MATERIALS / PRODUCTS - sac-accreditation.gov.sg · materials / products tested tests / properties...

SGS Testing & Control Services Singapore Pte Ltd Certificate No. : LA-2012-0506-A Oil, Gas & Chemicals Laboratory 1 Seraya Avenue Issue No. : 22 Jurong Island Singapore 628208 Date : 02 January 2018

Page : 1 of 28

FIELD OF TESTING : Chemical and Biological Testing

MATERIALS / PRODUCTS TESTED

TESTS / PROPERTIES STANDARD METHODS /

TECHNIQUES / EQUIPMENT

A. PETROCHEMICAL I TOLUENE, XYLENE, 1. Acidity ASTM D847-16 BENZENE 2. Acid Wash Colour ASTM D848-14 3. Copper Corrosion ASTM D849-15 4. Distillation ASTM D850-16; ASTM D1078-11; IP 195/98(09) BS 2000:Part 195:1998 5. H2S and SO2 (Qualitative) ASTM D853-04 6. Color Platinum - Cobalt Scale ASTM D1209-05(2011) 7. Density/Specific Gravity ASTM D4052-16 8. Water by Karl Fischer ASTM E1064-16 ASTM E203-16 9. Color Saybolt ASTM D156-15 ASTM D6045-12(2017) 10. Flash Point IP 170/09; ISO 13736:2013 BS 2000 : Part 170(2008) BS EN ISO13736:2013; ASTM D56-16a 11. Copper Corrosion ASTM D130-12; IP 154/2000 BS 2000: Part 154:1999; BS EN ISO2160:1998; ISO 2160:1998

Certificate No. : LA-2012-0506-A Issue No. : 22 Date : 02 January 2018 Page : 2 of 28




12. Solidification Point ASTM D852-16 13. Non-aromatic hydrocarbons ASTM D2360-11 14. Purity of Benzene, non- ASTM D4492-10 aromatic, aromatic impurities in benzene 15. Total Sulphur ASTM D5453-16e1; ASTM D3120-08(2014) 16. Bromine Index ASTM D2710-09(2013) ASTM D1492-13

17. Nitrogen Content ASTM D4629-12(2017); IP379/88(01)

18. Chloride, Organic ASTM D5808-09a(2014) 19. Non-aromatic hydrocarbons, ASTM D6563-12 Benzene, Toluene, Ethylbenzene, Xylenes and Total C9 + aromatic hydrocarbons II ACETONE, METHYL 1. Color Platinum-Cobalt Scale ASTM D1209-05(2011) ISO-BUTYL KETONE, METHYL ETHYL 2. Density/Specific Gravity ASTM D4052-16 KETONE 3. Water by Karl Fischer ASTM E1064-16; ASTM E203-16 4. Distillation ASTM D1078-11; IP195/98(09) BS 2000:Part 195:1998 5. Non-volatile Matter ASTM D1353-13 6. Permanganate Time ASTM D1363-06(2011) 7. Acidity ASTM D1613-17 8. Odour ASTM D1296-01(2012) 9. Water Miscibility (Hydrocarbons) ASTM D1722-09

10. Alcoholic Impurities BS 509 Part 2-84 11. Alkalinity in Acetone ASTM D1614-09





III METHANOL, ETHANOL, 1. Density/Specific Gravity ASTM D4052-16 PROPANOLS, BUTANOLS 2. Distillation ASTM D1078-11; IP195/98(09) BS 2000:Part 195:1998 3. Water by Karl Fischer ASTM E1064-16; ASTM E203-16 4. Water Miscibility (Hydrocarbons) ASTM D1722-09 5. Permanganate Time ASTM D1363-06(2011) 6. Color Platinum-Cobalt Scale ASTM D1209-05(2011) 7. Acidity ASTM D1613-17 8. Non-Volatile Matter ASTM D1353-13 9. Flash Point ASTM D56-16a 10. Odour ASTM D1296-01(2012) 11. Acetone ASTM D1612-05 12. Carbonisable Impurities ASTM E346-08e1

13. pHe ASTM D6423-14 IV ETHYLENE GLYCOL 1. Density/Specific Gravity ASTM D4052-16 (MONOETHYL ETHER, ETHYLENE GLYCOL 2. Color Platinum-Cobalt Scale ASTM D1209-05(2011) MONOBUTYL ETHER, DIETHYLENE GLYCOL 3. Water by Karl Fischer ASTM E1064-16 MONOETHYL ETHER, ASTM E203-16 ETHYLENE GLYCOL MONOETHYL ETHER 4. Acidity ASTM D1613-17 ACETATE 5. Distillation ASTM D1078-11; IP 195/98(09); BS 2000:Part 195:1998

6. Odour ASTM D1296-01(2012) V ETHYL ACETATE, 1. Color Platinum-Cobalt Scale ASTM D1209-05(2011) BUTYL ACETATE 2. Density/Specific Gravity ASTM D4052-16





