Micro Hydro by Irrigation Water
-
Upload
mryusufsyaroni6332 -
Category
Documents
-
view
234 -
download
2
Transcript of Micro Hydro by Irrigation Water
8/2/2019 Micro Hydro by Irrigation Water
http://slidepdf.com/reader/full/micro-hydro-by-irrigation-water 1/20
The water is flowing regularly in the cannel starting from the
main gate of the Dam. Along the cannel there are some places
formed like a mini water fall making sound that can be hear
from a distance. It is nothing strange to the villagers from thenear by villages since the dam was constructed and operating
everyday's in 24 hrs non stop.
1. Originality
The Original Design
The design of mini hydro power plant by using irrigation water was
created to coincide with the constructed drop structures and the locally
available materials. After studying the design of drops structure and site
investigating the location for installation of hydro power plant is selectedwith the basic criteria such as working head (drop height) vicinities of
villages, number of households and possibilities of power transmission
line. The plant is installed at the drop structure which has enough water
head and flowing water rate to generate hydro power.
It is one of the state of the art to the environmental engineer
to produce electricity utilizing irrigation water without losing
the main objective of the irrigation system.
In general, Dams are constructed for the main purpose of
Hydro Power Production and/or for water supplying to the
agriculture farm for multiple crop cultivation.
Based on the water flow rate and the drop (water head different) along the cannel, in additionwith the help of suitable generator available in the market or easy to do are the real origin of
this project started to be implemented.
A water control gate and channel or casing are to be constructed to each unit. The flowing water
from the cannel is the main source of energy to convert electricity with the help of hydro turbine
which is connected to the generator. The generated power could be calculated as following;
QH P
P = Generated Power
= Overall efficiency of the turbine
= Specific weight of water (KN/m³)
Q= Flow rate of water (m³/s)
H=Head of water (m)
1.1 Design
where
The Origin of Project Design
Page.1
Ma Mya Dam was constructed mainly to supply irrigation water for multiple crop cultivation.
The drop structure along the cannel of Ma Mya Dam
Ma
Mya
Dam
8/2/2019 Micro Hydro by Irrigation Water
http://slidepdf.com/reader/full/micro-hydro-by-irrigation-water 2/20Page.2
1.2 Application.
Once the mini hydro power plant is installed in the cannel the power generating is
available as 24 hrs 365 days a year as irrigation water is flowing continuously. With this
continuous output electricity, not only lighting and recreation in the night time but also
many productivities such as bettery charging & other cottage industries can be done in the
day time. Electricity is one of the most essential needs of the rural development. It could
be installed and operate independently due to the demand of the user. Furthermore, with
this power source available, the small factory could be relocated for their new place as
lowest production cost.
Mini hydro Power Plant
Electrification
Day time usage
Night time usage
24 hrs
usage
1.3 Approach.
This project is approached and instructed by the state leaders and the minister of the ministry
of agriculture and irrigation when they made a site visit to the Ma Mya Dam to find the mini
hydro power production with the assistant of the local technology and material available in
the market and to implement the project as quick as possible.
The electrification with the mini hydro power plant in the cannel of Ma Mya Dam is the first
of its kind producing electricity utilized the constructed irrigation facilities irrigation water
in Myanmar. It is completely designed and fabricated by irrigation circle no.9 of IrrigationDepartment in Ministry of Agriculture and Irrigation.
By this successful implementing of mini hydropower plant at Mamya Dam Project, nearby
villages also located near the cannel with efficient drops approached to the Irrigation
Department and requesting to implement the same project for them. They all get the
electricity at present and have chances of creating opportunities for cottage industry
development.
Two mini hydropower plant in nearby dams of Kantin Bilin Dam Project and one in Thonze
Dam project were also implemented for the villages recently. (see table 1)There will be more mini hydropower plants planned to be installed in all irrigation projects
in the whole country.
By installing mini hydropower plant, the people who live in far from the grid will get the
chance to improve higher living standard and can develop the healthy environment.
