MAD MTW Planar Speaker - getmad.com€¦ · The MAD-1 driver is coupled to a wave guide that...
Transcript of MAD MTW Planar Speaker - getmad.com€¦ · The MAD-1 driver is coupled to a wave guide that...
HPV TECHNOLOGIES, Inc. 17752 Fitch Irvine, California 92614
Phone: 949-476-7000 Fax: 949-476-7010 www.getmad.com
MAD MTW Planar Speaker
The MAD MTW three-way planar magnetic speaker represents a technological
breakthrough that delivers the stellar sonic qualities of planar technology in an
compact form. While the box is small...the sound is not! The three planar trans-
ducers and two 12” long excursion, side firing bass driver generate a huge sound
delivered with expressive details and powerful clarity. This combination of com-
pact size and exceptional musical fidelity makes the MTW an excellent choice for
a wide range of installed or portable applications.
The MTW performance is expanded when matched with the companion VLF or VFL-jr. subwoof loud-
speakers. Combining the MTW and VFL subs together creates a performance package suitable for a wide
range of musical styles and genre by creating an equalized frequency response from 35 Hz to 19 KHz.
What makes the MTW so exceptional? The answer resides in the two different planar magnetic transduc-
ers, the MAD-1 and the PT-3, and the wave guide enclosure. Both transducers are true push-pull planar
drivers that have been positioned so that their acoustical energy sums together perfectly without any comb
filtering, resulting in a very smooth and uniform 70° horizontal x 20° vertical dispersion. In addition, these
drivers have very low mass which makes their transient response incredible fast and distortion virtually unde-
tectable. The MAD-1 driver is coupled to a wave guide that maintains pattern control down to 300 Hz.
MTW can be combined with VFL subwoofs in a variety of combinations in both ground supported or flown
arrays. For more information regarding specific applications or pricing, email [email protected] or call our
HPV Applications Group at 949-476-7000.
MTW w/o Grill
MTW Arrays
MTW Arrays w/Fly Bars
Phone: 949-476-7000 Fax: 949-476-7010 www.getmad.com
The MTW is a unpowered, tri-amped speaker that combines one MAD-1 planar mid-range, two PT-3 planar
high frequency drivers, and two 12” long excursion bass drivers into an compact, high performance enclosure,
measuring less than 30" wide x 17" high x 21" deep. With a 70° horizontal x 20° vertical dispersion pattern, the
MTW is optimized for full-range use with a system response from 55 Hz to 19 Khz. The MTW produces excep-
tional sonic detail and imaging in a stereo or surround sound applications or when used as near field monitors, fill
speakers, or as flown or ground stacked line arrays. .
The rigging system integrated into each cabinet includes all rigging points and adjustment cams allowing each
enclosure to be vertically splayed from 0° to 15°. The array’s SPL output and coverage patterns are determined
by the number of cabinets in the array. Refer to the following chart for performance specifications. Actual output
is subject to environmental and atmospheric conditions and may vary from the published specifications.
MTW Specifications
Speaker MTW
Number of Transducers Low = Dual 12” long excursion bass drivers
Mid = One MAD-1 Planar Magnetic Transducer High = Two PT-3 Planar Magnetic High Frequency Transducers
Horizontal Dispersion 70° at 500 Hz. — 90° at 10 KHz
Vertical Dispersion 20° total; ± 10 °
Power Handling Capacity per Speaker
Low = 500 watts RMS; Mid = 110 watts RMS; High = 100 watts RMS
Speaker Sensitivity Low = 96 dB 1w/1m; Mid = 103 dB 1w/1m; High = 106 dB 1w/1m
Nominal Impedance Low = 6 Ohms; Mid = 4 Ohms; High = 8 Ohms
Cam Intervals for Vertical Splay Adjustment
0°, 2.5°, 5°, 7.5°, 10°, 12.5°, 15°
High Pass Filter for MTW Array w/o VFL-Series Subs
Two boxes = High Pass at 60 Hz; 24 dB-LR slope, Four boxes = High Pass at 50 Hz; 24 dB-LR slope,
Recommended X’over when combined with VFL Subs
X’over between Subs & MTW Low = 80-100 Hz; 24 dB –LR slope X’over between MTW Low & MTW Mid = 210-250 Hz; 48 dB –LR slope;
X’over between MTW Mid & MTW High = 3 KHz; 48 dB –LR slope
Input Connections Low, Mid, & High via 3 Speakon NL4; 1+ & 2+ wired in parallel, 1- & 2- wired in parallel
Terminal Strips available as option for permanent installation
Parallel Connections Parallel NL4 connectors used for “loop thru”.
Screw terminal connection available for permanent installations.
Dimension per Speaker H x W x D in Inches
16.6 x 29.8 x 20.3
Weight per Speaker 110 Lbs.
Material & Color 13 ply Baltic Birch; Color = Black paint; Cabinets available with primer coat for custom painting by user. Custom colors available as option.
System Rigging All rigging is constructed certified to international rigging standards.
Supplied Accessories Rigging Pins and Splay Cams
Optional Accessories Upper Fly Grid, Lower Pullback Bar, Ground Stack Support Foot, System DSP (preloaded with processing parameters), Amplification, Speaker Cables
Phone: 949-476-7000 Fax: 949-476-7010 www.getmad.com
MTW Images
MTW Compact 3-way Speaker MTW 3-way Speaker with VFL-jr. 18” Subwoof