NC Rotary Tables Standard Models RNE-160, 200, 250,...
2
12 Specifications Table Model RNE-160 RNE-200 RNE-250 RNE-320 Versions available R, L R, L R, L R, L Spindle outer diameter mm 100h7 120h7 140h7 180h7 Table diameter (optional) mm (160, 200) (200, 250) 250 320 Center height mm 135 160 160 210 Center bore Nose Diameter mm 55H7 65H7 75H7 110H7 Thru Diameter mm 40 45 45 82 Table T-slot width (with faceplate) (12H8) (12H8) 12H8 14H8 Guide block width 14h7 18h7 18h7 18h7 Servo motor* Alpha 4i Alpha 4i Alpha 8i Alpha 12i Maximum motor speed rpm 4,000 4,000 3,000 3,000 Speed reduction ratio 1/90 1/90 1/120 1/120 Maximum table speed rpm 44.4 44.4 25 25 Inertia converted into motor shaft x 10 -3 kg . m 2 .09 .17 .41 .52 Clamp system Pneumatic Disc Clamp Clamp torque @72psi Nm (ft. lbs.) 250 (180) 400 (295) 600 (442) 1,000 (737) Indexing accuracy arc sec. ±12.5 ±10 ±10 ±10 Repeatability arc sec. ±2 ±2 ±3.5 ±3.5 Net Weight kg (lbs.) 44 (97) 62 (136) 107 (235) 205 (451) Allowable wheel torque Nm (ft. lbs.) 206 (152) 288 (212) 565 (416) 939 (692) Allowable work inertia kg . m 2 .48 1.25 1.95 3.77 Allowable work weight [with tailstock] kg (lbs) 75 (165) [150 (330)] 100 (220) [250 (550)] 100 (220) [250 (550)] 150 (330) [350 (770)] kg (lbs) 150/330 250/550 250/550 350/770 Allowable load when table clamped Nm (ft. lbs.) 7,840 (1,762) 13,720 (3,085) 250 (550) 350 (770) Nm (ft. lbs.) 250 (180) 400 (295) 13,720 (3,073) 19,600 (5,555) Nm (ft. lbs.) 392 (290) 980 (723) 600 (442) 1,000 (737) NC Rotary Tables Standard Models RNE-160, 200, 250, 320 COMPACT • MASSIVE CLAMP TORQUE The RNE Series tables’ offer speeds ranging from 25 to 44.4 RPM and indexing accuracies ranging from 10 to 12.5 arc seconds. These compact, high-speed, high-quality RNE Series tables offer economy line pricing while retaining high clamp torque and increased production performance. RNE-160 * Other motors & RPM available Specifications subject to change without notice www.komaprecision.com • [email protected] • 1-800-249-5662 W F L F L F Dimensions = mm W
Transcript of NC Rotary Tables Standard Models RNE-160, 200, 250,...
12
SpecificationsTable Model RNE-160 RNE-200 RNE-250 RNE-320Versions available R, L R, L R, L R, L
Spindle outer diameter mm 100h7 120h7 140h7 180h7
Table diameter (optional) mm (160, 200) (200, 250) 250 320
Center height mm 135 160 160 210
Center boreNose Diameter mm 55H7 65H7 75H7 110H7
Thru Diameter mm 40 45 45 82
Table T-slot width (with faceplate) (12H8) (12H8) 12H8 14H8
Guide block width 14h7 18h7 18h7 18h7
Servo motor* Alpha 4i Alpha 4i Alpha 8i Alpha 12i
Maximum motor speed rpm 4,000 4,000 3,000 3,000
Speed reduction ratio 1/90 1/90 1/120 1/120
Maximum table speed rpm 44.4 44.4 25 25Inertia converted into motor shaft x 10-3kg.m2 .09 .17 .41 .52
Clamp system Pneumatic Disc Clamp
Clamp torque @72psi Nm (ft. lbs.) 250 (180) 400 (295) 600 (442) 1,000 (737)
Indexing accuracy arc sec. ±12.5 ±10 ±10 ±10
Repeatability arc sec. ±2 ±2 ±3.5 ±3.5
Net Weight kg (lbs.) 44 (97) 62 (136) 107 (235) 205 (451)
Allowable wheel torque Nm (ft. lbs.) 206 (152) 288 (212) 565 (416) 939 (692)
Allowable work inertia kg.m2 .48 1.25 1.95 3.77
Allowable work weight [with tailstock]
kg (lbs) 75 (165)[150 (330)]
100 (220)[250 (550)]
100 (220)[250 (550)]
150 (330)[350 (770)]
kg (lbs) 150/330 250/550 250/550 350/770
Allowable load when table clamped
Nm(ft. lbs.)
