Midwest 03 2014
-
Upload
construction-equipment-guide -
Category
Documents
-
view
249 -
download
19
description
Transcript of Midwest 03 2014
$3.00
4
“The Nation’s Best Read Construction Newspaper… Founded 1957.”
®
MMiiddwweessttEEddiittiioonn
Northern Green Expo
Attracts Thousands...10
Broce. Waldon Join
Forces...28
AED Holds Annual Summit,
CONDEX Show…16
Inside
February 2, 2013 • Vol. IXX • No.3 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910
www.constructionequipmentguide.comPublished Nationally
Brenda RuggieroCEG CORRESPONDENT
A huge project involving the Mississippi RiverBridge is headed toward completion next year. Whilethe project owners are the Missouri and IllinoisDepartments of Transportation, the lead is the MissouriDepartment of Transportation (MoDOT), under projectdirector Gregory Horn. The project is actually made upof nearly 40 smaller projects. “This helps us to manage the overall cost of con-
struction and allows us to schedule construction aroundthe main span [the bridge],” said Andrew Gates, cus-tomer relations representative of the MoDOT St. LouisDistrict.The full dollar amount of the overall construction
project is reportedly about $700 million. The cost of themain span is $239 million. Construction began in Feb.2010, and the bridge and associated construction isscheduled to be open to traffic by early 2014.
Miss. River Span Job Sees Finish Line AheadMissouri and Illinois Departments of Transportation photo
With a main span of 1,500 ft. (457 m), thebridge will be the third largest cable
stayed bridge in the United States.
Significantly more construction firms areplanning to add new staff than plan to cut staffwhile demand for many types of private sectorconstruction projects should increase this yearaccording to survey results released Jan. 15 bythe Associated General Contractors of Americaand Computer GuidanceCorporation. The survey, conductedas part of Tentative Signs of aRecovery: The 2013 ConstructionIndustry Hiring and BusinessOutlook, provides a generally opti-mistic outlook for the year even asfirms worry about rising costs anddeclining public sector demand forconstruction.“While the outlook for the con-
struction industry appears to beheading in the right direction for2013, many firms are still grapplingwith significant economic head-winds,” said Stephen E. Sandherr,the association’s chief executiveofficer. “With luck and a lot ofwork, the hard-hit construction
industry should be larger, healthier, more tech-nologically savvy and more profitable by theend of 2013 than it is today.”Sandherr noted that significantly more firms
are planning to add staff this year compared tothe number of firms expecting to make layoffs.
He said that 31 percent of firms plan to add staffthis year, while only 9 percent plan to make lay-offs this year. The scope of those staff additionsare likely to be modest, however, with 79 per-cent of firms reporting they plan to hire 15 or
Outlook for Construction Improves for 2013see MODOT page 52
see OUTLOOK page 84
The Equipment Leasing and Finance Association(ELFA), which represents the $725 billion equipmentfinance sector, revealed its Top 10 EquipmentAcquisition Trends for 2013 on Jan. 14. Given thatevery year U.S. businesses, nonprofits and govern-ment agencies spend in excess of $1.2 trillion in cap-ital goods or fixed business investment (includingsoftware), financing more than half of those assets,these trends impact a significant portion of the U.S.economy. Businesses considering acquiring equip-
ment this year will consider numerous end-user bene-fits while weighing continued uncertainty related toeconomic conditions and fiscal policies.ELFA President and CEO William G. Sutton said,
“Equipment acquisition plays a critical role in drivingthe supply chains across all U.S. manufacturing andservice sectors. We have distilled recent research data,including the Equipment Leasing & FinanceFoundation’s 2013 Equipment Leasing & Finance
Equipment Leasing, Finance GroupReveals 2013’s Trends in Acquisition
see ELFA page 84
Table of Contents................4
Recycling Section ........29-43
Attachment Section ....47-49
Business Calendar ............62
Truck & Trailer Section ..............................................63-73
Parts Section ....................75
Auction Section ..........79-85
Advertisers Index..............86
Page 2 • February 2, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
PATT
EN C
ONST
RUCT
ION
PROD
UCTS
Call 877-688-2228Fax: 630-279-9243
www.pattencat.comComplete inventory available online
CALL 887-688-2228 INVENTORY CHANGES DAILY
ID# UE1811 $210,000
ID# N5791 $143,000
ID# UE1740 $149,000
ID# UE1788 $23,500
ID# UE1737 $56,000
YOURPREFERREDMIDWEST
USEDCAT
DEALER
YOURPREFERREDMIDWEST
USEDCAT
DEALER
Cat 226B2, 2009, W2130 NA, EROPS, A/C, Heat ..............$29,000
Cat 236B, 2005, UE1233, EROPS, Heat, Self-Leveling ......$25,000
Cat 252B2, 2008, W1819, EROPS, Heat, 1SPD, QC ..........$29,000
Cat 252B2, 2008, W1822, EROPS, A/C, 1SPD, QC............$29,000
Cat 252B2, 2009, W2083, Cab, QC, 2SPD ........................$30,000
Cat 252B2, 2009, W2087, EROPS, QC, 2SPD ..................$30,000
Cat 252B2, 2010, X0215, Cab, QC, 1SPD..........................$43,000
Cat 252B2, 2010, X0214, Cab, QC, 1SPD..........................$42,000
Cat 252B2, 2010, X0213, EROPS, QC, 1SPD ....................$45,000
Cat 289C, 2009, W2153 NA, Cab, A/C, Hyd QC ................$59,000
Cat 289C, 2009, W2115, EROPS, Heat, Hyd QC................$57,000
Cat 289C 2AIRH, 2009, X0003, EROPS, A/C, QC ..............$49,000
Cat 299C, 2008, W1968, EROPS, A/C, Hyd QC ................$50,000
Cat 299C, 2009, W2063, EROPS, A/C, Q/C........................$45,000
John Deere 320D, 2011, UE1603, EROPS, Bkt ................$29,900
CAT D4HIIIXL, 1996, UE1788, OROPS ..............................$23,500
Cat D5K LGP, 2008, N5803, Cab, 3rd Valve ....................$100,000
Cat D6K LGP, 2009, N6127, Cab, 4th Valve ....................$178,000
Cat 308DCR HMR, 2009, W2107 NA, EROPS, QC ..................$86,000
Cat 318C, 2005, UE1791, A/C, QC ....................................$88,000
Cat 320DL, 2008, UE1565, Cab, A/C, Boom 18’7”, Stick 9’6” $169,000
Cat 325CL, 2004, UE1713, Cab, Stick 10’6”, QC ......................$97,500
Cat 328DLCR, 2008, UE1518, Cab, QC............................$290,000
Cat 303CCR, 2008, W1865, Cab, A/C ................................$32,000
Cat 303.5CCR, 2007, UE1793, Aux Hyd ..............................$23,600
Cat 336DL, 2010, X0221, Cab ........................................$285,000
SKID STEERS
EXCAVATORS
DOZERS
Luke [email protected]
Miguel Lozano630-279-4400 (Español)
Cat CB34XW, 2008, UE1730, OROPS ................................$48,000
Cat CB32, 2009, N5975 ....................................................$42,000
Cat CB14, 2009, N5970 NA, Water Spray..........................$24,000
Cat CB14, 2009, X0285, Water Spray ................................$24,000
Cat CB24, 2010, X0152, FOPS, Wide Drum ....................$125,000
Cat CB-534C, 1998, UE1764, OROPS................................$25,000
Cat CP56, 2008, N5791, OROPS, Padfoot ......................$143,000
Cat CS54, 2008, N5757, OROPS, Sm Drum ......................$95,000
Cat CS54, 2009, N6078, Smooth Drum ............................$95,000
Cat CS54, 2009, N6085 NA, Smooth Drum ......................$95,000
Cat CS56, 2009, N6086, Cab, Smooth Drum ..................$115,000
Cat TL1055, 2008, N6124, EROPS, A/C ............................$80,000
Cat 953D, 2008, N5790, EROPS, 2.25 CYD GP Bkt ........$179,000
Cat 430 EX4, 2006, UE1737, Cab, Heater, A/C ..........................$56,000
Cat 906H, 2009, W1951 NA, Cab, A/C, Heat......................$69,000
CAT 907H, 2010, X0022, Cab ............................................$92,000
Cat 924H, 2007, N5786, EROPS, Heat, A/C, 2.6 CYD Bkt$105,000
Cat 930H, 2009, N6195, Cab, QC, Ride Ctrl ....................$157,000
Cat 924H, 2008, N5868, Cab ..........................................$109,000
Cat 924HZ, 2008, N5875, Cab, A/C, Heat ........................$112,000
CAT 938H, 2009, UE1723, EROPS, A/C, QC............................$179,000
Cat 950H, 2009, N6201, Cab, A/C, Heat ..................................$265,000
Cat 966H, 2008, UE1600, Ride Control ..............................$268,500
Cat 950G, 1999, UE1780, Bucket 3.75 CYD ......................$72,200
Cat 980GII, 2003, UE1724, EROPS, Ride Control............$144,000
Cat 988H, 2007, UE1688, EROPS, Rock Bkt, 9.0 CYD ....$260,000
WHEEL LOADERS/LOADER BACKHOES
TRACK LOADERS
TELEHANDLERS
COMPACTION
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 2, 2013 • Page 3
Illinois Truck & Equipment 320 Briscoe Drive Morris, Illinois 60450 www.iltruck.comToll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & [email protected]
Including: 100 Hydraulic Excavators
Long Reach Excavators
50 Bulldozers
50 Wheel Loaders
Mantis Cranes 18-70 Ton
30 Articulated Dump Trucks
On/Off Road Water Trucks
• Angle Blades & Winches Available
Page 4 • February 2, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction EquipmentGuide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.
Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changesto Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034.
Contents Copyrighted ©2013, by Construction Equipment Guide, which is a Registered Trademark, registered in theU.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced(including framing) in whole or part without written permission from the publisher. All editorial material, photo-graphs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyrightpurposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially.Contributor articles do not necessarily reflect the policy or opinions of this publication.
Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not respon-sible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertise-ments are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally andevery effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.
IN THIS ISSUESPECIAL SECTION…RECYCLING, CRUSHING AND SCREENINGBe sure to check out this special section! Keep up to date with the latest information on recycling, crushing and screening.
FEATURES…MORE THAN 6,000 ATTEND NORTHERN GREEN EXPOIN MINN.Show attendees included educators, government agencies, suppliers,arborists, landscape contractors, landscape architects, nursery greenhousesand others from the green industry.
ASSOCIATED EQUIPMENT DISTRIBUTORS HOLDANNUAL SHOWThe annual Associated Equipment Distributors (AED) Summit and CONDEXshow was held Jan. 14 to 17 in Las Vegas.
ASA-MIDWEST COUNCIL DONATES 400 LBS. OF FOODTO LOCAL CHARITY The donations were collected at the association’s annual Casino Nightholiday party on Dec. 19. The donation will help to provide more than1,400 meals to the St. Louis area’s needy.
SMARTEQUIP FOUNDER SCHUESSLER LEADSEUROPEAN EXPANSIONSmartEquip founder and executive vice chairman, Alexander Schuesslerwill serve as president of the company’s newly formed international group.
BROCE MANUFACTURING JOINS FORCES WITHWALDON EQUIPMENTIn 1963, Broce introduced the first-ever mid-mount self-propelled sweeperand continues to be the leader in that market.
NORTRAX NAMES TIM MURPHY CEO, PRESIDENT;ANNOUNCES PROMOTIONSDale Gessell was appointed regional vice president of Nortrax’s midwestregion. Chip Cramer was appointed general manager of the Minnesotabranches in Bemidji, Grand Rapids and Duluth. Timothy J. Murphy wasappointed global director, Sugar Product Line.
ALTORFER INC. SAYS FAREWELL TO DICK RUPP,WELCOMES TOM WILLAltorfer Inc. welcomes Tom Will as store manager of the Hannibal, Mo.,construction location, effective Jan. 1, 2013. Will replaces Dick Ruppfollowing his retirement on Dec. 31, 2012.
28
26
26
16
10
29
62 BUSINESS CALENDAR74 CLASSIFIEDS79 COMING AUCTIONS
EQUIPMENT…40 POWERSCREEN XH320X Mobile Impact Crusher68 CATERPILLAR MT5300D Mining Truck
10
16
26
28
MIDWEST EDITIONCirculated Throughout • North & South Dakota • Nebraska
• Kansas • Minnesota • Iowa • Missouri• Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky
Founder, Publisher & CEO Edwin M. McKeon Sr.Midwest Publisher Joseph S. McKeon
Editor In Chief Craig Mongeau Associate Editor Christine Reckner
Editorial Consultant Pete Sigmund Production Mgr. John Pinkerton
Controller Tom WeinmannCirculation Mgr. Rolf Krog
Asst. Circulation Mgr. Cathy Printz
Main office 470 Maryland Drive Fort Washington, PA 19034
215/885-2900 Toll Free 800/523-2200
Fax 215/885-2910Web site www.constructionequipmentguide.com
Editorial e-mail [email protected] e-mail [email protected]
For advertising rates Contact Joseph S. McKeon
•Illinois • Wisconsin • Northwest Indiana
• Missouri • Kansas
773/769-4090Toll Free 800/632-0233
Fax 773/769-4280e-mail [email protected]
Contact Ed Bryden• Central and Eastern Indiana • Michigan • Ohio
• Kentucky
440/268-9690Toll Free 800/810-7640
Fax 440/268-9691e-mail [email protected]
Contact Patrick Kiel • Iowa • Minnesota • Nebraska • North Dakota
• South Dakota
952/353-1770Toll Free 866/413-4265
Fax 952/353-2750e-mail [email protected]
29
56
77
®
Mobile LinkedIn Facebook Twitter YouTube
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 2, 2013 • Page 5
Blaw Knox PF115, ’89 ..........................................................$11,500LeeBoy 1000D, ’03, 1,475 hrs ..............................................$19,500LeeBoy 8500HD, ’06, 2,750 hrs ............................................$43,500LeeBoy 8500HD, ’10, 2,140 hrs ............................................$54,500LeeBoy 8500HD, ’00, 2081 hrs ............................................$19,500LeeBoy 8500LD, ’00, 1,991 hrs ............................................$29,500LeeBoy 8500LD, ‘03, 3683 hrs..............................................$19,500
Cat RM350B, ’02, 6617 hrs ................................................$117,500Wirtgen W2000, ’03, 2,996 hrs ..............................................$CALLWirtgen W2000, ’96, 9,346 hrs ..............................................$CALLWirtgen WR2000, ’11, 334 hrs ................................................$CALLWirtgen W2100, ’04, 8,373 hrs ..............................................$CALL
Komatsu WB140-2N, ’04, 2,805 hrs......................................$27,500
Komatsu CD60R-1A, ’05, 1,136 hrs ....................................$109,000Komatsu HD465-5, ’02, 17,763 hrs ........................................$CALLKomatsu HD465-5, ’02, 17,599 hrs ........................................$CALLKomatsu HD465-5, ’02, 17,268 hrs ........................................$CALLKomatsu HD785-5, ’01, 22,508 hrs ........................................$CALLKomatsu HD785-5, ’01, 25,415 hrs ........................................$CALLKomatsu HM400-2, ’07, 7,880 hrs ......................................$199,500Moxy MT31, ’02, 3479 hrs ..................................................$82,000
Concept Products CP2000, ’05..............................................$13,500
Atlas Copco ROC F9-11, ’10....................................................$CALL
Baker Kurtz 4671 Impactor, ’07 ..........................................$325,000Hazmag APS1313-K Impactor ..............................................$65,000
Bomag BW205AD, ’02, 3,520 hrs..........................................$34,500Hamm HD13, ’02, 2,937 hrs..................................................$14,500Hamm HD14VV, ’08, 816 hrs ................................................$32,500Hamm HD90 Ozzy, ’04, 4,300 hrs ........................................$54,500Hamm HD130, ’03, 1789 hrs ................................................$49,500Hamm HDO90V, ’09, 849 hrs ................................................$77,500
Cat 963C, ’01, 4800 hrs ........................................................$74,500Cat D4D, ’72 ............................................................................$7,000Cat D5G LGP, ’05, 3,150 hrs..................................................$52,500Cat D5H LGP, ’93, 9961 hrs ..................................................$54,500Cat D8N, ’87 ..........................................................................$78,000Dresser TD8E, ’81 ................................................................$13,000Komatsu D31PX-21A, ’05, 882 hrs ......................................$52,500Komatsu D37P-5, ’98, 2,624 hrs ..........................................$21,500Komatsu D51PX-22, ’08, 2,436 hrs ....................................$129,500Komatsu D65EX-15EO, ’08, 1,365 hrs ................................$199,500Komatsu D65PX-15EO, ’06, 3,199 hrs ................................$146,500Komatsu D65PX-15EO, ’08, 5,372 hrs ................................$127,500Komatsu D65PX-12, ‘96, 4,969 hrs ......................................$49,500Komatsu D155AX-5, ’03, 6,809 hrs ....................................$224,500
Case CX240B, ’07, 4,810 hrs ..............................................$114,500Cat 324DL, ’06, 4,605 hrs ..................................................$123,500Kobelco SK480LC, ’05, 11,858 hrs ......................................$54,500Komatsu PC78UU-6, ’04, 4,085 hrs ......................................$44,500Komatsu PC88MR-8, ’08, 827 hrs ........................................$89,500Komatsu PC88MR-8, ‘09, 1,195 hrs......................................$92,500Komatsu PC138USLC-8, ’09, 2,363 hrs ..............................$104,500Komatsu PC200LC-8, ’06, 4,617 hrs ..................................$132,500Komatsu PC220LC-8, ’09, 4,020 hrs ..................................$149,500Komatsu PC220LC-8, ’09, 5,789 hrs ..................................$117,500Komatsu PC300LC-6, ‘97, 13,350 hrs ..................................$32,500Komatsu PC300LC-7, ’02, 4,887 hrs ..................................$134,500Komatsu PC400LC-6LM, ’03, 8,516 hrs................................$69,500Komatsu PC400LC-6LM, ’03, 8,760 hrs................................$72,500Komatsu PC400LC-6LM, ’02, 10,834 hrs..............................$72,500Komatsu PC400LC-7, ’04, 9,350 hrs ....................................$99,500Komatsu PC400LC-7, ’04, 10,300 hrs ..................................$99,500Komatsu PC400LC-7, ’04, 12,499 hrs ..................................$84,500Komatsu PC400LC-8, ’07, 2,811 hrs ..................................$239,500Komatsu PC600LC-7, ’04, 8,449 hrs ..................................$177,500Komatsu PC600LC-7, ’05, 10,328 hrs ................................$214,500Komatsu PC600LC-7, ’06, 9,977 hrs ..................................$185,000Komatsu PC750LC-7, ‘05, 4,517 hrs ......................................$CALL
Deere 320D, ’10, 287 hrs......................................................$32,500Mustang MTL16, ’05, 2,349 hrs ............................................$18,500
Doppstadt SM617, ’09, 290 hrs ..........................................$139,000Doppstadt SM720, ’09, 235 hrs ..........................................$185,000Doppstadt SM726, ’09, 257 hrs ..........................................$225,000
Cat 920, ’73, 7216 hrs ............................................................$7,000Cat 980C, ’86, 7216 hrs ........................................................$59,000Komatsu WA200-5, ’05, 617 hrs ..........................................$97,500Komatsu WA250-1, ’95, 17,158 hrs ......................................$29,500Komatsu WA320-6, ’08, 3961 hrs ......................................$126,500Komatsu WA400-5L, ’04, 7,169 hrs ......................................$94,500Komatsu WA450-6, ’07, 7,355 hrs ......................................$196,500
Franklin 3000/Stroke Head, ’92 ..............................................$8,500Timbco 415D/Risley, ’00, 8,629 hrs....................................$120,000Valmet 415EX/Rolly II, ’05, 10,092 hrs ..............................$145,000Valmet 840.3/8, ’06, 9,592 hrs ..........................................$180,000Valmet 840.3/8, ’08, 10,006 hrs ........................................$190,000Valmet 911C/965 Head, ’97 ..................................................$35,000Valmet 911C w/965 Head, ’99 ..............................................$65,000
Austin Western Super 500 ......................................................$7,500Komatsu GD655-3EO, ’09, 1,287 hrs ..................................$189,500
EXCAVATORS
WHEEL LOADERS
FORESTRY
DOZERS
SHREDDERS, TROMMELS
PAVING
MILLING
BACKHOE LOADER
OFF ROAD TRUCKS
AIR CURTIN DESTRUCTORS
CRUSHING, SCREENING
COMPACTION
SKID STEERS
GRADERS
ROCK DRILLS
15 Roland Branch Locations in IL, IN, MI, MO, and WI
VISIT
ROLAND MACHINERY.COM
Call Jay Germann (217) 789-7711 • Email: [email protected]
Komatsu GD655-3EO, ’09, 1287 hrs......$189,500 Komatsu PC88MR-8, ’08, 827 hrs ..........$89,500
Valmet 840.3/8, ’08, 10,006 hrs............$190,000 Valmet 911C w/965 Head, ’99 ................$65,000
Financing Available for Qualified Buyers
Quality Used Equipment...with support to back it up
Page 6 • February 2, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CX130 Excavator
$410/Day, $1,230/Week, $3,690/Month
CX240 Excavator
$700/Day, $2,100/Week, $6,300/Month
CX210 Excavator
$580/Day, $1,740/Week, $5,220/Month
CX460 Excavator
$1,235/Day, $3,705/Week, $11,115/Month
CX160 Excavator
$475/Day, $1,425/Week, $4,275/Month
CX330 Excavator
$875/Day, $2,625/Week, $7,875/Month
CX225 Excavator
$755/ Day, $2,265/Week, $6,795/Month
Excavator Rental Specials
Rent Today!
Clean, reliable equipment Competitive rates Rent by the day, week, or month Delivered to your job site
McCannOnline.com
IllinoisAddison
630-627-0000
Bolingbrook*630-739-7770
Chicago312-942-9200
Crestwood708-597-3110
McHenry*815-385-0420
Wauconda847-526-9444
IndianaSchererville*219-865-6545
* Case authorized dealer location
Serving the Constructor ®
2005 Takeuchi TB135, s/n 13516545, 2450Hrs, Cab w/Heat & AC, Dozer Blade, 12” and24” Bkts ..........................................$31,000
2004 Case 40XT, s/n JAF0396792, ROPS,Cold Start, Foot Throttle, 10x 16.5 Tires, 60”Bkt ..................................................$11,500
2003 Case 40XT, s/n JAF0387813, 850 Hrs,ROPS w/Soft Cab, Heater, 10 x 16.5 Tires,60” Bkt ............................................$14,900
1994 Case 721B, s/n JEE0039571, 6250Hrs, Cab w/Heat, Pro 1000 ACS Couplerw/2.75 Yd Bkt..................................$38,000
2008 Ausa Dumper, s/n 09259426, 110 Hrs,1.37 Cu Yrd Dumper, 13 Hp Hatz Diesel,2wd ..................................................$7,000
2006 Case 445, s/n N6M438889, 3700 Hrs,ROPS, Two Speed, Block Heater, Single HydSelf Level, 12 x 16.5 Tires, 73” Bkt $18,500
2011 Case TR270, s/nJAFTR270PBM438711, ROPS, Hyd Coupler,E-H Controls, Two Speed, 78” Bkt ..$40,500
2006 Case CX210, s/n DAC213006, 5060Hrs, 18’8” Boom Arm, 7’10”, Shoe 3-BarSteel 24”, Control Pattern Valve, Dbl ActingAux Hyd, Coupler ............................$82,000
Mark Kruepke • (630) 739-7770Bolingbrook, IL
Contact us at [email protected]
View our complete Used & “Like New” inventoryat McCannOnline.com
McCann Rents a full line of heavy and light constructionequipment. Call us today to supply your next rental.
To2
!morFFre sohoC
C LLLA AS)6688(
WWWW R
MA RO GUOD584 - 0817
BR DESU MOC
WWWW R.
BR DESU . MOC
STARE Q U I P M E N T
LT D .
Call Sales 515-283-2215 • 800-352-54011401 2nd Ave • Des Moines, IA 50314
�CONSTRUCTION EQUIPMENT & SUPPLIESSINCE 1968
CHECK OUT OUR WEBSITE: www.starequip.comDes Moines • Ames • Cedar Rapids • Waterloo
2009 Mustang 2700VSerial #: 02700T00041022, Equipment #:04102223131, 543 Hrs, Vertical Lift Skid Loader,Turbo engine, 2 speed, hand/foot controls, auxiliaryhydraulics, power multi-tach, block heater, 2,700#lift capacity. $34,995
2006 Mustang 2054Serial #: 2054V00007379, Equipment #:0073792309, 3160 Hrs, Skid Loader with 50 HPYanmar diesel engine, cab, heat, and T-bar controls. Unit is in good working condition, sold as is. $13,995
2005 Takeuchi TL150Serial #: 21502433, Equipment #: 5024332324,1348 Hrs, Track Loader with 100+ hp diesel engine,open ROPS, near new bucket, tracks near 65%, andfreshly serviced out of the shop. $29,950
USED SKID STEER BARGAINS
2006 Takeuchi TL140CSerial #: 21404631, Equipment #: 4046312322,4159 Hrs, Track Loader with 80 hp diesel engine,cab, heat & a/c. $22,995
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 2, 2013 • Page 7
Please Contact Bob Williams or Jeff Speer 11200 W Silver Spring Rd. Milwaukee, WI 53225
800/353-1944 414/461-9100 www.FABCO.comOutside WI & Upper Michigan Within WI & Upper Michigan Hundreds of machines. Listings updated daily.
2001 Cat 345BL II..................................$69,500S/N AGS00921, 13,744 hours, EROPS, coupler,
GP-bucket, cylinders good, u/c good
2004 Cat 740 ........................................$139,500S/N AXM01570, 7720 Hrs, No Tailgate, Tires Good
1986 Cat D8L ........................................$77,500S/N 53Y04266, 15,980 Hrs, EROPS, Drawbar, SUBlade, U/C 50% Eng & Trans Rebuilt at 11,000 Hrs
1998 Cat IT28G......................................$41,000S/N 8CR01529, 16,143 hours, EROPS, std differentials, bucket, tires 50%
1979 Cat 631D ......................................$29,700S/N 24W02603, 9284 hours, OROPS, tires fair
2006 Cat 966H ....................................$210,000S/N A6G00225, 7435 hours, EROPS, A/C, GP-bkt,
tires good, engine rebuilt at 7422 hours
2011 Cat 262C........................................$33,000S/N MST03900, 2194 Hrs, EROPS, A/C, Hyd Quick
Coupler, 2-Speed, Bkt, Tires Fair
2000 Aljon 81K ......................................$35,000S/N 13728, 13,500 Hrs, EROPS, Trash Blade, Terra
Wheels Good, Pumps Have Been Rebilt
2005 Cat 216B ......................................$16,500S/N RLL02914, 1703 Hrs, OROPS, Manual QuickCoupler, Bkt, Goodyear Rubber Track System
1988 Cat 627E........................................$61,500S/N 6GB00655, 22,447 hours, EROPS, push pull,
retarder, p t guard, tires good
2005 Case 450 ......................................$22,500S/N N5M417832, 3842 Hrs, EROPS, Heat, Hyd, Coupler,Bkt, 2-Speed, New Eng & Pump Drive at 2500 Hrs
2004 Cat 740 ........................................$135,000S/N AXM01186, 8360 Hrs, Trans Rebuilt at
7949 Hrs
2007 Cat D5GLGP ................................$69,500S/N RKG03458, 3678 Hrs, EROPS, A/C, PAT Blade,
Joystick Steer, Drawbar, U/C Good
2011 Kleemann MC110Z....................$550,000S/N K0040240, 380 Hrs, Track Mounted, 300 TPH,
44”x28” Inlet
2010 John Deere 320D ........................$21,500S/N 181788, 1458 Hrs, OROPS, Manual Coupler,
Hand & Foot Controls, Bkt, Tires Good
1998 Cat 140H ....................................$125,000S/N 2ZK03040, 7242 hours, EROPS, heat, A/C,
tires fair, trans rebuilt
Page 8 • February 2, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
USED EQUIPMENTAuthorized Bobcat® DealerBobcat 440 ................Starting at $4,500Bobcat 463’s ..............Starting at $8,000Bobcat 542B ..............Starting at $6,900Bobcat 642 ..............................$7,500Bobcat 642B ............................$8,500Bobcat 743 ................Starting at $8,000Bobcat 751 ......Several Starting at $9,900Bobcat 753 ..............Starting at $10,000Bobcat 763F, Series, Open Cab ....$11,500
Bobcat 773G, With Heat ............$15,900Bobcat 843, Heated Cab ............$10,000Bobcat 853’s ............Starting at $11,000Bobcat 863, With Heat ..............$12,900Bobcat 863G ............................14,900Bobcat 873 ............................$17,900Bobcat S130, 2006, Heated Cab ......CALLBobcat S185s, With Heat and Air, 500Hours to 5000 Hours....Starting at $14,900Bobcat S250..............Starting at $17,500
Compact Track MachinesBobcat T190’s............Starting at $17,500Bobcat T200..............Starting at $17,500Bobcat T250, Gold ......Starting at $24,500Bobcat T300..............Starting at $25,000Other BrandsGehl 4615 Skidloader, Open Canopy $8,500Mustang 2105 ............................CALLNew Holland L175........................CALLJohn Deere 250/260 Models Available....................................................CALL
ExcavatorsBobcat 331’s, Several w/Heat & Open
Canopys ..................Starting at $15,900
Bobcat 334 ................................CALL
Bobcat 337D, A/C, HT................$35,900
Bobcat 341 ..............Starting at $29,990
Bobcat 442 ....Several Starting at $45,000
Large Used Trailer Selection Starting at $1,500
Authorized Bobcat® Dealer
NEW M SERIES IN STOCK!
BobcatExcavatorsin Stock,Call forPricing
Bobcat Forestry Cutter on T320, for Rent
Largest Selection in the Midwest!
Bobcat Tractors in Stock Now! Call for Pricing.
Toolcats in Stock, Call for Pricing New Bobcat S160, Call for Pricing
U.S. Hwy 12 W • Dassel, MN 55325 320/275-2737 • Toll Free 888/679-4857New Location: Farm-Rite Wilmar 1515 West Litchfield Ave. • Wilmar, MN 56201 320/235-3672
www.farmriteequip.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 2, 2013 • Page 9
ALEX E. PARIS CONTRACTING COMPANY, INC.Route 18 - Atlasburg (Pittsburgh), PA 15004
724/947-2235 Day/Night Fax 724/947-3820Call Andy Miller Established 1928
Our Greatest Assets .. Our Employees
Cat IT28G, 1998, EROPS, coupler, 3rd valve, 20.5 x 25rubber, 15K hours, work ready . . . . . . . . . . . .$42,500Komatsu WA500-1, 1992, EROPS, w/ A/C, high-reach, 6.5 cy GP bkt, 29.5x25 . . . . . . . .$79,500John Deere 624G, 1996, EROPS, quick coupler, GPbkt, 20.5x25 tires . . . . . . . . . . . . . . . . . . . . . .$46,000Volvo L60E, 2005, EROPS, coupler, aux hyd, boomsusp, 20.5R25, v. good . . . . . . . . . . . . . . . . . .$89,500
IR SD100D Pro-Pac Vibratory Compactor, 1999,Hydrostatic trans 84" smooth drum, drum drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52,500IR SD105DX, 2002, 84" drum drive, OROPS, very clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,500IR SD105DX, 2002, 84" drum, OROPS, clean $69,500IR SD150F, 84" Padfoot, 1998, OROPS . . . . .$49,500IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit,ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62,500Cat 815B, 1993, OROPS, S-Blade w/Tilt, Good Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$68,000Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, verynice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205,000(4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, allwork ready . . . . . . . . . . . . . . . . . . . . . .From $79,500Multiquip MR8G Walk Behind Vibratory Compactor,1997, Briggs & Stratton 8 HP gas engine . . . . .$2,500Rammax Walk Behind Rollers, over 25 in stock, lever& remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000(8) Sheepsfoot, 48" and 60", double drum & singledrum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500
Case/IH 485 Utility Tractor, 1986, Case 3 cyl dslengine, 55 gal water tank . . . . . . . . . . . . . . . .$10,500Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72"hydraulic broom . . . . . . . . . . . . . . . . . . . . . . .$11,500Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hydangle tongue, scrapers, 2” axles . . . . . . . . . . . .$9,500
Cat 953LGP, 1984, OROPS, 20 DBG, GP Bkt .$37,500Cat 963, 1983, OROPS, 2.6 cy GP bkt, 17” DBG pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46,000
Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD,29.5R25, A/C, 29 cy cap. sideboards, tailgate (current-ly off work), work ready . . . . . . . . . . . . . . . .$127,500Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25,working everyday . . . . . . . . . . . . . . . . . . . . .$145,000Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25,A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C,P/S trans, tailgate, work ready . . . . . . . . . . .$115,000Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires,approx 7,000 hrs, good condition . . . . . . . .$147,500Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C,P/S trans, working everyday on jobsites . . . . .$87,500Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C,P/S trans, 26 cy, working everyday on jobsites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD,23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500
(2) Cat D6TXW, 2008, ROPS w/sweeps, a-blade,winches, v. good . . . . . . . . . . . . . . . . . .$175,000 Ea.Cat D8N, 1991, ROPS, drawbar, S-U blade . .$85,000(2) JD 450G, 1996, wide tracks, ROPS, PAT blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,000 Ea.
Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel,10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500Grove RT58C, 1981, down cab, 18 ton r.t., 70' boomanti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500
Cat 613C Water Wagon, 1994, 5000 gal drop tank,ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500Cat 621F, 1996, Scraper, OROPS, 33.25x2, very goodcondition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALLCat 621E, 1989, Scraper, OROPS, 33.25x29, very nice
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL
JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick cou-pler, 6-7000 hrs, Fleet maintained . . . . . . . . .$29,000Gradall-Hopto 300, 1968, G.M. diesel UP, on rubber,operational . . . . . . . . . . . . . . . . . . . . .$10,500/OFFER
Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, longstick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,500Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44"Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43,500Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" bkt, 27.6"TBG pads, work ready . . . . . . . . . . . . . . . . . . .$57,000(5) Komatsu PC128UU, 1996, offset boom, rubber tracks, low hrs . . . . . . . . . . . . . . . . . . . . .CALLKomatsu PC160 LC-7KA, 2004, 24” TBG pads, JRBcoupler, plumbed, 8’6” width, nice, work ready . .CALLVolvo EC460B LC, 2003, 4600 hrs, 23’ boom, 11’ stick,5.12 cy bkt, 22,000# ctwt, hammer/shear plumbingvery good condition . . . . . . . . . . . . . . . . . . .$159,000
(2) 48' Box Vans w/Liftgates, Good Condition . .CALL
IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL
(12) Allmand Light Plants, 2008-2010, diesel, s/a tow-type, (4) MH lights, excellent . . . . . . . . .From $5,200
Case 580L Rubber Tire Loader Backhoe, 1997,OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500
John Henry Drill Mtd on Cat 320N, 1994, 24' mast,Duraquip dust collection . . . . . . . . . . . . . . . .$150,000
(2) Balderson Broom Attachment for Cat IT Machines,8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea.
