Mechanical Components and Control Engineering III - · PDF fileMechanical Components and...

18
Applied Mechanics and Materials Vols. 668-669 Mechanical Components and Control Engineering III Selected, peer reviewed papers from the 3rd Asian Pacific Conference on Mechanical Components and Control Engineering (MCCE 2014), September 20-21, 2014, Tianjin, China von Weimin Ge 1. Auflage Trans Tech Publications 2014 Verlag C.H. Beck im Internet: www.beck.de ISBN 978 3 03835 312 6 schnell und portofrei erhältlich bei beck-shop.de DIE FACHBUCHHANDLUNG

Transcript of Mechanical Components and Control Engineering III - · PDF fileMechanical Components and...

Applied Mechanics and Materials Vols. 668-669

Mechanical Components and Control Engineering III

Selected, peer reviewed papers from the 3rd Asian Pacific Conference on Mechanical Components and ControlEngineering (MCCE 2014), September 20-21, 2014, Tianjin, China

vonWeimin Ge

1. Auflage

Trans Tech Publications 2014

Verlag C.H. Beck im Internet:www.beck.de

ISBN 978 3 03835 312 6

schnell und portofrei erhältlich bei beck-shop.de DIE FACHBUCHHANDLUNG

Table of Contents

Preface, Committees and Sponsor

Chapter 1: Materials Science and Processing Technologies

Comparison Research of Aircraft Panels Connected by Friction Stir Welding and RivetingG.M. Ji, X.G. Cai, L. Zhang, H. Lai and B.W. Zhao 3

Controllable Tuning of the Spin-Dependent Transport in the Graphene SheetC.M. Liu, Z. Li, J.L. Wang, L.L. Zhao and Y. Wang 8

Discrete Element Simulation and Analysis for Max Density Curve Theory of MineralAggregate MixturesJ.X. Deng, X.D. Zhou, Y.T. Huang, Y. Liu and W.M. Fan 12

Dispersion Management and Nonlinearity Enhancement in a Hybrid Nanofiber with a HighIndex, Cross-Slot-Structure NanocoreK.W. Jiang, Y.T. Pan, G.J. Wang and J. Xiao 17

Effect of Carbon Nanotubes on Morphology and Property of Natural RubberX. Shi, J.X. Zhai, Y. Li and G. Zhong 22

First-Principles Study on Optical Properties of Cd-Doped Single-Walled (8, 0) ZnONanotubeY. Wu, J.C. Huang, Y.C. Cui and S.K. Zheng 27

Liquid Crystalline PET/60HBA-MWNTs Composite: Synthesis, Characterization, andPropertiesJ.W. Wang, X.M. Bai, Z.H. Li, Y. Zhang, Y.P. Wang and Y.M. Wang 31

Low Temperature Densification of ZnO-Based Ceramic Using Phenolic Resin as BinderH. Zeng, J.J. Xie, H.T. Liu and Z.Y. Fu 35

Mechanical Property and Corrosion Resistance of the E309L Buffer Layer in Weld OverlayZ.L. Wang and X. Ding 39

Multi Fractal Characteristic of Metal Material Worn Surface with Plant AbrasiveF.X. Wan, X.P. Huang, J.F. Wu and J.L. Huang 43

Preparation and Photoluminescence of Red, Green and Blue Fluorescent Dyes Co-DopedNanoporous Silica by a Sol-Gel MethodJ.L. Wang, X.L. Zhou, Z. Li and C.M. Liu 48

Research on Distribution Regularity of Nano-Sized WC in Cast SteelY. Han, A.L. Zhang, L. Yang and Y.L. Han 52

Research on Electrical Discharge Grinding of Polycrystalline Cubic Boron Nitride CuttingToolY.H. Jia and C.Z. Guan 56

Simulation of Fiber Orientation in Dumbbell-Shaped Injection CavityH. He and X.B. Chen 60

Structural Phase Stability and Electronic Properties of Magnesium under High Pressurefrom First-Principles CalculationsQ.X. Liu, R.J. Zhang and F. Zhang 64

Study of the Mechanical Properties of Ceramics Modified Composite Insulator MaterialsP.S. Liang, Y. Liang and Y.P. Liu 70

Study on the Critical Control of Foam Insulation Materials Produced by Waste TFT-LCDGlassL.L. She, Y.W. Guo, J.L. Ruan, Q. Qiao and S.B. Sun 74

Synthesis of a Cholesterylated Compound Containing Carboxyl Functional with PEG2000Chain for Hepatic Targeting Liposome LigandX.C. Wu, L. Hai and Y. Wu 79

The Analysis for Crystallization of Sn-Pb Alloys Using Acoustic Emission Testing aboutWind Turbine Root MaterialsH.W. Qin, X.X. Xing and X. Zhang 83

The Original Carbon-Copper Compound as a New Source of Electric PowerL.B. Kong, X.X. Xing and X. Zhang 87

Thermal Reaction Kinetics of Fly Ash Cement Paste at the Age of 28 DaysX.F. He, C.W. Miao, Y.H. Wu, X.X. Cao and D. Liu 91

Ellipsometry Analysis of MgxZn1-xO Films on Silicon SubstratesY.X. Yu, J. Lian, W.L. Guan and X.H. Yu 95

Failure Analysis of Differential Pressure Transmitter Impulse Pipe in High SulfurPurification DeviceX. Chen, Z. Zhu, Y.L. Wang, X.L. Pang, A.X. Pei, L.S. Zhang, K.W. Gao, Z.X. Wang and A.A.Volinsky 102

The Research of the Structure and Performance Based on Quantum Dot Light EmittingDevicesH. Ma, D.H. Li and H. Gao 107

Chapter 2: General Mechanical Engineering, Applied Mechanics andDynamics

A New Approach for Determining Bolt Load of Eccentric Bolted JointsX.W. Wang, X.Y. Li, X.G. Wang and L.L. Zhang 115

A New Numerical Method for Two Phase Flow in Heterogeneous Porous MediaX.L. Zheng 119

A Novel Tyre Force Distribution Method for Four-Wheel Independent Driving VehiclesC.L. Li, J.X. Wang and N. Chen 124

A Prediction Model for Equivalent Parameters of Cylindrical Fixed JointJ.X. Kang, J. Wang, Q. Zhang, A.X. Liu and Q.L. Shu 129

A Study on Conjugate Cam Beating-Up MechanismZ.J. Li, F. Li and H.J. Wang 134

Aerodynamics Study of Flow Past Two Tandem Bluff Bodies at Low Reynolds NumberG. Zhao 138

Analysis on Fracture Causes of Sub-Frame of a Type of Dump TruckZ. Li, J.H. Niu and H.G. Li 142

Application Analysis on Force Multiplication Drawing DeviceW. Liu, H.T. Wen, Z.T. Cui, H. Lou, Y.Z. Liu and Q.R. Shang 147

Chaotic Vibration of Fractional Calculus Model Viscoelastic ArchF. Huang, J. Huang and S.B. Dai 151

Drag Reduction on the 35° Slant Angle Ahmed Reference Body Using FlapsP. Guo, X.J. Hu and J.Y. Zhang 156

