MICROCEMENT & COATINGS...MicroCement is an exterior lining that can be applied to any hard surface,...
Transcript of MICROCEMENT & COATINGS...MicroCement is an exterior lining that can be applied to any hard surface,...
MICROCEMENT & COATINGS
M icroCement and other de cor ative ceme nt coatings offer tas tef ull alte rnatives to traditional concrete
www.livingconcrete.co.uk
Advantages of using MicroCement and MicroConcrete over traditional materials:
• Replaces traditional wood and concrete floors with a thicker surface and better finish• Quick and easy to apply, clean and maintain• No heavy construction work• No joints or gaskets required• Sunlight & UV resistant• Allows for custom logos and designs• Durable in areas of high traffic
MICRO-CEMENT &COATINGSMicroCement is an exterior lining that can be applied to any hard surface, both indoors and out – furniture, walls, floors. This cement and quartz based product is 1 and 2mm thick. The smooth finish makes it ideal for a modern, minimalist design that can be easily combined with materials like wood and ceramic.
One of the great advantages of MicroCement is that it can be applied over existing linings. It’s a modern, tasteful alternative that entirely cuts out the dirt and disruption of traditional construction. With just a damp cloth and wax you can achieve a single continuous surface.
Using MicroCement means rapid application and easy maintenance.
MICROCEMENT SYSTEM COMPOSITION
THICKNESS– Between 1 and 2 mm
SUBBASE – It should be secure and free of moisture– There can be no rising or negative humidity– There should be no cracks
MIX RATIO – 2.8 to 3.2 parts powder for 1 part liquid (by volume)
STORAGE– Store in a dry, cool place in original closed container
SHELF LIFE– 6 months in closed container
APPLICATIONS
- On existing tiles and old smooth concrete screeds (without the need to break)- Existing floors where carpet has been removed- Plastered walls and ceilings- Internal/external walls and floors- Bathrooms and kitchens- Countertops- Bathtubs- Furniture- Stairwells and steps
– Micro Concrete Powder– Liquid Concentrate or water– Water based Sealer– Acrylic Wax or RESIFAN PU K12
MICROCONCRETE SYSTEM COMPOSITION
– Micro Concrete Powder– Liquid Concentrate or water– Water based Sealer– Acrylic Wax or RESIFAN PU K12
THICKNESS– Between 2 and 3 mm
SUBBASE – It should be secure and free of moisture– There can be no rising or negative humidity– There should be no cracks– Can be mortar, ceramic, porcelain, mosaic, concrete and marble
MIX RATIO – 3 to 3.5 MicroConcrete Powder to 1 Liquid Concentrate
STORAGE– Store in a dry, cool place in original closed container
SHELF LIFE– 6 months in closed container
APPLICATIONS
- Applicable on ceramic, porcelain, marble, mosaics and tiles (withoutthe need to break)
- It has a similar look to that of polished concrete, but with little thickness- Suitable for places with high traffic- Bathrooms, kitchens, and all rooms in the house- Allows for on - sight concrete renovation
MICROCONCRETE
MicroConcrete has a slightly thicker surface than MicroCement at 2-3mm, and is ideal for tougher environments such as shops and exteriors.
Like MicroCement, you can apply MicroConcrete to interior and exterior surfaces, with no need for joins or breaks. It can be applied over existing materials and reduces the time needed for application and maintenance.
MicroConcrete has a smoother finish and is more slip-resistant than MicroCement but offers an equally clean and simple way of renovating your home or workspace.
FLUIDCONCRETE
FluidConcrete is a self-levelling indoor cement floor coating, 2-3mm thick and can be installed on top of all types of hard surfaces.
FluidConcrete is ideal for high-traffic environments such as shops, schools and restaurants. It’s a modern, tasteful alternative that entirely cuts out the dirt and disruption of traditional construction.
This product has a smooth, Polished-Concrete-like finish, that makes it perfect for a modern, minimalist design that can be easily combined with materials like wood and ceramic.
You can apply FluidConcrete to interior surfaces, with no need for joins or breaks. It can be applied over existing materials which reduces the time needed for application and maintenance.
