Model 40P Can Seaming & Manufacturing Machine 40p.pdf · Key Features Intuitive software Low shear...
-
Upload
phungxuyen -
Category
Documents
-
view
281 -
download
2
Transcript of Model 40P Can Seaming & Manufacturing Machine 40p.pdf · Key Features Intuitive software Low shear...
Standard Features ■ Free-Standing Stainless Steel Machine Enclo-
sure with Door Interlocks ■ Grease Lubrication ■ PLC & Touch Screen Control ■ Variable Speed Motor Drive ■ Electric Brake ■ Disk Feed Infeed ■ Tool Kit & Instruction Manual
■ Rated Speed up to 275 CPM ■ Easy Maintenance and Operation ■ One set of Can and End Change Parts ■ No Can/No Cover Feed ■ Second operation off-seam setting ■ Reciprocating Cover Separator Knife ■ Revolving 4-head Rotary Seaming Turret ■ Head Spin Machine ■ Wide Range of Accessories and Attachments
Model 40PCan Seaming & Manufacturing Machine
4485 Allen Rd | Stow, oH 44224 USA | +1 (330) 923-0491 www.pneUmAticScAleAngelUS.com | [email protected]
Can Seaming & Manufacturing MachineModel 40P
USA * AUSTRALIA * BELGIUM * CANADA * HONG KONG * UNITED KINDOM
English Metric
No. of Seaming Sta-tions 4 4
Output Speed Range 20-275 CPM 20-275 CPM
Min./Max. Can Diam-eter 202-404 54.0-108.0 mm
Min./Max. Can Diam-eter 108-404 38.1-108.0 mm
Min./Max. Can Height 108-700 38.1-177.8 mmMSLF (Optional) 108-812 38.1-222.3 mmMSLF (SV & UCG) 111-700 42.9-177.8 mm
DF (Optional) 108-1000 38.1-254.0 mm
DF (SV & UCG) 111-700 42.9-177.8 mmTransfer Chain Pitch Centers (MSLF) 6.00" 152.4 mm
Transfer Chain Pitch Centers (DF) Random Random
Horsepower/Electrical 5 hp 4 kWElectrical Controls 24 VDC 24 VDC
CO²/Nitrogen Gas 100 psi @ 70F 6.9 bar @ 21C
Steam Supply 330 psi @ 85F 5.9 bar @ 165C
Net Weight MSLF (Approx.)
5,900 lbs 2,676 kg
Gross Weight Domes-tic MSLF (Approx.)
6,900 lbs 3,130 kg
Gross Weight Export MSLF (Approx.)
7,300 lbs 3,311 kg
Net Weight DF (Ap-prox.)
5,700 lbs 2,586 kg
Gross Weight Domes-tic DF (Approx.)
6,700 lbs 3,039 kg
Gross Weight Export DF (Approx.)
7,100 lbs
3,221 kg
Optional Features
■ Under Cover Gassing ■ Steam Vacuum ■ Single Roll Cover Separator ■ Titanium Nitride coated Angelloy® Seaming rolls
with Ceramic Bearings ■ Titanium Nitride coated Angelloy® Seaming
Chucks ■ Toppers or Packers ■ Can Manufacturing ■ Rotary Embossing Type Cover Marker ■ Cover Feed Chute with Vibrator ■ Filler Connecting Parts ■ Random Worm Infeed ■ Magnetic Downstacker Chute with Vibrator
Technical Specifications
Key Features ■ Intuitive software ■ Low shear processing ■ Minimal reduction in viability of recovered cells ■ State-of-the-art manufacturing facility in
Clearwater, Fla., USA
■ Single-use disposable module ■ No CIP or SIP necessary ■ Fully automated ■ High cell recovery rates ■ Mammalian and insect cell processing ■ Integrated cart
Carr® UniFuge® PilotCarr Centritech Separation Systems
Caption
4485 Allen Rd | Stow, oH 44224 USA | +1 (330) 923-0491 www.pneUmAticScAleAngelUS.com | [email protected]
Carr® UniFuge® Pilot Carr Centritech Separation Systems
For more information, please contact your Carr Centritech representative at:
5320 140th Avenue NorthClearwater, FL 33760 USA
(727) 535-4100or
Otto-Hahn-Strasse 54D-63303 Dreieich-Sprendlingen
Germany(+49) 6103 38090
Carr Centritech’s new UniFuge® from PneumaticScaleAngelus utilizes a gamma irradiated, single-use module that requires NO CIP and NO SIP. All process contact surfaces are easy to install and are 100% replaceable after each run. Low shear harvesting of mammalian and insect cells is possible, and minimal reduction in viability of recovered cells is achievable. Since the cells are not lysed, production of cell debris in the centrifuge is minimized, making the UniFuge® an excellent choice for both cell recovery or centrate clarification. UniFuge® modules are readily tube welded to your single-use bioreactor connections. (Customer-specified single-use connectors available upon request.)