Dynamic Model and Vibration Characteristics of Planetary Gear Train Based onTransmission ErrorsK. Xu, P. Jia, M. Qiu and J.J. Yang 160

Effect of Clearance on Thermodynamic Characteristics of Woven Liner Spherical PlainBearingM. Qiu, C.C. Duan, L. Chen, Y.C. Li and R.S. Hu 164

Error Model of Machine Tool Based on Cutter Contacting Point Vector ChainY.H. Deng, S.K. Cao, J. Lv, K. Zhang and K.F. Song 168

Experiment and Numerical Simulation of the Local Loss in Axial Guide DeviceY.K. Lv and T. Wang 172

Fatigue Life Prediction and Verification for HIC Hermetical Sealing under RandomVibration LoadingX.Q. He, J.D. Wang, J.H. Zhu, X.P. Li and J.F. Liu 176

Finite Analytic Method for 2D Fluid Flows in Porous Media with Full Tensor PermeabilityZ.F. Liu 181

Finite Element Analysis of Pipe Joints under Torsion LoadJ. Han and H. Yuan 185

Force Analysis on Piston Assembly of Mine Rotor Wet Spraying MachineK.L. Feng, Y.P. Chen, G.G. Ma and Q. Li 189

Free Vibration of High-Rise Chemical Tower Controlled by Super-Elastic Shape MemoryAlloy CablesS.S. Sun, X.C. Liu and M. Lu 193

b Mechanical Components and Control Engineering III

Joint Application of UG/ADAMS/ANSYS in the Analysis of Landing GearH.Q. Zhu and N.M. Wu 197

Mechanical Characters of Six Engineering Timoshenko BeamsH.L. Tian 201

Mixed Lubrication and Friction Power Loss of Piston Ring PackX.R. Liu, G.X. Li, S.Z. Bai and Y.P. Hu 205

Modal Analysis and Unbalanced Response Analysis of Rotor SystemM. Huang, Z.Y. Xing, Y.Y. Zhao, J.N. Tang and H. Yuan 209

Modification of Finite Element Modeling and Analysis on Various Factors of Ruptureduring Square Plansifter RunningM. Qiu and Z.Q. Liao 213

Non-Linear Dynamic Modeling and Experiment of Harmonic Gear DriveH.B. Zhang, B. Pan, L. Wang, C. Wei, B.D. You and Y. Zhao 217

On the Force of Rotor-to-Stator Element Radial Rubs in Rotating MachineryL. Hong, L. Zhan and H. Qing 221

Optimization and Analysis of Z-Type Flexure Hinge Based on WorkbenchH.X. Bao, Q. Liu, R.Q. Wang, C.M. Zuo and X.Q. Zhou 226

Optimization and Design for Wind Turbine Airfoil at Multiple Working Conditions Basedon Genetic AlgorithmY.Q. Chen, Y.F. Fang and S. Guo 230

Research on CFRP External Pre Stress Reinforcing Vertical Crack of Box Girder RoofX.Z. Wang 236

Research on Hard Rock Tunnel Boring Machine Based on Digital MockupX.X. Zhao, Y.D. Gong and Q. Yao 240

Seismic Analysis and Redesign of the Center Row in Reactor CoreM. Huang, Y.Y. Zhao, Z.Y. Xing, H. Yuan and J.N. Tang 244

Simulation and Analysis for Composite Casing Aging Trend Based on ANSYSY. Liang and C.Y. Cui 248

Statics Analysis and Modal Analysis of the Beam Structure of Wave-Maker Based on FiniteElement AnalysisS.J. Wang and X.H. Mao 253

Stiffness Matching Design of Vehicle Bumper Anti-Collision Beam Considering EnergyAbsorption and Economical PerformanceL. Xia and H.B. Jiang 258

Structural Stiffness Optimization Under Dynamic LoadsX.Y. Teng, J.W. Tao and J.S. Han 264

The Amplitude Feature of Current Eigenfrequency for Motor Bearing Banded FailureG.Z. Cheng, C.D. Qiu, X.B. Wu and Z.Y. Xue 268

The Current Eigenfrequencies for Bearing Fault of Mixed Eccentric Motor Based onAmplitude ModulationJ.H. Ma, C.D. Qiu, J.J. Luo and G.Z. Cheng 273

The Impact to WELDOX960 Steel Welding Joint Made by Strength MatchZ.L. Wang and X. Ding 277

The Necessary Condition for the Existence of the Periodic Solution of Honeycomb SandwichPlate Dynamics ModelT.T. Quan, J. Li, X. Li and S.T. Zhu 281

The Numerical Simulation of Swirl Jet CharacteristicY.K. Lv, Z.C. Li and P.X. Wu 285

The Radial Fretting Character Research of the Shaft-Hub of Compress Impeller Based onVirtual Orthogonal ExperimentX.L. Lu, J.S. Zhao, X.Z. Huang and S.Y. Wang 289

The Roof Technology Research for LNG Cryogenic Storage Tank Based on ABAQUSJ.H. Yang, G.S. Yang and Z.Z. Ye 294

Treatment of Substructure Rigid-Body Modes in Close-Loop Coupling Disc Brake SquealModelP. Gao, Y.C. Du and H.C. Xia 298

Ultrasonic Testing for the Hardened Layer Depth of Induction Quenched 20CrMo AxleY.Y. Fan 302

Applied Mechanics and Materials Vols. 668-669 c

Effect of Acrylamide Modified Liner on Properties of Self-Lubricating Spherical PlainBearingsM. Qiu, R.S. Hu, Y.C. Li, Z.P. Yang and C.C. Duan 306

Research on the Acoustic Insert Loss in Water Filled PipesX.S. Lu, Q. Li and J. Liu 310

Numerical Simulation for a Backward-Facing Step Two-Phase Flow Using TOMTMJ.R. Xu, J.F. Gao and L. Wang 314

Two-Order Moment Trajectory Model of Two-Phase Turbulence Flow Based on ParticlePDF Transport EquationJ.R. Xu and L. Wang 318

Analysis of Configuration and Tension Force for Flexible Mattress by Lumped-MassMethodZ.Y. Li, P. Yang, Z.H. Sun and L.S. Liu 322

Aerodynamics Research of Thermal Fluid Circulation in a Heated CavityG. Zhao 326

Research on Coanda Effect Appeared in Oil-Air Annular Flow through the Conical DiffuserQ.G. Sun, Y. Wang and X.S. Wang 331

Orthogonal Experiment on Characteristic Parameters of Oil-Air Lubrication SystemQ.G. Sun, Z.H. Zhou and Y.F. Wang 336

Chapter 3: Mechatronics and Robotics

A Transformation-Based Integrated Modular Avionics Software Model ConstructionApproachY. Wang, J.Y. Wang and L. Wang 343

Kalman Filter-Based Robot Manipulator Five-Degrees of Freedom Uncalibrated VisionPositioningL. Liu, N. Wang, C.Z. Yu and D.T. Wang 347

Motion Model of Two-Wheel Differential Drive Mobile Robot under Variable LoadZ.H. Ruan, N. Wang and B.X. Ran 352

Research and Design of Auxiliary Power Supply for Motor Controller in Electric VehiclesZ.Y. Huang and Z.F. Chen 357

