Lucent DNB 9396 d2U ISE Presentation

Distributed Node BProduct Description

All Rights Reserved © Alcatel-Lucent 2006, #####2 | Presentation Title | Month 2006

Digital Unit: Alcatel-Lucent 9396 d2U

Small, high density: only 2U high, fits standard 19” racks.

Options for wall and pole mount; outdoor enclosure available

Can be mounted in other base stations facilities space

High CE capacity: 3x UCU-III (same as used in AT&T’s Macrocells) = 384 CEs

3x CPRI fibre links, up to 15km fibre length

T1 backhaul, h/w ready for Ethernet

Designed to stack & interconnect for growth

d2U overview


9396 d2U Design Overview

4 T1/E1 (internal)

RMT Eth 1

CPRI 1-3

Switch ON/OFF 1-4 (3 CPRI + 1 SERDES)

CTU-II RF Ports (GPS, 15MHz, TPUL, TCLK)

T1/E1 (1-8)

User Alarms (4+4)

RMT Eth 2

LIU Eth 1

Ground Point

DC Power

OCM-II Maintenance (Ethernet)

RS485 (RET) Cab. Alarms

100BaseSX

SERDES BBU Growth

Shelf ID switch

ESD Jack

Removable UCU-III

d2U overview


9396 d2U Physical Design

d2U overview


9396 d2U Wall Mounting

Indoor Vertical Mounting Options

Pole Mounting by re-use of wall mount assets plus pole strap

Security Locking ScrewsAnd Cable OrganizerAdded at AT&T request

d2U overview


9396 d2U outdoor enclosure - Main characteristics

DESCRIPTIONOutdoor dNodeB 2U:

• IP55• less than 30kg (equipped)• -33°C +50°C• Wall and Pole mounting kit• -48V DC Power supply initially• d2U equipped with up to 3 CE

cards• Option: External alarms kit and

PCM Lightning protection kit (2 * ½ 19”) in the user space.

VALUEThe d2U Outdoor is a very compact

digital NodeB designed to be installed in Outdoor environment on a pole or on a wall.

8 ins

24 ins

19 ins

d2U

1U User Space

d2U overview


9396 d2U Key Environmental Parameters

Competitive Environmental Design leading to lower TCO

Indoor Outdoor

Size (w x h x d) 17.3 x 15.7 x 3.5 in 24.6 x 18.9 x 7.9 in

Weight 25 lb 60 lb

Temperature 23 to 122F;

Option for +65C (149F)-40 to 131F;

Cold start -30C

Humidity 5% to 85% 15% to 100%

Cooling/Noise <45dBA BBU Fresh air forced cooling,

<49dBA

Power Supply -48VDC

100W typical (1 x UCU)

-48V DC

Ingress

Protection

EN 60529 IP55.

GR-487-CORE Wind Driven

Rain

d2U overview


Additional alarms on 9396 d2U: u4287

32 Alarms (8+24)• Lab delivery Sep 08

• New expansion card• Proven connector• Field installable

8 user alarms

Additional 24 user alarms

d2U overview


Capacity growth on d2U

Indoor

Alarms:

Mount the alarm expansion module in the d2U slot; connect internal ribbon cable.

Connect from the expansion module to the alarms with multiple RJ-45 terminated cables

T1s 5-8:

Mount the InPM (0.5U) in the rack next to d2U

Connect from d2U to InPM (micro dsub to micro dsub – all front panel)

Connect from InPM to the incoming T1s (RJ45s)

Outdoor

Alarms:

Mount the alarm expansion module in the d2U slot.

Mount the AnPM (0.5U) in the OD housing's 1U empty space.

Cable from the alarm expansion module to the AnPM (RJ45 to RJ45)

Cable from AnPM to external alarms (RJ45s)

T1s 5-8:

Protection is already included in the d2U OD

Cable from d2U OD to incoming T1s (RJ45s)

AnPM (0.5U H):

InPM (0.5U H):

d2U overview


Distributed capacity growth

Config 1: 1C3S Single Band (Full capacity)

(C1, S1)

(C1, S2)

Up to 8 T1

(C1, S3)

BBU1

Config 2: 2C3S Dual Band (limited CE capacity)

(C1-2, S1)

(C1-2, S2)

Up to 8 T1

(C1-2, S3)

BBU1

(C1-2, S1)

(C1-2, S2)8 T1

LIU Ethernet

(C1-2, S3)

IQ SERDES

Config 3: 2C3S full CE capacity, BH sharing, no CE pooling

BBU1

BBU2

New SW Add HW New SW + Add HW

1: Daisy-Chaining(u4262, r5.1)

3: Stacking, phase 1(74715, UA07)

2: UCU pooling(74978, UA06)

d2U evolution


UCU Pooling for Dual Band (UA6.0)