BUCKETSPC1000, 84" Digging Bucket . . . . . . . . . . . . . .$9,500Over 100 Excavator, Loader, Specialized & Grapple
Buckets in Stock-Call For Your Needs
FORKS(8) IT28F/G Forks, Balderson qc, 48"-60" pallet style,excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000
Others Available CallPrices Are Negotiable - At Your Inspection
All Equipment is Owned & Operated By ALEX E. PARIS CONTRACTING CO., INC.
TRUCKS & TRAILERS
CRAWLER LOADERS
OFF ROAD HAULERS
MOTOR SCRAPERS
DRILLS
ATTACHMENTS
MISCELLANEOUS
WHEEL LOADERS
HYDRAULIC EXCAVATORS
CRAWLER TRACTORS
COMPACTORS
LANDSCAPING
CRANES
SPECIALS
BACKHOES
AIR COMPRESSORS
Page 10 • February 2, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
see EXPO page 46
More Than 6,000 Attend Northern Green Expo in Minn.More than 6,000 attended the Northern
Green Expo Jan. 9 to 11 inMinneapolis, Minn.
The show featured hundreds of exhibitorsand offered many seminars.
Key speakers included Don Shelby; AdrianBloom, Bloom’s Nurseries Ltd.; John Kennedy,John Kennedy Consulting; Charles VanderKooi, Vander Kooi and Associates Inc., andmany others.
Show attendees included educators, govern-ment agencies, suppliers, arborists, landscapecontractors, landscape architects, nursery green-houses and others from the green industry.
For more information, visit www.northern-greenexpo.org/.
Stonebrooke Equipment, Burnsville, Minn., displayedthis expandable Fisher plow. Inside SalesRepresentative Josh Sowada said his company haseverything from plows to lights and toolboxes towinches.
Charles Mathison (L) of Bachman’s, Lyndale, Minn.,stopped by the Titan Machinery booth to talk withAndy Bethel about new equipment, including the TerexPT-30.
(L-R): Tim Rients, territory manager of Road Machinery &Supplies, Savage, Minn., shows Schifsky Landscaping Inc.owners Troy and Sheila Schifsky of Stillwater, Minn., the lat-est features of this Takeuchi TL10 track machine.
An overhead view of the Northern Green Expo floor.
Nuss Truck & Equipment Regional Sales ManagerPeter Stroh (L) answers questions about his compa-ny’s equipment lineup for Andrew Berthiaume, land-scape foreman of JT Construction, Elk River, Minn.
(L-R): John Braunshausen, Dan Scharber and Eric Brunelle,Scharber & Sons, Rogers Minn., showcased many pieces ofequipment, like this John Deere 6125R.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 2, 2013 • Page 11
Milwaukee, WI1-800-236-6900Fax 414-541-1892
Wausau, WI1-800-242-7113Fax 715-675-9748
Crushing & Screening Div.Little Chute, WI1-800-236-8318Fax 920-788-6753
YOUR AUTHORIZED DEALER
in WISCONSIN and UPPER MICHIGAN for:
For information on our in-stock equipment, contact Lanny Peterson at:[email protected] or
mobile 1-715-574-8089 or 1-800-242-7113
AGGREGATE EQUIPMENTALLIS RT2448 PORTABLE JAW PLANT, 1993, with 24”x48” Jaw, 48”x20’ Vibrating Grizzly Feeder, Front DischargeConveyor, Six Hydraulic Legs, Tri-Axle Chassis, Cummins NT855 Diesel with Hydraulic Drives for Feeder & Conveyor............................................................................................................................................................................$185,000JCI K-300 “KODIAK” PORTABLE CONE PLANT, 300 hp electric motor, 36”x 20’ side discharge conveyor, 36”x 35’feed conveyor, motor control panel, hydraulic leveling......................................................................................$375,000POWERSCREEN 510 COMMANDER RINSER SCREEN PLANT, 11.8 Yd. hopper with hydraulic dump grizzly, 36” feedconveyor, 5x10 3-Deck screen, tandem axle, Deutz diesel ..................................................................................$52,400
EXCAVATORSDEMAG H95 MASS EXCAVATOR, Powered by a Cat 3408 Diesel, with a 24’7” Gooseneck Boom, and a 10’8”Stick with 43’6” Reach and 25’ Digging Depth, 7.2 cu yd HD Rock Bucket, Approx. 220,000 Lb. Working Weight,5800 Frame Hours and Recent Engine Rebuild......................................................................................$125,000LIEBHERR R974B HDSL UTILITY CRAWLER EXCAVATOR, Powered by a 471 HP Liebherr D9408TI Diesel,33’11” Semi-Gooseneck Boom with 15’5” Stick, 5 cu yd HD Bkt, 21’x14’ 4” Wide U/C with 30” Track Pads adnRemovable Sideframes, Approx. 190,000 Lb. Working Weight ....................................................................CALLLIEBHERR R954C HD “LITRONIC” CRAWLER EXCAVATOR, (Several 2006-2007 Models Available) w/VariousBoom/Stick Combinations and Buckets Available, 326HP Liebherr D936L Six-Cyl. Tier 3 Diesels, HydraulicallyRemovable Counterweights, 124,000 to 130,000 Lb. Working Weights ......................................................CALL
CRANESGROVE RT760 60 TON CAPACITY ROUGH TERRAIN CRANE, 1993, with Cat Diesel, 110’ Power-Pinned Boom,32’ to 56’ Telescopic Offsettable Swingaway, Main & Auxiliary Hoists, 29.5x25 Tires, Ready to work..$179,900GROVE TM9120 100 TON TRUCK CRANE, 1997, 42’ to 130’ boom, 33’ to 58’ offsettable telescopic swingaway,Grove HO50 main & aux. hoists, LMI, Cummins 6CT8.3 diesel, mounted on a Grove 8 x 4 chassis with aCummins N14 diesel and Roadranger transmissions. Tandem boom dolly ..........................................$395,500GROVE RT855B 55 TON ROUGH TERRAIN CRANE, 1996, with Cummins diesel, 37’ to 115’ boom, 35’ to 60’swingaway, LMI, Grove model HO30 main & aux. hoists, 29.5x25 tires ..............................................$189,500MANITOWOC 11000 100 TON CAPACITY CRAWLER CRANE, 2008, (100 Ton capacity @ a 14' radius), with a332 hp Hino 6 cylinder Tier III diesel, 200' main boom, 60' jib, LMI, 36” crawler shoes, approximate workingweight of 218,000 lbs. with 74,970 lb. 5-piece counterweight, counterweight and side-frame removal systems.3020 hours ..................................................................................................................................................CALL
GROVE HYDRAULIC CRANES • PETTIBONE EXTENDO LIFTS and CARRY LIFTS
• LIEBHERR EXCAVATORS, MATERIAL HANDLERS, CRAWLERCRANES and HYDROSTATIC WHEEL LOADERS • GOMACO PAVERS • KOLBERG/PIONEER/
JCI AGGREGATE EQUIPMENT • SANDVIK and HAZEMAGCRUSHERS • MANITOWOC CRANES
MANITOWOC 11000 CRAWLER CRANE GROVE TM9120 TRUCK CRANE
Large Selection of New & Used Equipment in Stock.
View us at:www.amstate.com
Contact Marty in Illinois1-800-307-0221
Photos & Detail Descriptions view:
www.finkbinerequipment.com
CEDAR RAPIDS CR452 - ‘12 • Rubber Tired, Stretch 20E, Top Con System V, 400 Hrs..$256,183CEDAR RAPIDS CR662RM - ‘10 • Mat. Transfer Vehicle w/ Hopper Insert, 1250 hrs......$249,982CEDAR RAPIDS CR662RM - ‘11 • Mat. Transfer Vehicle w/Hopper Insert, 702 Hrs ........$358,300MAULDIN 1500 - ‘03 • Track, Conveyor Fed, 8’-13’ Screed, 844 Hrs ................................$29,950MIDLAND SPR-6 - ‘11 • RH Discharge Widener to 6’, 390 Hrs ........................................$79,512
CALL items may be on rent causing pricing and hours to vary.
ROADTEC RX400 - ‘11 • 48” Cut, 4 Track, Front Loading, Mill w/803 Hrs ..........................$319,950SUPERIOR BROOM DT80J - ‘12 • Fully Loaded Mid Mount Broom, 264 Hrs ........................$33,589WIRTGEN W50 - ‘11 • 20” Cut, 3 Wheel, Rear Discharge Mill w/284 Hrs ......................$139,950WIRTGEN W500 - ‘02 • 20” Width, 3 Wheel Mill w/ Load-Out Conveyor, 1600 Hrs ..........$76,500
SAKAI GW750 - ‘11 • Vibratory Pneumatic, 79’ Wide, 320 Hrs ........................................$99,782SAKAI R2H-2 - ‘10 • 3 Wheel Static Roller, 83” Wide Coverage, 350PLI, 450 Hrs............$85,000SAKAI SW800II - ‘09 • 67” Dbl Drm Vib, 1170 hrs ..........................................................$55,000SAKAI SW800II - ‘11 • 67” Dbl Drm Vib, w/remaining standard and EPTW, 182 hrs ......$84,320SAKAI SW850-2 - ‘10 • 79” Dbl Drm Vib w/balance of Std warranty and EPTW, 541 hrs $78,500SAKAI R2H-2 - 3 Wheel Static Rollers, 83”, *(7) machines in stock starting at (2012 w/415 hrs)..........................................................................................................................................$77,000SAKAI SW800 - 67” Double Drum Vibratory Rollers, *2012 w/85 hrs, $94,393; *2011 w/234hrs, $82,320; 2009 w/1170 hrs, $55,000SAKAI SW850-2 - 79” Double Drum Vibratory Rollers, *2011 w/99 hrs, $99,500; *2010 w/622hrs, $78,500SAKAI SW880 - 79” Double Drum Vibratory Roller, *2012 w/very low hours......................$CALLSAKAI SW652 - 57” Double Drum Vibratory Roller, *2012 w/106 hrs..............................$82,495SAKAI SW330 - 51” Double Drum Vibratory Roller, *2012 w/150 hrs..............................$32,487SAKAI SW320 - 47” Double Drum Vibratory Roller, *2012 w/very low hours......................$CALLSAKAI SW300 - 40” Double Drum Vibratory Roller, 2009 w/250 hrs................................$24,495SAKAI GW750 - Vibratory Pneumatic Roller, *2011 w/425 hrs ........................................$99,782
*Comes with any remaining standard and 3 year extended power train warranty.
GRADALL XL4100II - ‘04 • Trk Mtd. Exc. w/2 Buckets, 5925 Hrs ....................................$129,950
MILLING MACHINES
ROLLERS
PAVERS / ROAD WIDENERS
EXCAVATORS
Page 12 • February 2, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 2, 2013 • Page 13
Bob Miller636-680-1594
1 Fabick Drive, Fenton, MO 63026www.fabickcat.com
“To Ever Serve Our Customers Better”
USED EQUIPMENT2005 CAT 950G SERIES II
S/N AXX01814, 5,620 Hrs, AC, 4.25 CYDGP ....................................................$150,000
2006 CAT D6N XL
S/N AKM02149, 3,350 Hrs, Cab, AC, AroReady, vpat ..................................$155,000
2008 CAT 928HZ
S/N CXK00407, 640 Hrs, 2.6 CYD GP Bkt,AC..................................................$137,500
2006 CAT D6RXL
S/N GJB00601, 6529 Hrs, A/C, RipperHydraulics, SU Blade, 22” Tracks $175,000
2008 CAT 315DL
S/N CJN00360, 2,317 Hrs, 10’2” Stick, 24”Pads ..............................................$133,500
2007 CAT 272C
S/N RED00560, 742 Hrs, AC, Hydr Cplr,Smooth Bkt, New Tires ..................$46,900
2007 CAT 320DL
S/N PHX350, 3,003 Hrs, Aux Hyds,Coupler, 48” Bkt............................$160,000
2003 CAT D6RXL
S/N AAX00175, 3731 Hrs, A/C, RipperHydraulics, 6SU Blade, Suspension Seat ............................................................$190,000
2006 CAT 315CL
S/N CJC3818 3,405 Hrs, Aux Hyds, 36”Bkt, 24” Pads ..................................$95,000
2004 CAT 980G II
S/N AXG01090, 8619 Hrs, AC, RideControl, Good Tires, GP Bkt........$225,000
2001 TAKEUCHI TW80
S/N E110438, 919 Hrs, 48” Forks, 82” Bkt,AC, Coupler, Ride Control ............$65,700
2008 CAT 928HZ
S/N CXK00529, 1,976 Hrs, AC, 2.9 CYDGP, limited slip front axle ............$137,500
2010 DEERE 333D
S/N 190755 1,022 hrs, ac, hydr. coupler,smooth bkt, 2-spd, 18” track ........$48,500
2008 CAT 320DL
S/N PHX00846, 4,400 Hrs, 42” Bkt,Hydraulic Thumb..........................$149,000
2010 MORBARK 4600XL
400 Hrs, Cat C27 Engine, Auto ReversingFan, Magnetic End Pully..............$575,000
2003 CAT 420D
S/N FDP09264, 5108 Hrs, Cab, E-Stick,Awd Hydrs, Ride Control, 30” Bkt, NewFront Tires ......................................$46,500
Page 14 • February 2, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
3478 5th Ave. S. • Fort Dodge, IA 50501 • (515) 574-2302
4734 Sergeant Rd. • Waterloo, IA 50701 • (319) 234-8710
106 8th St. • Sergeant Bluff, IA 51054 • (712) 943-4470
Mid Country Machinery(800) 206-5936
www.midcountrymachinery.com
2013 Kobelco ED160, EROPS, Blade, New..................$170,000
2012 Kobelco SK350, EROPS, Std Arm, 3 units ........$240,000
2012 Kobelco SK210, EROPS, Aux Hyd, 5 units ........$168,500
2012 Kobelco ED150, EROPS, Aux Hyd, New ............$155,000
2012 Kobelco SK140, EROPS, Heat, Aux Hyd ............$126,500
2012 Kobelco SK170, EROPS, Heat, A/C ....................$145,000
2012 Sany SY215, EROPS, Aux Hyd, 32 Hrs ..............$122,500
2012 Sany SY135C, EROPS, Pattern Changer ..............$89,500
2011 Kobelco SK295, EROPS, Std Arm, 732 Hrs........$179,000
2008 Kobelco SK350, EROPS, Thumb, Heat, 4330 Hrs..............
....................................................................................$123,500
2008 Kobelco SK260, EROPS, A/C, Heat, 2542 Hrs....$108,500
2008 Kobelco SK260LR, EROPS, Long Reach ............$119,000
2007 Kobelco SK350, EROPS, A/C, Heat, 3656 Hrs....$129,500
2007 Kobelco SK210, EROPS, Heat, A/C, 3294 Hrs......$87,500
2007 Kobelco SK135, EROPS, A/C, Heat, 2394 Hrs......$63,500
2006 Kobelco SK330, EROPS, Long Reach, 3925 Hrs$139,500
2006 Kobelco SK160, EROPS, Aux Hyd, Thumb ..........$73,000
2006 Komatsu PC200, EROPS, A/C, Heat, 3745 Hrs ....$96,500
2004 Kobelco SK210, EROPS, A/C, Heat ......................$65,000
2003 Kobelco SK160, EROPS, Thumb, 5306 Hrs..........$56,500
2001 Kobelco SK210, EROPS, Heat, 5460 Hrs..............$55,000
1998 Komatsu PC220, EROPS, Long Reach, 5957 Hrs $55,000
2012 Deere 310SK, EROPS, 4WD, Heat, A/C 8units ........$CALL
2010 Cat 450E, EROPS, 4WD, Aux Hyd, 206 Hrs..........$89,000
2008 Cat 420E, EROPS, 4WD, X-Hoe, 359 Hrs ............$70,000
2008 JCB 4CX, EROPS, 4WD, X-Hoe, 953 Hrs..............$81,000
2008 JCB 3CX, EROPS, 4WD, Aux Hyd, 362 Hrs ..........$63,000
2006 Cat 420E, EROPS, 4WD, X-Hoe, 3163 Hrs ..........$57,500
2005 Deere 310G, EROPS, Heat, A/C, 1978 Hrs ..........$35,000
1996 Cat 416B, EROPS, 4WD, Std Hoe, Heat................$19,000
1996 Cat 416B, EROPS, 4WD, Std Hoe, 6617 Hrs ........$19,000
1990 Ford 655C, EROPS, X-Hoe, Aux Hyd, 5922 Hrs ..$15,000
1989 Deere 410C, EROPS, Std Hoe, Heat ....................$22,000
1987 New Holland 555B, EROPS, Std Hoe, 8028 Hrs ..$15,000
1982 Deere 310AD, EROPS, Std Hoe, 3922 Hrs ............$9,500
2012 Kawasaki 95Z-7, EROPS, A/C,Ride Control........$395,000
2012 Kawasaki 65ZV-2, EROPS, QC, Ride Control ....$155,500
2012 Kawasaki 45ZV-2, EROPS, A/C, QC, 4WD............$71,500
2012 Kawasaki 70TMC-2, EROPS,A/C, Heat ..............$162,500
2012 Kawasaki 90Z-7, EROPS, QC, A/C, Heat ............$295,000
2011 Case 621E, EROPS, QC, A/C, Heat, 18 Hrs ........$139,500
2010 Kawasaki 80ZV-2, Ride Control, 601 Hrs, A/C ..$155,000
2008 Deere 624J, EROPS, QC, 3rd Valve, 5516 Hrs ..$145,000
2007 NH W190B, EROPS, Ride Control, 2667 Hrs ......$109,500
2006 Kawasaki 95ZV, EROPS, A/C, Heat, 5613 Hrs ....$169,500
2003 Komatsu WA180-MC3, EROPS, A/C, Heat............$58,500
1999 Cat 950G, EROPS, Heat, A/C ................................$75,000
1998 Deere 644H, EROPS, Heat, A/C ............................$70,000
1986 Cat IT18, EROPS, QC, A/C, Heat, 9322 Hrs ..........$25,000
1983 Case W20B, EROPS, 4in1 Bucket, 7662 Hrs ........$16,000
2012 Kobelco SK55SR, EROPS, 4 way blade, 4 units ..$64,000
2012 Kobelco SK55SR, OROPS, 4 way blade ..................$CALL
2012 Kobelco SK35SR-5, EROPS, Heat, Aux Hyd............$CALL
2012 Kobelco SK80CS-2, EROPS, Aux Hyd, 310 Hrs....$85,500
2012 Sany SY75, EROPS, Aux Hyd, 2 units ..................$67,500
2009 Kobelco SK35SR-5, EROPS, Aux Hyd, 926 Hrs ..$29,000
2008 Kobelco SK80CS-1, EROPS, Blade, 829 Hrs ........$53,000
2012 Deere 700K LGP, EROPS, A/C, Heat, Topcon ....$179,000
2011 Deere 650J XLT, OROPS, Sweeps, 6 way ............$75,000
2008 Cat D6T LGP, EROPS, A/C, Straight Blade ..........$199,500
2008 Cat D6T XL, EROPS, A/C, SU Blade....................$210,000
2008 Cat D6T XL, EROPS, Sweeps, SU Blade ............$199,000
2008 Cat D6T XW, EROPS, A/C, Heat, SU Blade..........$242,500
2008 Cat D6N LGP, EROPS, A/C, 6way, 3620 Hrs ......$149,000
2008 Cat D6N LGP, EROPS, A/C, Heat, 3109 Hrs ........$149,000
2008 Cat D6T XL, EROPS, A/C, Heat, 4367 Hrs ..........$210,000
2007 Cat D6T XW, EROPS, SU Blade, 3985 Hrs..........$199,000
2007 Cat D6T XL, EROPS, A/C, Heat, 4279Z Hrs ........$189,000
2007 Cat D6K LGP, EROPS, Heat, A/C, Sweeps ..........$124,500
2006 Komatsu D61EX-15, EROPS, 6way, 4931 Hrs ....$105,000
2006 Cat D6N LGP, EROPS, A/C, Heat, 3644 Hrs ........$112,000
2004 Cat D6R XW, EROPS, A/C, Heat, 3829 Hrs ........$170,000
2003 Cat D6R XW, EROPS, 6way, Weighted Hitch ........$98,000
2001 Cat D6R XL, EROPS, SU Blade, Long Track ............$CALL
1987 Cat D6H, OROPS, SU Blade, 24” Shoes ..............$49,000
1998 Cat D6M XL, EROPS, A/C, Heat ............................$63,000
1975 Cat D7G, Open Sweeps, New Undercarriage ........$55,000
1974 Dresser TD15C, OROPS, SU Blade ......................$16,500
2007 Dynapac CA150PD, Single Drum, 129 Hrs ..........$55,000
2006 Bomag BW177PDH, 66” Padfoot, 325 Hrs ..........$44,000
2006 Bomag BW177PDH-3, 66” Padfoot, 100 Hrs ......$46,500
2005 Bomag BW177PDH-3, 66” Padfoot, 766 Hrs ......$39,000
2005 I-R SD100D-TF, OROPS, Single Drum, 659 Hrs ..$57,000
2005 Bomag BW177PDH-3, 66” Padfoot, 667 Hrs ......$41,000
2005 I-R SD70D, OROPS, 66” Smooth drum, 1300 Hrs$43,000
2004 I-R SD70D, OROPS, 66” Smooth drum, 2396 Hrs$35,000
2004 HyPac C832C, OROPS, 68” Padfoot, 1207 Hrs ....$33,500
1989 Dynapac CA15PDB, OROPS, Blade, 4144 Hrs......$18,500
EXCAVATORS
LOADER / BACKHOES
WHEEL LOADERS
MINI EXCAVATORS
CRAWLER TRACTORS
COMPACTORS
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 2, 2013 • Page 15
JD 800CLC, 14' 5" Arm,36" Pads, #N4385 ..............................$450,000
JD 600CLC w/ GenesisGXP1200R Shear,#U10798 ........$500,000
NPK Hammers, AllSizes for All Makes.Inspected and WellMaintained, GH4-GH18
JD 770D, Tall Cab, 12’ Blade, Warranty,#U11496 ........$152,000
JD 850J, 24” Pads,128” Blade, #U11325 ..........................$184,000
Fiat 65E, 110HP, BladePitch, 252 Hrs, #A7104......................$108,000
JD 330CLC, 60’ SuperLong Front, #U10682 ..........................$129,000
JD 9520 ScraperSpecial, #U10292 ..............................$129,000
JD 310SG, #N4288,Cab, Air, Aux Hyd ..................................$48,000
Bomag BW180AD, 71"Drum, #A4597 ......................................$38,000
JD 750J LGP, 156”Blade, #U11482 ..................................$175,000
JD 450DLC, 12’10”Arm, 36” Pads, CWRD,#U11280 ........$355,000
JD 400D, New KLEIN8000 gallon water truck,6234 hrs, #U11425..............................$268,000
JD 544J, Cab, Air, GPBkt, #U11303..$106,000
JD 700J, LGP, 30” Pads,132” Blade, Winch,#U11492 ........$179,000
Page 16 • February 2, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Associated Equipment Distributors Hold Annual Show
John Gaughan (L) and Eric Briese, both of TVHParts Co., Olathe, Kan. TVH, well known in theforklift industry, is now entering the construc-tion industry.
Displaying the Magnum MS-4 HFB are David Hughes (L),Magnum Attachments, Etobicoke, Ontario; and Tom Bottrell,company president.
(L-R): Bruce Bunting, Knapheide Manufacturing,Quincy, Ill., discusses service trucks with Rick Smith,Tractor & Equipment Co.; and Haily Meyer, KnapheideManufacturing.
(L-R): Bobby Hudson and Robbie Hegwood, both ofHydrauliCircuit Technology Inc., answer questionsfrom David Mehrtens, RoadBuilders Machinery andSupply Co. Inc.
Tom Collins (C), Anderson Equipment Co., stops by to see the latest from StricklandManufacturing. Representing Strickland are Mick Crimmins (L), and Sean O’Reilly.
Barry Stoughton (R), president, BLS Enterprises,shows his track pads to Bill Lyon (L) and Rick Albert,president, Rick Albert Machinery, Pleasanton, Calif.
(L-R): The father and son team of Bryan and PhilMcCoy, RoadBuilders Machinery and Supply Co. Inc.,visit the IronPlanet booth and speak with CarsonErickson, sales manager, IronPlanet.
The annual Associated Equipment Distributors (AED)Summit and CONDEX show was held Jan. 14 to 17 inLas Vegas.
Keynote speakers John Hofmeister, founder and CEO ofCitizens for Affordable Energy; Fox News Channel’s Stuart
Varney; and Eli Lustgarten, senior vice president ofLongbow Securities and president of ESL Consultantsaddressed attendees and dealer and manufacturer representa-tives manned the booths on all days of the event.
Woods Equipment Co., headquartered in Oregon, Ill., had its new Woods variablecoupler on display, which drew a lot of traffic to the booth. (L-R) are Don Kemp,MinnPar, Mounds View, Minn.; Jerry Johnson and Doreen Putnam, WoodsEquipment Co.; and Bill Grundy, Avant Tecno USA, Elk Grove Village, Ill.
see AED page 22
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 2, 2013 • Page 17
CASE 430-3 RUBBER TIRE SKID STEER, 77HP, Canopy, 2-Speed Ground Drive, GP Bkt,Very Good 12-16.5 Tires, VERY LOW HOURS..............................................................$21,500
2011 JAGUAR XK 2 DOOR CONVERTIBLE 5.0LV-8 GAS, Automatic, Ultimate Black Exterior,Charcoal Gray Leather Interior, Heated/CooledFront Seats. Loaded! ONLY 4,300 Miles $62,500
CAT D6R XL HYDRAULIC DOZER W/TILT, 175HP, Cab w/Heat & AC, Powershift w/DifferentialControl, Fingertip Autoshift, Good U/C w/30”Pads ....................................................$92,500
FIAT ALLIS FG65C TANDEM DRIVE ARTICU-LATED MOTOR GRADER, 80 HP, Canopy, 6F-3R Powershift, 10’ Moldboard w/Sideshift &Tilt, Very Good Tires ..........................$32,500
CAT 315CL 1.13-YARD HYDRAULIC EXCAVA-TOR, 99 HP, Cab w/Heat & A/C, 10’6” Stick,48” Bkt, Hydraulic D/C, VG UC w/28” Pads ..................................................................$75,500
CAT D8H HYDRAULIC SU DOZER W/TILT, 270HP, Canopy, Powershift, Direct Start, EngineEnclosures, Auxiliary Hydraulic Valve, Good UCw/ 24" Pads ........................................$26,000
2001 FORD F550 XL SUPER DUTY DUMPTRUCK, 7.3 V-8 Diesel, AC, Automatic, 9’ DumpBox, Behind Cab & Side Tool Boxes ....$15,500
CAT D6H SERIES II HYDRAULIC STRAIGHTDOZER W/TILT, 165 HP, New Cab w/Heat & AC,Engine Enclosures, Powershift, DifferentialSteer, VG UC w/24” Pads ....................$77,500
CAT D6M XL HYDRAULIC 6-WAY DOZER, 140HP, NEW Cab w/ Heat & AC, FTC Powershiftand Steering, Drawbar, Good UC w/ 24" Pads ..............................................................$60,000
CASE 580 SUPER M 4x4 1-YARD LOADERBACKHOE, 73 HP, Canopy, Extendahoe,General Purpose Front Bkt, 36” Hoe Bucketw/Teeth, Good Tires ............................$32,500
2003 DIERZEN DOMINATOR 22’ TANDEM AXLEQUARTER FRAME END DUMP, Dual FunctionTail Gate, Manual Tarp, Aluminum Budd Wheels,Spring Suspension................................$24,500
CAT 950G 4-1/2 YARD ARTICULATED 4WDLOADER, 180 HP, Cab w/Heat & AC, ECPCTransmission, GP Bkt, Good Tires ......$72,500
CAT D3G XL HYDRAULIC 6-WAY DOZER, 77 HP,Canopy, Hydrostatic Transmission, JoystickControls, Very Good Undercarriage w/16” Pads..................................................................$37,500
CAT 938F 3-1/4 YARD 4 WHEEL DRIVELOADER, 140 HP, Cab w/Heat & A/C,Powershift Autoshift, GP Bkt, Ride Control,Good Tires ..........................................$57,500
CAT 950F II ARTICULATED 4-YARD 4 WHEELDRIVE LOADER, 170 HP, Cab w/ Heat & AC,REBUILT Powershift Transmission, GP Bucket,VG ......................................................$62,000
CONTACT815-968-0818
www.adamsequipment.com
For our full inventory, please visit www.adamsequipment.com
CAT 330CL 2-3/4 YARD HYDRAULIC EXCAVA-TOR, 247 HP, Cab w/Heat & A/C, 12’9” Stick,74” Ditching Bucket, VG UC w/34” Pads ....................................................................$102,000
Page 18 • February 2, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Contact us today.
You asked. We delivered. Our D-Series Skid Steers are loaded with customer-recommended enhancements, like larger operator stations, quietpressurized cabs with best-in-class visibility, and curved-glass swing-out doors. D-Series innovations include an exclusive cooling system with available hydraulically driven variable-speed fan that reverses to clear core-clogging buildup. Plus options such as electrohydraulic joysticks, variable boom and bucket speed settings, and more than 100 attachments to let you take on more tasks. Packed full of best-in-class productivity and uptime-enhancing features, the D-Series are destined to become owner and operator favorites. Ask for a demo today.
RDO Equipment Co.Burnsville, MN
Matt Dull952-890-8880
The difference is in the D-tails.
1.9% for 12 Months
Expires 4/30/13
Offer ends 01/31/2013. Some restrictions apply; other special rates and terms may be available, so see your dealer for details and other financing options. Subject to approved credit with John Deere Financial.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 2, 2013 • Page 19
(262) 781-3770
SEE PHOTOS OF OUR COMPLETE INVENTORY AT WWW.ARINGEQUIPMENT.COM13001 W. Silver Spring Drive
Butler, WI 53007
Jim KingMobile: (414) 530-0592
Fax: (262) 781-5053Email: [email protected]
WE ALSO HAVE AGGREGATE EQUIPMENT. PLEASE CALL DENNY KREUSER (608) 386-8480 FOR MORE INFO.
2005 Volvo L220E, Cab, A/C, Radio, AdditionalWork Lights, Return to Dig, Boom Suspension,Engine Block Heater, 7cy Bucket w/BOE,29.5R25 Tires, Recent Transmission..$89,500
2003 Volvo EC360B LC - 12' 10"' ARM;AC; RADIO; 36" PADS; 70% UC; 54" P/OBUCKET; PILOT PATTERN CONTROLCHANGE ..................................$103,500
2009 Volvo ECR145CL - A/C, Radiow/CD, 24" Pads, 8'2" Stick,Hammer/Shear Piping, Q/C Piping, PilotPattern Control Changer............$112,000
2007 Volvo L90F - Cab, A/C, Radio w/CD, AirSuspension Seat, Work Lights, Boom Suspension,Hydraulic Attachment Bracket, Reversible CoolingFan, Rotating Beacon, Foot Step w/LockableToolbox, Rear Light Guards, Rear Cover Plate, 3.5cyBkt w/BOE, 20.5R25 Michelin XHA Tires ........$CALL
2008 Volvo L220F - 10,700 Hrs, Cab, A/C, Radiow/CD, Boom Suspension, Eng. Block Heater, LoggingCWT, 8cy Bkt w/BOE, 29.5R25 Tires ..........$185,000
2004 Volvo A40D - AC, CONTRONICS,29.5-25 TIRES, TAILGATE ..........$CALL
2008 Volvo DD24 - Dual 47” Drums w/UrethaneWipers, ROPS, Sliding Seat w/Dual Lever Control,Hydrostatic Drive, Work Lights, Rotating Beacon,Offset Articulation Joint, 68 Gallon Pressurized WaterSystem w/4 Nozzles Per Drum, Loading/UnloadingTraction Control, (NEW) 3 Cylinder Cummins Engine(32HP), Operating Weight 5,725 lbs ..............$18,500
2005 Volvo L150E, 9400 Hrs, Cab, A/C, Radio, WorkLights, Rotating Beacon, Boom Suspension, Return toDig, 5.25cy Bkt w/BOE, 26.5R25 Tires, New Engine........................................................................$137,000
2009 Volvo L120F - Cab, A/C, Radio w/CD,Heated Suspension Seat, Boom Suspension, HydAttachment Bracket, Reversible Cooling Fan, WorkLights, Reverse Alarm, Front Frame Steps, RearFenders w/Guard Rails, 113” 4.4cy H/O STE Bucketw/BOE, 23.5R25 Tires ............................$185,000
2008 Volvo L70F - Cab, A/C, Radio w/CD,Front Work Lights, Boom Suspension, 3rd Function,Hydraulic Attachment Bracket, Reversible CoolingFan, Front Frame Footsteps, Right Hand Side Stepsw/Lockable Toolbox, Engine Block Heater, DymaxHydraulic Q/C, Dymax 4cy High Tip Bucket w/BOE,20.5R25 Goodyear RL-2+ Tires 50% ......$103,000
2011 Volvo A40F – 1262 Hrs, Volvo D16H(476hp) Tier 4i Engine, Heated Air Suspension Seatw/Armrest, Front Work Lights, Rear View ColorCamera, Electric Hood Opener, Delayed EngineShutdown, Engine Block Heater, CareTrack TelematicsSystem, 29.5R25 Michelin XADN Tires....$450,000
2012 Volvo L90G, Cab, A/C, Radio w/CD, Heated Operator'sSeat w/Left Hand Armrest, Forward View Mirror, Rear Cameraw/Color LCD Monitor, Sliding Window Operator's Door,Additional Work Lights Front/Rear, Boom Suspension, 3rdHydraulic Function, Hydraulic Attachment Bracket, ReversibleCooling Fan, Reverse Alarm, Rotating Warning Beacon, RearFrame Cover Plates, Rear Belly Guard, Front Frame Footsteps,Full Rear Fenders, CareTrack Satellite System w/3yrSubscription, 104" 3.5cy Bucket w/BOE, 20.5R25 BridgestoneVJT L-3 Tires, Volvo D6H (Tier 4i) Engine ....................$CALL
2012 Volvo L70G, Cab, A/C, Radio w/CD, Heated AirSuspension Operator's Seat w/Left Hand Armrest, RearCamera w/Color LCD Monitor, Sliding Window Operator's Door,Work Lights, Boom Suspension, 3rd/4th Hydraulic Functions,Hydraulic Attachment Bracket, Reversible Cooling Fan, EngineBlock Heater, Reverse Alarm, Rear Frame Cover Plates, FrontFrame Footsteps, Logging Counterweight, CareTrack SatelliteSystem w/3yr Subscription, 100" 3.1cy Bucket w/BOE, 20.5R25Michelin XHA2 L-3 Tires, Volvo D6H (Tier 4i) Engine....$CALL
2009 Volvo ECR88, 1100 Hrs, Cab, A/C, Radio,Suspension Seat, Anti-Theft System, Work LightsFront/Rear, 18” Rubber Tracks, 83” Stick, 140” OffsetBoom, Joystick Pattern Selector Valve, Pilot Controls,Q/C Piping, Auxiliary Hydraulics, Automatic 2 SpeedTravel, Leveling Blade, Optional (882lb) Counterweight........................................................................$88,500
1999 Volvo L90C, Cab, Heater, Contronics, Radio,Single Lever Control, F/R Switch, Front Work Lights,Boom Suspension, 3rd Function, HydraulicAttachment Bracket, 3.4cy Bkt w/Teeth, 20.5R25Tires 35%........................................................$60,000
2005 Volvo L70E - Cab, A/C, Contronics,Hyd Attachment Bracket, 20.5R25 Tires,2.5CY Bucket w/BOE ................$108,500
Page 20 • February 2, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Allis-Chalmers Forest Green HD21 Dozer/Ripper, 1:50
Scale......................................................................................$90
Allis-Chalmers Orange HD21 Dozer/Ripper, 1:50 Scale $90
Allis-Chalmers Yellow HD21 Dozer/Ripper, 1:50 Scale ..$90
Bantam C-35 Crawler Shovel, 1:50 Scale ......................$70
Bantam Truck Mounted Crane, 1:50 Scale ..................$125
Bantam Truck Mounted Shovel, 1:50 Scale ....................$60
Bobcat A300 Skid Steer Loader, 1:25 Scale ..................$40
Bobcat E35 Compact Excavator, 1:25 Scale ................$60
Bobcat M200 Gold Skid Steer Loader, 1:25 Scale ........$30
Bobcat M400 Gold 50th Anniversary Skid Steer Loader,
1:25 Scale..........................................................................$25
Bobcat M610 Golden 50th Anniversary Skid Steer
Loader ..............................................................................$25
Bobcat S175 Skid Steer Loader, 1:25 Scale ..................$45
Bobcat S205 Skid Steer Loader & Pick-Up Truck/Trailer
Set, 1:50 Scale ..................................................................$65
Bobcat 743 Skid Steer Loader, 1:25 Scale ....................$40
Bobcat 773 50th Anniversary Skid Steer Loader, 1:25
Scale..................................................................................$25
Case 580N Super N Backhoe/Loader, 1:50 Scale ........$50
Caterpillar AP655D Asphalt Paver, W/O Canopy, 1:50
Scale..................................................................................$85
Caterpillar Military D8R Track-Type Tractor, 1:50 Scale$65
Caterpillar D6K Track-Type Tractor................................$60
Caterpillar D8T Track-Type Tractor, 1:50 Scale ..........$110
Caterpillar D10T Track-Type Tractor, 1:50 Scale ........$105
Caterpillar D11R Track-Type Tractor, 1:50 Scale ..........$90
Caterpillar 226B3 Skid Steer Loader, 1:32 Scale ..........$50
Caterpillar 247B3 Multi-Terrain Track Loader, 1:32 Scale ..