Research on the Kinematics of Line Heating Robot Based on SVMY. Li and Y.L. Chen 361

Setting-Up Wireless Communication System for Mine Rescue RobotsX.S. Xue, H.W. Ma and J. Wei 366

Rolling Bag Station Motor Decoupling Control Based on Multi-Agent on Automobile SafetyAirbagN.N. Zhang and G.L. Wang 370

Entering Direction Analysis of Matching Area of Underwater Terrain Aided NavigationBased on Variation FunctionZ. Rao, J.Y. Zhang and W.J. Yin 374

The Stewart Platform Dynamic Model Coupling Characteristic AnalysisL. Han 379

Topological Map Building Based on ThinningN. Wang, H.Y. Wang and Q.Q. Zhu 384

Survey of Cooperative Path Planning for Multiple Unmanned Aerial VehiclesX.M. Cheng, D. Cao and C.T. Li 388

Study on the Feasibility of Widely Usage of PSS in Multi-Machine Power SystemY.Y. Wen, M. Huang, G.P. Liu, Y.M. Liu and K. Zhao 394

An Entry Range Correction Scheme for Reusable Launch VehicleB. Yu, C.Z. Sun and K. Wang 406

Chapter 4: Control Technologies, Automation, Design and Simulation ofManufacturing

d Mechanical Components and Control Engineering III

A Novel Greenhouse Control System Based on Fuzzy Neural NetworkX.Y. Zhang 415

A Novel Switching Control Method for Hypersonic Flying VehicleJ. Wang, J.L. Liu, M. Wang and Y.Z. Wang 419

A Robust Controller for Positioning Control of Pneumatic Servo System: Design andExperiment TestsZ.J. Zhang 423

Adaptive Control of Systems with Time Varying Delay: A Sliding Mode ApproachF.X. Xie and B.H. Ji 428

An Expansion of LESO for Motion Control with High Frequency DisturbanceH.Q. Wang and H. Huang 437

Application of Fuzzy Control Simulation Human Intelligence Controller in Ferment Processof Supplying SugerL. Wang and Q. Feng 441

Application of Fuzzy PID Control Based on GA in Control ValveY. Zhou, Z. Wang and L. Yang 445

Application of Fuzzy PID Controller on Mine Local FanM. Zhang 450

Application of Hybrid Petri Net in Modeling of the Energy System in the Iron-MakingProcessH.J. Wang, K. Gao, H. Zhao and Y.J. Yue 454

Application of the Wavelet Fuzzy BP Network in the Automotive Fault DiagnosisB.Y. Lu 458

Decentralized Robust Coordinated Controller of Excitation and Valve for Improvement ofPower System StabilityZ.M. Li, X.Y. Deng, X.M. Mou, S. Rong, T.K. Sun and Z.N. Peng 462

Design and Research of Rotational Inverted Pendulum Control SystemY.F. Gong, H. Liu and X.Y. Li 466

Design of SVC Damping Controller Based on Biogeography-Based Optimization AlgorithmW.G. Yang, L.N. Ke, F.F. Dong and Z.P. Zheng 470

Fuzzy Controller for Semi-Active Automobile Suspension System under Random ProfiledRoad InputQ.H. Ma, J. Luo and C.Y. Zhang 474

Model-Based Design on the Application of Active Flow Control SystemL.W. Shi and N.M. Wu 478

Modeling and Simulation of Boost Converter with Voltage Feedback ControlQ. He 482

Modeling and Simulation of LQR Control for DC MotorQ. He 486

Numerical Simulation of Aircraft Ditching Based on ALE MethodW. Hu, Y.H. Wang and C.H. Chen 490

Numerical Simulation Technique of Disks Skipping Based on the SPH MethodY.H. Wang, C.H. Chen, T.Y. Zhao and W. Hu 494

Petri Net Automatic Modeling Method Based on System Behavior SequenceH. Fan, D.Q. Shu and L. Zhang 499

PRI Control Methodology for Grid-Connected Inverters in Harmonic Distorted Grid UtilityH.P. Lin, J. Hu, Q. Wang and Z.Y. Lu 508

Realization of Rotorcraft Control Based on Hybrid Fuzzy ControllerY. Sun, D. Wang, Y. Fang and F.H. Qi 514

Robust Optimal Design of Compliant Parallel Robot for the Complex Multiple ResponseProblemsC.Q. Wu and Y.F. Wu 518

Robust Predictive Control for NPC Grid-Connected InvertersL.J. Wang, T. Gong and J. Zhu 522

Simulation and Parameter Optimization for Vibration Control System of MLRS LauncherX. Zhao and D.Q. Luo 526

Study on LVRT Decoupling Dual Synchronous Current ControllerT.F. Liao, C.Y. Yi, Z.Q. Cai, C.W. Dong, W. Shi and J.X. Xue 532

Applied Mechanics and Materials Vols. 668-669 e

The Design and Implementation of Automatic Verification System of AnemometerH.G. Lu, J.P. Jiang, C.Y. Li and L. Wang 540

The Fuzzy PID Control Simulation Research of the Macro-Micro Servo Driven PositioningMechanismY.X. Xu and S.Q. Zhu 544

The Optimal Nonlinear PI Composed Control of Nonlinear Uncertain SystemX.L. Chen and X.T. Liu 549

Torpedo Interception Based on Differential Game StrategyR.F. Cheng and W.D. Liu 553

Data-Driven Based Temperature Prediction of Ferroalloy Electric Furnace SmeltingProcessN.N. Zhang and X. Liu 557

The Design and Realization of Ship Power Management System Based on ModbusJ.M. Huang and X.B. Zhang 561

The Simulation Research of 5KVA/400Hz Medium Frequency Power Supply inMatlab/SimulinkG.X. Wang, S. Zheng, W.J. You, Z.H. Zhou and Y. Li 567

The Application of Radial Basis Function Neural Network in Springback Prediction ofSheet FlangingL.F. Han and Z.L. Liao 571

Research of BP Neural Network Algorithm Testing Platform Based on OPCCommunicationB.W. Chen, X. Chen and H.P. Shu 575

Robust Integrity Design for Uncertain NCS with Actuator Saturation Based on DiscreteEvent-Triggered Communication SchemeH.C. Cao and W. Li 581

The Design and Implement of AIS SimulatorG.R. Wei and W. Wei 588

A Design and Implementation of Bootloader Based on MPC8280L. Wang and X. Chen 592

Chapter 5: Electrical Engineering and Electric Machines

Analysis and Simulation of a Limited-Angle Torque MotorZ.Y. Yu and Z.Q. Wang 601

Asynchronous Operation Analysis of Brushless Doubly-Fed Machine with Magnetic BarrierRotorY. Zhang, Z.C. Ma and H.M. Yu 607

Design and Analysis of Fractional-Slot Concentrated-Winding Permanent Magnet Machinefor Wind Power GenerationX.P. Wang, C.Y. Qu, X.F. Xu and D.R. Wang 611

Load Torque Observer Design of PMSMs for EVs Based on Square-Root UnscentedKalman FilteringJ.F. Chen, X.D. Sun, L. Chen and H.B. Jiang 615

