Size Chart - Man Mat - High Quality Creasing · PDF fileSize Chart Durable and customisable...
1
Product Information Size Chart Durable and customisable Polymer Matrix MAN MAT C&K Extrusions Ltd. 12 Drayton Road Tonbridge TN9 2BE United Kingdom t: +44 1732 369698 f: +44 1732 771009 e: [email protected] manmat.com Diamond Standard Channel Height (mm) 0.3 0.4 0.5 0.6 0.7 0.8 1 1.2 Channel Width 0.6 0.6 0.7 1.0 1.5 1.7 2.3 4.0 0.7 0.7 0.8 1.1 1.6 1.9 2.5 4.5 0.8 0.8 1.0 1.2 1.7 2.1 2.7 5.0 1.0 1.0 1.1 1.2 1.9 2.3 3.0 1.1 1.1 1.2 1.4 2.1 2.5 3.2 1.2 1.2 1.3 1.5 2.3 2.7 3.5 1.3 1.3 1.4 1.6 2.5 3.0 4.0 1.4 1.4 1.5 1.7 2.7 3.2 4.5 1.5 1.5 1.6 1.9 3.0 3.5 5.0 1.6 1.6 1.7 2.1 3.2 4.0 6.0 1.7 1.7 1.9 2.3 3.5 4.5 1.9 2.1 2.5 4.0 5.0 2.3 2.7 6.0 2.5 3.0 2.7 3.2 3.5 4.0 Diamond Mini Channel Height (mm) 0.3 0.4 0.5 0.6 0.7 0.8 Channel Width 0.8 0.8 0.8 1.0 1.9 2.7 1.0 1.0 1.0 1.3 2.1 1.2 1.1 1.1 1.5 2.3 1.3 1.2 1.2 1.7 1.5 1.2 1.2 1.9 1.4 1.4 2.1 1.5 1.5 1.7 1.7 1.9 1.9 Diamond Off Centre Channel Height (mm) 0.3 0.4 0.5 0.6 0.7 0.8 1 Channel Width 0.8 1.0 1.0 1.5 2.3 2.3 3.0 1.0 1.1 1.2 1.7 2.5 2.5 1.2 1.2 1.3 1.9 2.7 2.7 1.3 1.3 1.5 2.1 3.0 1.5 1.5 1.7 2.3 1.7 1.9 2.5 2.1 2.7 2.7 Diamond Contoured Channel Height (mm) 0.5 0.6 0.7 0.8 1 Channel Width 3.0 2.1 2.3 2.5 2.7 2.3 2.5 2.7 3.0 2.5 2.7 3.0 3.2 2.7 3.2 3.5 3.0 3.5 4.0 4.0 4.5 5.0 6.0 Diamond Corrugate Channel Height (mm) 0.6 0.7 0.8 1 Channel Width 2.3 2.3 2.3 2.7 2.5 2.5 2.5 3.0 3.0 2.7 3.5 3.5 3.0 4.0 4.0 3.2 5.0 5.0 3.5 6.0 6.0 4.0 5.0 6.0 Doubles Channel Height (mm) 0.40 0.45 0.50 Channel Width 1.0 1.0 1.0 1.2 1.2 1.2 1.3 1.3 1.3 1.5 1.5 1.5 Space Between Crease Centres 3.0 3.0 3.0 3.5 3.5 3.5 4.0 4.0 4.0 4.5 4.5 4.5 5.0 5.0 5.0 10 & 12 mm 15 & 20 mm Standard polymer- based creasing matrix. Creasing matrices are available in 750 mm lengths. Creasing system for products made from corrugated board. Inside chamfering reduces tensile stress and helps avoid cracking of the surface of the material. When small distances between cutting and creasing rule are required. This is the ideal creasing system to use, suitable for small folding cartons. 7 mm 7 mm The special creasing system for double creasing with small distances between the creasing rules. 15 & 20 mm Special product for corrugated board requiring the highest quality. Enhanced bevelling avoids degradation on the surface. Unique to ManMat Long life double matrix. 12 - 15 mm Choosing the correct size use our mobile-friendly website manmat.com/calculator/ Diamond Custom only at ManMat Custom: Height / Width If the size you require is not listed, please contact [email protected] to discuss your requirements for a bespoke product Using this chart 1. Channel width should be (1.5 x board thickness) + creasing rule thickness 2. Creasing rule height should be cutting rule height - board thickness - constant base allowance of 0.15mm 3. While every effort has been made to ensure the accuracy of this chart, always double check calculations before ordering. Real-world application can vary because of other factors including relative humidity, temperature and board condition.
Transcript of Size Chart - Man Mat - High Quality Creasing · PDF fileSize Chart Durable and customisable...
Product Information
Size Chart
Durable and customisable Polymer Matrix
MAN MATC&K Extrusions Ltd.
