MEMBERS OF THE ELECTRICAL - eiauk.orgeiauk.org/wp-content/uploads/2017/02/brochure2017.pdfMEMBERS OF...

7

Transcript of MEMBERS OF THE ELECTRICAL - eiauk.orgeiauk.org/wp-content/uploads/2017/02/brochure2017.pdfMEMBERS OF...

Page 1: MEMBERS OF THE ELECTRICAL - eiauk.orgeiauk.org/wp-content/uploads/2017/02/brochure2017.pdfMEMBERS OF THE ELECTRICAL INSULATION ASSOCIATION AEV Ltd ... aerospace industries and powder
Page 2: MEMBERS OF THE ELECTRICAL - eiauk.orgeiauk.org/wp-content/uploads/2017/02/brochure2017.pdfMEMBERS OF THE ELECTRICAL INSULATION ASSOCIATION AEV Ltd ... aerospace industries and powder
Page 3: MEMBERS OF THE ELECTRICAL - eiauk.orgeiauk.org/wp-content/uploads/2017/02/brochure2017.pdfMEMBERS OF THE ELECTRICAL INSULATION ASSOCIATION AEV Ltd ... aerospace industries and powder

MEMBERS OF THE ELECTRICALINSULATION ASSOCIATION

AEV LtdMarion Street, Birkenhead, Merseyside, CH41 6LTTel: +44 (0) 151 647 3322e-mail: [email protected]: www.aev.co.ukAEV Ltd manufactures insulating varnishes, resinsand compounds for supply to the electrical andelectronics industries world-wide. With strategicallyplaced operations in the U.K, Spain and Malaysia,the range can be supplied to most export marketsincluding the 75 already serviced.

Attwater GroupHopwood Street, Preston, Lancashire PR1 1UNTel: +44 (0)1772 258245e-mail: [email protected] Website: www.attwater.com Attwater is the longest established and a leadingUK manufacturer of engineering composite sheetand tube to recognised International Standards.This includes contract manufacture of customer’smaterials. Typical products include SRBP, SRBFand SRBG laminated sheet and tube which areused in a wide range of applications includingaircraft components, electric motors, bus-barsupports, transformers, generators, distributionboards, gaskets and seals. Sectors suppliedinclude power generation, nuclear, rail, automotive,aerospace, oil & gas and general engineering.Attwater Group operates a Quality ManagementSystem to ISO9001 and AS9100 Rev. C standards.

Bastion Glassfibre Rod & Sections Ltd12 Harvey Close, Crowther Industrial Estate, District 3, Washington, Tyne & Wear NE38 0ABTel: +44 (0) 191 416 6394e-mail : [email protected] : www.bastion-ltd.co.ukBastion is the leader in pultrusion of epoxy bondedglassfibre reinforced rods and sections. Wemanufacture a unique series of tie rods andsilicone rubber covered insulators with crimpedmetallic end fittings. Used within the switchgearand railway electrification industries.

Cable Tapes (UK) Ltd.New St Marks Works, New Marks Lane,

Manchester, M7 4FETelephone 0161 740 9503e-mail: [email protected] : www.cabletapesuk.comWe provide a single source for all cable-lappingtapes to the UK and European cable industry. Ourcore products are mica tapes and mica tapedconductor, polyester tapes, aluminium laminates,woven glass tapes and a full portfolio of film, foillaminate, metal and water blocking tape products.Mica sheets and bespoke punched parts are also

available. We have 8 new vertical tapingmachines, and can offer a fast turnaround tapedconductor service. We pride ourselves onproviding the highest level of industry knowledge,customer service along with excellent value formoney.

Calder Coating LtdA84 Red Scar Business Park, Longridge Road,

Preston, Lancs, PR2 5NDTelephone 01772 429190e-mail: [email protected] and Lamination service for water-based, solvent-based, or 100% solids solutions applied to flexible substrates of paper, film or foil. We cancoat pre-pregs, resins, adhesives and other functional coatings with a very high degree of precision. We make no products of our own, so there is no conflict of interest. We always work on a confidential basis.

Circuit Component Supplies LtdUnit 4, Lynstock Way, Bolton, Lancs, BL6 4SATel: +44 (0) 1204 460360e-mail: [email protected]: www.ccstapes.co.ukManufacturer of an extensive and sophisticatedrange of technical self-adhesive tapes for a widerange of applications in many sectors, including theelectrical, electronic, telecommunication,aerospace industries and powder coating tapesand die-cuts for the finishing industries.

