The Milwaukee photometers ensure excellentrepeatability and measure: pH, free & total chlorine, iron, ammonia and phosphate. This lineof user-friendly photometers will give you directreadings in mg/L.

Mi405: instrument for ammonia measurement: - range: 0.00 to 9.99 mg/L (NH3-N)- accuracy: ±0.10 mg/L@5.00 mg/L

Mi408: instrument for iron measurement: - range: 0.00 to 5.00 mg/L (Iron)- accuracy: ±0.03 mg/L @1.50 mg/L

Mi412: instrument for phosphate measurement: - range: 0.00 to 2.50 mg/L PO4- accuracy: ±0.04 mg/L @1.00 mg/L

Each photometer is supplied in a hard carryingcase, complete with reagents for 100 tests.

Mi405/Mi408/Mi412 Iron, Ammonia and Phosphate Photometers

Salinity RefractometerMA887The MA887 is an optical instrumentthat employs the measurement of therefractive index to determine the salinityof natural and artificial seawater, oceanwater or brackish intermediates.The digital refractometer eliminates the uncertaintyassociated with mechanical refractometers and is easi-ly portable for ship, shore or home use.

Milwaukee offers a widerange of calibration, mainte-nance & cleaning solutions,necessary for the correct useof your electrodes and probes.

Milwaukee standard solutions are avail-able in 230 mL bottles or 20 mL sachets.

Solutions & ReagentsCalibration, Maintenance &Cleaning

Wide Range ofPROFESSIONAL INSTRUMENTS

for Fresh & Salt Water Aquarium

Authorized Dealer:

TH300 TH310Range -50.0 to 150.0°C -50.0 to 150.0°CResolution 0.1°C 0.1°CAccuracy ±0.5°C ±°0.5CTypical EMC ±0.3°C ±0.3°CDeviationProbe Stainless steel with 1 m cable Stainless steelSwitch On/Off no yesCalibration no yescheckEnvironment 0 to 50°C; max RH 95% 0 to 50°C; max RH 95%Battery type 1 x 1.4V 1 x 1.5VBattery life 1 year approx. approx. 3000 hours of

continuous useDimensions 106 x 58 x 19 mm 66 x 50 x 25 mmWeight 70 g 50 g

Mi405 Mi408 Mi412Ammonia Iron Phosphate

Range 0.00 to 9.99 mg/L 0.00 to 5.00 mg/L Fe 0.00 to 2.50 mg/LResolution 0.01 mg/L 0.01 mg/L 0.01 mg/LAccuracy ±0.10 mg/L ±0.03 mg/L ±0.04 mg/LLight source Blue Led 466 nm tungsten lamp tungsten lampEnvironment 0 to 50°C 0 to 50°C 0 to 50°C

max RH 95% max RH 95% max RH 95%Battery type 1 x 9V (included) 1 x 9V (included) 1 x 9V (included)Auto-off after 10’ of non-use after 10’ of non-use after 10’ of non-use

Solutions and reagentsMA9015 Storage solution for pH electrodes (230 mL)MA9020 200-275 mV ORP solution (230 mL)MA9070 Zero oxygen solution (230 mL) M10004B pH 4.01 buffer solution (box of 25 x 20 mL sachet)M10007B pH 7.01 buffer solution (box of 25 x 20 mL sachet)M10010B pH 10.01 buffer solution (box of 25 x 20 mL sachet)M10016B Cleaning solution for electrodes (box of 25x20 ml sachet)M10030B 12880 µS/m Conductivity calibration solution (box of 25x20 ml sachet)M10031B 1.413 µS/cm conductivity calibration solution (box of 25 x 20 mL sachet)M10032B 1332 ppm TDS Calibration solution (box of 25x20 ml sachet)M10038B 6.44 ppt TDS Calibration solution (box of 25x20 ml sachet)2720116 Reagent kit for 25 tests (Free Chlorine - MW10)2720216 Reagent kit for 25 tests (Total Chlorine - MW11)2720115 Reagent kit for 25 tests (Phosphate - MW12)2720316 Reagent kit for 25 tests (Iodine - MW13)2720416 Reagent kit for 25 tests (Iron - MW14)Mi505-100 Ammonia MR regent (100 tests)Mi508-100 Iron HR reagent set for 100 testsMi512-100 Phosphate LR reagent set for 100 tests

pH Electrodes & Probesfor the Aquarium marketMilwaukee has a wide range of pH,ORP, conductivity and tempera-ture electrodes & probes to meetthe need of any aquariumapplication.