Optimization Maneuver Strategy which Make the Loss of Height of UAV Minimum afterEngine StoppedK. Wang, C.Z. Sun and Y. Jiang 619

Performance Analysis of Novel Fractional-Slot Concentrated-Winding Permanent MagnetMachine with Different Pole and Slot MatchingX.P. Wang, C.Y. Qu, R. Guo and J.Y. Zhao 625

Research and Design of Permanent Magnet Synchronous Motor Vector Control for ElectricVehicleZ.Y. Huang and J.B. Chen 629

Research on Genetic Algorithm-Based Solution Method for Variable Cycle Engine ModelZ.J. Wu, R.H. Meng and J. Li 633

Research on Sensorless Control of PMSM Based on Sliding Mode ObserverZ.Y. Huang and X. Zheng 637

f Mechanical Components and Control Engineering III

Remaining Driving Range Estimation for Electric Vehicles through Information FusionMethodG.M. Liu, H. Fu, L.G. Lu, Y.J. Wang, J.F. Hua, J.Q. Li, M.G. Ouyang, C. Feng, S. Xue and P.Chen 641

The Directed Transport of Elastically Coupled Brownian Motors in a Two-DimensionalPotentialW.X. Wu 647

Chapter 6: Power System and Energy Engineering, its Applications

An ATP-EMTP-Based Simulation Method for Lightning Back Striking ConsideringImpulse Corona and Coupling Ground WireJ. Chen and B.Z. Liu 653

An Integrated Fault Phase Selection Scheme for Double Circuit Lines on the Same TowerS. Tian and F.F. Liu 657

Analysis and Application of Turbine Outages Kept Boiler of FCB Function in thePhilippines Mariveles Power PlantG.C. Fang, S.D. She, Z.Q. Ye, J. Zhang, L. Wei, Q. Wang, X.Q. Zhang and Y.Y. Ding 661

Analysis of Current Optimization Method on CompensationB. Su, S. Tao, X.N. Xiao and T.C. Wei 665

Analysis of Input Phase for PLL in Dynamic EnvironmentY.X. Feng and H. Bao 669

Analysis of the Energy Metering Problem in Dynamic EnvironmentZ. Wang and H. Bao 673

Characteristics and Analysis of a New Type of Hybrid Compression Energy Storage SystemL.W. Zhang, X.X. Zi and X.J. Huang 677

Development of a New Type of Distribution Network Fault IndicatorF.L. Li, X.L. He and Y. Li 683

Distribution System State Estimation with Phasor Measurement UnitsM. Liu 687

Filtering Methods of GOOSE Messages on Process Level in Smart SubstationsW.C. Wu, Y.H. Ma, Q. Fu and K. Ding 691

Implementation and Optimization of Transmission Line 3d Scene Based on VRF.J. Sun, H.J. Liu and H. Chen 695

Improved LMS Adaptive Algorithm and its Application of Time Delay Estimation in PowerPlantS.P. Zhang, G.Q. Shen and L.S. An 699

Power Transmission Rule Described by Block DiagramY.L. Chen and H. Bao 703

Requirements for the Excitation System in the Development of Units and Grid CoordinationY.Y. Wen, M. Huang, G.P. Liu, Y.M. Liu and K. Zhao 707

Research on Looped Network Operation Scheme and Feasibility of Low-VoltageDistribution NetworkX.J. He, X. Tong, H. Fu, T. Jiang, J. Wu and H. Chen 715

Study on Optimal Location of Multiple-Type Power Quality Improving DevicesT.T. Sun, W.Z. Ma and X.T. Feng 720

The Fault Diagnosis of Electric Power Metering System Based on Momentum BP NeuralNetworkY.Y. Zhang, J.J. Zhao and W. Liang 724

The Optimal Research on Impeller Central Location of Centrifugal FanY.K. Lv, B. Zhang and B. Cheng 729

The Temperature Field Research for Large LNG Cryogenic Storage Tank WallJ.H. Yang and G.S. Yang 733

Typical Insulation Defects Partial Discharge Feature Extraction Research Based on AEMethodF.C. Lv, H. Jin and Z.H. Zhang 737

Applied Mechanics and Materials Vols. 668-669 g

Scheme of Protection and Monitor Underground High-Voltage Power Supply System Basedon PROFINETH.B. Liu and Y.M. Wang 741

Master-Slave Joint Power Flow with Wind Power GeneratorsY.L. Wang and X.F. Zhou 745

Research on the Voltage Influence of Active Distribution Network with DistributedGeneration AccessX.Y. Zhou, L.Y. Wang, W.Y. Liang and L. Zhou 749

Research on Control Strategy for Low-Voltage Looped NetworkH. Fu, X.J. He, X. Tong, Y.W. Tao, P.Q. Lv and T. Jiang 753

Role-Based Services Certification Model of State Grid Unified Application PlatformC. Zhou, Q.M. Li and J. Shi 757

A Design of Different-Frequency Grounding Resistance MeterC.Y. Xu, W. Ai and J.T. Wu 762

Effect of Transmission Tower on Electric Field under Overhead LinesZ.G. Liang, Y.Z. Jiang and Z.J. Liu 767

Design of Power System Key Management InfrastructureR. Zeng, Y. Hua and X.L. Huang 771

Economic Evaluation Methodology of New Energy-Saving Power Transformers andSuggestions for ChallengesX. Tong, H. Fu, X.J. He, L.M. Zhao and T. Jiang 775

Chapter 7: Electronics and Integrated Circuits, Embedded Technologyand Applications

A High Rate Parallel Operation Encryption Card Design Base on FPGAR. Zeng, X.L. Huang and Y.D. Chen 783

A Novel Rectenna Design with DGS Filters for Low-Power Energy TransferS.B. Liu 787

Application of Embedded Technology in Transient Electromagnetic ReceiverW. Liu 791

Application of PLC and RSView32 in Coal Mine Belt Transmission SystemQ.H. Ma, W.L. Sun, S.X. Zeng and W.W. Ge 795

Broadband Transition between Rectangular Waveguide and Substrate IntegratedWaveguide Based on Double Rhombus Antenna ProbeH.Y. Jin and T. Yue 799

Dependence of the Breakdown Voltage of 4H-SiC MESFET’s on the Field Plate and Step-ChannelX.J. Zhang and N. You 803

Design and Application of a Low Frequency VCOH.M. Zhang, Q.P. Wu, Z.Y. Zhou and X. Wang 808

Design and Implementation of a New Drive Circuit of Monolithic Emitter-SwitchingBipolar Transistor (ESBT)D.H. Lin, P. Lou and H.P. Lin 812

Design and Implementation of Colloidal Quantum Dot Field-Effect TransistorsH.Y. Wang, Y.T. Zhang, X.X. Song, L.F. Jin, H.T. Dai, S. Wu and J.Q. Yao 818

Design of Digital Clock Based on SCMS.Q. Qiao, X.Q. Zhang, M. Yang and S.W. Chen 822

Experimental Research of Thermal Effect of Desktop Computer MotherboardM.D. Li, Z.S. Zheng and C. Qiu 826

FPGA Based Frequency Correction of Master Clock Terminals of Whole-View TestSystemsB.L. Luo, Q. Huang, L.Y. Cao, S.G. Yang and X.D. Hu 830