7,840(1,762)
13,720(3,085)
250(550)
350(770)
Nm(ft. lbs.)
250(180)
400(295)
13,720(3,073)
19,600(5,555)
Nm(ft. lbs.)
392(290)
980(723)
600(442)
1,000(737)
NC Rotary Tables Standard Models
RNE-160, 200, 250, 320COMPACT • MASSIVE CLAMP TORQUE
The RNE Series tables’ offer speeds ranging from 25 to 44.4 RPM and indexing accuracies ranging from 10 to 12.5 arc seconds. These compact, high-speed, high-quality RNE Series tables offer economy line pricing while retaining high clamp torque and increased production performance.
RNE-160
* Other motors & RPM availableSpecifications subject to change without notice
www.komaprecision.com • [email protected] • 1-800-249-5662
W
F
L
FL
F
Dimensions = mm
W
13www.komaprecision.com • [email protected] • 1-800-249-5662
NC Rotary Tables Standard ModelsDimensions Drawings not to scale • Dimensions = mm
RNE-160
RNE-200
RNE-250
RNE-320
The dimensions above are for tables with a FANUC servo motor. Other motors available (dimensions may increase).
Clamping Block and Bolt Dimensions = mm
Type Q’ty T-Slot Width A B C D E F G H I J K L M
RNE-160 - 2 14 - - - - - - - 17 8 60 - 23 12
RNE-200 - 2 18 - - - - - - - 21 11 65 - 28 16
RNE-250 I 4 18 25 12 80 12 33 35 22 21 11 65 40 28 16
RNE-320 I 4 18 30 15 90 16 31 43 25 21 11 70 46 28 16
Note 1: When using a machine with a T-slot pitch other than the above, use suitable clamping blocks and bolts that are available on the market, or order custom-made ones from KOMA (opt.)Note 2: Clamping blocks are not included in RNE-160 and RNE-200.
Type IH
G
IJ
Ø M
� LD FE
KC
BA
25I
H
J
Ø M
L
www.komaprecision.com • [email protected] • 1-800-249-5662
9816
0
185190
5285
140
160
272
20
295
18
298
517
250
Options & AccessoriesTPC NC Controller p.66Chucks p.77Tailstock p.79Support Spindle p.79Face Plate p.81Encoder / Scale p.82Pull Stud Device p.83Rotary Joint p.83PVC or Steel Cables p.84
8513
5
8590
211
195285
370
70
220
154 159445
1555H7
40H8
4256
100h
7
100h
7
1487 155
110
16027
0
105115 200
315
261
95 164 1510445
1565H7
45H8
4666
120h
7
420
120h
71587 165
110
16027
0
105115 200
315
261
95 164 1510445
1565H7
45H8
4666
120h
7
420
RNE-250R ->
120h
7
1587 165
Ø46
20 100 69 1190
Ø50
Ø75H
7
Ø45H
8
153
98
135
93
8522
0
85
625
8
320423
227103
18155
272
275
160
115
727
829
2
177424
115 1257
141
96
9822
5
5 245250
320
18170345
210
380
354
18
384
617
Ø82
Ø85
Ø110
H7
25
Ø85H
8
202041
250
![Power Circuit Breakers - SACE Sales LIMITED 4/4 Description S3 S4 Isomax Electrical Specifications N H L N Performance level Iu [A] 160-250 160-250 160-250 160-250 Poles No. 3/4 3/4](https://static.fdocuments.net/doc/165x107/5a9f256d7f8b9a6c178c600d/pdfpower-circuit-breakers-sace-limited-44-description-s3-s4-isomax-electrical.jpg)
