500 Series
Overseas Sales and Marketing Div.
Spec Comparison 1
FC4500-50 FC4510-60 FC4200-50/60 FC4210-60
Tool 1: Holding withscrew (max. 500gf)
Tool 2: Holding withscrew (max. 1kgf)
Tool 2: Holding withmagnet (max. 300gf)
Tool 2: Holding withscrew (max. 600gf)
Tool 2: Holding withmagnet (max. 300gf)
Tool 2: Holding withscrew (max. 600gf)
Cutting Force parameter Tool 1: 1,2,3,,,,,,40Tool 2: 2,4,6,,,,,,80
Tool 1: 1,2,3,,,,48Tool 2: 1,2,3,,,,30
Tool 1: 1,2,3,,,,48Tool 2: 1,2,3,,,,48
Tool 1: 1,2,3,,,,48Tool 1: 1,2,3,,,,30
Tool 2: 1,2,3,,,,48Tool 2: 1,2,3,,,,48
Settable Speedparameter
Tool 1: 1,2,3,,,,,,,40cm/sTool 2: 1,2,3,,,,,,,40cm/s
Tool 1: 1,2,3,,,,,,,75cm/sTool 2: 1,2,3,,,,,,,30cm/s
Tool 1: 1,2,3,,,,,,,75cm/sTool 2: 1,2,3,,,,,,,30cm/s
Tool 1: 1,2,3,,,,,,,60cm/sTool 2: 1,2,3,,,,,,,30cm/s
Tool 1: 1,2,3,,,,,,,60cm/sTool 2: 1,2,3,,,,,,,30cm/s
Acceleration Max. 0.6G
Interface USB2.0(Full Speed)and RS-232C
USB2.0(Full Speed)and RS-232C
USB2.0(Full Speed)and RS-232C
Centronicsand RS-232C
Centronicsand RS-232C
Condition setting No. 8
Simple Creasing Available
Initial CuttingForce setting Available N/A Available
Cutting Force setting X-axis and Y-axisseparately
The same setting in X-axis and Y-axis
X-axis and Y-axisseparately
Model
Specification
Pen Holding MethodTool 1: Holding with screw (max. 600gf) Tool 1: Holding with screw (max. 600gf)
Available
8 4
Available N/A
FC4500 FC4200FC2250
Max. 1G Max. 0.6G
Selectable to set force for X-axis and Y-axisseparately or the same
New Product Introduction FC4500 Series
Overseas Sales and Marketing Div.
Spec Comparison 2
FC4500-50 FC4510-60 FC4200-50/60 FC4210-60
ARMS Ver. 3.0, Supported four(4) marks mode
Reverse-side Cuttingfunction
Available, NOTsupported by ARMS N/A Available, NOT
supported by ARMS
Overlay function Available, Selectablenumber of pass
Short Line Segmentsetting N/A
Perforate Cuttingfunction Available N/A Available
Blade-tip Initial ControlPosition
2mm Below / Outside(lower left corer)
Manual Tool Exchangeassistance Available
Beeper View N/A
Tool Movement Speed(in tool up) Speed can be set
Tool Carriage MovementSpeed (in position key)
Speed is changed fromlow to high by pressing
NEXT key
Available, Speed and Acceleration can be set forshort line N/A
Model
Specification
N/A
2mm Below / Outside (lower left corner) / Outsideof Y-axis 2mm Below / Outside (lower left corner)
Available N/A
Ver. 1.0, Not supported by the softwareVer. 4.0, Supported sensitivity adjustment
FC2250FC4500 FC4200
N/A
Speed is changed from low to high by pressingNEXT key
Speed is automatically changed from low to highby holding position key in a few seconds
Speed and Acceleration can be set Speed can be set
Available
Available, Selectable number of pass, cutting forcefor 1st pass and 2nd pass, and mode (ALL or
BLOCK)
Available, supported by ARMS
Available
New Product Introduction FC4500 Series
Overseas Sales and Marketing Div.
Main Target of FC4500 seriesMain Target of FC4500 seriesShoe PatternSandblast MaskSeal & Label
Print on DemandElectric Industry
Application Specially FocusingApplication Specially Focusing
123456
Stencil
123456
New Product Introduction FC4500 Series
Overseas Sales and Marketing Div.
Target Application 1Target Application 1
POP
Print on Demand Creasing
Die Cut
Small package for Food, Cosmetic products,Electric products, and etc.
Making sample, prototype ofDressing Package by Micro flute or Card board
FC4500 is suitable to make it by using ARMS and Reverse-side cutting function.
Usage of micro-flute is increasing at the recent time by ecological awareness, and also considered the future trend.FC4500 is suitable to cut the G or F grade of micro-flute.
3D POP and a wide variety of POP in sample or small production It is laminated or pouched in
some case, media also can be cut by FC4500.
High cutting quality is required. FC4500 can provide it.
New Product Introduction FC4500 Series
Overseas Sales and Marketing Div.
Electrical Industry
Electric Industry
Target Application 2Target Application 2
For FPD (Flat Panel Display)Protection Film, Polarization Film, Condenser Film, etc.
Mostly thinner PET films are used for FPD.
FC4500 cutting plotter series is very suitable for making prototype.
Making sample, prototype of FPC (Flexible Print Circuit)
FPC is created in multiple layers. The base film is 12 micrometer from 50 micro meter thick. The conductive foil which is 12 micro meter from 50 micro meter is glued on the base.FPC is more thin comparing a typical rigid board which has thickness of 0.3mm to 1.6mm.
FC4500 series cutting plotter are very suitable for cutting it.
New Product Introduction FC4500 Series
Overseas Sales and Marketing Div.
Screen Printing
Touch Panel
Target Application 3Target Application 3In recent years,For portable game machine and/or PDA, the demand for testing touch screen has been dramatically increased.
FC4500 series has 75cm/s as moving speed and 1G acceleration. It has been improved the capability for using FC4500 to touch screen test.
Touch panel test
Label Label or nameplate is printed on demand in small quantity production. FC4500 is suitable for cutting without cutting die.
Membrane switch,Printed PET
Printed panel and adhesive tape which are mounted on the electrical board are cut for making prototype.Customer want to have high quality prototype.