..........................................................................................$50
Caterpillar 432E Backhoe/Loader, 1:50 Scale ..............$75
Caterpillar 906H Compact Loader, 1:50 Scale ..............$40
Caterpillar Military 924H Versalink Loader in Desert
Camouflage, 1:50 Scale ..................................................$45
Caterpillar 963D Track Loader, 1:50 Scale ....................$60
Caterpillar 977 Traxcavator, 1:50 Scale..........................$55
Doosan Moxy MT31 Articulated Truck ........................$115
Hamm GRW280 Compactor w/Cabin ............................$80
Hitachi EH700 Off-Highway Truck, 1:50 Scale ..............$40
International "S" Series Dump Truck,1:25 Scale ........$125
International TD-15 Dozer, 1:50 Scale ............................$65
International TD-20E Dozer, 1:64 Scale..........................$24
International TD-25 Dozer, 1:50 Scale ............................$70
John Deere 400D Articulated Truck, 1:50 Scale............$50
John Deere 624K Wheel Loader, 1:50 Scale..................$45
John Deere 850K Dozer ..................................................$60
John Deere 872 GP Grader, 1:50 Scale ..........................$60
Komatsu 475A Dozer, 1:50 Scale..................................$145
Komatsu D51 PX Dozer, 1:50 Scale................................$85
Komatsu D51 EX Dozer, 1:50 Scale................................$85
Komatsu D375 Dozer, 1:50 Scale..................................$110
Komatsu HD605 Off-Highway Truck, 1:50 Scale ..........$90
Komatsu HM250 Articulated Truck, 1:50 Scale ............$80
Komatsu PC14R Mini-Excavator, 1:32 Scale ................$50
Komatsu PC200 Excavator, 1:50 Scale ........................$105
Komatsu PC350 LC Excavator, 1:50 Scale ....................$90
Komatsu PC360LC-10 Excavator, 1:50 Scale ................$95
Komatsu PC400 LC Excavator, 1:50 Scale ....................$95
Komatsu PC2000-8 Front Shovel, 1:50 Scale..............$260
Komatsu SK1020 Skid Steer Loader, 1:25 Scale ..........$40
Komatsu SK1026 Skid Steer Loader, 1:25 Scale ..........$40
Komatsu WA500 Wheel Loader, 1:50 Scale ..................$95
Komatsu Mack Granite MP w/Lowboy Trailer, 1:50 Scale ..
........................................................................................$100
Link-Belt 800 X2 Excavator,1:50 Scale ........................$200
Link-Belt 80100 Rough Terrain Crane..........................$200
Mack Granite MP w/ Bottom Dump Trailer ....................$95
Mack R Model Mixer Truck, Patriotic Detailing, 1:34 Scale ..
..........................................................................................$95
Northwest 25-D Shovel, 1:50 Scale ................................$75
Peterbilt 367 Dump Truck w/ Beavertail Trailer, 1:50 Scale
........................................................................................$100
Terex AC 100/4 All Terrain Crane, 1:50 Scale ..............$190
Volvo EC460 L Excavator, 1:50 Scale ..........................$150
Volvo SD-122 Soil Compactor, 1:72 Scale ....................$25
All New in Box
CALL Toll Free
800-523-2200Ext. 197
Collections Wanted, I Buy Collections Shipping and Handling Included
Contact – Barry McKeon800-523-2200 Ext. 197 • 610-506-5961 Cell
Email – [email protected]
CEG Scale Models470 Maryland Drive
Fort Washington, PA 19034Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.
Caterpillar 980G Wheel Loader on a Kenworth W900 and Trailking Trailer, 1:50 Scale...$150 Hamm 3307 Compact Roller, 1:34 Scale...$60
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 2, 2013 • Page 21
1995 Komatsu PC250LC-6; #91777, Aux Hyd,Mech Thumb, 31.5” Tracks, 10,000 hrs$49,500
2003 Komatsu WA180-3; #91673, Cab/AC,Ride Control, QC/Bucket, 8,800 hrs ......$47,500
2001 Komatsu WA380-3; #81866, Cab/AC,Ride Control, QC/BKT/Forks, 8,300 hrs $79,500
1996 Komatsu WA250-1; #91810, Cab/AC, GPBucket, 20.5-25 Tires ............................$34,500
1994 Komatsu PC200LC-6; #91806, Cab/AC, 9’6” Arm, 31.5” Tracks, 6,800 hrs ..........$47,500
2003 Caterpillar D6N LGP; #91804, Cab/AC,Good U/C, Trimble System....................$98,500
2003 Caterpillar D6R XL II; #91695, Cab,Sweeps, 26” Tracks, 14,500 hrs ........$104,500
2002 Caterpillar 769D; #81825, Cab/AC,18:00-33 Tires, Approx 10,000 hrs ....$269,500
2001 Caterpillar 730; #91650, Cab/AC, 23.5-25Tires, 12,400 Hrs ..................................$99,500
2002 Komatsu PC300LC-6; #91646, Cab/AC, 13’Arm, QC, 33.5” Tracks, 10,650 hrs ......$76,500
2001 Komatsu WA180PT-3; #91793, Cab/AC,GP Bucket, 17.5-25 Tires, 9,450 hrs ....$34,500
2006 Komatsu WA600-3; #81553, Cab/AC,Ride Control, 8 yd BKT, 3,400 hrs ......$399,500
Call Doug / Sam:(866) 485-7180
Page 22 • February 2, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Fox News’ Stuart Varney Addresses AED Members at Show
Allied has long been an industry leader in the manu-facturing of hydraulic hammers. (L-R) are Greg Smith,Allied; Cindy and Dale Leppo, Leppo Rentals/Bobcat inAkron, Ohio.
EDA packages knowledge with data to give equipmentdistributors the competitive edge.
ITR America, Hobart, Ind., was well staffed (L-R) by Larry Gray, Joshua Timm,Larry Kinn and Jamie Dunn.
Talking street sweepers are Rick Thompson (L), Van-Ed Equipment, Surrey, BC, Canada; and Frank Chulick,president, Stewart-Amos Equipment, Harrisburg, Pa.
Jeff Abele (L), Abele Tractor, Albany, N.Y., proudlyworks with Joe Tedesco, Gorilla Hammers, Randolph,Mass., to supply his customers with high-quality ham-mers that are priced right.
(L-R): Duane Neumann, Roadwidener, Oconomowoc, Wis., and Devin Wolf, presi-dent, Roadwidener, show the company’s products toSoutheastern Equipment Co.’s Paul Bell and MickleyGourley.
Manning the Tag Manufacturing Inc. booth (L-R) areGeorge Hedges, John Creswell, Fred Caddell Jr., andGary Wilt.
Bagela is quickly becoming the recognized leader ofasphalt recycling equipment in North America.Representing the company are Bagela’s Dan Kovalick(L) and Greg Harla.
see AED page 80AED from page 16
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 2, 2013 • Page 23
SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL
• No tools required• No expensive
hardware needed• No more rags
stuffed into hoses• No more messy
plastic caps• The ultimate
contamination control tool• One hand installation• Eliminate hydraulic
oil spills & clean up• Quick installation
& ease of usage• Safe for personnel
& environment• Industry acclaimed• 100% Made in USA
For more information contact Mike Pearl at914.980.8890 or email mike @ flangelock.comwww.flangelock.com
We Can Help You Reduce Your Risk of
Equipment Theft
Visit us at the following conferences to learn more:
World of ConcreteLas Vegas Expo CenterLas Vegas, NevadaFebruary 5-8, 2013Booth # C4023
For more information:call 1-866-663-7872 or visit www.ner.net© Verisk Crime Analytics, Inc., 2013. All rights reserved. NER is a division of Verisk Crime Analytics, Inc. HELPtech, IRONcheck, NER, and the NER logo are registered trademarks and IRONwatch is a trademark of Verisk Crime Analytics, Inc.
The Rental ShowSands Expo & Convention CenterLas Vegas, NevadaFebruary 10-13, 2013Booth # 2630
Over a billion dollars worth of construction equipment is stolen in the United States each year.
Since 2001, NER has helped equipment owners manage equipment risk throughHELPtech, a equipment marking andregistration program, IRONcheck, a machine-history search for usedequipment, and IRONwatch, ano-monthly-fee GPS trackingand recovery device.
e Can Help YW
educe Y R Y Y
Risk ofeduce Y
Equipment Te Can Help YW
owners manage equipment risk throughSince 2001, NER has helped equipment
is stolen in the United States each yearOver a billion dollars worth of construction equipment
pment Teduce You R p Y You R
pment risk t s helped equ
d States eac worth of con
heft TRisk ofour Y Your
egas Expo CenterLas Vorld of ConcreteW
isit us at the follow VVisit us at the following confereand recovery device.no-monthly-fee GPS trackingequipment, and IRONwatch, aa machine-history search for usedregistration program, IRONcheck, HELPtech, a equipment marking and
egas Expo Center
wing confer
no-monthly-fee GPS trackingequipment, and IRONwatch, a arch for use
IRONcheck ent marking
Sands Expo & Convention CenterThe Rental Show
Sands Expo & Convention CenterThe Rental Show
Booth # C4023February 5-8, 2013
egas, NevadaLas Vegas Expo CenterLas V
NER, and the NER logo are registered trademarks and IRONwatch is a trademark of V© V
call For more information:
egas Expo Center
Booth # 2630February 10-13, 2013
egas, NevadaLas VSands Expo & Convention Center
NER, and the NER logo are registered trademarks and IRONwatch is a trademark of VAll rights reserved. NER is a division of VAnalytics, Inc., 2013. erisk Crime © V
or visit 1-866-663-7872call For more information:
February 10-13, 2013egas, Nevada
Sands Expo & Convention Center
Analytics, Inc.erisk Crime NER, and the NER logo are registered trademarks and IRONwatch is a trademark of VAnalytics, Inc. HELPtech, IRONcheck, erisk Crime All rights reserved. NER is a division of V
.net.nerr.netwww or visit
Page 24 • February 2, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Visit www.sealsaver.comfor more information or contact us at
1-800-683-5189
Exclusively manufactured by:
Fluid ControlServices, Inc.1155 Allgood Road • Suite 15
Marietta, GA 30062
1-800-683-5189Fax: 770-509-5832
SEAL SAVER has proven effective inConstruction, Mining, Waste Management,Quarries, Refineries, Marinas, Recycling,Wood Products Processing, Steel Mills
and Hot Slag Industries.
SatisfactionGuaranteed!
SEAL SAVER PROTECTIVECYLINDER COVER
KOMATSUD65EX-15
STOP the never ending cycle of cylinder repairs.
Made inthe USA
The SEAL SAVER WILL:Protect cylinders from the elements • Eliminate dings and dents from fallingdebris • Reduce particle contamination of hydraulic systems • Prevent pitting due to chemical washes • Extend the lifeof cylinder seals • Eliminate rod scoring
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 2, 2013 • Page 25
WWW.RUDDEQUIPMENT.COM
1-877-DIG-RUDD
Rudd offers quality used equipment. Please contact Marcela Newman, International Sales Representative, or
Albert Medcalf, General Manager, Used Equipment and Parts, for more information.
Because the only pit you should be in is the one you’re digging.
Albert MedcalfOffi ce (502) 456-4050Cell (502) 592-6510
Marcela NewmanOffi ce (502) 456-0256Cell (502) 643-1829
Page 26 • February 2, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
STOPS FUEL GELLINGNEW: The Universal Filter Preheater is designed for diesel fuel filter housings, for lube oil and hydraulic filters too (specify hyd. size). It wrapsaround the filter housing and reduces or eliminates the possibility of coldweather fuel gelling stopping the engine. It is easily removable and transferable and is wired for your choice of: direct current or alternatingcurrent or a convertible model combining dc and ac. A standard 12V or 24VUniversal Fuel Filter Preheater is priced at $138.
The ‘peel & stick’ Universal Preheater attaches to thebottom or the side of the oil pan and converts the housinginto a heat transfer element. It warms the oil withoutburning it making cold starts easy. It can be used ongearboxes, transmissions, transfer cases, water tanksand even bulk oil tanks. The Preheater plugs into any120 or 240 volt outlet and consists of a thin siliconefiberglass pad containing a metal grid. To install it, youclean an area on the bottom or side of the oil pan and press the pad onto it, then use silicone toseal the edges of the pad and place a flexible ceramic insulation pad over it. It is available inseveral models depending on the lube capacity. A 50 watt unit sells for $42 and a 350 watt unitsells for $133.
2003 Cat D8R II, S/N 06YZ01126, 8130 hrs,e/rops, a/c, heat, w/ multi-shank ripper, 8sublade, reman trans in 2011................$262,000
2005 Komatsu PC400 LC7, S/N 0A86676,6601 hrs, a/c, heat, u/c 65%, 2 available ..............................................................$159,000 EA.
2006 Cat 330DL, S/N PMWP00369, 5240 hrs,a/c, heat, pattern changer ..................$139,000
2006 Case CX240, S/N 46509315, 5083 hrs,a/c, heat, GPS machine, control ready ..........................................................................$89,000
FALL EQUIPMENT SALE2003 Cat 420D IT, 5082 hrs, 4WD, a/c, heat, extendahoe, Stk #465 ......................................................................$39,0002005 Cat D8T, 8115 hrs, e/rops, a/c, u/c 60%, 3rd valve, Stk #541 ....................................................................$289,0002005 Cat 320C LU, 3882 hrs, heat, a/c, u/c 65%, zero tail swing, Stk #437 ............................................................$90,0002005 Cat D6NXL, 6448 hrs, e/rops, new u/c, a/c, heat, GPS, Stk #399 ....................................................................$125,0001998 Cat 613C II, 11 yd scraper, 2706 hrs, heat, a/c, e/rops, 70% rubber ..................................................................$59,0002004 Cat 325CL, 4700 hrs, u/c 60%, a/c, heat, aux hydraulics,Stk #369 ....................................................................$107,0002004 Deere 450CLC, 6156 hrs, a/c, heat, thumb, u/c 85%, Stk #497 ....................................................................$127,0002005 Terex TA27-G7, 4769 hrs, rubber 50%, heat, a/c, 2 Available ..............................................................$99,000 EA.1986 Cat 613, Water wagon, 1945 hrs, cab, air operated watercannon, Stk #548..........................................................$29,0002010 LaBounty 200r, 500 hrs, 3rd member hydraulic process-ing shear ......................................................................$99,000
PHONE
(812) 282-2800 KENNY ACTON
(502) 639-4168
Ask about our GPS Machine Control Equipped Dozers,Graders & Excavators www.JobRentals.com
(812) 282-2882 FAX6104 Sable Mill Court, Jeffersonville, IN 47130
SmartEquip Founder SchuesslerLeads European ExpansionSmartEquip founder and executive vice
chairman, Alexander Schuessler will serveas president of the company’s newlyformed international group. During the ini-tial phase, Schuessler will lead the compa-ny’s expansion into Europe.SmartEquip currently provides the
North American rental industry with atechnology platform, connecting equip-ment manufacturers and dealers electroni-cally with large fleet owners, to provideboth real-time product support and elec-tronic procurement capabilities. Users ofSmartEquip’s e-FleetPro technology havedocumented dramatic operational efficien-cy improvements, as well as reducedequipment owning and operating costs.The SmartEquip Network in NorthAmerica presently supports more than 100suppliers and is used by approximately40,000 users across 4,000 rental, dealerand other equipment locations.“Europe has long represented a natural
expansion of our market. Today, we sup-port many European, U.S.- based, andother international manufacturers in NorthAmerica, and they have long urged us to
support their customers, dealers, and dis-tributors on a broad global basis,” notedSchuessler. “Similarly, over the past eight-een months, we have worked with numer-ous European rental companies and globalcontractors, who have carefully studied theuse of the SmartEquip Network in NorthAmerica and are ready to implement thetechnology in their business. We are excit-ed about the partnerships we have nowstarted to build in Europe, and I am per-sonally pleased to oversee this very impor-tant aspect of our company’s growth.”Schuessler served as the company’s
founding CEO from 2000 to 2011. Prior tofounding SmartEquip, Schuessler was aco-founder of Script International — acompany that drove Caterpillar’s entry intothe equipment rental business across SouthAmerica. In the mid-1990s, he was a pro-fessor at New York University, where healso served as the director of the PoliticsData Center, a research he designed andfounded. He published an influential bookas well as several articles on advanced sta-tistical methods, published by the U.S.National Academy of Science.
ASA-Midwest Council Donates400 lbs. of Food to Local Charity
Members of St. Louis-based American Subcontractors Association (ASA) MidwestCouncil and their families recently donated 400 pounds of food, plus $300 to the St.Louis Area Food Bank. The donations were collected at the association’s annualCasino Night holiday party on Dec. 19. The donation will help to provide more than1,400 meals to the St. Louis area’s needy. (L-R) are Robert Trask, ASA-MidwestCouncil secretary; Susan Winkelmann, ASA-Midwest Council executive director;Steve Giacin, ASA-Midwest Council president; Vince Irwin, ASA-Midwest Council vice-president.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 2, 2013 • Page 27
90
29
80
NORTH DAKOTAMINNESOTA
SOUTH DAKOTA
NEBRASKA
IOWADavenport
Clear Lake
Des Moines
Sioux City
Sioux Falls
Twin Cities
Aberdeen (HC Clark Imp)
94
94
WISCONSIN
LaCrosse
Shakopee Rosemount
Duluth
Grand Island
KearneyLexington
Tri-StateEquipment
North Platte
CenterPoint
Rogers
39
39
Grand ForksCrookston
Omaha
Lincoln
Rapid City
FargoFargo Tractor
Marshall
BismarckDickinson
MinotWilliston
Albert Lea
15
90
80
25
WYOMING
MONTANA
Missoula
Great Falls
Titan Rentals Billings
Titan Rentals Helena
Billings
Gillette
Casper
Cheyenne
Bozeman
Big Sky
Mandan (Twin City Imp)
Aberdeen
76
70
COLORADOFort Collins
Denver
Colorado SpringsCASE CE NEW HOLLAND CE
BETTER RENTBETTER RENTFrom the Region’
MallsGrea
MONTMO
issoula
MM
MM
15 MONTANAGre
M
Great F
AL SOLBETTER RENTs Largest Cons n’
TAT
illistonWMM
TH TATAOR TATAN NOR NOR ORT ORT OOOKOKODinoti
DAD
WWiMMMANANAANNANAANAN
AL SOL struction Equipment Dealer Network.
nMINN
nTATATATT
CrookstoCrookstoo
D l th
NESONNESONESOnCrookstoC ooC ooksto
ssrkkkFoGrand
UTIONS.AL SOL ent Dealer Network.
UTIONS.s Largest Construction Equipment Dealer Network.
e
issoulaMM
itan Ren s Helena e
s
entals He en s He
BBB
enta Re e itan R Re enta enta yg S
enta enta Big Big
MI GGGWWW OMW OMOMMINGMI G
90
WYYY
M
Billi gBillingTB gssBBillinggg
T
g SBig Sk
Bozeman
kkinsonDickc
Mand ndan
HC Clark Imp)Aberdeen (HC Clark Imp) Clark Imp) Clark Imp) (HC (H C Clark Imp) C Clark Imp) Clark Imp)
yapid City y
KS S UTH UTH TAKKDADA
E AENEEEBRASK
KODASOUTH OUTH OUTH
R
k kBismarckk
d win City Imp)d
gs
M M
l llings i gs l ls Bill l Bill lings llings
e
Casper
ennen80
25
Gillett
Cheye
(TTwin City Imp)dan
tounun
r uth
s
urr orr Duluth
t t e t
p) p) p) AberdeenA deed eeeeRR
A enA e
in n
p) p)
ss C CT sn n
emoumouseeRosemounR semoun
MMa
RRShakopep
allsSio allsallsSio Sio
rshallrsh lMaMa
Albee at t erer
Equipmen
aalalllslls
City
Clear L Lake L ake aEquipmenEquipmen
t t
PP
Sioux CitySioux City ty ty
to
y y
OmaO aD Des Moineses Moinese
OOOO hhaaahaaha
90
29
80
o
n Citie e eTwTwTw
R
RoRogersRo
Sioux Fux Fux FSioux FSioux F
mm tm
A
EquipmenEquipmen
e hahaaa
94
u
oinPPPnntntentntCee
O aha
mentatei-StateTr
pe un
WISC
peepe
er
hr hMarsh
FFtoacTrrgo Fa rgFa
Let r
n
LaCrosse
t
rosse
CC
94
er
ONSINSC
39
39
RADOLLOCOO
y
th Platte
Kearneyyxington
KeKegggtog onox
Nor
LeLeLe
Cheyeenennen
RADO
olorado Springso
RADOOO 76
70
o Springs ringsC
verD nvDeDe
ollins CrtFo
venvenD vv
G G
maO aOO
Island
DavenporD venporDD
WWA
hhaa
d d Grand G d olLincoo IOIOWAWAoondI l nddd WAIOIOIOOOI l d lnl
G d
O ahattnpornpor
Page 28 • February 2, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Prices for construction materials incheddown in December, closing out a year of rel-atively subdued changes in both materialscosts and bid prices, according to an analy-sis of new federal figures released Jan. 15 bythe Associated General Contractors ofAmerica. Association officials said the pricedecline was likely to be temporary, notingthat the vast majority of contractors predictmaterials prices will rise in 2013.“Moderate price swings for several mate-
rials last year gave contractors some breath-ing room, but future price spikes could pushmany firms into the red,” said KenSimonson, chief economist of the construc-tion trade association. “Contractors stillhave not recovered from the cost increasesthey had to absorb in 2010 and 2011.”For the 12 months ending in December,
the producer price index for all constructioninputs rose 1.3 percent, similar to what con-tractors are estimated to charge for new non-residential buildings, Simonson noted. Theindex for new school buildings rose 1.1 per-cent; new industrial and office construction,1.4 percent; and new warehouses, 2.6 per-cent. Materials costs rose more than 5 per-cent in both 2010 and 2011, while bid priceswere virtually unchanged in 2010 and rosebetween 2.9 and 4.8 percent in 2011,depending on building type, Simonsonadded.The construction economist attributed the
mild annual materials price increase to mod-eration in fuel, metals and paving prices,which offset steeper jumps in several mate-rials used in residential building. The indexfor steel mill products fell 7.9 percent in
2012 after leaping more than 12 percent inboth 2010 and 2011. The index for alu-minum mill shapes decreased 1.6 percent,while copper and brass mill shapesincreased 1 percent. Diesel prices climbed1.8 percent, the smallest amount since 2008.The indexes for concrete products rose 2.4percent and asphalt paving mixtures andblocks, 4.4 percent.In contrast, the index for gypsum prod-
ucts soared 14.0 percent, which Simonsonsaid reflected the demand from new apart-ment and home construction, along withrenovations of office and retail space. Otherbuilding products with substantial priceincreases included lumber and plywood,10.8 percent; architectural coatings, such aspaint, 10.1 percent; insulation materials, 5.1percent; and plastic construction products,
4.7 percent.Association officials noted that 90 per-
cent of contractors surveyed for the group’s2013 Construction Hiring and BusinessOutlook predict materials prices willincrease in 2013. They added that anincreasing number of contractors will try topass on some of those price increases to cus-tomers this year, noting that 29 percentreport they will try to raise bid prices thisyear, compared to only 15 percent thatraised prices in 2012.“The days of low bids and relatively inex-
pensive construction costs are clearly num-bered,” said Stephen E. Sandherr, the asso-ciation’s chief executive officer. “While theconstruction industry is still facing some dif-ficult headwinds, there is a clear sense thatthe industry is slowly turning a corner.”
Construction Material Prices Down Between Nov., Dec.
Broce Manufacturing Co. announcedDec. 1, 2012, that it has joined withWaldon Equipment LLC to offer addi-tional lines of equipment.In 1963, Broce introduced the first-
ever mid-mount self-propelled sweeperand continues to be the leader in thatmarket. Providing high quality products and
product support has allowed Broce tomaintain the market leadership position,according to the company.Since 1957, Waldon has been manu-
facturing compact four-wheel drivearticulated loaders and forklifts and in1997, the company added the “DigMaster” loader backhoe line. "Combined, our two companies
(Broce and Waldon) possess more than105 years in heavy equipment manufac-turing," said Jim Cornelson, president ofsales of Broce. "The Broce/Waldonteam brings together a shared vision ofproviding the highest quality productsand services to our customers in theirrespective industries. This new partner-ship highlights our commitment toexcellence and will enable us to betterserve the broad range of needs of ourcustomers.“We will continue working hard to
earn your business and want to person-ally thank you for your loyalty and sup-port. Any questions related to the newproducts can be directed to your region-al salesman or Broce’s corporateoffice,” added Cornelson.For more information, visit
http://www.brocebroom.com orhttp://www.waldonequipment.ca/.
Two Is Better Than One...
Broce Manufacturing Joins Forces With Waldon Equipment
Merle Patzkowsky (L), managing partner, Waldon Equipment shakes hands with Jim Cornelson, president, sales, Broce/Waldon,taken recently at the AED Summit Condex show in Las Vegas.
W.S. Tyler introduced a 10-ft. (3 m) wide version ofits F-Class Vibrating Screen during MINExpo 2012 inLas Vegas. The F-Class offers a double eccentricscreening solution for challenging applications thatrequire minimal vibration transmission during opera-tion. This allows for the use of multiple machines with-in the same building or structure without the same rein-forcing measures required to house traditional vibrat-ing screens. Due to its consistent G-Force, the F-Classalso is known for its ability to keep screen openingsclean, thus avoiding the pegging of material and mak-ing the processing of sticky material possible, accord-ing to the manufacturer.“It just made sense,” W.S. Tyler President Florian
Festge said. “Our double eccentric technology hasbeen so effective that customers expressed the need forlarger screens as their operations grew. We answeredwith the largest double eccentric screen to date, the 10-foot-wide F-Class. Its size, paired with its versatility,make the F-Class a viable option for customers whowere previously forced to invest in much more expen-sive technologies, such as exciter driven screens. Forthese clients, the F-Class offers reduced capital expen-ditures combined with enhanced screening perform-ance. How do you beat that? ” The 10-ft.-wide F-Class follows a tandem design.
Two completely new modules measuring 10 by 12 ft.(3 by 3.6 m) and 10 by 16 ft. (3 by 4.8 m) were engi-neered. By forming any combination of these twomodules, machine sizes of 10 by 24 ft. (3 by 7.3 m), 10by 28 ft. (3 by 8.5 m) or 10 by 32 ft. (3 by 9.7 m) cannow be configured according to the process require-ments. The F-Class, in tandem design, also can beoperated at variable speeds and with different angles ofinclination between the modules, thereby creating abanana type effect. The result is a fully customizedscreening system adaptable to meet the needs of almostany application. The F-Class is now available in widths ranging from
3 to 10 ft. (.9 to 3 m) and is ideal for screening situa-tions that require consistent, load independent per-formance at constant G-Force in all operational modes.Featuring four-bearing technology, the F-Class mini-mizes structural vibration and delivers a consistentstroke, which two-bearing or even horizontal screens
W.S Tyler UnveilsF-Class DoubleEccentric Screen
The F-Class offers a double eccentric screening solution for challenging applications that require minimal vibrationtransmission during operation.
Pages 29-43
Crushing, Screening & Recycling Section
see F-CLASS page 30
Page 30 • February 2, 2013 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
F-Class Features Rugged HUCK-BoltedScreen Body for Strength, Rigiditycannot provide. This means that, when equipped with the
right media choice, the F-Class virtually eliminates blindingand pegging. With the ability to handle the toughest applica-tions, the F-Class is designed and built for classifying ofores, copper, gold, minerals, stones, sand and gravel, accord-ing to the manufacturer.The F-Class features an advanced eccentric shaft design,
supported by four high-performance, double spherical rollerbearings. The double eccentric shaft creates a constant posi-tive stroke that handles material volume spikes without los-ing momentum. As the eccentric shaft turns, the screen bodyis forced to follow the shaft movement. While it travelsupward, the counterbalance weights move in the oppositedirection and create an equal force to that generated by thebody. As a result, the forces cancel each other, allowing adynamically balanced system that transmits minimal to novibrations into the structure. This allows multiple screens tobe placed side by side while minimizing the investments intoheavy structures. Furthermore, the design keeps noise emis-sions low for a quieter system and reduced overall plantnoise. These features are the reason why demanding produc-ers of products such as iron ore and phosphates as well aslimestone utilize the F-Class in buildings housing up to 45units over up to 8 stories while minimizing the investmentsinto the required structures. The continual circular screening action provided by the
eccentric design also produces a constant, optimized G-Force. Not only does this further maximize screening effi-ciency, it allows the F-Class to be an effective solution inboth wet and dry applications.Designed for high tonnage outputs, the F-Class can
process up to 1,200 tons (1,088 t) per hour, as well as pro-vide fast, accurate sizing. It precisely screens virtually anymaterial from 6 in. (15 cm) down to 20 mesh. To provide maximum versatility, the F-Class can be run
with up to three screen decks. The unit features inclines from10 to 25 degrees and comes with a base frame that allows forsimple installation in a customer’s existing structure.
The F-Class features a rugged HUCK-bolted screen body,allowing for extra strength and rigidity. Side plates are con-structed with high-strength carbon steel. The area surround-ing the shaft assembly is strengthened with a reinforcingplate, which ties together the side plate, screen panel andshaft assembly.Screening experts work to design the ideal screens for
each application. All 6, 8 and 10-ft. (1.8, 2.4 and 3 m) wideunits are built on platforms that combine a machine widthand a drive type, consisting of an eccentric shaft assembly.Within the platform, the customer chooses basic parameters,such as screen length and the quantity of decks the applica-tion requires. To personalize the machine and optimallyadapt to each operation, the customer then configures multi-ple variables such as deck set-up, suspension systems, rein-forcing plates, wear lining and stroke and speed combina-tions.Every F-Class vibrating machine is born from substantial
engineering experience. All screens undergo extensive test-ing, inspections and vibration analysis prior to shipping.These inspections assure proper workmanship, correct bal-ance and smooth operation. During commissioning onsite,the screen is again tested to make sure it achieves optimalperformance within the customer’s specific operation and
performance targets. The F-Class is backed by a standard 18-month warranty from date of shipment, 12 months from theinstallation date, or 6,000 operation hours — whichevercomes first. This warranty can be increased with optionalcustomer-specific warranty upgrade packages.W.S. Tyler is a member of the wholly owned German-
based Haver & Tyler Processing Technology Alliance, and aleading manufacturer, systems provider and specialist in thescreening, washing and pelletizing industry. Focused on allaspects of the screening circle, from particle analysis andscreen media, to vibrating screens and processing technolo-gy, as well as screening services, it’s the company’s missionto bring new approaches and technologies to the market-place. For more information, call 800/325-5993 or visit
www.wstyler.ca.
“Our double eccentric technology has been soeffective that customersexpressed the need for larger screens as their operations grew.”
Florian FestgeW.S. Tyler
“Its size, paired with its versatility, make the
F-Class a viable option for customers who were previously forced to invest in much more
expensive technologies.”
Florian FestgeW.S. Tyler
F-CLASS from page 29
www.whayne.com1400 Cecil Ave. • Louisville, KY
502-774-4441
www.ohiocat.com
www.altorfer.com 2600 6th Street S.W.
Cedar Rapids, IA 52404319-365-0551 • Fax: 319-365-5639
4712 Buckeye St.Davenport, IA 52802
563-324-1935 • Fax: 563-324-2409#1 Capitol Dr.
East Peoria, IL 61611304-694-1234 • Fax: 309-694-4148
4200 Rodger StreetSpringfield, IL 62705
217-529-5541 • Fax: 217-529-00201519 W. Kenyon Rd.Urbana, IL 61801
217-539-1671 • Fax: 217-359-63103520 Moberly Ave.Hannibal, MO 63401
573-221-8600 • Fax: 573-221-7187701 Highway 24WMoberly, MO 65270
660-263-8200 • Fax: 660-263-8203
Ashland, KY606-928-3444
Bowling Green, KY270-843-3275Corbin, KY
606-528-3140Dry Ridge, KY859-823-1500Evansville, IN812-425-4651
Hazard, KY606-439-4040Lexington, KY859-254-2756Paducah, KY
270-443-3631Pikeville, KY
606-437-6265
Cleveland, OH440-526-6200800-837-6200
Fax: 440-526-9513Cadiz, OH
740-942-4626800-837-6204
Fax: 740-942-4029Canton, OH
330-478-6525800-837-6207
Fax: 330-478-6529Cincinnati, OH513-771-0515888-332-4658
Fax: 513-672-7658Columbus, OH614-878-2287888-441-4658
Fax: 614-851-5015
Toledo, (Perrysburg) OH419-874-7975888-339-4658
Fax: 419-873-8255Troy, OH
937-335-7660888-330-4658
Fax: 937-335-6447Youngstown, OH330-530-9010800-837-6203
Fax: 330-530-9102Zanesville, OH740-453-0563800-837-6205
Fax: 740-452-3605Richwood, KY859-372-4665888-446-4658
Fax: 740-452-3605
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • February 2, 2013 • Page 31
Innovative American made no compromise
Join the revolution715-395-6060 www.exodusmachinesinc.com superior, wisconsin
BIG. Bad. fast. strong.