3. Acidity ASTM D1613-17 4. Water by Karl Fischer ASTM E1064-16 ASTM E203-16 5. Distillation ASTM D1078-11 IP 195/98(09) BS 2000:Part 195:1998 6. Odour ASTM D1296-01(2012) 7. Non-Volatile Matter ASTM D1353-13 VI MONOETHYLENE 1. Density/Specific Gravity ASTM D4052-16 GLYCOL, DIETHYLENE GLYCOL, 2. Acidity ASTM D1613-17 TRIETHYLENE GLYCOL, ASTM E2679-09 (2016)e1 PROPYLENE GLYCOL, MONOPROPYLENE 3. Distillation ASTM D1078-11; IP 195/98(09) GLYCOL, BS 2000:Part 195:1998 DIPROPYLENE GLYCOL 4. Water by Karl Fischer ASTM E1064-16; ASTM E203-16 5. Color Platinum-Cobalt Scale ASTM D1209-05(2011) 6. Iron ASTM E1615-16 ASTM E202-12 7. Ash ASTM D482-13; IP 4/05; BS 2000: Part 4:2002; BS EN ISO 6245:2002; ISO 6245:2001 VII METHYL TERTIARY- 1. Water by Karl Fischer ASTM E1064-16; ASTM E203-16 BUTYL ETHER 2. Color Platinum-Cobalt Scale ASTM D1209-05(2011) 3. Density/Specific Gravity ASTM D4052-16 4. Purity ASTM D5441-98(2013) VIII ACETIC ACID 1. Iron ASTM E394-15 2. Water by Karl Fischer ASTM E1064-16 ASTM E203-16





3. Color Platinum-Cobalt Scale ASTM D1209-05(2011) 4. Freezing Point ASTM E302-95 5. Density/Specific Gravity ASTM D4052-16 IX LOW AROMATIC 1. Copper Corrosion ASTM D130-12; WHITE SPIRIT IP 154/2000; ISO 2160:1998 BS 2000: Part 154:1999; BS EN ISO 2160:1998; 2. Color Saybolt ASTM D156-15 ASTM D6045-12(2017) 3. Distillation ASTM D1078-11; IP 195/98(09); BS 2000:Part 195:1998 4. Flash Point IP 170/09; ISO 13736:2013 BS 2000: Part 170:2008; BS EN ISO 13736:2013; ASTM D56-16a 5. Density/Specific Gravity ASTM D4052-16 X GASES 1. Copper Strip Corrosion ASTM D1838-16 2. Oil Stain/Residues ASTM D2158-16a; IP 317/95(02); BS 2000: Part 317:1995 3. Composition GLC (ASTM D2163-14e1) 4. Volatility of LPG ASTM D1837-17 XI BUTYL ACRYLATE, 1. Water by Karl Fischer ASTM E1064-16; ASTM E203-16 2- ETHYL HEXYL ACRYLATE, 2. Color Platinum-Cobalt Scale ASTM D1209-05(2011) METHYL METHACRYLATE 3. Acidity ASTM D1613-17 4. Inhibitor ASTM D3125-06(2012) 5. Density/Specific Gravity ASTM D4052-16 XII PHENOL 1. Water by Karl Fischer ASTM E1064-16 ASTM E203-16





2. Color Platinum-Cobalt Scale ASTM D1209-05(2011) 3. Freezing Point ASTM D1493-97 XIII STYRENE MONOMER 1. Water by Karl Fischer ASTM E1064-16; ASTM E203-16 2. Inhibitor ASTM D4590-13 3. Polymer ASTM D2121-16 4. Aldehydes as Benzaldehyde ASTM D2119-09 5. Peroxides ASTM D2340-13 6. Color Platinum-Cobalt Scale ASTM D1209-05(2011) 7. Density/Specific Gravity ASTM D4052-16 XIV POLYOLS 1. Water by Karl Fischer ASTM E1064-16 ASTM E203-16 2. Colour Platinum-Cobalt Scale ASTM D1209-05(2011) 3. Density/Specific Gravity ASTM D4052-16 4. Hydroxyl Number ASTM D4274-16 5. Acidity Number ASTM D4662-15 6. Suspended Matter ASTM D4670-17 XV CAUSTIC SODA 1. Sodium Hydroxide ASTM E291-09 2. Chlorides ASTM E291-09 (titrimetric method) 3. Iron ASTM E291-09 XVI VINYL MONOMER 1. Water by Karl Fischer ASTM E1064-16 ACETATE 2. Color Platinum-Cobalt Scale ASTM D1209-05(2011) 3. Acidity ASTM D2086-08(2012) 4. Density/ Specific Gravity ASTM D4052-16





5. Non-Volatile Matter ASTM D1353-13 6. Hydroquinone Content ASTM D2193-06(2012) XVII PETROCHEMICALS 1. FTIR Scan SGS-SG-OGCLAB-SP0095 / & SOLVENTS FTIR Spectroscopy 2. Chlorides Content SGS-RSP0055 / Turbidity 3. Total Nitrogen ASTM D3228-08(2014) 4. Hydrogen Peroxide Concentration SGS-SG-OGCLAB-SP0145 / EP0395 5. Water Content ASTM E1064-16; ASTM D6304-16e1

