MyResume2016 09.11.16

Copyright © 1996-2006, JobStreet.com. All rights reserved.

Mohd Badlishah bin Jamaludin

Contact Info

Address : No.46, Jalan Melati 3, Taman Melati, Benus, , Bentong, 28700 Pahang, Malaysia

Telephone No. : 60-09-2229372

Mobile No. : 0199327897

Email : [email protected] / [email protected]

Personal Particulars

Age : 41 years 10 month(s)

Date of Birth : 24 Jan 1975

Nationality : Malaysia

Gender : Male

Marital Status : Married

IC No. : 750124-06-5539

Permanent Residence : Malaysia

Educational Background

Bachelor's Degree

Field of Study : Engineering (Mechanical)

Major : Mechanical Engineering

Institute/University : University Technology of Malaysia, Malaysia

Grade : Grade C/2nd Class Lower

Graduation Date : Jul 1998

Primary/Secondary School/SPM/"O" Level

Field of Study : Science & Technology

Major : Science Stream

Institute/University : Sulaiman Secondary School, Malaysia

Grade : Grade B/2nd Class Upper

Graduation Date : Dec 1992

Knowledge & Skills

Knowledge :

Technical

Basic Setup for Fire Alarm System, Gas Suppression System & Telecommunication system including Air Horn, Auto Cad R12, Primavera, Microsoft Project, Microsoft Word, Excel and Power Point, Adobe Photoshop, Light room & In design , Lotus Notes, Spread Sheet, Basic Construction knowledge, Fluid & Thermodynamics, PDCA Cycle, Mistake Proofing, First Article Product, Quality Management System, ISO9001:2000, OSHA18000, ISO14000, TS16949, Water Treatment System (Emulsion System), E&I requirements in Oil and Gas, NFPA Standards, 7QCC Tools, Material Inspection System System,

Soft Skills

Coaching and Counselling, Project Management Skills, 5S + Safety Awareness, CPR and First Aiding Skills, Project Coordination, Team Building, Stress Managements, 7 habits and Self Manage Team

mailto:[email protected]


Employment History

SIEMENS MALAYSIA (SDN BHD)

Position Title : Site Project Manager

Position Level : Senior Executive

Specialization : Construction and Building Technology

Industry : Fire Alarm System, Telecom and Gas Suppression System

Duration : May 2015 – September 2016

Monthly Salary : RM 12000

Client : BASF and Petronas

Project Location : Gebeng, Kuantan

Project Contract : K009

Work Description

Job details at BASF Plant Lemongrass Project.

Managing multiple discipline contractors in the installation of Fire Alarm Systems, Gas Suppression, CCTV and Public Address including Access Door and Air Horn

1. Ensuring all items and devices are installed in accordance to the contractual agreement and Bill of Quantity

2. Supervising Site Team which consists of Engineers and Supervisor, QA QC Officer, ESH Officer, Planner and Supervisor, Turn Over Engineer including 26 Semi Skill workers at Site

3. Ensuring quality of work meets Oil and Gas Installation requirement under Electrical and Instrumentation Standards under BASF, Petronas and Fluor Corporation

4. All installation is in accordance to Schematic, Technical and Issued For Construction (IFC) drawings

5. All technical specifications including construction materials types, cables and devices are followed as per the contracts and any introduction of new items shall be upon the approval of the client before proceeding to purchasing and installation at site.

6. To monitor work progress physically to ensure Mechanical Completion Target Date can be achieved

7. To work closely with planner on progress monitoring via site inspection as well report to the client.

8. To coordinate with all Main Contractors in Contractors Coordination Meeting to ensure client requirements are met, minimizing work interference on site as well as addressing work hazards by working closely together.

9. To ensure all construction materials are readily available at site, ready for installation and coordinate with all contractors on materials status as well as construction issues at site.

10. Attend to weekly meeting with Clients and report Site Team Weekly Progress

11. Safety is Top Priority: Work closely with Safety Officer and Safety Supervisor to ensure workers safety are met and PPE equipped

12. Work closely with Safety Officer to ensure all Job Safety Analysis (JSA) have identified all hazards and risk while performing work especially when working at height (WAH) and confined spaces

13. To ensure Safe Work Practice on site via work execution, JSA and Safety Task Assignment during work on site

14. To work closely with Quality Engineers / Inspectors to ensure installation are top notch and following Oil and Gas Standards

15. To coordinate for storage, quality checks, permit issuance, transportation, lifting works either Crane or Sky lift, Boom lift or Scissor lift while working on site.

