MANUFACTURED IN THE USA
Transcript of MANUFACTURED IN THE USA
MANUFACTURED
IN THE USABringing Manufacturing Jobs to America
USAGloves.com 281.301.5277 [email protected]
Company OverviewUSA Gloves will provide made in the US Nitrile Gloves. The first manufacturing facility will be located in Stafford, TX where we plan on opening July 1st, 2021 and we will slowly scale into 12 produc-tion lines. At full scale, we expect our monthly output to be at 125 million gloves daily.
July 1st, 2021The first production facility
operations will begin.
300 Total Jobs Created This production facility will
create manufacturing jobs in the USA.
125 Million Gloves Produced Per Month
The gloves will be 4.3 mil thick-ness, examination grade, and will
be FDA approved gloves.
USAGloves.com 281.301.5277 [email protected]
Best In Class Manufacturing FacilityUSA Gloves manufacturing facility will utilize state of the
art hybrid automation with single formers.
225,000 SqftProduction Building Size
12Production Lines
500 ft LongEach Production Line
$18 MillionCapital Invested for Phase 1
USAGloves.com 281.301.5277 [email protected]
Product Description
1. Textured finish at the fingertips to enhance grip2. More chemical resistant and puncture resistant than vinyl or latex3. Have a high level of touch sensitivity
5. Powder Free Exam Grade quality4. Higher chemical & liquid protection
Each BoxPackage
Size S, M, L, XL
Color: Blue, Purple, Green
Quantity in each Box:100 Gloves/Box
Each Case
Gross WeightApprox. 12 Lbs.
Quantity in each Case:1000 Gloves/Case
Disposable Exam Grade, Powder Free Nitrile Gloves
USAGloves.com 281.301.5277 [email protected]
Facility Layout
Production Line No. 4
Production Line No. 3
Production Line No. 2
Production Line No. 1
500 ft
Production Line No. 8
Production Line No. 7
Production Line No. 6
Production Line No. 5
Functional Service Area
Functional Service Area
Storage
Clean room area
Loading outLoading out
Raw material
Office entrance
Docks Docks
PRODUCTION LINE10 ft
8 ft
8 ft
10 ft 10 ft
Production Line UsageThe production line basic specification ( 1 line )
Water Consumption 12.5 ton per hour
Natural Gas Consumption
250m³ per hour
Electric Consumption 250kw per hour
Line Dimensions500 ft (length), 8 ft (width), 25 ft (height)
Chain Length 3000 ft
Line Speed40 ft per min.
Glove Molds9,000 pcs. per line
Mold Type Porcelain, Textured Fingers
Output Capacity 15,000 gloves per hour
Nitrile Consumption 145.8kg per hour
USAGloves.com 281.301.5277 [email protected]
1
No.
Nitrile Gloves
Product
1 Billion
Yearly Capacity
S, M, L, XL
Size
Type Single use disposable protective glove, non sterile
Shape Ambidextrous - Straight fingers
Material Nitrile Butadiene Rubber (NBR) (not made with natural rubber latex)
Color Blue, Purple, Green
Inner Online chlorinated / Powder free
Outer No treatment
Cuff Surface Rolled cuff / Textured
Storage life 3 years
Standars, guidelines & quality certificates
Quality Certification ISO 9001 ISO 14001 OSHAS 18001
Comformity to directives Personal Protective Equipment 89 / 686 / EEC: Cat III for complex risks
Comformity to standars EN 420 EN 455 1-3 EN 374-1-3 ASTM D6319
Comformity to food regulation 1935 / 2004 (EC)
Labelling according to EN 420 EN 374
Min. Thickness (in mm) Finger Palm Cuff
Single measured 0.150 0.110 0.100
Double measured 0.30 0.22 0.20
Beore aging After aging Testing method
Elongation min. 500% min. 400% ASTM D6319
Tensile strenght min. 14 MPa min. 14 MPa ASTM D6319
AQL (for pinholes) < 1.5 EN 374-2EN 455-1
Residual powder / Powder content 2 mg / glove EN 455-3
Force at break median > 6.0 N EN 455-2
Length median 240 mm EN 455-2
Spec Sheet
USAGloves.com 281.301.5277 [email protected]
Liquid Protection
High Level
Chemical Resistant
Exam Grade
Touch Sensitivity
USAGloves.com 281.301.5277 [email protected]