6. Bromine Index ASTM D1492-13 7. Refractive Index ASTM D1218-12(2016) B. PETROLEUM I NAPHTHAS / MOGAS / 1. Distillation ASTM D86-17; IP 123/11(2014) REFORMATE / BS 2000-123:2001; PYROLYSIS BS EN ISO 3405:2000 GASOLINE ISO 3405: 2011 BS EN ISO 3405:2000 ISO 3405:2011 2. Copper Corrosion ASTM D130-12 IP 154/2000; ISO 2160:1998 BS 2000: Part 154:1999; BS EN ISO 2160:1998; 3. Color Saybolt ASTM D156-15 ASTM D6045-12(2017) 4. Reid Vapor Pressure ASTM D323-15a 5. Existent Gum ASTM D381-12(2017) IP 131/99; ISO 6246:1995/ Cor.1 :1998 BS 2000: Part 131:1998 BS EN ISO 6246:1995/ Cor 1:1998





6. Oxidation Stability ASTM D525-12a IP 40/97(04); ISO 7536:1994 BS 2000: Part 40:1996; BS EN ISO 7536:1996; 7. Bromine Number ASTM D1159-07(2017) IP 130/98(04); BS 2000: Part 130:1998; 8. Density/Specific Gravity ASTM D1298-12b(2017); IP 160/99; ISO 3675:1998 BS 2000: Part 160:1998; BS EN ISO 3675:1998; 9. Aromatics ASTM D1319-15; IP 156/08 ; BS EN 15553 : 2007; BS 2000-156 : 2007 10. Olefins ASTM D1319-15; IP 156/08 ; BS EN 15553 : 2007; BS 2000-156 : 2007 11. Saturates ASTM D1319-15; IP 156/08 ; BS EN 15553 : 2007; BS 2000-156 : 2007 12. PNA ASTM D5443-14 13. Phosphorus ASTM D3231-13 14. Density/Specific Gravity ASTM D4052-16; IP 365/97(04); ISO 12185:1996/Cor.1:2001 BS 2000:Part 365:1996; BS EN ISO 12185:1996; 15. Doctor Test IP 30/07(14) ; ASTM D235- 02(2012) Section 6.1.10; ASTM D4952-12(2017) 16. Hydrogen Sulfide IP 570/14a(2015); ASTM D7621-16 17. Mercaptan Sulfur ASTM D3227-16; IP 342/2000; ISO 3012:1999 BS 2000: Part 342:2000





18. Lead IP 224/02(2014) ASTM D3237-17 ASTM D3341-16 IP 362/93(2014) 19. Benzene ASTM D5580-15 20. MTBE and other Oxygenates ASTM D4815-15b 21. (RON + MON) / 2 Calculated 22. Total Mercury and Mercury UOP 938-10 Species 23. Sulphur IP 336/04(2014) ; ISO 8754:2003 BS 2000: Part 336:2003 BS EN ISO 8754:2003 ASTM D4294-16e1 24. Oxygenates and Paraffin, ASTM D6293-98(2003)e1 Olefin, Naphthene, Aromatic ASTM D6839-17 (O-PONA) 25. Vapour Pressure (Mini Method) ASTM D5191-15

26. Total Sulphur ASTM D5453-16e1; ISO 20846: 2011; IP 490/05 BS 2000-490:2011 27. Manganese in Gasoline by AAS ASTM D3831-12(2017) 28. ETBE, MTBE, DIPE, TAME SGS-SG-OGCLAB-SP0130 Ethanol, i-Propanol & n-Propanol LowOx Analyser (GC) t-Butanol & i-Butanol & 2-Butanol n-Butanol 29. Calorific Value, Gross ASTM D240-17 ASTM D4809-13 30. Nitrogen Content ASTM D4629-12(2017) 31. Silver Corrosion ASTM D7671-10(2015) 32. Metals SGS RSP0003 (Na, V, Al, Cu, Fe, Pb, Si, Cr, Ca, Zn, K, Ba, Ni, B, Co, P, Mg, Mn, Sn)





33. Heat of Combustion, Gross ASTM D4868-17 Heat of Combustion, Net 34. Boiling Range Distribution ASTM D7096-16 (FBP < 280°) 35. Sulfur ASTM D7039-15a; ISO 20884:2011 36. Research Octane Number ASTM D2699-16e1 ; IP 237/14 BS 2000: Part 237:2014 BS EN ISO 5164:2014 ISO 5164:2014 37. Motor Octane Number ASTM D2700-16a ; IP 236/14 BS 2000: Part 236:2014 BS EN ISO 5163:2014 ISO 5163:2014 38. DHA Analysis ASTM D6730-01(2016) 39. Sulfur Compounds ASTM D5623-94(2014) II CRUDE OIL 1. Sediment by Extraction ASTM D473-07(2017)e1 IP 53/00(2014); ISO 3735:1999 BS 2000: Part 53:1999 BS EN ISO Part 3735:1999 2. Density / Specific Gravity / API ASTM D1298-12b(2017) IP 160/99; ISO 3675:1998 BS 2000: Part 160:1998 BS EN ISO 3675:1998 3. Water by Distillation ASTM D4006-16e1

IP 358/97(03); ISO 9029:1990 BS 2000: Part 358:1997 BS EN ISO 9029:1997 4. Water & Sediment by Centrifuge ASTM D4007-11(2016)e1

5. Salt in Crude IP 265/01(13) 6. Water by Karl Fischer IP 356-99(2014); ISO 10336:1997 BS 2000: Part 356:1999 ASTM D4377-00(2011) ASTM E203-16