The required flow rate to operate turbine is as small as 0.1~0.5 m3/sec only and propeller
type turbine was selected for low head plant with the working head 1.0~2.0 meter. It is
small, light weight and can be installed virtually any where and the main parts of turbine
could be designed and easily fabricated in local workshop.
Battery Charging
8/2/2019 Micro Hydro by Irrigation Water
http://slidepdf.com/reader/full/micro-hydro-by-irrigation-water 3/20
2.1Amount of Emissions Avoided(CO2, etc. in tons/yr)
2.Environmental And Social Consideration
2.2Community / People Participation.
The people in this area has lived without electricity and has
very little knowledge about electricity. Everyone had concerned
about this project since it was laid down the decision of
implementation of this project as they fully understood it could
really benefit to the their daily life style and the way of living.
As the first and pilot project for rural village electrification, the investment cost for major parts
is borne by the Irrigation Department and the local community participated in connection of
power line, volunteer the laboring for carpentry work and earth work excavation. The villagershave to take responsibility to run the plant by themselves after completion of start up and test
running. Some villagers have been trained for operation and maintenance of the plant
successfully. The local government authorities (Township, District and State level) also
provided the necessary moral support and guidance as this project is useful for the community.
2.3 Benefits
2.3.1 Benefit to User.
No expense is needed for any kinds of fuel to get the same amount of electricity. It is like a
changing of stone age to the beginning of the present electricity world to this community. With
it’s new utility access, it is also easy to expect the regular income by creating small business
such as from battery charging and other cottage industry.
This project was donated and handed over to Myinwartaung village. The benefit for the user is
not only by the economic point of view but also for the social livelihood development.
Project Investment Cost(see Chpt.3.4) = 2,450,000 ks
Income from lighting and battery charging (see Chpt.3.5) = 228,000 ks/month
Operation and maintenance cost = 125,000 ks/month
Pay back value of the month = 103,000 ks/monthPay back value of the year = 1,236,000 ks
If it is set up by economically, the project investment cost would be paid back within 2 years.
From that point the villagers can get the electricity almost free of charge with small amount of
operation and maintenance cost equivalent to as low as 35.9 Ks/KWh (US$ 0.03/KWh).
Total installed capacity = 48 KW,
The operating hours per day = 24 hr
Total operating hour for year (24 hr x 353day) = 8,472 hr/yr
(with 12days for maintenance)
Total output = 48 KW x 8472 hr/yr/1000 = 406.656 MWhr/yr
The Amount of Emission Avoided (CO2) = 406.656 MWhr/yr x 0.8tCO2 /MWhr
= 325.32 t CO2 /yr
Page.3
The people lived in Myinwartaung and nearby villages used candles and diesel oil lamp for lighting
before the hydropower plant was operated and distributed the electricity. Some people used battery
lamps recharged by engine driven chargers. All these lighting systems are harmful for health and
affected to environment impact because of heavy Carbon emission. By introducing the hydropower
plant, it could reduce the CO2 emission and could be diverted to the healthy environment.
8/2/2019 Micro Hydro by Irrigation Water
http://slidepdf.com/reader/full/micro-hydro-by-irrigation-water 4/20
8/2/2019 Micro Hydro by Irrigation Water
http://slidepdf.com/reader/full/micro-hydro-by-irrigation-water 5/20
3.Technical, Economical And Market Consideration3.1 Installed Capacity.
With the drop structure height different ( effective
head ) the size of generator are selected as 2 kw, 3
kw and 5 kw at the suitable location respectively.Two units of power plant are mostly installed
at the drop structure. Water flow rate in irrigation
cannel is 4.25 m3/s and quite sufficient for
hydropower generating as the flow rate requirement
for mini hydro powered generator is only 0.42 m3/s.
3.2 Technical Design.
In the irrigation system such as drop structure, flume, super passage, cross drainage culvert etc
are usually constructed for the delivery of irrigation water effectively. Producing electricity by
installing hydro turbine at the drop in the cannel without disturbing normal irrigation system is
one of the smart idea and good innovation of renewable energy.