Glass-body or Epoxy-bodyelectrodes are supplied with BNCconnector and a length cableuntil 3 meters; conductivityprobes are supplied with DINconnector.

Range Resolution Accuracy

MA887 0 to 50 PSU 0 PSU ±2 PSU0 to 150 ppt 1 ppt ±2 ppt1.000 to 1.114 S.G. 0.001 S.G. ±0.002 S.G.0 to 80°C 0.1°C ±0.3°C

Electrodes, probes and accessoriesMA840 Polarographic D.O. probe with 3 m cable MA911B/2 Double junction, gel filled pH electrode

with BNC connector and 2 m cableMA821B/2 Double junction, gel filled ORP electrode

with BNC connector and 2 m cableMi56P Replaceable pH electrode (pH55)Mi59P Replaceable conductivity probe (EC59/EC60)SE220 Double junction pH electrode with 1 m cable and gel

filled electrolyte solution (MW101, MW102)SE300 Double junction ORP platinum electrode with 1 meter

cable and gel filled electrolyte solution (MW500)SE600 Combination probe for pH/EC/TDS with 1 meter

cable for MW801

www.milwaukeeinst.com

MC510ORP ControllerEvery Aquarium needs individualattention. This is why the MC510has a user selectable set point forthe ORP (0 to 600 mV). Simply plug theozone generator into the controller’s powerplug and it will dose until the mV set pointis reached. The ozone generator will automatically switch on againif the ORP goes above or below the adjusted set point.

MC510Range ±1000 mVResolution 1 mVAccuracy (@25°C) ±5 mVSet point range 0 to 600 mVAlarm active when reading is higher

or lower than selected set point Electrode MA921B/2 (included)Environment 0 to 50°C; max RH 95%Power supply 12 VDC (included)Dimensions 148,5 x 82,5 x 32 mmWeight 180 g

MW10/MW11/MW12/MW13/MW14Low cost digital handy photometersPhosphates are present in natural waters and at concentrations typically found, do not pose anyspecific health threats to humans. However,excessive contamination of water courses fromagricultural fertilizer run off or wastewater/efflu-ent discharge can promote excessive algae orplant growth. Milwaukee offers MW12 with arange of 0.00 to 2.50 mg/L.

MW10 (Free Cl2) MW11 (Total Cl2)

Range 0.00 to 2.50 ppm 0.00 to 3.50 ppmResolution 0.01 ppm 0.01 ppmAccuracy (@25°C) ±0.03 ppm ±0.03 ppmLight source Light emitting diode Light emitting diodeLight detector Silicon photocell Silicon PhotocellBattery type 1x1.5V AAA 1x1.5V AAAAuto-off after 2 minutes after 2 minutesDimensions 81.5 x 61 x 37.5 mm 81.5 x 61 x 37.5 mmWeight 64 g 64 g

MA955Solenoid valve for CO2 dosingThe solenoid valve is an acces-sory for the MC122 and theMC125 to automate your dosingof CO2 and makes sure that theplants of your aquarium are alwayshealthy.