ELEKTRISOLA MALAYSIA (SDN BHD)

Position Title : Senior Engineer


Specialization : Manufacturing/Production Operations

Industry : Manufacturing / Production

Duration : Jan 2009 - Present


ELEKTRISOLA MALAYSIA (SDN BHD)

Position Title : Continuous Improvement Engineer cum Facilitator


Specialization : Manufacturing/Production Operations



Duration : Jan 2001 – December 2008


Work Description:

Job Details

1. To lead a team of facilitators and enamellers to achieve total customer satisfaction by adhering to customer requirements

2. Ensuring Best Work Practices while maintaining the highest standard of 6S

3. Train enameller or production operators to run assigned machine consenting on Safety and best product quality

4. To lead projects in reducing potential barriers to product quality envisioning team to company targets via projects

5. To research and standardize non standard methodology conforming to Total Quality Managements

6. Hands on knowledge of TS16949, ISO14000, QS9000, OSH1800 with Integrated Management System Enforcement for compliance and audit purpose

7. Involve in Quality Audit System as Junior Auditor in ensuring systems are intact and practiced for compliance audit, internal and external

8. 12 years experienced as specialist for Standards and Non Standard products run for copper magnet production with new enamel technologies

9. Hands on knowledge of 5 machine types of Enameling machine which are GEMINI, S45, KAT, VST, X-MC

10. Involved in Behavior Based Audit auditing on members safety at the work place at respective areas and the company premises in general

11. Key person in revising the Job Safety Analysis in Enamelling department in accordance to JEM-001

12. Leader in Competency Based Training Module from the 1st to the 4th Module focusing on Enamelling Department in General

13. Project Manager for Bare Wire Scrap Reduction

14. Key Person in Significant Impact Register Assessment in Enamelling Department

15. Environmental and Safety Advisor for Enameling Department

16. Key Person in Enameling Department under Safety Section

17. Monthly Training on Safety Issues and upon current issues and request by Enameling Management

18. Factory Assessment upon external audit mainly external focusing safety compliance such as FMA 1967 or OSHA 1994

Achievements

1. 2nd Best Improvement team in 2014 in Enameling Section

2. Best improvement team in 2013 among others in Enameling Section

3. Best Improvement Team in 2004 among 7 teams in Enameling Section

4. Achieve 1st place overall in Continuous Improvement Projects for S45 Team and 3rd for Gemini Team, both under care.

5. Reduce scrap as much as 2% from the Team Scrap Target which was set at 5%

6. Appointed Trainer for Self Manage Team in for Problem Solving and

7. Product Specialist encompassing new enamel technologies such AI210, AB15, S200 and G170

8. Key Trainer for Nepalese and Myanmar workers

9. Through Project Management increase scorecard achievement for Bare Wire Scrap throughout Enameling Department from 47% to 84% YTD

10. Reduce electrical cost by machine power consumption optimization monitoring

Reason for Plan to Leave

1. Career advancement

2. Job opportunity

3. Personal Target of becoming Manager before 40 years old

PREVIOUS WORKING EXPERIENCES


OMNI ELECTRONICS (SDN BHD)

Position Title : Senior Quality Engineer


Specialization : Engineering - Mechanical/Automotive

Industry : Electrical & Electronics

Duration : Jan 1999 - Dec 2000


Work Description:

a. Construct Quality Plan for Top Level (Finish Goods) to ensure product is at its most highest quality, meeting client and customer requirement, both visually and functionality

b. To liaise with parent company (Hewlett Packard Singapore), in any new product requirements

c. To conduct best work practices in work inspection relating to product flow

d. To construct maximum work flow with attention to line speed to Quality inspection capability

e. To assign each assistant quality engineers to individual product (altogether 4 assistant engineers) to meet TQM requirements.

f. To plant work in accordance to Gantt Chart in our goal to achieve On Time Delivery

JAMAL & SONS CLASSIC BIKE

Position Title : Junior Mechanic

Position Level : Non-Executive

Specialization : Customer Service

Industry : Automobile / Automotive Ancillary / Vehicle

Duration : Apr 1998 - Nov 1998


Work Description:

Job Details

1. To assist senior mechanic in repairing Classic Bike namely Norton, Triumph, BSA, AJS and others

2. To reconstruct and manufacture bikes as per customer 'special' requirement such the Triumph Trident project

3. To ensure all tools are in 5S + 1S conditions and properly managed

Achievements

1. Involve in project bikes teams such as the Norton 750 cc project

Reason for Leaving

1. Job offer from Omni Electronics (M) Sdn. Bhd

JAG ADVERTISING (SDN BHD)

Position Title : Salesman

Position Level : Fresh/Entry Level

Specialization : Customer Service

Industry : Retail / Merchandise

Duration : Jan 1998 - Mar 1998


Work Description:

