Inula SteelCore Bollard [SCIBL} selux
Transcript of Inula SteelCore Bollard [SCIBL} selux
Page 1 of 6 (Rev. 12/2021) SCIBL_SS_v1.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
ApprovalsProduct Modifications Please list modification requirements for review by factory:
LED WARRANTY
5YEAR
Inula SteelCore Bollard
Project:
Type: Qty:
Date: Customer:
Date:
Light Engine 1Q7.6W/577lm
2Q9014.1W/1156lm
2Q18014.1W/1156lm
CCT 40 4000K
Height
Finish WH White
BK Black
BZ Bronze
SP Specify Premium Color
Voltage
Options
SV Silver
DM Dimming (0-10V)
3Q20.5W/1689lm
301 3000K
4 4.0‘
1 IDA Approved
* For other CCT please consult factory
4QD27.2W/2246lm
50 5000K
AM1 Amber
4QS27.2W/2246lm
BL Semi-Matte Black
BUY AMERICAN
2Q90MU14.1W/854lm(max uniformity)
XXUnlit
XX Unlit
4.5 4.5‘
271 2700K
5 5.0‘
XXX Unlit
UNV 120-277V
SCIBL Inula SteelCore Bollard
SCIBL
Bollard Order Code: - - -
Series Height Finish Options
- - -
Light Engine
CCT Voltage
Series
SCIBL
* Custom colors available. Please consult factory.
240 240V
208 208V
120 120V
277 277V
PC Photocell
LP2 Low Power Version Decreases light output by 60%
HP2 High Power Version Increases light output by 100%
2 For 1Q, 2QXX, and 3Q please consult factory.
* See page 3 for details
GALV Hot Dip Galvanized Finish (Structural SteelCore Only)
Page 2 of 6 (Rev. 12/2021) SCIBL_SS_v1.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
8” diameter bollard sleeve
SteelCore and footing details
(refer to page 4)
Conduit (by others):Maximum 2x 1” trade size
Masonry blocks(1.5” max. height)
Inula SteelCore Bollard
Fixture Housing - Die cast low-copper and low-iron aluminum fixture body provides corrosion resistance in marine environments.
Gasketing - Continuous gaskets provide weather-proofing, dust, and insect control between castings.
LED Light Engine - High efficiency LED light engine equipped with brand-name LEDs, available in 2700K, 3000K, 4000K, 5000K CCT tolerance within a 3-step MacAdams ellipse, and Amber CCT. Suitable for max ambient temperatures up to 45ºC.
Optics - Proprietary vandal and UV resistant acrylic optic provides optimal light blending between quadrants.
Surge Protector - Designed to protect luminaire from electrical surge (20kA).
Low Power Option - 60% decrease in lumen output in same physical package.
High Power Option - 100% increase in lumen output in same physical package.
Light Chamber - Castings around Light Engine are painted with special Matte Black light absorbing powder coat paint. Meets International Dark-Sky Association (IDA) requirements B0, U0, and G0 BUG ratings at 3000K CCT.
SteelCore - Ø6-5/8” (OD) structural steel tube filled with rebar and concrete. Certified to ASTM Standard F2656 (C40-P1) ≤3.3’ penetration for 2,430lb Small Passenger Car traveling at 40mph. Meets requirements for ASTM Standard F3016/F3016M (S30-P1) ≤1’ penetration for 5,000lb Vehicle traveling at 30mph. Optional hot dip galvanized finish available for additional corrosion protection in challenging environments.
Footing (by others) - 30” cubic footing constructed with minimum 4,000 PSI concrete. One or two rigid metal or PVC conduit up to 1” trade size for wiring. Consider local soil conditions and consult structural engineer to confirm foundation detail for construction on site.
