metering and custody - Koma Training and...
4
pg. 1 OBJECTIVE: This course is developed for engineers and technicians who need to have a practical knowledge of selection, installation and commissioning of fiscal metering equipment. It is for those primarily involved in achieving effective results in industrial processes. This would involve the design, specification and implementation of control and measurement equipment. The course focuses on practical applications, with special attention to installation considerations and application limitations when selecting or installing different measurement or control instruments for fiscal metering. Metering System and Custody Transfer for Oil &Gas Schedule : as requested Venue : Banana Inn Hotel Bandung Jl. Dokter Setiabudhi 191 Bandung KOMA Training & Consultancy Services www.komatraining.co.id Cibeureum Raya A7/40 Bandung Phone : 087825777299 Fax : 0226071430 [email protected] [email protected] Instructor : Augie Widyotriatmo.ST.MT.PHd We will organize this activity with a minimum of 3 participants | cost of training activities IDR 8.000.000 excludes tax 3 EASY WAYS TO REGISTER • Email: [email protected] | [email protected] • Phone: +6222 6071430 | 0878 25 777 299 • Fax: +6222 6071430 • Visit us at : WWW.komatraining.co.id
Transcript of metering and custody - Koma Training and...
pg. 1
OBJECTIVE:
This course is developed for engineers and technicians who need to have a practical knowledge of selection, installation and commissioning of fiscal metering equipment. It is for those primarily involved in achieving effective results in industrial processes. This would involve the design, specification and implementation of control and measurement equipment. The course focuses on practical applications, with special attention to installation considerations and application limitations when selecting or installing different measurement or control instruments for fiscal metering.
Metering System and Custody Transfer for Oil &Gas
Schedule : as requested
Venue : Banana Inn Hotel Bandung
Jl. Dokter Setiabudhi 191 Bandung
KOMA Training &
Consultancy Services
www.komatraining.co.id
Cibeureum Raya A7/40 Bandung
Phone : 087825777299 Fax : 0226071430
[email protected] [email protected]
Instructor :
Augie Widyotriatmo.ST.MT.PHd
We will organize this activity with a minimum of 3 participants | cost of training activities IDR 8.000.000 excludes tax
3 EASY WAYS TO REGISTER • Email: [email protected] | [email protected] • Phone: +6222 6071430 | 0878 25 777 299 • Fax: +6222 6071430
• Visit us at : WWW.komatraining.co.id
COURSE OUTLINE:
1. Introduction to Fiscal and Custody: • Introduction • Meter Proving
2. Basic Fluid Flow:
• Fluid property,Compressible & Incompressible flow,Fluid Flow • Pipe fluid flow • Fluid Flow Measurement
3. Performance Characteristic of Flowmeter
• Accuracy,Repeatability,Performance Measure • Calculation
4. Head Flow Meter • Orifice,Flow Equation,Sizing • Secondary Instrument
5. Calibration of Flow Meters in Air/Gas/Water and Oil Medium • Calibration of flow meters
using primary & secondary standards
• Pressure measurement and calibration/calibration of Geometrical parameters
• Temp measurement and calibration
• Density measurement and calibration
6. Turbin Meter
• Design, Operation, Performance
7. Standard AGA 3 and AGA-7 AGA-9
• Introduction to Standard AGA7
• Meter Tube • Volume rate with AGA-7
and API • Orifice Sizing Accd.ing to AGA-9 & API
KOMA Training & Consultancy
Services
www.komatraining.co.id
Cibeureum Raya A7/40 Bandung
Phone : 087825777299
Fax : 0226071430
[email protected] [email protected]
8. Ultrasonic Flow Meter • Basic Principle • Time travel Method • Performance Requirement
9. Coriolis Meter
• Coriolis Flowmeter • AGA 11 + API
10. Proving Flow Meter API
• Meter Run,. Proving Skid,Meter Proving, Meter Factor,Base Prover. Proving Run,Prover Pass, Prover Round Trip,Proving Counter
11. Calculation Sample
KOMA Training &
Consultancy Services
www.komatraining.co.id
Cibeureum Raya A7/40
Bandung Phone : 087825777299
Fax : 0226071430
[email protected] [email protected]
Instructor’s Profile AUGIE WIDYOTRIATMO, ST., MT., Ph.D. Instrumentation & Control Research Group, Engineering Physics Program, Faculty of Industrial Technology Bandung Institute of Technology (ITB) LABTEK VI, ITB, Ganesha 10, Bandung, Indonesia Birth Place/Date: Bandung, August 4, 1977 Education: Degree Field Institution Date Conferred Ph.D. Mechanical Pusan National University (PNU) Aug. 2011 Engineering Korea M.Eng. (MT) Instrumentation ITB, Indonesia Aug. 2006 & Control B.Eng. (ST) Engineering ITB, Indonesia Feb. 2002 Physics Work Experiences: Jan 2014 – Dec 2014 Head, Procurement Services Department, ITB Jan 2013 – Dec 2013 Procurement Official, Directorate of Logistics, ITB Dec. 2010 - Present Faculty Member, Engineering Physics Program, Faculty