AVAILABLE.
The MX457130K lbs. 300 hp. 13,430lb@60’. 63’ 5” reach.
www.macallister.com7515 East 30th St.
Indianapolis, IN 46219800-382-1896Fort Wayne, IN800-944-0847South Bend
800-685-9849Lafayette, IN
800-283-4231Washington, IN800-932-5120Terre Haute, IN800-273-5650
www.fabickcat.comOne Fabick DriveFenton, MO 64026
800-845-9188St. Louis, MO866-531-3242Foristell, MO
800-539-9217Columbia, MO800-791-5401
Jefferson City, MO800-845-9177Springfield, MO888-959-2100Joplin, MO
866-313-1748Willow Springs, MO
866-628-1717Cape Girardeau, MO
800-845-9175Marion, IL
800-845-9179Metropolis, IL866-299-6044Salem, IL
800-845-9176Troy, IL
866-345-5681Mt. Carmel, IL888-769-7247
www.fabco.com11200 W. Silver Spring Rd.Milwaukee, WI 53225
414-461-9100 • Fax: 414-461-8899Madison, WI
608-271-6200LaCrosse, WI608-783-4891Eau Claire, WI715-832-6647Wausau, WI
715-359-6220Green Bay, WI920-498-8000Superior, WI
715-398-9696Marquette, MI906-475-4191
Page 32 • February 2, 2013 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Wirtgen Group’s Technologies Adapt for Extreme Conditions
The Wirtgen Group’s MineralTechnologies division offers a range of prod-ucts for mining and processing useful miner-als with the Wirtgen surface miners andKleemann crushing and screening machines. Extracting minerals in opencast deposits
and processing mineral raw materials placesgreat demands on man and machine.Durable, high-performance equipment is anabsolute necessity. Due to its many years ofexperience in the field of mineral technolo-gies, the Wirtgen Group has technologieswhich are adapted for the most extreme con-ditions, according to the manufacturer.
Wirtgen Surface MinersThe established mechanical mining pro-
cedure is accomplished without convention-al drilling, blasting and pre-crushing.Wirtgen uses its high-performance cuttingtechnology here. The surface miners func-tion much like cold milling machines, cut-ting and crushing the rock with a special cut-ting roller. Sturdy conveyor systems load itonto dumpers or deposit it beside the surfaceminer. Alternatively, the rock also can beplaced between the chassis behind themachine.
The Wirtgen Surface Miners have cuttingwidths of 7.2 to 13.8 ft. (2.20 to 4.20 m) andcutting depths of 7.8 to 32.7 in. (20 to 83 cm)up to a uniaxial compressive strength of 120MPa. Special machines for rock construc-tion can even cut hard granite up to 260MPa. Moreover, Wirtgen covers a perform-ance spectrum from 110 to 3,307 ton (100 to3,000 tph).
The Product Range: IndividuallyConfigurable Standard MachinesWith the 2200 SM, 2500 SM and 4200
SM, Wirtgen offers three performance class-es which can be variably configured specifi-cally for each project. All of the machinescan be configured for loading the materialinto dump trucks or depositing it as awindrow behind the machine. More thantwo dozen cutting roller designs are avail-able as standard, while additional configura-tions are developed and built for the specifictask at hand. The surface miners’ fields of application
include opencast mining and routing workon roads, railway lines and tunnels. Theyenable the selective extraction of valuableminerals, coal, limestone, gypsum, bauxite,
phosphate and iron ore with great purity.Constant expansion of the spectrum of usemeans that surface miners also are used forspecial applications in salt mining, granite,kimberlite and oil shale.
Kleemann Crushing andScreening Machines
The Wirtgen Group also offers a widerange of jaw, impact and cone crushers andas well as screening machines for processingmineral raw materials. Kleemann has beenin the business of processing natural stonefor more than 150 years. Pieces of rockobtained from drilling and blasting work inquarries are processed to defined grain sizes.These classified final granulations are usedas standardized additives for concrete andfor asphalt base, binder and surface coursesin road construction as well as civil engi-neering. In addition, Kleemann products are
designed to handle the hardest minerals andmaterials. Kleemann provides its customerswith application consulting for selecting theright machine to suit their requirements,according to the manufacturer.
The Product Range: SingleMachine or Interlinked Machine
CombinationsJaw crushers serve as classic primary
crushers in natural stone. The mobilemachines’ performance spectrum rangesfrom 110 to 1,653 tph (100 to 1,500 t).Extremely robust, high-performancemachines with feed capacities from 496 to1,102 tph (450 to 1,000 t) are used for tradi-tional quarry applications. Secondary crusher units such as track-
driven impact and cone crushers are electri-cally interlocked to work in tandem with pri-mary crushers and screens. The screen areaof the chain-driven screening machinesranges from 75 to 198 sq. ft. (7 to 18.4 sq m).Their performance spectrum runs all the wayup to 1,102 tph, making them well-suited fordemanding tasks and material which is diffi-cult to screen. Stationary machines withcapacities from 110 to 1,102 tph handle all ofthe individual processes in addition to crush-ing and screening, such as washing, sandprocessing, mixing, dust collecting, etc., thusrounding off the range of offers.For more information, visit www.wirt-
gen.com.
The Wirtgen Group offers machines for mining and processing useful minerals with the Wirtgen surface miners and Kleemann crushing and screening machines.
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • February 2, 2013 • Page 33
Lokotrack LT106 jaw plant
New, improved LT106 jaw plant
Groundbreaking excellence
the imncrease prrI
oundbbrG
w plant. NeT106 jaotrack L LT106 jaoked Lvothe impreduce operating costs with y and rtivitoducease pr
cxing eeakoundbrT ed L LT106 javo, imprwNe
eseaturw f featurw plant. Needuce operating costs with
eellenccw plantT106 ja
et tso Mabo out
enveand d hand d c
t retamand d a incl ud the im
E-mail: minerals
.yodaor tibutetso distrT106, ed L LT106, contacvow and imprabout the ne
ssecederpstinahtelbailereromem help my air filtration systduty-vand hea
. A re classy in its sizand cost efficiencviledotenibmoc,rosneslevellair
em with ultrasonic omation systand an advanced aut, high ineroryevincluding a radial side conw plant. NeT106 jaotrack L LT106 jaoked Lvothe impr
our local t yT106, contace n moro learTTo lear.ro
6 01TLLTsihtekaem help me ivobust crusher dr. A ry itcapactsebehtrev
em with ultrasonic wheels tia fly, high iner
, eseaturw f featurw plant. Ne
wwwwE-m mai
om.c.metsow.com.nam@metsoE-mail: minerals
BUTLER MACHINERY CO.www.butlermachinery.com
3402 36th St. SWFargo, ND 58014
701-280-3100
800-726-7475
3630 Miriam Ave.Bismarck, ND 58501
701-223-0890
2803 I-94 BusinessLoop E
Dickinson, ND 58601701-456-1400
1201 S. 46th St.Grand Forks, ND 58201
701-775-4238
1505 Hwy 2, Bypass EMinot, ND 58701
701-852-3508
4950 E Highway 12Aberdeen SD 57401
605-225-6240
3601 Deadwood Ave. NRapid City, SD 57702
605-342-4850
20571 Truck Stop Ave.Pierre, SD 57501
605-224-5400
3201 N. Louise Ave.Sioux Falls, SD 57107
605-336-3010
RB SCOTT COMPANY INC.
www.rbscott.com1011 Short St.
Eau Claire, WI 54701715-832-9292
Fax: 715-832-7767
CENTRAL SERVICE &
SUPPLY, INC.www.centralsands.com
1701 SE Hulsizer Rd.Ankeny, IA 50021
515-964-8600
Fax: 515-964-3314
PROCESSMACHINERY INC.www.processmachinery.com
1636 Isaac Shelby DriveShelbyville, KY 40065
800-860-1523
860 Kaderly DriveColumbus, OH 43228
866-249-4330
ROAD BUILDERSMACHINERY &
SUPPLY CO., INC.www.roadbuildersmachinery.com
1001 S. 7th St. TrafficwayKansas City, KS 66105
913-371-3822
Fax: 913-371-3870
4115 S. 90th St.Omaha, NE
402-331-9200
5601 Fletcher Ave.Lincoln, NE
402-325-0447
4949 Juergen Rd.Grand Island, NE
308-384-2620
AIS CONSTRUCTION
EQUIPMENTCORP.
3600 N. Grand River Ave.Lansing, MI 48906
517-321-8000
Fax: 517-321-4191
www.aisequip.com
Grand Rapids600 44th Street S.W.
Grand Rapids, MI 49548616-538-2400
Fax: 616-538-0449
Northeast Detroit65809 Gratiot AvenueLenox, MI 48050
586-727-7502
Fax: 586-727-7311
Saginaw4600 AIS DriveP.O. Box 253
Bridgeport, MI 48722989-777-0090
Fax: 989-777-1583
Traverse City8300 M-72 East
Williamsburg, MI 49690231-267-5060
Fax: 231-267-5257
West Detroit, MI56555 Pontiac Trail
New Hudson, MI 48165248-437-8121
800-457-8121
816 N. Dirksen ParkwaySpringfield, IL 62702
217-789-7711Fax: 217-744-7314
220 E. Frontage Rd.Bolingbrook, IL 60440
630-739-7474Fax: 630-739-9443
18210 Beck Rd.Marengo, IL 60152815-923-4966
Fax: 815-923-4973
1505 Donna DriveCarterville, IL 62918
618-985-3399Fax: 618-985-2992
6450 Melton Rd.Portage, IN 46368219-764-8080
Fax: 219-764-8613
4670 Crossroads Industrial Dr.Bridgeton, MO 63044
314-291-1330Fax: 314-291-8050
4110 I-70 Drive SoutheastColumbia, MO 65201
573-814-0083Fax: 573-814-0087
3364 Percy DriveCape Girardeau, MO 63702
573-334-5252Fax: 573-334-1887
701 Industrial DrivePalmyra, MO 63461
573-769-2056Fax: 573-769-2059
ROLAND MACHINERY CO.www.rolandmachinery.com
Page 34 • February 2, 2013 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Superior Trailblazer Conveyor Offers Quick Setup TimeSuperior Industries’ Trailblazer conveyor
enables crews to set up or take down in as lit-tle as two hours. That’s a significant timesavings over both transfer conveyors, whichcontain multiple pieces, and stationarygroundline conveyors, which require days oreven weeks for setup and tear down. The versatility of the Trailblazer conveyor
makes it ideal for a variety of applicationsand industries including aggregate, mining,recycling, waste handling and bulk process-ing. It includes 500-ft. (152 m) of fully belt-ed and assembled groundline-style conveyorthat folds up in an accordion style to easilytransport on an attached 84-ft. (25.6 m) trail-er. Providing 500-ft. in a one-load, towablepackage makes installation as easy as deter-mining a starting point and marking the des-tination. Once marked, the truck drivermoves forward, and a crew of two to fourunloads the conveyor. The crew inserts thesupports as the conveyor takes shape, setstake-ups and attaches the conveyor’s hopper.For added productivity, the hopper can beplaced at any location along the conveyor. The Trailblazer conveyor’s accordion
design not only allows for easier transport,but it also provides greater length with lessset-up time. With a length of 60 to 80 ft. (18to 24 m) for an average transport conveyor,it would take up to eight of them to equal thesame 500-ft. stretch of the Trailblazer con-
veyor. Those other conveyors also wouldrequire eight belts to maintain, eight drivesto power and eight transfer points.Connecting points can become spillagezones and greasing points. Eliminating them
not only decreases the amount of spillage,but also the number of areas that require sup-ports. That, in turn, significantly reducesdowntime for maintenance. Further enhancing efficiency and produc-
tivity is Superior’s Navigator return trainer.Used to provide continuous belt alignment,the return roller from the company’s compo-nents division maintains tracking and avoidsmaterial buildup that can cause costly down-time. Hinges provide belt flexibility to easilyaccommodate variations in grade, and a 50hp (37 kW) system ensures smooth travel atany incline. Trailblazer conveyors are fully customiz-
able and can be designed to various lengthsand with additional components to fit a cus-tomer’s specifications. Standard belt sizesare 36 or 42 in. (91 or 107 cm) wide by 500ft. long. Capacity limits range from 1,000 to1,200 tph (907 to 1,088 t) of 100 lbs. per cu.ft. density material, with a belt speed of up to400 ft. (122 m) per minute.The Trailblazer conveyor also is engi-
neered and equipped with safety in mind. Itstowable package includes a fifth wheel hitch,brakes and directional lights. Transportstraps and pull-pins ensure that each convey-or section comes off the chassis one at atime, and help guide it safely onto supports.Bolt-together guard rails easily pin intoplace. In addition, to ensure safety during setup and take down, Superior’s team providesconveyor operators with complete trainingon the system. For more information, call 800/321-1558
or visit www.superior-ind.com.
The Trailblazer conveyor includes 500-ft. (152 m) of fully belted and assembledgroundline-style conveyor that folds up in an accordion style to easily transport onan attached 84-ft. (25.6 m) trailer.
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • February 2, 2013 • Page 35
Page 36 • February 2, 2013 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
POWERFULrack machines provide thGlobal T Track machines provide the
heaviest & most productive componentsto help you conquer your toughest jobs.
TL
The
LGT
POWERFULrack machines provide the
heaviest & most productive componentsto help you conquer your toughest jobs.
TLINLINET
to help you conquer your toughest jobs.
ABLEPORTTABLErack series machines are sGlobal T Track series machines are sleeker
and more compact, making them easy tot to and around any job site.transpor
ABLPROFITTABLErack systems are desAll Global T Track systems are designed
to be 100% compatible with each otherfectCombine them to build the per
to help you conquer your toughest jobs.
rack series machines are sleekerand more compact, making them easy to
t to and around any job site.
ABLErack systems are designed
. ch other r.fect
fectCombine them to build the persystem for your operation.
fect
racks provide both job site mobility asTwell as the foundation required to isolateplant vibration.
r
racks provide both job site mobility aswell as the foundation required to isolate
n more: wwwLog on, lear
r
.kpijci.com. more: www w.kpijci.com.
GT145S Screen
12500 S. Cicero Ave.Alsip, IL 60803800-323-8761
Fax: 708-389-2963
Villa Park, IL630-530-7600
Rockford, IL815-227-0555
East Peoria, IL309-694-4455
Springfield, IL217-789-0351
5633 West Hwy 13Savage, MN 55378
800-888-9515Fax: 952-895-9564
315 North Hoover RoadVirginia, MN 55792
800-752-4304Fax: 218-741-9465
314 Garfield AvenueDuluth, MN 55802
800-888-9535Fax: 218-727-3340
2525 16th Avenue SWCedar Rapids, IA 52404
800-616-6615Fax: 319-363-2075
1400 N. Hwy 75Sioux City, IA 51105
800-633-9104Fax: 712-252-5064
100 Sheridan AvenueDes Moines, IA 50313
800-555-1445Fax: 515-282-4876
ROAD MACHINERY& SUPPLIES CO.
McALLISTEREQUIPMENT CO.
YOUR COMPLETE AGGREGATE SOLUTIONYOUR COMPLETE AGGREGATE SOLUTION GGREGA ATE SOLUTION
3600 North Grand River AvenueLansing, MI 48906
517-321-8000Fax : 517-321-6275
600 44th Street S.W.Grand Rapids, MI 49548
616-538-2400Fax: 616-538-0449
65809 Gratiot AvenueLenox, MI 48050
586-727-7502Fax: 586-727-7311
AIS CONSTRUCTION EQUIPMENT CORPORATION4600 AIS DriveP.O. Box 253
Bridgeport, MI 48722989-777-0090
Fax: 989-777-1583
8300 M-72 EastWilliamsburg, MI 49690
231-267-5060Fax: 231-267-5257
56555 Pontiac TrailNew Hudson, MI 48165
248-437-8121800-457-8121
www.aisequip.com
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • February 2, 2013 • Page 37
5050 N. River Rd.Schiller Park, IL 60176
847-678-3633Fax: 847-678-3587
Mokena, IL708-596-8050
West Chicago, IL630-293-0606
Wauconda, IL847-526-4255
Yorkville, IL630-553-0150
www.atlasbobcat.com
Leslie Equipment Company
Cowen, WV304-226-3299
Beaver, WV304-255-1525
Cross Lanes, WV304-204-1818Fairmont, WV304-534-5454
Norton, WV304-636-6421Pikeville, KY
606-432-0321Marietta, OH
740-373-5255
www.lec1.com
Bandit of Ohio
230 W. Greenwich RoadSeville, OH 44273
330-338-3992Fax: 330-695-2020
110 N. Diagonal St.Fredricksburg, OH
330-466-4345
1800 W. Hwy 13Burnsville, MN 55337
952-894-0894877-262-2284
3101 Spruce St.Little Canada, MN 55117
651-407-3727877-331-0295
745 Exchange DriveHudson, WI 54016
715-531-0801866-268-2418
www.tristatebobcat.com
Page 38 • February 2, 2013 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Brandeis Machinery & Supply Co.www.brandeismachinery.com
Evansville, IN(812) 425-4491Ft. Wayne, IN
(260) 489- 4551Indianapolis, IN(317) 872-8410
Corbin, KY(606) 528-3700Lexington, KY(859) 259-3456Louisville, KY(502) 491-4000Paducah, KY
(270) 444-8390Stanville, KY
(606) 478-9201
Gibson Machinery LLCwww.gibsonmachinery.com
Oakwood Village (Cleveland) OH(440) 439-4000Pittsburgh, PA(724) 695-5000
Bradco Series II Mulchers TransformTrees, Brush Into Fine Chip Layer
The new Bradco Series II mulchers by PaladinAttachments attach to excavators, skid steers and forestrytractors to shred hardwood trees, brush and ground vegeta-tion up to 8 in. (20 cm) in diameter. Available in cuttingwidths of 36, 60 and 72 in. (91, 152 and 183 cm) — depend-ing on the machine and application — they feature a heavy-duty bent-axis variable displacement piston motor that offersbetter performance on demand, prevents stalling underheavy loads and provides a quicker recovery time, accordingto the manufacturer.
To increase versatility, return on investment and produc-tivity, they can be switched between prime movers withoutchanging hydraulic motors, belts or belt drive sprockets/pul-leys. The drive train’s synchronous belt drive system elimi-nates belt and belt drive sprocket/pulley slippage to loweroperating cost and maintenance needs. An interchangeabletooth design keeps each tooth seated in its holder with a crossbar that runs the full width of each tooth. Standard reversiblecarbide teeth double operation life and can be easily inter-changed without needing to rebalance the rotor. The spiral
cut pattern reduces the amount of cut per tooth for less drag,finer chip size and increased performance.
The heavy-duty rotor construction of the Bradco Series IIMulchers features a balanced 0.75-in. (1.9 cm) wall drumthat rotates at speeds up to 2,000 rpm with a 2.44-in. (6.2 cm)high-strength alloy steel shaft that passes through the entirelength. Internal reinforcement rings minimize rotor flex forlonger bearing life.
Available exclusively on the MM36E 36-in. excavatormodel, the tree stabilization guide captures a standing treetrunk between the cutting rotor and frame with an angled“kick” plate to help the operator maintain full control. AllBradco Series II mulchers feature an adjustable push bar andreplaceable abrasion-resistant AR400 skid shoes. An option-al oil cooler also is available for both field and factory instal-lation. Skid steer and tractor models feature an on-boardpressure gauge for monitoring the system pressure with easyviewing from operating position.
For more information, call 800/456-7100 or visitwww.paladinattachments.com.
An interchangeable tooth design keeps each tooth seated in its holder with a cross bar that runs the full widthof each tooth.
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • February 2, 2013 • Page 39
Lokotrack ST2.4 mobile screen
Introducing the new Lokotrack ST2.4 mobile screen
Quality delivers precision
e ee scrhe e nT
uality delivtQg htnicudortnI
o operating position in t tom transporeen that goes frersatileotrack ST2.4 is a vokw Lhe ne
ers pry deliv4.2TSkcartokoLweneh
o operating position in t mobile , compacersatile
ecisioners prneercselibom4
E-m mai
loca al Me ee scrv vid opr
e e a saffe and easy with a scrupti im buil t w just a
e ee scr
.com.nam@metsoE-mail: minerals
.yodaor tibutetso distrlocal My contace bn morear. Leening challenges
o rou need ty yviding the exibilitx that raises heen boe and easy with a scr
eening media changes arcr. Syuptime and e�ciency components fqualitbuilt with high-
eliableobust and r. Repsw simple ste f feo operating position in t tom transporeen that goes fr
our ting yy contacent ero di erespond to r
, draulicallyyx that raises he eening media changes ar
e tivoduce pror mor f for mor, the ST2.4 is eliable
o operating position in
wwww
om.c.metsow
BUTLER MACHINERY CO.www.butlermachinery.com
3402 36th St. SWFargo, ND 58014
701-280-3100
800-726-7475
3630 Miriam Ave.Bismarck, ND 58501
701-223-0890
2803 I-94 BusinessLoop E
Dickinson, ND 58601701-456-1400
1201 S. 46th St.Grand Forks, ND 58201
701-775-4238
1505 Hwy 2, Bypass EMinot, ND 58701
701-852-3508
4950 E Highway 12Aberdeen SD 57401
605-225-6240
3601 Deadwood Ave. NRapid City, SD 57702
605-342-4850
20571 Truck Stop Ave.Pierre, SD 57501
605-224-5400
3201 N. Louise Ave.Sioux Falls, SD 57107
605-336-3010
CENTRAL SERVICE & SUPPLY, INC.www.centralsands.com
1701 SE Hulsizer Rd.Ankeny, IA 50021
515-964-8600
Fax: 515-964-3314
816 N. Dirksen ParkwaySpringfield, IL 62702
217-789-7711
Fax: 217-744-7314
220 E. Frontage Rd.Bolingbrook, IL 60440
630-739-7474
Fax: 630-739-9443
18210 Beck Rd.Marengo, IL 60152
815-923-4966
Fax: 815-923-4973
1505 Donna DriveCarterville, IL 62918
618-985-3399
Fax: 618-985-2992
6450 Melton Rd.Portage, IN 46368
219-764-8080
Fax: 219-764-8613
4670 Crossroads Industrial Dr.Bridgeton, MO 63044
314-291-1330
Fax: 314-291-8050
4110 I-70 Drive SoutheastColumbia, MO 65201
573-814-0083
Fax: 573-814-0087
3364 Percy DriveCape Girardeau, MO 63702
573-334-5252
Fax: 573-334-1887
701 Industrial DrivePalmyra, MO 63461
573-769-2056
Fax: 573-769-2059
AIS CONSTRUCTION
EQUIPMENTCORP.
3600 N. Grand River Ave.Lansing, MI 48906
517-321-8000
Fax: 517-321-6275
www.aisequip.com
Grand Rapids600 44th Street S.W.
Grand Rapids, MI 49548616-538-2400
Fax: 616-538-0449
Northeast Detroit65809 Gratiot AvenueLenox, MI 48050
586-727-7502
Fax: 586-727-7311
Saginaw4600 AIS DriveP.O. Box 253
Bridgeport, MI 48722989-777-0090
Fax: 989-777-1583
Traverse City8300 M-72 East
Williamsburg, MI 49690231-267-5060
Fax: 231-267-5257
West Detroit, MI56555 Pontiac Trail
New Hudson, MI 48165248-437-8121
800-457-8121
ROLAND MACHINERY CO.www.rolandmachinery.com
Page 40 • February 2, 2013 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
www.superior-ind.com
KING OF THE HILL
At Superior, we’re constantly searching for new ways to use our knowledge of bulk material handling systems to solve challenges and improve production. We’re driven by curiosity, loaded with determi-nation and energized by progress. How can we help you?
Proud partners of General Equipment & Supplies
Fargo, ND4300 Main Ave.Fargo, ND 58103800-437-2924Local: 701-282-2662Fax: 701-364-2190
Sioux Falls, SD3902 N Jessica Ave.Sioux Falls, SD 57104Local: 605-336-9000Fax: 605-336-0073
Bismarck, ND2300 Vermont Ave.Bismarck, ND 58504800-279-4437Local: 701-223-9700Fax: 701-223-4815
Shakopee, MN4600 Valley Industrial Blvd SShakopee, MN 55379800-966-1455Local: 952-224-1500Fax: 952-224-1570
Minot, ND905 20th Ave. SEMinot, ND 58701800-825-0479Local: 701-852-0479Fax: 701-852-1451
Official dealer partner of Superior Industries in North Dakota, South Dakota, Minnesota & Iowa
Powerscreen Launches NewXH320X Mobile Impact CrusherPowerscreen, a leading provider of
mobile crushing and screening equipment,has launched the new XH320X impactcrusher.Damian Power, Powerscreen global prod-
uct director, said, “Building upon the successof the XH320 in the quarry and recyclingindustry, the new XH320X is the next gener-ation of impact crusher for these markets.”The XH320X has been developed to
incorporate a fully independent hydraulical-ly driven pre-screen, which will improvefines removal and reduce chamber wearcosts for the customer. To coincide with theindependent prescreen feature, a hydraulical-ly folding extended side conveyor with astockpile height of 12 ft. (3.7 m) has beenadded to the machine.
The hopper capacity also has beenincreased by the addition of hopper exten-sions, which also can be hydraulically fold-ed for transport. The new hopper designincorporates hydraulic locking pins for rapidsetup time and removes the need for manualwedges.The XH320X has a full length product
conveyor, which is ideal for quarry applica-tions with optional under pan feeder forrecycled applications where steel may be inthe material. There also is the option of anextended hydraulically folding product con-veyor which increases the stockpile height to13 ft. (4 m).For more information, visit www.power-
screen.com.
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • February 2, 2013 • Page 41
Page 42 • February 2, 2013 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • February 2, 2013 • Page 43
SENNEBOGEN green line material handling machines make your competitors “green with envy”SENNEBOGEN green line material handling machines make your competitors “green with envy”
High Productivity – Low Operating Costs
Wixom, MI 248-449-6700
Muskegon, MI231-798-8754
Kentwood, MI616-698-2960
Battle Creek, MI269-965-1269
Romulus, MI734-641-8238
Saginaw, MI989-752-9400
Sterling Hts, MI586-977-6000
Zeeland, MI616-748-4108
Lansing, MI517-272-5033
Wixom, MI (Cons. Division)248-356-5200
Byron Center, MI616-878-7450
Louisville, KY 502-491-4000
Evansville, IN812-425-4491
Corbin, KY606-528-3700
Lexington, KY859-259-3456
Stanville, KY606-478-9201
Paducah, KY270-444-8390
Indianapolis, IN317-872-8410
Ft.Wayne, IN260-489-4551
HOWELL TRACTOR &EQUIPMENT
LLCwww.howelltractor.com
Gary,IN800-852-8816
Peru, IL800-342-6072
GIBSON MACHINERY
LLCwww.gibson
machinery.com
Oakwood Village,OH
440-439-4000
Pittsburgh, PA 724-695-5000
Carterville, IL618/985-3399
Bridgeton, MO314-291-1330
Columbia, MO573-814-0083
Cape Girardeau, MO573-334-5252
Palmyra, MO573-769-2056
Franksville, WI262-835-2710
DePere, WI920-532-0165
DeForest, WI608-842-4151
Eau Claire, WI715-874-5400
Schofield, WI715-355-9898
Escanaba, MI906-786-6920
THE VICTOR L.PHILLIPS CO.
www.vlpco.com
Kansas City, MO 800-878-9290
Joplin, MO800-878-8223
Brookline Station,MO
800-955-2729
Wichita, KS800-878-3346
Topeka, KS800-878-4345
Garden City, KS 800-511-1435
Savage, MN 800-888-9515
Des Moines, IA 800-555-1445
Cedar Rapids, IA 800-616-6615
Sioux City, IA 800-633-9104
Milan, IL 800-633-9114
Duluth, MN 800-888-9535
Virginia, MN 800-752-4304
Bismark, ND800-247-1282
Dickinson, ND888-418-2873
Fargo, ND800-342-4330
Omaha, NE866-733-1100
Minot, ND701-852-3188
Rapid City, SD888-388-0266
Sioux Falls, SD800-262-5373
Williston, ND877-570-4635
Lincoln, NE866-801-6261
ALTA EQUIPMENT COMPANYwww.altaconstructionequipment.com
BRANDEIS MACHINERY & SUPPLY COMPANY
www.brandeismachinery.com
ROLAND MACHINERY CO.www.rolandmachinery.com
ROAD MACHINERY & SUPPLIES CO.
www.rmsequipment.com
TITAN MACHINERYwww.titanmachinery.com
Page 44 • February 2, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Authorized Doosan Dealers
ILLINOISLuby Equipment
Quincy217-222-5454
lubyequipment.com
INDIANARonson Equipment Co. LLC
Lowell
ronsonequipment.com
IOWABrown’s Heavy Equipment, Inc.
Ames
brownsheavyequipment.com
RTL Equipment Inc.Grimes
Swisher
rtlequipment.com
MICHIGANCarleton Equipment Company, Inc.
Kalamazoo
Byron Center
Livonia
Saginaw989-777-6666
carletonequipment.com
Midway Rentals and SalesNegaunee
906-228-4200mrmqt.com
MINNESOTALano Equipment Inc.
Shakopee
lanoequip.com
MISSOURIBobcat of St. Louis
Valley Park
Columbia
bobcatofstl.com
Custom Truck & Equipment, LLCKansas City
customtruckandequipment.com
Luby EquipmentCape Girardeau
lubyequipment.com
NEBRASKABobcat of Omaha
omaha-tractor.com
NORTH DAKOTABobcat of Devils Lake
Devils Lake
bobcatofgrandforks.com
Bobcat of Grand Forks, Inc.Grand Forks
bobcatofgrandforks.com
Bobcat of WillistonWilliston
701-572-5050bobcatofgrandforks.com
SOUTH DAKOTADiesel Machinery Inc
Sioux Falls
Rapid City
Aberdeen
dieselmachinery.com
WISCONSINSwiderski Equipment, Inc.
Mosinee
Wausau
Thorp715-669-5255
Antigo
Waupaca
swiderskiequipment.com
oo DdzeirohtAu
sreal Denaso
Luq EonsRon
IN
qeylub-712Q EybyuL
ILL
llweoLCLL.o C otnmepiu
ANAID
moc.tnmepiu4545-222-
ynciuQtnemquip E
SINOIILL
yellVaSf t oacbBoOUSSIM
uqeoanl
ohakSquip EoanL
ENNIM
kra PsiuoL. tS
IROU
moc.pi
eepo.cn Itnemquip
ATTAOSE
l Falxx FaluoSiincha Mll MeseiDKADHTUOS
rofdnargfotacobb5050-275-017
ntosilliWilWf oatcboB
scn Iyy Ire
ATTAOKKO
omc.skr50
notislil
Gquip ELTRvaehsnworb
vae Hs’nwroBI
eonsonr
seimrG.cn Itnemquipmoc.tnemipuqeyv
smeA.cn I,tnemquip Eyv
WAO
omc.tnempiuq
ir GepaCquip Eyy EbyuLdenakucrtmtosuc
sasanK E & uckr T TrmotsuCfotacobb
umolC
uaderatnemquip
moc.tnempquide
yti CsCLL,tnemquip E
omc.lts
abium
enesioMmpiuq EikrseidwSSNOCSIW
renihcamlesdie
needrbeA
yti CdpiaR
.cn I,ntemNIS
moc.y
n
y
royB
aKpqui EnotelarCICHM
quieltr
S
G
retenn Cro
ozoamal.cn I,yy,anpmo C otnem
NAGIICH
moc.tnempqui
rheisw
seimrG
Df t obBoDHTRON
acrt-ahmao
f t oacbBoARBEN
mepiuqeylub
ir GepaC
kLliATTAOKAD
moc.rtoac
ahamOf AKSA
moc.tnme
uadera
emipuqieksreidws
aacupaW
oigntA525-96615-7
phorT
ausauW
moc.tne
a
55
rm069
eNe Rayy RwdiMentoelrac-989aS
L
royB
omctqmr0024-822-eneauge
sealSdn asaltnemoc.tnempquie
6666-777-wnaiga
ainoviL
retenn Cro
nargfotacobb
FandrGnarGf t oacbBonargfotacobb
sliveDDf t oacbBo
omc.skrofdn
skro F.cn, Iskrod Fn
omc.skrofdn
kea LekaLs live
rm
omc.tqmr
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 2, 2013 • Page 45
Doosan and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. ©2013 Doosan Infracore Construction Equipment America. All rights reserved. | 0113707
Dean BlackBlack Construction Co., Devils Lake, ND
“A�er we demonstrated it, we purchased it the same week!”Doosan delivers solid machines, unsurpassed customer service and an expanding dealer network plus an unrivaled 48-hour parts guarantee.
Visit your local Doosan dealer to learn more. Scan the code or visit doosanequipment.com/dealer to see how close a dealer is to you.
Doosan Delivers
aedgnidnapxerevilen dasooD
48dleavir unn aslu pkrowt nerrleessaprusn u,senihca mdilo ssr
eetnaaru gstar purroh-48n ad nae civresr emotsucd e
aedgnidnapxe
48dleavir unn aslu pkrowt nerr nele
.eetnaaru gstar purr poh48
Page 46 • February 2, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Attendees Partake in Seminars, Enjoy Free Lunch, Win Prizes
Tim Niebur of Niebur Tractor, Hastings, Minn., workedthe Kubota booth, which featured this Kubota L5740tractor.
Chad Adams, territory manager of Ziegler CAT was onhand to answer any and all question about Cat iron.
Isaak Smith (L) and Karl Poling, both of I. SmithEarthscapes, St. Paul, Minn., attempt to guess theweight of a boulder carried by this Bobcat E26 exca-vator. If they guess correctly, they win a toy BobcatT190. Lano Equipment Inc. of Anoka, Minn., sponsoredthe contest.
Richard Ohm of Flying W Gardens, Park Rapids, Minn.,accepts a grand prize of $250 from Jordi Larson ofthe Northern Green Expo.
Show attendees were able to attend seminars.
Ron (Hogz) Hogan of Merit Chevrolet, St. Paul, Minn.,is eager to discuss this 2013 Chevrolet 3500HD with aKnapheide landscape body.
Monty Woolf of Trenchers Plus, Burnsville, Minn., isproud to discuss the debut of the Toro Pro Sneak 360vibratory plow.
EXPO from page 10
SECT IONAttachments
Safety, Efficiency Depend on Proper Drill OperationBy Randy StevensSPECIAL TO CEG
Pneumatic concrete dowel drills have onepurpose — to drill holes. While their intend-ed use is easy to recognize, operation of thisequipment isn’t quite so simple. In fact, it’s abit of a science. That’s not to say they’re dif-ficult to operate. But there are certain bestpractices and processes to keep in mind forproper drill operation, whether it’s an on-grade, slab-rider or equipment-mountedmodel. Operators who adopt these guide-lines and implement them on every job arerewarded with better performance from themachine and fewer hassles overall.
