Manual PixelView v1.5

PixelView Software User Manual

Unique: (1) Friendly Scan function

PixelView Software could be easily defined as a TV

player, no matter digital TV signal or analog TV signal.

Avoid unfriendly setting, just plug in cable and scan,

you get everything on cable!

(2) Powerful channel manager - Individual channel setting(Video/Audio format)

- Channel rename/resorting

- Favorite channel setting

PixelView Software allows you manage what you get

from TV cable. For example, you can put PAL TV in

List 1~20, SECAM TV in List 21~25, DVB-t TV in List

26~40 or what else you wish.

(3) User self-define volume of different sources. This function prevents the suddenly high-volume

voice while switching different sources. Protect your

ear and Speaker.

(4) Flexible Remote controller setting PixelView Software supports 3 sets Remote controller.

Each remote controller can redefine every button.

System Requirement (1) Pentium 4 2.4 GHz / Centrino 1.6 GHz or faster

(2) 512 MB or more system memory

(3) 20 MB disk space for installation

(4) DirectX 9.0 compatible video card

(5) Windows XP with SP2 / Windows Vista

Operate PixelView Software 1 Start PixelView Software 2 An User interface will show up

Click icon on computer desktop

Select language

Select Source

Click to start

Click to set language

3 First Start – Check device Press Ok for next step. PixelView Software support List

Digital Capture Device Analog Capture Device

SAA7135 Digital TV Card SAA7135 Analog TV card




TM6000 Digital TV TM6000 Analog TV

DiB7700 Digital TV DiB7700 Analog TV

CX23885 Digital TV CX23885 Analog TV

SAA7130 Analog TV card

Bt878 TV Card

TM5600 Analog TV

Remark: TV Expert does not support 2 TV Cards in the same time. So that please do not set such as SAA7135 Digital TV Card with TM5600 Analog TV together.

Check Digital TV Device here

Check Analog TV Device here

!!!

Please see the Page 16

3.1 Scan Channel

Press Ok for after scan finish and watching TV Program.

Select country here

Select signal source

Activate Frequency scan

Press to scan programs

After Scan TV Channel, if you find TV Sound is not right, please check here, and switch different playback option!

!

4 Function User Interface (TV)

Back to Home

Activate Favorite Channel List

Select Channel

Select Volume Volume

Mute

4.1 TV Control on the User Interface Function Menu

Click Mouse right button for Function Menu

4.2 Schedule Recording PS : MPEG4 Codec available from www.divx.com

Select Record Format Basic Format is MPEG2

** More formats depend on the Codec in your PC. EX: MPEG1/2/4

Select Source

Select Channel

“One Time only” “Daily” ,“Weekly”

Choose signal source from here- TV - Video - S Video - FM Radio

Please Keep PC Power on or Sleep Mode while Schedule Recording.

Set Date

Set Time

Set Date

Set Date

Determine your PC Status after schedule record.

After Setup Click here “Add to List” to add schedule.

Press “OK” and leave,TV Expert will wake up and record what you need!

Notice : Before you used the Schedule record on Windows Vista

system, please change your power option setting.

Click here to change

Click here to choose

“Don’t require password”

4.3 Settings TV Channel

Select a channel

TV Volume Setting: By this setting, you can balance the default volume with other signal source: Video / S-Video/ FM Radio

Rename channel

Set TV system

Set sound standard

4.4 Set Picture quality: By this video mixer, you can fine tune TV picture quality.

Press “Default” to recover factory setting

Here you can fine tine your Video.

Select a channel

4.5 Set active/disable and favorite channel

!! Disabled Channel could not be selected by button CH +/- and

remote controller

Click here to activate Favorite List. The button CH +/- and Remote Controller can only switch between favorite channels.

CH Status: Active

CH Status: Disable

Press to active program

Press to disable program

CH Status: Favorite Channel Active

CH Status: Favorite Channel Disable

Use Mouse to add to favorite list

Activate Favorite List-

4.6 Channel manager

Select and Edit a channel

Use Move to resort channel list

You can manage your Channel List. !! For example, put France TV and German TV in a same channel List.

Rename channel

Set TV system

Set sound standard

4.7 Settings Scan

4.8 Settings Record

Set Video Record file format MPEG 1 / MPEG 2 / WMV / DivX

Set image capture file format BMP / JPG

Set radio record file format WMA / WAV

Click to change saving path Click for

“Always Time Shifting”

Select Country & TV system

Select signal source

Select this to activate Frequency scan

4.9 Settings Device

In Option: SAA7130 Analog TV Card and Bt878 TV Card

Choose “Line in”EX : 1. ADI audio chip : Choose “Line In”

2. Realtek audio chip : Choose “Realtek HD Audio Input”

Choose “Speakers”

In Option: SAA7135 Analog TV Card and others.

In Option: SAA7135 Analog TV Card.Audio Mixer Device does not need to make setting

XP : Choose “Wave” Vista : Choose “Master Volume”

Different Audio Chip might have different default setting. You may adjust proper volume here while recording or Timeshifting.

Different Audio Chip might have different default setting. You may adjust proper volume here for live TV.

4.10 Settings Remote Controller

Select

Change Key define

4.11 Settings Misc

Allow more then 1 image per snapshot

More personalize setting…

Manual PixelView v1.5

Documents

Transcript of Manual PixelView v1.5