Job Details

1. Selling products to customer based on client requirements such as Car Care product, Shakey's Pizza and others

Achievements

1. Became best seller in induction in the early stages of sales training

Reason for Leaving

1. Job Offer from Omni Electronics

ANTARA STEEL MILLS (SDN BHD)

Position Title : Assistant Engineer (Practical Training)

Position Level : Fresh/Entry Level

Specialization : Engineering - Mechanical/Automotive



Duration : Jul 1997 - Sep 1997


Work Description:

Duties:

1. To seek first hand practical Training on Heavy Industries involving Scrap metal Melting

2. To identify work flow between Full Metal Furnace, to Ladle Furnace and finish product before transference to Rebar Mill

Accomplishment:

1. Involve in Rebricking or Major PM to change Refractory Bricks inside the Full Metal Furnace

2. Construct Thesis in the Design of the Refractory Bricks to the Metal Furnace Construction work flow

Reason for leaving:

1. Finish Practical Training

Top Skills

(Proficiency: Advanced - Highly experienced; Intermediate - Familiar with all the basic functionalities; Beginner - Just started using or learning the skill)

Skill Years Proficiency

Training and Counselling >5 Advanced

Self Manage Team >5 Advanced

Project Management >5 Advanced

Languages

(Proficiency: 0=Poor - 10=Excellent)

Language Spoken Written

Bahasa Malaysia 10 10

English 10 10

Other Languages

English, Malay

Additional Info

CAREER OBJECTIVE

To Be A Successful Leader

EDUCATION

July 93 - October 98 : Universiti Teknologi Malaysia.

Bachelor Degree in Mechanical Engineering

(Production)

January 91 - December 92 : Sekolah Menengah Sulaiman, Bentong, Pahang

SPM - Grade One

January 88 - December 90 : Sekolah Menengah Ketari, Bentong, Pahang

SRP - Grade A

WORKING EXPERIENCE

July - September 1997 : Received industrial training at Antara Steel Mill Sdn. Bhd.

Pasir Gudang, Johor Bharu Berhad,

April - Jun and Nov 96 : Received practical training in University Teknologi


Malaysia (have completed 12 module in 12 weeks)

COMPUTER SKILL : Windows, AutoCad, CAD/CAM (Unigraphic), CNC (programming

For milling, turning, wire cut) and Microsoft Office, in house Elektrisola softwares such as EPRS, EFIS, MDE, PC-Master, EMMS and others.

INTEREST : Tracking, Biking, Sports, Reading and Computer, Reading

And Drawing

EXTRACURRICULAR ACTIVITIES

School

1. Secretary of The Badminton Club

2. A Member of The Volley Ball Club

3. A Member of The Table Tennis Club

4. A Member of Kelab Bahasa Malaysia

5. House Committee members

6. A member of Bahasa Melayu Club

7. A member of the English Club

UTM

1. Block Leader of G17 Kampung Meranti, Universiti teknologi Malaysia

2. Vice president of Society of Manufacturing Engineer student chapter S227

3. Project secretary of Technoweek 96'

4. A member of Mechanical Engineering Student Union (PETERA)

REFERENCES:

1. Dr. Esah Hamzah, 2. P.M Noordin Mohd Yusof

Project Supervisor (Lecturer), Academic Advisor (Lecturer),

Fakulti Kejuruteraan Mekanikal, Fakulti Kejuruteraan Mekanikal,

Universiti Teknologi Malaysia, Universiti Teknologi Malaysia

Karung Berkunci 791, 80990 Johor Bahru, Johor.

80990 Johor Bahru, Johor. Tel: 07-5504680

Tel : 07-5504746

Availability : After 1 Months Notice

Miscellaneous

Expected Monthly Salary : RM (Negotiable)

Willing to Travel : High(80%-90%)

Willing to Relocate : Will Consider

Possess Own Transport : Yes

Personal Strengths:

Trustworthiness, Loyal, Attention to Detail, Close Project Management, Self-Manage Team, Multitasking, Coaching, Training and Counseling, Patient and Calculative, Attention to details, FMEA, Behavioral Based Study Monitoring, Statistical Analysis and Control, Leading by example, EPC & EPCC experience, Site Coordination, Problem Solver,

References

Mrs Jennifer Kim

Relationship : Project Client

Position : Fluor Project Director

Tel : 017-8787354

Mr Jegathisan

Relationship : Superior

Position : Siemens Project Manager

Tel : 0123718195


Mr. Neranjan


Position : Siemens Country Manager

Tel : 0122765155

Mr. Andrew


Position : Spectrum Technical Advisor

Tel : 0192183046

Mr. Saiful Adli

Relationship : Working colleague

Position : Head of Department for Ultrafine Wire

Tel : 09-2215267

Mr. Sharuddin Sahak

Relationship : Technical Advisor cum Mentor

Position : Head of Department for Large and Fine Wire, Elektrisola (M) Sdn. Bhd

Tel : 09-2215256

Mr.D. Thurairajah

Relationship : Technical Specialist for VST and KAT Machine

Position : Supervisor for Large and Fine Wire

Tel : 09-2215250

ELEKTFIIScILAt193121-Pl

lMalaysia.I Sdn. Elhd.