The installed output per unit 2~5KW
Total installed no. 16
Total Installed capacity 48 KW (pls see detail in table 1)
Table 1. The List of Implemented Mini Hydro Power Plant
It is one of the most important design factor to
be considered carefully for the capability of
power production without effecting from the
minimum to full water supply and water level in
the irrigation cannel.
Therefore the turbine generator units are
designed to operate by controlling full supply
water level in the irrigation canal as well.To be able to do so own water channel and
control gate for the mini hydro turbine unit is
necessary to be installed at the drop structure
where the plant is designed to be located.
Drop No(5) 5 KW-2nos.
Regular Canal
Page.5
No LocationDrop Height
(ft)Name of Village
No. of
Household
Installed
Capacity
(KW)
Remarks
1 Drop (1) 4 Near Dam Site 50 5
2 Drop (3) 5 Myinwartaung 4
3 Drop (4) 4 Myinwartaung 5
4 Drop (5) 6 Myinwartaung 10
5 Drop (13) 3.5 Ngabatkya 100 6
6 Check Gate 5 Bogyigone 100 6 Thoneze Dam
7 Drop (7) 5 Magyikwin 120 6
8 Check Gate 4 Gayansanpya 80 6
Total 48
From Ma Mya Dam
Kantin Dam
350
8/2/2019 Micro Hydro by Irrigation Water
http://slidepdf.com/reader/full/micro-hydro-by-irrigation-water 6/20
8/2/2019 Micro Hydro by Irrigation Water
http://slidepdf.com/reader/full/micro-hydro-by-irrigation-water 7/20
3.3 Technical Performance.
The water level difference in height of drop structure
results the difference in potential energy available. Power
outlet of mini hydropower plant are design by measuring
the height of drop structure which is 4 ft height for 3-KW
and 6 ft height for 5-KW generator.
The technology for design and construction of mini hydro power plant by using irrigationwater is similar to hydropower plant technology. Irrigation supplied water from canal is
converted into mechanical energy by hydro turbine to drive rotor of the electrical generator.
Main canal section between two drop structure is served as basin by closing the outlet of the
drop structure with stop log during the irrigation period doesn’t met the design discharge.
Hydro turbine generator plant are installed at each side of the drop structure by creating the
inlet water channel and control gate on both sides of the drop structure site.
Item Description Cost (Ks) Cost US$
1 Turbine Casing Assembly 450,000 375
2 Turbine Generator Assembly (5KW) 600,000 500
3 Electric ity main switch board and access; 100,000 83
4 Water Control Gate Assembly 200,000 167
5 Inlet Water Channel Structure 250,000 208
6 Power Plant Building 400,000 333
7 Power Transmission Line 250,000 208
8 Labour Cost 200,000 167
Total 2,450,000 2,042
3.4 Investment Cost. (The Rate of Investment )
To match with available water head, the generator of sizes 2 kw, 3kw or 5kw are chosen.
The casing and draft tube is installed in the middle portion of drop structure. It is generating
electricity by slowly releasing water from the gate till it reached the running RPM of the
generator to produce the out put voltage at 220. After that, the hydropower plant was
operated successfully and could be manage the output power according to the designated
install capacity.
Table 2 The project cost of mini hydropower plant
The drop structure
Unit in Action
5 KW TURBINE GENERATOR DESIGNAdjusting Water Gate
Page.7
The Rate of Investment = US$ 408 / KW
This project is being
constructed based on the
donation of construction circle
(9) for the material and
technical support. The local
people voluntarily participated
in all construction works.
However total project cost is
estimated as shown in table 2 if
it is constructed economically
without the benefit of the
mentioned above.
8/2/2019 Micro Hydro by Irrigation Water
http://slidepdf.com/reader/full/micro-hydro-by-irrigation-water 8/20
3.5 Financial Scheme/Livelihood Projects. (The payback period)
Even though the said mini hydropower project was mainly contributed by Irrigation
Department, it should be maintained as a livelihood project by local people. In order to sustain
this project, Village Electrification Committee was formed with 5 members and 3 staffs were
appointed for operation and maintenance of the hydropower plant. By supplying the electricity
to the community, the financial status of the committee will become as follows.