Image Acquisition System Design of Camera Based on FPGAJ.C. Zhu, Y.C. Li, Y.K. Jiao and Z.J. Ma 836

Implementation Method of μC/GUI Chinese Font Base on Embedded SystemX.W. Wang and F.C. Cao 840

h Mechanical Components and Control Engineering III

Improved Design of Microstrip-to-Slotline TransitionY. Zhao, B.L. Hu, C. Deng, H.W. Wang, L. Li and Y. Wang 844

Research on Front Lighting System of AutomobileX.L. Guan, X.X. Xing and Y.M. Lei 848

Research on PZT Phase Modulator Applied in Optical Cable Identification DeviceQ. Sun and G.C. Liu 852

System on Chip Design for Multi-Principle of Relay Protection in the FPGAP.F. Hu, Y.X. Yuan, Z.J. Qu and X.P. Jiang 857

Design of Active Filter Based on MATLABS.H. Xu 862

The WSID Circuit Design Based on ArduinoG. Wang and X.Q. Jia 866

Improvement of the Analog Data Acquisition Accuracy Based on the OversamplingTechnologyC.S. Yang, X. Chen and X.H. Lv 873

The Design of Avionics System Interfaces Emulation and Verification Platform Based onQAR DataY.G. Sun and L. Sun 879

Optimization of Energy-Saving Lighting Line Adjustable ResearchY. Wang and Y.Z. Zhang 884

Chapter 8: Measurements, Testing, Monitoring, Analysis andMethodology

A Novel Approach to Detect the Posture of Excavator’s ManipulatorH.B. Wang, H.L. Zou and R.Z. Zhang 891

A Token Oriented Measurement Method of Source Code SimilarityH.M. Zhu, L. Zhang, W. Sun and Y.X. Sun 899

Construction Machinery Intelligent MonitorS.Q. An 903

Current Detection Method and its Application of an Extension pq TheoryT.C. Wei, S. Tao, B. Su and C. Luo 907

Design and Implementation of Digital Piezoelectric Constant Testing SystemB.Z. Dong and D.H. Li 911

E-Bike Head-Lamp Failure Analysis Based-On Failure Anticipation AnalysisL.X. Wang and W.G. Qiu 916

Fabrication of FBG Strain Gauge Used for High Temperature Strain MonitoringS.J. Zhang and Y.M. Liu 920

Low-Flux Neutron Radiation Detection Technology with High SensitivityY. Liu, Z.N. Xing and G.Z. Zhu 924

Measurement Sensitivity Matrices Kalman Filter with Measurement BiasJ. Pan, W.T. Lou and T.S. Lou 928

Neutron Radiation DetectionZ.N. Xing, Y. Liu, G.Z. Zhu and S.B. Luo 932

Research and Application of S-4800 Scanning Electron Microscope in Modern Testing andAnalysis TechnologyQ. Wen, Z.Y. Ding, F.S. Kou and P. Zhou 936

Research of the High-Precision Dual-Channel Sound Velocity of Seawater MeasurementSystemB.F. Zhang, Z.M. Xie, Z.W. Li and J.C. Zhu 940

Research on Application of Sensor Monitoring Technology Based on the IOT in the CampusGIS Pipeline SystemQ. Zhao, J.P. Feng, T. Li and L. Jin 944

Research on On-Line Monitoring of Transmission Tower StressJ. Wang, Z.X. Liu, Z.Q. Wu and C. Ai 948

The Gyro Random Walk Analysis Based on Allan VarianceX.Y. Dai, Z.G. Chen and X. Xie 953

Applied Mechanics and Materials Vols. 668-669 i

The Influence of Time Truncation on Phase Angle Measurement PrincipleN.N. Chang and H. Bao 957

Transformer Bushing Online Monitoring Method Based on the Method of Relative AngleDifferenceQ. Gao, F. Yuan, Z.N. Guo, Q. Liu, D.T. Zhong, M.J. Wang, P. Li, B. Cai, Z.L. Li, T. Yuan andJ. Zhang 961

Boron Steel Nondestructive Testing Scheme Based on Neutron Radiation DetectionG.Z. Zhu, Y. Liu, Z.N. Xing and S.B. Luo 965

Non-Contact Temperature Measurement by Infrared Pyrometer in High Speed MillingG. Yang, J.Z. Hou, W. Zhou, L. Zhu and H.J. Duan 969

Analysis and Modeling of Uncertain System in Complex EnvironmentJ.H. Li, H.W. Quan and X.J. Zhang 973

Design of Rain Sensor Based on Optical PrincipleH.X. Chen 977

Research on the Attenuation Law of Metal Magnetic Memory Testing SignalY.L. Zhang, Y. Lv, H. Zhang, J.L. Wang, G.J. Zhang and J.X. Zhao 981

The Processing of EFPI Fiber Gas Detection Signal Based on Hilbert-Huang TransformsAlgorithmM.R. Zhou, X. Xie, H. Li and L. Zhang 985

The Study of Four-Position North Seeking System under Vibration EnvironmentM.H. Zong and D.H. Li 990

Water Quality Forecast Based on BP-Artificial Neural Network Model in Qiantang RiverJ.T. Ding and J. He 994

Fan Fault Feature Extraction Based on Wavelet Packet TransformX. Li and P.F. Guo 999

Research on Data Fusion Technology of Body Posture Detection Based on Kalman FilterX.W. Wang and F.C. Cao 1003

Signal Demodulation of High-Temperature LPFG Strain Sensor Based on ArrayedWaveguide GratingS.J. Zhang and Y.M. Liu 1007

GaN Radiation Detection Research Based on Monte Carlo MethodY. Liu, G.Z. Zhu and Z.N. Xing 1011

Thermal Modeling and Compensation of MEMS AccelerometerL. Ma, W.W. Chen, B. Li, Z.G. Chen and Z. You 1015

Chapter 9: Signal and Image Processing, Data Mining andComputational Mathematics

A Behavior Retargeting Algorithm Based on the ModelJ.B. Song, L. Ye and Q. Zhang 1021

A Face Tracking Method Based on Camshift and SCKF in Rapid Moving ProcessF.C. Cao and X.X. Xing 1025

A Method of Features Extraction Based on Fisheye ImageB.F. Zhang, Y.K. Jiao, Z.J. Ma, Y.C. Li and J.C. Zhu 1029

A Novel Image Fusion Method Using Non-Subsampled Shearlet TransformX.X. Xing, F.C. Cao, W.W. Shang and F. Liu 1033

A Stochastic Characterization Based Data Mining Implementation for Airport Arrival andDeparture Delay DataQ. Wu 1037

An Image Retrieval Algorithm Base on Texture FeaturesL.L. Song, Q.H. Wang and Z.L. Pei 1041

An Improved Blind Deconvolution Algorithm of Motion Blurred ImageL. Yang, Z.F. Wang, H.N. Guo, G.S. Liu, H. Wang, L.N. Tang and H.T. Yang 1045

Automatic White Balance Algorithm of Airborne CameraH.N. Guo, Q. Liu, L. Yang, H. Wang, X.D. Zhao and L. Ren 1050

