M125 LED

Light Engine:

Output:

CCT:

Shielding:

Options:

Emergency

Options:

Mid-power LEDs; 90+ CRI

Up to 2,025lm/ft; up to 101lm/W

2700K, 3000K, 3500K, 4000K; 3-Step Binning

Tempered Clear Glass with LED Optimized Inlay or Microprismatic

Inlay; 4mm Satine or Clear Polycarbonate Prismatic Lenses (IK10),

Clear or Diffuse Lens with Symmetric, Asymmetric 20° Wall Washer,

Asymmetric 5° Wall Grazer, and Batwing

Media Trunking, Single Fusing, Tamper Resistant, Seperate Switching

(consult factory), Suitable for Natatorium Environment (consult

factory), End Feed Both Ends (for conduit daisy chain), End Feed

Left (for conduit), End Feed Right (for conduit)

Emergency Circuit Wiring, Remote Micro Inverter (consult factory),

Cold-Weather Integral EM Battery Pack

Product Specifications

Terminal 2, Heathrow Airport, UKPhoto courtesy of James Newton

IP65, IK10 Rated, and Cold-Weather EnvironmentsM125 LED is the perfect luminaire for rugged applications where IP65 and IK10 standards are required. It is suitable for extreme weather conditions, down to -40°C/-40°F, and with the option for a Cold-Weather Integral EM Battery Pack suitable for temperatures down to -20°C/-4°F.

Possible Applications Include:

• Terminal areas• Railway stations• Bus stops• Shelters• Parking garages• Public spaces• Underpasses• Bridges• Laboratories• Restrooms• Sport complexes• Correctional facilities (NYS certified for mental facilities)

Joe Murray Rivers, Jr. Intermodal Transit Center, Savannah, Georgia, USA

M125 LED is a linear luminaire with high impact and access protection to IP65 and IK10 standards.

In addition to being a rugged luminaire for both indoor and outdoor environments, M125 LED offers a wide range of LED optics and shielding options.

M125 LED Optics and Shielding

(LI) - Clear Glass with LED Optimized Inlay

(SD) - Satine Lens(IK10 Rated)

(MI) - Clear Lens with Microprismatic Inlay

(PC) - Prismatic Lens(IK10 Rated)

(CNB) - Clear Lens LMO Symmetric

(CBW) - Clear Lens LMO Batwing

(CA2) - Clear Lens LMO Asymmetric 20° Wall Washer

(CA5) - Clear Lens LMO Asymmetric 5° Wall Grazer

(DNB) - Diffuse Lens LMO Batwing

(IK10 Rated)

(DBW) - Diffuse Lens LMO Batwing

(IK10 Rated)

(DA2) - Diffuse Lens LMO Asymmetric 20° Wall Washer

(IK10 Rated)

(DA5) - Diffuse Lens LMO Asymmetric 5° Wall Grazer

(IK10 Rated)

Camera and Speaker IntegrationNeed to add additional security measures or audio function to create a memorable experience or provide informative voice commands? On a project-specific basis, Selux can integrate cameras, speakers, or other accessories (all by others) into the M125 LED. Consult the factory today for your project-specific needs.

High Color RenditionIn combination with a high CRI value, M125 LED offers a high fidelity index (Rf) and high gamut index (Rg). The CRI and TM-30 values for M125 LED at 3500K are shown below. When creating a lighting design, attention should be paid to the Color Vector Graphic. A perfectly overlapping Color Vector Graphic indicates a light that perfectly matches the reference light (the sun).

M125 LED

CCT: 3500K

CRI = 95

Rf = 91

Rg = 98

R9 = 55

Color Vector Graphic

Media Trunking SystemThe Media Trunking System provides a raceway for additional cables for power and communications purposes to the necessary main power supply. This allows the cables and ducts to be concealed for a visually clean aesthetic.

Water-Tight Connection for Run LengthsWater-tight Nipple Conectors are supplied for all run configurations for easy connection.

Square Hex Nuts at each end cap

Side View

Bottom ViewRubber Washers

Nipple Connectors

Water-tight Silicone Gasket

Water-tight connection between luminaires

1/16” (2mm)

Use the Media Trunking System as a raceway for additional cables for power and communciations pruposes

'A''A'

Porsche Centre, Oakville, Ontario, Canada

Mounting OptionsSelux offers a wide range of mounting options, providing solutions for most architectural applications - including Wall, Surface, Pendant (Rigid Stem), Recessed Flanged, Recessed Flangeless, and Recessed Concrete Pour. See below for which mountings are available with the Media Trunking option.

Joe Murray Rivers, Jr. Intermodal Transit Center, Savannah, Georgia, USA

Wall Mount(available with Media Trunking)

Surface Mount(consult factory for Media Trunking)

Pendant (Rigid Stem) Mount(available with Media Trunking)

Recessed Flanged(available with Media Trunking)

Recessed Flangeless(available with Media Trunking)

Recessed Concrete Pour(not available with Media Trunking)*shown in vertical position

PublisherSelux Corporation5 Lumen LaneHighland, NY 12528www.selux.us

Edited by (responsible)Selux Corporation

Concept and DesignSelux Corporationwww.selux.us

PrintSelux Corporation5 Lumen LaneHighland, NY 12528

Selux is a registered trademark of the Selux Corporation.Errors accepted and subject to change dueto technical modifications. For conditions of saleand delivery please refer to www.selux.us.

The use of the text and images, even in part, isin breach of copyright without the consent ofthe Selux Corporation and punishable. This also applies tocopies, translations, microfilming and processingwith electronic systems.

11/2020