3.6 Funder (Government and non-government)
This project was totally contributed by donation of Irrigation Department ( Government
Organization) for turbine, generator with main accessories and construction of civil works
including design and supervision. The villagers voluntarily participated for earth work
excavation and power line installation.
Incomes (For Install Capacity = 5 KW)Batteries charging = 60 nos x 60 ks/day x 30 days= 108,000 ks/month
Home Lighting = 100 nos x 40 ks/day x 30 days= 120,000 ks/month
Expenditure
Salary for 1Manager operator +2operator ( 3 nos x 30000 ks) = 90,000 ks/month
For Maintenance & Repairing = 20,000 ks/month
For Office Management Expense = 15,000 ks/month
Saving for reinvestment will be 103,000 ks/month.
Therefore pay back period would be within (2) years.
3.7 Market Size (Potential within 5 years)
Table 3 Mini hydropower plant in Ma Mya
Dam (under construction)
Ready To Go
Page.8
No Location
Drop
Height
(ft)
Name of villageNo. of
Household
Installed
capacity
(KW)
Remarks
1 Drop (8) 3 Wingaba 130 6 Ma Mya Dam
2 Drop (10) 4.5 NyaungKhon 185 103 Drop (24) 4 Htoogyilay 40 5
4 Drop (25) 4 Khinetawkwing 80 6
5 Drop (26) 4 Alesu 50 6
Total 33
(B) According to the water requirement for the agriculture farm, it is releasing water from the
dam all the year round and the minimum flow rate is 2.21m³/s. For installed capacity 5 kw
power plant, the required flow rate is only 0.42 m³/s. Even though 2 hydropower plants were
set up at a drop structure the necessary flow rate would only be 0.84 m³/s and that is still lower
than the minimum flow rate of irrigation water. With this calculation, more power plant (5
units) could be installed at each drop. Therefore the available power out put would be 1.5 times
more (25KW)for each drop. This power out put will be reached within years due to the powerdemand from the village for their new production or increasing electric appliances.
Future Planning for mini hydro power project
No. Project location Remarks
3KW 5KW
1 Chin State 1
2 Magway Division 3
3 Mandalay Division 4 17
4 Construction Circle (1) 3
5 Construction Circle (3) 2 6
6 Construction Circle (5) 5
7 Construction Circle (9) 8 2
8 Kyunsu Township 10
Total 20 41 265KW
Installed Units
Table 4 The Future Pan of mini hydropower plant
(A)This technology of mini hydropower by using irrigation
water is simple and easy to adept. It needs only one time
investment and will revenue daily for years. Furthermore, thepay back period is very short as mentioned above. (see chpt.3.5)
8/2/2019 Micro Hydro by Irrigation Water
http://slidepdf.com/reader/full/micro-hydro-by-irrigation-water 9/20
3.8 Local Manufacturing/Content of System
Turbine and generator are the key elements for hydropower plant. The main parts of
turbine such as water way casing, runner blade, draft tube and guide vane are easily
fabricated in local work shop.
3.9 Amount of Energy Avoid
By accomplishing of mini hydropower plant(Total48KW) at Mamya Dam
project,756.864GJ/yr of energy is avoided and it could be saved 280,320 liters of diesel oil for
every year if the same amount of electricity is to be produced with Diesel engine powered
generator.
Ready for mass production
Local production
Site Installation
Page.9
(C) At present, a large number of irrigation projects (217dams) have been completed and
every dam has the potential for installation of mini hydropower and some of them are
already planned to implement.(see table 4)
Base on these points of ABC the potential and the market size could be estimated easily. The
total output will be 5.2 MW if all dams (217) have installed this system as 11 dams could
install 265 KW. This kind of power production will be booming to the whole country within
5 year for sure with potential of more than 30 times from now. ((5.2MW/265KW) x1.5)
Units KW Units KW Units KW Units KW
16 48 10 33 61 265 87 346
Installed(2008) Under construction Future Plan(2009~2010) TotalMarket
Analysis
All the parts in generator could be fabricated by the
local manufacturers except the armature. The other
necessary electrical appliances and lighting fixtures
are also available in local market.