Color Reproduction Experiment of Different Order Polynomial Regression AlgorithmQ. Jia, X.L. Lv, W.D. Xu, J.H. Hu and X.H. Rong 1055

j Mechanical Components and Control Engineering III

Digital Filter Application for Squelch on Industrial Frequency Noise and its HarmonicWaves InterferenceW.J. Wen 1059

Fast Display Algorithm of Large Map File Based on Memory Mapping File TechniqueD.H. Jiang 1064

Inverse Eigenvalue Problem for a Class of Upper Triangular Matrices with Linear RelationZ.B. Li and S. Li 1068

Joint Target Detection Tracking and Classification Based on Finite-Set Statistics TheoryH.W. Quan, J.H. Li and X.J. Zhang 1072

Method Based on Wavelet and Empirical Mode Decomposition for Extracting the GravitySignalL.Y. Zhao 1076

Modal Parameters Identification of Time-Varying System Based on Hilbert-HuangTransformC. Lei, M. Hong and H.Y. Cui 1081

Motion Redirection Based on Markov Chain Monte Carlo Particle FilterJ.B. Song, L. Ye, Q. Zhang and J.P. Chai 1086

Multi-Attribution Classification Based on Lower Integral with Genetic AlgorithmA.X. Chen and J.H. Li 1090

Numerical Method for Solving Variation Problems in Mathematical PhysicsI. Badriev and V. Banderov 1094

Real-Time Unwrapping and Rectification of High-Resolution Catadioptric PanoramicVideo during Non-Stationary MovingJ. Wang, Z.H. Zhang, K.J. Li, H.Y. Shao, T. Xu, S. Hou and L. Zhang 1098

Research and Application of Improved Apriori Algorithm Based on MatrixY. Liu and Y.S. Lou 1102

Research on License Plate Recognition Based on Template Matching MethodH.X. Chen and X.Y. Ding 1106

Signal Compression Reconstruction with Narrow-Band InterferenceY.J. Li, D.J. Xu, X. Wang and Y. Chang 1110

The Analysis Spectrum of Austenite Transformation on Acoustic Emission SignalsH.W. Qin, L.B. Kong and D.M. Liu 1114

The Application of Spline Functions in Wavelet ConstructionX.C. Wang 1118

The Cauchy Problem for Impulsive Transport EquationsG.B. Ye, X.B. Wang and L. Huang 1122

The Research of Speech Emotion Recognition Based on Gaussian Mixture ModelW.L. Zhang, G.X. Li and W. Gao 1126

The Semi-Discrete Finite Element Method for the Cauchy EquationL. Hou, X.Y. Sun and L. Qiu 1130

The Stability of Solution Set to η-Set-Valued Weak Vector Variational Inequality ProblemJ. Jia, S.F. Yin and C.C. Bu 1134

Automatically Collect the Adjectives and Calculate their Sentiment Intensity in theSentiment AnalysisH. Wang, X.H. Ji and J. Ma 1138

Clustering within the Framework of Hesitant Fuzzy SetsY.Z. Wang, Y.J. Zhang and L. Dong 1143

Feature-Weighted Local Support Vector Machine of Particle Swarm OptimizationW.B. Cui, S.M. Mu, C.H. Yin and Q.B. Hao 1147

Video Redirection Parameters Optimization Based on Hierarchical Genetic OptimizationStrategyJ.B. Song, L. Ye, Q. Zhang and J.P. Chai 1152

A Novel Denoising Method Based on Ensemble Empirical Mode Decomposition – PrincipleComponent AnalysisY. Feng, X.D. Huang, J. Chen and R.J. Hong 1157

Progressive Contours Simplification Approach Constrained by Terrain FeatureZ.Q. Yang and H.S. Li 1162

Applied Mechanics and Materials Vols. 668-669 k

Waveform Analysis of a Transmission Line Pulse Generator by Use of Wavelet TransformZ.G. Liang and X. Gu 1166

Tensor Distance Based Least Square Twin Support Tensor MachineH.F. Shi, X.B. Zhao and L. Jing 1170

Water Hazard Detection Based on 3D LIDARH.Y. Shao, Z.H. Zhang, K.J. Li, J. Wang, T. Xu, S. Hou and L. Zhang 1174

Research on a Kind of Quick Background Motion Compensation Algorithm Based onBRISK OperatorY.M. Lei, Z.B. Feng, S.J. Ji and X.X. Xing 1178

Nonlinear Analysis of Coupled Duffing Oscillators Based on Variable Step-Size AdomianDecomposition MethodC. Chen, P.K. Li and X.D. Ping 1182

Chapter 10: Communication, Networks and Information Technologies

3-dB Radiation Beamwidth Adjustment for E-Shaped Microstrip AntennasG. Zhang, C. Gao and Z.B. Weng 1189

A Decentralized Positioning Method for Wireless Sensor NetworksY. Feng and B. Yi 1194

A Method for Ontology Module ExtractH.M. Zhu, L. Zhang and W. Sun 1198

A Method of Automatic Generation of Documents from WSDL to OWL-SL. Zhao, Y.Q. Lan and G.H. Zhang 1202

A Method of Producing Protocol Minimum Complete Test Cases Based on Petri Net ProcessD.Q. Shu, H. Fan and L. Zhang 1208

A Modified DFT-Based Channel Estimator Using Dual-Tree Complex Wavelet Denoisingfor OFDM Systems with Null CarriersW.C. Liu, Y.A. Liu, K.M. Liu and Y.M. Guo 1215

A Self-Healing Connectivity Recovery Algorithm in Wireless Sensor-Actor NetworksL. Yao, D.D. Xu, J. Zhou and J.L. Du 1219

A Study on Energy Optimum Algorithm of LEACH under Three-Dimensional SpaceY. Qian 1223

A Universal Satellite Simulator Based on Software Radio TechnologyH.S. Jin, X.L. Lu and S.L. Liu 1227

Algorithm Design of the p-Cycle Protection Applied to SDN Based on OFDM TransmissionD.Z. Zhao, X.M. Li and S. Liu 1231

An IPTV Recommendation Method Based on Latent ContextW.M. Guo and L. Sun 1237

Compression Used in Qubits DistillationF.Z. Li, B. Zhong, L. Cao, C.Z. Wang, Z.D. Jiang and W.Y. Liu 1243

Deployment and Exploration of Domain Name System Based on IPv6H.C. Tian and H. Wang 1247

Design of a Wideband Vivaldi Antenna ArrayB. Zhang 1253

Design of Secure Cloud Storage System for Enterprise Information ResourcesJ. Zuo, Z. Zhu and J.Y. Wang 1257

Designing Parking Guidance Information System Based on Internet of ThingsZ. Zhang, Y.C. Hu, C.C. Zhang and Y. Chen 1263

Implementation of QC-LDPC Decoder Based on FPGA for FSO SystemY.G. Qiong and Z.M. Hua 1269

Joint Scheduling and Precoding Based on SLNR Criteria in MU-MIMO SystemY. Liu, J.X. Wang, P. Wang and R.K. Yu 1273

Multi-Courses of General Exam System Based on MASL.P. Yang, D.W. Xu and W. Wang 1278

