Microtrol Engineering Inc

Microtrol Engineering Inc

Specification MEI1250-SB052721 2751 Plaza Del Amo Unit 304 - Torrance - California - 90503

www.microtrolengineering.com

ME-1250F Control Description MEI1250-SB052721

The ME-1250F CNC is a Fanuc based state of the art, multi axis stretch press control system that provides reliable stretching function with easy-to-use programming and operation functions. The system uses the Fanuc PMIa system with remote servo control modules to give the customer the best stretching solution. Below are the features the ME-1250F provides.

Hardware:

• 21.5 inch Touch screen with HMI control software

• Fanuc iHMI computer. • New multi-node Fanuc fiber optic system

for axis and machine control • New operator console and motion PB

interface • Up to 22 feedrate interpolated

servo/proportional valve axis control. • 12 solenoid axis position control • Feedrate override controls for carriage,

tension and tables • Solid state hard drive for program storage • Ethernet interface for customer networks • New Delta Servo Amplifiers • Fanuc absolute encoders for axis

positions on servo axes. • New Analog in/out for transducers and EHST pressure valves • Enhanced machine diagnostics screens and PMC Monitoring • USB Ports for offloading programs • New Hoffman industrial control console • New Stride industrial network switches for module communications.

http://www.microtrolengineering.com/




Software:

• Windows 7 or 10 Professional operating system • Customized HMI operator interface • 7 cycle selectable primary functions (Unload, Snug, Pre, Post, Stretch, Relax,

and Unload) • Each primary step can have up to 9999 sub steps. • Programming can be done on control and offline • 4 operation modes:

• Auto Mode - runs current program through all steps • MDI Mode - runs one manually entered Nblock line • Manual Mode - allows the operator to jog the machine • Teach mode - teach a new part program with manual move step

• Programmable screen indicators • Alarm Screen • Calibration screen for easy machine setup and calibration • Diagnostics Screens for PMC and all Nodes • Settings screen for machine parameters • 500 gigabyte Part program storage • Customer ethernet port for program transfer • Offline part program programming • Non-propriety part program format • Fanuc PMC ladder program access from main 17 CNC screen • HMI Program Source Code available • Axis Lag error detection on servo controlled axes • Axis synchronization error detection on Bulldozer, carriage and die table • Axis programmable soft travel limits • Axis non- movement on solenoid controlled axes • Force mode measurements on Die Table, carriages and Tension Cylinders • Bulldozer pressure control programmable in tons or kips. • Programmable Jaw Pressure control • Programmable bulldozer pressure control • RTD temperature sensor for hydraulic oil • Overtemp warning and shutdown parameter.





Operator Console Controls:

• Carriage Jog Joystick controls • Tension Cylinder Joystick controls • Carriage Rotation Joystick controls • Die Table Joystick controls • Die Table Rotation Joystick Controls • Swing Selector switch controls • Oscillation Selector switch controls • Rotation Selector switch controls • Bulldozer Joystick Controls • Load Operation Pushbutton • Snug Operation Pushbutton • Pre Operation Pushbutton • Stretch Operation Pushbutton • Post Operation Pushbutton • Relax Operation Pushbutton • Unload Operation Pushbutton • Cycle Start Pushbutton • Cycle Pause Pushbutton • Cycle Cancel Pushbutton • Jaw Clamp/Unclamp Selector Switches • Machine On Pushbutton • Machine Off Pushbutton • Control On Pushbutton • Control Off Pushbutton • Alarm Reset Pushbutton • Feedrate Override Pot • Emergency Stop Pushbutton • Auto/Manual/MDI/Teach mode selector switch

CNC Control Screens:

• Main Position Status Screen • Part Program Editing Screen • Force Yield Screen • Machine Alarm Screen • Machine Control Parameters Screen • System Setup Screen • Diagnostic Maintenance Screens (Node I/O)





Example CNC Screens: Main Status Screen

Program Edit Screen





Setup Screen

Alarm Screen





Diagnostic Screen

Yield Chart Screen





Parameter Screens


Microtrol Engineering Inc

Documents

Transcript of Microtrol Engineering Inc