7. Total Mercury and Mercury Species UOP 938-10 8. Density / Specific Gravity ASTM D5002-16

9. Chloride, Organic ASTM D4929-16;

UOP 779/08 Chloride, Inorganic ASTM D5808-09a(2014) 10. Pour Point ASTM D5853-17; IP441/99(2004) 11. n-Heptane Insolubles ASTM D3279-12e1 12. Acid Number ASTM D664-11a(2017) (Proc A) 13. Total Sulfur ASTM D4294-16e1

III GAS OIL / DIESEL 1. Metals SGS RSP0003 (Na, V, Al, Cu, Fe, Pb, Si, Cr, Ca, Zn, K, Ba, Ni, B, Co, P, Mg, Mn, Sn) 2. Distillation ASTM D86-17; IP 123/11(2014) BS 2000-123:11(2014) BS EN ISO 3405:2011 ISO 3405:2011 3. Flash Point ASTM D93-16a; IP 34/03 ISO 2719:2016 BS 2000: Part 34:2016 BS EN ISO 2719:2016 ASTM D56-16a 4. Water by Distillation ASTM D95-13e1; IP 74/00(2014) BS 2000: Part 74:2000 ISO 3733:1999 5. Pour Point ASTM D97-17a IP 15/95(2014); ISO 3016:1994 BS 2000: Part 15:1995(2014) ASTM D5950-14 6. Copper Corrosion ASTM D130-12 IP 154/00(2013) ; ISO 2160:1998 BS 2000: Part 154:1999 BS EN ISO 2160:1998





7. Conradson Carbon Residue ASTM D189-06(2014) IP 13/94(2014); ISO 6615:1993 BS 2000: Part 13:1994 8. Stability by Spot Test ASTM D4740-04(2014) 9. Total Acid Number ASTM D974-14e2; IP 139/98(2004) BS 2000: Part 139:1998 ISO 6618:1997/Cor.1:1999 10. Strong Acid Number ASTM D974-14e2; IP 139/98(04) BS 2000: Part 139:1998 ISO 6618:1997/Cor.1:1999 11. Cetane Index ASTM D976-06(2016) ASTM D4737-10(2016) IP 380/08; ISO 4264:2007 /Amd.1:2013 BS EN ISO 4264:2007 BS 2000: Part 380:2007 12. Colour ASTM D1500-12 IP 196/97(04); ISO 2049:1996 BS 2000: Part 196:1997 ASTM D6045-12(2017) 13. Micro Carbon Residue ASTM D4530-15; IP 398/96(04); ISO 10370:2014 BS 2000: Part 398:1996 BS EN ISO 10370:2014 14. Kinematic Viscosity ASTM D445-17a IP 71 Section 1/97 BS 2000: Part 71: Section 1:1996 BS EN ISO 3104:1996 ISO 3104:1994/Cor.1:1997 15. Sediment by Extraction ASTM D473-07(2017)e1 IP 53/00(2014); ISO 3735:1999 BS 2000: Part 53:1999 BS EN ISO 3735:1999





16. Ash ASTM D482-13 ; IP 4/05(2012) BS 2000: Part 4:2002 BS EN ISO 6245:2002 ISO 6245:2001

17. Density / Specific Gravity ASTM D1298-12b(2017); IP

160/99 BS 2000: Part 160:1998 BS EN ISO 3675:1998 ISO 3675:1998 ASTM D4052-16 IP 365/97(04); ISO 12185:1996 /Cor.1:2001 BS 2000: Part 365: 1996 BS EN ISO 12185:1996 18. Accelerated Oxidation ASTM D2274-14; ISO 12205:1995 Stability IP 388/97(04) BS 2000: Part 388:1996 BS EN ISO 12205:1996 19. Cloud Point ASTM D2500-17; IP 219/94(2013) BS 2000: Part 219:1994 BS EN 23015:1994 ISO 3015:1992 ASTM D5771-17; IP 444/09 20. Water & Sediment by Centrifuge ASTM D2709-16 21. Sulfur ASTM D4294-16e1; IP 336/04(2014) ; ISO 8754:2003 BS 2000: Part 336:2003 BS EN ISO 8754:2003 22. Compatibility by Spot Test ASTM D4740-04(2014) 23. Cold Filter Plugging Point IP 309/16; BS EN 116:2015 BS 2000: Part 309:2015 ASTM D6371-17 24. Total Mercury and Mercury Species UOP 938-10 25. Appearance ASTM D4176-04(2014)





26. Total Sulphur ASTM D5453-16e1 ISO 20846:2011 IP 490/05 ; BS 2000-490:2011 ASTM D3120-08(2014) 27. Aromatic Hydrocarbons IP 391/07 ; BS EN 12916:2006 (MAH, DAH, TAH, PAH) BS 2000: Part 391:2006 28. Calorific Value, Gross ) ASTM D240-17 Calorific Value, Net ) ASTM D4809-13 29. Lubricity ASTM D6079-11(2016); ASTM D7688-11(2016) IP 450/00; ISO 12156-1:2016 CEC-F-06-A-96 30. Particulate Contamination ASTM D6217-11(2016); IP 415/07 31. FAME Content BS EN 14078:2014 32. Nitrogen Content ASTM D4629-12(2017) 33. Particulate Contamination/ ISO 4406:2017 Particle Count 34. Filter Blocking Tendency (FBT) IP 387/16; ASTM D2068-17 35. Heat of Combustion, Gross ASTM D4868-17 Heat of Combustion, Net 36. Boiling Range Distribution ASTM D7096-16 (FBP<280°) 37. Sulfur ASTM D7039-15a ISO 20884:2011 38. Ramsbottom Carbon Residue ASTM D524-15; IP 14/94(04) 39. Electrical Conductivity ASTM D2624-15; IP 274/09 40. Water Separation Characteristics ASTM D7261-14 41. Water Content ASTM D6304-16e1