FLUIDCONCRETE SYSTEM COMPOSITION
– FluidConcrete Powder– Water based Sealer– Polifan K12 Sealer
THICKNESS– Between 2 and 3 mm
SUBBASE – It should be secure and free of moisture– There can be no rising or negative humidity– There should be no cracks– Can be mortar, ceramic, porcelain, mosaic, concrete and marble– For cement bases install first a primer using concentrated liquid, Solvent base acrylic sealer or Resifan E primer
MIX RATIO – 4 parts of FluidConcrete Powder x 1 part of Water
STORAGE– Store in a dry, cool place in original closed container
SHELF LIFE– 6 months in closed container
APPLICATIONS
- For indoor and outdoor floors- Applicable on ceramic, porcelain, marble, mosaics and tiles (without the needto break)- It has a similar look to that of polished concrete, but with less thickness- Suitable for places with high traffic- Bathrooms, kitchens, and all rooms in the house- Allows for on-sight concrete renovation
AQUACRETE SYSTEM COMPOSITION
– Bi-Component: AquaCrete Powder and Liquid AquaCrete
THICKNESS– Between 2 and 3 mm
SUBBASE – It should be secure and free of moisture– There can be no rising or negative humidity– There should be no cracks– It can be mortar, tiles or mini tiles
MIX RATIO – 3 – 3.5 AquaCrete Powder to 1 Liquid AquaCrete
STORAGE– Store in a dry, cool place in original closed container
MIXING KIT INCLUDES– Powder AquaCrete 5 gallons– Liquid AquaCrete 5 gallons
SHELF LIFE– 6 months in closed container
APPLICATIONS
- Can be applied on existing cement surfaces, tiles and mini tiles- Can be applied on swimming pools, basins or fountains that use freshwater ONLY- Public or private spaces/areas- Images, inlays and demarcate lines can be drawn using differentmaterials and colours- Can be polished in order to restore the surface
AQUACRETE
AquaCrete is a cement and quartz based lining with colour, developed specifically for use in swimming pools, fountains, bodies of water and basins. It is 2 to 3 mm thick and the finish is similar to MicroConcrete.
It can be combined with MicroCement and MicroConcrete to achieve continuous surfaces and can be used on new or existing swimming pools allowing for quick renovation.
NEOCONCRETE SYSTEM COMPOSITION
– Quartz + Resifan + MicroConcrete Powder + Liquid Concentrate + Sealer + Wax
THICKNESS– Between 3 and 5 mm
SUBBASE – It should be secure and free of moisture– There can be no rising or negative humidity– There should be no cracks– It can be ceramic, porcelain or concrete- Do not apply over Resifan System + mesh
MIX RATIO – PieDrex System: 12 quartz to 1 Resifan E (by volume)- MicroConcrete: 3 powder, 1 Liquid
COMPONENTS- Resifan EP Kit x 29 kg- Stones x 25-50 kg- Powder MB x 5 gallons- Liquid Concentrate x 5 gallons- Water Sealer x 5 litres- Acrylic Wax x 5 litres
STORAGE– Store in a dry, cool place in original closed container SHELF LIFE– 6 months in closed container
APPLICATIONS
- For floors and counter-tops; both indoor and outdoor- Recommended for commercial buildings, hotels, shopping malls, banks, light industries, airports, bus terminals, government or public administration buildings, etc.- Applicable on smoothed concrete, cement and ceramic coverings.
NEOCONCRETE
NeoConcrete coating is recommended for use in shopping centres, light industries and hotels among other high traffic places.
Mosaic or granitic with cement, quartz and resin-based colour, 4 mm thick, and made on site. Its most common uses are on highly resistant decorative flooring and polished finishes.
It is a combined system of PieDrex (Stone clad Facing + MicroCement (Sheet Asphalt.
OXICRETE SYSTEM COMPOSITION
- BICOMPONENT Liquid
SUBBASE - Cement areas, mortars or fully cured concrete- In fine mortars it can be applied wet
MIX RATIO – 3: 1 (3 comp A: 1 Comp B)– 3: 1: 1 (3 comp A: 1comp B: 1 muriatic acid) in the case one dilutes withmuriatic acid
COMPONENTS- Kit for 1.33 and 6.67 Litre
STORAGE– In closed original container and away from direct light
SHELF LIFE– 12 months in closed container
APPLICATIONS
- Applied on cement surfaces it gives a rusty iron or stone appearance- It is for commercial and residential use, both indoor and outdoor- It can be applied to floors and vertical surfaces (we recommend the application on vertical surfaces due to the wear the product can suffer on floors)- It is ideal for renovating rooms and old concrete surfaces- It gives a very original appearance
OXICRETE
Oxicrete is an acid system used to patinate and oxidize cement surfaces, mortars or concrete dams.
Applied on cement surfaces it gives it a rusty iron or stone look, and is ideal for transforming old concrete surfaces. It is a very good alternative to Corten steel, with the advantage of being less expensive.
