M2M CAPTURE SOFTWARE - Eddyfi...1. Download the « Capture_PC_3.x.exe » file and extract the...
Transcript of M2M CAPTURE SOFTWARE - Eddyfi...1. Download the « Capture_PC_3.x.exe » file and extract the...
M2M CAPTURE SOFTWARE
INSTALLATION GUIDE
March 2020| Ref : CAPTURE_INSTALLATION_GUIDE_how_to_install_CAPTURE_US-B
INSTALLATION OF…
SUMMARY
1. CAPTURE SOFTWARE ON THE DEVICE
2. CAPTURE ON THE PC
INSTALLATION PROCEDURE (1/6)
CAPTURE ON DEVICE
1. Download the « Capture_Update_3.X.cap » file on the
website.
2. Copy the « Capture_Update_3.X.cap » file on the root of
a USB disk.
3. On GEKKO or MANTIS, press to access to the
general settings.
Note: This process shall be done with the equipment
connected to the AC Power supply.
Current release
INSTALLATION PROCEDURE (2/6)
CAPTURE ON DEVICE
4. Press on “Upgrade”.
Current release
INSTALLATION PROCEDURE (3/6)
CAPTURE ON DEVICE
5. The name of the release 3.X. appears. Press on
“Upgrade”.
Current release
INSTALLATION PROCEDURE (4/6)
CAPTURE ON DEVICE
6. Repository update
If you press ”Yes”, you will update all the libraries (specimens,
probes, and scanner) and the applications. This procedure will
not erase the existing user files. Only the files installed within
our repository and with the same name will be replaced.
If you press “No” the libraries will not be updated.
If you need later to update the libraries, download
“Capture_Repository_Update_3.X.cap” and install them as
specified in INSTALLATION PROCEDURE 1/6
Note: If you want to remove some or all libraries, you can delete
all the folders and install the new repository.
Current release
INSTALLATION PROCEDURE (5/6)
CAPTURE ON DEVICE
7. Wait for the reboot of your device
Current release
INSTALLATION PROCEDURE (6/6)
CAPTURE ON DEVICE
8. The new release is now available
In case of problem, please contact the support team
Current new release
INSTALLATION PROCEDURE (1/2)
CAPTURE ON PC
PC CONFIGURATION NEEDS
- Operating system: Windows 7 /Windows 8/ Windows 10
- Archive management tool (7z, WinRAR, WinZip...)
1. Download the « Capture_PC_3.x.exe » file and extract the contents (folder location free).
Extracting operation generates the « Capture_PC_3.x » folder.
2. Windows UAC configuration
Better to have the Admin rights at any time to use the CAPTURE PC software.
For this reason, you need to configure the windows UAC at the minimum level (see next page)
INSTALLATION PROCEDURE (2/2)
CAPTURE ON PC
2. Windows UAC configuration
- Go to user account then Modify the user account parameters
in the Control panel
- Set the scale button to its minimum level as shown on
the right picture
Once all steps are done, restart your PC
LAUNCHING CAPTURE PC
CAPTURE ON PC
Execute the « Go_Capture.bat » file located in the « Capture_PC_3.x
» folder.
If your PC is Windows 8 operated, you need to « execute as Admin »
after right-click on the Go_Capture file.
- The CAPTURE Home page should appear as shown on
the right picture
• Depending of the version, hard key (dongle) or soft key is required
to unlock functionalities
• From Capture 3.1, 3 different PC versions can be used :
- Capture Viewer (no licence required)
- Capture Companion (standard licence required)
- Capture Pro (advanced analysis licence required)
• In case of problems, please contact [email protected]