42. Cetane Number BS EN ISO 5165: 1998; IP 41/99(2014); ASTM D613-17b

43. Trace Elements by ICP ASTM D7111-16 44. n-Heptane Insolubles ASTM D3279-12e1

IV MARINE DIESEL 1. Density at 15°C ISO 3675:1998; (Category ISO-F- DMX, ISO 12185:1996 /Cor.1:2001 DMA, DMB, DMC & DMZ) 2. Kinematic Viscosity at 40°C ISO 3104:1994/Cor.1:1997 3. Flash Point ISO 2719:2016 4. Pour Point ISO 3016:1994 5. Cloud Point ISO 3015:1992 6. Sulfur ISO 8754:2003 7. Cetane Index ISO 4264:2007/Amd.1:2013 8. Carbon Residue on 10% (v/v) ISO 10370:2014 Distillation Bottoms 9. Ash ISO 6245:2001 10. Appearance Visual 11. Total Sediment, Existent ISO 10307-1:2009 12. Water ISO 3733:1999 13. Vanadium IP 501/05 14. Alumunium plus Silicon IP 501/05 15. Used Lubricating Oil (ULO): IP 501/05 Zinc, Phosphorus, Calcium 16. Hydrogen Sulfide IP 570/14a(2015); ASTM D7621-16 17. Acid Number ASTM D664-11a(2017)





18. Sulfur ASTM D7039-15a ISO 20884:2011 V FUEL OIL 1. Metals SGS-RSP0003 (Na, V, Al, Cu, Fe, Pb, Si, Cr, Ca, Zn, K, Ba, Ni, B, Co, P, Mg, Mn, Sn) 2. Flash Point ASTM D93-16a; IP 34/03 ISO 2719:2016 BS 2000: Part 34:2002 BS EN ISO 2719:2016 ASTM D92-16b; IP 36/02 ISO 2592:2000 BS 2000: Part 36:2002 BS EN ISO 2592:2001 3. Water by Distillation ASTM D95-13e1; IP 74/00(2014) BS 2000: Part 74:2000 ISO 3733:1999 4. Pour Point ASTM D97-17a; IP 15/95(2014) BS 2000: Part 15:1995 ISO 3016:1994 5. Conradson Carbon Residue ASTM D189-06(2014) IP 13/94(2014); ISO 6615:1993 BS 2000: Part 13:1994 6. Micro Carbon Residue ASTM D4530-15 IP 398/15; ISO 10370:2014 BS 2000: Part 398:1996 BS EN ISO 10370:2014 7. Kinematic Viscosity ASTM D445-17a IP 71 Section 1/97 BS 2000: Part 71: Sect. 1:1996 BS EN ISO 3104:1996 ISO 3104:1994/Cor.1:1997 8. Sediment by Extraction ASTM D473-07(2017)e1; IP 53/00(2014) BS 2000: Part 53:1999 BS EN ISO 3735:1999 ISO 3735:1999





9. Ash ASTM D482-13 ; IP 4/05 BS 2000: Part 4:2002 BS EN ISO 6245:2002 ISO 6245:2001 10. Vacuum Distillation ASTM D1160-15

11. Density / Specific Gravity ASTM D1298-12b(2017); IP

160/99 BS 2000: Part 160:1998 BS EN ISO 3675:1998 ISO 3675:1998 ASTM D4052-16; ISO 12185:1996/Cor.1 :2001 IP 365/97(04) BS 2000: Part 365:1996 BS EN ISO 12185:1996 12. Water & Sediment by Centrifuge ASTM D1796-11(2016) 13. Compatibility by Spot Test ASTM D4740-04(2014) 14. Modified Xylene Equivalent BP 230/75 15. Salt Content IP 77/72(2012) 16. Asphaltenes IP 143/04; ASTM D6560-12 BS 2000: Part 143:2004 17. Total Sediment IP 375/99; ASTM D4870-09(2014) BS 2000: Part 375:1999 ISO 10307-1:2011

18. Aluminium IP 377/95(2014) ; ISO

10478:1994 BS 2000: Part 377:1995 ASTM D5184-12(2017) IP 501/05

19. Silicon IP 377/95(2014) ; ISO

10478:1994 BS 2000: Part 377:1995 ASTM D5184-12(2017) IP 501/05 20. Flocculation Shell Method-80





21. Wax Content UOP 46-85 22. Sulfur ASTM D4294-16e1 IP 336/04(2014); ISO 8754:2003 BS 2000: Part 336:2003 BS EN ISO 8754:2003 23. Stability by Spot Test ASTM D4740-04(2014)

