WATER RESOURCES

4 www.dhigroup.com

MIKE 11 ModulesThe computational core of MIKE 11 is the fast, efficient and robust hydrodynamic simulation engine. This is complemented by a wide range of additional modules and extensions covering almost all conceivable aspects of river modelling.HD - HydrodynamicsThe hydrodynamic engine is available in four different sizes (75, 250, 450 and unlimited nodes). Each size of MIKE 11includes:

fully dynamic solution to the complete nonlinear St. Venant equations for open-channel flow

choice of diffusive and kinematic wave approximations in selected branches

options for Muskingum and Muskingum-Cunge methods for simplified channel routing in selected branches

automatic adaptation to subcritical and supercritical flow

Standard hydraulic structures such as weirs, culverts, bridges, pumps, energy loss and tabulated structures.

RR - Rainfall-RunoffIncludes the unit hydrograph method, a lumped conceptual continuous hydrological model and a monthly soil moisture accounting model. Allows any model combination in the network. Includes auto-calibration tool. SO - Structure OperationSimulates operational structures suchas sluices, overflow and radial gates as well as pumps and reservoir releases with user-defined operating strategies.DB- Dam Break Provides complete facilities for fast and convenient definition of dam geometry, breach development in time and space as well as failure mode. Includes DAMBRK / FLDWAV compatibility switch.

MIKE 11 is the industry standard for simulating flow, water quality and sediment transport in estuaries, rivers, irrigation canals and other surface water bodies in many regions. The reason is simple. It provides a wealth of capabilities that span the entire range of applications - from basic routing to complex, fully dynamic modelling. Yet it remains user friendly and efficient.

MIKE 11 in brief

Proven - used in hundreds of applications around the world. The de facto standard in many countries. Approved by numerous governmentalorganisations and bodies

Extendable - modules available for virtually any type of river modelling youcan envisage

Efficient - most computational modules include features for auto-calibration, sensitivity analysis and uncertainty assessment

Affordable - fully configurable modular structure allows you to choose the package that best suits your project budget and simulation requirements

User-friendly - a logical structure and workflow, flexible data input and manipulation features, and familiar graphical tools makes it easy to learn, easy to use, easy to achieve results quickly and easy to upgrade from HEC-RAS models

Persuasive - an impressive selection of data interpretation and visualisation tools makes it easy to generate convincing presentations for public dissemination of information.

River Modelling Unlimited

Presentation of results usingMIKE View.

Flood analysis and alleviation designReal-time flood forecastingDam break analysisOptimisation of reservoir and canal gate / structure operationsEcological and water quality assessments in rivers andwetlandsSediment transport and river morphology studiesSalinity intrusion in rivers and estuaries

Flood mapping with MIKE 11 GIS.

MIKE 11

Application Areas

WATER RESOURCES

AUTOCAL- Automatic CalibrationAllows automisation of the calibration process for a wide range of parameters, including RR parameters, Manning number, head loss coefficients, WQ parameters, etc. See Autocal description on page 33AD - Advection-Dispersion Transport and spreading of conservative pollutants and constituents with linear decay (including heat).

ST / GST - Non-Cohesive SedimentTransport, erosion and deposition of non-cohesive and graded noncohesive sediments, including simulations of river morphology.ACS - Cohesive Sediment3-layer bed description, which includes quasi-2D erosion.

ECO Lab - Ecological ModellingA numerical laboratory for ecological and water quality modelling.MIKE 12 / MIKE 11 StratifiedModelling vertical density differences,such as salinity or temperature in two-layer or multilayered stratified water bodies.HDQSS / ADQSS - Quasi-Steady State HD and AD modules simulating quasi-steady state scenarios.FF/ FW - Flood Forecasting Simulation package and GIS front-end for setting up operational flood forecasting systems. Includes real-time updating and Kalman filtering.LoadEstimation of nonpoint pollutant load from, for instance, agricultural activity.GISEnables extraction of cross-section data from DEMs, and combines DEMs and 1D simulations into 2D flood maps and animations.View FMProvides visualisation tools for output from MIKE 11.

MIKE 11 links seamlessly with other packages:MIKE 21 - for combined 1D-2D flood modelling (see MIKE FLOOD)MIKE SHE - for integrated surface wa-ter and groundwater modellingFEFLOW - for subsurface flow and mass transportMOUSE - for integrated urban catchment modelling

- for GIS-based automated hydrology and hydraulicsVisual MODFLOW - for 3D groundwater flow and contaminant transport modelling

MIKE 11 Integration

Examples of MIKE 11 river network configurations. Ask about other modules and packages

University discounts availableMulticopy discounts availableThe above prices are for stand-alone

licences. Network licences are available.