MA955, solenoid valve, is suppliedwith 1.5 m cable.

pH

ORP

Conductivity

Dissolved Oxygen

Temperature

Salinity

Ammonia

Free Chlorine

Total Chlorine

Phospate

Iron

Lux

www.milwaukeeinst.com

MW12 (PO4) MW13 (I) MW14 (Fe)

Range 0.00 to 2.50 ppm 0.0 to 12.5 ppm 0.00 to 5.00 ppmResolution 0.01 ppm 0.1 ppm 0.01 ppmAccuracy (@25°C) ±0.04 ppm ±0.1 ppm ±0.04 ppmLight source Light emitting diode Light emitting diode Light emitting diodeLight detector Silicon photocell Silicon Photocell Silicon photocellBattery type 1x1.5V AAA 1x1.5V AAA 1x1.5V AAAAuto-off after 2 minutes after 2 minutes after 2 minutesDimensions 81.5 x 61 x 37.5 mm 81.5 x 61 x 37.5 mm 81.5 x 61 x 37.5 mmWeight 64 g 64 g 64 g

TH300/TH310 Pocket-sized thermometersTH310 is a palm-sized, highly accurate thermome-ter that is designed to make glass thermometersobsolete.Remote temperature measurements require a ver-satile thermometer with a remote probe that can beused in a hard-to-reach places. The TH300 isequipped with a stainless steel general purposeprobe and 1 meter cable to make remote reading asimple task.

EC59/EC60Pocket size EC/TDS/Temp Meters

Milwaukee’s Standard meters are manufac-tured to be easy to use, practical and accu-rate.

MW101 performs pH measurements with a0.01 pH resolution and with manual temper-ature compensation.

The meters are supplied with pH electrode and calibration solutions.

MW301/MW401/MW402Portable EC/TDS Meters

This meter allows you to measure pH, ECand TDS with just one instrument and onesingle probe!

MW801 with a Conductivity range that goesup to 1990 µS/cm and TDS range that goesup to 1990 ppm. Supplied with the MA850 interchangeableprobe to measure pH, Conductivity and TDS.

MW600Portable Dissolved Oxygen Meter

MC120Smart pH Monitor

pH600-AQEconomical pH Tester

CD600/CD601/CD610Economical EC/TDS Pocket Testers

The pH600-AQ is a pH tester specifically designed forthe aquarium market and can be used both in fresh andsalt water.

The calibration procedure is very simple and fast.This tester has 1 point manual calibration, ±0.1 pH accuracy and a range of 0.0 to 14.0 pH.

The pH600-AQ is supplied in a blister packagingcomplete with calibration screwdriver, batteries andinstructions.

The CD600 and CD610 TDS testers are specificallydesigned to measure salinity in the koi pond market. Thecalibration procedure is very simple and fast. Suppliedcomplete with protective cap, calibration screwdriver,batteries and instructions.

The CD601 is a Conductivity tester specifically designedto measure EC values in fresh water aquariums. Thistester has automatic temperature compensation, 10µS/cm resolution and a range of 0 to 1990 µS/cm.CD601 is supplied complete with protective cap, calibra-tion screwdriver, batteries and instructions.

The pH55 is a waterproof pH and temperature testerwith 1 or 2 points automatic calibration, a range of -2.0 to 16.0 pH and of -5.0 to 60.0°C and ±0.1 pHaccuracy.The modular design of these testers allows easy elec-trode and battery replacement.

pH55Pocket size pH & Temperature Meterwith replaceable electrode

MW301 is a Conductivity Portable Meter, withAutomatic Temperature Compensation, has arange of 0 to 1990 µS/cm with a 10 µS/cm reso-lution. MW401 is a TDS Portable Meter, with AutomaticTemperature Compensation, has a range of 0 to1990 mg/L (ppm) with a 10 mg/L resolution; MW402 is a TDS Portable Meter, with AutomaticTemperature Compensation, has a range of 0.0to 10.0 g/L (ppt) with a 0.1 g/L resolution;The meters are supplied complete with probewith 1 meter cable and calibration solution.

MW500 performs ORP measurements with arange of ±1000 mV. The meter is supplied withORP electrode and calibration solutions.