8/2/2019 Micro Hydro by Irrigation Water
http://slidepdf.com/reader/full/micro-hydro-by-irrigation-water 10/20
4. Operation And Maintenance Scheme4.1 Operation Hours (day/month/year)
This mini hydropower plant can operate around the clock for the whole year except stop for
maintenance service one day for a month. The operation hour of the hydropower plant
could be obtained as following.
4.2 Maintenance scheme (In house, contracted out service, Government, others)
This type of this mini hydropower plant is almost maintenance free and the operator can
easily do general services by themselves. The only important things to realized is that the
operator has to pay attention on the sound of turbine and generator carefully always. The
operator should follow the points as mentioned below
1. Check the water level from supply canal.
2. Check the function of gate operation.
3. Remove the debris and bushes in front of trash rack of inlet gate.
4. Check the cable line.
5. Listen to the sound of turbine and generator.
It is designated to do the maintenance service once a month. At that time, over haul
repairing of turbine of generator (if necessary), checking gate assembly, turbine casing, drafttube, painting work, cable line strengthening and etc should all be conducted.
Daily operation hours for battery charging (Day time) = 12 hours
Daily operation hours for lighting (Night time) = 12 hours
Monthly operation hours (Assume 1 day off for maintenance) = 696 hours
Yearly operation hours (365-12=353days/year) = 8,352 hours
The organized committee can manage the major maintenance services as described above by
themselves and no contracted out-service is needed. However volunteer technical service is
always provided by the request of villager management team from government or NGO.
In house Management Team. 1 Manager Operator, 2 Operators-Technician
Volunteered Out Service. One Engineer. (CC9-ID)One Technician. (CC9-ID)
Government & NGO. One Area Engineer (District Engineer from ID)
Page.10
8/2/2019 Micro Hydro by Irrigation Water
http://slidepdf.com/reader/full/micro-hydro-by-irrigation-water 11/20
Regular maintenance measures.
As regular maintenance scheme, one day in a month
the check list is provided as following.
•To check the bearing
•
To check the turbine blade and assembly•To check the generator
•To check the water inlet and guide channel
•To check all electric power switches and
transmission line
4.3 Other maintenance measures (Training, after sales service )
The installation and operation of mini hydropower plant by using irrigation water is easilymanage by the local people after short training. On the other hand, the villagers participated
together with the irrigation staff personnel from the beginning of project till to the completion.
By doing so, they can grab some knowledge and experience on the plant and could be referred
for the operation and maintenance of the scheme. According to these advantages, the villagers
(Organized Committee) could operate and manage by themselves since the plant was handed
over to them. More over, they can contact and ask for help from the staff personnel at any time
they required.
4.4Local Service Content
According to the feature of mini hydropower plant, there is less maintenance and repair job.
The operator has enough knowledge and intelligence to take care of the scheme except the
major problems in turbine and generator. If they get any disturbances in turbine and
generator, they can call for the service or workshop standing nearby them as a local service
and could run the project continuously.
Page.11
The working function and the operation are easy to catch up by every villagers as it is so
simple. It could be easily to be noticed by every one passing-by for malfunction of the
system, so that they could inform to the most concerned personnel for maintenance and
repair. In this way villagers can participate in the regular maintenance of the system.
8/2/2019 Micro Hydro by Irrigation Water
http://slidepdf.com/reader/full/micro-hydro-by-irrigation-water 12/20
5.1 Replicability of project (Relevance, Impact, Efficiency)
This project can be easily replicated in any irrigation cannel for electrification to the nearby
area where the community’s commitment to having electricity with self help initiatives.
5. Replicability
Among the type of renewable energy,
hydropower energy is the most
suitable and sustainable to develop
electricity with less emission. The
hydropower energy by using irrigation
water is completely renewable energy
resource and there is no impact to the
environment. Further more, there is no
ill effects on irrigation supply for cropcultivation as primary aim for
sustainable development of agriculture
sector.
As the propeller turbine is small, light weight
and can be easily installed, the said mini
hydropower plant is the most suitable for local
people who lived in off grid area and could be
performed with the high effectiveness to
generate electricity. The construction work of
the mini hydropower plant is also simple and
easy to adaptation by others.