24. Total Sediment IP 390/11;

ISO 10307-2:2009/Cor.1:2010) (Accelerated/Potential) BS 2000: Part 390:1994 25. Saybolt Universal Viscosity ASTM D2161-17 26. Total Acid Number ASTM D664-11a(2017); IP 177/13 27. Metals (Al, Si, V, Ni, Fe, Na, Ca, Zn IP 501/05 & P) 28. Calorific Value, Gross ) ASTM D240-17 Calorific Value, Net ) ASTM D4809-13 29. Nitrogen Content ASTM D5762-12(2017) 30. Hydrogen Sulfides ASTM D5705-15 31. Total Nitrogen ASTM D3228-08(2014) 32. Hydrogen Sulfide IP 570/14a(2015); ASTM D7621-16 33. Carbon, Hydrogen and ASTM D5291-16(Proc D) Nitrogen Content 34. Heat of Combustion, Gross ASTM D4868-17 Heat of Combustion, Net 35. n-Heptane Insolubles ASTM D3279-12e1





VI MARINE RESIDUAL 1. Density at 15°C ISO 3675: 1998; FUELS (ISO-F-RMA 10, ISO 12185:1996 /Cor.1:2001 RMA 30,RMB 30, RMD 80, RME 180, RMF 180, 2. Kinematic Viscosity at 50°C ISO 3104:1994/Cor.1:1997 RMG 180,RMG 380, RMG 500, RMG 700, 3. Flash Point ISO 2719:2016 RMH 380, RMH 700, RMK 380, RMK 500, 4. Pour Point ISO 3016:1994 RMK 700) 5. Carbon Residue ISO 10370:2014 6. Ash ISO 6245:2001 7. Water ISO 3733:1999 8. Sulfur ISO 8754:2003 9. Vanadium IP 501/05 10. Total Sediment, potential ISO 10307-2:2009 11. Aluminium plus Silicon IP 501/05 12. Used Lubricating Oil (ULO): IP 501/05 Zinc, Phosphorus, Calcium 13. Hydrogen Sulfide IP 570/14a(2015); ASTM D7621-16 14. Acid Number ASTM D664-11a(2017) VII LUBRICATING OIL 1. Metals SGS-RSP0003 LUBE OIL ADDITIVES (Na, V, Al, Cu, Fe, Pb, Si, Cr, Ca, HYDRAULIC OIL/ Zn, K, Ba, Ni, B, Co, BASE OIL P, Mg, Mn, Sn) 2. Flash Point ASTM D93-16a; IP 34/03 BS 2000: Part 34:2002 BS EN ISO 2719:2016 ISO 2719:2016 ASTM D92-16b IP 36/02; ISO 2592:2000 BS 2000: Part 36:2002 BS EN ISO 2592:2001





3. Water by distillation ASTM D95-13e1

IP 74/00(2014); ISO 3733:1999 BS 2000: Part 74:2000 4. Pour Point ASTM D97-17a ; IP 15/95(2014) BS 2000: Part 15:1995 ISO 3016:1994 ASTM D5950-14 5. Conradson Carbon Residue ASTM D189-06(2014) IP 13/94(2014); ISO 6615:1993 BS 2000: Part 13:1994 6. Micro Carbon Residue ASTM D4530-15 IP 398/96(04) ; ISO 10370:2014; BS 2000: Part 398:1996 BS EN ISO 10370:2014 7. Kinematic Viscosity ASTM D445-17a IP 71 Section 1/97 BS 2000: Part 71: Section 1:1996 BS EN ISO 3104:1996 ISO 3104:1994/Cor.1:1997 8. Total Acid Number ASTM D664-11a(2017); IP 177/13 ASTM D974-14e2 ; IP 139/98(04) ISO 6618:1997 9. Sulfated Ash ASTM D874-13a; IP 163/96(03) ISO 3987:2010 BS 2000: Part 163:1996 10. Insolubles in Used Lube ASTM D893-14 11. Density / Specific Gravity ASTM D4052-16

IP 365/97(04); ISO 12185:1996

/Cor.1 :2001 BS 2000: Part 365:1996 BS EN ISO 12185:1996 12. Viscosity Index ASTM D2270-10(2016); IP 226/04(2014) BS 2000: Part 226:2002 ISO 2909:2002





13. Total Base Number ASTM D2896-15 IP 276/95(04); ISO 3771:2011 BS 2000: Part 276:1996 14. Water Content ASTM D6304-16e1 15. Nitrogen Content ASTM D4629-12(2017) ASTM D5762-12(2017) 16. Elements (Al, Ba, B, Ca, Cr,Cu, Fe, ASTM D5185-09 P, Pb, Mg, Mn, Mo,Ni, K, Na, Si, Ag,S, Sn, Ti, V, Zn) 17. Particulate Contamination/ ISO 4406:2017 Particle Count 18. Calorific Value, Gross ) ASTM D240-17 Calorific Value, Net ) ASTM D4809-13 19. Total Nitrogen ASTM D3228-08(2014) 20. Carbon, Hydrogen and ASTM D5291-16Proc D) Nitrogen Content 21. Apparent Viscosity using ASTM D5293-17e1

Cold-Cracking Simulator 22. Evaporation Loss of ASTM D5800-15a(Proc B) Lubrication Oil by Noack Method 23. Heat of Combustion, Gross ASTM D4868-17 Heat of Combustion, Net VIII KEROSENE / JET 1. Distillation ASTM D86-17 IP 123/11(2014); ISO 3405:2011 BS 2000-123:2001 BS EN ISO 3405:2011 2. Copper Corrosion ASTM D130-12; IP 154/00 BS 2000: Part 154:1999 BS EN ISO 2160:1998 ISO 2160:1998 3. Color Saybolt ASTM D156-15 ASTM D6045-12(2017)