995

5,995

9,995

2,395

2,395

4,500

MIKE 11 HD75

MIKE 11 StudioHD250 + SO

MIKE 11 ProfessionalHD450 + SO + RR

MIKE 11 AD

MIKE 11 ST

MIKE 11 ECOLab

Pricing

MIKE 11 supports metric and US units

Language Versions

2D flood map output.

5

Simulation of water level with confidence intervals.

MIKE 11 user interface.

www.dhigroup.com

Visualised with MIKE Animator.

WATER RESOURCES / URBAN

6

MIKE FLOOD is an integrated flood modelling package for rivers (MIKE 11), surface flow (MIKE 21) and urban drainage (MIKE URBAN). It dynamically couples well proven 1D and 2D modelling techniques into one single powerful tool. This package offers a user-friendly approach to modelling inundation caused by the overtopping of river embankments or overloaded stormwater systems.

MIKE FLOOD Model All Types of Flooding in 1D and 2D

River/flood plain interactionDetailed dam break studiesIntegrated urban drainage and river modellingUrban flood analysis

Application Areas

MIKE FLOOD in brief

Advanced unmatched capabilities for detailed flood modelling

Efficient prepare your first model in hours, based on DEM data or existing models

Accepted by US Federal Emergency Management Agency (FEMA) for use in the National Flood Insurance program (NFIP)

Compatible reuse existing MIKE 11, MIKE URBAN and MIKE 21 models directly

Supported comes with a 12-month free hotline support and free updates

MIKE FLOOD builds on your existing knowledge and dataWith MIKE FLOOD you can leverage your investment in MIKE 11 river models or MIKE URBAN collection system models and expand your capabilities to more detailed 2D modelling of flood plains and urban areas. You can rapidly establish 2D flood models from digital elevation data and subsequently refine your model by adding hydraulic structures from the unique arsenal of MIKE 11.

Detailed flood modelling in streets.

www.dhigroup.com

Visualised in World Wind.

7

Simulation of the flooding following a dam breach.

Language VersionsMIKE FLOOD highlights

Smooth and robust coupling of 1D and 2D hydrodynamic models

Flood inundation maps

Comprehensive GIS integration

Animations as part of the result presentation

Efficient and stable modelling of the change from dry to flooded areas

Extensive capabilities for stormwater and combined sewer systems

Comprehensive structure package

Dam and embankment failure tools

Extensive toolbox for time series analysis

Automated linkage routines

WATER RESOURCES / URBAN

www.dhigroup.com 7

Ask about upgrade prices from MIKE 11, MIKE URBAN or MIKE 21

University discounts availableMulticopy discounts availableThe above prices are for stand-alone

licences. Network licences are available.

MIKE FLOOD ELPMIKE 11 HD75MIKE 21 HD/PP 25,000

MIKE FLOOD StudioMIKE 11 HD250 +MIKE 21 HD/PP 80,000

MIKE FLOOD Professional MIKE 11 HD450 +MIKE 21 HD/PP 80,000Other options available

MIKE FLOOD Urban ELPMU Entry incl CS Pipeflowand CS-RR

MIKE FLOOD Urban StudioMU Village incl CS Pipeflowand CS-RR

MIKE FLOOD Urban ProfessionalMU Town incl CS Pipeflowand CS-RR

4,300

14,995

18,995

4,300

14,995

18,995

Pricing

MIKE 21 is a professional engineering software package for the simulation of flows, waves, sediments and ecology in rivers, lakes, estuaries, bays, coastal areas and seas. MIKE 21 provides a complete and effective design environment for engineering, coastal management and planning applications. The combination of an advanced GUI and efficient computational engines has made it an irreplaceable tool for professional coastal and harbor engineers around the world. MIKE 21 is also used for environmental applications together with ECO Lab. Thousands of engineers and scientists rely on MIKE 21 as their key modelling tool.

Simulation EnginesThe MIKE 21 system comprises the following simulation engines:

Single Grid - the classic rectilinear model is easy to set up, easy I/Oexchange, straight-forwardnavigation in model andpresentation

Multiple Grids - dynamicallynested rectilinear model with theability to tailor grid resolution in areas of interest

Flexible Mesh - maximum flexibility for tailoring grid resolution within the model

The Flexible Mesh (FM) version comes with the 3-in-1 package, including the Multiple Grids and Single Grid engines. Attractive Entry Level Packages (ELPs)are available for all simulation engines in sizes ranging from 5,000 to 50,000 water points.