Croylek Limited23 Ullswater Crescent, Coulsdon, Surrey, UK

CR5 2UY Tel: +44 (0)20 8668 1481e-mail:[email protected] of a wide range of electrical insulationmaterials, cables and harnessing products usedin all electrical industries as well as automotiveand transport systems. The range includessleevings, tapes, expandable braids, laminates,rigids, and flexibles, high temperature cables,varnishes, and silicones, many of these carryingUL and other approvals.

ELANTAS Europe GmbHManchester Sales Office, Keate House, 1 Scholar Green Road,Cobra Court, Manchester, M32 0TRTel: +44 (0)161 864 1689e-mail : [email protected] : www.elantas.comELANTAS Europe is a leading manufacturer ofinsulating materials for the electrical andelectronics industry with the broadest productportfolio based on chemistry and applications. Ourproduct portfolio includes wire enamels,impregnating resins and varnishes, casting andpotting resins, electronic coatings, adhesives andflexible electrical insulation materials.

Page 4: MEMBERS OF THE ELECTRICAL - eiauk.orgeiauk.org/wp-content/uploads/2017/02/brochure2017.pdfMEMBERS OF THE ELECTRICAL INSULATION ASSOCIATION AEV Ltd ... aerospace industries and powder

Esspee Fabrications LtdMerton Bank Road, St Helens, Merseyside, UK, WA9 1DZTel: +44 (0)1744 28304e-mail: [email protected]: www.esspee.co.ukEsspee manufactures a wide range of compositeand insulation materials which are supplied into theelectrical, medical, general engineering and railindustries. These include materials for electricalinsulation used in switchgear equipment,engineering and thermoplastics and laminatedcomposite bearings and wear pads fort the generalengineering and rail industries.

Holbourne Industrial Plastics LtdUnits E3 & E4 Phoenix Works, Middlemore Lane West, Aldridge, West Midlands, WS9 8BGTel: 01922 745080Fax: 01922 458938e-mail: [email protected]:2008 stockist and fabricator of electricalinsulating materials, including thermoset laminates(SRBP/SRBF/Epoxy & Silicone Glass) and PGM,manufacturing our own laminated tubes(round/square/rectangular and angles) and alsofabricated transformer bobbins.An extensive range of thermoplastics, includingacrylic, polycarbonate, nylon, acetal, PTFE & PEEKare also available either as stocked shapes or,machined components.

Huntsman Advanced Materials (UK) LtdIckleton Road, Duxford , Cambridge CB22 4XQTelephone: +44 (0) 1223 83 2121e-mail: [email protected] and [email protected]: www.huntsman.comA global leader, manufacturer and supplier ofAraldite® epoxy resin systems, and Arathane®polyurethane resin systems for electricalcomponents. Thermosetting resin systems formanufacture of insulation components for LV, MV andHV electrical equipment and for the consumer-electrical, automotive and other applications.Accredited to ISO 9001:2008 / EN 9100: 2009, ISO14001:2004 and OHSAS 18001:2007

IMS Insulation Machining ServicesUnit 15, Sladeburn Industrial EstateSouthport, PR9 9JFTel 01904 226 878Fax 01904 225 857e-mail : [email protected] specialises in the manufacture, machining andsupply of high temperature insulation materials andcomponents for use throughout industry world-wide.Several locations in the UK and outletsthroughout the world ensure we can provide themost comprehensive range of insulation materialsand technical support to our customers. With over

forty years service to industry, we have productsthat serve all industrial sectors including powergeneration, petrochem, rail, offshore, steel,aluminium, glass, incineration, OEM’s andinduction heating.IMS works in conjunction withmany of the world’s leading manufacturers andsuppliers of insulation products. With this jointapproach you can be assured that you will bereceiving products of outstanding quality with thefull support of IMS and the materialmanufacturer.

Insulution LtdPlas Clough Farm, Graig Road, Denbigh, LL16 5USTel : 01745 814723e-mail: [email protected]: www.insulution-ltd.comFlexible multi-layer insulation materials for usein electrical machines as interlayer, slot andinter-phase insulation. Components andmaterials of pressboard and presspaper foruse in oil-filled power transformers anddistribution transformers.