As Myanmar is agricultural based country, the agriculture sector plays vital role for economic
development. In order to promote the agriculture sector development, Irrigation Department
emphasized to perform the irrigation projects including dams, sluice gates, flood protection
embankment and river water pumping etc. At present ( 217 ) irrigation projects have beingconstructed around the whole country and by using the irrigation facilities ( drop structure ),
the mini hydropower plant can be installed. In fact, the irrigation water will supply all the
season for crop cultivation and so that, this hydropower can generate around the clock for the
whole season. By introducing hydropower generating at constructed irrigation projects, it
would become as multifunctional purpose usage of irrigation water without disturbance in
irrigation supply. As replication of this project more similar hydropower plants after
introducing hydropower plant by using irrigation water in Ma Mya Dam are going to install in
other dam projects wide spread throughout the country as mentioned. (See Table 4)
3 KW – 2 nos (Power House in Night Scene )
3 KW – 2nos(Power House in Day Time)
Page.12
It would be more attractive to the small
industries as the electric power can get 24 hrs
almost free of charge.
8/2/2019 Micro Hydro by Irrigation Water
http://slidepdf.com/reader/full/micro-hydro-by-irrigation-water 13/20
5.2 Cost Effectiveness (No, Low, High cost)
The total project cost of setting up is very effort able range to the local people. The cost of
raw material for the parts of the turbine is relatively low at present. The mini hydropower
plant constructed in Ma Mya Dam Project consists two major parts as civil work and turbine
generator installation. This two major work is involving for cost effectiveness. Concerning
for the civil work, the main facility was already constructed and it needs to renovate a fewportion of structure such as setting up gate frame and providing of approach channel. The
expenditure for those works are inexpensive (low cost).The design and construction technique of the mini
hydropower plants is not complicated and so simple
compare with other type of hydropower plant.
Moreover, this type of hydropower plant is regarded
almost maintenance free and less repair. It needs
only one time investment and will resume revenue
daily for years. Therefore it is very suitable to the
busy villagers who can not pay much attention to thesystem.
5.3 Sustainability of project.
The mini hydro power plant designed and produced by construction circle (9) of Irrigation
Department has the following characteristics. The following points are the reason for identifyingthese mini hydropower plants as a sustainable project for years.
1. The Hydropower energy is free, clean and untapped sustainable renewable energy.
2. The hydropower technology is simple, reliable and is easy to adaptation.
3. The fabrication and installation is simple and locally manufactured.
4. This plant is almost maintenance and repair free.
5. The payback period is comparatively short as low investment and operation cost.
6. It can compile of mini hydropower to mega hydropower.
7. This mini hydropower plant is created the secondary benefit of irrigation project as
multifunctional purpose of project.
With these characteristics especially low investment and shorten payback period, it is the
national interest to install the similar project throughout the country.
This project would not only be benefitted for the local people but also for the government in
order to promote the living standard of the people by providing of the required electricity which
could increase the work force for the country.
The mini hydropower plant started from Ma Mya Dam is reliable, replicable and
sustainable for years.
“For my community”
Page.13
This is very low cost project.
US$408/KW (see chpt.3.4)
5.4 Others (Life of project)
Operation Starting Date. 7th June, 2007.
8/2/2019 Micro Hydro by Irrigation Water
http://slidepdf.com/reader/full/micro-hydro-by-irrigation-water 14/20
The renewable energy is the term which is very simple and most popular terms in this early
21st century after the fossil fuel crisis, the treat of global warming and climate change by the
effect of carbon emission. The hydro generated power is one of the best sources among the
renewable energy and widely installed wherever possible in the world. Myanmar is doing it’s
best to comply with ASEAN expectation to utilize 10% of its energy requirement from New
and Renewable Energy sources by 2015.
Even though the install capacity of mini hydropower plant is rather small (Max: 5 KW), it’s
development plays a significant role in enhancing local prosperity, poverty alleviation and
promoting the living standard of the people in rural area not covered by the national grid. It is
also expected to boom the cottage industries along the cannel by increasing multi unit
installation at each drops as the electricity can get almost free of charge or so cheap. With this
easy to do technology, almost free operation & maintenance scheme and zero CO 2 emission
with low investment, the high replicability of this project surely will be easily spread to all
from the near by to the whole country elsewhere within a short period.