Optimization of Block Size for Reconciliation ProtocolL. Cao, W.Y. Liu, B. Zhong, F.Z. Li, C.Z. Wang and Z.D. Jiang 1282

l Mechanical Components and Control Engineering III

Performance Analysis of Anti-Follower Jamming in FH/MFSK Communication SystemX.L. Ma, Y.B. Yan and Y.C. Wang 1286

Research on Comprehensive Evaluation for Synergistic Effects of Internet of ThingsIndustry Chain Based on Value NetP.F. Fan, R. Zhu, J.Y. Zhu and T.T. Lin 1290

Research on Information Retrieval System of Typhoon Based on ArcGIS ServerS.Y. Chen, H.H. Wang, Y.L. Xiang and Q. Chen 1297

Research on Simulation of Satellite MPLS Network in OPNETF.X. Deng, S. Hu, J.X. Zhang, S.Y. Zhang, J. Wu and H. Jiang 1306

Tentative Plan of Application of the Mobile Internet of Things in Mountain DisasterEmergency Communication SystemZ.Y. Shi, H. Han, S.P. Yin and Q.Y. Xu 1310

The Design and Implementation of a Heterogeneous Multi-Core Security Chip ArchitectureBased on Shared Memory SystemL. Zhang, R.P. Dong, C. Zhang and Y.P. Yu 1314

The Design of the Clusters Real-Time Positioning System Based on RSSIX. Zhu, Y.L. Zhang and Y.B. Ke 1319

The Mobility Solutions of IPv6-Based NetworkX.D. Zhang and Y. Ma 1323

The Modeling and Solutions of the ‘Adaptive Living’ Based on Network CalculusS. Wang, L. Zhu and Y.D. Chen 1327

The Origin and Development of Data Mining with Large DataH.Y. Ma and G.Y. Zhang 1331

The Study on Non-Line-of-Sight Ultraviolet Communication System in the AtmosphericTurbulenceY. Wang 1335

The Survey for IP TracebackH.C. Tian and J.A. Lin 1339

Design and Implementation of a CAD Software System for Hull LinesW. Zhang and Z. Wang 1343

Multi-User Detection Based on Quasi-Synchronous CDMA SystemsL. Yang, J. Cheng, X.X. Ge, N.R. Liang and W.C. Lei 1347

The Application of Communication between SLC500 PLC and Profibus-DP FieldbusS.T. Li, W. Jiang and H.Y. Qi 1351

A Distributed Algorithm for Data Collection in Low-Duty-Cycled WSNsF. Liu, Y.F. Wang and M. Lin 1355

An Improved Bounding Box Localization Algorithm Based on Optimum Node SelectionK.G. Qian, Y.J. Wang, X.M. Li and Z.C. Dai 1359

Live Migration for Virtual Machine Based on Kalman Prediction of Dirty PagesZ.H. Sun and X.L. Hu 1363

Realization of SMS4 Algorithm Based on Share Memory of the Heterogeneous Multi-CorePassword Chip SystemL. Zhang, R.P. Dong and Y.P. Yu 1368

Design of Marine Data Warehouse ETL SystemW.J. Wen 1374

Research on the Incremental Updating Mechanism of Marine Environmental DataWarehouseW.J. Wen 1378

Research on the System of Image Acquisition and Wireless TransmissionJ. Xiong, Y. Pan, Z.Y. Hou and R. Zhang 1382

The Performance Analysis of Two Conventional Linear Pre-Coding Schemes in MassiveMIMO System with Imperfect CSITR.K. Yu, J.X. Wang, Y.M. Sun and Y. Liu 1386

Performance Evaluation of Near Space System for Information Process Based onMultilayer Gray ModelJ.X. Wang, F. Yang and Q. Pan 1391

The Central Forwarding Mechanism of Residential GatewayH.C. Tian and J.K. Ma 1395

Applied Mechanics and Materials Vols. 668-669 m

Study on Intelligent Augmented Reality Tourist Guide Application Based on AndroidSmart PhoneY.H. Yu 1399

Decoupling Replication from the Producer Consumer Problem in Internet QoSJ. Li and Z.F. Teng 1403

Apply Emotional Tendency Analysis to Sina MicroblogZ. Qiu and L.L. Zhou 1407

Chapter 11: Construction Technologies, Urban Planning and UrbanTraffic

Application of Gustav in Entertainment Places Fire Risk AssessmentY.T. Zhao and J. Wang 1413

Investigation on Design of Axially Compressive Members by Components of Masonry andConcrete in Architectural EngineeringD.F. An 1417

Separation Method of Strain Caused by Concrete Shrinkage and Creep in Bridge HealthMonitoringY.F. Gong, X.B. Sun, X.H. Li and Y.B. Jiao 1421

The Regular Pattern Analysis on the Temperature Stress of Reinforced Concrete BeamsStrengthened with Carbon FiberY.M. Chen, S. Tian, Y.T. Yan and G.B. Li 1426

The Study of Siltation State Assessment Method of Urban Sewer Network Based on theInternet of ThingsC.Q. Jiang, R.Y. Wang, F.X. Chen and Z. Wang 1430

MEPDG Analysis on Relationship between Design Inputs and Performance of AsphaltPavementsH.B. Zhang, J. Hou, Y. Liu, D.F. Xuan and W.M. Fan 1434

Curing Mechanism of C-Type Firming Agent Stabilized Sludges through SEM and FTIRMicroscopic AnalysisM.L. Li, Y. Liu and Z.H. Wang 1438

Research on the Quantitative Technical Index of Combining Horizontal and VerticalCurves of ExpresswayZ.L. Huang and K.M. Chen 1442

Study of Tidal Lanes on Traffic Controlling - Taking Zizhuyuan Road of Haidian District inBeijing as an ExampleJ.X. Wang, D. Liu, Y. Zhao and C. Wang 1449

Driving Behavior Parameter Sensitivity Analysis Based on VISSIMW.W. Liu, Y. Qin, H.H. Dong and Y.F. Yang 1453

An Optimization Model for Dynamic Speed Control in Urban Freeway NetworksZ.H. Zhang, D.Z. Sun, J.P. Lv, J. Sai and M. Faruqi 1458

The Application of Speed Warning on Highway Using Anti-Dazzle Panel Based onPersistence of Vision EffectJ. Liu and Y. Ogata 1462

Effects of Information Technology on Rural Economic Development from the Perspective ofSmart CityL.J. Wang, P.N. Ruan and S. Li 1466

Research on Information Demand and Publishing Framework about Public InfrequentEvents Based on Residents FeatureL.S. Sun, J. Qiao, W. Luo and L. Sun 1470

Development of a Microscopic Simulation Based Performance Evaluation Model toCompare Operational Improvements with Capacity AdditionsT. Tang, D.Z. Sun and V. Govindankutty 1476

Study of Intercity Travel Based on GIS Spatial AnalysisZ.H. Mou, M.L. Li and D.X. Cui 1480

Development of an Embedded Discrete Fracture Model for Multi-Phase Flow in FracturedReservoirF.Q. Zhou 1488

n Mechanical Components and Control Engineering III

Adaptive Mesh Refinement for 2D Non-Isothermal Three-Phase Flows in Porous MediaComprised of Different Rock TypesY.X. Ding 1493