Jones Stroud Insulations Ltd(A Member of the Krempel Group)Longridge, Preston PR3 3BS, UKTel: +44 (0)1772 783 011e-mail: [email protected]: www.jsi-krempel.comManufacturer of a wide range of electricalinsulation materials for LV and HV rotatingmachines, transformers and cables as well asother specialist coil markets, including micapapercomposites for resin rich and VPI technology, pre-pregs, sealing tapes, sleevings, woven tapes,bracing cords and conductive materials forcomplete insulation systems.

Lamina Dieletrics Ltd.Daux Road, Billingshurst, West Sussex, RH14 9SJTelephone 01403 783131Fax 01403 782237e-mail: [email protected] Dielectrics Ltd leads the world in themanufacturing of Heat Shrink and Non ShrinkTubes and Endcaps that provide electricalinsulation as well as mechanical protection.Laminas unique spiral-winding and extrusiontechnology use UL approved materials under ULregistration E348131 to manufacture thermalprotectors, loudspeaker voice coil formers,battery sleeves and components that providereliable protection fro electric motors hermeticcompressors and transformers.

Page 5: MEMBERS OF THE ELECTRICAL - eiauk.orgeiauk.org/wp-content/uploads/2017/02/brochure2017.pdfMEMBERS OF THE ELECTRICAL INSULATION ASSOCIATION AEV Ltd ... aerospace industries and powder

Langtec Limited1 Calder Court, Altham, Accrington, BB5 5YBTel: +44 (0)1282 772 544e-mail : [email protected] : www.langtec.co.ukLangtec are manufacturers and machinists ofparallel and tapered tubular products in mica,epoxy, silicone, melamine, polyester, phenolic andcarbon fibre. With Shannonvale fibre tubes inSouthern Ireland part of the Langtec group, tubesof up to 4 meters long can be supplied. Qualityapproval ISO 9001.

M&I Materials Ltd.Hibernia Way, Trafford Park, Manchester, M32 0ZD, UKTelephone: +44 (0) 161 864 5449e-mail: [email protected] : www.mimaterials.comA product of M&I Materials, MIDEL is the world’sleading brand of ester-based dielectric fluids.MIDEL is chosen by utilities and transformermanufacturers because of its excellentperformance track record and ability to minimiserisk. Our synthetic ester MIDEL 7131, and naturalesters MIDEL eN 1204 (rapeseed) and MIDEL eN1215 (soybean), provide superior fire safety andgreater environmental protection than conventionaldielectric fluids. They also deliver exceptionalmoisture tolerance which increases protection ofcellulose insulation and potentially extendstransformer life. Call us or visit www.midel.com formore information.

Mekufa (UK) Ltd Permali Park, Bristol Road, Gloucester, GL1 5SR Tel: +44 (0) 1452 520 850e-mail: [email protected]: www.mekufa.co.ukMekufa produces HV bushings and insulators up to72.5kV, using SRBP and epoxy resin insulation, andthe processes of paper winding, vacuum casting andpressure gelation. Bespoke products include tractioncable terminations and air feed insulators up to 25kV,and trackside roof and wall bushings up to 52kV.Accredited to ISO 9001-2000.

P.A.R (Insulations & Wires ) Ltd,Foxwood Close, Foxwood Industrial Park,

Chesterfield, Derbyshire, S41 9RBTel : 01246 261828e-mail: [email protected] : www.par.uk.comP.A.R. is a specialist company providing productsand systems for the manufacture and repair ofelectrical and electronic equipment in the powergeneration, power distribution, powertransformation and power consumption industries.

Presspahn LtdWharncliffe Works, Harrogate Road, Bradford, BD2 3TBTel : 01274 636333e-mail : [email protected] : www.presspahn.comPresspahn is a specialist engineering solutionsprovider who has built a reputation for supplyingElectrical Insulation, Thermal Insulation, MicaInsulation materials and component parts to awide range of industries. Leveraging modernmanufacturing techniques we ensure oursolutions are delivered using innovation,precision and consistency while at a cost andlead time to suit your requirements. We areconfident that our passionate, specialist andhelpful staff can find the right solution for you.