This project is fulfillment of the main objective of Renewable Energy Competition organized
by ACE to promote the creativity in Renewable Energy sector and to promote the CO2
emission reduction and to develop better environment in this region.
Hence, “The Rural Electrification With Mini Hydro Power Project (Ma Mya Dam)” is
the best for 2009 and forever.
Drop No - 1
Drop No - 3
Drop No - 4
Drop No - 13Thoneze Dam Drop
What a happy we are
“I love TV game so much”
“ We have 24 hr electricity you
see!”
Page.14
6. Figures, Tables, Photos
CONCLUSION
8/2/2019 Micro Hydro by Irrigation Water
http://slidepdf.com/reader/full/micro-hydro-by-irrigation-water 15/20
Project Location
Ma Mya Dam is located near a small village called
Myinwartaung in Hinthada Township Ayeyarwaddy Division.
The village is 120 miles North West of Yangon.
Project Site
Name of village Myinwartaung
Project Name Ma Mya Dam ProjectTownship Myanaung
District Hinthada
Division Ayeyarwaddy
Distance from National Grid 34 Kilometers
Population List
Name of Village Myinwartaung
House Hold 350
Family 370
Population 1200
Livelihood (1) Fishing.(2) Agriculture.
No. of school. 1
Page.15
Some salient data for mini hydropower plant installed
at drop structure No.5 is mentioned as below;
Distance from national grid = 34 Kilometers
Distance from Cannel =600 Meters
Generator Power Output = 5 KW – 2 units
Drop Height = 2.2 m
Total Investment Cost = US$ 2,042In House Management Team = 3 people
Daily Operation Hours = 24 Hr. continuously
Pay back period = 2 years
8/2/2019 Micro Hydro by Irrigation Water
http://slidepdf.com/reader/full/micro-hydro-by-irrigation-water 16/20
APPLICATION FORMASEAN Renewable Energy Project Competition
ASEAN Energy Awards 2009
COVERING NOTE,CERTIFICATION, AND ENDORSEMENT
The Consultant
U Htun Naing Aung
Consultant
Kaung Kyaw Say Engg. Co.,Ltd
No.31 Pinlone Yeikmon 5thStreet
Pinlone Yeikmon,Thingungyun Tsp,
Yangon MYANMAR
Tel: 95-1-571284Fax: 95-1-667940
e.Mail [email protected]
The Applicant
U Kyaw Myint Hlaing
Director
Construction Circle (9)
Irrigation Department
Yangon MYANMAR
Tel: 95-1-662608,
Fax; 95-1-664767e.Mail
The Owner
U Khin Zaw
Director General
Irrigation Department
Ministry of Agriculture and Irrigation
Office 15 Nay Pyi Daw, MYANMAR
Tel: 95-67-410008 ,
Fax. 95-67-410018e.Mail [email protected]
The owner, the manufacturer and the consultant hereby happily agreed to welcome the
ACE’s Board of Judges and the experts to visit the site verification of the authenticity of
the data presented.
We also hereby agree that ACE can publish the whole submission in ACE publications
and web site, without any prior consent of the owner of the RE project. If the submission
will be published in the other publications, the consent of the concerned RE project
owner would be required.
We, the undersigned certified that all the information provided here in this paper are true,
accurate and prepared by the consent of all parties concerned.
This project of rural electrification with micro hydro power system installed in Ma MyaDam is sponsored by Irrigation Department of Ministry of Agriculture and Irrigation,
Myanmar. It is manufactured and installed by Construction Circle 9 of Irrigation
Department operating and supplying the electricity to the nearby villages since 2008.
Focal Point.
