Industrial Solutions for the aggregates and mining industry

Mobile jaw crushing plant

Features

Jaw crusher EB 11-08 · Optimized crushing chamber resulting in reduced wear and long operating life

· Hydraulically assisted gap setting · Crushing jaws of manganese-alloyed steel, turnable (upside down), exchangeable

Frequency controlled grizzly feeder with exchangeable nominal gap · Wire cloth screening element beneath the grizzly to remove natural fines

2 way crusher by-pass chute arranged below the vibrating feeder’s grizzly section for forwarding the pre-screened material via manual deflecting flap optionally to:

· Crusher discharge conveyor · Separate optional stockpiling conveyor · Crusher discharge conveyor (intermediate material) and separate optional stockpiling conveyor (fine material)

Feed hopper with foldable extensions

All feed, discharge and connection chutes made of steel plate with liner

User friendly maintenance

Proper safety protection

Operator platforms with access ladder, walkways and handrails · Compact design and easy access to all equipment

Chassis with triple-axle bogie, air brakes, tail and side lights · Easy and quick displacement between the job sites

Complete electrical plant

Free-standing control panel cabinet with separate switchgear panel and connecting cabling

· Plug and play

Proven quality – great flexibility – easy operation

The mobile single-toggle jaw crushing plant with all necessary mechanical and electrical components, support structure and protection devices combines high flexibility with great efficiency in primary crushing. The plant concept allows a great variety of feed materials and a combination with further crushing or screening units to produce optimally „sized“ output for further processing. Set-up is easy, followed by a quick start-up.

Multiroad Jaw EB 11-08

Industrial Solutions for the aggregates and mining industry

Technical Specification

© 2016 Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustration purposes only. The operation values are considered to be approximate and will be finally determined on the basis of the specific task and the material characteristics. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and thyssenkrupp makes no other warranty of accuracy, reliability, completeness, merchantability or fitness for any purpose, express or implied. Products and services listed may be trademarks, service marks or trade-names of thyssenkrupp and/or its subsidiaries in Germany and other countries. All rights are reserved.

Sales representative

ContactRT

/MIN

-CRT

-SM

/JA

W E

B 1

1-08

/Indi

a/e2

Multiroad Jaw EB 11-08

General Data

Materials: Granite, Iron Ore, Hard Rock etc.

Feed material size: 0 – 600 mm edge length

Plant capacity: max. 350 t/h

Total installed motor power: 135 kW

Working dimensions (l x w x h): 15,030 mm x 4,300 mm x 5,240 mm

Transport dimensions (l x w x h): 15,030 mm x 3,030 mm x 4,310 mm

Transport weight: 57 mt

Standard voltage supply: 400 V ±10% / 50 Hz / 3-phase AC

Feed hopper

Volume: approx. 15 m³

Vibrating feeder

Dimensions (w x l):1,200 mm x 4,200 mm with integrated two-deck grizzly section

Motor power: 2x 6.6 kW

Crusher

Jaw crusher: Type EB 11-08

Feed opening: 1,100 mm x 800 mm (nominal)

Setting range: 70 – 225 mm

Motor power: 110 kW

Discharge belt conveyor

Dimensions (w x l): 1,000 mm x 8,100 mm

Motor power: 11 kW

thyssenkrupp Industries India Pvt. Ltd.

Pimpri, Pune 411 018 India

Phone: +91 20 2742 5461-64 Fax: +91 20 2742 5350

Corporate Identity No.: U74999MH1947PTC005508

G

Working modeSide view

Transport mode

Hei

ght (

h)

Hei

ght (

h)W

idth

(w)

Length (l)

Top view

Side view

Length (l)