Medical Gas Solutions

A trusted source for all your medical gas needs

MANIFOLD SYSTEMS

Powerex Genesys® fully-automatic manifold systems incorporate innovative features that improve safety, reduce manifold system costs, enhance serviceability, and provide industry-leading reliability. Key features include:• Use of transducers instead of pressure switches.

• Improved safety – alarm generated immediately if failure.• Improved accuracy – ±1% accuracy vs. ±5% for pressure switches.• Lower cost than pressure switches.

• Custom 400 psig differential rated solenoid valves.• Easy to service

• Simple, 2D layout.• Union fittings before and after all serviceable components.

• Field convertible (i.e. standard flow to high flow, cylinder x cylinder to liquid x liquid).

• Reduce waste – exclusive Economizer Software for liquid cabinets ensures that all liquid is used when the vessel is deemed empty.

Powerex Alarm Panels are designed to save valuable wall space while providing the utmost in safety and reliability. Powerex offers the following Alarm Panel configurations:• Master alarms – up to 64 signal points.• Area alarms – up to 14 gas modules.• Combination alarms.• Industry-first Wireless Master Alarm Panels – now NFPA 99 compliant

– reliably communicates with source equipment while saving money on low voltage wiring.

Powerex Alarm Panels are ETL listed to UL 1069 and are made in the USA.

ALARM PANELS

OUTLETS

Powerex medical gas outlets and risers represent the most technically advanced means of providing medical gas connections to medical gas piping systems. Industry-leading features include:• Double O-ring seal design.

• O-rings made of robust Viton® material – lasts 4 times longer than competitive barrel grommets.

• Close tolerance fit with metal to metal contact – will support up to 10 lbs. at 2” without leaks.

• Frontall™ removable front assembly; easily maintain/replace outlets without shutting down the gas service.• 360° swivel inlet tube.• Durable, protective, vinyl gas identification label.All Frontall™ outlets are ETL listed to UL 1331 and SCAZ9170-1 and conform to NFPA 99 and CGA standards. All outlets

are 100% tested for flow and leaks.

HYPERBARIC VALVE, OUTLETS & VENT BOX

We have designed the perfect solution for connecting medical gas and vent lines to hyperbaric chamber installations – the Hyperbaric Valve/Outlets/Vent Box. Designed with single point plumbing connections for fast easy installation and with a professional cosmetic look to make your Hyperbaric installation state of the art – the HCB incorporates Medical Air and Oxygen valves with gauges and DISS or an optional high flow (over 2,900 scfh) Oxygen outlet, along with a 1 ½” vent line. All outlets incorporate our unique Frontall™ front loaded cartridge design for easy and fast maintenance – without removing the front of the outlet. The window is “smoked” translucent removable plastic, providing access to the valves. All gas piping components are designed per NFPA 99 guidelines and cleaned per CGA G-4.1.

CONVERSION KITS

We offer an extensive line of medical gas outlet conversion kits, medical gas alarm conversion kits and nitrogen control panel conversion kits, eliminating the need to cut existing outlets, alarms or nitrogen control panels out of the wall. Leaking, obsolete, or discontinued equipment can be quickly upgraded with conversion kits at a significantly lower cost than replacing them.

ZONE VALVE BOXES

Powerex Zone Valve Boxes are configured vertically to maximize wall space and can include up to 8 ball valves per box. Valve sizes range from ½” to 2”. Key features include:• Forged brass (not cast), full port ball valves.• Ability to plumb left to right or right to left – dual gauge ports.• Type K copper extensions and locking handles.• Working pressure rating of 600 psi WOG (29in/Hg vacuum).• Plastic insulators to prevent galvanic corrosion.• Three piece in-line repairable valves.Powerex offers optional EZ Backfeed EZ Find Zone Valve Boxes with the transducer

located with the box. This provides a safe, fast method for backfeeding medical gases without shutting down the gas supply or disrupting patients. It also provides for an easy-to-locate and test location for transducers.All ball valves and plumbing are cleaned for use with oxygen in accordance with

GCA G-4.1.

Powerex products conform to NFPA 99, CSA Z305.5, CSA Z9170-1, are U.L. or ETL Listed and CSA certified where applicable.Powerex is certified to ISO 9001:2008.

Save wall space by combining the Area Alarm and the Zone Valve Box! The Integra product family streamlines design, installation, use, and service by combining the zone valve box and the area alarm into a single integrated panel. The Integra panel accommodates up to 7 gases vertically arranged in pipe sizes of ½” to 2”. Transducers are located within the box for easy testing.• Does not require re-calibration.• User-programmable high/low set points.• Adjustable packing with blow-out proof stem design.• Available with optional EZ Backfeed.

INTEGRA AREA ALARM / ZONE VALVE BOX

ADDITIONAL MEDICAL GAS PIPELINE PRODUCTS

Powerex offers a full line of additional pipeline products, including:• Gas control panels – N2, CO2, and Instrument Air.• Sleep Lab O2 Control Panel.• Check Valves.• Butterfly Valves.• Ball Valves.• Pressure Switches and Gauges.• Emergency Oxygen Inlets.

WHY POWEREX?

Powerex has been designing and packaging systems since 1988 and has built a foundation on engineering, innovation, quality and service to become a leader in both air and vacuum systems. Because of our high level of vertical integration and a full in-house engineering team, Powerex has the ability to customize a system to meet your air or vacuum requirements.

For more information, contact your local Powerex distributor or Powerex sales representative today!

Distributed by:

150 Production Drive • Harrison, OH 45030 • USA(T) 1.888.769.7979 • (F) 513-367-3125 • www.powerexinc.com

SL4560EAV 02/2015

• Multiple compressors.• ASME receiver.• UL listed control panel (PBMI or Basic).*• Air purification system.• Carbon monoxide monitor.• Dew point monitor.• All interconnecting piping and wiring.• Vibration isolation pads and flex connectors.

Configuration types:

MEDICAL GAS SOURCE EQUIPMENT

MEDICAL AIR MEDICAL VACUUM

• Multiple vacuum pumps.• ASME receiver.• UL listed control panel (PBMI or Basic).*• All interconnecting piping and wiring.• Vibration isolation pads and flex connectors.

Configuration types:

Tank-Over Skid Mount Modular Skid Mount

Vertical Tank MountHorizontal Tank Mount

*Control panel options vary per system. Please consult your sales representative.

All systems are fully compliant with the latest edition of NFPA 99 and are manufactured in ISO 9001 certified facilities.

Medical Enclosed Scroll

Horizontal Tank MountSkid Mount