Modelithics Barry Industries MVP Library › FreeDownloads › ...Keysight Technologies’ Genesys,...
Transcript of Modelithics Barry Industries MVP Library › FreeDownloads › ...Keysight Technologies’ Genesys,...
-
World’s Best RF & MicrowaveSimulation Models Modelithics® Barry Industries MVP Library
for High Accuracy Electronic Simulation
Excellence in Modeling Since 2001 ©Modelithics, Inc. 07/2019
LIBRARY FEATURES
OVERVIEWVendor Partner
The Modelithics® Barry Industries MVP Library offers a collection of Microwave Global Models™ and/or 3D models that provide many advantages over ideal and S-parameter file-based models. Valuable features of the models include:
• MEASUREMENT-BASED — Each global model is developed using highly accurate measurements across multiple conditions including different substrates and pad dimensions. By developing models using measurements, designers can have confidence that their simulations will represent real-world conditions.
• SCALABLE — The models can be scaled for part value (when applicable), pad dimensions, and substrate properties, allowing designers to simulate based on their specific conditions.
• OPTIMIZATION AND STATISTICAL ANALYSIS — Model parameters can be tuned and optimized in certain EDA software tools to provide best case parameter selection and rapid achievement of design goals. Model parameters can also be set up for statistical analysis.
• AVAILABLE FOR POPULAR EDA TOOLS — Keysight Technologies’ Advanced Design System (ADS), NI AWR Design Environment/Microwave Office™, Keysight Technologies’ Genesys, ANSYS® HFSS™, Sonnet®, and Cadence.
• COMPLETE DOCUMENTATION — Each model contains a comprehensive model datasheet that lists recommended model validity parameters, measurement and test fixture details, and model-to-measurement data comparisons.
Modelithics model for Barry RE1005CT resistor series on 4mil Rogers 4350B (H/Er=1)
S11 (left), S21 (right)Legend: 50 Ohms, 75 Ohms, 100 Ohms
Solid lines - Models, Symbols - Measured data.H=subtrate thickness in mils, Er=substrate dielectric constant.
The Modelithics Barry Industries MVP Library is a collection of highly accurate measurement-based simulation models that are compatible with popular Electronic Design Automation (EDA) software tools. These models offer accurate broadband prediction including parasitic effects and feature scalable design parameters such as component value, pad dimensions, and substrate properties. These state-of-the-art models install seamlessly into the EDA software, placing high accuracy models at your fingertips, and allowing for first pass design success!
Modelithics model for Barry RE1005CT resistor series.
S11 S21
Legend: 50ohm model and measured data on 3 different board types:
4mil Rogers 4350B, 16mil Rogers 4003C, 60mil Rogers 4003C.
Line = model, Symbols = measurement
QFN-5532-05025 mm package
-
Excellence in Modeling Since 2001 ©Modelithics, Inc. 07/2019
List of Components in the Modelithics® Barry MVP Library
Visit the Barry MVP Page on the Modelithics website to:• Explore the current list of available Barry component models• View model datasheets• Browse literature collection for application notes, presentations, etc.• Request a FREE* 90 day trial of the Modelithics Barry model library: www.Modelithics.com/MVP/Barry *with approval
Advanced Model Features for More Accurate High Frequency Design
RE0805CT RE1005CT AK0405CB AT0904CBREC1206CT RK0603ZZRY0805CT RY1005CTRYC1206CT RZC1206CT(1-port)
RZC1206CT(2-port)**Visit our website for an updated complete list, and see our available
Resistors Attenuators
PackagesQFN5532-050x*
E-Field Visualization3D Model Image
Pre-Release models (www.modelithics.com/mvp/Barry)*3D version also available for ANSYS HFSS
An encrypted full-wave 3D EM geometry model is available for use in ANSYS HFSSTM for the Barry Industries P/N QFN-5532-0521 molded 5mm Quad Flat No lead (QFN) surface mount package with grounded seal ring (additional information is available at www.barryind.com). The model is for use in 3D simulations with microstrip applications and validated with measured multi-substrate S-Parameters. (www.Modelithics.com/model/models3D)
3D EM Package Model
Part Value Scaling
Modelithics Microwave GlobalModels™ have all values within a part series within one model. This allows for tuning and optimization by part value and eliminates the need to manually substitute individual models during a design sequence.
Substrate Scaling
Red=6.6 mil Blue=30 mil
Green=60 mil
S11 for 1.5pF capacitor. Symbols=measurement, Line=model
Variations in substrate properties have a significant effect on the response of surface mount components in high frequency designs. Modelithics models are substrate scalable and validated over a continuous range of substrate properties based on board thickness and dielectric constant.
Pad Size Scaling
Modelithics models (in default mode) include the PCB pad with reference planes at the outer edges of the pads. The pad scaling feature lets designers adjust the dimensions to match their design, which is important for achiev-ing maximum simulation-to-measure-ment agreement.
Datasheets
Each Modelithics model has adata-sheet that provides detailedinformation about the model, such as the validation frequencies, reference planes, part value / pad scalability / substrate scalability ranges, model performance, and details about other features and model parameters.