The UniFuge® is completely automated with flexible cycle parameter entry. The feed suspension is gently pumped to the module and the cells settle to the outer radius while the clear supernatant is continuously discharged. Once the module has filled with cells, the controller stops the rotor and discharges the cells. This cycle is repeated until the bioreactor volume has been processed.
Machine Specifications ■ Utility Requirements
Power Configurations: US 120 VAC 15A EU 230 VAC 50 Hz 10A
■ Construction Process Wetted Parts: USP Class VI Polycarbonate USP Class VI Polyurethane USP Class VI Silicone USP Class VI Bioprene USP Class VI C-Flex USP Class VI Polypropylene Terminally Gamma Irradiated
■ Dimensions Cart: 53” L X 32” W X 46” H (35cm L X 81cm W X 117cm H) Centrifuge: 33.5” L X 19” W X 35” H (__cm L X __cm W X __cm H) Weight: 640 lbs (291kg) Total
■ Operating Specifications Feed Flow Range: 0.1–4 liters per min. Bowl Capacity: 1.6 liters
Key Features ■ Our goal is to assist our customers in increasing
productivity, reliability and profitability. This will be accomplished through newly developed and comprehensive preventative maintenance, audit and training programs.
■ The Seamer Technical Services (STS) Group was formed to provide customers with extended technical services and support beyond the initial startup and installation of the can seamer.
Seamer Technical Services (STS)
4485 Allen Rd | Stow, oH 44224 USA | +1 (330) 923-0491 www.pneUmAticScAleAngelUS.com | [email protected]
Seamer Technical Services (STS)
Tiered Services (PM Programs)The STS Group offers a variety of tiered services depending on your individual needs, and encompasses all aspects of your seaming process:
■ LEVEL 1: Annual comprehensive audits that include recommended corrective action ■ LEVEL 2: Semi-annual abbreviated audits with focus on critical areas ■ LEVEL 3: Quarterly tune-up visit with focus on normal machine wear and seam quality ■ LEVEL 4: 4 to 6 week routine visit that targets seam analysis and corrective adjustments
The listed service levels can be utilized alone or coupled together, allowing it to be structured to your facilities’ specific needs or budget.
Rebuild Exchange ProgramWe now offer a Rebuild Exchange Program for your seamer subassemblies, includ-ing seaming spindles, upper and lower lifters, and filler drive gearboxes, if equipped.What are the advantages of our Rebuild Exchange Program?
■ New or reworked spindles, lifters and filler drives assembled and ready for installation ■ Assistance of PneumaticScaleAngelus certified service technicians ■ Greatly reduced downtime and higher quality rebuilds utilizing OEM standards ■ All-inclusive subassemblies with hardware and parts common to job being performed ■ Full credit for new and unused parts
Field Service Kits We can also provide service kits that include all necessary new parts required for the rebuild of subassemblies in your facility. Each kit is shipped in a self-contained job box for your convenience, and any new, unused parts can be returned for full credit.
Tooling Preventative Maintenance ProgramDesigned for the replacement of seaming chucks and seaming rolls at a predeter-mined time or can count interval. This service ensures critical tooling setups are confirmed for the best possible life of these components.
Maintenance TrainingCritical seamer maintenance training performed onsite for your maintenance tech-nicians. This training is paramount in assuring a comprehensive understanding of the seamer and critical operation and components related to finished product.
Seam Defect AnalysisUsing state-of-the-art seam measurement and monitoring equipment, we can pro-vide unbiased analysis of seam integrity issues that your facility may be experi-encing. Analysis report will consist of digital photos, measurements of critical dimensions, and root cause determination, if possible.
Seam Technology TrainingOutlines the complexity behind seam formation. This class highlights the importance of proper setup, adjustments, quality checks and troubleshooting, and provides a terrific connection of your quality and maintenance departments.
Seamer TrainingThese classes focus on maintenance and operation, including some electrical high-lights. Advanced teardown classes are also available for maintenance technicians.
For more information, please e-mail [email protected] or call:
Akron, OH ● (330) 923-0491Los Angeles, CA ● (323) 583-2171Droitwich, U.K. ● +44 (0) 1905 779602Antwerp, Belgium ● +32 (0) 3 327 31 40