02 lanuary 2015

Saiful Adli Bin Mat Jusoh @ Mohd YusufHead of Division, Enamelling DepartmentExt:267

To whom it may concernRecommendation for Mohd Badlishah bin Jamaludin (E0416)

Mr Badlishah whom have served Enamelling Department for 14 years and myself personally for 10years have portrayed great leadership, multi tasking skill and above all a good communicator andtrainer.

He has proven to be a very competent person with excellent project planning. He is able to graspnew and complex issues quickly and independently. He is a committed, focused and analyticalperson. His fluent knowledge of the English language and his broad knowledge of various softwareprograms and IT concepts contributed to the success ofhis projects.

Mr Badlishah took on adjusting to a new and different culture as a challenge. He showed keeninterest in the various multi-national cultures and was respectful to each of their differences. Whenworking with his colleagues, he was very flexible, cooperative and sensitive. He displayed positiveteamwork and was especially helpful in transferring his knowledge to our employees. He provedcomprehensive leadership skills and put decisions into action.

Mr Badlishah has portrayed himself as a very reliable, friendly and loyal person. I am convinced thathe will easily adapt and acquaint himself to new tasks and work with the same commitment as he didduring his tenure for ELEKTRISOLA MALAYSIA. A true believer in doing thing, he managed toovercome many difficulties involving various departments. I personally recommend him to anyorganization as he has qualities that are important and beneficial towards lhe organization success.

I thank Mr Badlishah for his cooperation and wish him all the best for his future life and career.

A true asset, he will be deeply missed.

Best regards,

*{<******rr * * * ** * ** * ** *x * * rr* {< {<* * *

Mat Mohd YusufHead of Division,Phone (MAL): +60.9.2215 267H/P (MAL): +60.12.26 97 208Offi ceMail : saiful. adli@elek1risola. com.myHomeMail: sadlimyusof@yahoo. com

ELEKTFIIEicILAIMalayelal Eldn. t1s3121-PlEthd.

I

February 05,2015

P. SelvamAsst. Drawing Manager,Drawing departmentElektrisola (M) Sdn Bhd.

To who it may concern:

Re: Commendation - Mohd Badlishah Jamaludin

The purpose of this letter is to formally commend Mohd Badlishah Jamaludin who works with us for a very longtime with best coordination as my internal customer within Elektrisola factory.

Mohd Badlishah Jamaludin with his excellent coordination and cooperation resulted in number of improvementideas and activities to improve productivity and reduce internal rejects.He works with few projects and brings all of us to discuss to solve operational problems. He could workindependently and also a team player.

I was so impressed by the support from him as working colleague in his diplomatic approach on daily operationalissues.

His motivation and maturity will bring more success in his carrier.

Asst. Drawing Manager,Drawing Department,Elektrisola (M) Sdn,. Bhd.

E[-El(TFllElClLA lMalsysial Sdn, Hhd,Jdqrn Odrnsi g6Err.. JirndE B8rt.

E€ 7tsO Fenrong, Pehe*g, l\,lalE\Eia.Tal : r5O-1O19 eET0 8BB

ELEI(TFIIS:3LAI]vtataysial sldn. Elhd

1199121-Pl

I5-Ian2015Thinagaran G. Jothi RamalingamMaintenance & ESHS Manager09-2215230

To whom it may concern,Re: Recommendation for Mohd Badlishah Bin Jamaludin (E0416)

Mr. Badlishah has served Enamelling Department for the last 14 years, during which I have

worked with him directly and indirectly through my maintenance team over the last 13 years.

During this time, he has portrayed good communication skills and is resourceful in executingcross department improvement and cost saving projects that benefited both his department and

the Maintenance department. He is also approachable and has sustained a good workingrelationship between him and Maintenance Department over the years. His knowledge and

experience will be beneficial to any organrzation.

With this, I personally recommend him to arty organization. Feel free to contact me if anyclarification is needed.

Sincerely,

Thin G. Jothi RamalingamMaintenance & ESHS ManagerElektrisola (M) Sdn Bhd

-"*-- ^6lfr.CfrlFffir9 H'{G'K*?

ELEI{TFI IEIE}I^& IMaltytJe{$n grn!&i gc

8El750 Eentorq, &fEl :+SI-reffi]

MyResume2016 09.11.16

Documents

Transcript of MyResume2016 09.11.16