First Things FirstBefore even getting the drill close to a
concrete slab, a few simple preparations areneeded. A pneumatic dowel drill virtuallycomes out of a box, poised to go to work; allit takes to ready it for a job is air, a drill bitand a couple simple steps. Specific instruc-tions vary with each make and model, so fol-low the exact recommendations in theowner’s manual. Generally speaking, thebasic items begin with attaching and secur-ing the air hose from the compressor to thedrill. Next, install the drill bits. When doingso, it’s necessary to have the correct bit guidebushing to match the bit. This centralizes thebit and keeps it from moving around toomuch. The bit also must be the proper chucksize for the drill. Adjust the drill spacing andheight, level the drill and set the drillingdepth. Finally, be sure to start with the proper
lubricating oil in the oiler. Most manufactur-ers recommend rock drill oil, as it’s heavyand thick enough to run this large of a pieceof equipment. Some operators may try to usepneumatic tool oil or even automatic trans-mission fluid. These types of lubricants aremuch lighter and almost a watery consisten-cy. While ideal for smaller tools, like impactwrenches, these lubricants often won’t standup to the demands of a large dowel drill. After these basic preparations, a dowel
drill is almost ready to begin its job. Prior to
any actual drilling, every operator shouldknow the basics of proper use to ensure asmooth process and end result. Following afew guidelines will result in projects that arecompleted efficiently, safely and withoutequipment failure whether they’re newpours or full-depth repairs.
Under PressureMost highway paving, airport repair and
smaller residential roadwork projects haveone thing in common: deadlines. Everypiece of equipment must perform at its max-imum efficiency level so the company cankeep up with strict timelines and avoidpenalties. Setting a drill to the proper feed pressure
is the first step to optimal drilling. There is acommon — and incorrect — belief thatincreasing the feed pressure will increase thedrilling speed and efficiency, but that’s sim-ply not true. Finding the proper feed pressureis the best way to ensure maximum efficien-cy, and also to prevent unnecessary damageto drill bits and the drill itself. This greatlyminimizes downtime for replacements, aswell as costs for new bits or more significantrepairs to the drill.Whether using an on-grade, slab-rider or
equipment-mounted drill, each has virtuallythe same process for setting and adjustingfeed pressure. Feed pressure varies based onthe drill and application, so there’s not a spe-cific setting that’s going to work for all sce-narios. The best approach is to set a logicalstarting point and then adjust as neededbased on the results. Most manufacturersrecommend a starting point between 18 to25 psi for horizontal drilling applications.From there, the operator simply needs towatch the machine’s performance and adjustif necessary. For example, if the drill is “bouncing” on
the concrete’s surface rather than drillinginto it, the pressure is too weak and the oper-ator needs to increase it. Conversely, if thepressure is too great, the bit’s rotation willslow down or even stop. In this case, adjustthe pressure down until normal rotationresumes. Most drills have an easily
adjustable regulator knob that simply needsto be turned one way or the other to adjustpressure up or down. On job sites with multi-gang drills, it’s
recommended to go through this process onedrill at a time. After proper adjustments havebeen made to each individual drill, they canbe run simultaneously. However, afterthey’re all turned on simultaneously for thefirst time, it’s also the first time they’re allbeing run off the same air compressor, soslight adjustment may be needed to be surethey’re all still receiving adequate pressure. Some on-grade and slab-rider drills can be
converted to vertical drilling and there alsoare specific models designed just for thisapplication. In the case of vertical drilling,the same process can be used with a minoradjustment. Feed pressure should be reducedanywhere from about 5 to 9 psi from thestart, then adjusted up only. This is a com-mon safety precaution because, if the pres-sure is set too high, the drill can tip over. Keep in mind the two factors that affect
ideal feed pressure before the bit ever meetsthe concrete: drill bit size and the hardness ofconcrete. It’s important to remember thiswhen the drill is moved from one job site tothe next. What worked for one airport laneaddition may not be ideal for another one ina different setting. Again, it all goes back tomonitoring performance and adjusting pres-sure as needed.Another key to achieving optimal opera-
tion and minimal stress on the drill is a rela-tively simple concept: every drilling applica-tion should be approached in a series ofstrategic steps.
Keeping Things in OrderImagine a homebuilding project. The only
way to succeed is to follow a proper series ofsteps. Pour the foundation, put the framing inplace, put up the drywall and, finally, installthe fixtures. Mess with the sequence and theproject won’t make it very far. Similarly,there’s a proper sequence for before and afterdrilling. Following it prevents damage to thedrill and components and makes a successfulproject more likely.
Spawling is a great example of an issueone can avoid with proper pre- and post-drilling procedures. This common problemresults in excess concrete chipping awayfrom the hole area. While some spawling isnatural in a concrete drilling application, fol-lowing the proper sequence will keep it to aminimum and is the best way to avoid anyissues with inspectors.In addition, both the pre- and post-hole
techniques help to prevent dry-firing, a situ-ation in which the drill is in operation butthere’s no pressure on the bit. Dry-firingadds unnecessary stress to the drill and candamage its trunnion bolts. Every bit has alatch, which is held in place by a trunnionbolt. The stress dry-firing places on the drillcan eventually cause the bolt to break. Withproper operation, a trunnion bolt can last theentire lifetime of the drill. At around $80apiece, it isn’t a part most operators want toreplace frequently, if ever.Whether it’s for a single hole or set of
holes, the first step is to properly position thedrill along the designated area of a slabwhere holes are to be drilled. Next, feed thedrill. Place it against the concrete and movethe feed control valve to the “In” position.When the bits make initial contact with theconcrete, place the main power switch in the“On” position and the drill will begin oper-ating.After the drill has reached its desired
depth, it’s crucial to turn it off immediatelyto prevent dry-firing. Then, there’s a properremoval sequence to follow as well. Prior totaking the drill out of the hole, stop the drillby moving the main power switch to the“Off” position. Do the same for the feed con-trol valve and that will cause the drill toretract. Occasionally, the drill bit canbecome stuck in the hole and make it diffi-cult or impossible to retract the drill. If that’sthe case, simply turn on the power valve.This will allow the bit to rotate enough thatit should easily begin to retract. At that point,shut off the valve. If a drill has an auto alignswitch, it’s wise to place it in the “Up” posi-tion before fully pulling it away to move to
see DRILL page 48
Pages 47-49
Page 48 • February 2, 2013 • www.constructionequipmentguide.com • Attachments Section • Construction Equipment Guide
Doosan DXB260H BreakerFeatures Two-Speed ControlThe Doosan DXB260H hydraulic breaker
features two-speed control of breaker fre-quency for improved efficiency in demand-ing demolition and rock-breaking applica-tions. Delivering up to 600 blows per minute,
the 5,400-lb. (2,500 kg) DXB260H isdesigned for use with excavators in the 30 to41 ton (27 to 37 t) weight range, specificallythe Doosan DX300LC and DX350LC.Rated in the 8,000 ft.-lb. impact energy class,the DXB260H requires a hydraulic flow rateof between 39.5 and 63.5 gal. (149.5 to 240L) per minute.With two speeds, the DXB260H breaker
frequency can be adjusted between short andlong stroke settings. This allows the operatorto match the breaker frequency to the groundconditions for optimized productivity.Standard features include a cradle-mount-
ed grease station and blank fire protection.The cradle-mounted grease station deliverscontinuous grease flow, reducing bushingand tool wear while minimizing mainte-
nance costs and downtime. Blank fire pro-tection uses a cushion of oil at the base of thecylinder to reduce metal-to-metal contact.The breaker’s suspension system extends
excavator workgroup life by absorbingharmful vibrations and stress waves. Also,the valve design reduces hydraulic pressurepeaks that can reduce pump life, crack exca-vator workgroup welds and cause systemoverheating. Finally, an energy recovery sys-tem on the DXB260H increases strike powerby using energy generated by pistonrebound, according to the manufacturer.The DXB260H breaker comes with a
mounting cap, auxiliary hydraulic hoses,cradle-mounted greaser, two moil points,toolbox and a nitrogen checking device. Aone-year warranty is standard.In addition to the general purpose moil,
tools available for the DXB260H include ablunt tool, a chisel and a pyramidal or “nail”tool.For more information, visit
www.doosanequipment.com.
With two speeds, the DXB260H breaker frequency can be adjusted between shortand long stroke settings. This allows the operator to match the breaker frequencyto the ground conditions for optimized productivity.
Safety, Efficiency Depend on Proper Drill Operationthe next location. This slightly raises the drillaway from the concrete. When the drill hasbeen moved and placed in its next location,move the auto align switch to the “Down”position and repeat the sequence.Some operators neglect to turn off the drill
before removing it from the hole and otherseven leave it running when moving to a newlocation. While it’s tempting to skip theproper steps in an effort to save time, it’s notsafe and will end up causing moreheadaches.Safety is one area on the job site where
there’s no room for compromise. As withany major piece of machinery, dowel drillshave their own set of safety guidelines thateveryone on site needs to follow.
Safety NotesDowel drilling isn’t a dangerous process.
However, as with any piece of equipment,negligent operation or a complete disregardfor safe practices can create serious hazards.Just like ignoring proper operationalsequences, ignoring safe operation practicesmay put more than just the operator in jeop-ardy; it also can lead to a damaged drill orcomponent.
Begin with the basics, proper work attire.Workers should wear earplugs to preventdamage from drill and air compressor noise.Debris flies during drilling, so the operatorand other workers on the site must wearsafety glasses and hardhats, as well. Concrete dust is often emitted during the
process too, so dust masks are a must-havefor all on site workers. But concrete dust canpose other risks too. If large amounts areemitted, the dust can cloud a site and createa low-visibility environment for workers or,worse, for nearby live traffic. To help mini-mize dust emissions, many companies offerpneumatic drills with dust suppression kitsor dust collection systems. Dust suppressionkits include a spray nozzle, which attaches toeach drill system and sprays water on the bitas it’s drilling. A dust collection system runson the same compressor as the drill and vac-uums dust as it’s emitted. The system’s dustcollection head typically mounts to the endof the bit guide, where the bit penetrates theconcrete. The vacuum draws out duststraight from the hole and into the collectionbag. Both systems keep airborne dust andrelated hazards to a minimum. A few areas of the drill pose specific dan-
ger to operators. Every drill has pinch points
where fingers, hands or limbs can becomecaught. A primary example is the carriageassembly. Keep clear of the carriage assem-bly to avoid being caught between the car-riage and frame. When moving a drill, besure the carriage lock is set to prevent theassembly from sliding onto fingers andhands. Furthermore, improperly moving a drill
can cause operator strain or a serious acci-dent. When moving a drill on the ground,operators should use the unit’s designatedhandles. If the drill is lifted improperly, itcould cause a strained back or other muscleand joint problems. If a drill needs to bemoved a greater distance, a lifting devicemight be necessary. In this case, use a prop-erly weight-rated strap or chain and attach itto the drill’s lifting bale. Be sure the carriagelock is in place. Compressed air is required to run a pneu-
matic drill and the great pressure can posesafety issues. The operator should monitorthe air compressor’s gauge to be sure pres-sure doesn’t inch up too high. If the pressureis too high, it can damage the drill. This mayvoid the warranty altogether, but even moredetrimental is the lost productivity as a resultof downtime. Additionally, before moving,
disconnecting the air hose or any parts ordisassembling the unit, the operator mustfirst shut off the air supply and bleed off anyair in the system. Taking just a few minutesto do so will help eliminate potential injuries. One final note to ensure efficient opera-
tion and long drill life is perhaps the simplestof all — keep the drills clean. At the end ofeach workday, use the air compressor toblow off all dust and debris from the drills.While it doesn’t seem like much, it can payoff greatly. Doing so prevents cloggingissues and excessive dust build-up. In theevent of rain, any dust accumulated willquickly harden to concrete when it dries. Ifchoosing to pressure wash the drills post-operation, be sure to dry thoroughly to pre-vent any potential concrete accumulation.No matter the project size, timeline or
logistics, the need for correct drill operationis one component of a job that’s always aconstant. Proper operation isn’t difficult orcomplicated, it simply boils down to a fewbest practices. The small investment of timeand thought pays back large dividends in jobsite safety and productivity. And, ultimately,the result is a piece of equipment that costsless to own and offers more years of reliableservice.
DRILL from page 47
Construction Equipment Guide • Attachments Section • www.constructionequipmentguide.com • February 2, 2013 • Page 49
®
visit: www.digrock.come-mail: [email protected]
call to order:866-928-5800 or 508-829-4855
"Leader in Excavator Rock Ripping Attachments"eadingdge
ttachments,
Inc.
Multi-ply Your Money!®
with theexcavator
rock rippingMulti-Ripper
Multi-Ripper Bucketor the
Multi-Ripper BucketMulti-Ripper
TM
"the greatestadvancement I have seenfor excavating rock!" Ronnie Lewis, Lewis Contractors, Inc.
Maximize forceone tooth at a time,using our patented
"Shanks on an Arc"technology.
Rip the Rockinstead of Blastingor Hammering
Hi-CapMulti-Ripper
Bucket
Multi-Ripper
6 to 9 times the forceof a standard 5 tooth bucket 4 times faster than a hammerRips the sides and bottom of thetrench flat, with no depth limitation
Celebrating our 10th YearDesigning Innovative Products
Made In USA!
PROVIDING SUPERIOR PRODUCTS & SUPPORT SINCE 1996
ASK ABOUT OUR BREAKER AUTOLUBE SYSTEMS!
ESCO Corporation Debuts NewPosiGrab Hydraulic CouplerESCO Corporation, a global
provider of wear parts andattachments for the mining andconstruction industries, hasdeveloped a new hydraulic cou-pler that gives machine operatorsa simple connection to attach-ments and provides enhancedsite safety.The ESCO PosiGrab coupler
features both front and rear locksthat are mechanically engagedthrough the full working cycle.The natural position of the cou-pler is locked and only opensusing forced hydraulic pressure.The connection and release of
an attachment, including thevisual confirmation that the lock-ing mechanisms are engaged, isdone without the operator leav-ing the safety of the cab.Along with the safety and
ease-of-use benefits, PosiGrabcoupler was engineered to reducestress on attachments andmachines.
The ESCO PosiGrab coupler features both frontand rear locks that are mechanically engagedthrough the full working cycle.
Grouser Products’ V3 FlexPlane, is the lat-est in a series of heavy duty, contractor-gradeattachments. Grouser’s V3 FlexPlane isdesigned to attach to any make and model ofskid steer. • Featuring a pivoting action, the heavy-
duty V3 FlexPlane features a self-adjustingblade that rotates to contour to uneven terrain. • Designed for high productivity, the V3
FlexPlane features two double-beveled hard-ened cutting edges. • Built with heavy-duty, contractor-grade
materials and components, the V3 FlexPlaneis designed for low maintenance and longproduct life. • The V3 FlexPlane is offered in five mod-
els of varying length. Available sizes are 72-,78-, 84-, 89-, and 96-in. (183, 198, 213, 226and 244 cm). Based in West Fargo, N.D., Grouser
Products provides a full line of heavy dutydozer and belly blades, as well as an extensiveseries of over-the-tire tracks and track parts. For more information, call 800/747-6182
or visit www.grouser.com.
Grouser Products Launches V3FlexPlane Designed to Fit Any Skid Steer
Designed for high productivity, the V3 FlexPlane features two dou-ble-beveled hardened cutting edges.
Page 50 • February 2, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
LET’S LIFTTHE WORLDTOGETHER
CRANES
Truck Mounted CranesRoad Mobile Cranes Crawler Cranes Rough Terrain Cranes Port EquipmentTower Cranes Specialized Cranes
Let our team of Crane Specialistshelp you succeed
Contact us to learnhow we can work for you.www.terexcranes.com
LET’S LITH
LET’S LIOE W
TFLET’S LILDRO
SENARC
THTOLet our team of Crane Specialists
OE WETHG
Let our team of Crane Specialists
LDROREETH
Let our team of Crane Specialists
help you succeed
Meeting customer needs witha full range of cranes
Combining our diverse expertise
help you succeed
Meeting customer needs witha full range of cranes
Combining our diverse expertise
Meeting customer needs with
Combining our diverse expertise
to deliver customer solutions
Committed to delivering responsive global support
s ut catnoCace ww oh
to deliver customer solutions
Committed to delivering responsive global support
nraelo ts uoyr ofk rown a
to deliver customer solutions
ace ww ohwww.terexcranes.com
.uoyr ofk rown awww.terexcranes.com
senarCR
se
se
se
Copyright Terex Corporation 2
Copyright Terex Corporation 2012 Terex is a registered trademark of Terex Corporation in the United States of America and many other Countries
2 Terex is a registered trademark of Terex Corporation in the United States of America and many other Countries
2 Terex is a registered trademark of Terex Corporation in the United States of America and many other Countries
2 Terex is a registered trademark of Terex Corporation in the United States of America and many other Countries
For Your Local Terex Dealer, Please Contact:
Waverly Operations106 12th Street S.E.
Waverly, IA 50677 USAPhone: (319) 352-3920Fax: (319) 352-9395
email: [email protected]: http://www.terex-cranes.com
RTL Equipment Inc.3000 SE Gateway Drive
Grimes, IA 50111515-986-0262
Fax: 515-986-0267
2601 120th St. NWSwisher, IA 52338319-857-4045
Fax: 928-441-1269
Custom Truck & Equipment7701 Highway 24
Kansas City, MO 64125800-861-1065
www.cte-equipment.com
All Erection & Crane Rental Corp.4700 Acorn Dr.
Independence, OH 44131800-232-4100
Fax: 216-642-7633www.allcrane.com
BRANCH LOCATIONSAll Crane Rental of PA, LLC
Pennsylvania412-382-4200
All Crane & Equipment Rental Corp.West Virginia304-766-0300
Dawes Rigging & Crane Rental, Inc.Wisconsin
414-453-5335
Jeffers Crane Service, Inc.Michigan
419-693-0421
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 2, 2013 • Page 51
Built from a lineage of market leaders for over 60+ years
ILLINOISBIRKEY'S CONST.
EQUIPMENTconstruction.birkeys.com
Galesburg(309) 341-4360Bloomington
(309) 827-0520Mattoon
(217) 235-3158Urbana
(217) 337-1781
DIAMOND EQUIPMENTwww.diamondequipment.com
Mt. Vernon(618) 242-2273
ILLINOISWEST SIDE TRACTOR SALESwww.westsidetractorsales.com
Naperville(630) 355-7150
Rockdale(815) 730-9011
Rockford(815) 961-3160South Holland(708) 331-6362
Wauconda(847) 526-7700
MINNESOTAZIEGLER CAT
www.ZieglerCAT.comMinneapolis
(800) 352-2812Brainerd
(877) 829-9850Buhl
(800) 446-9795Columbus
(866) 982-5656Crookston
(800) 422-5782Duluth
(800) 421-3831Fergus Falls
(800) 346-7649Jackson
(866) 847-6401
MINNESOTAZIEGLER CATMarshall
(800) 325-4929North Mankato(877) 845-3938
Rochester(800) 247-1068
Shakopee(800) 352-2812
St. Cloud(800) 522-9469
WISCONSINMILLER-BRADFORD
& RISBERG INC.www.miller-bradford.com
Madison800-585-7219Eau Claire
800-585-7232DePere
800-638-7448Abbotsford
888-886-4410
MISSOURIFABICK CAT
www.fabickcat.comFenton
(636) 343-5900Fenton
(rental services)(636) 343-5905Cape Girardeau(573) 332-1122
Columbia(573) 442-6880
Foristell(800) 539-9217Jefferson City(573) 636-3184
Joplin(417) 624-3010Springfield
(417) 866-6651Springfield
(rental services)(417) 866-2100
INDIANADIAMOND EQUIPMENT
www.diamondequipment.comEvansville
(812) 425-4428
MACALLISTER MACHINERYSALES/RENTALS
www.macallister.comIndianapolis
(317) 545-2151Indianapolis
(317) 244-RENT (7368)Fort Wayne
(260) 483-6469 (heavy equip.)
(260) 969-3322 (rental store)Lafayette
(765) 449-8191 (heavy equipment)(765) 446-5600 (rental Store)
INDIANAMACALLISTER MACHINERY
SALES/RENTALSTerre Haute
(812) 478-3155(heavy equipment)
(812) 231-6000 (rental store)South Bend
(574) 288-6622Washington
(812) 254-1712Bicknell
(812) 735-0286Bloomington
(812) 349-9220Fishers
(317) 598-9700Greensburg
(812) 663-5829Richmond
(765) 966-0626Yorktown
(765) 759-2CAT (2228)
IOWAZIEGLER CAT
Altoona800-342-7002
Atlantic877-547-3819Sioux City
712-252-4401Fort Dodge
800-342-1848Mason City
800-342-1849Postville
800-526-0889
KENTUCKYDIAMOND EQUIPMENT
www.diamondequipment.comBowling Green(270) 781-1061
OHIO CATwww.OhioCAT.com
Richwood(888) 446-4658
WILSON EQUIPMENT CO.www.wilsonequipment.com
Corbin(606) 528-0700
Lexington(859) 254-6443Prestonsburg(606) 874-8036
MICHIGANMILLER-BRADFORD
& RISBERG, INC.www.miller-bradford.com
Negaunee800-562-9770
OHIOOHIO CAT
www.OhioCAT.comBroadview Heights(800) 837-6200Sharonville
(888) 332-4658 (Sales & Service)
(888) RENT-441 (Rental)Columbus
(888) 441-4658 (Sales &Service)
(888) RENT-441 (Rental)Perrysburg
(888) 339-4658 (Sales & Service)
(888) RENT-441 (Rental)
OHIOOHIO CAT
Troy(888) 330-4658Youngstown
(800) 837-6203Cadiz
(800) 837-6204Canton
(800) 837-6207Zanesville
(800) 837-6205N. Canton
(888) 736-8443Oakwood Village(800) 633-1020
Page 52 • February 2, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
$700 Million Job Includes Almost 40 Smaller ProjectsThe main span contractor is a joint ven-
ture between Massman of Kansas City, Mo.,Traylor Brothers of Evansville, Ind., andAlberici of St. Louis, Mo. The project includes a cable stayed bridge
between St. Clair County, Ill., and St. Louis,Mo., and the realignment and reconstructionof Interstate 70 and numerous local roads onboth sides of the state line.According to Gate, the project includes
the following key components: MissouriNorth I-70 Interchange; a roadway connec-tion between the existing I-70 and the newbridge, with further connections to the localstreet system at Cass Avenue at St. Louis; anIllinois I-70 connection; a roadway connec-
tion between the existing I-55/64/70 Tri-Level Interchange and the main span; anIllinois Tri-Level Interchange; and improve-ments at the I-55/64/70 Tri-LevelInterchange in East St. Louis, which willconnect to the I-70 connection leading to themain span.“Working on a river bridge, especially a
river bridge over the Mississippi River, isalways challenging,” said Horn. “Early in the project, we lost several
months of construction because the riverwas flowing at or above flood stage. Wecouldn’t safely stage our construction equip-ment for the initial foundation work. Now,less than four years later, we are experienc-ing exceptionally low water levels. Thatmeans that our contractor has to continuallyadjust their process to complete installingsections of the deck and the superstructure.”Challenging projects often also have
some unique aspects, as well.“One unique element is building an icon-
ic landmark about a mile away from anotherSt. Louis iconic landmark, the GatewayArch,” Horn said. “This meant that as we went through the
design process, we had to make sure that thenew bridge’s design complemented, and inno way overshadowed, the Arch. Anotherunique element we had to deal with was therock strength under the river bed. Our con-tractor suggested an alternate method of con-structing the drilled shaft foundation for thebridge, based on special equipment they had.Our contractor proposed to install a test shaftto prove that their design would meet thestrength requirements for our foundation.The test shaft maxed out the test equipment,and set a world record for drilled shaftstrength.”The main span construction includes
12,152,790 lbs. (5,512,413 kg) of reinforc-ing steel in the entire job. Each tower, includ-ing footing and shafts, contains 4,442,530lbs. (2,015,098 kg) of reinforcing steel.There is a total of 16,367,840 lbs. (7,424,327kg) of structural steel.The tower height is 400 ft. (122 m), and
each tower contains 7,768 cu. yds. (5,939 cum) of concrete. In addition, each footing hasnearly two million lbs. of reinforcing steel,and required 3,600 cu. yds. (2,753 cu m) ofconcrete. This required 400 trucks to pourcontinuously over a day and a half. With a main span of 1,500 ft. (457 m), the
bridge will be the third largest cable stayedbridge in the United States. It will require600 mi. (966 km) of cables, which is enoughto stretch between St. Louis and Kansas Cityand back. Currently, large equipment on site for the
main span construction includes aManitowoc 7000 ringer barge mountedcrane; two Manitowoc 2250 track cranes,one on a barge and one on land; one LeibherrLR1300 track crane on land; twoManitowoc 4100 track cranes on barges, twogrove rubber tire cranes, two FabCo towercranes (one on each tower), and two tug-boats.Throughout the job, additional
Manitowoc cranes were used for short dura-tions. This included a 4100 Ringer, a 3900, a4,000, and two additional 2250s.Contractors on associated projects include
Millstone Bangert, Fred Weber, Keeley andSons, Kilian, Baxmeyer, Hanks Excavatingand Landscaping, Petroff TruckingCompany Inc., Insituform Technologies,Hayden Wrecking, Moniger Excavation,Halverson, and Mason Landscaping.
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)CEG
Missouri and Illinois Departments of Transportation photoCrews connect the conduit to the driving surface.
Missouri and Illinois Departments of Transportation photoThe project includes a cable stayed bridge between St. Clair County, Ill., and St.Louis, Mo., and the realignment and reconstruction of Interstate 70 and numerouslocal roads on both sides of the state line.
MODOT from page 1
Missouri and Illinois Departments of Transportation photoA huge project involving the Mississippi River Bridge is headedtoward completion next year.
Missouri and Illinois Departments of Transportation photoThe main span contractor is a joint venture betweenMassman of Kansas City, Mo., Traylor Brothers ofEvansville, Ind., and Alberici of St. Louis, Mo.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 2, 2013 • Page 53
Howell Tractor2770 May Road • Peru, IL 61354
800/342-6072Fax: 815/224-2538
480 Blaine Street • Gary, IN 46406800/852-8816
Fax: 219/977-4220
Illinois Truck & Equipmentwww.iltruck.com
320 Briscoe Drive • Morris, IL 60450815/941-1900
Fax: 815/941-1486
Mid Country Machinery3478 5th Ave South (Bus. Hwy 20)
Fort Dodge, IA 50501800/206-5936
4734 Sergeant Rd. (Hwy 63)Waterloo, IA 50701
319/234-8710
106 8th Street • Sergeant Bluff, IA 51054712/943-4470
Custom Truck & Equipmentwww.customtruckandequipment.com
7701 E. 24 Highway • Kansas City, MO 64125800/861-1065816/241-4888
Fax: 816/241-8826
2121 Stephens Blvd. • Joplin, MO 64804417/659-8969
Fax: 417/659-8871
Kelbe Brothers Equipment Co., Inc.www.kelbebros.com
12770 W. Silver Spring Drive • Butler, WI 53007262/373-2151
Fax: 262/373-2102
4621 Dutch Mill Rd. • Madison, WI 53716608/221-8300
Fax: 608/221-0610
Page 54 • February 2, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
STAR EQUIPMENT LTD.1401 2ND AVENUE
DES MOINES, IA 50314(515) 283-2215
FAX: (515) 283-0295(800) 369-2215
2625 W. AIRLINE HWY.WATERLOO, IA 50703(319) 236-6830
FAX: (319) 236-6834(800) 791-9249
2950 6TH STREET SWCEDAR RAPIDS, IA 52404
(319) 365-5139FAX: (319) 365-6726(800) 728-5139
2100 E. LINCOLN WAY
AMES, IA 50010(515) 233-9500
FAX: (515) 233-9505(866) 856-2312
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 2, 2013 • Page 55
www.kubota.com©Kubota Tractor Corporation, 2008
Construction Equipment From the Ground Up.
2216 N. Green Bay Rd.Waukegan, IL 60087
847/336-1205Fax 847/336-2697
27939 W. Concrete Dr.Ingleside, IL 60041
815/363-4100Fax 815/363-4109
10351 W. Laraway Rd.Frankfort, IL 60423
815/464-6650Fax 815/464-6951
Burris Equipment Co.Anoka, MN
888/448-5266753/323-1720Shakopee, MN877/753-6100952/445-6310
Corcoran, MN888/479-4342763/479-8200
Lano Equipment, Inc.1801 E. University Ave.Urbana, IL 61802
800/798-1772Fax: 217/337-1775
2900 E. Jackson St.Macomb, IL 61455
888/360-9225
200 North St.Prophetstown, IL 61277
877/221-0881
Birkey’s Construction Equipment124 N. Schmale Rd.Carol Stream, IL 60188
630/510-6050Fax 630/510-6051
1305 Sentry DriveWaukesha, WI 53186
262/521-5802Fax 262/521-5801
1st Choice Equipment LLC
Page 56 • February 2, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
BRANDEIS MACHINERY & SUPPLY COMPANYwww.brandeismachinery.com1801 Watterson Tr.Louisville, KY 40299502/491-4000502/499-3195 Fax Evansville, IN812/425-4491812/425-1171 Fax Corbin, KY606/528-3700606/528-9014 Fax Lexington, KY859/259-3456859/254-0783 Fax Stanville, KY606/478-9201606/478-9208 Fax Paducah, KY270/444-8390270/575-4907 Fax Indianapolis, IN317/872-8410317/872-8417 Fax Ft.Wayne, IN260/489-4551260/489-1620 Fax
CONTINENTAL EQUIPMENT CORP.A division of AISwww.aisequip.com3600 N. Grand River Ave.Lansing, MI 48906517/321-8000Fax: 517/321-4191
ROAD MACHINERY & SUPPLIES CO.www.rmsequipment.com5633 W Hwy 13Savage MN 55378952/895-9595800/888-9515Duluth, MN 218/727-8671800/888-9535Virginia MN218/741-9011800/752-4304Des Moines IA218/741-9011800/555-1445Sioux City IA712/252-0538800/633-9104Cedar Rapids IA319/363-9655800/616-6615Milan, IL309/787-1742800/633-9114
ROAD BUILDERSMACHINERY & SUPPLY CO., INC.1001 S. 7th St. TrafficwayKansas City, KS 66105913/371-3822913/371-3870 FaxOmaha, NE402/331-9200Lincoln, NE402/325-0447Grand Island, NE308/384-2620
Nortrax Names Tim Murphy CEO,President; Announces Promotions
Tim Murphy. Dale Gessell. Chip Cramer. Tim J. Murphy.
Nortrax recently made several alterations in employeepromotions:Tim Murphy is appointed president and CEO of Nortrax
Inc., effective Jan. 16. Murphy will replace Timothy J.Murphy. Murphy began his career with Nortrax in 2000 as vice
president and general manager of the midwest region.During his tenure, the midwest region consistently deliveredgood market share and profitability results, and he providedgreat leadership to that midwest team, according to the com-pany. Prior to joining Nortrax,
Murphy spent 23 years inheavy equipment sales,marketing and serviceactivities. He held key man-agement positions at thebranch, district, nationaland international levels forleading manufacturing anddistribution companies,with a particular emphasison forestry equipment.Effective Jan. 16, Dale
Gessell was appointedregional vice president ofNortrax’s midwest region.Gessell will be replacingTimothy J. Murphy. Gessell started his career with a John Deere dealership in
1987 working part-time while attending school; he was hiredfull-time in 1991 as an inside sales manager with NorthCountry Equipment. The past 13 years Gessell has been thegeneral manager of three branch locations in Minnesota.During this time, these branches have consistently deliveredmarket share and profitability results, within the top rankingsof Nortrax North America, according to the company.Chip Cramer was appointed general manager of the
Minnesota branches in Bemidji, Grand Rapids and Duluth,
effective Jan. 16. Cramer will be replacing Dale Gessell. Cramer spent four years in the Air Force and has spent the
last 25 years working within the construction and forestrybusiness. He started in the business working for N.C.Machinery in Juneau, Alaska, in 1988. Cramer started withNortrax in 2001 as a territory manager and then moved toinside sales, where he has spent the last 10 years.Timothy J. Murphy was appointed global director, Sugar
Product Line effective Jan. 16. In this position Murphy willlead the efforts to drive growth in shareholder value added
(SVA) within the sugarcane harvesting businessglobally. He also will con-tinue collaboration with theWorldwide Construction &Forestry (C&F) Division tomanage important supplyrelationships in landscapeloaders and scrapers.Murphy joined Deere &
Company in 1996 as a sen-ior financial analyst in thetreasury department.Throughout his career hehas held a number of posi-tions of increasing respon-sibility in the constructionand forestry division, aswell as in business develop-
ment and the treasury department at Deere & Company.Murphy has held the positions of vice president and chieffinancial officer of Nortrax Inc., director, finance andaccounting-South America, and director, strategic planningand business development of the agricultural division. Mostrecently, Murphy has been president and CEO of Nortrax forC&F.Murphy is replacing Craig Fawcett who is leaving the
company to pursue other opportunities with his family busi-ness.
Prior to joining Nortrax, TimMurphy spent 23 years inheavy equipment sales,marketing and serviceactivities.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 2, 2013 • Page 57
Efficient Komatsu Tier 4 Interim engine and automatic shift transmission with lockup torque converter maximize productivity while saving fuel.PLUS (long life) undercarriage is standard, further reducing our already low operating costs.Komatsu CARE provides complimentary Tier 4 maintenance, including KDPF exchange filters. Contact your Komatsu distributor for details.
Komatsu has once again made a great machine even better. The new D65-17 increases productivity and operator comfort while lowering operating costs. All designed to improve your bottom line.
D65-17 From Komatsu – The Dozer Experts
www.komatsuamerica.com
.komatsuamerica.comwww
.komatsuamerica.com
ROLAND MACHINERY CO.www.rolandmachinery.com816 N. Dirksen Parkway,Springfield, IL 62702217/789-7711Bolingbrook, IL630/739-7474Carterville, IL618/985-3399Marengo, IL815/923-4966Portage, IN219/764-8080Escanaba, MI906/786-6920906/786-5813 Fax Bridgeton, MO314/291-1330Cape Girardeau, MO573/334-5252Columbia, MO573/814-0083Palmyra, MO573/769-2056DePere, WI920/532-0165920/532-0526 Fax DeForest, WI608/842-4151608/842-4193 Fax Eau Claire, WI715/874-5400715/874-5401 Fax Franksville WI 262/835-2710262/835-2844 Fax Schofield, WI715/355-9898715/241-0044 Fax
GENERAL EQUIPMENT & SUPPLIESwww.genequip.com4300 W Main AveFargo ND 58103800/437-2924701/364-2190 Fax 905 20th Avenue SEMinot ND 58072800/825-04792300 Vermont AvenueBismarck ND 58504800/279-4437
Page 58 • February 2, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 2, 2013 • Page 59
Powering Your Productivity...For Over A Century
Portable Power
©2013 Doosan Infracore Portable PowerFind Us on DoosanPortablePower.com (800) 633-5206 Follow Us on
Aspen Equipment Co.
9150 Pillsbury Ave. SBloomington, MN 55420
(952) 888-2525
McAllisterEquipment Co.