Chapter 12: Earth Science and Environmental Engineering

Aeolian Sand Size on the Surface of the Northern Foothill of Yinshan MountainH.T. Jiang, C.R. Guo, C.X. Hai, J.X. Liu, Y.H. Xie and S.S. Sun 1499

Estimation of Geophysical Properties of Sandstone Reservoir Based on HybridDimensionality Reduction with Elman Neural NetworksG.J. Cheng, J.J. Yin, N. Liu, X.J. Qiang and Y. Liu 1509

Research on the Water Safety Early Warning for Rural Safe Drinking Water Projects inQingdaoL. Jin, Y.W. Li and Q.G. Li 1513

Study of Aircraft Carbon Dioxide Emission StandardsG.H. Yan and S.X. Ma 1517

The Production Status and Treatment for Rural Solid Waste in Hainan ProvinceS.Q. Zhao, H.Z. Ma, F.Y. Zhang and Q.H. Wang 1521

The Reconstruction of Lead Contamination History Using Tree Ring, Jinan, ChinaW.D. Gao, W. Jiang, X.J. Wang, Z. Min and T.Q. Xiong 1526

The Wind-Sand Flux Structure of Grassland on the Northern Foot of Yinshan MountainH.T. Jiang, C.R. Guo, C.X. Hai, S.S. Sun, Y.H. Xie and J.X. Liu 1530

The Analysis on Environmental Protection, Energy Saving and Green Design ofAgricultural MachineryQ. Sun, Z.L. Li, H. Yu and J.S. Zhang 1538

Disaster Mitigation Based on Natural Disaster Chain Structural ModelM. Hu 1542

Beier Depression Petroleum System Study in HailaerJ.Y. Wang, S.M. Shi and X.L. Du 1546

Study on the Key Environmental Factors Aspergillus flavus Growth and AflatoxinProductionC.S. Zhang, Q. Zhao, J.X. Feng, J. Sun, L.N. Yu, J. Bi, X.J. Fu, Y.A. Gao and Q.L. Yang 1550

Chapter 13: Biomedical Engineering

An Initial Investigation of Hip Joint Contact Behaviour Using Advanced Non-Linear FiniteElement MethodsW. Li, S. Wayte, D. Griffin, D. Chetwynd, D. Karampela, E. Torabi and K. Mao 1557

Analysis of the Expansion Behavior and In-Stent Restenosis of Coronary by Finite ElementMethodX.D. Jiang, X.Y. Teng and D.Y. Shi 1561

Analysis on Refractive Property of Complex Optometry SystemJ.Y. Zhang, W.L. Liu, L. Yang and M.L. Gao 1565

Gait Trajectory Planning Based on Least Squares Fitting - Polynomial for Lower ExtremityRehabilitationF.C. Cao and L.M. Du 1569

Preparation and Antioxidant Activities of Peanut (Arachin conarachin L.) Protein Peptidesby Lactobacillus Solid State Fermentation MethodL.N. Yu, Q.L. Yang, J.X. Feng, J. Sun, J. Bi and C.S. Zhang 1573

The Extraction of Peanut Protein Peptone Hydrolysate from Cold Pressed Peanut Meal byPapainC.S. Zhang, Q. Zhao, L. Tang, R.J. Li, J. Sun, L.N. Yu, J. Bi, Q.L. Yang, Y.A. Gao and J.X. Feng 1577

The Value of Ultrasonography Screening Trisomy 21 during the Second and ThirdTrimesters of GestationY.P. Pan 1581

Applied Mechanics and Materials Vols. 668-669 o

Chapter 14: Product Design, Planning, Projects Management andIndustrial Engineering

A Multi-Retailer Decentralized Supply Chain Coordination Based on Revenue-SharingContractsJ.Y. Ren, Y.X. Liu and P.F. Zeng 1587

Application of Fractal Theory in Supply Chain Requirements ForecastH. Xu and Z. Ming 1591

Case Analysis of CNC Grinder by Comprehensive Optimization Based on Entropy Weightof Reliability Evaluation ModelY. Teng and Y.P. Cun 1597

Comprehensive Evaluation of Thermal Power Units Based on Nonlinear PrincipalComponent AnalysisL.Q. Shang and S.P. Wang 1601

Control of Production Cost Based on Grey Correlation Degree in Wulongquan MineL.H. Ke, Y. Liu and Y.C. Ye 1605

Comprehensive Optimization Based on Entropy Weight of Electromechanical ProductReliability Evaluation ModelY.P. Cun, Y. Teng and H.L. Sun 1611

Dynamic Pricing Strategy and Optimal Resource Selection Strategy Based on CredibilityModelY. Yang, H. Zhou, J.H. Liu and Y. Feng 1615

Emergency Dynamic Alliance Partner Selection Based on Adaptive Genetic AlgorithmM. Hu 1621

Process Quality Evaluation Based on Maximum Entropy PrincipleY.H. Wang, C.L. Zhang, W. Dai and Y. Zhao 1625

Virtual Machining Environment Construction in Vericut for Process PlanningX.M. Huang, L.H. Zhao and Y.X. Tong 1629

Research on Joint Optimization of Level of Repair Analysis and Spare Parts StocksL. Xu, Q.M. Li and H. Li 1633

Research on the Supply Chain Performance Appraisal System Based on BalancedScorecardD.K. Jiang and M.Z. Ma 1637

Robust Single Machine Scheduling with Stochastic Processing Times Based on Event PointX.X. He, C. Yao and Q.H. Tang 1641

Safety Assessment for CNG Vehicle Energy Storage-Supply SystemD.H. Chen and C.S. Fu 1646

Study on the Product CAPP-PPC Process Based on ProductibilityY.H. Chen, H.F. Li, J. Xu, F.S. Qiu and G.D. Wang 1651

The Research of Market Risk Identification for Product Development and Design with theIndustrial Design Innovation Promote the Economic Development of AgriculturalMachinery Manufacturing IndustryQ. Song and K. Su 1655

Catia Template Design of Auto Rear AxleZ.X. Yang and G. Yang 1659

Empirical Research on Logistics Engineering Based on AHP and Entropy MethodY.R. Zhang and W.F. Cao 1663

Exploration and Evaluation of Tourism Resources Engineering for XingWen Geo-ParkY.L. Wei, S.L. Guo, S. Zhao and D.X. Li 1667

Modelling of Shaft Part Information Based on Domain OntologyX.B. Liu, X.B. Wang, C.N. Li and L. Jiao 1671

NX-Based Parametric Design of Precision Molding MachineB. Wang, W.D. Hui and J. Zhang 1675

Experimental Study on the Density of Fish Feed PelletsX. Song, Y.C. Li, Z.S. Wan and S.S. Zheng 1679

p Mechanical Components and Control Engineering III

The Experimental Research of the Application of Liquid-Box Self-Circulation EvaporativeCooling System in Electronic ComponentsR. Cao, L. Ruan, B. Xiong, H.H. Dong and S.Q. Guo 1683

Analyzing and Modeling for Liquid Cargo Handling of LNG SimulatorJ.H. Cao and X. Zou 1687