12 Drayton RoadTonbridge
TN9 2BEUnited Kingdom
t: +44 1732 369698f: +44 1732 771009
manmat.com
Diamond StandardChannel Height (mm)
0.3 0.4 0.5 0.6 0.7 0.8 1 1.2
Cha
nnel
Wid
th
0.6 0.6 0.7 1.0 1.5 1.7 2.3 4.0
0.7 0.7 0.8 1.1 1.6 1.9 2.5 4.5
0.8 0.8 1.0 1.2 1.7 2.1 2.7 5.0
1.0 1.0 1.1 1.2 1.9 2.3 3.0
1.1 1.1 1.2 1.4 2.1 2.5 3.2
1.2 1.2 1.3 1.5 2.3 2.7 3.5
1.3 1.3 1.4 1.6 2.5 3.0 4.0
1.4 1.4 1.5 1.7 2.7 3.2 4.5
1.5 1.5 1.6 1.9 3.0 3.5 5.0
1.6 1.6 1.7 2.1 3.2 4.0 6.0
1.7 1.7 1.9 2.3 3.5 4.5
1.9 2.1 2.5 4.0 5.0
2.3 2.7 6.0
2.5 3.0
2.7 3.2
3.5
4.0
Diamond MiniChannel Height (mm)
0.3 0.4 0.5 0.6 0.7 0.8
Cha
nnel
Wid
th 0.8 0.8 0.8 1.0 1.9 2.7
1.0 1.0 1.0 1.3 2.1
1.2 1.1 1.1 1.5 2.3
1.3 1.2 1.2 1.7
1.5 1.2 1.2 1.9
1.4 1.4 2.1
1.5 1.5
1.7 1.7
1.9 1.9
Diamond Off CentreChannel Height (mm)
0.3 0.4 0.5 0.6 0.7 0.8 1
Cha
nnel
Wid
th 0.8 1.0 1.0 1.5 2.3 2.3 3.0
1.0 1.1 1.2 1.7 2.5 2.5
1.2 1.2 1.3 1.9 2.7 2.7
1.3 1.3 1.5 2.1 3.0
1.5 1.5 1.7 2.3
1.7 1.9 2.5
2.1 2.7
2.7
Diamond ContouredChannel Height (mm)
0.5 0.6 0.7 0.8 1
Cha
nnel
Wid
th 3.0 2.1 2.3 2.5 2.7
2.3 2.5 2.7 3.0
2.5 2.7 3.0 3.2
2.7 3.2 3.5
3.0 3.5 4.0
4.0 4.5
5.0
6.0
Diamond CorrugateChannel Height (mm)
0.6 0.7 0.8 1
Cha
nnel
Wid
th 2.3 2.3 2.3 2.7
2.5 2.5 2.5 3.0
3.0 2.7 3.5
3.5 3.0 4.0
4.0 3.2 5.0
5.0 3.5 6.0
6.0 4.0
5.0
6.0
DoublesChannel Height (mm)
0.40 0.45 0.50
Cha
nnel
W
idth 1.0 1.0 1.0
1.2 1.2 1.2
1.3 1.3 1.3
1.5 1.5 1.5
Spac
e B
etw
een
Cre
ase
Cen
tres
3.0 3.0 3.0
3.5 3.5 3.5
4.0 4.0 4.0
4.5 4.5 4.5
5.0 5.0 5.0
10 & 12 mm
15 & 20 mm
Standard polymer-based creasing matrix. Creasing matrices are available in 750 mm lengths.
Creasing system for products made from corrugated board. Inside chamfering reduces tensile stress and helps avoid cracking of the surface of the material.
When small distances between cutting and creasing rule are required. This is the ideal creasing system to use, suitable for small folding cartons.
7 mm
7 mm
The special creasing system for double creasing with small distances between the creasing rules.
15 & 20 mm
Special product for corrugated board requiring the highest quality. Enhanced bevelling avoids degradation on the surface.
Unique to ManMatLong life double matrix.
12 - 15 mm
Choosing the correct sizeuse our mobile-friendly website manmat.com/calculator/
Diamond Custom only at ManMat
Custom: Height / WidthIf the size you require is not listed, please [email protected] discuss your requirements for a bespoke product
Using this chart1. Channel width should be (1.5 x board thickness) +creasing rule thickness2. Creasing rule height should be cutting rule height -board thickness - constant base allowance of 0.15mm3. While every effort has been made to ensurethe accuracy of this chart, always double checkcalculations before ordering. Real-world application canvary because of other factors including relative humidity,temperature and board condition.
![MICROFOG UNIT [MATRIX MF58MT] - Nozzle Network › products › MF58MT_manual_ver0.pdf · MATRIX MF58MT Atomization Conditions Chart P6 MATRIX MF58MT “Set with elbow” characteristics](https://static.fdocuments.net/doc/165x107/5f196ed3b52e9408b2013c26/microfog-unit-matrix-mf58mt-nozzle-a-products-a-mf58mtmanualver0pdf.jpg)