U Soe Aung
Director GeneralEnergy Planning Dept. Ministry of Energy
Naypyidaw, MYANMAR
Tel: 95-67-411057 , Fax: 95-67-411113
e.mail. [email protected]
8/2/2019 Micro Hydro by Irrigation Water
http://slidepdf.com/reader/full/micro-hydro-by-irrigation-water 17/20
APPLICATION FORMASEAN Renewable Energy Project Competition
ASEAN Energy Awards 2009
Category : On-Grid
Off-Grid
Title of Activity / Project / Theme :
RURAL ELECTRIFICATION WITH MINI HYDRO POWER (Ma Mya Dam)PROJECT
Applicant General Information
Name of Company Irrigation Department, Ministry of Agriculture & Irrigation
Business Address Construction Circle (9) Irrigation Department
Number of
Employees200
Age of Project 2 Years
Nature of Business Dam & Irrigation System Construction
Contact Person
Name U Kyaw Myint Hlaing
Position Director of construction circle (9)
Telephone +95-1-662608
Mobile phone 095006615
Fax +95-1-664767
E-mail [email protected]
The construction of Dam is mainly purposed for either Hydro Power Plant and/or Irrigation
system. But Irrigation system is mainly constructed for water supplying to the agriculture
farms for multiple crop cultivation only.
However, taking advantage of the drop (water head different) structure along the irrigation
system to produce electricity is one of the state of the art to the environmental engineer who
is always considering to protect further global warming and climate change by reducing CO 2
emission.
In this paper it will see how easy to install these power plant without any disturbing to the
main objective of irrigation system of supplying water to the agriculture farms and how
much carbon emission is omitted to produce the same electricity by using IC engine withfossil fuel.
With this easy to do technology, almost free operation & maintenance scheme and zero CO 2
emission with low investment, the replicability of this project surely will be spread to all
from the near by to the whole country elsewhere.
Project Abstract
8/2/2019 Micro Hydro by Irrigation Water
http://slidepdf.com/reader/full/micro-hydro-by-irrigation-water 18/20
APPLICATION FORMASEAN Renewable Energy Project Competition
ASEAN Energy Awards 2009
Category : On-Grid
Off-Grid
Title of Activity / Project / Theme :
RURAL ELECTRIFICATION WITH MINI HYDRO POWER (Ma Mya Dam)PROJECT
Content
Chpt.
No.Description Page No.
1 Originality 1
1.1 Design 1
1.2 Application 2
1.3 Approach 2
2 Environmental And Social Consideration 3
2.1 Amount of Emission Avoided (CO2,etc in tons/yr) 3
2.2 Community / People Participation 3
2.3 Benefits 3
2.3.1 Benefit to User 3
2.3.2 Benefit to Community 4
2.3.3 Benefit to Country 4
2.3.4 Other Features 4
3 Technical, Economical And Market Consideration 5
3.1 Installed Capacity 5
3.2 Technical Design 5
3.3 Technical Performance 7
3.4 Investment Cost 7
3.5 Financial Scheme / Livelihood Project 8
3.6 Funder (Government and Non-Government) 8
3.7 Market Size (Potential within 5 years) 8
3.8 Local Manufacturing / Content of System 9
3.9 Amount of Energy Avoid 9
8/2/2019 Micro Hydro by Irrigation Water
http://slidepdf.com/reader/full/micro-hydro-by-irrigation-water 19/20
APPLICATION FORMASEAN Renewable Energy Project Competition
ASEAN Energy Awards 2009
Category : On-Grid
Off-Grid
Title of Activity / Project / Theme :
RURAL ELECTRIFICATION WITH MINI HYDRO POWER (Ma Mya Dam)PROJECT
Content
Chpt.
No.Description Page No.
4 Operation And Maintenance Scheme 10
4.1 Operation Hours (day / month / year) 10
4.2 Maintenance Scheme (In house, contracted out service,
Government, Others10
4.3 Other Maintenance Measures (Training, After Sale
Service)11
4.4 Local Service Content 11
5 Replicability 12
5.1 Replicability of project (Relevance, Impact, Efficiency) 12
5.2 Cost Effectiveness (No, Low, High cost) 13
5.3 Sustainability of Project 13
5.4 Others (Life of Project) 13
6 Figures, Tables, Photos 14
Conclusion 14
Project Location 15