MIKE 21 ModulesMIKE 21 consists of the following modules:PP - Pre- and Post-ProcessingThe PP module offers an integrated work environment providing convenient and compatible routines to ease the tasks of data input, analysis and presentation of simulation results. HD - Hydrodynamics The HD module simulates the waterlevel variations and flows in responseto a variety of forcing functions. It includes a wide range of hydraulicphenomena and can be used for any 2D free-surface flow in which stratification can be assumed vertically well-mixed. AD - Advection-DispersionSimulates the transport, dispersionand decay of dissolved or suspended substances. Typically used in cooling water and sewage outfall studies.

MIKE 21 in briefTrouble-free - advancedsoftware tool with GUI facilitiesfor easy applications

Efficient - fast and reliablesimulation engines, which ensure high productivity a trueworkhorse

Handy - support software for data handling, analysis and presentation

Extensive - includes modules for virtually any kind of coastal and offshore modelling needs

Compatible - GIS integration and tools for processing model data in third party products like MatLab

Flexible - the range of computational grids, modulesand licence options ensures model selection customized to your needs and purpose

Accepted - well-proven technology with 30 years of track record and widely used on all continents.

Design data assessment for coastal and offshore structuresOptimisation of port layout and coastal protection measuresCooling water, desalination and recirculation analysis Environmental impact assessment of marine infrastructuresWater forecast for safe marine operations and navigationCoastal flooding and storm surge warningsInland flooding and overland flow modelling

Typical Application Areas

2D Modelling of Coastal Waters and Seas

Single grid.

MIKE 21

20

MARINE

1

www.dhigroup.com

MARINE

ST - Sediment TransportAdvanced sand transport model withseveral formulations for current and current/wave generated transport. Used for morphological optimisation of port layouts, impact of shore protection,stability of tidal inlets, etc. 3D description of sediment transport rates is included in the Flexible Mesh version, but available as add-on module in Single and Multiple Grids.MT - Mud TransportA combined multi-fraction and multi-layer model that describes erosion, transport and deposition of mud (cohesivesediment) or sand/mud mixtures.CAMS - Coastal MorphologyA powerful, integrated system that combines the wave, flow and sediment transport models into a fully dynamic morphological model. PA - ParticleSimulates transport and fate of dissolved and suspended substances. Used for risk analysis, accidental spillage, monitoring of dredging works, etc.SA - Spill AnalysisSimulates the spreading and weathering of suspended substances and is used for only forecasting oil spill, evaluating spill scenarios for contingency plans, etc.

ECO Lab - Ecological ModellingRead about this module on page 18.SW - Spectral Wave Model A 3rd generation spectral wind-wave model that simulates the growth,decay and transformation of windgenerated waves and swell in offshore and coastal areas.NSW - Near Shore SpectralWind-Wave ModelThe model describes propagation, growth and decay of short period and short crested waves in near shore areas.

PMS - Parabolic Mild Slope Wave Model

A linear refraction-diffraction model used to study wave disturbance in open coastal areas. Also (with some limitations) for computing wave fieldsin coastal areas with structures. EMS - Elliptic Mild Slope Wave

ModelEfficient model used to study wave dynamics in coastal areas and, for instance, harbor resonance inresponse to linear and monochromatic wave forcing.BW - Boussinesq Wave ModelThe state-of-the-art tool for studies and analysis of wave disturbance in ports, harbors and coastal areas. Now with full surf and swash zone dynamics.

Multiple grids.

MIKE 21 Flow Model FMnow with full dynamic coupling between eg flow, waves and sediments extending theapplication range further into coastal engineering andmorphology.

MIKE 21 links seamlessly and fullydynamically with other DHI Software products, including:

MIKE 11 - for combined 1D and 2D inland flood modelling - see also MIKE FLOOD

MOUSE - for advanced urban flood modelling.

The common file format ensures that output from one model can be used as input or boundary data in anothermodel, eg from LITPACK to MIKE 21or MIKE 21 to MIKE 3

Model Integration

Flexible mesh.

21

MARINE

Ask about other modules and packagesUniversity discounts availableMulticopy discounts availableThe above prices are for single-user

licences. Network licences are available.