150 E. North Ave.Villa Park, IL 60181
(630) 530-7600Alsip/Chicago, IL(708) 389-7700
E. Peoria, IL(309) 694-4455
Rockford, IL(815) 227-0555Springfield, IL
(217) 789-0351
4670 Crossroads Industrial DriveBridgeton, MO
(314) 291-1330Cape Girardeau, MO
(573) 334-5252Columbia, MO
(573) 814-0083Palmyra, MO
(573) 769-2056Carterville, IL
(618) 985-3399
DePere, WI(920) 532-0165
DeForest, WI(608) 842-4151
Eau Claire, WI(715) 874-5400Franksville, WI
(262) 835-2710Schofield, WI
(715) 355-9898Escanaba, MI
(906) 786-6920
9200 Liberty DriveLiberty, MO 60468
(816) 781-8070Springfield, MO(417) 865-0505
Wichita, KS(316) 943-1231
Great Bend, KS(620) 792-1361
Liberal, KS(620) 624-7274
Salina, KS(785) 825-8291
Colby, KS(785) 462-8211
Roland Machinery Co. Central Power Systems & Services
Page 60 • February 2, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
www.kubota.comOptional equipment may be shown.
©Kubota Tractor Corporation, 2010
Now available with a pressurized comfort cab. Schedule your Kubota SVL Series demo today.
ARNOLD’S OF KIMBALLwww.arnoldsinc.com701 State Hwy 55 EKimball, MN 55353
320/398-3800Fax: 320/398-6900
ARNOLD’S OF MANKATOwww.arnoldsinc.com
1715 Howard DriveNo. Mankato, MN 56003
507/387-5515Fax: 507/387-6449
BURRIS EQUIPMENT CO.www.burrisequipment.com2216 N. Green Bay Rd.
Waukegan, IL 60087847/336-1205
Fax: 847/336-2697
27939 W. Concrete Dr.Ingleside, IL 60041
815/363-4100
10351 W. Laraway Rd.Frankfort, IL 60423
815/464-6650
WEINGARTZ SUPPLY [email protected]
39050 Grand River Ave.Farmington Hills, MI 48335
248/471-3050
6585 Dixie Hwy.Clarkston, MI 48346-3421
248/620-5258
46061 Van Dyke Ave.Utica, MI 48317586/731-7240
BIRKEY’S CONSTRUCTIONEQUIPMENT
1801 E. University Ave.Urbana, IL 61802800/798-1772
Fax: 217/337-1775
6140 Highway 10Anoka, MN 55303888/448-5266
3021 133rd St. SWShakopee, MN877/753-6100
23580 Mn-5Loretto, MN888/479-4342
NIEBUR TRACTOR &EQUIPMENT, INC.
www.nieburtractor.comHastings, MN888/839-6860
LANO EQUIPMENT INC.www.lanoequip.com HAUG-KUBOTA, LLC.
www.haugkubota.comEast Highway 123585E. Hwy 12
Willmar, MN 56201320/235-2717
Fax: 320/235-2771
CONSTRUCTION�EQUIPMENT�GUIDE�•�www.constructionequipmentguide.com�• February�2,�2013�•�Page�61
Built to performGrove mobile telescopic cranes
range in capacity from 8t to 450t (8.5 USt to 550 USt)
Grove cranes
Contact your dealer or visit www.manitowoc.com/cranesdealer
Built to pere mobile telescopic cranesovGr
ofBuilt to pere mobile telescopic cranes
rmoe mobile telescopic cranes
ough-terrain and tre all-terrain, rvorGformance featurigh perH
ecision and contrength, prstr
ur cranes o�er the vO
5t to 50t (8.5 US5to 4
e long-lasting and haruck cranes arough-terrain and tren the most challenging lifting jobs with ecute eves help exformance featur
ol. ecision and contr
oject, with capacities ranging frersatility to tackle any prur cranes o�er the v
t).0 US5
king. d-wore long-lasting and haren the most challenging lifting jobs with
om 8t oject, with capacities ranging fr
range in capacitye cranesovGr
( from 8t
range in capacitye cranes
t to 450t
Contact y
12920 Gravois RoadSt Louis, MO 63127
314/729-0125
12321 E. Pine StreetTulsa, OK 74116918/438-1700
6715 W. RenoOklahoma City, OK 73127
405/495-7820
Kansas City, KS913/850-6300877/851-5729
Cleveland Crane & Shovel Sales, Inc.26781 Cannon RoadCleveland, OH 44146
440/439-4749800/362-8494
Fax:�440/439-2177
www.craneandshovel.net
930 W 138th StreetRiverdale, IL 60827
708/656-7700Fax: 708/532-127325210 Brest RoadTaylor, MI 48180734/947-9250
Fax: 734/947-9260
920 S State Road 39Lebanon, IN 46052765/482-4145
Fax: 765/482-49282126 Glenview DriveEvansville, IN 47720
812/422-6912Fax: 812/422-6982
Aspen EquipmentCompany
www.aspenequipment.com1525 S.E. Cortina Dr.Ankeny, IA 50021515/965-1000
Fax: 515-965-179011475 S. 153rd St.Omaha, NE 68138402/894-9300
Fax: 402-894-9302
Kirby Smith Machinery Inc. Walter Payton Power Equipment LLC
Page 62 • February 2, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Diamond Equipment Inc.2300 Cassens DriveFenton, MO 63026
(636) 343-9970www.lubyequipment.com
199 Airport Rd.Cape Girardeau, MO 63702
(573) 334-9937
4375 Camp Butler Rd.Springfield, IL 62707
(217) 744-2233
2625 North 24th St.Quincy, IL 62305 (217) 222-5454
8853 Petrov DriveCaseyville, IL 62232
(618) 397-9971
4100 Gardner Ave.Kansas City, MO 64120
(816) 241-9290(816) 241-1738www.vlpco.com
Joplin, MO(800) 878-8223(417) 781-8222
Springfield, MO(800) 955-2729(417) 887-2729
Wichita, KS(800) 878-3346(316) 838-3346
Topeka, KS(800) 878-4345(785) 267-4345
Garden City, KS(800) 511-1435(620) 275-1996
1060 E. Diamond Ave.Evansville, Indiana
47711(812) 425-4428(800) 258-4428
Fax: (812) 421-1036www.diamondequipment.com
2000 Harlan DriveTerre Haute, IN 47802
(812) 299-4747(888) 343-4747
Fax: (812) 299-3687
17035 N. Illinois Hwy.37
Mt. Vernon, IL 62864(618) 242-2273 (800) 388-6396
Fax: (618) 242-9161
1046 Lovers LaneBowling Green, KY
42103 (270) 781-1061(800) 489-1061
Fax: (270) 781-0907
1530 Heil Quaker Blvd.Nashville, TN 37086
(615) 641-1100(800) 635-9454
Fax: (615) 641-1108
HxGN LIVE – Hexagon’s International Conference, 3 – 6 June,2013, Las Vegas, Nevada, USA!Join Leica Geosystems at the HxGN LIVE Conference – formerlyknown as Hexagon 2013! It’s a different name, but the same greatconference – and an experience you don’t want to miss. REGISTERfor the Early Bird discount by January 14 for just $699 and save$600 off on-site rates. Group registration options and special dis-counts for previous conference alumni, educational institutions, lawenforcement agencies, and authorized dealers are also available.For more information contact: Angelique Ortega [email protected] +1 925/790-2318. See you in Las Vegas!
Michigan Construction & Design Tradeshow – February 6, 2013. The Construction Association of Michigan (CAM), Bloomfield Hills, is pleased toannounce that the Michigan Construction & Design Tradeshow will be returningto MotorCity Casino Hotel in Detroit. This one-day tradeshow will be held onFebruary 6, 2013, and will be attended by construction owners, contractors,suppliers, architects and engineers. Show hours are 10:00 AM to 5:00 PM. The Michigan Construction & Design Tradeshow will also play host to the CAM127th Annual Meeting, CAM Magazine Special Issue Awards, Green BuildingAwards, and Construction Project of the Year Award, which will be held insidethe Sound Board. CAMTEC, the training and education division of CAM, willoffer classes during the tradeshow, as well. Booth space is available for pur-chase. Contact Ron Riegel or Cathy Jones at CAM for tradeshow rates andinformation. Telephone: 248/972-1000 and Fax: 248/972-1001, 43636Woodward, Bloomfield Hills, MI 48302.
World of Concrete / Concrete and Masonry Construction Event – World ofConcrete - Exhibits: February 5 – 8, 2013 Seminars: February 4 – 8,2013 Las Vegas Convention Center, Las Vegas, Nevada USASince 1975, World of Concrete has been the industry’s only annual internation-al event dedicated to the commercial concrete and masonry constructionindustries. Featuring indoor and outdoor exhibits, leading suppliers showcas-ing innovative products and technologies, exciting demonstrations and compe-titions, a world-class education program, and the information you need to helpsustain and grow your business. Start the year off strong at World of Concrete!EMAIL: [email protected]
ARA The Rental Show is February 10-13 at a new Las Vegas location: TheSands Expo and Convention Center, right in the middle of the Las Vegas Strip.Click on www.therentalshow.com for a detailed schedule and more informa-tion.
AGC of America Annual Convention: Registration is now open for the 2013 AGCAnnual Convention and Constructor Expo, being held March 6 – 9 in PalmSprings. The early bird discount, a $200 savings, is available until January 16.Room availability at the convention headquarter hotel (JW Marriott DesertSprings) is limited, so reservations should be made as early as possible.Complete conference details are available at http://convention.agc.org or youmay contact Denise Woods, CMP, Director, Communications & Events, AGC ofMinnesota, directly at 651/796-2186; toll free at 800/552-7670 or website:www.agcmn.org.
2013 ANNUAL PAVING SEMINARTuesday, February 26, 2013Brought to you by Kirby-Smith Machinery, Inc., The PavingAuthorityWho Should Attend: Owners – Superintendents – EquipmentOperatorsArlington Convention Center1200 Ballpark WayArlington, Texas 760117:30 AM Registration 8 AM to 4 PM (lunch provided)Reservations Required by February 15, 2013To Register, go online at:www.kirby-smith.com and click on the Paving Seminar link. ***limited seating!Morning Breakout Sessions:. Milling. Paving. Soil Stabilization. CompactionAfternoon General Sessions:. New Technology in Hot Mix Designs Including RAP and RAS. Advanced Theory “Cold in Place Recycling”. Paver Tamper Screeds and Emulsion Advancements. Advanced Paver and Milling Grade ControlExhibit Hall Equipment Displays:. Complete Asphalt Paving Train. From Utility to Mainline Milling Machines. Latest Design in Soil Stabilizers. Introduction to Oscillating Compaction
2013 MAASTO CONFERENCE: The Wisconsin Department of Transportation willhost the Mid-America Association of State Transportation Officials (MAASTO)2013 Conference – “Sharing Strategies for Success.” The conference will be heldJULY 16-19 at the HILTON HOTEL in downtown Milwaukee. One of the majorevents at MAASTO 2013 will be a trade show, where industry representatives willhave the opportunity to showcase materials, technology, and professional serv-ices. The trade show will be held July 17 and 18 at the conference hotel. Moreinformation on the trade show registration, layout, schedule, and fees will beavailable in early 2013 at the conference website, which will be linked via theMAASTO meetings webpage – http://www.maasto.net/meetings.html. If you arelooking to speak to someone with regard to the above conference you may con-tact Denise Woods, CMP, Director, Communications & Events, AGC of Minnesota,directly at 651/796-2186; toll free at 800/552-7670 or website:www.agcmn.org.
AGC St. LouisConstruction Leadership Council MARDI GRAS FLOATThe AVENGERS of Construction Safety
SOULARD MARDI GRAS PARADEFebruary 9, 2013Please Dress in Hero Gear & Safety Construction Attire$80 per Ride: Price includes beer, beads and a great ride on the CLC Float!First come, First served: Limited availability!!! Registration Deadline: February 1, 2013Fax: (314) 781-2874FLOAT: $80 per RiderSponsorship Package: $500 (sponsorship and four riders)PROCEEDS go to the Jeff Staley Safety Foundation. Questions ??? Please con-tact: Jackie McMahon at (301) 659-9090 or Email: [email protected] – St. Louis***SAVE THE DATE!Beer, Brats & a Band … What more do you need?JUNE 13, 2013 (more details to follow).AGC – St. LouisSAFETY BANQUET – FEBRUARY 21, 2013(Details to Follow)
AGC of Minnesota Sales and Use Tax Seminar – Wednesday, February 13, 2013Do you know when you become a contractor-retailer? Or the defi-nitions of real property and tangible personal property? If you paytax on material from another state, do you owe the full Minnesotause tax on those materials? Get the answers to these and manyother tax questions on Wednesday, February 13. Please email:[email protected] or contact AGC’s website: www.agcmn.org ortelephone (651) 632-8929 or (800) 552-7670 for more infor-mation.
American Subcontractors Association – Midwest CouncilThe American Subcontractors Association (ASA) Midwest Council isa construction trade association made up of quality specialty con-tractors and suppliers serving the construction industry and thecommunity in the greater St. Louis metropolitan area and southernIllinois. The ASA Midwest Council’s purpose is to improve the con-struction process through active participation in education, legisla-tion and cooperation. For more information about the ASA MidwestCouncil, visit www.asamidwest.com or contact Executive DirectorSusan Winkelmann at 314/845-0855.
March 5 - 6, 2013 – 2013 Ohio Asphalt Expo, Columbus, OHRegistration is now open for the Ohio Asphalt Expo on March 5 thru6, 2013 at the Columbus/Polaris Hilton Hotel located at 8700 LyraDrive, Columbus, Ohio 43240.Office address and contact information: 6205 Emerald Parkway,Suite B, Dublin, OHPhone: 614/791-3600; Toll Free: 1/888-4HOTMIX; Email:[email protected].
March 6 - 8, 2013 – NTEA/THE WORK TRUCK SHOW,Indianapolis, INThe must-attend event for the work truck industry.. 500,000 square feet of vocational trucks and equipment. Newest products and technical support from more than 550exhibitors. More than 60 educational sessions on top-of-mind industryissuesFor more information on this event: Phone: 248/489-7090; Toll Free: 800/441-6832; Email:[email protected].
MARCH 19 – 21, 2013 – OAIMA (Ohio Aggregates &Industrial Minerals Association)Aggregates Academy & Expo, San Antonio, TexasAGG1 Aggregates Academy & Expo focuses exclusively on theaggregates industry as its leading education resource. Thisevent combines a plethora of education sessions led by expertsin virtually every segment of the aggregates industry with thelatest innovations in equipment, technology and software onthe AGG1 Expo show floor. REGISTER TODAY atwww.AGG1.ORG.You may contact the OAIMA at 1-800/OH.ROCKS. 614/428-7954. Fax: 614/428-7919.
March 19 – 21, 2013 – World of Asphalt , San Antonio, TXDon’t miss the Industry’s Main Event! Register to attend andsave 40%. Exhibit Show Floor is Almost Sold Out! Hurry,space is still available but going fast. Reserve space today!Co-located with AGG1 Aggregates Academy & ExpoMarch 19 – 21, 2013, San Antonio, TX, USA, Henry B.Gonzalez Convention CenterWorld of Asphalt Show & Conference is the leading expositionand education resource for the asphalt industry. The event fea-tures in-depth industry-focused educational programming andcomprehensive exhibits that showcase the latest technologiesand innovations in asphalt-related equipment, products andservices. World of Asphalt Show Management: Association ofEquipment Manufacturers6737 West Washington Street, Suite 2400, Milwaukee, WI53214-5647 USAToll Free Telephone: 800/867-6060 or contact [email protected].
March 20 & 21, 2013 – 34th West Virginia Construction &Design ExpositionThe region’s largest trade show for the Construction and DesignIndustries invite you to be a part of the 34th Annual Exposition– EXPO!The Contractors Association of West Virginia, American Instituteof Architects – WV Society of Professional Engineers & WVUtility Contractors Association, with the support of 24 co-spon-sors, want the opportunity to make EXPO work for you. Let ushear from you, if you have questions! [email protected]. PatParsons, Show Manager and Alice George, Office Manager
BusinessCalendar
Talbert’s 50 ton (45 t) 5051 traveling axle trailer has been designed for customers that need to comply with 43-ft. (13 m) kingpin laws and regulations.
SECT ION Pages 63-73
Work Trucks Meet Stage 8 Mechanical Locking FastenersStage 8, an active mechanical locking systems manufac-
turer, now has applications that keep work trucks on the road.Any mechanic will confirm that shock, pressure, vibration
and temperature change all combine to loosen fasteners,which inevitably come loose at the worst possible time.
Stage 8 provides application specific locking fastenersin an unlimited range of sizes, materials, thread pitchesand retainer configurations. The system is designed tostop threaded joint failure and downtime by preventingfastener loosening from starting, according to the manu-facturer.
Stage 8’s GrooveLok fastener locking system acts likea small wrench locked onto a bolt head, with the wrench(Stage 8 locking retainer) braced against a stationaryobject, such as a frame, casting or protrusion. This stopsany counter rotation of the bolt until the locking system
is removed. The system works the same way with nuts. Itincludes a grooved nut, an application specific retainer,which serves as the “wrench socket and handle”, and a
spring clip, all of which combine to work together. “When you see the clip and retainer locked in place, you
know the fasteners have maintained their full pre-load,” saidRobert Ahern, Stage 8 manager. “Until you remove theclip and retainer, the nut or bolt will not budge.
The Stage 8 system retrofits existing components, isfully reusable and works on items as small as eyeglassscrews, to bolts as large as 8-in. (20 cm) in diameterholding generator propellers onto a hydroelectric dam.To date, the system has no reported failures in more than17,000,000 applications, according to the manufacturer.
Stage 8 manufacturers many types of active, fail-safemechanical locking fasteners including locking headerbolts.
For more information, call 800/843-7836 or visitwww.stage8.com.
Stage 8 provides application specific locking fasteners in anunlimited range of sizes, materials, thread pitches and retain-er configurations.
Talbert Introduces 50-Ton 5051 Traveling Axle TrailerTalbert Manufacturing’s 50 ton (45 t)
5051 traveling axle trailer has been designedfor customers that need to comply with 43-ft. (13 m) kingpin laws and regulations.
Kingpin laws vary state to state but gener-ally apply to any trailer longer than 48 ft.(14.6 m) and less than 53 ft. (16 m). Theseregulations typically dictate the maximumdistance from the kingpin to the last axlemust measure 43 ft. or less. Adding to itsseries of traveling axle trailers, Talbertpushed the deck length to the limit, design-ing a 51-ft. (15.5 m) traveling axle trailer tomaximize the lower deck length and still
meet the 43-ft. kingpin law. Talbert’s TA Series trailers are known for
their six-degree load angle. This gradualslope is ideal for the towing and recoveryindustry, as well as rental equipment andsmall to midsize construction equipmentwith low ground clearances, such as rollersand pavers.
The 15,000-lb. (6,804 kg) planetarywinch, which comes standard on all trailersin Talbert’s 50-Ton TA Series, provides cus-tomers with an efficient winch. The plane-tary winch uses a direct-drive system andoffers up to twice the loading speed of the
worm gear winch. Operators can runTalbert’s planetary winch through a multi-function wireless remote, which allows oneperson to load a piece of equipment withoutleaving the trailer. This is ideal for loadinginoperable cars or machinery, according tothe manufacturer.
For reliable performance in heavy-dutyindustries, Talbert’s 5051TA also comprisesa T-1 & 80K steel beam constructed frame-work and 4-in. (10 cm) I-beam crossmem-bers on 9-in. (22.8 cm) centers to accommo-date more concentrated loads. Further, the I-beam construction prevents corrosion,
unlike boxed crossmenbers that tend to rustfrom the inside out.
Other standard features include 1½-in.(3.8 cm) apitong flooring as well as side andcenter tie-downs. Apitong is a tightly woven,highly dense wood that provides a longerwear life because it is less susceptible tochipping or cracking than other deck materi-als. Side and center tie-down slots areinstalled for greater loading ease and appli-cation flexibility.
For more information, call 800/348-5232or visit www.talbertmfg.com.
Trucks & Trailers
Page 64 • February 2, 2013 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide
AIS Construction EquipmentCorporation
3600 North Grand River AvenueLansing, MI 48906
517-321-8000Fax: 517-321-6275
600 44th Street S.W.Grand Rapids, MI 49548
616-538-2400Fax: 616-538-0449
65809 Gratiot AvenueLenox, MI 48050586-727-7502
Fax: 586-727-7311
4600 AIS DriveP.O. Box 253
Bridgeport, MI 48722989-777-0090
Fax: 989-777-1583
8300 M-72 EastWilliamsburg, MI 49690
231-267-5060Fax: 231-267-5257
56555 Pontiac TrailNew Hudson, MI 48165
248-437-8121800-457-8121
www.aisequip.com
2216 N. Greenbay Rd.Waukegan, IL 60087
847-336-1205
10351 W. Laraway Rd.Frankfort, IL 60423
815-464-6650
27939 W. Concrete Dr.Ingleside IL 60041815-363-4100
www.burrisequipment.com
949 3rd Ave.Windom, MN 56101
507-678-2752
Ditch Witch of North Dakota1100 W. Main Ave.
West Fargo, ND 58078701-282-3600877-282-3600
Fax: 701-282-3636
2921 Twin City Dr.Mandan, ND 58554
701-663-9551877-663-9551
Fax: 701-663-0692
Vermeer Sales & Service661 Hwy T14Pella, IA 50219866-483-7633
Fax: 641-628-4283
Vermeer Siouxland4858 D. Ave.
Marcus, IA 51035712-376-2310
Fax: 712-376-2312
Vermeer of Eastern Iowa101 Commerce Blvd.Tipton, IA 50219563-886-2444
Fax: 563-886-2223www.vermeeriowa.com
New Addition...
Landoll’s 342 Able to HandleEmpty 20-Ft. Containers
Landoll Corporation’s new trailer isdesigned to handle empty 20 ft. (6 m) con-tainers. The Model 342 is a light dutyGooseneck trailer that works well with shortsingle-axle tractors for increased maneuver-ability. The trailer comes standard with afifth wheel king pin, 7-way electrical con-nection and a single air brake axle. Thegooseneck is a short 8 ft. (2.4 m) and thelower deck is 23 ft. (7 m). The overall lengthbeing 31 ft. (9.4 m) long will legally handleup to 25 ft. (7.6 m) long containers.
The 342 comes standard with a chain-drive load system, loading bridle, tie-downchains, push bar and container side pin lock-downs. The standard storage box is designedto keep all items organized with chain hang-ing racks and trays.
The 342 operates hydraulically by meansof a wet kit on the truck or with an optional27 hp (20 kW) engine package mounted onthe gooseneck. The 342 features a 10.3degree load angle, 15,000 lb. air brake axlesand weighs 8,800 lbs. (3,991 kg). The gearbox chain drive system is a continuous ½chain that has 12,000 lbs. line pull.Customers may choose the 2 5/16 in. ballhitch and electric brake axle option whenpulling this trailer with a lighter duty truck.
The Model 342 features Landoll’s stan-dard equipment including powder coat painton entire trailer frame, centralized greasesystem, Grote wiring harness and LEDlights. Landoll trailers include a 5-year limit-ed warranty package.
For more information, call 800/428-5655.
The 342 operates hydraulically by means of a wet kit on the truck or with an option-al 27 hp (20 kW) engine package mounted on the gooseneck.
Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • February 2, 2013 • Page 65
Kentucky13090 Aiken Rd.
Louisville, KY 40223800-507-9705
4233 Russellville Rd.Bowling Green, KY 42101
866-528-9699
140 James Lewis Rd.London, KY 40744
877-231-7151
3279 Lexington Rd.Richmond, KY 40475
800-463-8722 www.holtequipment.net
6140 Highway 10 NWAnoka, MN 55303
763-323-1720 888-448-5266
Fax: 763-422-3949
3021 West 133rd Shakopee, MN 55379
952-445-6310 Fax: 952-496-0263
23580 Highway 55 Loretto, MN 55357
763-479-8200 Fax: 763-479-8201
1015 Highway 212 WestNorwood Young America, MN
952-467-2182Fax: 952-467-3259
901 Parker Ave. W.Dassel, MN 55325
877-570-2740www.farmriteequip.com
Scharber & Sons, Inc.13725 Main Street Rogers, MN 55374
763-428-4107 Fax: 763-428-2700 www.scharbers.com
1929 E. Madison Ave.Mankato, MN 56001
507-387-7376Fax: 507-387-7399
1400 W. Ogden Ave.Naperville, IL630-355-7150
310 W. 162 St. Rt. 6South Holland, IL
708-331-6362
3110 Prairie Rd.Rockford, IL
815-961-3160
1560 North Old Rand Rd. Wauconda, IL847-526-7700
600 Walnut CtRockdale, IL
815-730-9011
2170 South Yost Ave.Bloomington, IN 47403
812-333-9677Fax: 812-333-9731
5400 Industrial Rd.Fort Wayne, IN 46825
260-482-8576Fax: 260-483-4057
7355 East 30th St.Indianapolis, IN 46219
317-544-3411
Lafayette, IN 47905765-477-6933
Fax: 765-448-9038
South Bend, IN 46619574-232-1461
Fax: 574-233-3324
www.westsidetractorsales.com
Page 66 • February 2, 2013 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide
Philippi-Hagenbuch Truck Bodies Minimize MaintenancePhilippi-Hagenbuch (PHIL) takes hauling
hard rock and ore to a new level with itsHiVol Hard Rock/Ore Bodies.Designed with the hard rock and ore min-
ing industry in mind, PHIL engineered itsspecial Hard Rock / Ore bodies to easilyhandle highly abrasive material while mini-mizing carryback and maintenance require-ments. The reduced-weight design alsokeeps operators comfortable while allowingtrucks to haul at maximum capacities,according to the manufacturer. PHIL customizes every HiVol truck body
to the individual mine’s specifications. Thecustom design approach provides each oper-ation with the highest possible payload,longest lifespan and best possible long-termreturn on investment, according to the man-ufacturer. To ensure the body will fit a company’s
application and specifications precisely,PHIL’s engineers work closely with miningcustomers in identifying key factors that willimpact the design of the truck body. Thosefactors may include density and cohesivequalities of the material, height and widthrestrictions, loading equipment and climateconditions. In addition, PHIL applies its loadprofiling process in examining the naturalangle of repose, or how the material laysonce it is dumped into the body, to maximizeits payload capacity andreduce potential for materialto fall out of the body.Once it has identified all the
key factors, PHIL begins theengineering process. As withall of its products, the compa-ny’s engineers focus on a pro-prietary process for all HiVolbodies that removes unneces-sary steel and, as a result,unnecessary weight. By doingso, they are able to add fea-tures, such as greater widthand the most substantial floorbolster system available; allbased on PHIL standards thathave been refined over fivedecades. The combineddesign aspects contribute togreater capacity to equal fullyutilized gross vehicle weights(GVW). The design continues with-
in the load containing portionof HiVol Hard Rock / Ore bodies withhydrophobic steel liners in the front cornersand the front third of the body slope, alongwith a high-abrasion liner in the rear third ofthe floor. The liners provide ultimate dura-bility against abrasive materials while ensur-ing as much hauled material as possibleleaves the body during dumping. Often, theore and soil mixed payload becomes muddy
and sticky, and it tends to form abridge across the front of the truckbody. Traditionally, that has leftvaluable and costly materialbehind. As the name suggests,hydrophobic materials repel mois-ture. PHIL strategically places thisunique steel in key parts of thetruck body — areas where carry-back begins — reducing the like-lihood that materials will be ableto build up, according to the man-ufacturer.A substantial taper of the body
from the front to the back alsodecreases wear and carrybackpotential on the body sides.Because the body is narrower atthe front than at the back, materialreleases immediately as it beginsto dump and slides straight out ofthe body without abrading thesides. By constructing the body ina manner that reduces wear to thesides, Philippi-Hagenbuch is able to cutweight from the sides of the body and usethe extra weight capacity to reinforce otherareas of the truck body that generally receivethe most wear. Reinforced body side top rails are half
sections of rounded pipe that tie the inside
steel plate to the outside plate at the top andcover the gap between them. They provideadded reinforcement to the sides of the truckbody and eliminate the potential for materialto build up within the sidewalls. With out-side steel plates that taper inward near thetop, the top rails also provide a compressiveeffect. In other words, they provide addedstrength to the body walls to protect their
integrity in the unlikely event that they arestruck by a loading tool.In addition, steel bolsters that run from
side to side under the body floor double thesize of the “sweet spot,” the area that canhandle the greatest material impact, withinthe center floor section. The bolster design
runs through the frame rails,which run from front to back andtie the floor together more sub-stantially than any other floor inthe industry. The floors in allPHIL custom bodies create asuper structure that won’t buckleunder the immense weight of themined materials. At the sametime it keeps payload at a maxi-mum capacity. PHIL also incorporates spe-
cially sourced 450 Brinell steelthroughout every HiVol body.This steel contains less carbonthan most 450 Brinell steel beingused in truck bodies today. Thelower the carbon level, the lesslikely it is that the steel willbecome brittle and crack in coldweather conditions. As a result,the steel in PHIL bodies is ableto handle intense environmentsand require little maintenance,even after hundreds of thousands
of tons hauled.In addition, HiVols are wider than other
bodies and and have a lower center of grav-ity, with a third of the weight over the frontaxle and two-thirds over the back. The com-bination delivers several benefits. First, it allows for even and well-balanced
weight distribution across the entire bed ofthe truck body. Improved weight distribution
benefits truck body and tirelife by eliminating the poten-tial for greater weight wear-ing on specific areas. Withthe weight more equally dis-tributed across all of the tiresthemselves, the potential foruneven wear also is greatlyreduced. Finally the nearperfect weight distributionprovides a smoother, saferride for the driver.Customizing each HiVol
body to the mine’s specifica-tions increases loading safe-ty and greatly reduces thepotential for loading dam-age. PHIL designs eachbody to ensure the width iscorrectly paired with theloading tool. This providesfor the lowest possible load-ing height and allows theshovel to get closer to the
floor of the body, nearly eliminating thechances that loading equipment will damagethe sides. It also translates to less vibration tothe truck driver and less impact within thetruck body when material is loaded.In addition, the HiVol is constructed to
ensure that the tail of the truck body hasample clearance at full dump. Taking bermheight requirements into consideration,PHIL engineers its bodies so they do not fallbelow the center of the wheels, or the heightof the berm, at full dump. This helps elimi-nate tail damage from dumping into a pile.PHIL’s body lifting system also con-
tributes to easy maintenance and installationof its truck bodies. The system builds fourremovable free-floating lifting eyes made of450 Brinell steel for temporary integrationinto the floor of the truck body. This com-pares to traditional bodies, which place lift-ing eyes on the body sides and pull in onthem when the body is being lifted. Duringinstallation or removal of a body, the 10-in.diameter lifting hole covers are removed andoperators can attach rigging to the eyes thatare inserted from beneath the body. The lift-ing eyes integrate into the floor supportstructure, so there is no stress placed on thebody’s sides, increasing their life. Lower lift-ing points also mean bodies don’t need to belifted as high during removal, which resultsin the ability to remove or install a bodywithin most mine maintenance shops. Thisprovides greater efficiency and enhancessafety for personnel during installation andremoval. Worker safety is further increasedas lifting straps can be hooked from the truckfloor rather than from the high sides of thebody.For more information, call 800/447-6464
or visit www.philsystems.com.
Philippi-Hagenbuch’s body lifting system builds four removablefree-floating lifting eyes made of 450 Brinell steel for temporaryintegration into the floor of the truck body.
Philippi-Hagenbuch customizes every HiVol truck body to theindividual mine’s specifications.
Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • February 2, 2013 • Page 67
Get Your Lowest Price Online: MeritChev.com
2695 BROOKVIEW DRIVE • MAPLEWOOD ST. PAUL
We’ve been selling cars and saving you money since 1949!
All sales/leases are in stock vehicles with approved credit. All rebates assigned to dealer. Due to early print deadlines, factory offers may change without notice. Not responsible for typographical errors. Ad# 41650-MECH
Follow us on...
I-94 & CENTURY AVENUE (EXIT 247 FROM I-94)
1-888-650-4451CALLTOLLFREE:
WE QUOTE PRICES OVER THE PHONE!
WE QUOTE PRICES OVER THE PHONE!
Stop in or Call us for a Quote Today!
Sales: Mon-Thu 8:30am-9:00pm • Fri & Sat 8:30am-6:00pm Service: Fri 7:00am-5:30pm • Sat 8:00am-12:00pm Night Owl Service: Mon-Thu 7:00am-11pm
WHAT IF?Dealers were equipped to truly partner with Businesses for all of their vehicles needs?
Merit Chevrolet Wants To Be Your Business PartnerAt Merit Chevrolet we’re committed to being the #1 Choice for Commercial Customers. We want to help you
succeed in your business by providing you with great products, innovative solutions and he tools that will make for an exceptional customer experience. After all, Your Success is Our Success!
For Great Products, Innovative Solutions and Exceptional Customer Service call Merit Chevrolet.YOUR LOCAL BUSINESS ELITE DEALER!
• More Than 40 Business and Fleet Vehicles• On-Site D.O.T. Inspections• Extensive of Fuel Solutions: Diesel, FlexFuel, CNG, LPG Bi-Fuel, eAssist, Electric• Work-Ready Loaners
• Dedicated Business Elite Commercial Sales Managers and Account Specialists• Business Elite Website• Business Financing and Leasing Options• Work-Ready Vehicles In Stock
• Complimentary Business Maintenance Plans
• Priority Hours
• Priority Service
• Business Equipment Incentives
• Business Maintenance Pricing
At Merit Chevrolet we’re committed to being the #1 Choice for Commercial Customers. We want to help yousucceed in your business by providing you with great products, innovative solutions and the tools that
will make for an exceptional customer experience. After all, Your Success is Our Success!
Page 68 • February 2, 2013 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide
LED WORK LITES
Supplying quality products to the Trucking, Trailer, Towing, Safety and Agricultural
Industries since 1993.
Caterpillar Develops MT5300DAC 320-Ton Capacity Truck
Caterpillar’s MT5300D AC 320-ton-capacity (290-t-capacity) mining truck inte-grates a Cat C175-16 engine and Cat 360TAC electric drive system with the Unit RigMT Series trucks. The MT5300D AC takesits place in Caterpillar’s large mining truckproduct line between the 250-ton-capacity(227-t-capacity) 793F and the 360-ton-capacity (327-t-capacity) 795F AC.
The new truck builds on Unit Rig’s 50years of electric-drive mining truck experi-ence and the thousands of units currentlyworking in mines around the world. Thestrength of the Cat engine and drive systemcombine with Cat dealer support and UnitRig designs to deliver high performance andefficiency to mining customers. TheMT5300D will be commercially available inthe near future.
The MT5300D AC leverages Unit Rig’smillions of hours of field experience with theMT Series truck chassis, hydraulics, electri-cal system and suspension and integratesthose systems with a Cat engine, AC driveand vehicle information management sys-tem. The Cat AC electric drive train is effi-cient and reliable, and has logged hundredsof thousands of hours in the lab and field,
most notably in the 795F AC, according tothe manufacturer.
The Cat electric drive truck program alsoleverages Electro-Motive Diesel’s (EMD)locomotive experience in design and manu-facturing. EMD is a Caterpillar company,and the system is Caterpillar designed, inte-grated and supported.