4. Flash Point ASTM D93-16a; IP 34/03; ISO 2719:2016 BS 2000: Part 34:2002 BS EN ISO 2719:2016 ASTM D56-16a IP 170/09; ISO 13736:2013 BS 2000: Part 170:2008 BS EN ISO 13736:2013 5. Burning Quality ASTM D187-08 (2013) 6. Existent Gum ASTM D381-12(2017) IP 131/99; ISO 6246:1995/Cor.1:1998 BS 2000: Part 131:1998 BS EN ISO 6246:1998/Cor.1:1998 IP 540/08(2014) 7. Kinematic Viscosity ASTM D445-17a IP 71 Section 1/97 BS 2000: Part 71: Section 1: 1996 BS EN ISO 3104:1996 ISO 3104:1994/Cor.1:1997

8. Aniline Point ASTM D611-12(2016);

IP 2/98 (2004) BS 2000: Part 2:1998 ISO 2977:1997 9. Total Acid Number ASTM D974-14e2 IP 139/98(2004); ISO 6618:1996 BS 2000: Part 139:1998 ASTM D664-11a(2017); IP 177/13 10. Total Acidity ASTM D3242-11(2017); IP 354/09 11. Water Reaction ASTM D1094-07(2013) 12. Estimation of Net Heat of ASTM D1405 / D1405M-08(2013) Combustion of Aviation Fuel ASTM D3338 / D3338M- 09(2014)e2 ASTM D4529-17 IP 381/97(2014); ISO 3648:1994 /Cor.1:1996 BS 2000: Part 381:1997





13. Bromine Number ASTM D1159-07(2017) IP 130/98(2011); ISO 3839:1996 BS 2000: Part 130:1998 14. Density / Specific Gravity ASTM D1298-12b(2017) IP 160/99; ISO 3675:1998 BS 2000: Part 160:1998 BS EN ISO 3675:1998 15. Aromatics ASTM D1319-15; IP 156/08 ; BS EN 15553:2007 BS 2000-156 :2007 16. Olefins ASTM D1319-15 IP 156/08 ; BS EN 15553:2007 BS 2000-156: 2007 17. Density / Specific Gravity ASTM D4052-16 IP 365/97(04); ISO 12185:1996 /Cor.1 :2001 BS 2000:Part 365:1996 BS EN ISO 12185:1996

18. Smoke Point ASTM D1322-15e1; IP

598/12(2015) IP 57/95(2013); ISO 3014:1993 BS 2000: Part 57:1995 19. Naphthalene ASTM D1840-07(2013) 20. Particulate Contaminant ASTM D2276-06(2014); IP 216/05 ASTM D5452-12 ; IP 423/10 21. Freezing Point ASTM D2386-15e1 ; IP 16/15 ASTM D7153-15e1; IP529/15 22. Electrical Conductivity ASTM D2624-15 ; IP 274/09 23. Mercaptan Sulfur ASTM D3227-16; IP 342/2000; ISO 3012:1999 BS 2000: Part 342:2000 24. Thermal Oxidation Stability ASTM D3241-16a ; IP 323/14 25. Char Value IP 10/12 BS 2000: Part 10:2011





26. Water Separation Characteristics ASTM D3948-14 27. Doctor Test IP 30/07(14); ASTM D235-02(2012) Section 6.1.10; ASTM D4952-12(2017) 28. Copper Content IP 225/76(2014) 29. Silver Corrosion IP 227/99 30. Sulfur ASTM D4294-16e1; IP 336/04(2014) ; ISO 8754:2003 BS 2000: Part 336:2003 BS EN ISO 8754:2003 ASTM D7039-15a ISO 20884:2011 ASTM D5453-16e1 31. Total Mercury and Mercury Species UOP 938-10 32. Aromatic Hydrocarbon ASTM D6379-11 ; IP 436/11 (MAH, DAH, Total aromatic hydrocarbon) 33. Fuel System Icing Inhibitors (FSII) ASTM D5006-11(2016) 34. Particle Count IP 564/13; ISO 4406:1999 IP 565/13 35. Calorific Value, Gross ) ASTM D240-17 Calorific Value, Net ) ASTM D4809-13 36. FAME Content IP 585/10 37. Boiling Range Distribution ASTM D7096-16 (FBP < 280°) 38. Appearance ASTM D4176-04(2014) ; Visual





IX BIODIESEL ANALYSIS 1. Ester Content, Linolenic Acid, BS EN 14103:2011 BIODIESEL (B100) / Methyl Ester BLENDS OF BIODIESEL WITH MIDDLE 2. Methanol Content BS EN 14110:2003 DISTILLATE PETROLEUM FUEL 3. Monoglyceride, Diglyceride, BS EN 14105:2011 ANALYSIS Triglyceride, Free Glycerol, ASTM D6584-17