Röchling Engineering PlasticsWaterwells Business Park, Waterwells Drive, Quedgeley, Gloucester, UK, GL2 2AATel: +44 (0) 1452 727 900e-mail: [email protected] Website: www.roechling-plastics.co.ukWith its worldwide subsidiaries, the RöchlingEngineering Plastics Group is an internationalleader in the manufacture and machining ofengineering plastics for the investment goodsindustry. Our products include semi-finishedcomponents (sheets, rods, profiles). On request,we can also provide you with machined finishedcomponents made from thermoplastics, fibrereinforced plastics, and laminated densifiedwood.

Sleeve-ItSyke Mill, Belthorn Rd,, Belthorn, Blackburn, Lancs, BB1 2NNTel: +44 (0) 1254 694 733e-mail: [email protected] of silicone products, hightemperature electrical sleeving, woven glass tape,adhesive tapes and insulation kits.

3GK Ltd,Unit 5, Price St. Business Park,Park Street, Birkenhead,Cheshire, CH41 3PETelephone : 0151 647 5380e-mail: [email protected] Ltd was established in 2007 as an offset ofAEV Ltd for the distribution of all the insulationmaterial and ancillary items. 3GK Ltd is now anestablished export and distribution company. Theyare the agents and distributors for AEV Ltd in theMiddle East. 3GK Ltd also offer a wide range ofelectrical insulation materials and electric motorspares, all of which are itemised in our Big RedBook. 3GK Ltd also represents HoughtonInternational from the UK, for the manufacturing ofHigh Voltage Coils. 3GK Ltd can also supplyEnamelled Copper Wire and Copper Strip coveredor enamelled. 3GK Ltd with AEV Iberica in Spaincan supply complete VPI plants and solutions.

Page 6: MEMBERS OF THE ELECTRICAL - eiauk.orgeiauk.org/wp-content/uploads/2017/02/brochure2017.pdfMEMBERS OF THE ELECTRICAL INSULATION ASSOCIATION AEV Ltd ... aerospace industries and powder

Tufnol Composites LtdWellhead Lane, Perry Barr, Birmingham B42 2TBTelephone: +44 (0) 121 356 9351 e-mail: [email protected] Website:www.tufnol.comTufnol manufactures laminates, composites and prepreg materials which are used for components throughout engineering, especially in aerospace, rail transport, electrical equipment, offshore & marine, process machinery, safety equipment and top-end automotive applications. Standard sheets and profiles or finished components.

UK Insulations LtdSyke Mill, Belthorn Road, Belthorn, Lancs, BB1 2NN Telephone : +44 (0) 1254 264499e-mail: [email protected] : www.ukinsulations.co.ukLow-voltage insulation materials and ancillaries,including Nomex presspaper, board and NMNlaminates, Elephantide, Leatheroid, Presspahn,cotton and glass tapes, impregnated sleevings,Zyrad cables and a range of polyester, cellulose,polypropylene and other specialised films. Extrudedsilicone sleevings and profiles and a bespokeconverting service for customers’ own materials.

Universal Insulating Products LtdUnit 12, The Courtyard, Buntsford Drive,Bromsgrove, Worcs, B60 3DJTelephone: 03300 240 520e-mail [email protected] Insulating Products Ltd is a privately ownedcompany who are specialists in supplying Insulatingmaterials to the Electrical & Thermal industries. Withover 20 years of experience, we have put togetherthe most comprehensive range of materials availablein the market today. We offer GP03, UPGM203 inRed, White or Grey. UPGM204 and 205 in White,High temperature polyester 220 C all products areavailable from 2mm to 120mm. Epoxy Grades G10,G11 and FR4, also Threaded rods in a variety ofmaterials to suit your application. SRBP, SRBF andPressboard for oil filled transformers. H Class profilesand also Tube products. For thermal applications wecan supply Mica sheet and tube, also hightemperature insulation for platen and injectionmoulding tools and furnace applications.Whatever your requirements, our goal is to offer thebest quality and service at a competitive price.