The MT5300D AC is designed to offerstrong performance, safety, ease of operationand maintenance, and reliability. The CatC175-16 is proven in Cat large miningtrucks, and the Cat AC drive system featuresdynamic retarding capacity combined withfour-corner wet disc brakes. The system cre-ates operator confidence that leads to pro-ductive and safe operation, according to themanufacturer.
The ROPS cab, wide access stairways,traction control and quiet radial retarder gridwith wide right-side visibility enhance safe-ty and further benefit the operator. Simplehydraulic systems, modular components,hydraulic gauge cabinet, grouped servicelocations, engine bay service walkways andmore ground accessible maintenance pointstranslate into less downtime and enhancesafety for maintenance technicians.
Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • February 2, 2013 • Page 69
JEFF BELZER’SLAKEVILLE, MN
CHEVROLET
A POWERFULWORKFORCE
CALL FOR
SPECIAL PRICING
FOR MNLA-AGC-NAHB
MEMBERS ON
SELECT VEHICLES
Vehicles ready for work at a moment’s notice. Professionals trained to keep business owners happy. Service facilities equipped for commercial applications. As a Chevy Business Central dealer, we’re all business.
COMMERCIAL HEADQUARTERSJeff Belzer Chevrolet, 50 & Cedar, BX 965 Lakeville, MN
Please Call the Commercial Dept, 1-877-671-8226 OR 952-469-4444All Rebates & Incentives to Dealer, Must Qualify for Same, Prices Subject to Change
©2009 General Motors
George Miller [email protected]
Ron Kelly [email protected]
2012 2500 expres vans, from $24,999. 2013 k3500 4x2 chassis 84 c/a, gas,posi, sno prep, from $26,999.
hard to find 2012 k2500 crew cab 4x4long box, gas, lt, from $37,499.
2013 1500 ext cab 4x2 "LT" 4.8 v8, posi,trailer pkg, $24,599.
2012 ext cab 4x2, 9,500 gvw, 8 ft asoriafiberglass service body, (no rust). promounit, call for pricing
2013 k3500 crew long box, wt, 6.0 gas,has to go $33,299, plus ttl
2013 k2500, ready for plow, call for pricing.
2013 c1500 wt 4x2 ac, cruise, from$18,299.
SOLDSOLD2 Crew Gas 4x4’s
ChassisInbound
Call for Info
Page 70 • February 2, 2013 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide
SmartphoneUsers VisitUs Online
(877) 343-5319www.ZipsTransportEquipment.com
Smart Body with GTD-24-HT Hydraulic Tail Trailer
For the Long Haul
The new Traveling Axle series from TrailMax exceeds performance
expectations. The LOWEST LOAD ANGLE and LOWEST DECK HEIGHT
give it a distinct advantage over the competition. All backed by our 5 year
non-prorated structural warranty. Call today or visit our website for more
about the new Traveling Axle series from TrailMax.
Traveling Axle TrailerTraveling Axle Trailer
• Fabricated 4-beam high
tensile frame
• 70,000# Distributed
Capacity
• 50,000# Concentrated
Capacity
• 6º load angle
• 16º dump angle
Financing Packages Available!!
Liebherr Returns to 240-Ton Class With T 264 Mining Truck In order to expanded its product range and
synergize with its line of hydraulic miningexcavators, Liebherr has returned to the 240-ton (218 t) class with the premiere of the T264.
Backed by 30 years of design and opera-tional experience, this fuel-efficient miningtruck is built for safety and reliability, and issized to match the Liebherr R 996 B and R9800 hydraulic excavators, as well as elec-tric shovels and wheel loaders for optimalperformance, according to the manufacturer.
The T 264 combines a Litronic Plus ACdrive system and a high power engine (up to2,700 hp/2,013 kW) to yield higher speedson grade.
Developed and built by Liebherr, theLitronic Plus drive system determines theoptimal way to extract power from the dieselengine. Efficient loading of the engine is crit-ical to minimize fuel consumption and max-imize performance.
The advanced traction control systemwith four-wheel speed sensing capabilityautomatically adjusts torque to the rearwheels in order to maximize traction whencornering, accelerating from a standstill, ortraveling down wet or icy roads. Developedby Liebherr exclusively for mining trucks,this system enables operators to consistently
maintain steering control and truck stability,according to the manufacturer.
The T 264 features high-powered, fric-
tionless dynamic braking. The AC drive sys-tem delivers up to 4,425 hp (3,300 kW) ofelectric dynamic braking, reducing engine
loading and fuel consumption.The T 264 is designed to operate for
approximately 24 hours without refueling,dependent upon application. The extendedoperation is supported by its low fuel con-sumption and 1,300 gal. (4,920 L) fuelcapacity.
Efficient Service Access andIntegrated Monitoring
Liebherr mining trucks are equipped withladders designed for easy engine access. Thelow working heights of maintenance areasprovide safe and efficient service access.Access to the engine and alternator fromboth sides of the chassis, and there is dualaccess into the axle box for maintenance andinspection. Hydraulic filters and the batteryisolation box, as well as filling points forfuel, hydraulic oil, grease and coolant, are allat ground level.
The integrated electronic system moni-tors, records, and outputs vital truck healthand performance data. Data is stored andavailable for download to perform detailedanalysis. This system supports predictivemaintenance strategies to minimizeunscheduled downtime.
For more information, visitwww.Liebherr.com.
Liebherr has returned to the 240-ton (218 t) class with the premiere of the T 264.
Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • February 2, 2013 • Page 71
Still Faster, Still Stronger, Still More Reliable
888-743-8677 • [email protected]
www.sidumpr.com
Sidump’r Is Looking For DealersInterested in becoming a Sidump’r Dealer? Please email our sales dept. at [email protected] we will be glad to assist you in becoming a Sidump’r dealer.
1.888.743.8677 | [email protected]
The Sidump’r Difference Unique One Cylinder System
Superior Tub DesignSuperior Tub Design
Air Ride Suspension
Faster dump cycle times��
“No center divider” allows dumping a variety of cargo materials and dumping a distributed load, “wind rowing on the go” or stationary dumping from on-off road,curbside or over bridge rails
�
Air-ride supensions offer increased stability and safety��
Exclusive 2 year warranty on cylinder ��
One-piece tub made out of tough Hardox AR450 “Abrasive Resistant” steel from Sweden
��
�� Standard on all models
ad,
istant”
emem
ping
linder
Call and Ask About Our New THREE YEAR Tub Warranty
Page 72 • February 2, 2013 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide
Parts & Equipment Sales
Truck & Trailer Sales
+
Since 1939
5 Locations to serve you in Spencer, Des Moines & Council Bluffs, IA & Sioux Falls, SD
www.vanderhaags.com’
866-634-5030Vander Haags,Inc.
Service & Equipment Installation
=
We carry all the names you trust!
JEFF BELZER’SDodge Ram Tough
Vehicles ready for work at a moment’s notice. Professionals trained to keep business owners happy. Service facilities equipped for commercial applications.
COMMERCIAL HEADQUARTERSJeff Belzer Ram Dodge, 21111 Cedar Ave., Lakeville, MN
Please Call the Commercial Dept, 1-877-671-8226 OR 952-469-4444All Rebates & Incentives to Dealer, Must Qualify for Same, Prices Subject to Change
George Miller [email protected]
Ron Kelly [email protected]
John Zadurski [email protected]
2011 3500 4x4, Sno Prep,60” c/a or 84” c/a, Your Choice $35,800
2012 Ram 5500 4x4, 84” c/a, Sno-prep, Power Group, From $40,399
2012 Ram 5500 4x2 Crew,84 c/a, well equipped, From $40,499
Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • February 2, 2013 • Page 73
Vermeer Sales & Service
1675 126th St. WestBurnsville, MN 55337
952-890-6144Fax: 952-882-2980
www.vermeerofminnesota.com
Midwest Trailers Plus, Inc.548 29th St. West
Des Moines, IA 50265515-223-8463
Toll Free: 888-560-2787Fax: 515-223-6446
www.midwesttrailersplus.com
Farm-Rite Equipment Inc.
901 Parker Ave WestPO Box 26
Dassel, MN 55325320-275-2737
Toll Free: 888-679-4857www.farmriteequip.com
K.C. Bobcat2209 W. 40 Highway
Blue Springs, MO 64015800-697-4228816-229-7631
Olathe, KS800-598-4228Platte City, MO800-984-3001
McCann Industries, Inc.
Addison543 South Rohlwing Road
Addison, IL 60101630-627-0000 • Fax: 630-627-8711
Bolingbrook250 East Frontage RoadBolingbrook, IL 60440
630-739-7770 • Fax: 630-739-7699Chicago
2350 South Laflin StreetChicago, IL 60608
312-942-9200 • Fax: 312-421-3502Crestwood
4701 West 137th StreetCrestwood, IL 60445
708-597-3110 • Fax: 708-597-9945
McHenry4102 W. Crystal Lake Road
McHenry, IL 60050815-385-0420 • Fax: 815-385-2975
Schererville1133 Indianapolis Boulevard
Schererville, IN 46375219-865-6545 • Fax: 219-865-0269
Wauconda1360 North Rand Road
Wauconda, IL 60084847-526-9444 • Fax: 847-526-9448
www.McCannOnline.com
Titan MachineryShakopee Division
6340 Hwy 101Shakopee, MN 55379
952-445-5400 • 800-795-9274Fax: 952-445-0365Duluth Division4311 Haines Rd.
Hermantown, MN 55811218-727-3038 • 800-795-0117
Fax: 218-727-2827Rogers Division
14375 James Rd.Rogers, MN 55374
763-428-5099 • Fax: 763-428-5051Industrial Division
N1626 Wuensch Rd.LaCrosse, WI 54601
608-788-1025 • 800-780-1025Fax: 608-788-1027
Page 74 • February 2, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
AERIAL LIFTS
Manlifts
GRADALL / LULLSales - Service - Training
Modern EquipmentSales & Rental800-445-4381
ASPHALT EQUIPMENT
Asphalt Pavers
2003 LeeBoy 8500, 8-15 ftpaver, propane heat, good con-dition, 3245 hours........$38,225.
Casey Equipment Co.847-437-8686
Cat 10-20B, extend-a-matscreed, diesel heat, good condi-tion..............................$20,000.
336-685-4998
Asphalt - Misc.
2005 Cimline 110D, 110 gallon,25' hose and wand, diesel firedkettle, 3415 hours........$14,995.
Star Equipment800-369-2215
Milling Machines
2006 Dynapac PL2000, 80''planer, front loading conveyor,good condition, 3423 hours..................................$183,750.
Casey Equipment Co.847-437-8686
ATTACHMENTS
Attachments - Misc.
MEDIUM DUTY ASPHALTCUTTER
Designed to Fit Wheel LoaderBuckets
Multiple Sizes and AttachmentStyles Available
Starting at $1383
BORING EQUIPMENT
Boring
2008 Yanmar CBL 40C,includes PTO, 3 pt. hitch, back-hoe, loader bucket attachedw/skid plate, great condition,216 hours....................$32,500.
Vermeer Iowa641-628-2000
COMPACTION EQUIP.
Pneumatic Rollers
1997 Champion 660, OROPS,very good shape, 1301hours...........................$27,500.
616-813-7955
2005 Bomag BW138AD, dou-ble drum smooth roller....................................$20,500.Bomag BW12R, ROPS...................................$12,000.1992 Bomag BW12R,ROPS.........................$13,900.
316-945-1015
CONCRETE EQUIPMENT
Concrete Equip. - Misc.
Somero Copperhead XO2.0,10' screed head, lift harness,narrow and flotation, tires, sen-sors, 935 hours...........$19,995.
Star Equipment800-369-2215
CRANES
Conventional Truck Cranes
2007 AutoCrane 6906EH, 6000lb crane for service body, goodcondition .......................$9900.
952-656-7107
Crane Inspections
ALL TYPES OF CRANESINSPECTED AND CERTIFIED
Accredited by the US Dept.
of Labor Under 29CFR Part
1919 and Accredited by
CALOSHA
Call 215-639-2579Atlantic Crane
Inspection Services
Visit us at
www.atlanticcrane.com
CRAWLER TRACTORS
Crawler Tractors
199 John Deere 450H, 16''pads, heat, Rops, semi-Ublade, 5018 hours...................................$35,500.205 John Deere 850J, A/C,heat, hyd tilt, ROPS, cab, 24''pads, 5121 hours ......$159,500.
316-945-1015
1985 Cat D5B, cab with A/C,sweeps, ripper, 20'' shoes,average condition, 14,100hours...........................$36,500.
913-371-3822
2010 John Deere 450J LGP,OROPS, very low originalhours, excellent, 541hours..........................$73,500.2006 John Deere 450J LGP,OROPS, very clean, 2914hours..........................$42,500.
616-813-7955
EXCAVATORS
Hydraulic Excavators
2006 Hyundai R450LC-7, A/C,medium stick, 101K lbs, greatcondition, 3000 hrs...$179,000.
219-616-6067
2005 John Deere 35D,OROPS, rubber track, 24''bucket, very good, 3210hours...........................$31,900.2012 John Deere 135D, A/C,blade, 24'' shoes, manualthumb, bkt, warranty, excellent,337 hours.................$129,500.2008 John Deere 350DLC, hyd.thumb, 13' stick, aux hyd, verygood, 3388 hours.....$185,500.
616-813-7955
2006 Hitachi ZX50U, cab, A/C,18'' bucket, very good, 3167hrs...............................$31,900.
616-813-7955
1991 Kobelco SK200LC III,mechanical thumb, 30'' bucket,fair condition, 8200hours...........................$34,500.
913-787-2371
NH Construction Equipment
New & UsedParts & Service
Modern EquipmentSales & Rental800-445-4381
2007 JCB JS260, 60,000 lbwith bucket, hyd quick couplerand bucket, good condition,2535 hours ...............$103,425.
Casey Equipment Co.847-437-8686
2008 John Deere 350D LC, cabwith A/C, QC, aux. hyd, hydthumb, great condition, 3850hours ..................................Call
913-915-1607
Cat 3018, 2211 Tulsa, working
condition, 2369 hours....$8,500.
918-438-1560
Mini Excavators
NH Construction Equipment
New & Used
Parts & Service
Modern Equipment
Sales & Rental
800-445-4381
FORESTRY EQUIPMENT
Chippers
Woodchuck Towable diesel, in
very good condition, new
knives, paint and decals.$4500.
All Offers Considered
Call Don
870-793-2147
If no answer call 501-388-9034
FORKLIFTS
Industrial Forklifts
GRADALL / LULL
Sales - Service - Training
Modern Equipment
Sales & Rental
800-445-4381
Rough Terrain Forklifts
Gehl RS519, open ROPS,
5000#, 19' max reach, aux hyd,
48'' carriage, 3500
hours..........................$31,995.
(2) Gehl RS642, 6000#, 42'
max reach, 115HP, open
ROPS, 48'' carriage, 2600/2625
hours....................Ea. $38,995.
Star Equipment
800-369-2215
LANDSCAPE EQUIP.
Landscape Loaders
2006 John Deere 210LE,
OROPS, new tires, Box blade,
very good, 1564
hours..........................$29,000.
616-813-7955
LOADERS
Backhoe Loaders
2008 Yanmar CBL40A, 3 pt
hitch, PTO, backhoe loader
bucket with skid plate, very
good condition, 216 hours
...................................$31,000.
641-628-2000
2007 John Deere 410G, cab,
4x4, ext dig, Pilot controls, ride
control, very good, 2495 hours
....................................$61,500.
616-813-7955
Crawler Loaders
Cat 963C, s/n BBD00385, 9380
hours, 1200 hours on new U/C,
runs good, no leaks....$62,500.
641-228-6944
Skid Steer Loaders
Mustang 2054, 50HP, cab,
heat, aux hyd, T-bat steer,
smooth bucket, 3175
hours.........................$13,995.
Mustang 2054, 50HP, cab,
heat, foot controls, smooth
bucket, 1300 hours......$15,995.
Mustang 2054, 50HP, cab,
heat, smooth bucket, 1200
hours...........................$15,995.
Star Equipment
800-369-2215
2010 Bobcat S150, Bobcat SSL
with tooth bucket, enclosed
cab, heat, 6 mo. driveline war-
ranty, great condition, 120
hours...........................$22,500.
Ask for Glenn Engels
316-641-4896
Wheel Loaders
NH Construction Equipment
New & Used
Parts & Service
Modern Equipment
Sales & Rental
800-445-4381
Track Loaders
Takeuchi TL130C, 70 hp, cab,
heat, A/C, bucket, 3600
hours...........................$17,995.
Star Equipment
800-369-2215
MISCELLANEOUS
Miscellaneous
2008 ThawzAll 20106AD,ground thawing machine withDA7000SSA gen. (Multi Quip),good condition............$35,000.
515-253-9048
SCRAPERS
Motor Scrapers
1984 Cat 615, EROPS, A/C,rebuilt engine, painted, fair con-dition, 12,000 hours....$49,500.
219-696-8911
TRAINING
Operator Training
Are your operators compliantwith Federal Standards,
OSHA, ANSI, ISO?
MODERN GROUP offers training for:
Front-end Loaders & Backhoes
Aerial work platforms (AWP)(Boom & Scissor Lifts)
Rough Terrain Forklifts (Gradall, Lull, JCB)
Skid Steer Loaders
For information, pricing orreservations:
Call 1-800-223-3827www.moderngroup.com
All prices include Trainer,travel and material
NO HIDDEN COSTS
TRENCHING EQUIPMENT
Trenchers
1999 Ditch Witch 1820, 36''boom, 35k 4P dirt chain, crum-ber attach., good condi-tion.................................$6995.1992 Ditch Witch 3500, 12''bucket, 36'' roller boom, goodcondition, 3002 hours..$12,500.
501-316-3200
TRUCKS
Service Trucks
2001 IMT Lube Truck, 14' encllube body mounted on SterlingActerra chassis, 144k miles....................................$45,995.
Star Equipment800-369-2215
Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢.
For just an additional $20 your ad can be posted on our online searchable database for 30 days
Ad runs for 2 (two) insertions - no changes in second insertion.
PLEASE ENCLOSE PAYMENT WITH ORDER and mail to - 470 Maryland Drive• Fort Washington, PA 19034
215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200CLASSIFIEDS
Construction Equipment Guide • Parts Section • www.constructionequipmentguide.com • February 2, 2013 • Page 75
Quality Heavy Equipment Parts,Responsive Service and Competitive Pricing.
www.h-eParts.com
Atlanta/Eastern800-438-2699
Des Moines/Western800-426-4136
Florida/Export305-477-8000
SERVING YOU WITH QUALITY SINCE 1932
11:03 AM Page 1
Contractors Optimistic: Demand for PrivateSector Construction Work May Risefewer people in 2013 and only 13 percent planning to hiremore than 25 new workers this year.Among the 30 states with large enough survey sample
sizes, 56 percent of firms in Maryland plan to hire new staffthis year, more than in any other state. Only 14 percent offirms in South Carolina plan to add staff this year, the leastamount in any state. Meanwhile, 37 percent of firms inMichigan plan layoffs for this year, the highest percentage ofany state. No firms working in Maryland reported plans tomake layoffs this year. Contractors appear increasingly optimistic that demand
for certain private sector projects will expand this year,Sandherr noted. Firms are most optimistic about the outlookfor hospital and higher education construction, he said, not-ing that 36 percent of firms predict the amount of moneyspent on those projects will grow in 2013 while 39 percentof firms expect the market will remain stable compared tolast year. Contractors also were optimistic about the marketsfor power construction, but had lower expectations for man-ufacturing; private office and retail, warehouse and lodgingconstruction.Meanwhile, contractors expect demand for many types of
public construction will decline in 2013. For example, 40percent of contractors report they expect demand for publicbuildings to shrink in 2013 while only 18 percent expect thatmarket to grow. Another 37 percent of contractors report
they expect demand for K-12 school construction to shrinkwhile only 20 percent expect it to increase. And 35 percentof contractors expect the market for manufacturing facilitiesto shrink this year, while only 23 percent predict it willexpand.A significant — but smaller than last year — number of
contractors report that customers’ projects have beendelayed or cancelled because of tight credit conditions. Fortypercent of responding firms report that tighter lending con-ditions have forced their customers to delay or cancel con-struction projects. Only 3 percent of firms reported havingan easier time getting credit while 41 percent report nochange in credit conditions.“Unfortunately, there are almost as many causes for con-
cern as there are signs of optimism,” said Ken Simonson, theassociation’s chief economist. “Demand for public buildingsis set to decline, manufacturing work appears to be slacken-ing, materials prices and health care costs continue to riseand many firms are reluctant to make major investments innew equipment.”Simonson noted that overall demand for new construction
equipment is likely to remain modest in 2013. Sixty-fourpercent of firms plan to purchase new equipment this year,down from 70 percent last year, while 77 percent of firmsplan to lease this year compared to 78 percent in 2012.Contractors are increasingly relying on leasing equipment to
OUTLOOK from page 1
see OUTLOOK page 84
WHAT A CHILD LEARNS ABOUT VIOLENCE A CHILD LEARNS FOR LIFE.Everything you say and everything you do serves as a lesson to your child about violence. A lesson that will never be forgotten.
Teach carefully. We can show you how. Call 877-ACT-WISE for a free brochure or visit www.actagainstviolence.org.
Page 76 • February 2, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
The Easy Way To Advertise Your EquipmentValued At Less Than $1 Million Run In TwoConsecutive Issues For $95, Color Ad $145
2007 Kobelco SK480LC, 6798 Hrs.........$115,000Call David at 219-696-5680
2009 Grove RT 880E, 80 Ton Rough Terrain, Tier3 Cummins, 41’-128’ Main Boom, 33’-56’ Jib,Auxiliary Winch, Block, Ball, 18000 Lb HydraulicRemovable Counterweight, A/C and Tilt Cab, 4500Hrs, FOB Cleveland, OH ..................................Call
Call Andy at 216-316-1511 3-4 EB
2012 Manitowoc555 Series 2, 150Ton Crawler Crane,Cummins, 200’ MainBoom, A/C Cab, SelfErect, Luffer & 3rdDrum Prepped,Block & Ball, FOBAtlanta, GA ........Call
Call Andy at 216-316-1511
3-4 EB
Skidsteers Starting at $14,500Call Dan 612-306-4496 2-3 PK
Komatsu PC 40-7 Compact Excavator, 5970Hrs, Cab, 4 Ton Unit, Serviced and Ready forWork.............................................................$19,500
Call Dan 612-306-4496 2-3 PK
2009 Ditch Witch JT100, 785 Hrs, ExtendedWarranty Through 7/26/14. 1740’ Rod, 10 RodBoxes, Reamers Included, Complete Accessory Kit
Call Tim 630-665-5600 3-4 JM
2003 Ditch Witch 1820 Walk-Behind Trencher,Good Condition, 481 Hrs, 36”x4” Combo Chain
Call Tim 630-665-5600 3-4 JM
1991 John Deere 300D, S/N 775834, OpenROPS..........................................................$19,000Call 502/456-4050 Ask for Melissa or Albert 3-4 EB
2005 Takeuchi TB135, s/n 13516545, 2450 Hrs,Cab w/Heat and AC, Dozer Blade, 12” and 24”Bkts.............................................................$31,000
Call Steve at 630-878-8765 2-3 JM
3-4 JM
2005 Case 435, s/n N5M400417, 2600 Hrs, ROPS,Two Speed, Manual Coupler, Master Disconnect,Grid Heater .................................................$17,500
Call Mario 630-878-8396 2-3 JM
1994 Case 721B, s/n JEE0039571, 6250 Hrs, Cabw/Heat, Pro 1000 ACS Coupler w/2.75 Yd Bkt.............................................................................$38,000
Call Mike 219-712-7700 2-3 JM
2002 Bobcat 430XHS Mini Excavator, 2795 Hrs.......................................................................$18,200
Call Gary Mertz 314-895-9500 2-3 JM
Here's how the BARGAIN ADS Work:
• Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number.
• Either email your copy & photo to: [email protected], or mail to:Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.
• Cost is $95 per ad, $50 additional for color.
• Your ad will run for two consecutive issues in 1 region.
Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyersin the Midwest States.
For more information, call Construction Equipment Guide today at
800/523-2200
2006 Doosan DL400, s/n 5099, Cab, Heat, AC &Bucket, 2859 Hrs ......................................$115,000
Call David 219-696-5680 3-4 JM
2011 Bobcat 5600 ToolCat, 399 Hrs, Enclosed Cab, Heat, A/C,HighFlow, PowerBobTach, Heavy Duty Battery, Track MudTires, Deluxe Road Pkg., E/N1036722 .........................$43,500
800-950-3321 • www.whitestarmachinery.comWhite Star Machinery, Garden City, KS 2-3 JM
2007 Bobcat S330 SSL, 772 Hrs, Joystick, High Flow, E/N1053177 .........................................................................$33,100
800-950-3321 • www.whitestarmachinery.comWhite Star Machinery, Garden City, KS 2-3 JM
2007 Bobcat S185 SSL, 717 Hrs, Enclosed Cab, Heat, SuspSeat, PowerBobTachTM, E/N 1054344......................$26,950
800-950-3321 • www.whitestarmachinery.comWhite Star Machinery, Topeka, KS 2-3 JM
2010 Bobcat S150 Skid Steer Loader, 120 Hrs, EnclosedCab, Heat 6 Mo. Driveline Warranty, New Tooth Bkt
Glenn Engels 316-641-4896 • Wichita, KS 2-3 JM
1997 SK-120 Kobelco, 5350 Hrs, 2 Buckets, 3rdValve...........................................................$29,500
Courts Machinery • 507/678-2752 3 PK
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 2, 2013 • Page 77
The Easy Way To Advertise Your EquipmentValued At Less Than $1 Million Run In TwoConsecutive Issues For $95
2012 Takeuchi TL240, 545 hrs, 76” bkt, 86 hp Yanmar, Hyd.coupler, 2,083# capacity, cab, A/C, 10,365 lbs .........$49,500
Call Steve Samosky • 262/373-2151 2-3 JM
2008 New Holland L160, 290 hrs, 66” tooth bar bkt, 46 hp,single speed, OROPS, 1,600# capacity, 5,534 lbs.....$19,700
Call Steve Samosky • 262/373-2151 2-3 JM
2005 Cat 287B, 1,485 hrs, OROPS, 82 hp, 10,300 lbs, 80”bkt, 2,520# capacity ..................................................$24,600
Call Steve Samosky • 262/373-2151 2-3 JM
2009 New Holland L185, 1,900 hrs, 72” bucket, cab, heat, 2 speed, 2,500# capacity, 82 hp, 7,100 lbs...............$24,900
Call Steve Samosky • 262/373-2151 2-3 JM
2007 New Holland L190, 850 hrs, 78” bucket, OROPS, 90hp, 2 speed, 2,800# capacity, cold start, 7,765 lbs...$25,900
Call Steve Samosky • 262/373-2151 2-3 JM
2000 New Holland LS180, 3,000 hrs, 72” bucket, 2,555#capacity, OROPS, 2 speed, 67 hp, 7,223 lbs.............$12,300
Call Steve Samosky • 262/373-2151 2-3 JM
Here's how the BARGAIN ADS Work:
• Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number.
• Either email your copy & photo to: [email protected], or mail to:Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.
• Cost is $95 per ad, $50 additional for color.
• Your ad will run for two consecutive issues in 1 region.
Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyersin the Midwest States.
For more information, call Construction Equipment Guide today at
800/523-2200
This bracelet was a gift Amber Apodoca
received from the center where she helped teens with
drug and alcohol problems. She was wearing it
when an underage drunk driver took her life.
Friends Don’t Let Friends Drive Drunk.
Pho
to b
y M
icha
el M
azze
o
Altorfer Inc. Says Farewell toDick Rupp, Welcomes Tom WillAltorfer Inc. welcomes Tom Will as store
manager of the Hannibal, Mo., constructionlocation, effective Jan. 1, 2013. Will replacesDick Rupp following his retirement on Dec.31, 2012.Mark Hanson, vice president of the
Altorfer Construction Division, said Willand Rupp have been working side by sidesince September to ensure a smooth transi-tion.“Dick Rupp embraced his position with
passion, led by example, and has built a greatteam at Hannibal over the years,” saidHanson. “We are excited to bring Tom Willon board, who shares the same enthusiasmfor our industry and for our company. Tomhas the values, skills and personal traits nec-essary to help Altorfer continue to succeed inHannibal following Dick’s retirement.”�Rupp retired after 45 dedicated years of
service. He began his career at the Hannibalfacility working with undercarriage and thenmoved into the main shop as a technician. In1977, Rupp became machine inspector andassisted with diagnostics, and shortly afterbecame a product support sales representa-tive, covering the majority of Altorfer’s
Missouri service territory. In 1993, he waspromoted to his most recent position asHannibal store manager.Will joins Altorfer with 25 years of expe-
rience in the construction equipment indus-try, where he has gained both direct sales and
management experience in all facets of thebusiness, including machines, parts andservice. Altorfer wishes Rupp a happy retirement,
and congratulations to Will on his new posi-tion.For more information, visit www.altor-
fer.com.