4,900

25,300

from 6,900

2,900 -14,900

MIKE 21 ELP (PP+HD+AD)5,000 water points / 3,000elements (Other sizes and module combinations available)

MIKE 21 PP + HD (full commercial PP +HD single grid with no limitations)

MIKE 21 wave models

Add-on Modules

Pricing

Language Versions

3-in-One!Upgrade to flexible mesh and keep your single and multiple grid licences

1

2

3

2 3

Mul

tiple

HD

AD

ST

MT

CAMS

PA

SA

ECO Lab

SW

NSW

PMS

EMS

BW

PP HD ST Wav

es*

PA

= requires these modules

1

Sing

le

FM

Dynamic coupling between flow, waves and sediment

modules is included in FM

1

* NSW, PMS

www.dhigroup.com

MARINE

MIKE 3 is a professional engineering software package for 3D free-surface flows. It is applicable to simulations of flows, cohesive sediments, water quality and ecology in rivers, lakes, estuaries, bays, coastal areas and seas. MIKE 3 forms a unique professional software tool for consultancy services related to design, operation and maintenance tasks within the aquatic environment. MIKE 3 is the result of 20 years of continuous development and is tuned through the experience gained from hundreds of applications worldwide.

MIKE 3 in briefTrouble-free - advanced software tool with GUI facilities for the benefit of easy applications

Efficient - fast and reliablesimulation engines ensure high productivity

Handy - includes support software for data handling, analysis and presentation

Flexible - range of computational grids, modules and licence options available

Accepted - well-proven technology with a track record of 20 years in the business and widely used in all continents.

Assessment of hydrographic conditions for design, construction and operation of structures and plants in stratified waters Environmental impact assessment studiesCoastal and oceanographic circulation studies, includingfine sediment dynamics, sea ice simulations, etcLake hydrodynamics Water pollution studies and restoration projectsAnalysis of cooling water recirculation and desalination Water quality and ecological forecasting, e.g. algae bloomsPhenomena whenever 3D flow structure is important

Typical Application Areas

3D Modelling of Coastal Waters and Seas

Simulation EnginesMIKE 3 has the following simulationengines:

Single Grid - the classic rectilinear model easy to set up, easy I/O exchange, straight forward navigation in model and presentationMultiple Grids - dynamically nested rectilinear model with the ability to tailor grid resolution in areas ofinterest

Flexible Mesh - maximum flexibility for tailoring grid resolution within the model.

For the Single Grid and Multiple Grids versions, the fully time-dependent non-linear equations of continuity and conservation of momentum in three dimensions are solved by finite difference techniques with the variables defined on a rectangular staggered grid in x, y andz-space.

Two different hydrodynamic engines are included. A nonhydrostatic version, which applies an artificial compressibility, and a hydrostatic version.

The Flexible Mesh (FM) version uses a cell-centered, finite volume method for discretization of the flow and transport equations. In the horizontal plane (Cartesian or spherical coordinates), an unstructured grid consisting of triangles is used. In the vertical domain, a structured, layered discretization is used with dynamic surface adaptive grids.

MIKE 3

Single grid

1

22 www.dhigroup.com

MARINE

AD - Advection-DispersionSimulates the transport, dispersion and decay of dissolved or suspended substances. Typically used in cooling water and sewage outfall studies.

ECO Lab - Ecological ModellingRead about this module on page 18.

MT - Mud TransportA combined multi-fraction and multi-layer model that describes erosion, transport and deposition of mud (cohesive sediments) or sand/mud mixtures.

PA - ParticleSimulates transport and fate of dissolved and suspended substances. Used in risk analyses, accidental spillage, monitoring of dredging works, etc.

MIKE 3 simulation of a meteorologically forced salt water intrusion over the Drogden Sill between Sweden and Denmark. It shows the salinity at the surface, at -5 m and at -9 m.

PP HD PA Sing

leM

ultip

leFM

= requires these modules

HD

AD

MT

PA

SA

ECO Lab

MIKE 3 ModulesMIKE 3 consists of the following modules:

PP - Pre- and Post-ProcessingThe PP module offers an integrated work

environment providing convenient andcompatible routines that ease data input, analysis and presentation of simulation results.

HD - Hydrodynamics The HD module simulates the water level variations and flows in response to avariety of forcing functions. It includes a wide range of hydraulic phenomena inthe simulations and it can be used for any 3D free-surface flow. The Flexible Mesh (FM) model, which uses depth and surface adaptive vertical grid, is particularly suitable in areas with a high tidal range.