It can be applied to MicroCement, MicroConcrete, ThinCrete and Smoothed Concrete.
Get a vintage look and give your rooms an original touch!
RESIFAN SYSTEM COMPOSITION
Tri-component: Resin Comp A + Comp B + load
THICKNESS– Between 1 and 3 mm
SUBBASE- It should be secure and free of moisture- There can be no rising or negative humidity- There should not be any cracks- Can be mortar, concrete, and finely levelled mosaic- In the case of ceramics or the like, it must be previously levelled with Grueso(EDFAN Levelling paste)
MIX RATIO – Resifan PLN AU: 1000 cc Resifan PLN AU + 20 cc Cat + 900 cc load
COMPONENTS- Resifan PLN AU | 20kg bucket- Resifan CAT | kg.- Resifan Load | 40kg bag
STORAGE– Store in a dry, cool place in original closed container
SHELF LIFE– 2 months in closed container
APPLICATIONS- The polyurethane floors are ideal for the food industry (Due to the coating’sresistance to chemical products)- Great for making highly resistant, colour stable decorative flooring- Resifan Epoxy and polyurethane paints are perfect for both walls and floorsof garage areas or parking lots and can be applied to any flat and horizontalsurfaces- Ideal for anti-bacterial and hygienic floors in laboratories, clinics, or doctor’soffices- It can be applied on work tables as it is scratch-resistant
RESIFAN
Resifan coating is a self-levelling continuous coloured resin which is 2-3 mm thick. It is ideal for environments where continuity, a smooth finish and low maintenance are essential.
It’s method of application means continuous floors can be achieved in large dimensions and are highly resistant to wear. Resifan can be applied in homes as well as industrial spaces and shops and can be applied over existing finishes.
Unlike other coatings, such as MicroCement or MicroConcrete, Resifan does not streak and therefore it’s an ideal product for those who want a full or solid colour finish, achieving a sophisticated, minimalist effect. You can work with strong or soft colours and its appearance is similar to that of a polished vinyl floor.
Resifan does not require gaskets and can be applied on all types of hard surfaces – even existing ones – meaning less disruption on site.
REVOCOLOUR SYSTEM COMPOSITION
One component: RevoColour Powder
THICKNESS– Between 4 and 5 mm
AVAILABLE FINISHES- Paris Stone- Morelia
SUBBASE - It should be secure and free of moisture- There can be no rising or negative humidity- It must not crack
MIX RATIO – 4 Parts RVK Powder x 1 Part Water
COMPONENTS- Bags x 27.20 kg(Bag efficiency: 7-9 m2 depending on the conditions of the foundations.)
STORAGE– Store in a dry, cool place in original closed container
SHELF LIFE– 6 months in closed container
APPLICATIONS
- Applicable on existing walls- Can be used indoors or outdoors- Suitable for use in shops, homes, hotels, stores, and many other sites- Ideal for an Italian “Tuscan style” look
REVOCOLOUR
RevoColuor is a fine textured cementitious based plaster, with colour, 5mm thick.
The coating has a similar finish to either Paris Stone (fine texture) or Morelia (coarse texture).
It is for indoor and outdoor use exclusively on walls.In just one step you can replace fine plaster with patching plaster and paint, saving both time and costs because no additional colour is required.
COLOUR RANGEAquaCrete, FluidConcrete, MicroCement, MicroConcrete, NeoConrete, Resifan, Revocolour
Oxicrete Colour Range Revocolour Finishes
Paris Stone Morelia Aqua Terracotta Ebony Brown Amber
White Misty White Ivory Coconut Pollen Topaz Ocher Sahara Sand Caribbean Sand Versatile Grey Wood Chocolate
Texan Hazelnut Mayan Red Terracotta Plum Victorian Pink Amethyst Natural Pink Navy Grey Loyal Blue Sky Willow Jade
Alpine Green Autumn Green Silver Cement Grey Steel Grey Led Grey Silver Tempest Grey
Living Concrete LtdYorks Yard, 12A Sutton Lane North, Chiswick, London W4 4LD+44 (0)20 3092 [email protected]
www.livingconcrete.co.uk
Disclaimer
Living Concrete reserves its right to make any and whatever changes necessary to the products and the present catalogue, with no notice and at any time. It declines furthermore any responsibility for any errors contained therein, and for any printing or editing errors.
Technical data and colours are purely for reference purposes.
There may be discolorations, color variances, cracks and dimensional differences which result from the nature of concrete.
The size and distribution of pits on items surfaces is unique and random. Discoloration resulting from air humidity changes is a natural feature of the concrete items.