Total Glycerol / Total Glycerin 4. Acid Value BS EN 14104: 2003 5. Acid Number ASTM D664-11a(2017); IP 177/13 6. Carbon Residue (on 10% BS EN ISO 10370:2014; Distillation Residue) ASTM D4530-15; IP 398/96(04) 7. Cloud Point BS EN 23015: 1994; ASTM D2500-17; IP 219/94(2013) ISO 3015:1992 ASTM D5771-17; IP 444/09 8. Copper Strip Corrosion (3h at 50°C) EN ISO 2160:1998; IP 154/00(2013) ASTM D130-12 9. Distillation ASTM D1160-15 10. Density at 15°C BS EN ISO 12185: 1996/ Cor.1:2001 IP 365/97(04) ASTM D4052-16 BS EN ISO 3675: 1998; IP 160/99; ASTM D1298-12b(2017) 11. Kinematic Viscosity at 40°C BS EN ISO 3104:1996/Cor.1:2001 ASTM D445-17a IP 71 Section 1/97 12. Flash Point (Closed Cup) ASTM D93-16a; IP 34/03 ISO 2719:2016 BS EN ISO 2719:2016 BS 2000 : Part 34:2016





13. Total Contamination BS EN 12662: 2008 ; IP 440/15 BS 2000 : Part 440:2008; BS EN 12662: 2014 ASTM D7321-16a 14. Oxidation Stability, 110°C BS EN 14112:2016 EN 15751:2014 15. Sodium (Na) BS EN 14108:2003 16. Potassium (K) BS EN 14109:2003 17. Water and Sediment ASTM D2709-16

18. Iodine Value EN 14111:2003 19. Sulfur Content ISO 20846:2011; ASTM D5453-16e1 IP 490/05 ; BS 2000-490:2004 20. Water Content EN ISO 12937:2000; IP 438/01 ASTM D6304-16e1 21. Sulfated Ash Content ISO 3987:2010 cor.1 2011; IP 163/96(03); ASTM D874-13a 22. Ca, K, Mg, Na BS EN 14538: 2006 ; IP 547/07 ; BS EN 2000 : Part 547:2006 23. Phosphorus Content BS EN 14107: 2003 24. Cold Soak Filtration Test ASTM D7501-12a 25. Sulfur ASTM D7039-15a; ISO 20884:2011 26. Filter Blocking Tendency (FBT) ASTM D2068-17; IP 387/16 27. Polyunsaturated (≥4 Double Bonds) EN15779:2009+A1:2013 Fatty Acid Methyl Esters (PUFA) 28. Cetane Number BS EN ISO 5165: 1998; IP 41/99(2014); ASTM D613-17b





X PETROLEUM WAX 1. Needle Penetration ASTM D1321-16a 2. Congealing Point ASTM D938-12(2017); IP 76/70(04) 3. Oil Content ASTM D721-17; IP 158/69(01) 4. Solvent Extractables ASTM D3235-16e1

5. Drop Melting Point ASTM D127-08(2015); IP 133/79(01) 6. Flash Point, COC ASTM D92-16b; IP 36/02 ISO 2592: 2000 BS 2000: Part 36: 2000 BS EN 2592:2001 7. Kinematic Viscosity @ 100oC ASTM D445-17a 8. Density @ 15 oC ASTM D1298-12b(2017)

XI BITUMEN / ASPHALT 1. Penetration ASTM D5 /D5M-13 EMULSION 2. Softening Point ASTM D36/ D36M-14e1 3. Ductility ASTM D113-07 4. Solubility in Trichloroethylene ASTM D2042-15 5. Flash Point ASTM D92-16b; IP 36/02; BS 2000: Part 36:2002; BS EN ISO 2592: 2001; ISO 2592:2000 6. Kinematic Viscosity ASTM D2170/D2170M-10; IP 319(07); EN 12595:2007 7. Dynamic Viscosity at 60°C, ASTM D2171/ D2171M-10 300 mmHg EN 12596:2007 8. Rolling Thin Film ASTM D2872-12el 9. Wax Content BS EN 12606-1:2007 IP 459-1/07





10. Thin Film Oven Test ASTM D1754/D1754M-09(2014) 11. Loss on Heating ASTM D6-95 (2011)e1

Approved Signatories 1. Mr Soh Hong Chow 2. Mr Chin Hui Seng

All accredited tests 3. Mr Roslan Bin Sujari 4. Mr Jeffri Tan 5. Mr Ismail Bin Abu ) For all accredited Petrochemical tests 6. Mr Selvathurai s/o Sinniah ) 7. Mr Sivasegar s/o Ponniah 8. Mr Lee Sim Hock 9. Mr Ong Heng Huat, Roy For all accredited Petroleum tests 10. Mr Lim Boon Keong, Joe 11. Mr Lin Ting Feng, Tommy 12. Mr Cheng Buan Seng Note: This laboratory is accredited in accordance with the recognised International Standard ISO/IEC 17025. A laboratory's fulfilment of the requirements of ISO/IEC 17025 means the laboratory meets both the technical competence requirements and management system requirements that are necessary for it to consistently deliver technically valid test results. The management system requirements in ISO/IEC 17025 are written in language relevant to laboratory operations and operate generally in accordance with the principles of ISO 9001.

MATERIALS / PRODUCTS - sac-accreditation.gov.sg · materials / products tested tests / properties...

Documents

Transcript of MATERIALS / PRODUCTS - sac-accreditation.gov.sg · materials / products tested tests / properties...