“Dick Ruppembraced hisposition withpassion…”
Mark HansonAltorfer Construction Division
Page 78 • February 2, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
NEED 12 MONTHS BULLDOZER D3ATD10 1978 AND UP. WANT TO BUY FROMCONTRACTOR ONLY. BULLDOZER NOTADVERTISED USA.CONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975 OR 1 514 386 8975EMAIL:[email protected]––––––––––––––––––––––––––––––––TEREX TR100 | LOOKING FOR TEREXTR100 DUMPTRUCKS, 2-4 UNITS. MUST HAVE EPA.CONTACT: JERRYPHONE: 0031227570364EMAIL: [email protected]––––––––––––––––––––––––––––––––MOTOR GRADERS | WE ARE LOOKINGTO PURCHASE SEVERAL UNITS OF140H (99 - 02), AND 14 G/H (72 - 00)CATERPILLAR MOTOR GRADERS,PREFERABLY WITH RIPPER. GRADERSMUST BE GOOD LOOKING AND INWORKING CONDITION WITH OLDPAINT. SEND PICTURES, CONDITION,SERIAL NUMBER AND FINAL OFFERPRICE.CONTACT: AIMN BLBOLPHONE: +971504814823EMAIL: [email protected]––––––––––––––––––––––––––––––––LOOKING FOR LARGER IMPACTCRUSHERS - SCREENS - CONVEYORS -SCALES IN THE MIDWEST REGION.EMAIL: [email protected]––––––––––––––––––––––––––––––––USED CARGO VANS | WANTED 100USED CARGO VANS FLEETS ONLY,AS MANY AS POSSIBLE NO DEALERSPLEASE.CONTACT: FRANKPHONE: 570-562-3291EMAIL: [email protected]––––––––––––––––––––––––––––––––CATEPILLAR GRADER 12G AND 140G |IF YOU HAVE ANY IN STOCK PLEASESEND PICTURES AND DETAILS.CONTACT: RIZ SUNESARAPHONE: 832-528-0786FAX: 281-727-0415EMAIL:[email protected]––––––––––––––––––––––––––––––––CATERPILLAR 926E AND 936F | I NEEDURGENT CAT 930, 926E AND 936F,PLEASE SEND ME PICTURES ANDDETAILS.CONTACT: ABDAL SALEEMPHONE: 966 3 842 8312FAX: 9666 3 312326EMAIL:[email protected]––––––––––––––––––––––––––––––––ANY CONSTRUCTION EQUIPMENTWANTED | LOOKING FOR CAT 330CL/DL <3000 HOURS, AUX HYD. FORCONTRACTOR EXCAVATORS DOZERSLOADERS COMPACTORS ARTICULAT-ED TRUCKS OFF HIGHWAY TRUCKSMOTOR GRADERS SCRAPERS ONROAD TRUCKS BUYING OR SELLINGLET JOE KNOW!CONTACT: JOEPHONE: 570-360-5162EMAIL: [email protected]––––––––––––––––––––––––––––––––
CONSTRUCTION | WANTED**** ANYLONG REACH BOOMS OR STICKS.LONGER THEN NORMAL BOOM ORSTICK. LONG REACH EXCAVATORFRONTSCONTACT: TYLER PALUMBOPHONE: 330-365-0654EMAIL: [email protected]––––––––––––––––––––––––––––––––MOBILE TRAILERSEMAIL:[email protected]––––––––––––––––––––––––––––––––LOOKING FOR BACKHOES. PLEASECALL OR EMAIL WITH WHAT YOUHAVE.CONTACT: CODYPHONE: 1(810)834-2571EMAIL:[email protected]––––––––––––––––––––––––––––––––TELEHANDLER | 6-8,000 LBS TELEHAN-DLER WITH 40FT REACH. 2005 ORNEWERCONTACT: MANAGERPHONE: 618 789-0449FAX: 8886510449EMAIL:[email protected]––––––––––––––––––––––––––––––––ATLAS COPCO | ATLAS COPCO’S XAS750 JD7 TIER 4A COMPRESSOR MEETSNEW EMISSION STANDARDS. SENDASKING PRICECONTACT: MR MO ALABEDEPHONE: 00353899674351EMAIL: [email protected]––––––––––––––––––––––––––––––––PILE HAMMERS | ALWAYS SEEKING TOPURCHASE VIBRATORY PILE HAM-MERS OF BRANDS ICE, PVE, APEAND/OR MKT. QUICK CASH AVAILABLEFOR YOUR USED/SURPLUS PILE HAM-MERS. EMAIL WITH PICS/SPECS ONYOUR SURPLUS PILE HAMMERS.CONTACT: JEFF LAWSONPHONE: 864-542-4369EMAIL: [email protected]––––––––––––––––––––––––––––––––WE SELL ALL KINDS OF EQUIPMENTMANUALS. GIVE US A CALL, WE MIGHTHAVE WHAT YOURE LOOKING FOR.CONTACT: GRACE FRANCESPHONE: 270-849-2270EMAIL: [email protected]––––––––––––––––––––––––––––––––LULL 844 TT 34 PARTS MACHINE ORPARTS NEW OR USED.CONTACT: SEANPHONE: (815)566-0442FAX: (815)827-3246EMAIL:[email protected]––––––––––––––––––––––––––––––––KOMATSU PC308 TRACK EXCAVATOR |LATE MODEL, LOW HOUR EAST COASTUSA LOCATIONCONTACT: RICHARDPHONE: 603 828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––OLD CHAMPION ROAD GRADERCONTACT: ALVIN WALDNERPHONE: 605-778-6776FAX: 605-778-6778 |EMAIL:[email protected]––––––––––––––––––––––––––––––––
NEEDED BULLDOZER D6N LGP ENCCAB USER USA LOW HOURS LOWPRICE • WANT TO BUY FROM USA«CONTRACTORS D6N LGP D7G D8KCONTACT: JEAN MAURICE BOUTINPHONE: 1-450-346-8975 OR MOB 1-514-386-8975EMAIL:[email protected]––––––––––––––––––––––––––––––––WE BUY EQUIPMENT MANUALS (USEDOR NEW). WE PREFER 100 OR MORE.CONTACT: GRACE FRANCESPHONE: 270-849-2270EMAIL: [email protected]––––––––––––––––––––––––––––––––CATERPILLAR D8R DOZEREMAIL: [email protected]––––––––––––––––––––––––––––––––WE NEED 2X 50T RIGID DUMP TRUCK.PRICE ~ 50K USD.CONTACT: JERRYPHONE: 0031227570364EMAIL: [email protected]––––––––––––––––––––––––––––––––CAB OR CANOPY FOR AN OLDER CAT120 GRADER • WE ARE LOOKING FORAN ENCLOSED CAB OR CANOPY FORA CATERPILLAR 120 MOTORGRADER. •THINK THAT A CAB OR CANOPY OFFOF A 12E OR F WILL WORK ALSO.PLEASE OFFER WHAT YOU HAVE.CONTACT: WENDELL CAINPHONE: 001-770-381-8984FAX: 001-770-381-6977EMAIL:[email protected]––––––––––––––––––––––––––––––––BOBCAT SKID STEER LOADERS • AMLOOKING FOR CONTRACTORS ORLANDSCAPERS WHO ARE LOOKING TOSELL THEIR USED BOBCAT BRANDSKID STEER LOADERS THAT ARELOCATED IN THE SOUTH EASTERNUNITED STATES. • PREFER LARGEFRAME MACHINES, S330, S300, S250,T320, T300, T250 EQUIPPED WITH THE"GOLD PACKAGE", BUT I WILL BUYANY BOBCAT THAT YOU HAVE FORSALE. DONT TRADE IT IN, SELL IT TOME. **DEALERS - DONT WASTE YOURTIME RESPONDING**CONTACT: WARRENEMAIL: [email protected]––––––––––––––––––––––––––––––––AM LOOKING TO BUY CONSTRUCTIONEQUIPMENT REPAIR MANUALS FORLATE MODEL NAME BRAND CON-STRUCTION EQUIPMENT.CONTACT: WARRENEMAIL: [email protected]––––––––––––––––––––––––––––––––ROTO TILLER ATTACHMENTPHONE: 250-378-7505EMAIL: [email protected]––––––––––––––––––––––––––––––––1000 OR MORE ROAD MACHINERY.CONTACT: SAEED.MPHONE: +98-912-472 29 89FAX: +98-21-48 62 295EMAIL:[email protected]––––––––––––––––––––––––––––––––
DRI PRIME DIESEL PUMPS • 6X6 AND12X12 VACUUM OR VENTURI DIESELPUMPSCONTACT: MICHAEL COPPOLAPHONE: 973-962-1890FAX: 973-962-9112EMAIL:[email protected]––––––––––––––––––––––––––––––––TOWERS/STEEL STAIR CASES, STEELLADDERS WANTED IN EXCHANGE FORDEER HUNTING. WWW.SIKASTAG.COMCONTACT: PERCY RANSOMEPHONE: 215-350-1165EMAIL: [email protected]––––––––––––––––––––––––––––––––ESTACION TOTAL TOPCON GTS 105NCONTACT: GONZALO REYES MOSCOSOEMAIL: [email protected]––––––––––––––––––––––––––––––––LOOKING TO PURCHASE USEDKAWASAKI WHEEL LOADERS FROM50Z TO 95Z (SERIES II, IV, V), YEARMODEL 2003 AND BELOW. MACHINESMUST BE GOOD LOOKING AND INWORKING CONDITION WITH OLDPAINT. PLEASE SEND PICTURES, YEARMODEL, SERIAL NUMBER, MACHINECONDITION AND FINAL OFFER PRICE.CONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL: [email protected]––––––––––––––––––––––––––––––––TRADE TWO 29529 FIRESTONE SUPERROCK GRIP TIRES 60% FOR TWO 29529DIRT TIRESCONTACT: KEVIN SANSALONEPHONE: 856-297-4758FAX: 856-362-5602EMAIL:[email protected]––––––––––––––––––––––––––––––––HEAVY HAUL MURRAY TRAILER •LOOKING FOR A GOOD USED MURRAYTRAILER TO HAUL 623 SCRAPERS,WATER WAGONS, 47 TON OVER THEBACK LOADING, EXPANDABLE RUN-NING GEAR, DETACHABLE WIDE NECKWITH A 21’ 6" DECK.CONTACT: EMMETT O LEARYPHONE: 520-349-3526FAX: 520-798-0740EMAIL:[email protected]––––––––––––––––––––––––––––––––UNDER SLUÑG CRANE ROLLERS 5TON• S TYPE BEAM TAPER FLANGE15IN./5.5IN.WIDE (NEED 3)CONTACT: MIKE FEMOYERPHONE: 904-497-9285EMAIL: [email protected]––––––––––––––––––––––––––––––––A WELL DRILLER THAT CAN BE OPER-ATED BY ONE OR TWO PEOPLE.CONTACT: B. SMITHPHONE: 509-368-9174EMAIL: [email protected]––––––––––––––––––––––––––––––––
CAT 307 OR CAT 308 EXCAVATOR • CANBE ANOTHER BRAND EQUAL SIZE.NEEDS TO HAVE LEVELING BLADEAND HYD THUMB. OFFSET BOOMWOULD BE NICE. MID 90 MODEL.UNDER 20,000CONTACT: BEN SEAYPHONE: 706-871-0100EMAIL: [email protected]––––––––––––––––––––––––––––––––WE ARE LOOKING TO BUY DOZER D9ROR D9N FROM 1990 UP TO 1997CONTACT: OUFIPHONE: 966 530185141EMAIL: [email protected]––––––––––––––––––––––––––––––––CONCRETE CORE DRILL AND 6" BIT,AND TRENCH BOX 20X10 WITH 42" AND30" SPREADERSCONTACT: ROMEY WILLIAMSONPHONE: 3042725923FAX: 3042725823EMAIL:[email protected]––––––––––––––––––––––––––––––––LOOKING FOR CATERPILLAR WHEEL-LOADERS & HITACHI EXCAVATORS •WE NEED THE FOLLOWING CATERPIL-LAR WHEEL LOADERS 950, 950B, 950E,966F & HITACHI EXCAVATORS EX200,EX400. FEEL FREE TO CONTACT US.CONTACT: HIDAYAT KHANPHONE: +92-345-8818803EMAIL:[email protected]––––––––––––––––––––––––––––––––PICK UP TRUCK, SUBURBANCONTACT: BOONE RACING ENT.PHONE: 301-898-9195, 301-471-9634EMAIL:[email protected]––––––––––––––––––––––––––––––––2006 JCB 3CX BACKHOE • IN GOODCONDITIONCONTACT: AFOLABI JIBRILLPHONE: +233 24 678 8504FAX: +233 30 321 5630EMAIL:[email protected]––––––––––––––––––––––––––––––––HYDRAULIC THUMB TO FIT 1999 EX 160HITACHI EXCAVATOR WITH ALL PIPING& CONTROLS, ALSO QUICK COUPLERHYDRAULIC OR MANUAL. UPPER MID-WEST, SEND PICTURES AND BESTPRICECONTACT: DOUG GYSBERSPHONE: 507-291-0178FAX: 507-263-4106EMAIL:[email protected]––––––––––––––––––––––––––––––––KOMATSU / HITACHI 200 SIZE EXCAVA-TOR • MID 90S MACHINE, EAST COASTLOCATIONCONTACT: RICHARDPHONE: 603-828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––USED CAT 928 AND 930 MODEL 1999AND 2000 • LOOKING TO BUY USEDCAT MODEL 1999 AND 2000 WITHGOOD CONDITIONING, LOOKING FOR 3CAT WHEEL LOADERS, 930 AND 928CONTACT: MAMDOUHPHONE: 509-328-9733EMAIL: [email protected]––––––––––––––––––––––––––––––––
CRANECONTACT: RAFEEC KOTTIKKULONPHONE: 0096597298681EMAIL:[email protected]––––––––––––––––––––––––––––––––USED RUBBLE MASTER RM 60 OR 80CRUSHER.CONTACT: BARUN SHARMAEMAIL: [email protected]––––––––––––––––––––––––––––––––WHEEL LOADER 966D, 966E, 936E •WANT TO BUY WHEEL LOADERS LIKETHESE MODEL 966D, E 936E 950D.CONTACT: SAUDPHONE: 5623918774FAX: 5623918774EMAIL: [email protected]––––––––––––––––––––––––––––––––30-40 HP SELF-PROPELLED CONCRETESAWCONTACT: WILLIAM KANAYANPHONE: 909-337-5428FAX: 909-337-4894EMAIL:[email protected]––––––––––––––––––––––––––––––––MIGHTY MURCH RAM HEAD PART#MM10642 • LOOKING FOR A REPLACE-MENT PART FOR A MIGHTY MURCWOOD SPILTTER MODEL # MM10642RAM HEAD ORIGINAL PURCHASE DATE1994CONTACT: JILLPHONE: 1-256-431-4143EMAIL: [email protected]––––––––––––––––––––––––––––––––GENERATOR WHISPER WATT • LOOK-ING FOR A WHISPER WATT WITH 20 KWSINGLE PHRASE OR SINGLE & 3PHRASECONTACT: RUSSPHONE: 1-925-449-1958EMAIL: [email protected]––––––––––––––––––––––––––––––––GEHL 7810 E |CONTACT: ALANPHONE: 785-293-2110EMAIL: [email protected]––––––––––––––––––––––––––––––––CHIPPERCONTACT: CARLOS SIERRAPHONE: 787-479-2300EMAIL: [email protected]––––––––––––––––––––––––––––––––JOHN DEERE 690 EXCAVATOR • BUCK-ET TEETHCONTACT: MATTHEW FOERSTERPHONE: 972-437-5137EMAIL:[email protected]––––––––––––––––––––––––––––––––HOOK LIFT TRUCK 33, 000 GVW •INTERNATIONAL OR SIMILAR 33,000GVW 2002 OR NEWERCONTACT: TOM FLINTPHONE: 201-207-1041FAX: 201-754-9752EMAIL:[email protected]––––––––––––––––––––––––––––––––ASPHALT ZIPPER | WTB ASPHALT ZIP-PER ANY SIZE NO DEALERS PLEASECONTACT: JAMES MANNPHONE: 404-273-9424FAX: 770-306-2962 |EMAIL:[email protected]––––––––––––––––––––––––––––––––
Attention Contractors!Post Your Wanted To Buy Listings FREE!
Here’s How! List Your Wanted ItemsIf you would like to place your Wanted To Buy listings on our website
for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 2, 2013 • Page 79
ALEX LYON & SON
AUCTIONEERS
www.lyonauction.com
315-633-2944�
•�Kissimmee,�FLSat.-Sun.,�February�2-10,�2013For:�Annual�9�Day�Auction!Construction�Equipment,�Trucks,Trailers,�Support
•�Iowa�City,�IAWed.,�March�13,�2013For:�Construction�Equipment,Attachments,�Trucks�andTrailers
•�Las�Vegas,�NVSat.,�March�16,�2013For:�Late�Model�Rental�FleetEquipment
•�Atlantic�City,�NJThurs.-Sun.,�March�21-24,�2013For:�Construction�Equipment,Trucks�and�Trailers
•�Adams�Center,�NYSat.,�May�4,�2013For:�Construction�Equipment300+�Collectible�Cars,�1940-1970,�US�Army�Jeeps�and�More
RITCHIE BROS.
AUCTIONEERS
www.rbauction.com
402-421-2631
•�Houston,�TXFebruary�6-7,�2013
•�Las�Vegas,�NVFebruary�8,�2013
•�Phoenix,�AZFebruary�12-13,�2013
•�Tipton,�CAFebruary�15,�2013
•�Orlando,�FLFebruary�18-23,�2013
•�Chehalis,�WAMarch�5,�2013
•�Fort�Worth,�TXMarch�5-6,�2013
•�Salt�Lake�City,�UTMarch�8,�2013
•�Denver,�COMarch�12,�2013
•�Los�Angeles,�CAMarch�19,�2013
•�Sacramento,�CAMarch�22,�2013
BAR NONE AUCTION
www.barnoneauction.com
866-372-1700�
•�Sacramento,�CASat.,�February�9,�2013For:�Construction�Equipment
•�San�Bernardino,�CASat.,�February�23,�2013For:�Construction�Equipment
•�Sacramento,�CASat.,�March�9,�2013For:�Construction�Equipment
DEANCO AUCTIONS
www.deancoauction.com
601-656-9768
•�Philadelphia,�MSMarch�20-22,�2013For:�12th Annual�SpringtimeContractors�Equipment�Auction
•�Philadelphia,�MSMay�29-30,�2013For:�Construction�Equipment
•�Philadelphia,�MSJuly�17-18�2013For:�Construction�Equipment
•�Philadelphia,�MSSeptember�18-19,�2013For:�Construction�Equipment
•�Philadelphia,�MSNovember�20-21,�2013For:�Construction�Equipment
DEL PETERSON & ASSOCI-
ATES
www.delpeterson.com
�800-492-9090
•�Springfield,�ILThurs.,�January�31�2013For:�Construction�and�FarmEquipment
•�Online�OnlyClosing�February�5,�2013For:�Late�Model�John�DeereFarm�Equipment
•�Online�OnlyThurs.,�February�19,�2013For:�Construction�and�FarmEquipment,�Trucks�and�Trailers
DON SMOCK
AUCTION CO., INC.
www.dsa-auctions.com
765-778-9277
•�Pendleton,�INMarch�29,�2013For:�Construction�Equipment
•�Pendleton,�INJune�21,�2013For:�Construction�Equipment
•�Pendleton,�IN
September�20,�2013
For:�Construction�Equipment
•�Pendleton,�IN
December�13,�2013
For:�Construction�Equipment
GLOBAL FORCE
AUCTION GROUP
www.gforceauction.com
�877-631-0650
•�Online�Only
February�26-27,�2013
For:�Construction�Equipment
•�West�Friendship,�MD
Sat.,�March�2,�2013
For:�Part�2�of�Liquidation�of�New
River�Landscapes�and�Local
Contractors
HESS AUCTIONEERS
www.hessauctioneers.net
�866-511-2493
•�Marietta,�PA
Fri.,�February�22,�2013
For:�Construction�Equipment,
Trucks�and�Trailers
HILCO INDUSTRIAL, LLC
www.hilcoind.com
�847-313-4747
•�Tuscaloosa,�AL
March�20-21,�2013
For:�Construction�Equipment
HUNYADY AUCTION COMPANY
www.hunyady.com
�800-233-6898
•�Laflin,�PA
Wed.,�March,�13�2013
For:�Construction�Equipment,
Trucks�and�Attachments
IRON PLANET AUCTIONS
www.ironplanet.com
�888-433-5426
ONLINE�AUCTIONS
•�ONLINE�ONLY
February�26-28,�2013
For:�Construction�Equipment
J.M. WOOD
AUCTION COMPANY
www.jmwood.com
�800-447-7085
•�Montgomery,�AL
Wed.-Fri.,�March�6-8,�2013
For:�40th Anniversary�Gigantic
Equipment�Auction
NUTT AUCTION
COMPANY
www.nuttauction.com
903-748-4400
•�Garland�City,�AR
Sat.,�February�16,�2013
For:�Annual�Garland�City�Spring
Equipment�Auction
MARTIN & MARTIN
AUCTIONEERS, INC.
www.mmaauction.com
�800-763-2728
•�Charlotte,�NC
Thurs.,�February�7,�2013
For:�Construction Equipment
•�Brooklyn,�MS
Sat.,�February�23,�2013
For:�Construction Equipment
•�Bluefield,�WV
Thurs.,�March�14,�2013
For:�Construction Equipment
MYRON BOWLING
AUCTIONEERS, INC.
www.myronbowling.com
�513-738-3311
•�Tuscaloosa,�AL
Wed./Thurs.,�March�20-21,�2013
For:�Well�Maintained�Highway
Construction�Equipment
NITKE AUCTIONS
www.nitkeauctions.com
�715-362-6162
•�Wausau,�WI
April�26-27,�2013
For:�Wisconsin�Area�Contractors
PETROWSKY
AUCTIONEERS INC.
www.petrowskyauctioneers.com
�860-642-4200
•�North�Franklin,�CT
Wed.-Fri.,�March�14-16,�2013For:�Construction�Equipment
PURPLE WAVE AUCTION
www.purplewave.com
�866-608-9283
•�ONLINE�ONLYThurs.,�February�14,�2013For:�Construction�Equipment
•�ONLINE�ONLYThurs.,�February�28,�2013For:�Construction�Equipment
QUANTOS AUCTIONS
www.quantosauctions.com
253-236-8555
•�ONLINE�ONLYMarch�13,,�2013For:�Construction�Equipment
UTILITY AUCTIONS
www.utilityauctions.net
�302-530-9103
•�Wilmington,�DE
Fri.,�February�22,�2013For:�Construction and UtilityEquipment
VAUGHAN AUCTION GROUP
www.vaughanauctiongroup.com
�903-873-6777
•�Wills�Point,�TX
Thurs.,�February�28,�2013For:�Annual Contractors Auction
WESTERN CONSTRUCTION
AUCTIONS INC.
www.wca-online.com
�760-731-7760
•�Perris,�CAThurs.,�February�14,�2013For:�Construction�Equipmentand�Trucks
YODER & FREY
AUCTIONEERS, INC.
www.yoderandfrey.com
�419-865-3990
•�Kissimmee,�FL
February�11-18,�2013For:�Construction�Equipment,Trucks�and�Trailers
AuctionsComing
Page 80 • February 2, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
AED Holds Annual Summit, CONDEX Show in Vegas
Pete (second from R) and Cindy Baschmann (R), BaschmannServices, Buffalo, N.Y., examine replacement parts available fromMinnPar and Avant represented here by Art Ashworth (L),MinnPar, and Bill Grundy, Avant.
IROCK manufactures crushing and screening plantsavailable from distributors across the country. (L-R)are Sean Donaghy, national sales manager; RobertNelson, general manager; and Terry Wilson, regionalsales manager.
Maeda introduces a new compact crane for the con-struction and industrial markets with its newest deal-er, Woods CRW Corp., headquartered in Burlington, Vt.,with locations serving all of New England. (L-R) areTony Inman, Maeda; Chris Palmer and Mike Sylvia,both of Woods CRW; andJohn Carpenter, Maeda.
Merle Patzkowsky (L), managing partner,Waldon Equipment, shakes hands with JimCornelson, president, sales, Broce/Waldon,during the AED CONDEX show in LasVegas.
Pine Bush Equipment is now working with E-Emphasis to streamline its internalcommunication systems and data management. (L-R) are Milind Bagade andShriram Rajagopal, E-Emphasis; Holly Bodnar, Mark Hufcut and Tammy Hufcut, allof Pine Bush Equipment.
Proxibid is an innovator at assisting auction compa-nies with collecting their bids and potential buyersonline.
(L-R) are Bill Chaney; Darrell Banks; Amy Banks; andBarre Banks, all of Midland Manufacturing, headquar-tered in Buffalo, N.Y.
AED from page 22
Hydrema introduces the new model 912 flatbed truck to address another uniqueniche in the off-road construction truck market. (L-R) are Alan Patterson, AlbertaConstruction Equipment; Chris Binder, executive vice president, Hydrema; KevinO’Donnell, national sales manager, Hydrema; Sterling Roberts, national servicemanager, Hydrema; and Tom Hartman, regional business manager, Hydrema.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 2, 2013 • Page 81
Page 82 • February 2, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Purple Wave Provides Easy Way to Sell Used EquipmentPurple Wave, the largest no-reserve
Internet auction firm in the country, special-izes in liquidating equipment and vehiclesthrough online auctions. Customers with oneitem as well as those with a whole fleet tosell will find that Purple Wave provides aneasy, straightforward way to sell used equip-ment quickly and effi-ciently, according tothe company.
The Purple Waveapproach to auctionsmaintains the tradi-tional auction experi-ence for buyers andsellers, but affords theconvenience thatcomes with theInternet in a number of ways.• Purple Wave offers turnkey service from
start to finish including photographingcustomer assets, writing item descrip-tions, uploading to the web site, advertis-ing and promoting the auction, selling tothe highest bidder, collecting the moneyand sending the customers settlementchecks.
• Selling with Purple Wave does not incurrelocation costs. No need to transportequipment to an auction site. Purple Wave
sells “as is, where is” eliminating all trans-portation costs.
• Fast turnaround. Regularly scheduled auc-tions, no waiting for a sale. A typicalmonth includes auctions specific to con-struction, agriculture and trucks/trailers.
• No reserve auctions. Bidders compete
with one another, increasing the value ofitems.Recently recognized by Inc. Magazine as
one of the fastest growing private companiesin the United States, Purple Wave boastsapproximately 100,000 registered buyersand 250,000 monthly visitors to purple-wave.com, helping sellers reach a muchbroader marketplace than traditional auc-tions.
For more information, visit www.purple-wave.com.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 2, 2013 • Page 83
100% Online
lanet online
onPr, the Is back’tI y tessarida is not nec
lorFed not list
our equipmenet yG om oers fr
tion evy aucebruaronly F-lanet online ear whis yT. t saleeare a gvo ha avida shipping needed f
lor. No Fwed noies will be look
trouner 100 cvm o ov
ear thaed last yvov p
W
.
tention ev .e selling 100% online
e prW.
e arear wida trlor, no For sellers
t
on. Dtt this equipmen
aing a needed f
ook ki
t shipping or ear tha
.ersor buyed fq
el r
v
a ida tr
t miss this global sale!equirel rva
’on
et yG om oers frer 50,000 buy
vO
er 100 cvm o ov
. 26FEB
-28. 26
Page 84 • February 2, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Col. Raymond S. Henry - WI Lic. # 2490-52; MN Lic. # 05-12-11Real Estate Auctioneer & GPPA Certified Equipment Appraiser
or Email [email protected]
Accepting Excavators, Dozers, Loaders,Semis, Trucks,
Trailers and Related Equipment!
For a complete list of upcoming auctions visit www.iraymn.com
Jct MN Hwys 95 & 25Foley, MN
Accepting ConsignmentsUntil Noon Sat. March 2nd
‘95 D5H LGP13’3” Blade, 3304 Engine, U/C 75%, SN DD06239
Dale’s Auto Body - Complete LiquidationAll Tools and Equipment Must Go!
Inspection: Monday, Feb 18 Noon - 4pm
Cloud Computing Will Transform Some Areas of IndustryU.S. Economic Outlook Report and U.S.Equipment Finance Market Study 2012-2013, industry participants’ expertise, andmember input from ELFA meetings andconferences to provide our best insight forthe top 10 Equipment Acquisition Trends for2013.”ELFA issued the following Top 10
Equipment Acquisition Trends for 2013 tohelp businesses with their strategic equip-ment acquisition plans:
1. Corporate perceptions of the eco-nomic outlook will be a primary driver ofbusiness investment decisions. Despitepressing considerations such as technologi-cal innovations and aging equipment, theeconomy will be the true barometer forwhether or not businesses acquire newequipment in 2013.
2. Equipment investment will pick upin the second half of 2013. Equipmentinvestment will grow this year, although therate of growth will be hampered by fiscaluncertainty. Some companies will remaincautious about taking on large capital invest-ments even now that important decisionsimpacting short-term fiscal stability havebeen made. Equipment acquisition activity
will gain momentum through relief from thepolicy uncertainty that brought the economyto the edge of the fiscal cliff. An improvinghousing sector will provide an added boost.
3. Pent-up demand will spur invest-ment across varied equipment types.Demand for replacement equipment willdrive investment in the construction, agricul-ture and transportation categories in particu-lar, while other equipment types will awaitthe replacement cycle. However, greatereconomic improvements will be neededbefore significant equipment investmentexpansion takes place.
4. A continuing low interest rate envi-ronment will enable companies to acquirethe equipment they need and conservecash. The prospect of continued low interestrates at least through 2014 will be an incen-tive for businesses to acquire equipmentthrough financing and still hold on to theircash for uncertainties. In addition to main-taining cash flow, equipment financing willhelp businesses preserve capital andimprove expense planning in challengingeconomic conditions.
5. A majority of U.S. businesses will usesome form of financing for equipment
acquisition. In 2013, $742 billion (55 per-cent) of the projected $1.3 trillion investmentin plant, equipment and software investmentin the United States will be financed throughloans, leases and lines of credit. Seven out of10 businesses will use at least one form offinancing to acquire equipment.
6. Business size will impact equipmentacquisition. Size will matter when acquiringequipment in 2013. Primarily larger busi-nesses anticipate increasing equipmentspending over the next 12 months. Smallcompanies’ high degree of concern aboutgeneral economic conditions and less accessto credit will temper their equipment acqui-sition plans.
7. The gaining prominence of cloudcomputing will transform the way busi-nesses pay for IT investments. Along withchanges in how companies consume soft-ware and hardware, cloud computing willspawn new financing options. Companieswill look to equipment financiers for vari-able payment structures in the cloud.
8. Credit market conditions will remainfavorable for long-term equipmentfinancing. Businesses will generally find animproving credit supply as they consider
equipment acquisitions.9. The one-year extension of bonus
depreciation may provide incentives for
businesses to acquire equipment. The con-tinuation of the depreciation bonus willallow businesses to deduct up to 50 percentof the cost of new equipment purchases in2013.
10. Although the value of lease financ-
ing will remain, businesses will begin to
adapt their equipment acquisition strate-
gies to comply with long-awaited changes
to lease accounting standards.A new draftof proposed changes to lease accountingstandards by the Financial AccountingStandards Board and the InternationalAccounting Standards Board should beannounced this year, enabling businesses tobegin to evaluate how their balance sheets,earnings and other financials will be affectedby equipment financing agreements. For a video that discusses the Top 10
Equipment Acquisition Trends for 2013,visit http://www.equipmentfinanceadvan-tage.org/Articles/10Trends.cfm
ELFA from page 1
Survey Indicates Construction CompaniesWill Continue to Invest in IT Infrastructureavoid having to pay for idle equipment during lags in con-struction activity, the economist noted. Even as they shifttoward more leasing, firms’ appetite for new equipmentremains modest, with two-thirds of the firms planning to buyand 73 percent planning to lease $250,000 or less in equip-ment this year.��Contractors also report being squeezed byrising costs for health insurance and construction materials.Seventy-five percent of firms reported paying more forhealth care coverage in 2012 and 77 percent expect to payeven more in 2013. Meanwhile, 88 percent of firms report-ed paying more for construction materials last year while 90percent expect to pay more for their supplies this year.However, contractors are increasingly optimistic about theirability to raise bid levels. Twenty-eight percent of firmsexpect to increase the amount they charge for constructionthis year, nearly double the 15 percent of firms that increasedprices in 2012.An increasing number of construction firms — 38 percent
in 2012 compared to 35 percent in 2011 — report usingBuilding Information Modeling services, also known asBIM, association officials noted. And 43 percent report theyexpect the use of BIM to increase in 2013. In addition, morefirms report working on public private partnerships, whichleverage private-sector dollars to finance public projects.Thirty-seven percent of firms report being involved in thesekinds of projects in 2012 and 97 percent expect demand for
these kinds of privately financed projects to increase orremain stable in 2013.“The survey indicates that construction companies will
continue to make investments in their IT infrastructure,specifically in areas such as enterprise content management,mobile field applications and solutions that support self-service functions,” said Roger D. Kirk, CEO, ComputerGuidance Corporation.Kirk noted that 60 percent of firms report they plan to
invest in their information technology departments in 2013.He added that 73 percent of those firms report they expect toinvest over $10,000 in new information technology thisyear. However, a relatively small percentage of firms — 11percent — report they plan to purchase new financial andjob cost software in 2013, Kirk added. Similarly, only 9 per-cent of firms plan to lease or finance the purchase of newfinancial and job cost software in 2013.The outlook, which the association co-sponsored with
Computer Guidance, was based on survey results from morethan 1,300 construction firms from 49 states, the District ofColumbia and Puerto Rico. Contractors from every segmentof the industry answered more than 30 questions about theirhiring, equipment purchasing and business plans.Economists and specialists from the association andComputer Guidance analyzed those comments to craft theoutlook.
OUTLOOK from page 75
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 2, 2013 • Page 85
Page 86 • February 2, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ADVERTISER INDEX
The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.
ALEX PARIS CONTRACTING CO INC ......................................................9
ALLU GROUP ............................................................................................27
AMERICAN STATE EQUIPMENT ..............................................................11
ARING EQUIPMENT CO INC....................................................................19
BANDIT INDUSTRIES INC ........................................................................37
BARGAINS............................................................................................76,77
BLANCHARD MACHINERY INC ..............................................................24
CAT AUCTION SERVICES
FLORIDA ..........................................................................................81
CEG SCALE MODELS ..............................................................................20
CLASSIFIEDS ............................................................................................74
CONSTRUCTION EQUIPMENT GUIDE
WANTED ..........................................................................................78
AUCTION TRIPLE PLAY ..................................................................85
IN PRINT OR WEB ..........................................................................42
EXCAVATOR & ATTACHMENTS PROMO ......................................58
CUSTER PRODUCTS LTD........................................................................68
DOOSAN INFRACORE AMERICA CORP ............................................44,45
DOOSAN PORTABLE POWER ................................................................59
DOPPSTADT..............................................................................................38
DYNAPAC ..................................................................................................62
E TIP INC ..................................................................................................26
ERB EQUIPMENT......................................................................................15
EXODUS MACHINES ..........................................................................30,31
FABCO EQUIPMENT INC............................................................................7
FABICK CAT..........................................................................................13,35
FARM-RITE EQUIPMENT INC ....................................................................8
FELLING TRAILERS ............................................................................64,65
FINKBINER EQUIPMENT CO....................................................................11
FLANGE LOCK ..........................................................................................23
FLUID CONTROL SERVICES ..................................................................24
GARY CARLSON EQUIPMENT ................................................................12
GRINDERCRUSHERSCREEN.COM ........................................................40
GROVE WORLDWIDE ..............................................................................61
H-E PARTS DISTRIBUTION ......................................................................75
HOWELL TRACTOR & EQUIPMENT CO ............................................75,88
HYDRAULICIRCUIT TECHNOLOGY ........................................................49
ILLINOIS TRUCK & EQUIPMENT ..............................................................3
IRAY AUCTION
FOLEY MN........................................................................................84
IROCK CRUSHERS ..................................................................................34
IRON PLANET ..........................................................................................83
JEFF BELZERS CHEVROLET ............................................................69,72
JJ SCHECKEL CORP ................................................................................23
JOB RENTALS AND SALES LLC ..............................................................26
JOHN DEERE ............................................................................................87
KAWASAKI CONSTRUCTION MACHINERY ............................................53
KOMATSU AMERICA CORP ................................................................56,57
KPI-JCI ......................................................................................................36
KUBOTA ....................................................................................................55
KUBOTA SVL ............................................................................................60
LEADING EDGE ATTACHMENTS INC......................................................49
M ADAMS EQUIPMENT CO......................................................................17
MCCANN INDUSTRIES INC........................................................................6
MERIT CHEVROLET ................................................................................67
METSO ......................................................................................................33
METSO MINERAL SCREENING ..............................................................39
MID COUNTRY MACHINERY....................................................................14
MIDWEST VIBRO INC ..............................................................................24
MUSTANG MFG ........................................................................................54
NATIONAL EQUIPMENT REGISTER ........................................................23
NORAM ......................................................................................................51
PATTEN TRACTOR & EQUIPMENT CO ....................................................2
POWERSCREEN MW DEALER................................................................41
PURPLE WAVE AUCTIONS ......................................................................82
RDO EQUIPMENT/SCHARBER EQUIPMENT..........................................18
ROAD BUILDERS MACHINERY ............................................................6,21
ROGERS BROTHERS CORP ..................................................................72
ROLAND MACHINERY INC ........................................................................5
RUDD EQUIPMENT ..................................................................................25
SENNEBOGEN ..........................................................................................43
SIDUMP'R ..................................................................................................71
SMITHCO ..................................................................................................68
STAR EQUIPMENT LTD ..............................................................................6
SUPERIOR INDUSTRIES..........................................................................40
TEREX CRANES ......................................................................................50
TITAN RENTS ............................................................................................27
TOWMASTER INC....................................................................................73
VANDER HAAGS ......................................................................................72
ZIPS TRUCK EQUIPMENT........................................................................70
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 2, 2013 • Page 87
EXPECT BIG THINGS.
Quarry, road-building, and mass-excavation work demand seriousiron. With more arm diggingforce, bucket digging force, andhydraulic flow, 670G LC and870G LC Excavators deliverincreased productivity. So you’llget more done per gallon of fuel.Their rugged EPA Interim Tier4/EU Stage IIIB diesels enableyou to work, wherever the work,even in nonattainment areas.These, plus numerous other cus-tomer-inspired refinements —including an even more spaciouscab and an enhanced multifunc-tion LCD monitor with simplifiednavigation — help your operatormake the most of every day.
www.holtequipment.net
Bowling Green, KY42101
270/842-34001-866/528-9699
London, KY 606/862-8447
1-877/231-7151
Louisville, KY 40223502/253-3721
1-800/507-9705
Richmond, KY859/623-2030
1-800/463-8722
Saginaw4600 AIS DriveP.O. Box 253
Bridgeport, MI 48722989/777-0090
Fax: 989/777-1583
Grand Rapids600 44th Street S.W.
Grand Rapids, MI 49548616/538-2400
Fax: 616/538-0449
Northeast Detroit65809 Gratiot AveLenox, MI 48050
586/727-7502Fax: 586/727-7311
West Detroit56555 Pontiac Trail
New Hudson, MI 48165 248/437-8121
1-800/457-8121
Traverse City8300 M-72 East
Williamsburg, MI 49690231/267-5060
Fax: 231/267-5257
Naperville, IL 60563630/355-7150
Fax: 630/355-7173
Rockdale, IL 60436815/730-9011
1-800/937-3355Fax: 815/730-9036
Rockford, IL 60012815/961-3160
Fax: 815/965-1810
South Holland, IL 60473708/331-6362
Fax: 708/331-7334
Wauconda, IL 60084847/526-7700
Fax: 847/526-3565
Bloomington, IN 47403812/333-9677
Fax: 812/333-9731
Fort Wayne, IN 46825260/482-8576
Fax: 260/483-4057
Indianapolis, IN 46219317/544-3411
Fax: 317/544-3420
Lafayette, IN 47905765/447-6933
Fax: 765/448-9038
South Bend, IN 46619574/232-1461
Fax: 574/233-3324
Des Moines, IA800/822-2212
Fort Dodge, IA800/362-2487
Sioux City, IA800/352-4693
Waterloo, IA800/772-2019
Dodge City, KS800/794-0172
Great Bend, KS800/264-4056
Park City, KS800/262-0139
Topeka, KS800/279-6087
Ulysses, KS800/472-9238
Kansas City, MO888/306-3434
Springfield, MO888/306-2656
Gering, NE800/205-6784
Grand Island, NE800/868-4017
Lincoln, NE800/416-5518
North Platte, NE800/894-7060
Omaha, NE800/416-5095
Brunswick, OH800/716-9796
Cambridge, OH740/439-2747
Canton, OH866/235-0438
Chillicothe, OH740/663-5300
Cincinnati, OH800/844-3734
Columbus, OH800/222-2010
Lima, OH800/423-7445
Painesville, OH866/800-1398
Poland (Youngstown),OH
866/503-7259
Vandalia (Dayton), OH800/233-4228
Cranberry Twp, PA724/776-3636
Delmont, PA724/837-4500
www.westsidetractorsales.com www.murphytractor.com
Page 88 • February 2, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE