MATERIAL HANDLING AND AIR TOOLSd29c95q8mcesvj.cloudfront.net/wysiwyg/pdf/b396003f62a666987ed… ·...

Pricing Effective Through April, 2008

jettools.com Wiltontool.com

MATERIAL HANDLING AND AIR TOOLS

www.TheRentalShow.com

Feb. 11-14, 2008, at the Mandalay Bay Convention Center in Las Vegas

STEEL DEALS - Pricing Effective Through April, 2008

AIR TOOLS - New

Belt Sander

$100 00

Stock No. JSM-6100

Stock Number

Belt Size (WxL/IN)

Noise level (db)

Horse Power

(HP)

Free Speed (RPM)

Air Pressure

(PSI)Weight (LBS)

NetPrice

Distr. Price

JSM-6100 3/8 x 13 80 1/2 18,000 90 1-7/8 $143.00 $100.00

Ergo Grip Die Grinders

$54 00

Stock No. JSM-5130

• Ergonomic grip for operator comfort• Built in air regulator for

precise speed control• Equipped with a safety

throttle lock• Heavy duty ball bearing

construction• Rotating air inlet keeps air

Stock Number

Horse Power

(HP)

Free SpeeD (RPM)

Air Pressure

(PSI)Air Inlet (NPT/IN)

Air Hose

(ID/IN)

Overall Length

(IN)weight (LBS)

NetPrice

Distr. Price

JSM-5130 1/2 20,000 90 1/4 3/8 7-2/5 1-1/2 $140.00 $54.00JSM-5430 1/2 4,000 90 1/4 3/8 8-3/5 2 $178.00 $69.00JSM-5130L 1/2 20,000 90 1/4 3/8 13-7/10 3 $165.00 $64.00JSM-5252 1/4 20,000 90 1/4 3/8 6-1/4 1 $145.00 $56.00

Ergo Grip Air Ratchets

$58 00

Stock No. JSM-3330

• Heavy duty ball and needle bearing construction• Full gear cage• Ergonomic grip• Built in air regulator for

precise control• Rear exhaust• Low operating volume• Swiveling air inlet keeps

air hose tangle free

Stock Number

Square Drive (IN)

Bolt Capacity

(IN)

Anvil Retainer

Type

Maximum Torque

(FT/LBS)

Free Speed (RPM)

Weight (LBS)

NetPrice

Distr. Price

JSM-3330 3/8 1/2 BaLL 50 150 2-5/8 $83.00 $58.00

JSM-3430 1/2 1/2 BaLL 50 150 2-5/8 $83.00 $58.00

Reversible Ergo Grip Air Drills

$80 00

Stock No. JSM-7572

Stock Number

Chuck Size (IN)

Spindle Thread (IN/TPI)

Horse Power

(HP)

Free Speed (RPM)

Weight (LBS)

NetPrice

Distr. Price

JSM-7572 3/8 3/8-24 1/2 1800 3 $114.00 $80.00

JSM-7472 1/2 3/8-24 1/2 800 3-3/4 $137.00 $96.00

Ergo Grip Impact Wrenches

$120 00

Stock No. JSM-4341

Stock Number

Square Drive (IN)

Bolt Capacity

(IN)

Anvil Retainer

Type

Max Torque

(FT/LBS)

Free Speed (RPM)

weight (LBS)

NetPrice

Distr. Price

JSM-4140 3/8 1/2 RING 200 9000 2-3/4 $171.00 $120.00

JSM-4341 1/2 1/2 RING 250 9000 2-3/4 $171.00 $120.00JSM-4340 1/2 3/4 RING 600 7000 5-1/2 $145.00 $102.00

• Ergonomic Grip for increased operator comfort

• Multiple torque setting available with easy to use dial on back of impact wrench

• Heavy duty ball bearing construction• Rotating air inlet keeps air hose twist free• Low noise volume• Super light weight composite design

Ergo Grip Air Screwdrivers

$72 00

Stock No. JSM-8272

Stock Number

Chuck type

Chuck Size (IN)

Horse Power

(HP)

Free Speed (RPM)

Torque (FT/LBS)

Weight (LBS)

NetPrice

Distr. Price

JSM-8272 adjuStaBLE 1/4 1/2 1800 45-115 2-3/4 $77.00 $72.00

JSM-8372 adjuStaBLE 1/4 1/2 800 45-145 3 $98.00 $84.00

JSM-8672 PoSItIvE 1/4 1/2 800 145 3-1/2 $91.00 $82.00JSM-8472 PoSItIvE 1/4 1/2 1800 115 2-1/2 $80.00 $70.00

• Ball bearing and needle bearing construction for more efficient performance

• Muffled Handle Exhaust for quiet operation

• Pistol grip models have variable speed triggers for positive control

• all models equipped with jacobs chucks

• 1/2" model has an auxiliary side handle for better control

• Ergonomic Handle design• throttle features safety lock switch• Built in air swivel keeps air hose twist free• Rear exhaust directs air away from work• Equipped with exhaust silencer for

noise reduction• Built in regulator for positive speed

control

• Ergonomic handle design• Ball and needle bearing

construction for more efficent performance

• Muffled handle exhaust for quiet operation

• all pistol grip models have variable speed triggers for positive control

jettools.com wiltontool.com 3

Die Grinders / Impact Wrenches - AIR TOOLS

• Lightweight yet powerful and compact design

• Heavy-duty ball bearing construction for vibration-free performance

• durable precision machined and hardened steel gears

Stock Number Description

NetPrice

Distr. Price

JNS-7033 1/4" die Grinder 1/4HP 22,000 RPM $18.00 $13.00JNS-7034 1/4" angle die Grinder 1/4HP 20,000 RPM $37.00 $28.00JNS-7033E 1/4" die Grinder 1/4HP 22,000 RPM 6" anvil $41.00 $31.00JNS-7032 1/4" die Grinder 1/4HP 25,000 RPM $26.00 $20.00

Die Grinders

$13 00

Stock No. JNS-7033

3/8" Butterfly Impact Wrench

$2100

Stock No. JNS-5030

• Built-in air regulator for positive speed and torque control

• Front and/or rear bumper guards


NetPrice

Distr. Price

JNS-5030 3/8" Butterfly Impact Wrench 75 Ft LBS Max torque $28.00 $21.00

Quick Release Riveting Hammer

$20 00

Stock No. JNS-2060

Stock Number

Stroke Length

(IN)

Bore Size (IN)

Blows Per

Minute

Air Pressure

(PSI)

Air Inlet

(NPT/IN)Air Hose (ID/IN)

Overall Length

(IN)Weight (LBS)

NetPrice

Distr. Price

JNS-2060 2-5/8 3/4 5000 90 1/4 3/8 5-1/4 3 $27.00 $20.00

• Hardened Steel barrel and piston for less wear and longer life• Lightweight aluminum pistol grip housing with comfort grip• Built in air regulator• Quick release chisel holder

Air Drills with Keyless Chucks


• Muffled handle exhaust for quiet operation

• all pistol grip models have variable speed triggers for positive control


NetPrice

Distr. Price

JNS-4041KL 1/2" Reversible drill 1/2HP w/ Keyless Chuck $65.00 $49.00JNS-4031KL 3/8" Reversible drill 1/2HP w/ Keyless Chuck $42.00 $32.00

$32 00

Stock No. JNS-4031KL

• Steel spring ball retainers for rapid socket changing • variable speed lever throttle for better speed control • Hardened steel gears for long tool life


NetPrice

Distr. Price

JNS-5052 3/8" Ratchet Wrench 150 RPM 150 Ft LBS Max torque $29.00 $22.00

3/8" Ratchet Wrench

$22 00

Stock No. JNS-5052

Air Grinder

$60 00

Stock No. JNS-185

• throttle features lever lock for safety • Builit in air regulator • Hardened and beveled

steel gears for longer lift


NetPrice

Distr. Price

JNS-185 4-1/2"x5/8" air Grinder 1/2HP 11,000 RPM $145.00 $60.00



• Muffled handle exhaust for quiet operation• all pistol grip models have variable speed triggers

for positive control

Stock Number Reversible

Chuck Size (in.)

Spindle Thread (in./TPI)

Horse power

(HP)

Free Speed (RPM)

Ship Weight

Each (lbs.)

NetPrice

Distr. Price

JSM-701 No 3/8 3/8-24 1/2 2,200 3 $57.00 $40.00JSM-702 No 3/8 3/8-24 1/2 2,000 4 $80.00 $56.00JSM-703 No 1/2 3/8-24 1/2 500 5 $86.00 $60.00JSM-704 Yes 1/2 3/8-24 1/2 800 5 $86.00 $60.00JSM-705 Yes 3/8 3/8-24 1/2 1,800 4 $54.00 $38.00JSM-706 No 3/8 3/8-24 1/2 2,600 3 $51.00 $36.00JSM-709 No 3/8 3/8-24 1/3 1,900 4 $86.00 $60.00JSM-709R Yes 3/8 3/8-24 1/2 1,900 5 $99.00 $69.00JSM-710 No 3/8 3/8-24 1/2 2,600 3 $57.00 $40.00JSM-720 No 3/8 3/8-24 3/4 2,600 3 $126.00 $88.00JSM-724 Yes 1/2 3/8-24 1/2 800 5 $108.00 $76.00JSM-725 Yes 3/8 3/8-24 1/2 1,800 4 $83.00 $58.00

See page 194 of the 2006 Industrial Catalog, Stock No. 900894, for more information.

Air Drills

$36 00

Stock No. JSM-706

• Ball and needle bearing construction for more efficient performance

• Muffled handle exhaust for quiet operation• all pistol grip models have variable speed triggers

for positive control

Stock Number

Chuck Type*

Chuck Size (in.)

Horse power

(HP)

Free Speed (RPM)

Torque (in./lbs.)

Ship Weight

Each (lbs.)

NetPrice

Distr. Price

JSM-802 a 1/4 1/2 1,800 45 / 115 4 $77.00 $54.00JSM-804 P 1/4 1/2 1,800 115 4 $72.00 $50.00JSM-806 P 1/4 1/2 800 145 4 $83.00 $58.00JSM-812 a 1/4 1/2 1,800 45 / 115 4 $94.00 $66.00JSM-842 a 1/4 1/2 1,800 45 / 115 4 $82.00 $57.00JSM-843 a 1/4 1/2 800 45 / 145 4 $103.00 $72.00JSM-882 a 1/4 1/2 1,800 45 / 115 4 $156.00 $109.00


Screwdrivers

$50 00

Stock No. JSM-804

AIR TOOLS - Drills / Ratchet Wrenches / Screwdrivers Miscellaneous - AIR TOOLS


• Lightweight yet powerful and compact design



Stock Number Model

Collet Size (in.)

Horse-power (HP)

Free Speed (RPM)

Ship Weight

Each (lbs.)

NetPrice

Distr. Price

JSM-501 jSM-501 1/4 1/4 22,000 3 $41.00 $29.00JSM-512 jSM-512 1/4 1/4 22,000 3 $29.00 $20.00JSM-512F jSM-512F 1/4 1/4 22,000 2-1/2 $58.00 $41.00JSM-522 jSM-522 1/4 1/4 22,000 2 $53.00 $37.00JSM-532 jSM-532 1/4 1/4 25,000 2 $34.00 $24.00JSM-532E jSM-532E 1/4 1/4 25,000 4 $58.00 $41.00JSM-542 jSM-542 1/4 1/4 20,000 2 $122.00 $85.00526201 MG-1B 1/4 1/2 20,000 1-1/4 $132.00 $106.00

Die Grinders

$20 00

Stock No. JSM-512

JSM-522K kit includes: 1/4" angle Head die Grinder, (10 Each) Mounted Points, 1/8" Collet, (2 Each) Spanner Wrenches and Blow Mold Case

JSM-512K kit includes: 1/4" die Grinder, (10 Each) Mounted Points, 1/8" Collet, (2 Each) Spanner Wrenches and Blow Mold Case


Ship Weight Each (lbs.)

NetPrice

Distr. Price

JSM-512K die Grinder Kit 5 $37.00 $29.00JSM-522K die Grinder Kit 5 $63.00 $47.00


Die Grinder Kits

$29 00

Stock No. JSM-512K

• Built-in air regulator for positive speed and torque control

• Front and/or rear bumper guards

Stock Number

Square Drive (in.)

Bolt Capacity

(in.)

Anvil Retainer

Type

Max Torque (ft./lbs.)

Free Speed (RPM)

Ship Weight

Each (lbs.)

NetPrice

Distr. Price

JSG-0716N 1/2 5-8 Ring 280 7,000 5-1/4 $89.00 $62.00JSG-0717SH 1/2 5/8 Ring 380 7,000 6 $114.00 $80.00JSG-0740 3/4 1 Ring/Hole 480 4,500 10-1/2 $145.00 $102.00JSG-0750 3/4 1 Ring/Hole 500 4,500 10-1/2 $180.00 $126.00JSG-0751SH 3/4 1 Ring/Hole 530 5,000 11 $228.00 $160.00JSG-0775 3/8 3/8 Ring 75 10,000 2 $55.00 $39.00JSM-401 3/8 3/8 Ring 75 10,000 2-1/2 $43.00 $30.00JSM-403 1/2 5/8 Ring 250 7,000 5-1/4 $5500 $39.00


Impact Wrenches

$39 00

Stock No. JSM-403

JSG-0717SHK kit includes: 1/2" Impact Wrench, 3" Extension Bar, Hex Key Wrench and Blow Mold Case, Impact Sockets: 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1"

JSM-403K kit includes: 1/2" Impact Wrench, 5" Extension Bar, Hex Key Wrench and Blow Mold


Max. Torque


NetPrice

Distr. Price

JSM-403K 1/2" Impact Wrench Kit 250 5 $76.00 $60.00JSG-0717SHK 1/2" Impact Wrench Kit 380 12 $145.00 $100.00


Impact Wrench Kits

$60 00

Stock No. JSM-403K


AIR TOOLS - Drills / Ratchet Wrenches / Screwdrivers Miscellaneous - AIR TOOLS

Riveting Hammers

$16 00

Stock No. JSG-0101R

Stock Number

Stroke Length

(IN)Bore Size

(IN)Blows

Per MinuteShank Size

(in.)Air

Pressure (PSI)

Weight (LBS)

NetPrice

Distr. Price

JSG-0101R 1-5/8 3/4 5000 .401 Parker 90 2-1/4 $23.00 $16.00

JSG-0204R 2-5/8 3/4 3200 .401 Parker 90 3-1/4 $26.00 $18.00

JSG-0304R 3-1/2 3/4 2000 .401 Parker 90 3-1/2 $30.00 $21.00

• Special heat treated hardened steel barrel and piston for longer tool life

• Built in tease trigger and air regulator for precise control

• Standard spring retainer for quick tool changes

• No trigger, easy to operate• able to drive a wide variety

of nails• designed for accessibility in

confined areas

Stock Number

Air Press. (PSI)

Maximum Air Press.

(PSI)

Air Consump.

(CFM)Air Inlet (NPT/in.)

Air Hose (ID/in.)

Ship Weight

Each (lbs.)

NetPrice

Distr. Price

JSG-0125 90 115 4 1/4 3/8 4 $125.00 $88.00


• No trigger, easy to operate• Comfortable palm grip design• Replaces a wide variety of

hammers and mallets

Stock Number

Air Press. (PSI)

Maximum Air Press.

(PSI)

Air Consump.


Air Hose (ID/in.)

Ship Weight

Each (lbs.)

NetPrice

Distr. Price

JSG-0126 90 115 4 1/4 3/8 4 $118.00 $80.00


Palm Hammer

Palm Nailer

$80 00

Stock No. JSG-0126

$88 00

Stock No. JSG-0125

Kit includes: 3/8" Ratchet Wrench, 3" Extension Bar, universal joint, Screwdriver adapter, 3 Screwdriver Bits and Blow Mold Case



NetPrice

Distr. Price

JSM-30K 3/8" Ratchet Wrench Kit 6 $69.00 $53.00


Ratchet Wrench Kit

$53 00

Stock No. JSM-30K

• Heavy-duty, balanced, ball bearing construction

• Built-in regulator for positive speed control on models jSG-0402, jSG-0404, and jSG-0420

• dynamic counterweight vibration isolators for low vibration sanding

Stock Number

Pad Size (in.)

Spindle Thread (in./TPI)

Horse- power

(HP)

Free Speed (RPM)

Air Press. (PSI)

ShipWeight

(lbs.)Net

PriceDistr. Price

JSG-04023, 4-1/2,

5-1/2 Round

7/16 / 20 1/2 18,000 90 6 $35.00 $25.00

JSG-0404 6 Round 5/16 / 24 1/2 10,000 90 4 $45.00 $32.00

JSG-0416 3-2/3 x 6-1/2 - 1/2 8,000 90 6 $51.00 $36.00

JSG-0420 6 Round 5/16 / 24 1/2 10,000 90 6 $51.00 $36.00

JSG-0430 2-1/2 x 15-3/4 - - 3,000 90 8 $100.00 $70.00

JSG-0470 7 Round 5/8 / 11 1 4,500 90 6 $124.00 $87.00JSG-0472 7 Round 5/8 / 11 1 2,500 90 6 $129.00 $90.00JSG-9613 4 x 4-3/8 - 1 20,000 90 5 $84.00 $59.00JSM-603-5 5 Round 5/16 / 24 1/2 10,000 90 4 $103.00 $72.00JSM-603-6 6 Round 5/16 / 24 1/2 10,000 90 4 $103.00 $72.00JSM-603V-5 5 Round 5/16 / 24 1/2 10,000 90 5 $113.00 $79.00

See page 198 of the 2006 Industrial Catalog, Stock No. 900894, for more information.See page 197 of the 2006 Industrial Catalog, Stock No. 900894, for more information.

Sanders and Polishers

$25 00

Stock No. JSG-0402

• Steel spring ball retainers for rapid socket changing

• variable speed lever throttle for better speed control

• Hardened steel gears for long tool life

Stock Number

Square Drive (in.)

Bolt Capacity

(in.)

Anvil Retainer

Type


Free Speed (RPM)

Ship Weight

Each (lbs.)

NetPrice

Distr. Price

JSG-0719 1/4 1/4 Ball 18 240 2 $48.00 $34.00JSM-30 3/8 3/8 Ball 50 150 4 $43.00 $30.00JSM-31 1/2 3/8 Ball 50 150 4 $43.00 $30.00JSG-0735 1/2 1/2 Ball 90 150 5 $116.00 $81.00


Ratchet Wrenches

$30 00

Stock No. JSM-30



• Heavy-duty pistol grip design• Comes standard with

(14) 4mm needles

Stock Number

Blows Per

Minute

Stroke Length

(in.)Number of Needles

Size of Needles

(mm)Air Press.

(PSI)

Ship Weight

Each (lbs.)Net

PriceDistr. Price

JSG-3328NS 4,500 5/8 27 or 14 3 or 4 90 8 $288.00 $202.00

Pistol Grip Needle Scaler

$202 00

Stock No. JSG-3328NS

• Heat-treated barrels and pistons for extended tool life

• Lever lock retainer on Model jSG-9121

Stock Number

Blows Per

Minute

Stroke Length

(in.)Number of Needles

Size of Needles

(mm)Air Press.

(PSI)

Ship Weight

Each (lbs.)

NetPrice

Distr. Price

JSG-9121 4,600 1-1/8 - - 90 4 $99.00 $69.00JSG-9121NS 4,600 1-1/8 19 3 90 7 $113.00 $79.00


Needle Scalers/Flux Chippers

$69 00

Stock No. JSG-9121



• Rugged aluminum alloy housing with steel wheel guards

• air pressure 90 PSI

Stock Number

Wheel Size (in.)

Spindle Thread (in.-TPI)

Horsepower (HP)

Free Speed (RPM)

Air Consump.

(CFM)

Ship Weight

(lbs.)Net

PriceDistr. Price

JSG-0522 7 x 7/8 5/8-11 1 7,000 7 10 $265.00 $186.00JSM-619 4 x 5/8 3/8-24 1/2 11,000 4 5 $120.00 $84.00

JSM-6195B 5 x 7/8 5/8-11 1/2 11,000 4 5 $125.00 $88.00

Angle Grinders

$186 00

Stock No. JSG-0522


• Rear exhaust directs air away from work

• Equipped with exhaust silencer for noise reduction

• Built-in regulator for positive speed control

Stock Number

Belt Size (in.)

Noise Level (db)

Horse-power

(HP)

Free Speed (RPM)

Air Press. (PSI)

Ship Weight

Each (lbs.)

NetPrice

Distr. Price

JSM-610 3/8 x 13 80 .37 16,000 90 3 $141.00 $99.00

JSM-612 1/2 x 24 80 .37 16,000 90 3 $147.00 $103.00

JSM-620 3/4 x 20-1/2 82 .45 16,000 90 4 $213.00 $149.00

Mini Pneumatic Belt Sanders

$99 00

Stock No. JSM-610

• Heat-treated barrels and pistons for extended tool life

Stock Number

Blows Per

Minute

Stroke Length

(in.)

Number of

Needles

Size of Needles

(mm)

Air Press. (PSI)

Air Consump.

(CFM)

Ship Weight

(lbs.)Net

PriceDistr. Price

F-25 4,000 7/8 — — 90 4 5 $121.00 $85.00F-25NS 4,000 7/8 19 3 90 4 6 $165.00 $116.00


Flux Chippers

$85 00

Stock No. F-25

AIR TOOLS - Miscellaneous Miscellaneous - AIR TOOLS


AIR TOOLS - Miscellaneous Miscellaneous - AIR TOOLS

• Balanced, lightweight design for ease in handling

• Cuts 18 gauge (.048") metal without edge distortion

• Lever throttle for slow speed starting jobs

Stock Number

Metal Capacity (gauge)

Free Speed(RPM)

Air Press. (PSI)

Air Consump.


Ship Weight

Each (lbs.)

NetPrice

Distr. Price

JSM-213 18 2,600 90 4 1/4 3 $64.00 $45.00


Air Nibbler

$45 00

Stock No. JSM-213

• Cuts metal up to 18 gauge thick (.048")

• Replaceable heavy-duty cutting jaws and blades

• Heavy-duty, ball bearing design for tough cutting jobs and extended tool life

Stock Number


Free Speed (RPM)

Air Press. (PSI)

Air Consump.


Ship Weight

Each (lbs.)

NetPrice

Distr. Price

JSM-204 18 2,200 90 4 1/4 6 $69.00 $48.00JSM-204S 18 2,200 90 4 1/4 3 $69.00 $48.00


Air Sheers

$48 00

Stock No. JSG-204

• unique two-in-one metalworking tool• 360º swivel head for versatile operation• Crimps up to 14 gauge (.075") sheet steel

or punches clean holes for welding applications

Stock Number

Metal Cap’y

(gauge)Punch

Diameter (in.)

Air Press. (PSI)

Air Consump.

(CFM)Ship Weight

(lbs.)Net

PriceDistr. Price

JSG-0692 14 3/16 90 4 5 $73.00 $51.00


Air Punch

$5100

Stock No. JSG-0692

• able to cut through metal up to 3/4" thick• Built-in speed regulator matches speed to job• Spark guard rotates 360º for greater safety• air pressure 90v PSI

Stock Number

Wheel Size (in.)

Horse- power (HP)

Free Speed (RPM)

Air Consump. (CFM)

Ship Weight

(lbs.)Net

PriceDistr. Price

JSG-0516 3 x 3/8 1/2 2,000 4 3 $37.00 $26.00


Utility Cut-Off Tools

$26 00

Stock No. JSG-0516

• Lightweight, slim design for cutting in confined areas• Positive blade retention with adjustable blade guide to

increase blade life and depth of cut

Stock Number

Stroke Length

(in.)


Free Speed (RPM)

Air Press. (PSI)

Air Consump.

(CFM)

Ship Weight

Each (lbs.)Net

PriceDistr. Price

JSG-0822 3/8 16 9,000 90 4 2 $79.00 $55.00


Air Body Saw

$55 00

Stock No. JSG-0822

• Rear exhaust keeps air flow away from work

• Lightweight aluminum housing for less operator fatigue

• Standard with four files

Stock Number

Stroke Length

(in.)Shank

Size (in.)Free Speed

(RPM)Air Press.

(PSI)

Air Consump.

(CFM)

Ship Weight

Each (lbs.)Net

PriceDistr. Price

JSG-0825 1/8 1/4 3,700 90 4 3 $98.00 $69.00


Air File

$69 00

Stock No. JSG-0825


Air/Water Hose Reel

$135 00

Stock No. 426238

• all steel construction for industrial application• durable powder coat paint finish• Spring powered auto-rewind with multi-position ratchet• Reel mounts on wall, floor or ceiling• Non-snag rollers reduce hose wear• 3/8" leak proof brass swivel

Stock Number Model

Hose Type

Hose Size ID/IN

Hose Length

(ft)

Working Press. (PSI)

Hose Inlet Size

(in)

Overall Dimension (LxWxH/in)

NetPrice

Distr. Price

426238 aHR-50 RuBBER 3/8 50 300 3/8 20-1/2 x 9 x 22 $151.00 $135.00

Polypropylene Air/Water Hose Reel

$75 00

Stock No. 426237

• Lightweight polypropylene construction• Spring powered auto-rewind with multi-position ratchet• Reel mounts on wall or ceiling• Non-snag rollers reduce hose wear• 3' lead-in hose included

Stock Number Model

Hose Type

Hose Size ID/IN

Hose Length

(ft)

Working Press. (PSI)

Hose Inlet Size

(in)

Overall Dimension (LxWxH/in)

NetPrice

Distr. Price

426237 PHR-50 RuBBER 3/8 50 300 3/8 18 x 9 x 18-1/2 $77.00 $75.00

Spray gun

$44 00

Stock No. JSG-1046

• Industrial quality with dripless cup• Cup tested to 800 pounds• Handles all kinds of paint, lacquer, stains,

enamel etc.• May be used with external pressure tank• one quart cup is teflon®-coated for easy

clean out• Spray nozzle and head made of brass;

will not corrode

Stock Number

Air Press. (PSI)

Air Consump.

(CFM)

Air Inlet

(NPT/in)

Air Hose

(ID/in)

Overall Length

(in)Weight

(Lbs)Net

PriceDistr. Price

JSG-1046 50 – 60 4 – 7 1/4 3/8 7 4 $58.00 $44.00

• Continuous production capability• Four nose pieces (3/32", 1/84", 5/32"

and 3/16") to set blind rivets• Quick-release air valve

Stock Number

Air Press. (PSI)

Air Consump.


Air Hose (ID/in.)

Overall Length (in.)

Ship Weight

Each (lbs.)Net

PriceDistr. Price

JSG-0810 70-100 1 - 4 1/4 3/8 6-1/4 3-1/2 $82.00 $57.00


Air Riveter

$57 00

Stock No. JSG-0810

• Professional quality for touch-up spraying, edging, shading or precision detail painting

• Eight-ounce clamp type paint cup

Stock Number

Air Press. (PSI)

Air Consump. (CFM)

Air Inlet (NPT/in.)

Air Hose (ID/in.)


NetPrice

Distr. Price

TG-400 70-100 1-4 1/4 3/8 5 $42.00 $34.00


Touch-Up Spray Gun

$34 00

Stock No. TG-400



AIR TOOLS - Miscellaneous Accessories - AIR TOOLS


AIR TOOLS - Miscellaneous Accessories - AIR TOOLS

• High performance, synthetic PvC blend• 300 PSI working pressure• Excellent weather and u.v. resistance• 1/4" NPt threads



NetPrice

Distr. Price

JAH-3825 3/8" x 25' air Hose 5 $11.00 $10.50JAH-3850 3/8" x 50' air Hose 7 $19.00 $23.00JAH-38100 3/8" x 100' air Hose 20 $37.00 $33.00


Air Hose

$10 50Stock No. JAH-3825

• 1/4" NPt threads on 1/4" hose• 3/8" NPt threads on 3/8" hose• Handles up to 200 PSI of air pressure



NetPrice

Distr. Price

JSA-225 1/4" x 25' Recoil air Hose 1 $6.00 $5.00JSA-250 1/4" x 50' Recoil air Hose 2 $9.00 $7.00JSA-325 3/8" x 25' Recoil air Hose 2 $10.00 $8.00


Recoil Air Hose

$5 00

Stock No. JSA-225

• air filter and oiler feature shatterproof plastic bowls with protective metal cups

• the air filter removes solid particles and condensates moisture accompanying compressed air

• Micro-fog lubricator supplies lubricating oil to the pneumatic tool in proper proportion to the air consumption


Filter Regulator Lubricators

$16 00

Stock No. JSB-1121

Stock Number Model Type*

Connection Port (NPT/

in.)Maximum Temp. (F)

Maximum Press. (PSI)

Ship Weight

Each (lbs.)

NetPrice

Distr. Price

JSB-2021 jSB-2021 FR 1/4 150 150 3 $44.00 $30.00JSB-2031 jSB-2031 FR 3/8 150 150 3 $44.00 $30.00JSB-2041 jSB-2041 FR 1/2 150 150 3 $44.00 $30.00





Ship Weight

Each (lbs.)

NetPrice

Distr. Price

JSB-3021 jSB-3021 FRL 1/4 150 150 3 $66.00 $42.00JSB-3031 jSB-3031 FRL 3/8 150 150 5 $66.00 $42.00JSB-3041 jSB-3041 FRL 1/2 150 150 5 $66.00 $42.00* FR – Filter Regulator, AF – Air Filter, FRL – Filter Regulator Lubricator, AR – Air Regulator





Ship Weight

Each (lbs.)

NetPrice

Distr. Price

JSB-1121 jSB-1121 aF 1/4 150 150 2 $24.00 $16.00JSB-1131 jSB-1131 aF 3/8 150 150 2 $24.00 $16.00JSB-1141 jSB-1141 aF 1/2 150 150 2 $24.00 $16.00





Ship Weight

Each (lbs.)

NetPrice

Distr. Price

JSB-1221 jSB-1221 aR 1/4 150 150 2 $25.00 $18.00JSB-1231 jSB-1231 aR 3/8 150 150 2 $25.00 $18.00JSB-1241 jSB-1241 aR 1/2 150 150 2 $25.00 $18.00

AIR FILTERS

AIR REGuLATORS

AIR FILTER/REGuLATORS

AIR FILTER/REGuLATOR/LuBRICATORS


• aluminum back for added strength and durability

• double suction pads for secure grip

• Standard with ratchet tie down for one person auto glass repair



NetPrice

Distr. Price

JSM-910K double Suction Cup Kit 4 $84.00 $67.00


Double Suction Cup Kit

Dual Head Tire Chuck

Dual Head Tire Chuck

Mini Oiler

Air Blow Gun

Air Swivels

5-Piece Quick Coupler Set

$67 00

Stock No. JSM-910K

$9 00

Stock No. JAS-14

$4 00

Stock No. JG-301

$3 00

Stock No. JSG-1063

$6 00

Stock No. JSG-2008

$4 00

Stock No. JST-712

$2 00

Stock No. JTC-828Z

• For use with all air operated equipment

• Quickly connect an assortment of air powered tools



NetPrice

Distr. Price

JST-712 dual Head tire Chuck 1 $5.00 $4.00Stock Number Description


NetPrice

Distr. Price

JAS-12 1/2" air Swivel 1 $26.00 $21.00JAS-14 1/4" air Swivel 1 $11.00 $9.00JAS-38 3/8" air Swivel 1 $11.00 $9.00



NetPrice

Distr. Price

JG-301 Mini oiler 1 $5.00 $4.00



NetPrice

Distr. Price

JSG-1063 air Blow Gun 1 $4.00 $3.00



NetPrice

Distr. Price

JSG-2008 5-Piece Quick Coupler Set 1 $8.00 $6.00



NetPrice

Distr. Price

JTC-828Z tire Chuck 1 $3.00 $2.00


• 1/4" NPt threads• 11 CFM tip• 8 CFM point tip




• Bidirectional 360º rotation air hose universal joint

• Keeps air hose straight and untwisted

• Increases maneuverability of air tool

• Solid brass construction 1/4" NPt threads

• automatic in-line oiler for small tools

• See-through reservoir shows when oil is needed



• Chrome-plated finish • Ideal for hard to reach valves • air pressure can be delivered at various angles

• Chrome-plated finish • Ideal for hard to reach valves • air pressure can be delivered at

various angles

AIR TOOLS - Accessories Industrial - AIR TOOLS


AIR TOOLS - Accessories Industrial - AIR TOOLS

Stock Number

Model Number

Wheel Size

(Dia x Bore x Thk/In)

Spindle Thread (IN/TPI)

Horse power

(HP)

Free Speed (RPM)

Air Press. (PSI)

NetPrice

Distr. Price

526340 AG-4S 4 x 5/8 x 1/4 3/8-24 3/4 10000 90 $323.00 $187.00526345 AG-4.5S 4-1/2 x 5/8 x 1/4 5/8-11 3/4 10000 90 $346.00 $200.00

AG Ergo Grip Angle Grinders

$187 00

Stock No. 526340

• Speed regulating governor maintains constant speed and torque control while grinding and prevents over-speed with free running

• Light weight composite body• Wheel guard adjusts to 9 different positions without tools• vibration absorbing handle allows longer use without operator fatigue

Square Drive Impact Wrenches

$126 00

Stock No. 505983

• unique pinless hammer provides for stability

• distinctive clutch design generates maximum power

• variable speed teasing throttle• Built-in regulator• Pistol grip style body• Muffled handle exhaust Stock

Number Model

Square Drive (in.)


Free Speed (RPM)

Overall Length

(in.)

Ship Weight

(lbs.)Carton Pack

NetPrice

Distr. Price

1/2" Square Drive Impact Wrenches505983 j-1700P 1/2 407 6500 7 7 1 $148.00 $126.00

3/4" Square Drive Impact Wrenches505972 j-2000P 3/4 550 5500 8-7/8 11 1 $446.00 $379.00505973 j-2000PL 3/4 550 5500 13-7/8 12 1 $457.00 $388.00505974 j-2000d 3/4 510 5500 12-3/16 13 1 $502.00 $427.00

1" Square Drive Impact Wrenches505941 jEt-1010 1 1250 4100 16-3/16 33 1 $659.00 $560.00505942 jEt-1010-E6 1 1250 4100 22-7/16 35 1 $696.00 $592.00505976 j-3800P 1 1400 4700 11-1/16 23 2 $772.00 $656.00505977 j-3800d 1 1400 4700 13 23 1 $782.00 $665.00505980 j-4500d 1 1700 3700 18-1/8 34 1 $998.00 $848.00

1-1/2" Square Drive Impact Wrenches505955 jEt-5000 1-1/2 3400 3000 16 34 1 $2,124.00 $1,805.00


Heavy-Duty Industrial Horizontal Grinders

• Powerful motor for superior performance• torque drive speed governor• Speed regulating valve maintains constant speed control

when grinding and prevents over-speed when free running• Ball bearing construction• Safety self-closing lever throttle

Stock Number Model

Wheel Size (in.)

Spindle Thread (TPI/in.)

Horse-Power

(HP)

Free Speed (RPM)

Overall Length

(in.)

Ship Weight

(lbs.)Net

PriceDistr. Price

526205 HG-2L 2 3/4-24 .9 11,000 14-1/4 4 $277.00 $235.00526207 HG-4L 4 5/8-11 1.3 7000 18-1/2 7 $457.00 $388.00


$235 00

Stock No. 526205


Air Drill

$499 00

Stock No. 556410

• Heavy-duty industrial quality 1/2" drill• “teasing” throttle• Compact design

Stock Number Model

Air Pressure

(psi)

Air Consumption


Air Hose (ID/in.)

Overall Length

(in.)

Ship Weight

(lbs.)Net

PriceDistr. Price

556410 Rd-12 90 30 1/4 1/2 12-1/2 9 $587.00 $499.00


Sand Rammers

$211 00

Stock No. 556631

• Light to medium-duty applications• Equipped with rubber butts

Stock Number Model

Butt Dia. (in.)

Bore & Stroke

(in.)

Overall Length

(in.)

Ship Weight

(lbs.) TypeNet

PriceDistr. Price

556631 jEt-00t 2 3/4 x 2 11 4 Bench $244.00 $211.00556632 jEt-0t 2 7/8 x 2-1/2 16 6 Bench $278.00 $240.00556633 jEt-1t 2-5/8 1 x 4 20 12 Bench $396.00 $342.00556634 jEt-2t 3 1-1/4 x 5 44 20 Floor $517.00 $447.00556606 jEt-06 5-3/4 1-1/2 x 5-1/2 49 37 Floor $713.00 $617.00


• Heavy-duty design• Replaceable front head bushing• drop-forged cylinder• Full control inside lever throttle

Stock Number Model

Ft / lbs per Blow (@90 PSI)

Air Cnsmpt. (CFM)

Air Inlet (NPT/

in.)

Air Hose

(ID/in.)

Overall Length

(in.)

Ship Weight (lbs.)

NetPrice

Distr. Price

550010 Cd-30-7/8 46 49 1/2 1/2 22 34 $806.00 $605.00550011 Cd-20-7/8 28 25 1/2 1/2 20-1/2 25 $713.00 $530.00550012 Cd-30-1 46 49 1/2 1/2 22 34 $806.00 $605.00


Clay/Trench Diggers

$530 00

Stock No. 550011

Rock Drills

$440 00

Stock No. 550020

• Latch type tooling retainer• t-style handle, with rubber grips• Forged steel parts• Heavy-duty ratchet and pawl

Stock Number Model

Hex Shank Size (in.)

Piston Diameter

(in.)

Piston Stroke

(in.)Chuck

Rotation

Free Speed (RPM)

NetPrice

Distr. Price

550020 Rd-7 5/8 1-1/2 1-1/2 LEFt 300 $616.00 $440.00550019 Rd-15-7/8 7/8 x 3-1/4 1-1/4 1-1/4 RIGHt 350 $889.00 $725.00550021 Rd-30-7/8 7/8 x 3-1/4 1-3/4 1-3/4 LEFt 250 $1,150.00 $820.00550024 Rd-60-7/8 7/8 x 3-1/4 2-9/16 2-9/16 LEFt 200 $1,405.00 $1,100.00550022 Rd-60-1 1 x 4-1/4 2-9/16 2-9/16 LEFt 200 $1,455.00 $1,100.00


AIR TOOLS - Industrial Industrial - AIR TOOLS


Paving Breakers

$635 00

Stock No. 550075

• Large diameter, smooth stroke piston• Full control throttle• Replaceable front head bushing• Four-bolt head-to-cylinder construction

Stock Number Model

Hex Shank

SiZe (in.)

Piston Diameter

(in.)

Piston Stroke

(in.)

Blows per

MInute

Air Pressure

(PSI)Net

PriceDistr. Price

550035 PB-30-1 1 x 4-1/4 1-3/4 3-3/8 1550 90 $784.00 $580.00550075 jPB-60-1-1/8 1-1/8 x 6 2-1/4 5 1400 90 $731.00 $635.00550076 jPB-60-1-1/4 1-1/4 x 6 2-1/4 5 1400 90 $731.00 $635.00550077 jPB-90-1-1/8 1-1/8 x 6 2-5/8 6-1/2 1250 90 $776.00 $665.00550078 jPB-90-1-1/4 1-1/4 x 6 2-5/8 6-1/2 1250 90 $776.00 $665.00


Rivet Busters

$720 00

Stock No. 550095K

• Hard hitting, powerful hammers for cutting off bolt and rivet heads

• May be used for heavy-duty chipping and nail driving applications

Stock Number Model

Tooling Size (in.)

Rivet Capacity

(in.)

Stroke Length

(in.)

Bore Size (in.)

Blows Per

Minute

Air Pressure

(PSI)Net

PriceDistr. Price

550095K RB-90 1 1-1/4 9 1-1/16 900 90 $926.00 $720.00550094K RB-91 1-1/8 1-1/4 9 1-1/16 900 90 $926.00 720.00550092K RB-90d 1 1-1/4 9 1-1/16 900 90 $926.00 $720.00550093K RB-91d 1-1/8 1-1/4 9 1-1/16 900 90 $926.00 $720.00550097 RB-110 1-1/8 1-1/4 11 1-1/16 680 90 $1,042.00 $875.00550100 RB-110d 1-1/8 1-1/4 11 1-1/16 680 90 $1,042.00 $875.00



Four Bolt Chipping Hammers

$285 00

Stock No. 557702

• Rubber coated trigger• d-handle for extra strength and better grip• Four-bolt handle design reduces handle

breakage

Stock Number Model

Shank Bushing

Style

Shank Bushing Size(in.)

Stroke Length

(in.)

Bore Size (in.)

Air Press. (PSI)

Overall Length

(in.)

Ship Weight (Lbs.)

Net Price

Distr. Price

557702 FBCH-2R RouNd .680 2-1/2 1-1/8 90 15-5/8 19 $373.00 $285.00557706 FBCH-2H HEX .580 2-1/2 1-1/8 90 15-5/8 19 $373.00 $285.00557703 FBCH-3R RouNd .680 3 1-1/8 90 16-5/8 20 $373.00 $285.00557707 FBCH-3H HEX .580 3 1-1/8 90 16-5/8 20 $373.00 $285.00557704 FBCH-4R RouNd .680 4-1/2 1-1/8 90 18-1/2 22 $376.00 $285.00

Castle Tooth Handle Chipping Hammers

$245 00

Stock No. 557901

• Ring valve type• drop-forged castle tooth style handle• Heavy-duty hammer provides hard-

hitting powerful blows

Stock Number Model

Shank Bushing

Style

Shank Bushing Size(in.)

Stroke Length

(in.)

Ft/lbs per Blow @ 90 PSI

Overall Length

(in.)

Ship Weight (Lbs.)

Net Price

Distr. Price

557901 jCo-1R-Rv Round .680 1 9 11 11 $307.00 $245.00557902 jCo-2R-Rv Round .680 2 18 12-3/4 13 $318.00 $245.00557906 jCo-2H-Rv Hex .580 2 18 12-3/4 13 $318.00 $245.00557903 jCo-3R-Rv Round .680 3 25 14-3/8 14 $331.00 $245.00557907 jCo-3H-Rv Hex .580 3 25 14-3/8 14 $331.00 $245.00557904 jCo-4R-Rv Round .680 4 42 14 15 $343.00 $245.00557908 jCo-4H-Rv Hex .580 4 42 16 15 $343.00 $245.00


AIR TOOLS - Industrial Industrial - AIR TOOLS


L-90 Series Hand Chain Hoists

• available with 10' to 30' lifts• Compact and portable for ease of positioning material• Engineered for commercial and industrial lifting

applications

Stock No. 101505

$10100

See page 140-141 of the 2006 Industrial Catalog, Stock No. 900898, for more information.

SMH Series Hand Chain Hoists

Stock No. 101700

$75 00

• Full range capacity 1/2- to 10-tons• Standard features found only in higher

priced models• Economical hand chain hoist designed for

years of trouble-free service• 10', 15', 20' and 30' lifts standard, custom

length lifts available• all steel construction with a durable

powder coat finish• Lightweight, compact design for low

headroom applications• Needle bearing supported load sheave

for smooth operation

See page 136, 137 of the 2006 Industrial Catalog, Stock No. 900898, for more information.

SMHX Series Hand Chain Hoists

Stock No. 121704

$90 00

Stock Number Model

Rated Capacity

(Ton)

Standard Lift (FT)

NetPrice

Distr. Price

1-ton Hand Chain Hoists121704 SMHX-1t-10 1 10 $129.00 $90.00 121706 SMHX-1t-20 1 20 $176.00 $123.00


3-ton Hand Chain Hoists121716 SMHX-3t-10 3 10 $28000 $196.00 121718 SMHX-3t-20 3 20 $363.00 $254.00



• 1-ton, 2-ton, 3-ton, and 5-ton units available• Standard features found only in higher priced models• Gradual slip clutch provides automatic overload

protection• designed for years of trouble-free service

Stock Number Model

Rated Capacity (Ton)

Standard Lift (FT)

Net Price

Distr.Price

1/2-ton Hand Chain Hoists101700 SMH-1/2ton-10' Lift 1/2 10 $94.00 $75.00 101701 SMH-1/2ton-15' Lift 1/2 15 $105.00 $84.00 101702 SMH-1/2ton-20' Lift 1/2 20 $134.00 $107.00 101703 SMH-1/2ton-30' Lift 1/2 30 $147.00 $118.00

1-ton Hand Chain Hoists101704 SMH-1ton-10' Lift 1 10 $107.00 $86.00 101705 SMH-1ton-15' Lift 1 15 $127.00 $102.00 101706 SMH-1ton-20' Lift 1 20 $146.00 $117.00 101707 SMH-1ton-30' Lift 1 30 $184.00 $147.00

1-1/2-ton Hand Chain Hoists101708 SMH-1-1/2ton-10' Lift 1-1/2 10 $137.00 $110.00 101709 SMH-1-1/2ton-15' Lift 1-1/2 15 $155.00 $124.00 101710 SMH-1-1/2ton-20' Lift 1-1/2 20 $177.00 $142.00 101711 SMH-1-1/2ton-30' Lift 1-1/2 30 $215.00 $172.00


3-ton Hand Chain Hoists101716 SMH-3ton-10' Lift 3 10 $234.00 $187.00 101717 SMH-3ton-15' Lift 3 15 $268.00 $214.00 101718 SMH-3ton-20' Lift 3 20 $305.00 $244.00 101719 SMH-3ton-30' Lift 3 30 $371.00 297.00


10-ton Hand Chain Hoists101724 SMH-10ton-10' Lift 10 10 $973.00 $778.00 101725 SMH-10ton-15' Lift 10 15 $1,073.00 $858.00 101726 SMH-10ton-20' Lift 10 20 $1,174.00 $939.00 101727 SMH-10ton-30' Lift 10 30 $1,378.00 $1,102.00

Stock Number Model

Rated Cap. (Ton)

Standard Lift (FT)

Net Price

Distr. Price

1/2-ton Hand Chain Hoists101505 L-90-1/2 ton-10' Lift 1/2 10 $126.00 $101.00 101305 L-90-1/2ton-15' Lift 1/2 15 $150.00 $120.00 101306 L-90-1/2ton-20' Lift 1/2 20 $180.00 $144.00 101307 L-90-1/2ton-30' Lift 1/2 30 $239.00 $191.00

1-ton Hand Chain Hoists101510 L-90-1ton-10' Lift 1 10 $141.00 $113.00 101310 L-90-1ton-15' Lift 1 15 $167.00 134.00 101311 L-90-1ton-20' Lift 1 20 $200.00 $160.00 101312 L-90-1ton-30' Lift 1 30 $268.00 $214.00

1-1/2-ton Hand Chain Hoists101515 L-90-1-1/2ton-10' Lift 1-1/2 10 $207.00 $166.00 101315 L-90-1-1/2ton-15' Lift 1-1/2 15 $254.00 $203.00 101316 L-90-1-1/2ton-20' Lift 1-1/2 20 $300.00 $240.00 101317 L-90-1-1/2ton-30' Lift 1-1/2 30 $354.00 $283.00

2-ton Hand Chain Hoists101520 L-90-2ton-10' Lift 2 10 $243.00 $194.00 101525 L-90-2ton-15' Lift 2 15 $290.00 $232.00 101320 L-90-2ton-20' Lift 2 20 $327.00 $262.00 101321 L-90-2ton-30' Lift 2 30 $408.00 $326.00



10-ton Hand Chain Hoists

101560 L-90-10ton-11-1/2' Lift 10 11-1/2 $1,369.00 $1,095.00

101565 L-90-10ton-20' Lift 10 20 $1,574.00 $1,259.00 101566 L-90-10ton-30' Lift 10 30 $1,850.00 $1,480.00

20-ton Hand Chain Hoists101090 L-90-20ton-20' Lift $5,353.00 $4282.00

MATERIAL HANDLING - Chain Hoists Lever Hoists - MATERIAL HANDLING


MATERIAL HANDLING - Chain Hoists Lever Hoists - MATERIAL HANDLING

JLP Series Lever Hoists

Stock Number Model


Standard Lift (FT)

Net Price

Distr. Price

1/4 Ton Lever Hoists187730 jLP-25-5 1/4 5 $80.00 $60.00

3/4 Ton Lever Hoists187705 jLP-50-5 1/2 5 94.00 $71.00 187706 jLP-50-10 1/2 10 $102.00 $77.00

3/4 Ton Lever Hoists187707 jLP-75-5 3/4 5 $134.00 $101.00 187708 jLP-75-10 3/4 10 $145.00 $109.00 187709 jLP-75-15 3/4 15 $152.00 $114.00 187710 jLP-75-20 3/4 20 $163.00 $122.00

1-1/2 Ton Lever Hoists187711 jLP-150-5 1-1/2 5 $171.00 $128.00 187712 jLP-150-10 1-1/2 10 $182.00 $137.00 187713 jLP-150-15 1-1/2 15 $197.00 $148.00 187714 jLP-150-20 1-1/2 20 $209.00 $157.00

3 Ton Lever Hoists n187715 jLP-300-5 3 5 $259.00 $194.00 187716 jLP-300-10 3 10 $280.00 $210.00 187717 jLP-300-15 3 15 $303.00 $227.00 187718 jLP-300-20 3 20 $320.00 $240.00

6 Ton Lever Hoists187719 jLP-600-5 6 5 $411.00 $308.00 187720 jLP-600-20 6 20 $962.00 $722.00

See page 142, 143 of the 2006 Industrial Catalog, Stock No. 900898, for more information.

• Economical lever hoist designed for years of trouble-free operation

• 1/4-ton to 6-ton capacities • 5’, 10’, 15’ and 20’ lifts standard, custom

length lifts available • all steel construction with a durable

powder coat finish • Completely enclosed Weston type

automatic brake system holds load in any position

• Easy-to-use with single hand operation and control

Stock Number Model


Standard Lift (FT)

NetPrice

Distr. Price

1-1/2 Ton Lever Hoists with Points Hooks287722 jLP-150-10SH 1-1/2 10 $207.00 $155.00 287723 jLP-150-15SH 1-1/2 15 $222.00 $167.00 287724 jLP-150-20SH 1-1/2 20 $234.00 $176.00

3 Ton Lever Hoists with Points Hooks287726 jLP-300-10SH 3 10 $305.00 $229.00 287727 jLP-300-15SH 3 15 $328.00 $246.00 287728 jLP-300-20SH 3 20 $345.00 $259.00

Stock No. 187625

$107 00

Mini-Mite Series Lever Hoists

• Compact size fits easily in a truck or toolbox

• a size for every need• Grade 100 chain for long term service• dependable, lightweight and portable

heavy-duty lever hoist for industrial applications

• 1/4-ton to 6-ton capacities

Stock Number Model


Standard Lift (FT)

NetPrice

Distr. Price

1/4-ton Lever Hoists187625 MM-25 1/4 3' 3" $133.00 $107.00 187626 MM-26 1/4 10 $152.00 $122.00

1/2-ton Lever Hoists187650 MM-50 1/2 5 $13400 $107.00 187651 MM-51 1/2 10 $153.00 $122.00 187652 MM-52 1/2 15 $176.00 $141.00 187653 MM-53 1/2 20 $199.00 $159.00

3/4-ton Lever Hoists187575 MM-75 3/4 5 $187.00 $150.00 187510 MM-751 3/4 10 $219.00 17500 187520 MM-752 3'4 15 $268.00 214.00 187519 MM-755 3/4 20 $244.00 $195.00

1-1/2-ton Lever Hoists187515 MM-150 1-1/2 5 $263.00 $210.00 187511 MM-151 1-1/2 10 $282.00 $226.00 187525 MM-155 1-1/2 15 $301.00 $241.00 187521 MM-152 1-1/2 20 $341.00 $273.00

3-ton Lever Hoists187530 MM-300 3 5 $389.00 $311.00 187531 MM-310 3 10 $425.00 $340.00 187535 MM-355 3 15 $486.00 389.00 187532 MM-320 3 20 $528.00 $422.00

6-ton Lever Hoists187560 MM-600 6 5 $679.00 $543.00 187562 MM-620 6 20 $919.00 $735.00


Stock No. 187206

$104 00

JTP Series Lever Hoists

• Lightweight, heavy-duty lever hoist features built-in automatic overload protection

• High strength to weight ratio• optional point hooks make this tool

indispensable in shipbuilding and fabricating applications


Stock Number Model


Standard Lift (FT)

NetPrice

Distr. Price

3/4-ton Lever Hoists With Overload Protection187206 jtP-75-5 3/4 5 $138.00 $104.00 187208 jtP-75-15 3/4 15 $156.00 $117.00

1-1/2-ton Lever Hoists With Overload Protection187215 jtP-150-5 1-1/2 5 $176.00 $132.00 187217 jtP-150-15 1-1/2 15 $202.00 $152.00

3-ton Lever Hoists With Overload Protection187230 jtP-300-5 3 5 $266.00 $200.00 187232 jtP-300-15 3 15 $311.00 $233.00

Lever Hoists with Point Hooks

Stock No.187707

$10100


Stock No. 225650

63 00

JPNX Series Lever Hoists

• Robust cast handle for the big jobs• Premium grade lever hoist designed for

commercial and industrial applications• 1/2-ton, 3/4-ton, 1-1/2-ton, and 3-ton models• 5', and 15' lifts standard, custom length lifts

available• 100 grade chain resists abrasion and wear• all steel construction with rugged one-piece

cast handle • Completely enclosed Weston type automatic

brake system for precise load spotting • Easy-to-use with single hand operation and

control • Simple design makes routine inspection and

maintenance easy • Freewheeling feature without load for quick

load attachment • Permanently lubricated gears under normal

operating conditions • Premium grade 100 low wear chain resists

abrasion • drop forged safety hooks swivel 360° for easy

rigging • Proof tested with test certificate • Complies with oSHa, aNSI/aSME B30.21 and

HSt-3 Standards

Stock Number Model


Standard Lift (FT)

NetPrice

Distr. Price

225650 jPNX-50-5 1/2 5 $84.00 $63.00225652 jPNX-50-15 1/2 15 $106.00 $80.00225675 jPNX-75-5 3/4 5 $138.00 $104.00225676 jPNX-75-15 3/4 15 $191.00 $143.00225615 jPNX-150-5 1-1/2 5 $220.00 $165.00225616 jPNX-150-15 1-1/2 15 $245.00 $184.00225630 jPNX-300-5 3 5 $266.00 $200.00225631 jPNX-300-15 3 15 $320.00 $240.00


Stock No. 275050

$122 00

JLH Series Lever Hoists

• 3/4 ton to 6 ton Capacities• available in 5ft, 10ft, 15ft, and 20ft

lifts standard, custom lifts available• Light weight, compact design for

low head room applications• all units feature premium 100

grade chain for extreme wear resistance

• Patented fused break disc design for low maintenance

• Caged roller bearings used on load sprocket increase ease of use and efficiency

Stock Number

Model Number


Standard Lift (FT)

NetPrice

Distr. Price

275050 jLH-80-5 .8 5 $135.00 $122.00 275010 jLH-80-10 .8 10 $146.00 $131.00 275015 jLH-80-15 .8 15 $153.00 $138.00 275020 jLH-80-20 .8 20 $165.00 $149.00

.8T Lever Hoists210050 jLH-100-5 1 5 $149.00 $134.00 210010 jLH-100-10 1 10 $159.00 $143.00 210015 jLH-100-15 1 15 $171.00 $154.00 210020 jLH-100-20 1 20 $182.00 $164.00

1.6T Lever Hoists215005 jLH-160-5 1.6 5 $172.00 $155.00 215010 jLH-160-10 1.6 10 $184.00 $166.00 215015 jLH-160-15 1.6 15 $199.00 $179.00 215020 jLH-160-20 1.6 20 $211.00 $190.00

2.5T Lever Hoists225005 jLH-250-5 2.5 5 $218.00 $196.00 225010 jLH-250-10 2.5 10 $233.00 $210.00 225015 jLH-250-15 2.5 15 $251.00 $226.00 225020 jLH-250-20 2.5 20 $26600 $239.00



jLH Series Lever Hoists .8t-1.6t

jLH Series Lever Hoists 2.5t-6.3t

MATERIAL HANDLING - Lever Hoists Chain Hoists - MATERIAL HANDLING



Net Price

Distr. Price

123100 1/2SS-3C-10, 1/2 ton, 3Ph, 10' Lift, 230/460v, Prewired 460v $948.00 $758.00 123150 1/2SS-3C-15, 1/2 ton, 3Ph, 15' Lift, 230/460v, Prewired 460v $982.00 $786.00 123200 1/2SS-3C-20, 1/2 ton, 3Ph, 20' Lift, 230/460v, Prewired 460v $1,021.00 $817.00 131000 1SS-3C-10, 1 ton, 3Ph, 10' Lift, 230/460v, Prewired 460v $1,043.00 $834.00 131500 1SS-3C-15, 1 ton, 3Ph, 15' Lift, 230/460v, Prewired 460v $1,078.00 $862.00 132000 1SS-3C-20, 1 ton, 3Ph, 20' Lift, 230/460v, Prewired 460v $1,119.00 $1,245.00 231000 2SS-3C-10, 2 ton, 3Ph, 10' Lift, 230/460v, Prewired 460v $1,316.00 $1,053.00 231500 2SS-3C-15, 2 ton, 3Ph, 15' Lift, 230/460v, Prewired 460v $1,382.00 $1,106.00 232000 2SS-3C-20, 2 ton, 3Ph, 20' Lift, 230/460v, Prewired 460v $1,438.00 $1,150.00 331000 3SS-3C-10, 3 ton, 3Ph, 10' Lift, 230/460v, Prewired 460v $1,728.00 $1,382.00 331500 3SS-3C-15, 3 ton, 3Ph, 15' Lift, 230/460v, Prewired 460v $1,813.00 $1,450.00 332000 3SS-3C-20, 3 ton, 3Ph, 20' Lift, 230/460v, Prewired 460v $1,897.00 $1,518.00 531000 5SS-3C-10, 5 ton, 3Ph, 10' Lift, 230/460v, Prewired 460v $2,261.00 $1,809.00 531500 5SS-3C-15, 5 ton, 3Ph, 15' Lift, 230/460v, Prewired 460v $2,389.00 $1,911.00 530200 5SS-3C-20, 5 ton, 3Ph, 20' Lift, 230/460v, Prewired 460v $2,517.00 $2,014.00

• designed for commercial and industrial applications

• 1/2-ton to 5-ton capacities, • 10', 15' and 20' lifts standard, custom

length lifts available • Slip clutch design overload protection


• 1/2-ton to 5-ton capacities, • 10' and 20' lifts available • Slip clutch design overload protection


• 1/2-ton to 5-ton capacities, • 10', 15' and 20' lifts available • Slip clutch design overload protection


NetPrice

Distr. Price

121100 1/2SS-1C-10, 1/2 ton, 1Ph, 10" Lift, 115/230v, Prewired 230v $1,063.00 $850.00 121150 1/2SS-1C-15, 1/2 ton, 1Ph, 15" Lift, 115/230v, Prewired 230v $1,1000.00 $880.00 121200 1/2SS-1C-20, 1/2 ton, 1Ph, 20" Lift, 115/230v, Prewired 230v $1,135.00 $908.00 111000 1SS-1C-10, 1 ton, 1Ph, 10" Lift, 115/230v, Prewired 230v $1,156.00 $925.00 111500 1SS-1C-15, 1 ton, 1Ph, 15" Lift, 115/230v, Prewired 230v $1,198.00 $958.00 112000 1SS-1C-20, 1 ton, 1Ph, 20" Lift, 115/230v, Prewired 230v $1,237.00 $990.00 211000 2SS-1C-10, 2 ton, 1Ph, 10" Lift, 115/230v, Prewired 230v $1,434.00 $1,147.00 211500 2SS-1C-15, 2 ton, 1Ph, 15" Lift, 115/230v, Prewired 230v $1,493.00 $1194.00 212000 2SS-1C-20, 2 ton, 1Ph, 20" Lift, 115/230v, Prewired 230v $1,556.00 $1,245.00 311000 3SS-1C-10, 3 ton, 1Ph, 10" Lift, 115/230v, Prewired 230v $1,785.00 $1,428.00 311500 3SS-1C-15, 3 ton, 1Ph, 15" Lift, 115/230v, Prewired 230v $1,927.00 $1,542.00 312000 3SS-1C-20, 3 ton, 1Ph, 20" Lift, 115/230v, Prewired 230v $2,006.00 $1,605.00 511000 5SS-1C-10, 5 ton, 1Ph, 10" Lift, 115/230v, Prewired 230v $2,373.00 $1,898.00 511500 5SS-1C-15, 5 ton, 1Ph, 15" Lift, 115/230v, Prewired 230v $2,503.00 $2,002.00


Net Price

Distr. Price

503100 1/2dS-3C-10, 1/2 ton, 3Ph, 10' Lift 230/460v Prewired 460v $1,181.00 $945.00 503200 1/2dS-3C-20, 1/2 ton, 3Ph, 20' Lift 230/460v Prewired 460v $1,236.00 $989.00 103100 1dS-3C-10, 1 ton, 3Ph, 10' Lift 230/460v Prewired 460v $1,227.00 $982.00 103200 1dS-3C-20, 1 ton, 3Ph, 20' Lift 230/460v Prewired 460v $1,307.00 $1,046.00 203100 2dS-3C-10, 2 ton, 3Ph, 10' Lift 230/460v Prewired 2460v $1,556.00 $1,245.00 203200 2dS-3C-20, 2 ton, 3Ph, 20' Lift 230/460v Prewired 460v $1,683.00 $1,346.00 303100 3dS-3C-10, 3 ton, 3Ph, 10' Lift 230/460v Prewired 460v $2,046.00 $1,637.00 303200 3dS-3C-20, 3 ton, 3Ph, 20' Lift 230/460v Prewired 460v $2,217.00 $1,774.00 531010 5dS-3C-10, 5 ton, 3Ph, 10' Lift 230/460v Prewired 460v $2,433.00 $1,946.00 532020 5dS-3C-20, 5 ton, 3Ph, 20' Lift 230/460v Prewired 460v $2,705.00 $2,164.00

Stock No. 121100

$850 00

Stock No. 123100

$758 00

Stock No. 503100

$945 00

Single-Speed Electric Chain Hoists, Single Phase

Single-Speed Electric Chain Hoists, Three Phase

Dual-Speed Electric Chain Hoists, Three Phase

MATERIAL HANDLING - Lever Hoists Chain Hoists - MATERIAL HANDLING

Shown with optional 4-button controller.


Stock No. 107004

$82 00

WRT Series Lever Hoists


NetPrice

Distr. Price

107004 WRt-2000 Wire Rope Hoist trolley $103.00 $82.00

Air Hoist Pendant Controls

Stock No. 105985

$408 00


• Fits models aH-25C, aH-50C, aH-100C• available in 6', 11', and 16' lengths for

retrofit in the field

Stock Number Model Length (ft.)

NetPrice

Distr. Price

105985 aHP-10 6 $510.00 $408.00 105987 aHP-20 16 $556.00 $444.80


Chain Buckets

Stock No. 105901

$114 00

Stock Number Model Description

Net Price

Distr. Price

105901 CB-a For all model 10' lifts $142.00 $114.00 105902 CB-B For aH-25C/50C to 39' and 100C to 19' $219.00 $175.00 105903 CB-C For aH-25C/50C to 65' and 100C to 32' $124.00 $192.00

• Rugged weatherproof vinyl construction

AH Series Pneumatic Hoists

Stock No. 105970

$1,403 00

• designed for commercial applications where air power is preferred

• 1/4-ton to 1-ton capacities• 10' and 20' lifts available

• Single or double line operation• Convenient push button control• Built in upper limit stop• Steel cable reel• Complies with oSHa,

aNSI/aSME B30, 16 aNd HSt-1 standards

• Single or double line operation• Convenient push button control• Built in upper limit stop• Steel cable reel• Complies with oSHa, aNSI/aSME B30, 16 aNd HSt-1 standards


Net Price

Distr. Price

105970 aH-25C-10, 1/4 ton 10' Lift $1,870.00 $1,403.00 105971 aH-50C-10, 1/2 ton 10' Lift $1,941.00 $1,456.00 105972 aH-50C-20, 1/2 ton 20' Lift $2,010.00 $1,508.00 105973 aH-100C-10, 1 ton 10' Lift $2,117.00 $1,588.00 105974 aH-100C-20, 1 ton 20' Lift $2,352.00 $1,764.00

See page 160, of the 2006 Industrial Catalog, Stock No. 900898, for more information.

MATERIAL HANDLING - Hoists Trolleys - MATERIAL HANDLING

Stock No. 107001

$66 00

WRH Series Lever Hoists


NetPrice

Distr. Price

107001 WRH-440 Wire Rope Hoist $83.00 $66.00 107002 WRH-880 Wire Rope Hoist $114.00 $91.00 107003 WRH-1320 Wire Rope Hoist $156.00 $125.00


Stock No. 252005

$40 00 Stock No. 252200

$1,900 00

Stock No. 262005

$34 00

PT Series Industrial-Duty Plain Trolleys AT Series Pneumatic Trolley

HDT Series Heavy-Duty Plain Trolleys

Stock Number Model

Capacity (ton)

Beam Flange Width

(in.)

Beam Height

(ft.)

Min. Radius Curve (in.)

Ship Weight

(lbs.)Net

PriceDistr. Price

252005 1/2 Pt 1/2 2-1/2 – 8 4 – 19 39 20 $53.00 $40.00 252010 1 Pt 1 3 – 8 4 – 19 39 34 $68.00 $51.00 252015 1-1/2 Pt 1-1/2 3-1/4 – 8 4 – 19 43 43 $105.00 $79.00 252020 2 Pt 2 3-1/4 – 8 4 – 19 43 52 $113.00 $85.00 252030 3 Pt 3 4 – 8 5 – 19 51 88 $244.00 $183.00 252050 5 Pt 5 4-5/8 – 8 5 – 19 55 124 $370.00 $278.00 252060 10 Pt 10 4-3/4 – 8 5 – 19 67 211 $732.00 $549.00

• designed for low maintenance and trouble-free operation through a wide range of beams

• For use with wide-flange H-beams, standard I-beams, or curved track

• Multiple spacer washers make beam flange width adjustment quick and easy

• 1/2-ton through 5-ton capacities• Multiple spacer washers make

beam flange wide adjustment quick and easy

• Hardened wheels with lubricated for life, double sealed ball bearings

Stock Number Model

Capacity (ton)

Beam Flange

Width (in.)

Beam Height

(in.)

Min. Radius

Curve (in.)

Ship weight (lbs.)

NetPrice

Distr. Price

262005 1/2-Hdt 1/2 2-1/2-8 3-24-1/2 35 12 $40.00 $34.00 262010 1-Hdt 1 3-8 5-24-1/2 39 18 $50.00 $43.00 262020 2-Hdt 2 3-1/4-8 6-24-1/2 43 32 $84.00 $71.00 262030 3-Hdt 3 4-8 8-24-1/2 51 53 $181.00 $154.00 262050 5-Hdt 5 4-5/8-8 10-24-1/2 55 90 $274.00 $233.00

See pages 151 of the 2006 Industrial Catalog, Stock No. 900894, for more information.


• air trolley comes equipped with 6' pendant control

• use with air hoists: aH-25C, aH-50C or aH-100C

Stock Number Model

Cap'y (lbs.)

Flange Width (in.)

(FPM)

Min. Beam Radius

(in.)

Air Pressure

(PSI)Headroom

(in.)

Net Weight

(lbs.)Net

PriceDistr. Price

252200 at-1000 2200 3 – 5 59 57, 70, 85 4-3/4 57 $2,235.00 $1,900.00



Stock No. 252205

$70 00

GT Series Industrial-Duty Geared Trolleys with Hand Chain

• Hand chain gear system provides precision load spotting through a wide range of beams

• For use with wide-flange H-beams, standard I-beams, or curved track

Stock Number Model

Cap’y (ton)

Chain Length

(ft.)

Beam Flange Width

(in.)

Beam Height

(in.)

Min. Radius

Curve Lift in.)

Ship Weight

(lbs.)Net

PriceDistr. Price

252205 1/2 Gt 1/2 8 3 – 6 4 – 19 39 32 $100.00 $70.00 252210 1 Gt 1 10 3-1/4 – 8 4 – 19 39 46 $133.00 $93.00 252220 2 Gt 2 10 3-1/2 – 8 4 – 19 43 64 $203.00 $142.00 252230 3 Gt 3 10 5– 8 5 – 19 51 108 $344.00 $241.00 252250 5 Gt 5 10 5 – 8 5 – 19 55 147 $48700 $341.00 252260 10 Gt 10 10 6 – 8 5 – 19 67 230 $1,106.00 $774.00


MATERIAL HANDLING - Hoists Trolleys - MATERIAL HANDLING

Stock No. 262605

$434 00

Electric Trolleys For 3PH & 1PH Electric Chain Hoists


Net Price

Distr. Price

3 Ph Electric Chain Hoists262605 1/2Et-3C, 1/2 ton, 3Ph, 230/460v, Prewired 230v $578.00 $434.00 262610 1Et-3C, 1 ton, 3Ph, 230/460v, Prewired 230v $607.00 $455.00 262620 2Et-3C, 2 ton, 3Ph, 230/460v, Prewired 230v $744.00 $558.00 262630 3Et-3C, 3 ton, 3Ph, 230/460v, Prewired 230v $827.00 $620.00 262250 5Et-3C, 5 ton, 3Ph, 230/460v, Prewired 230v $914.00 $686.00

1 Ph Electric Chain Hoists272705 1/2Et-1C, 1/2 ton, 1Ph, 115/230v, Prewired 115v $623.00 $467.00 272710 1Et-1C, 1 ton, 1Ph, 115/230v, Prewired 115v $665.00 $499.00 272720 2Et-1C, 2 ton, 1Ph, 115/230v, Prewired 115v $818.00 $614.00 272730 3Et-1C, 3 ton, 1Ph, 115/230v, Prewired 115v $910.00 $683.00 272750 5Et-1C, 5 ton, 1Ph, 115/230v, Prewired 115v $1,022.00 $767.00

• designed to give you single-control convenience

• Solenoid-operated traveling brake• adjustable to fit various size

I-beams and wide flange beams

Electric Trolly Push Button Controls For Electric Trolleys


Net Price

Distr. Price

Controls for Single Speed Electric Hoists152410 PBC-410C SS 4-Button Control Pendant For 10' Lift Hoist & trolley $54.00 $41.00 152415 PBC-415C SS 4-Button Control Pendant For 15' Lift Hoist & trolley $60.00 $45.00 152420 PBC-420C SS 4-Button Control Pendant For 20' Lift Hoist & trolley $66.00 $50.00 152610 PBC-610C SS 6-Button Control Pendant For 10' Lift Hoist & trolley $81.00 $61.00 152615 PBC-615C SS 6-Button Control Pendant For 15' Lift Hoist & trolley $89.00 $67.00 152620 PBC-620C SS 6-Button Control Pendant For 20' Lift Hoist & trolley $99.00 $74.00

Controls for Dual Speed Electric Hoists142410 dSPBC-410C dS 4-Button Control Pendant 10' Lift Hoist & trolley $112.00 $84.00 142415 dSPBC-415C dS 4-Button Control Pendant 15' Lift Hoist & trolley $121.00 $91.00 142420 dSPBC-420C dS 4-Button Control Pendant 20' Lift Hoist & trolley $130.00 $98.00 142610 dSPBC-610C dS 6-Button Control Pendant 10' Lift Hoist & trolley $161.00 $121.00 142615 dSPBC-615C dS 6-Button Control Pendant 15' Lift Hoist & trolley $171.00 $128.00 142620 dSPBC-620C dS 6-Button Control Pendant 20' Lift Hoist & trolley $180.00 $135.00

• Purchased separately, the control cables feature 2 or 4 push button stations

• Correct cable length is determined by the hoist lifting height

Stock No. 152410

$41 00

Shown with optional 4-button control


HD Series Heavy Duty Beam Clamps

Heavy-Duty Grip Pullers

JCP Series Cable Pullers

JCH Series Linesman pullers

JBC Series Industrial-Duty Beam Clamps

Stock No. 180410

$17 00

Stock No. 286515K

$242 00

Stock No. 181330

$64 00

Stock No. 252710

$38 00

Stock No. 202710

$31 00

• For construction, commercial and industrial vertical or horizontal rigging operations

• Mount hoists or lift beams with portable lightweight clamp

• adjusts with ease to fit a broad range of wide-flange H or standard I-beams

Stock Number Model

Rated Cap’y (lbs.)

Beam Flange Width (in.)

Ship Weight (lbs.)

Net Price

Distr. Price

252710 jBC-1 2,000 2-31/32 – 8-21/32 11 $51.00 $38.00 252720 jBC-2 4,000 2-31/32 – 8-21/32 12 $56.00 $42.00 252730 jBC-3 6,000 3-15/16 – 9-2/32 24 $88.00 $66.00 252750 jBC-5 10,000 4-15/16 –10-5/8 32 $99.00 $74.00

• 1-ton to 5-ton capacities• Mount hoists or lift beams

with portable light-weight clamp


• General purpose cable puller designed to lift, lower, stretch or pull heavy loads

• 1-ton to 4-ton capacities

Stock Number Model

Capacity (ton)

Lever Ratio

Maximum Lift (ft.)

Lever Length (in.)

Min. Distance Between Hooks (in.)

Ship Weight (lbs.)

Net Price

Distr. Price

180410 jCP-1 1 18:1 12 16-1/2 17 8.55 $22.00 $17.00 180420 jCP-2 2 36:1 5 16-1/2 21 9.05 $24.00 $18.00 180440 jCP-4 4 36:1 5 17-1/8 22 13.1 $28.00 $21.00


• Heavy-duty cable puller designed to lift, lower, stretch, or pull heavy loads• 1-1/2 and 2-ton capacities available• drop forged hooks with safety latches standard• Complies with aNSI/aSME B30.21 standards

Stock Number Model

Lever Ratio

Handle length

(in.)

Cable Length

(ft.)

Cable Diameter

(in.)

Shipping Weight

(lbs.)Net

PriceDistr. Price

General Line Specifications181330 jCH-3 9.47:1 25-1/4 30 1/4 14-1/2 $80.00 $64.00 181420 jCH-4 11.79:1 29-7/8 20 1/4 16 $85.00 $68.00



• Industrial quality grip puller designed to lift, lower, or pull heavy loads

• 3/4-ton to 3-ton capacities• Easy-to-use in any direction, angle, or length of

pull or lift


NetPrice

Distr. Price

286575K jG-75a 3/4t Wire Rope Grip Puller with Cable $250.00 $188.00 286515K jG-150a 1-1/2t Wire Rope Grip Puller with Cable $322.00 $242.00 286530K jG-300a 3t Wire Rope Grip Puller with Cable $450.00 $338.00

Stock Number Model

Rated Cap’y (lbs.)

Beam Flange Width (in.)

Ship Weight (lbs.)

NetPrice

Distr. Price

202710 Hd-1t 2,000 3 – 8-5/8 11 $36.00 $31.00 202720 Hd-2t 4,000 3 – 8-5/8 13 $41.00 $35.00 202730 Hd-3t 6,000 3-1/8 – 10-5/8 20 $63.00 $54.00 202750 Hd-5t 10,000 3-1/8 – 10-5/8 24 $71.00 $60.00

MATERIAL HANDLING - Clamps / Pullers Accessories - MATERIAL HANDLING


Flat Eye Twisted Eye Web Slings

Twisted Eye Web Slings

Drum Tongs

Drum Lifter

Manual Drum Lifter/Dispenser

Stock No. 262003

$13 00

Stock No. 252300

$10 00

Stock No. 252330

$10 00



• Ideal for use with hoisting and rigging irregular or bulky loads

• Lightweight, flexible and easy-to-handle• Heavy-duty 2-ply polyester webbing• Red color warning core provides easy-to-notice

warning for sling replacement• tapered eyes are reinforced to resist abrasion• type 3 (flat eye) or type 4 (twisted eye) slings

available• Proof tested with test certificate• Complies with oSHa and aNSI/aSME B30.9

standards

• Ideal for use with hoisting and rigging irregular or bulky loads

• Lightweight, flexible and easy-to-handle• Heavy-duty 2-ply polyester webbing• Red color warning core provides easy-to-notice

warning for sling replacement• tapered eyes are reinforced to resist abrasion• type 3 (flat eye) or type 4 (twisted eye) slings

available• Proof tested with test certificate• Complies with oSHa and aNSI/aSME B30.9 standards

Stock Number Model

Width (in.)

Length (in.)

Capacity (lbs.)

Vertical Choker Basket

Ship Weight

(lbs.)Net

PriceDistr. Price

252300 WSFE-2-6 2 6 6400 5000 12,800 2 $16.00 $10.00 252301 WFSE-2-8 2 8 6400 5000 12,800 3 $36.00 $13.00 252302 WSFE-2-10 2 10 6400 5000 12,800 4 $42.00 $15.00 252310 WSFE-3-6 3 6 8600 6900 17,200 3 $47.00 $17.00 252311 WSFE-3-8 3 8 8600 6900 17,200 4 $56.00 $20.00 252312 WSFE-3-10 3 10 8600 6900 17,200 5 $67.00 $24.00 252320 WSFE-4-8 4 8 11,500 9200 23,000 5 $80.00 $29.00 252321 WSFE-4-10 4 10 11,500 9200 23,000 6 $91.00 $33.00 252322 WSFE-4-12 4 12 11,500 9200 23,000 7 $102.00 $36.00

Stock Number Model

Width (in.)

Length (in.)

Capacity (lbs.)

Vertical Choker Basket

Ship Weight

(lbs.)Net

PriceDistr. Price

252330 WStE-2-6 2 6 6,400 5,000 12,800 2 $16.00 $10.00 252331 WStE-2-8 2 8 6,400 5,000 12,800 3 $20.00 $13.00 252332 WStE-2-10 2 10 6,400 5,000 12,800 3 $23.00 $15.00 252340 WStE-3-6 3 6 8,600 6,900 17,200 3 $26.00 $17.00 252341 WStE-3-8 3 8 8,600 6,900 17,200 4 $31.00 $20.00 252342 WStE-3-10 3 10 8,600 6,900 17,200 5 $37.00 $24.00 252350 WStE-4--8 4 8 11,500 9,200 23,000 6 $44.00 $29.00 252351 WStE-4-10 4 10 11,500 9,200 23,000 6 $50.00 $33.00 252352 WStE-4-12 4 12 11,500 9,200 23,000 8 $56.00 $36.00


Capacity (lbs)

Net Weight (lbs)

NetPrice

Distr. Price

262001 Manual drum tongs 1000 7 $16.00 $12.00 262002 Locking drum tongs 1000 17 $41.00 $31.00

• 1000 lb capacity• For lifting 55 gallon drums

with overhead hoist• all steel construction

Stock No. 262001

$12 00

Stock No. 262004

$137 00

• 770 lb capacity• For lifting 55 gallon drums that

have a top lip, ring or chime


Capacity (lbs) Net Weight (lbs)

NetPrice

Distr. Price

262003 drum Lifter 770 20 $18.00 $13.00

• For 55 gallon closed steel drums • 800 lb capacity for full drums • Ideal for low level pouring and dumping

operations • When tilt lock is released, the drum can be

rotated 360º either direction • tilt lock can hold drum in horizontal position


List Price

Distr. Price

262004 Manual drum Lifter / dispenser 800 lb Capacity $183.00 $137.00

MATERIAL HANDLING - Clamps / Pullers Accessories - MATERIAL HANDLING

Geared Drum Lifter/Dispenser

• For 55 gallon closed steel drums • 800 lb capacity for full drums • Ideal for low level pouring and dumping

operations • When tilt lock is released, the drum can be

rotated 360º either direction • tilt lock can hold drum in horizontal position• Features chain control and low effort for

ease of use at any height


NetPrice

Distr. Price

262007 Geared drum Lifter / dispenser 800 lb Capacity $260.00 $195.00

Stock No. 262007

$195 00

Drum Chain Sling• designed to be used with hoists • Can be used on steel drums with or

without a lid

Stock Number Description Single Double Net Weight (lbs)

NetPrice

Distr. Price

262006 drum Chain Sling 1100 2200 49 $41.00 $31.00

Stock No. 262006

$31 00


Stock No. 140016

$194 00

Stock No. 140091

$204 00

Stock No. 140070

$214 00

J Series Pallet Trucks JTX Series Pallet Truck

Four Way Pallet Truck

Electric High Lift Pallet Trucks

PTX Series Pallet Trucks

W Series Pallet Trucks

• 5,000 pound capacity• High quality welded steel construction

with a durable powder coat finish• 2-1/2" low profile design for smaller

size pallet openings


Ship Weight (lbs.)

Net Price

Distr. Price

140016 Pt-1636j, 16"x36" Forks 135 $286.00 $194.00 140085 Pt-2036j, 20"x36" Forks 204 $286.00 $194.00 140084 Pt-2042j, 20"x42" Forks 177 $286.00 $194.00 140083 Pt-2048j, 20"x48" Forks 167 $286.00 $194.00 140082 Pt-2736j, 27"x36" Forks 204 $286.00 $194.00 140081 Pt-2742j, 27"x42" Forks 204 $286.00 $194.00 140080 Pt-2748j, 27"x48" Forks 204 $286.00 $194.00

• 5,500 lb. capacity• 2-1/2" lowered height• 210° turning radius


Ship Weight (lbs.)

NetPrice

Distr. Price

140091 PtX-2048, 20"x48" Pallet truck 167 $296.00 $204.00 140092 PtX-2036, 20"x48" Pallet truck 167 $296.00 $204.00 140093 PtX-2748, 20"x48" Pallet truck 284 $296.00 $204.00

Stock Number Model

Ship Weight (lbs.)

NetPrice

Distr. Price

140070 Pt-2036W, 20"x36" Forks 190 $317.00 $214.00140071 Pt-2042W, 20"x42" Forks 190 $317.00 $214.00140072 Pt-2048W, 20"x48" Forks 190 $317.00 $214.00140073 Pt-2736W, 27"x36" Forks 190 $317.00 $214.00140074 Pt-2742W, 27"x42" Pallet truck 189 $317.00 $214.00140075 Pt-2748W, 27"x48" Pallet truck 200 $317.00 $214.00

• 6,000 pound capacity• 200º turning radius allows room to

maneuver in tight quarters• articulating 7" poly-over-aluminum

steer wheels ensure continual contact with uneven floors

• 8,000 pound capacity• one-piece cast pump features high quality seals,

hardened and chrome plated ram and piston, top-of stroke and overload bypass valves


Ship Weight (lbs.)

NetPrice

Distr. Price

140800 jtX-2748, 27"x48", 8,000lb Capacity Pallet truck 285 $343.00 $239.00

Stock No. 140800

$239 00

Stock No. 140033

$240 00

Stock No. 140090

$1,248 00

• 5,000 pound capacity• High quality welded steel construction with

a durable powder coat finish• 2-1/2" low profile design for smaller

size pallet openings


Ship Weight (lbs.)

NetPrice

Distr. Price

140033 Pt-3348j, 33"x48" Forks 207 $317.00 $240.00

• designed to lift and transport skids or open-style pallets with push-button ease

• doubles as a mobile work station to reduce fatigue and lifting injuries

• Heavy-gauge steel frame with tough powder coat finish

• Features dependable Monarchmin-hydraulic pump system

• automatic overload bypass provides extra pump protection

Stock Number Model

Cap. (lbs.)

Min.Fork Height

(in.)

Max.Fork Height

(in.)

Overall Fork Dim. (LxW/in.)

Ship Weight

Each (lbs.)Net

PriceDistr. Price

140090 EHPt-2745 2,200 3-1/4 31-1/2 45 x 26-3/4 376 $1,468.00 $1,248.00


NetPrice

Distr. Price

140095 SP-2745 Steel Platform for EHPt-2745 $26.00 $21.00






Optional Accessories


MATERIAL HANDLING - Warehouse / Dock Warehouse / Dock - MATERIAL HANDLING



HLPT Series High Lift Pallet Trucks JWS Series Winch Stackers

APT Series Aluminium Platform Carts

JHS Series Hydraulic Stacker

Stock No. 140088

$409 00

Stock No. 140521

$706 00

Stock No. 140501

$407 00

Stock No. 140028

$200 00

• designed to lift and transport skids or open-style pallets with ease

• Great for use as a mobile work station to reduce lifting injuries

• Heavy-duty steel frame with tough powder coat finish

Stock Number Model

Capacity (lbs.)

Minimum Height

(in.)

Maximum Height

(in.)

Overall Fork Dim. (LxW/in.)


NetPrice

Distr. Price

140088 HLPt-2745 2,200 3-3/8 32 45 x 27 248 $454.00 409.00


NetPrice

Distr. Price

140095 SP-2745 Steel Platform for HLPt-2745 $26.00 $21.00

Stock Number Model

Cap'y (lbs.)

Pallet Cap'y (LxW/

in.)

Load Center

(in.)

Max.Lift Height

(in.)

Ship Weight

(lbs.)Net

PriceDistr. Price

140521 jHS-2200 2200 48x40 20 59 568 $883.00 $706.00


NetPrice

Distr. Price

140523 SP-2200, optional Steel Platform, Fits jHS-2200 $26.00 $21.00

• Simple, easy way to lift, lower and transport heavy loads with minimum effort

• Heavy-duty welded steel frame with a durable powder coat finish

• Low effort hand winch equipped with automatic brake system and adjustable length handle

• Easy to maneuver with large diameter swivel casters

• Swivel casters feature foot brake to prevent movement

• adjustable width forks provide versatility• jWS-770 features adjustable leg widths• adjustable width forks

and outrigger legs handle all pallet sizes


NetPrice

Distr. Price

140503 SP-770, optional Steel Platform, Fits jWS-770 $26.00 $21.00



Cap'y (lbs.)

Pallet Cap'y

(LxW/in)

Load Center

(in.)

Max. Lift Height

(in.)

Ship Weight

(lbs.)Net

PriceDistr. Price

140501 jWS-770 adjustable Legs 770 48x40 18 59 268 $479.00 $407.00

• Lightweight, corrosion-resistant aluminium platform trucks are built for heavy-duty use

• Box style frame is made of high strength welded aluminium channel• Corner sockets at both ends allow handles to be used on either side of

the truck

Stock Number Model

Cap'y (lbs.)

Platform Size (in.)

Platform Height

(in.)

Handle Height

(in.)

Caster Size (in.)

Shipping Weight

(lbs.)Net

PriceDistr. Price

140028 aPt-2448 2000 24x48 9 35.8 5x2 56.1 $250.00 200.00 140029 aPt-3060 2000 30x60 9 35.8 5x2 72.6 $300.00 $240.00






Shown with optional platform


• Economical and ergonomic way to handle standard 40" x 48" pallets

• Works like a manual forklift to load or unload trucks or stock shelves

• Heavy-duty welded steel frame with a durable powder coat finish

• Powerful two-stage hydraulic pump features quick-lift with no load, top-of-stroke and safety overload bypass system

• Heavy-duty dual roller chain with exceptional strength

• Swivel casters feature foot brake to prevent movement


Fold Down Platform Carts

PUC Series heavy-duty Resin service carts

SC Series Service Carts

Hardwood Dollies

Steel Drum Dollies

JDP Series Piano Dolly

Stock No. 140021

$40 00

Stock No. 140100

$20 00

Stock No. 140018

$74 00

Stock No. 140023

$39 00

• Heavy gauge steel construction with large nonskid platform

• Ideal for transporting loads up to 660 pounds around the shop or office

• vinyl perimeter bumper protects walls, doorways, furniture, etc.

• Folding handle for compact storage• Smooth rolling 5" hard rubber

casters, two swivel and two fixed on FdPt-660

• Large 8" pneumatic casters, two swivel and two fixed, for handling delicate items or rolling over rough surfaces on FdPt-660P

Stock Number Model

Cap’y (lbs.)

Platform Size

(WxL/in.)

Handle Height

(in.)

Wheel Size (in.)

Wheel Type

Ship Weight

Each (lbs.)

NetPrice

Distr. Price

140021 FdPt-660 660 24 x 36 34-1/4 5 Rubber 58 $49.00 $40.00 140022 FdPt-660P 660 24 x 36 37-3/4 8 Pneumatic 73 $74.00 $59.00

• Heavy-duty resin construction resists dents, chips, and rust

• Handle has built in storage bins• Round corners mean no sharp

edges to nick walls or furniture• Large, quiet, non-marking

5" casters

Stock Number Model

Max. Cap'y (lbs.)

Shelf Size (in.)

Upper Shelf

Height (in.)

Lower Shelf

Height (in.)

Shipping Weight

(lbs)Net

PriceDistr. Price

140018 PuC-3117 550 31-1/8x17-1/8 33-1/2 6 40 $93.00 $74.00 140019 PuC-3725 550 37-3/8x25-5/8 33-1/2 6 42 $119.00 $95.00

See page 178, of the 2006 Industrial Catalog, Stock No. 900898, for more information.

• 3-1/2" deep metal trays are reversible and hold up to 250 pounds each

• Rugged, metal trays have rolled edge for added strength

• 14 gauge support brackets; 20 gauge trays

Stock Number Model

Cap’y (lbs.)

Tray Size (WxLxD/in.)

Overall Height

(in.)

Ship Weight

(lbs.)Carton Pack

Net Price

Distr. Price

140023 SC-1630 500 16 x 30 x 3-1/2 32 36 1 $49.00 $39.00 140024 SC-2436 500 24 x 36 x 3-1/2 32 50 1 $57.00 $46.00


• use jEt® hardwood dollies for moving furniture, bulky crates and many other items

• Kiln dried oak used to prevent warping or shrinkage

Stock Number Model Bed Type

Size (LxW/in.)