of Industrial Technoogy, ITB, Indonesia Feb. 2008 - Aug. 2011 Editorial Assistant, Journal of Mechanical Science and Technology. Feb. 2003 - Aug. 2007 Lecturer, Dept. Electrical Engineering, Indonesia Computer University, Indonesia Educational Teaching Experiences: - System Dynamics and Simulation - Mechatronics and Robotics. Automation Systems - Automatic Control, Computer Interfacing and Data Acquisition,- Instrumentation System - Logics and Digital Systems, Signal Processing, Workshop/Tutorial Presentations (1) Speaker, “Robotika dan Kontrol,” Workshop Fakultas Ilmu Komputer,Universitas Sriwijaya, 2013. (2) Speaker, “Autonomous Mobile Robots Research,” Workshop on Robotics,Cogno-Mechatronics and and Intelligent Computational System 2013. (3) Speaker, “Control Technologies for Autonomous Mobile-Robots,” Workshop on2012 IEEE Conference on Control, Systems, & Industrial Informatics, 2012. (4) Speaker, Intelligent Wheelchair: Command and Control,” Workshop onIntelligent Wheelchair: towards Brain Controlled Robots, December 2012. Professional Trainer Experiences (1) Advanced Pneumatic Control, LAPI-ITB, Bandung, 2014 (2) Custody Transfer and Metering Systems for Oil and Gas, In House TrainingIndonesia Power, PT. Koma Training, Jakarta 2014. (3) Advanced Flow Measurement,PT. Total Optima Program, Bandung, 2014. (4) Calibration and Alignment of Level Controller, In House Training PT. ChevronPacific Indonesia, PT Petratama Abdi Nusa, Duri-Riau, 2014 (5) Instrumentation and Control, In House Training PT. Chevron Pacific Indonesia,PT Petratama Abdi Nusa, Duri-Riau, 2014 (6) Fundamental of Electrical Engineering, In House Training PT. Chevron PacificIndonesia, PT Petratama Abdi Nusa, Duri-Riau, 2014 (7) Substation Equipments and Control Relay, In House Training PT. ChevronPacific Indonesia, PT Petratama Abdi Nusa, Duri-Riau, 2014 (8) Advanced Regulatory Control, Advanced Process Control using DistributedControl Systems, Center of Instrumentation Technology and Automation (CITAITB), 2014 (9) Industrial Robotics: Sensing, Planning, and Control, PT. Mairodi MandiriSejahtera, Bandung, September 16-19, 2013. (10) Alarm and Protective Devices, In House Training PT. Chevron PacificIndonesia, PT. Fiqry Jaya Manunggal, Rumbai, September August 12-16, 2013. (11) Electrical Measurement and Instrumentation, In House Training PT. ChevronPacific Indonesia, PT. Fiqry Jaya Manunggal, Rumbai, September, August 12-16,2013. (12) Meter Prover System, In House Training PT. Chevron Pacific Indonesia, PT.Fiqry Jaya Manunggal, Rumbai, August 19-22, 2013. (13) Self Operating Hand Valved, Patrarijaya Consultant, September 18-20, 2012.(14) Flow metering & Custody Transfer, Center of Instrumentation Technology andAutomation (CITA ITB), 2011 - 2013. (15) Metering System & Automatic Tank Gauging, Center of InstrumentationTechnology and Automation (CITA ITB), 2011 - now. (16) Basic Instrumentation, Center of Instrumentation Technology and Automation (CITA ITB) , 2011 - now.
Our Valued Customers
Company Profile
Memulai bisnis sejak tahun 2009 di Bandung, Koma Training & Consultancy fokus kepada pengembangan kualitas Sumber Daya Manusia. Peningkatan Sumber Daya selama ini diharapkan oleh setiap perusahaan di seluruh Indonesia bahkan dunia. Kami memiliki kualitas pelayanan terbaik serta instruktur terbaik untuk menunjang perusahaan-perusahaan yang bekerja sama dengan kami agar dapat mencapai tujuan bersama, yaitu mengembangkan kualitas Sumber Daya Manusia di dalamnya. Beragam perusahaan telah bekerja sama antara lain Chevron Pacific Indonesia, Pertamina (Persero), Pertamina EP, Pertamina Geothermal Energy, CNOOC, Conocophillips, Indonesia Power, PLN, Freeport,serta banyak perusahan energi dan mining lainnya di Indonesia. Bekerja sama dengan dosen serta pakar dari lembaga-lembaga pendidikan formal di Indonesia, antara lain Institut Teknologi Bandung (ITB), Universitas Parahyangan (UNPAR) dan Universitas Padjadjaran (UNPAD), kami senantiasa memberikan kualitas materi terbaik pada setiap kegiatan pelatihan yang dilakukan. Tidak hanya berfokus pada kepentingan bisnis, KOMA juga senantiasa melakukan perbaikan layanan dan kualitas komunikasi antara penyedia layanan serta klien nya. Sebagai Training Provider yang berpengalaman di Indonesia, layanan kami tidak sebatas pada Public Training maupun In House Training. Kami juga menyediakan kebutuhan rekayasa engineering, Konsultasi Psikologi, serta layanan perniagaan yang erat kaitannya dengan lembaga pendidikan maupun sektor usaha pemerintahan/ non pemerintah. Setiap layanan yang kami berikan akan memberikan nilai tambah bagi customer serta stakeholder yang terkait di dalamnya. Kunjungi website kami di www.komatraining.co.id untuk informasi yang lebih lengkap tentang perusahaan kami, jadwal pelatihan serta informasi lainnya terkait dengan training & development program.