MW500 is supplied complete with a SE300 pla-tinum electrode, 9V battery and instructions. MW801

Range pH 0.0 to 14.0 pHEC/TDS 0 to 1990 µS/cm; 0 to 1990 ppm

Resolution pH 0.1 pHEC/TDS 10 µS/cm; 10 ppm

Accuracy pH ± 0.2 pH(@20°C) EC/TDS ±2% full scaleConversion factor 0.5Calibration manual, 1 pointTemperature compensation automatic, 0 to 50°C / 32 to 122°FProbe SE600, combination pH/EC/TDS probe (included)Environment 0 to 50°C; max RH 95%Battery type 1 x 9V (included)Battery life approx. 150 hours of continuous use

MC120Range 0.0 to 14.0 pHResolution 0.1 pHAccuracy (@25°C) ±0.2 pHSet point range 5.5 to 9.5 pHAlarm active when reading is higher

or lower than selected set pointpH electrode MA911B/2 (included)Environment 0 to 50°C; max RH 95%Power supply 12 VDC (included)

MW700-WPRange 0-1999 Lux;

2000-19999 Lux; 20000-50000 Lux

Resolution 1 Lux; 10 Lux; 100 Lux Accuracy ±6% full scaleEnvironment 0 to 50°C / 32 to 122°F; max RH 95%Battery type 1 x 9V (included)Battery life approx. 150 hours of continuous useAuto-off after 5 min. of non-use

MW500Range ORP ±1000 mVResolution ORP 1 mVAccuracy (@25°C) ORP ±5 mVORP electrode SE220 (included)Environment 0 to 50°C / 32 to 122°F;

max RH 95%Battery type 1 x 9V (included) Battery life approx. 300 hours of use

pH55Range pH -2.0 to 16.0 pH

Temp -5.0 to 60.0°C / 23.0 to 140.0°FResolution pH 0.1 pH

Temp 0.1°C / 0.1°FAccuracy pH ±0.1 pH(@25°C) Temp ±1°C / ±2°FCalibration automatic, 1 or 2 points Temp. compensation automaticpH electrode Mi56P (replaceable)Environment -5 to 50°C / 32 to 122°F

max RH 100%Battery type 4 x 1.5V (included)Battery life approx. 300 hours of use

MW101Range pH 0.00 to 14.00 pH

Resolution pH 0.01 pH

Accuracy pH ±0.02 pHTemperature manual, Compensation 0 to 50°C / 32°F to 122°FCalibration manual, 2 pointspH Electrode SE220 (included)Environment 0 to 50°C; max RH 95%Battery type 1 x 9V (included) Battery life approx. 300 hours of use

pH600-AQRange 0.0 to 14.0 pHResolution 0.1 pHAccuracy ±0.1 pHCalibration manual, 1 pointEnvironment 0 to 50°C / 32 to 122°F;

max RH 95%Battery type 3 x 1.5V (included)Battery life approx. 700 hours

of continuous use

MW801Portable pH/EC/TDS Meter

MC122Range 0.0 to 14.0 pHResolution 0.1 pHAccuracy (@25°C) ±0.2 pHSet point range 5.5 to 9.5 pHAlarm active when reading is higher

or lower than set pointDosing contact 1 power plug for CO2 dosingpH electrode MA911B/2 (included)Environment 0 to 50°C; max RH 95%Power supply 12 VDC (included)

Dissolved Oxygen measurements are veryimportant in fish farms and ponds, whereOxygen levels are continuously monitoredto obtain optimal reproduction.

The MW600 calibrates easily in 2 points (at100% saturated air and in 0 Oxygen solution)and has Automatic TemperatureCompensation which guarantees the high-est accuracy. The low battery warning, easyto replace screw on cap membranes makethis meter very simple to operate.