Webster-Wilkinson LtdHalesfield 10, Telford, Shropshire, TF10 4QPTel : 01952 585701e-mail: [email protected] : www.webster-wilkinson.comWebster-Wilkinson supplies to global and homemarkets in the transmission and distribution sector.Core products include ceramic insulated bushingsfrom 415 V up to 66 kV, resin bushings and stand-offinsulators up to 36 kV along with an extensive range

of high voltage/high current connectors, cabletermination boxes and cubicles. Weidmann Whiteley Ltd(A member of the WICOR group)Pool-in-Wharfedale, Otley, West Yorkshire LS21 1RPTel: +44 (0)113 202 7000e-mail: [email protected]: www.weidmann-electrical.com Manufacturer of electrical insulation products forHV power transformers, switchgear, cables, powercapacitors, domestic appliances, fhp motors andgeneral electrical equipment. Products includeelectrical insulating pressboards, laminates,presspapers, flexible laminates, HV/LV insulatingsystems, structures and components. Suppliers oftransformer accessories, aramid boards papers,parts and equipment.

Wire Electric Supplies LtdStag Business Park, Donnington Wood, Telford,TF2 7NATel: +44 (0) 1952 208730e-mail: [email protected]: www.wes.uk.comWES was founded by Mark Robinson as WireElectric Supplies Ltd in 1990 with the soleobjective of providing the best service, qualityand product range to the electric coil windingindustries. In a market place which is dynamicand constantly evolving, WES continues to setthe standard in product development and serviceback-up, supplying our customers with the verybest products that money can buy.

Page 7: MEMBERS OF THE ELECTRICAL - eiauk.orgeiauk.org/wp-content/uploads/2017/02/brochure2017.pdfMEMBERS OF THE ELECTRICAL INSULATION ASSOCIATION AEV Ltd ... aerospace industries and powder

THE ELECTRICAL

INSULATION

ASSOCIATION

The Electrical InsulationAssociation (EIA) wasfounded in 1911 as a

trade associationwithin the BEAMA

Federationrepresenting UK companies

which manufacture andsupply all types of electrical

insulation materials andproducts

Visit our website at

www.eiauk.org

Further details of theEIA are available from:

The Secretary,The Electrical Insulation

Association,36 Greenfield Road,

Stafford,ST17 0PU, UKTel: +44 (0) 1785 661306

[email protected]

The Electrical Insulation Association (www.eiauk.org)The Electrical Insulation Association (EIA) is a modern, forward-thinking, trade association that represents UK companies whose business includes the manufacture or supply of electrical insulation materials and composite products for the domestic and industrial markets. Founded in 1911, the EIA was a trade association within the Federation of British Electrotechnical and Allied Manufacturers' Associations (BEAMA) until 1998 when it adopted its own Secretariat and became autonomous.

The EIA provides an active forum to consider technical, environmentaland commercial matters that arise within the electrical insulation industry which are of mutual interest to the Membership. EIA Members produce multi-million pounds worth of electrical insulation and composite products annually, a significant proportion of which is exported to Europe and the rest of the world. The Members of the Association have developed extensive experience in the production and supply of insulation materials and technical services and this has equipped them well to meet the needs of customers throughout the world.

Technical StandardsOne of the primary functions of the Association is to participate in the development of national and international standards. Technical experts from Member companies regularly attend or lead BSI and IEC Meetings and thereby influence the establishment of key criteriafor material and product quality. The feedback from these meetings is passed on to Members through General Meetings of the Association, which are held at approximately 4 monthly intervals, and its internet website.

Industry SeminarsThe EIA recognises that electrical insulation engineering is a specialised subject and for many years the Association has held a series of one-day seminars. The format of these seminars reflects market needs and the topics chosen for the present series of industry seminars range from technical to commercial issues. Theseseminars are free to Members and form part of the annual calendar of events of the Association.

International Insulation Conference (INSUCON)EIA is the organiser and main sponsor of the International Electrical Insulation Conference (INSUCON) that has taken place at approximately four yearly intervals since 1970. This three-day conference is a premier international forum on insulation technology,with invited keynote speakers to overview trends and developments for the future followed by a series of presentations from scientists and engineers active in the field of electrical insulation. The Conference takes place in conjunction with a specialist exhibition dedicated to the electrical insulation market. These combined events provide exhibitors with a unique opportunity to reach a major international gathering of electrical insulation buyers and manufacturers. The most recent INSUCON was held in 2017 at Austin Court, the Birmingham (UK) Headquarters of the Institution ofEngineering and Technology. (www.insucon.org)