Exterior Luminaire Finish - Selux utilizes a high quality Polyester Powder Coating. All Selux luminaires and poles are finished in our Tiger Drylac certified facility and undergo a five stage intensive pretreatment process where product is thoroughly cleaned, phosphated and sealed. Selux powder coated products provide excellent salt and humidity resistance as well as ultraviolet resistance for color retention. All products are tested in accordance with test specifications for coatings from ASTM and PCI.
Standard exterior colors are White (WH), Black (BK), Semi-Matte Black (BL), Bronze (BZ), and Silver (SV). Selux premium colors (SP) are available, please specify from your Selux color selection guide.
5 Year Limited LED Luminaire Warranty - Selux offers a 5 Year Limited Warranty to the original purchaser that the Inula Bollard LED luminaire shall be free from defects in material and workmanship for up to five (5) years from date of shipment. This limited warranty covers the LED driver and LED array when installed and operated according to Selux instructions. For details, see “Selux Terms and Condition of Sale.”
Listings and Ratings: Tested to NRTL Wet Location and IESNA LM-79-08 standards. LED tested to LM-80 standards. Luminaire tested to IK10 standard, IDA Approved and Lighting Facts Certified.
Luminaire and LED tested at 25°C (77°F) ambient temperature.
LED LIFE - LED light engine provides a reported lumen maintenance of 93% at 36,000 hours. L70 calculated greater than 100,000 hours. NRTL Listed (i.e. UL, CSA)
Visit selux.us for our LED End of Life recycling policy.
Specifications
SCIBL
Ø7 7/8” (200mm)
4” x 7” hand hole provided with flush cover and stainless steel tamper-resistant hardware
7 7/8” (200mm)
2 3/16” (56mm)
Illuminated Head
Page 3 of 6 (Rev. 12/2021) SCIBL_SS_v1.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Inula SteelCore Bollard
Mounting Information
SCIBL (SteelCore Detail)
SCIBL (Case Detail)
Hei
ght
(4.
5’ n
omin
al s
how
n) -
see
ch
art
bel
ow f
or a
ll h
eig
hts
Hand Hole
SteelCore Inside
8x Set Screws
Conduit (by others): Maximum 2x 1”
trade size
Height
4.0’ 48” (1219mm)
4.5’ 54” (1372mm)
5’ 60” (1524mm)
SteelCore Weight: 190 lbs
4000 PSI concrete foundation (by others)
Masonry blocks (1.5” max. height) to elevate bollard off subgrade (by others)
□30” (716mm)
□30” (716mm)
Conduit (by others): Maximum 2x 1” trade size
Note: Refer to SteelCore installation instructions for further details (available on Selux website).
Existing site material (varies by site)
Optional 2nd conduit (by others) to
next fixture
Ø16” (406mm)
Rebar(included withstructural core)
4000 PSI Concrete poured to fill SteelCore (by others)
*Note Critical Dimension: Top of SteelCore 36” +0”/-.5” to finished grade.
36” (914mm)
max.
34” (889mm)
Concrete Fill
Page 4 of 6 (Rev. 12/2021) SCIBL_SS_v1.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Inula SteelCore Bollard
LED Light Engine Distribution Guide
4QD 3Q 2Q180
Hand hole
1Q4QS 2Q90/2Q90MU
Wiring Diagram
Standard Wiring (120V-277V)**When dimming is not required cap dimming wires.