MW600Range O2 0.0 to 19.9 mg/lResolution O2 0.1 mg/lAccuracy (@25°C) O2 ±1.5% full scaleCalibration manual, 2 pointsTemperature compensation automatic, from 0 to 30°CProbe MA840 (included)Environment 0 to 50°C; max RH 95%Battery type 1 x 9V (included)Battery life approx. 70 hours of use

The MC120 smart pH monitorsallow you to continuosly monitorpH values directly in your aqua-rium. Features include: user selec-table set point, visual Led alarmwhen values go above orbelow the set point and manual calibration.Powered by a 12 VDC adapter allsmart monitors are supplied with a clog-resistant pH electrode.

MW500Smart ORP Portable Meter

MW101Portable pH/Temperature Meter

The MW700-WP is a portable Lux meter designed to performlight measurements. The instrument is supplied in a cartonbox complete with a light sensor connected to themeter that measures from 0 to 50000Lux.

The light sensor is waterproof, suit-able to verify the light intensity also atthe bottom of your aquarium. Lux is aunit that indicates the density of lightthat falls on a surface. The accuracyis ±6% of reading (full scale).

Plants require CO2during the day

when the lightsare on and O2 atnight for respira-

tion.

The MC122 pH controller enables you to auto-mate your dosing of CO2 and makes sure that theplants of your aquarium are always healthy. The meters are supplied with a plug socket toconnect the solenoid valve.

CD601 CD600 CD610Range 0 to 1990 µS/cm 0 to 1990 ppm 0 to 10000 ppmResolution 10 µS/cm 10 ppm 100 ppmAccuracy ±2% full scale ±2% full scale ±2% full scaleTemperature automatic automatic automaticcompensation from 5 to 50°C from 5 to 50°C from 5 to 50°CEnvironment 0 to 50°C 0 to 50°C 0 to 50°C

max RH 95% max RH 95% max RH 95%Battery type 4 x 1.5V (included) 4 x 1.5V (included) 4 x 1.5V (included)Battery life approx. 350 hours approx. 350 hours approx. 350 hours

of continuous use of continuous use of continuous use

MW301 MW401 MW402Range 0 to 1990 µS/cm 0 to 1990 ppm 0.0 to 10.0 pptResolution 10 µS/cm 10 ppm 0.1 pptAccuracy ±2% full scale ±2% full scale ±2% full scaleProbe SE510 (included) SE510 (included) SE520 (included)Temperature automatic, automatic, automatic,compensation 0 to 50°C 0 to 50°C 0 to 50°CEnvironment 0 to 50°C 0 to 50°C 0 to 50°C

max RH 95% max RH 95% max RH 95%Battery type 1 x 9V (included) 1 x 9V (included) 1 x 9V (included)Battery life approx. 300 hours approx. 300 hours approx. 300 hours

of continuous use of continuous use of continuous use

EC59 EC60Range 3999 µS/cm, 2000 ppm, 20.00mS/cm, 10.00 ppt

0.0 to 60.0°C 0.0 to 60.0°CResolution 1 µS/cm, 1 ppm, 0.1°C 0.01 mS/cm, 0.01 ppt, 0.1°CAccuracy ±2% full scale, ±0.5°C ±2% full scale, ±0.5°CTemperature automatic, automatic,Compensation with β=0.0 to 2.4%/°C with β=0.0 to 2.4%/°CCalibration automatic, 1 point automatic, 1 pointProbe Mi59P (replaceable) Mi59P (replaceable)Environment 0 to 50°C / 32 to 122°F; 0 to 50°C / 32 to 122°F;

max RH 100% max RH 100%Battery type 4 x 1.5V (included) 4 x 1.5V (included)Battery life approx. 100 hours approx. 100 hours

of continuous use of continuous use

These new waterproof pocket size EC/TDS/Temp Metersinclude features such as a replaceable probe, temperaturein °C or °F, automatic temperature compensation, batterylevel indicator, stability indicator, automatic shut-off andautomatic calibration all in a floating waterproof casing.

EC59 and EC60 are ideal for fresh water aquariums and tomeasure salinity in the ponds.

MW700-WPPortable Lux Meter with Waterproof Probe

MC122Smart pH/CO2 Controller