Ship Weight (lbs.)

Carton Pack

NetPrice

Distr. Price

140100 WdF-2416 Flush End 24 x 16 16 1 $2400 $20.00 140101 WdF-3018 Flush End 30 x 18 20 1 $26.00 $22.00 140103 WdS-2416 Solid top 24 x 16 19 1 $30.00 $26.00 140104 WdS-3018 Solid top 30 x 18 25 1 $31.00 26.00 140105 WdS-3624 Solid top 36 x 24 30 1 $35.00 $30.00 140106 WdC-3018 Carpet End 30 x 18 17 1 $23.00 $20.00 140107 WdC-3624 Carpet End 36 x 24 21 1 $26.00 $22.00 140108 WdR-3018 Rubber End 30 x 18 19 1 $27.00 $23.00



• Strong and durable dollies easily transport up to 55 gallon drums

• Welded steel frame with 3-1/8" cross straps features powder coat finish


Ship Weight

(lbs.)Net

PriceDistr. Price

140120 dd-30, 30 Gallon, 770-lb. Capacity 18 $23.00 $18.00 140121 dd-55, 55 Gallon, 900-lb. Capacity 21 $26.00 $21.00


Stock No. 140120

$18 00

• Ideal for moving heavy appliances, carpet rolls, furniture, bulky crates, piano, etc.

• Includes two sealed hardware dollies

• Four nylon web straps are provided to secure cargo

Stock Number Model

Pair Cap'y (lbs.)

Max. Lift (in.)

Nose Plate Size

(WxDxT/in.)

Overall Dimensions

(WxLxH/in.)

Net Weight

(lbs.)Net

PriceDistr. Price

140115 jdP-1000 1,000 2-3/4 23-1/8 x 4-1/8x1/8 23x18x32 52 $162.00 $95.00


Stock No. 140115

$95 00



See page 181 of the 2006 Industrial Catalog, Stock No. 900898 for more information.

See page 181 of the 2006 Industrial Catalog, Stock No. 900898 for more information.


• Lift, position and transport heavy loads with ease• Heavy-duty steel frame and extra large table surface• Easy-to-use hydraulic foot pump features safety overload and top-of-stroke

bypass protection• Quick lifting action with no load• Convenient patent pending pump release handle • Easy rolling poly over nylon casters, two swivel and two fixed• Foot operated parking brake prevents movement

• Ideal for lifting, positioning and transporting heavy materials around the shop, factory, warehouse or office

• Ergonomic answer to preventing back injuries• Heavy-duty steel frame and table• Smooth rolling poly over nylon casters, two swivel and two fixed with parking

brake• SLt-1650 model features rugged poly over steel casters• Easy-to-use hydraulic foot pump raises table to multiple heights• Quick lifting action with no load• Safety overload and top-of-stroke bypass system provides maximum pump

protection• SLt-330F and SLt-660F models feature fold-down handles

SLT Series Scissor Lift Tables

DSLT Series Double Scissor Lift Table

SLT Series Jumbo Scissor Lfit Table

Stock No. 140771

$174 00

Stock No. 140778

$365 00

Stock No. 140780

$399 00

Stock Number Model

Cap’y (lbs.)

Max. Height (in.)

Min. Height (in.)

Table Length (in.)

Table Width (in.)


Handle Height (in.)

No. of strokes to reach

max. height

Ship Weight

(lbs.)Net

PriceDistr. Price

140771 SLt-330F 330 28-3/4 8-5/8 27-1/2 17-3/4 36 34-1/8 16 91 $218.00 $174.00 140777 SLt-660F 660 32-3/8 10-5/8 32-1/2 19-5/8 40-1/2 37-13/16 13 158 $384.00 $265.00 140779 SLt-1650 1650 38-5/8 16 39-3/8 20-1/8 52-1/2 38-1/2 15 243 $494.00 $355.00

• Ergonomic answer to preventing back injuries• Heavy-duty steel frame and table• Smooth rolling poly over nylon casters, two swivel and two fixed, with parking brake• Easy-to-use hydraulic foot pump raises table to multiple heights• Quick lifting action with no load• Safety overload and top-of-stroke bypass system provides maximum pump protection

Stock Number Model

Cap’y (lbs.)

Min. Height (in.)

Max. Height (in.)

Table Length (in.)

Table Width (in.)


Strokes to Reach Max. Height (in.)

Handle Height

(in.)Ship

Weight (lbs.)Net

PriceDistr. Price

140778 dSLt-770 770 13-9/16 51-1/8 35-5/8 20-1/8 45-3/4 21 37-1/4 235 $530.00 $365.00

Stock Number Model

Cap’y (lbs.)

Min. Table Height

(in.)Max. Table Height (in.)

Table Size (LxWxH/in.)


Strokes to Reach Max. Height

(in.)Handle Height

(in.)

Ship Weight

(lbs.)Net

PriceDistr. Price

140780 SLt-1100 1,100 11-1/8 36 63 x 31-1/2 x 2 73-1/2 33 37 292 $499.00 $399.00



TSLT Series Tilting Scissor Lift Table

Load Binders

Barrel Pumps

Pallet Pullers

RSA Series Ratchet Straps

Stock Number Model

Cap’y (lbs.)

Min./Max. Table Front Height

(in.)

Min./Max. Table Back Height

(in.)Table Size

(LxWxH/in.)Max. Table Tilt

(deg.)Overall

Length (in.)Strokes to Reach Max. Height (in.)

Handle Height (in.)

Ship Weight

(lbs.)Net

PriceDistr. Price

140770 tSLt-770 700 17-1/8 / 39 17-1/8 / 61 36 x 24 x 1-3/4 45 48 23 37-5/8 298 $473.00 $365.00

• Combines lifting, tilting and transporting in a single unit to provide easy access to parts bins, tote boxes, etc.• Helps reduce bending and lifting injuries • Heavy-duty steel frame and table• Easy-to-use hydraulic foot pump features safety overload and top-of-stroke bypass protection• Quick lifting action with no load• Large steel retaining lip secures load during operation• Convenient patent pending pump release handle• Easy rolling poly over nylon casters, two swivel and two fixed• Foot operated parking brake on swivel casters

• drop-forged, heat-treated alloy steel construction

• take up slack and secure chain around cargo in one operation

Stock Number Model

Min./Max. Chain Size

(in.)

Handle Length

(in.)Take-Up

(in.)

Working Load Limit

(lbs.)

Ship Weight

(lbs.)Net

PriceDistr. Price

583246 LB-8 3/16 / 1/4 11-7/8 2-3/4 2600 4 $15.00 $8.00 583245 LB-19 5/16 / 3/8 15-3/4 4 5400 9 $18.00 $12.00 583247 LB-28 3/8 / 1/2 18-1/2 4 9200 12 $27.00 $19.00 583248 RLB-19 5/16 / 3/8 14 8 5400 11 $30.00 $20.00


• For dispensing gasoline, diesel fuel, kerosene, machine oil, transmission fluid, hydraulic fluid, and similar light petroleum based products

• Strong die cast aluminum construction

Stock Number Model

Ship Weight (lbs.)

Net Price

Distr. Price

140031 dHP-001 diaphragm Hand Pump 15 $102.00 $82.00



Stock No. 140770

$365 00

Stock No. 583246

$8 00

Stock No. 583230

$9 00

Stock No. 140031

$82 00

Stock No. 140001

$33 00

• Heavy-duty, solid steel pallet pullers are designed to pull pallets across a smooth floor

• Heat treated, carbon steel teeth

Stock Number Model Ship Weight (lbs.)Net

PriceDistr. Price

140001 PaPL-1, 1 ton 13 $41.00 $33.00 140002 PaPL-2, 2 ton 22 $95.00 $71.00



Stock Number Model

Working Load Limit

(lbs.)

Break Strength

(lbs.)Hook Type

Web Strap Width

(in.)

Web Strap

Length (ft.)

Fixed Strap

Length (in.)

Ship Weight

(lbs.)Net

PriceDistr. Price

583230 RSa-6F 2000 6000 Flat 2 27 18 6 $12.00 $9.00 583231 RSa-10F 3300 10,000 Flat 2 27 18 7 $15.00 $12.00 583232 RSa-6j 2000 6000 j 2 27 18 6 $12.00 $9.00 583233 RSa-10j 3300 10,000 j 2 27 18 7 $15.00 $12.00

• designed to hold loads in place on trucks, rail cars, ships and other freight carriers

• Easy to attach and remove with 18" fixed length

• Heavy-duty quick-action ratchet draws strap tight over the load

• Strap is weather resistant, low stretch 2-ply polyester

• Red color core provides warning that strap is damaged and must be replaced

• Zinc coated steel components to inhibit rust

• Flat hook or j-hook style available

MATERIAL HANDLING - Warehouse / Dock Warehouse / Dock / Winches - MATERIAL HANDLING


MATERIAL HANDLING - Warehouse / Dock Warehouse / Dock / Winches - MATERIAL HANDLING

Single Sheaves

Snatch Blocks

Stock No. 302903

$19 00

Stock No. 303103

$4 00

Stock Number

Size (in.)

Capacity (ton)

Wire Rope Dia (in.)

Net Weight (lbs.)

NetPrice

Distr. Price

302903 3 Single 1/2 5/16 5 $24.00 $19.00 302904 4 Single 3/4 3/8 9 $32.00 $26.00 302905 5 Single 1-1/2 1/2 15 $44.00 $35.00 302906 6 Single 2-1/2 5/8 24 $66.00 $53.00 302908 8 Single 4 3/4 34 $127.00 $102.00 303003 3 double 1/2 5/16 8 $32.00 $26.00 303004 4 double 3/4 3/8 16 $45.00 $36.00 303005 5 double 1-1/2 1/2 25 $68.00 $54.00 303006 6 double 2-1/2 5/8 41 $102.00 $82.00 303008 8 double 4 3/4 89 $163.00 $130 .00

• For light service use• Cast iron single or double sheave• drop forged hook with safety latch• Bronze bushings

Stock Number

Size (in.)

Bore (in.)

Capacity (ton)

Wire Rope Dia. (in.)

Net Wt. (lbs.)

NetPrice

Distr. Price

303103 3 1/2 1/2 5/16 1 $5.00 $4.00 303104 4 5/8 3/4 3/8 2 $7.00 $5.00 303105 5 3/4 1-1/2 1/2 4 $9.00 $7.00 303106 6 1-1/8 2-1/2 5/8 6 $14.00 $11.00

• Cast iron for long life• Brass sleeve bearings• Ball type oiler

• Engineered for dependable, quiet and trouble-free operation

• 1200-lb to 20,000-lb capacities• Hermetically sealed gear and brake

sections provide superb protection from dust and weather

• Ratchets in and out with patent pending no load free-wheeling feature

• double-tipped brake pawl system for constant engagement

JWF Heavy-Duty Industrial Winches


NetPrice

Distr. Price

181041 IWF-100N, 1/2 ton Horizontal Capacity $204.00 $163.00 181042 IWF-300N, 1-1/2 ton Horizontal Capacity $322.00 $258.00 181043 IWF-500N, 2-1/2 ton Horizontal Capacity $339.00 $271.00 181044 IWF-1000N, 5-1/2 ton Horizontal Capacity $422.00 $338.00 181045 IWF-2000N, 11 ton Horizontal Capacity $538.00 $430.00 181046 IWF-3000N, 16-1/2 ton Horizontal Capacity $989.00 $791.00

Stock No. 181041

$163 00

• designed for mounting in almost any position• unit comes complete with 24 foot power

harness that connects to the winch switch

• Mounted switch can be operated with remote lanyard

• Power-in and power-out• Self-locking gearbox

12V Electric Winches

Stock No. 182010

$186 00


NetPrice

Distr. Price

182010 EW-20a, 12v, 5/32" x 25' Cable, 1,000-lb. Capacity $232.00 $186.00 182085 EW-30a, 12v, 7/32" x 40' Cable, 3,000-lb. Capacity $322.00 $258.00 182077 EW-60a, 12v, 7/32" x 50' Cable, 4,000-lb. Capacity $501.00 $401.00


See page 168 of the 2006 Industrial Catalog, Stock No. 900894, for more information.See page 165 of the 2006 Industrial Catalog, Stock No. 900894, for more information.

Yarding Blocks

Stock No. 313504

$27 00

• Fast and strong for light-duty, high-speed applications

• High carbon steel sheave• Lifetime lubricated sealed ball bearings

Stock Number Model

Capacity (ton)

Wire Rope Dia (in.)

Net Weight (lbs.)

NetPrice

Distr. Price

313504 YB-4 1 3/8 4 $34.00 $27.00 313505 YB-5 1-1/2 1/2 9 $57.00 $46.00 313506 YB-6 2 9/16 13 $79.00 $63.00


115V Electric Winch

Stock No. 182080

$331 00


NetPrice

Distr. Price

182080 EW-10, 115v, 5/32" x 45' Cable, 1,000-lb. Capacity $414.00 $331.00

• Compact winch is designed to operate on standard 115v house current up to 10 amp draw

• Full power-in and power-out• dynamic and automatic full-load

mechanical brake• 6' industrial type pendant control• Permanently lubricated gearbox

requires no lubrication• Equipped with pulley block to double

pulling capacity, extend winch and wire rope life.




GPW Series General Purpose Winches

Stock No. 181000

$17 00

Stock Number Model

Winch Load Cap.

(lbs.)Gear Ratio

Free Wheel Ratchet Position

Hand Break

Handle Length

(in.)

Ship Weight

(lbs.)Net

PriceDistr. Price

181000 GPW-1000 1000 4.2:1 off No 8 6 $21.00 $17.00 181200 GPW-1200 1200 4.2:1 Center No 8 6 $22.00 $18.00 181400 GPW-1400 1400 4.2:1 Center No 8 7 $25.00 $20.00 182000 GPW-2000 2000 4:6/11.1 Center No 11 15 $45.00 $36.00 182500 GPW-2500 2500 5.1:1/12.1:1 Center Yes 11 16 $46.00 $37.00

• Rugged zinc plated steel construction for corrosion resistance

• 1000 pounds to 2500 pounds capacities• Great for use on boat trailers and more• Reinforced frame for extra strength• Lifetime lubricated drum bushing and

gear shaft bearings


Screw Jack Turning Bars

SJ Series Screw Jacks

Stock Number Model

Capacity (ton)

Screw Size

(ODxL)

Bar Hole Size (in.)

Head Dia. (in.)

Base Size (in.)

Height Closed

(in.)