L1
N /L2
DIM(+)
DIM(-)
LIGHTENGINE
0-10Vdimming leads
SURGEPROTECTOR
BLACK
WHITE / RED
BARE
VIOLET **
PINK **
FROMLINECORD
Wire Designation Table
Source Voltage (VAC) Wire Color Wire Designation
UNV(120V-277V)
Black L1
White Neutral (120/277V) or L2 (208/240V)
Page 5 of 6 (Rev. 12/2021) SCIBL_SS_v1.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Inula SteelCore Bollard
Catalog #: IBL-X-2Q180-50-XX-120-DS• Maximum candela of 1249 at 42.5° from vertical.• Mounting Height = 4’ (1.22 m)1156 Delivered Lumens• 81 Lumens per Watt• B1-U0-G0
2Q180 / 14W LED / 5000K CCT
Catalog #: IBL-X-2Q90-50-XX-120-DS• Maximum candela of 1229 at 42.5° from vertical.• 1158 Delivered Lumens• 82 Lumens per Watt• B0-U0-G0
2Q90 / 14W LED / 5000K CCT
Photometry
Catalog #: IBL-X-1Q-50-XX-120-DS• Maximum candela of 1256 at 42.5° from vertical.• 577 Delivered Lumens• 75 Lumens per Watt• B0-U0-G0
1Q / 8W LED / 5000K CCT
Catalog #: IBL-XX-2Q90MU-50-XX-UNV• Maximum candela of 712 at 55° from vertical.• 854 Delivered Lumens• 81 Lumens per Watt• B1-U0-G1
2Q90MU / 14W LED / 5000K CCT
1
Maximum Candela = 1229.367 Located At Horizontal Angle = 45, Vertical Angle = 42.5# 1 - Vertical Plane Through Horizontal Angles (45 - 225) (Through Max. Cd.)
1
Maximum Candela = 1255.772 Located At Horizontal Angle = 315, Vertical Angle = 42.5# 1 - Vertical Plane Through Horizontal Angles (315 - 135) (Through Max. Cd.)
1
Maximum Candela = 1248.93 Located At Horizontal Angle = 85, Vertical Angle = 42.5# 1 - Vertical Plane Through Horizontal Angles (85 - 265) (Through Max. Cd.)
Page 6 of 6 (Rev. 12/2021) SCIBL_SS_v1.2
In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the function of the product. Specification sheets found at www.selux.us are the most recent versions and supercede all other printed or electronic versions.
Selux Corporation © 2021, T 845-834-1400, 800-735-8927, F 845-834-1401, www.selux.us
Inula SteelCore Bollard
Catalog #: IBL-X-4QD-50-XX-120-DS• Maximum candela of 1232 at 42.5° from vertical.• 2246 Delivered Lumens• 83 Lumens per Watt• B1-U0-G0
4QD / 27W LED / 5000K CCT
Photometry
Catalog #: IBL-X-4QS-50-XX-120-DS• Maximum candela of 1232 at 42.5° from vertical.• 2246 Delivered Lumens• 83 Lumens per Watt• B1-U0-G0
4QS / 27W LED / 5000K CCT
3Q / 20W LED / 5000K CCT
Catalog #: IBL-X-3Q-50-XX-120-DS• Maximum candela of 1223 at 42.5° from vertical.• 1689 Delivered Lumens• 82 Lumens per Watt• B1-U0-G0
TM-21 Lifetime Calculation
Light Engine
Ambient Temp (˚C)
Lumen Maintenance (% at hours)Reported L90
25K1 50K1 60K1
4B3025˚C 95.9% 92.8% 91.6% L90(10K) > 60,000 hours
40˚C 95.2% 91.5% 90.1% L90(10K) > 60,000 hours
1 Calculated in accordance with IESNA TM-21-11, projected values are within six times (6x) the IESNA LM-80-08 test duration
CCT Multiplier
3000K to Amber 0.22
3000K to 2700K 0.92
3000K to 3000K 1.00
3000K to 4000K 1.00
3000K to 5000K 1.06
1
Maximum Candela = 1231.933 Located At Horizontal Angle = 45, Vertical Angle = 42.5# 1 - Vertical Plane Through Horizontal Angles (45 - 225) (Through Max. Cd.)
Maximum Candela = 1231.933 Located At Horizontal Angle = 45, Vertical Angle = 42.5# 1 - Vertical Plane Through Horizontal Angles (45 - 225) (Through Max. Cd.)
Maximum Candela = 1222.526 Located At Horizontal Angle = 270, Vertical Angle = 42.5# 1 - Vertical Plane Through Horizontal Angles (270 - 90) (Through Max. Cd.)