MANUAL DE DETECTOR FETAL

7/25/2019 MANUAL DE DETECTOR FETAL

1/12

JPD-100APD 100A

Fetal doppler

OPERATE MANUAL

Jumper Medical Co., Ltd


2/12

2005

Copyright belongs to Jumper Medical Co.,Ltd,

our company can reserve all the copyright of expert puissance according to

the legality.With out the company script permission,no one is allowed to increase

and decrease,brief,pirate,modifyorcopy.

Copyright


3/12

Open and check............................................. ........1

After sales service company...................... ............1

Notice,caution and suggestive instruction.............. .......2

Specification...........................................................2

Main configuration..................................................3

Function keys introduction......................................4

Operate manual......................................................5

Stock and transport................................................6

Cleaning.................................................................6

Safety sort..............................................................6

Apply range............................................................6

In case of difficulty..................................................7

Circuitry principium................................................8

Table fo content


4/12

1

Unpacking

Unpacking the unit carefully and make sure that all accessories are

put aside so they will not be lost.Examine the unit for any possibility

of shipping damage.If your unit is damage or fails to operate,notify

our dealer or our company immediately.Please offer the model number,

S/N,date of buying and contact information when you contact us.

Standard packing list1.mainframe(including Probe)...................1 set

2.adapter ...................................................1 pc3. Specification.............................................1 pc4. Warranty card..........................................1 pc

5. Qualify card..............................................1 pc

If you have speical request,please see the contract.

After service company

After service company:Jumper Medical Co., Ltd

Add: 2nd Floor, No. 5 Bldg., Nanshui Industry Village,

5th Industry Rd., Shenzhen 518067 P.R. China

Tel:86-755-83547883 Zip:518067


5/12

Ultrasound operating frequency 2.0MHz 3%

Integrative sensitivity 200mm far from the probe no less than 90db

2Space pink value press 17.38mW/cm

2Valid area of the ultrasound energy-transfer component 1cm

2Ultrasound output power 5mW/cm

50 210bpm

Power supply DC 7.2V

Gel request2

Density 1.0g/cm Speed 1.7m/s

5 2Impedance 1.7 10 g/cm.s Attenuation 0.02db/mm

Dimensions 240 160 115mm

Mainframe N.W. 0.25Kg

2

Notice,caution and suggestive instruction

1.There is criticallycircuitry inside ,do not open it by yourself.

2.You can use the litmusless cleanser to clean the surface,do not put it in high

temperature or use corrosive cleanser ,you can use a few of alcohol to clean the

probe

3.When you finish using it,use the cloth to wipe it.

4.We suggest using the high-powered alkalescent battery,the tinpot battery may

creepage and damage the equipment .

5.If you will not use it for a long time,take off the battery ,please dispose the used

battery according to the local governments request.6.Do notcollided the equipment lest damage it.

7.Please keep the equipment waterproof and dampproof.

Specification

FHR range:

Note:Jumper follows a policy of continuous advancements in development.

For this reason specification may be changed without notice.


6/12

9

Probe

LCD display

Switch

Turn down button

Turn up button

Manual calculation start and stop button

Monitor mode switch button

Loudhailer hole

3

Charge junction

100

111

122

111

122

Battery storehouse

Label

Back of the mainframe

Head-on of the mainframe

100

Insertfrom this

position

Main structure

Adapter

Manual calculation start and stop button


7/12

4

133

144

133

144

MODELODEL

Function introduce

Symbol of monitor model

FHR display area

Monitor mode switch button,it has 3 models and sign by1,2,3

Model 1:instantaneous auto calculate FHR

Model 2:calculate average FHR per 10 seconds(easy to check the

baseling of FHR)

Model 3:Manual calculate FHR

Press the button can switch the monitor model,when you turn

on the equipment,acquiescence model 1.

Turn down button,press it,the volume reduced until no voice,

when the volume is minimum,press it will without voice.

Turn up button,press it ,the volume increased,when the volume

is maximun,press it will without voice.

Manual calculation start and stop button,the two buttons with

the same function and only valid in model 3.when it is in model

3,press the button and wait until 10 times fetal heart beat,then

press it again,FHR display area will display the manual calculateresult.


8/12

5

Operate manual

Auto measure the HR

1.Turn on

Press For 2 seconds ,the equipment will turn on and self-check,when the

HR appear ---,,the self-check is finish and get into use,model 1 is default.

2.Detect the FHR

Put the Gel on the detect position of the pregnant womansabdomen ,then

press the probe ensure it is good connected ,when the probe is on the right

position,you can hear the fetal heart beat,wait until the voice is clearly,the LCD

will show the right FHR.

3.Adjust the volume

The volume will increase,reduce when you press the

During the FHR is showed,if the volume is in maximum or minimum,continue to

press it will useless ,and without voice.

4.Turn off

When you do not use it, press for 2 seconds to turn off it. The equipment will auto

turn off if it is no signal,press to restart it.

Handmade measure HR

1.Turn on the equipment and press ,choose the model 3--handmade

measure HR

2.Detect the FHR

Put the Gel on the detect position of the pregnant womansabdomen ,then

press the probe ensure it is good connected ,when the probe is on the right

position,you can hear the fetal heart beat,press or According to the voice

from the Loudspeaker 10 times later,press or again,the LCD will show the

average FHR,repeatit if you want to continue it

,

.

3.Change to auto measure.

Press can change to auto measure model.

4.Turn off

When you do not use it, press for 2 seconds to turn off it. The equipment

will autoturn off if it is no signal,press to restart it.


9/12

6

Stock and transport

Stock environment:temperature 5 --45

Humidity 9%--45%

The product can be sent by air ,sea and land-carriage,but cant place itin the open air.

Cleaning

Mainframe:use the litmusless cleanser or alcohol to clean the surface,dont

let the liquid get into the inside of the device,especially the LCD display

windows.

Probe:use the litmusless cleanser or alcohol to clean the surface,the line and

sheath can use the litmusless cleaser to clean it.

Safety sort

The safety sort of the product is :II Before

Apply range

Suit for fetus more than 16 weeks old


10/127

In case of difficulty

What apprance to be a malfunction may not always serious,if your unit

should not perform as expected,consult the table below to see if the

problems can be corrected before seeking help from your dealer or service

representative.

Symptom Cause Remedy

Audio scream

Weak sound output

Low sensitivity

Change the battery

Turn down the volume

Use less Gel

Turn up the volume

Add Gel

Change the battery

Locate the correct position

Add Gel

Battery is exhausted

Audio volume too high

Too much Gel on theprobe surface

Audio volume too low

Insufficient GelBattery is exhausted

Incorrect probe position

Insufficient Gel


11/12

circuit diagramircuit diagram

8


12/12

Manufacturer: Jumper Medical Co., Limited

Address: 2nd floor ,Number 5 Building, Number 5

Industry Village, Number 5 Industry Road, , Shenzhen

Tel: 86-755-83547883 Zip Code: 518067

Website : www.jumper-med.com

MANUAL DE DETECTOR FETAL

Documents

Transcript of MANUAL DE DETECTOR FETAL