Net Weight

(lbs.)Net

PriceDistr. Price

441305 Sj-5 5 1 x 6 9/16 2-3/8 4-1/2 9 7 $24.00 $18.00

441310 Sj-10 10 1-1/2 x 8-3/8 11/16 3-1/16 5-1/4 11 19 $50.00 $38.00

441315 Sj-15 15 1-5/8 x 10-1/2 13/16 3-1/2 6 13-3/4 28 $59.00 $44.00

441320 Sj-20 20 2 x 12 13/16 4-1/8 6-7/8 16 36 $71.00 $53.00

441325 Sj-25 25 2-1/2 x 12 13/16 4-3/8 8 16-1/2 44 $94.00 $71.00

• Contractor quality mechanical jack for all-purpose lifts and supports

• Holds heavy loads indefinitely - will not creep• Heavy-duty bell shaped cast base• Less effort required to lift capacity load with

new design• Corrugated steel swivel head turns easily

under load• Easy to carry and position with built-in

handle

Stock No. 441305

$18 00

Stock No. 440301

$3 00

Stock Nunber Model Size (in.) Fits Jack Net Wt. (lbs)

Net Price

Distr. Price

440301 SjtB-1/2 1/2 x 18 Sj-5 3 $4.00 $3.00 440302 SjtB-5/8 5/8 x 24 Sj-10 4 $6.00 $4.00 440303 SjtB-3/4 3/4 x 36 Sj-15-25 5 $8.00 $5.00 440304 SjtB-1 3/4 x 42 Sj-15-25 8 $18.00 $13.00

Stock No. 456612

$82 00

AHJ Series Air/Hydraulic Bottle Jacks

• For lifting, pushing ,spreading, bending, pressing or straightening requirements

• Not affected by temperature extremes

• all models work in upright, angle, or horizontal position

• Shipped in heavy-duty blow molded plastic case

Stock Number Model

Rated Capacity

(ton)

Minimum Height

(in.)

Maximum Height

(in.)Base Size (LxW/in.)

Shipping weight (lbs.)

NetPrice

Distr. Price

456612 aHj-12 12 9-11/16 18-11/16 8.27x6.30 33 $102.00 $82.00 456620 aHj-20 20 9-11/16 18-11/16 8.66x6.89 40 $115.00 $92.00


Stock No. 453301

$20 00

JHJ Series Air/Hydraulic Bottle Jacks

• For lifting, pushing, spreading, bending, pressing or straightening requirements

• Not affected by temperature extremes• Low profile truck models or

standard models

Stock Number Model

Rated Capacity

(ton)

Minimum Height

(in.)

Piston Height

(in.)

Maximum Height

(in.)Base Size (LxW/in.)

NetPrice

Distr. Price

453301 jHj-2 2 7-1/8 4-1/2 13-5/8 4-1/2 x 2-1/2 $26.00 $20.00

453303 jHj-3 3 7-1/2 4-1/2 14-3/8 4-9/16 x 2-13/16 $31.00 $23.00

453305 jHj-5 5 7-7/8 4-5/8 15-1/2 5-5/8 x 3-1/4 $41.00 $31.00 453308 jHj-8 8 7-7/8 4-5/8 15-1/2 6 x 3-1/2 $49.00 $37.00 453312 jHj-12 1/2 12-1/2 9-1/2 5-7/8 18-1/2 6-1/2 x 4-1/8 $57.00 $43.00 453313K jHj-12 1/2L 12-1/2 6-3/4 3-3/4 13-3/8 6-1/2 x 4-1/8 $5700 $43.00 453317 jHj-17 1/2 17-1/2 10-3/8 6-1/2 20 7-1/8 x 4-5/8 $84.00 $63.00 453318K jHj-17 1/2L 17-1/2 6-3/4 3-1/2 13 7-1/8 x 4-5/8 $84.00 $63.00 453322 jHj-22 1/2 22-1/2 10-5/8 6-1/4 16-7/8 7-1/8 x 5-1/2 $90.00 $68.00

453323K jHj-22 1/2L 22-1/2 7-1/8 3-3/8 12 7-1/4 x 5-1/16 $90.00 $68.00

453335K jHj-35 35 11 6-1/4 17-1/4 8-3/8 x 5-1/2 $189.00 $142.00 453360K jHj-60 60 12 6-3/4 8-5/8 9-1/4 x 7-3/8 $44800 $336.00

453399K jHj-100 100 12 5-2 17-11/16 14-31/32 x 10-7/16 $1,783.00 $1,337.00




JTJ Series Industrial-Duty Toe Jacks

Stock Number

Model Number

Rated Cap’y Toe

(ton)

Toe Ht Min (in)

Toe Ht Max (in.)

Head Ht Min

(in.)Head Ht Max (in)

Net Price

Distr. Price

454502 jtj-2St 2 5/8 5-1/16 9-3/8 13-3/4 $119.00 $89.00 454505 jtj-5St 5 7/8 5-9/16 11-3/4 16-1/8 $205.00 $154.00 454510 jtj-10St 10 1-1/8 6-13/16 13-1/8 18-1/2 $279.00 $209.00

• Heavy-duty, industrial quality, dual purpose jack

• designed for lifting loads with very low minimum clearances (toe) or high clearances (head)

• Ideal for house moving, machinery installation and application at shipyard, bridge building or plant construtction sites

Stock No. 454502

$89 00

MATERIAL HANDLING - Accessories / Jacks Jacks - MATERIAL HANDLING


MATERIAL HANDLING - Accessories / Jacks Jacks - MATERIAL HANDLING

• designed for the removal and installation of auto and light truck transmissions or transfer cases

• Heavy-duty steel ball bearing swivel casters

• Fully adjustable saddle, corner brackets and safety chains

• “Quick” lift hydraulic pump for rapid lifting to contact point without load, except ttj-1000S

• Safety overload and top-of-stroke bypass system provides maximum pump protection

JSJ Series Short Chassis Service Jacks Transmission Jacks

JASJ Series Air/Hydraulic Service Jack

JSJ Series Long Chassis Service Jacks

JASJ Series Long Chassis Air/Hydraulic Service Jacks

Stock Number Model

Cap’y (ton)

Min. Height

(in.)

Max. Height

(in.)Saddle (dia./in.)

Overall Length

(in.)

Overall Width

(in.)

Handle Length

(in.)

Ship Weight

(lbs.)Net

PriceDistr. Price

454227 jSj-2-1/4X 2-1/4 4-1/2 19-1/4 4-3/4 26-1/2 13-7/8 39-7/8 (2pc.) 84 $77.00 $62.00

454223 jSj-3X 3 4-1/2 21 5-1/8 26 13 37-3/4 (2pc.) 90 $93.00 $74.00

• Features automatic safety overload bypass system

• Full swivel, ball bearing rear casters are positioned for best load distribution and optimal maneuvering

• “Quick Lift” pump feature with no load• Complies with aNSI/aSME PaLd-10

standards

Stock No. 454227

$62 00

Stock No. 454430

$240 00

Stock No. 454550

$392 00

Stock No. 450055

$194 00

Stock No. 454200C

$268 00




Stock Number Model Capacity

(ton)Minimum Height (in)

Maximum Height (in)

Saddle (dia/in.)

Ship Weight

(lbs.)Net

PriceDistr. Price

454430 jSj-3t 3 5-1/8 23-5/8 4-7/8 165 $369.00 $240.00 454450 jSj-5t 5 5-7/8 22 5-1/8 242 $509.00 $311.00 454410 jSj-10t 10 6-1/3 22 6 364 $821.00 $534.00

• For heavy-duty automotive and truck repair and maintenance shops

• Extra wide swivel saddle for added stability

• Complies with aNSI/aSME PaLd-10 standards


Ship Weight (lbs.)

Net Price

Distr. Price

454550 jaSj-5L 5t Lng Cha air/Hyd Serv jack 242 $560.00 $392.00 454110 jaSj-10L 10t Lng Cha air/Hyd Sev jack 364 $903.00 $632.00

Stock Number Model

Cap’Y (lbs.)

Min. Height

(in.)

Max. Height

(in.)

Sideways Adj.

Left/Right (deg.)

Back/Forw.(deg.)

Overall Dim.

(WxL/in.)

Ship Wt.

(lbs.)Net

PriceDistr. Price

450055 tj-1000 1000 8-1/4 30-1/2 30 60 / 17 19 x 34-3/4 137 $242.00 $194.00

450077 tj-2000X 2000 8 31 30 17 / 60 19 x 36 188 $315.00 $252.00

• Equipped with a labor-saving air pump and a high-speed cylinder piston that increases lifting speeds and efficiency

• 3-1/8" extension screw height• Lifting time:

120 seconds with rated load, 35 seconds with no load

• 90 to 150PSI, 3HP compressor required

Stock Number Model

Cap’y (ton)

Min. Height

(in.)

Max. Height

(in.)Saddle

(dia./in.)

Overall Length

(in.)Ship Weight

(lbs.)Net

PriceDistr. Price

454200C jaSj-22C 22 8-1/4 20-5/8 2-5/8 41-3/8 110 $298.00 $268.00


• Convenient foot operated pump and release valve allow use of both hands to position and stabilize vehicle

• all steel construction with rust resistant powder coat finish

• Steel swivel casters with foot brake to prevent movement

JMJ Series Motorcycle/ATV Jack

Stock No. 454355

$67 00


Stock Numer. Model

Cap’y (lbs.)

Min. Height

(in.)

Max. Height

(in.)

Saddle Dimensions

(LxW/in.)

Safety Arm Pos.

Overall Size

(LxWxH/in.)

Ship Weight

(lbs.)Net

PriceDistr. Price

454355 jMj-1500 1500 5-1/2 17-3/4 12 x 2-1/2 (2) 6 36 x 16 x 14 82 $84.00 $67.00

• For heavy-duty automotive and truck repair and maintenance shops

• Extra wide swivel saddle for added stability

• all models feature a locking t-bar handle and foot pump


JES Series Engine Stands• Engine can be rotated a full 360º

with turning bar• Positive-action lock secures engine

in any position• Engine-mounting plate included

with four adjustable support arms

Stock Number Model

Capacity (lbs.)

Base (LxW/in.)

Height (in.)

Ship Weight

Each (lbs.)Net

PriceDistr. Price

442077 jES-2000C 2,000 40 x 30 36 75 $104.00 $83.00


Stock No. 442077

$83 00

Hydraulic Shop Cranes

Stock No. 106200

$207 00

Stock Number Model

Boom Position Cap’y (lbs.)

Ship Weight (lbs.)

Net Price

Distr. Price

106200 jHC-200X 1 1100 295 $296.00 $207.00 2 20003 33004 4400

106203K jFHC-200X 1 1100 229 $301.00 $211.00 2 20003 33004 4400

• Heavy-duty steel frame construction

• Quick-lift hydraulic ram features two pump pistons - lifts with both up and down stroke

• Chrome plated plunger and ram pistons provide superior rust resistance

• top-of-stroke and safety overload bypass system protects hydraulic ram assembly

• oversized hitch pin for quick and easy boom adjustment

• Steering handles enable improved maneuverability

• Rugged steel fixed and swivel casters• jFHC-200X model features folding legs with

safety pins for compact storage• Complies with aNSI/aSME PaLd-12

standards


JSS Series Heavy-Duty Jacks Stands

Stock No. 441003

$15 00

• Heavy-duty, welded steel construction• the weight of the load prevents the ratchet pawl from disengaging while

under load• Reinforced legs for use on asphalt

Stock Number Model

Min. Height

(in.)

Max. Height

(in.)Base Size

(in.)

Ship Weight

(lbs.)Net

PriceDistr. Price

441003 jSS-3 11-3/4 17-1/4 7-5/8 x 8-5/8 19 $21.00 $15.00 441006 jSS-6 15 24-1/4 10 x 11-1/4 34 $32.00 $22.00 441012 jSS-12 19 30-3/8 12-3/8 x 14-1/4 78 $93.00 $65.00


Farm Jacks

Stock No. 440435

$34 00

Stock Number Model

Lifting Cap’y at 1'

(lbs.)

Winching/Pulling

Cap’Y (lbs.)

Clamping Cap’y (lbs.)

Min. Height

(in.)

Max. Height

(in.)

Ship Weight

(lbs.)Net

PriceDistr. Price

440435 Fj-3-1/2 7000 5000 750 4-1/2 43-3/8 35 $42.00 $34.00

• Multi-purpose jack to lift, push, pull, or clamp• Rugged steel construction throughout• automatic step-by-step operation for raising and

lowering load• Large cast iron base for stability• adjustable cast steel top clamp clevis for clamping

operations• Safety shear pin protects lifting saddle and dropping

of load if jack is overloaded• Cast steel large and small runners• Reversible upright steel bar for long life• Bar holes will accommodate chains, cables, etc.• Quick disengage with no load


MATERIAL HANDLING - Jacks / Stands Miscellaneous - MATERIAL HANDLING


Portable Utility Mixer

Stock No. 229235

$316 00

• Motor mount slotted for 2HP gasoline engine

• Large 3.5 cubic foot capacity drum with replaceable tines

• Handles two 90 lb. Bags of dry cement or mortar with ease

• Sealed ball bearings support drum rotation which insures low maintenance and long life

• Spring-loaded handle and slotted locking plate secure tip angle of the drum

• drum tips 360

Stock Number Modelv RPM Voltage AMP Horsepower

Ship Weight

(lbs.)Net

PriceDistr. Price

229235 PuM-35 1,725 115/230v, Prewired 115v 15 1/2 125 $395.00 $316.00

BRK Series Hydraulic Body Repair Kits

Stock No. 680004

$81 00

Stock Number Model

No. of Pieces

Ship Weight

(lbs.)Net

PriceDistr. Price

680004 BRK-4a 18 44 $115.00 $81.00 680010 BRK-10a 17 85 $192.00 $134.00

• Let hydraulic power make light work of body or collision repairs• Straighten, bend, press or spread steel with 4-ton or

10-ton capacity models• automatic safety overload system protects equipment• Proof tested and certified to meet aNSI/aSME B30.1 standards• two-stage piston for quick-action pump with BRK10a


MATERIAL HANDLING - Jacks / Stands Miscellaneous - MATERIAL HANDLING

2008 ARA Promotion Rules

1. Free give-a-ways valid for orders placed only during the dates of the show, Feb 12-14 2008.

2. A total of one premium give-a-way per company during the dates of the show.

3. Orders may not be combined to increase total value of order.

4. Other non-promo items may be added to the order; they will not receive pricing but will receive the terms and will count toward the total order value.

5. Freight paid at $1,500.00 within the continental US. For customers outside of the continental US, freight will be paid to the US border. Beyond that is the responsibility of the customer. Customers in Alaska, Puerto Rico and Hawaii, freight will be paid to your location with a $5,000 dollar order.

Order Value Terms Give Away

$1500-$49991% 15 days or Net 30 Freight Paid

140093 PT-2748J

$5000-$9999 Net 2% 15 or 30, 60, 90

140501 JWS-770 Winch stacker with free platform, 140503

$10K+ Net 2% 15 or 30, 60, 90

140780 Jumbo Scissor Lift Table

Order Value Terms Give Away

$1500-$4999 Standard Terms Freight Paid 140093 PT-2748J Series

$5000-$9999Net 2% 15 or 30, 60, 90 Freight Paid

140501 JWS-770 Winch stacker with free platform, 140503

$10K+Net 2% 15 or 30, 60, 90 Freight Paid

140780 Jumbo Scissor Lift Table

MATERIAL HANDLING AND AIR TOOLSd29c95q8mcesvj.cloudfront.net/wysiwyg/pdf/b396003f62a666987ed… ·...

Documents

Transcript of MATERIAL HANDLING AND AIR TOOLSd29c95q8mcesvj.cloudfront.net/wysiwyg/pdf/b396003f62a666987ed… ·...