Ask about other modules and packagesUniversity discounts availableMulticopy discounts availableThe above prices are for stand-alone

5,900

38,100

5,600 -18,700

MIKE 3 ELP (PP+HD+AD)10,000 water points / 6,000 elements (Other sizes and module combinations available)

MIKE 3 PP + HD (full commercial single grid version with no limitations)

Add-on Modules

Pricing

MIKE 3 links seamlessly with otherDHI Software products. The common file format ensures that output from one model can be used as input or boundary data in another model, e.g. MIKE 21 -> MIKE 3

Model Integration

Language Versions

3-in-One!Upgrade to Flexible mesh and keep your Single and Multiple grid licences

1

2

3

Multiple grids

2

Flexible mesh

3

23www.dhigroup.com

MARINE

24

LITPACK ModulesLITPACK consists of the followingmodules:

PP - Pre- and Post-processing This module provides an integratedwork environment providing convenient and compatible routines. It simplifies the tasks of data input, analysis and presentation of simulation results.

Main ModulesLITSTP - noncohesive sediment transport in single pointsLITDRIFT - long shore current, littoral drift and annual net and gross sediment transport

Add-On Modules LITLINE - coastline evolution LITTREN - channel backfilling due to nonequilibrium sediment transport mechanismsLITPROF - profile development due to cross-shore transport.

Design and implementation of effective management strategies, either locally or regionally, require detailed knowledge of the ongoing physical processes controlling the transport and sedimentation of beach materials. LITPACK applies a unique deterministic approach to give you a very powerful tool for a wide range of coastal zone management applications.

LITPACK in briefFriendly - the intuitive interface makes it very easy and fast to build, run and interpret the model

Fast - deterministic approach is the most efficient for quick assessment of long shore sediment transport

Detailed - a true deterministic model less sensitive to calibrationparameters than empirical or semi-empirical models

Flexible - the integrated modular structure allows custom-made packages and facilitates extensions

Compatible - fully compatible with MIKE 21 ST; makes it easy to continue with full 2D/3D analysis of selected events

Supported - comes with a 12-month free hotline support and free updates.

LITPACK FeaturesLITPACK combines a technically strong deterministic sediment transport model with a very user-friendly graphical interface.It simulates a wide range of wave and current scenarios along straight or nearly straight coastlines. LITPACK combines these simulations into predictions of coastal profiles and long term coastline evolution.

LITPACKLittoral Processes and Coastline Kinetics Modelling

University discounts availableMulticopy discounts availableThe above prices apply to stand-alone

licences. Network licences are available.

3,000

3,000

LITPACK

Add-on modules

Pricing

Impact assessment of coastal worksOptimize beach redevelopment schemesDesign and evaluation of coastal protection Estimate channel backfillingConduct morphological baseline studies

Application Areas

Language Versions

www.dhigroup.com

MARINE

25www.dhigroup.com/mikecmap or mikemarinegis25 www.dhigroup.com/marine

WS Wave Analysis Tools

MIKE Animator is the ideal tool for interpreting and presenting complex two- and three-dimensional, multi-process modelling results. It offers a selection of presentation methods and display techniques and takes you one step closer to the virtual world of water modelling by providing a new level of functionality for the production of user-defined fly-through animations.

MIKE Animator in briefBridges the gap between specialist and non-specialist

Communicates model studies and ideas effectively within your team

Create realistic 3D sceneriesView model areas and simulation results in 3D Get better knowledge of study areasProduce professional fly-through animations Study reporting and presentations

Application Areas

WSWAT

MIKE Animator is jointly developed by Baird & Associates Coastal Engineers and DHI.

WSWAT include a number of advanced modules for detailed wave analysis: linear Spectral Analysis, Digital Filtering Analysis, Directional Wave Analysis and Crossing Analysis. WSWAT is based on DHI´s Wave Synthesizer technology and is a very strong tool for post-processing of MIKE 21 BW output.

Detailed analysis of time series data from numerical simulations, physical model tests or field measurementsDirectional analysis and digital filtering of spatial data setsOptimisation of port layouts and structural design

Application Areas

Your DHI Software Video CameraMIKE Animator

Language Versions

Language Versions

University discounts availableMulticopy discounts availableThe above price applies to stand-alone

licences. Network licences are available.

MIKE Animator 3,900

Pricing

University discounts availableMulticopy discounts availableThe above price applies to stand-alone

licences. Network licences are available.

WSWAT 2,900

Pricing

MARINE

25

Provides professionalpresentations to clients

Facilitates consensus-making and dialog with stakeholders.

WSWAT in briefEfficient - ideal for processing of large amount of data in time and space

Extensive - besides the many analysis tools it complies with MIKE Zero suite of graphic tools for presentation and reporting.

www.dhigroup.com