Common Chn f1s1

Common Chn f1s2Common Chn f1s3 Common Chn

f2s1,2,3

max. 14.4 Mbps/cell max. 14.4 Mbps/cell max. 9.6 Mbps/cell

R99 resources for both frequencies are pooled across all available UCU boardsHSPA resources are restricted so one UCU board can serve only one frequency

HSPA f1s1

HSPA f1s2

HSPA f1s3

UnusedHSPA

f2s1,2,3

Common Chn f1s1

Common Chn f1s2Common Chn f1s3 Common Chn f2s1

max. 14.4 Mbps/cell max. 14.4 Mbps/cell max. 14.4 Mbps/cell

Common Chn f2s2Common Chn f2s3

HSPA f1s1

HSPA f1s2

HSPA f1s3

HSPA f2s3

HSPA f2s1

HSPA f2s2

TODAY

WITH

POOLING

Assignment of HS sector-carriers to UCUs is determined by current UCU loadand not by engineering parameters

d2U evolution


Remote Radio Head: Alcatel-Lucent 9341 RRH40 Alcatel-Lucent’s 40W solution

Multiple frequencies being introduced 850, 1900MHz (+ other freqs in ALU portfolio)

Multi-carrier ready (2 or 3C) Outdoor environment: -40C to +55C(*)

230W typical power consumption Silent operation (no fans)

Small: 25 litres(*) Options for wall and pole mount Connector box – allows pre-mounting

CPRI fibre link, up to 15km fibre length HW support for star & daisy chain connection

Flexible RF configurations Rx-AIT, antenna sharing, Rx diversity (1 duplex, 1 simplex)

Support for TMAs Conventional current window operation at launch AISG TMA and RET to follow

-48V DC power supply

9341 RRH family

RRH overview


Remote Radio Head: Alcatel-Lucent 9341 RRH40 NAR portfolio

Operational Band Operationa

l

Bandwidth

Size

Cellular

850MHz

Band V

Tx:869-894MHz

Rx: 824-849MHz

10MHz

2 carriers

9.8 x 22.4 x 8.3

inches

53 lb

PCS

1900M

Hz

Band II

Tx:1930-1990

Rx: 1850-1910

Full band

15MHz

3 carriers

9.8 x 18.1 x 8.3

inches

44 lb

1990MHz1930

1990MHz1930MHz15MHz bandwidth anywhere in the band

15MHz b/w

1940 1950 1960 1970 1980

890MHz880MHz870MHz

894MHz869MHz10MHz bandwidth anywhere in the band

10MHz b/w

RRH overview


RRH characteristics

9341 RRH 40W portfolio

Frequency-specific

characteristics

See previous viewgraph

Fibre capacity 2 CPRI ports per RRH

1 port populated; 1 slot available for growth

614Mbps: now; 1.2Gbps: future

Daisy-chain: Release 5.1

RF 40W RF; 2 or 3 carrier b/w

Ancillary functions Duplex/ Simplex operation

Antenna sharing

TTLNA support (conventional current window: now; AISG:

future)

RET (hardware-ready; software future & tbc)

Weatherization NEBS Zone 4, IP55, UL50

Temperature range Outdoor: -40C to +55C(*)

(* Operation at 55C requires an optional solar parasol)

Power consumption -48V supply

230 W Typical

Acoustic noise Silent

RRH overview


Weatherproof mounting system & connection box for RRH

Initial installation of mount and cables:

1 Fix mounting bracket

2 Add connection box

3 Install cables &/ conduit

4 Re-seal connection box

5 Leave site

Later installation of RRH:

1 Open connection box

2 Mount RRH on bracket

3 Connect cables

4 Seal box to RRH

5 Commission system

Sealable weatherproof

cover

Mounting bracket

Connectionbox

2-pass installation supported:

RRH overview


Installed Cable box

Optical InterfacePowerTMA/

RETUser Alarms

All connections are push fit

Power and TMA/RET

connectors pass through glands

RRH overview


1900 and 850 Slim I/O Panel

Alarms(2x RJ45)

TTLNA(1x D9)

Power(2x stripped wire, up to 6 AWG)

Fibre daisy-chain

(SFP = 1x LC pair)

Fibre to d2U(SFP = 1x LC pair)

OCI port, Ethernet Blank port

RS232

RxAIT/ Simplex RF(2x QMA)

RRH overview

http://www.tech-faq.com/lc-connector.shtml


Fibre connectivity & growth: 9396 d2U to RRH40-08/ 19

d2U RRH

Opt TRXOpt TRX

RRH

Opt TRX

Opt TRXWeatherproof

cable box

Field-terminatable LC connectors

Growth items in greyOutdoor housing

Weatherproof cable gland

Weatherproof cable gland

Tx @ 1310nm Tx @ 1310nm

Single mode fibre pair: 15km range

Daisy-chain fibre configurations supported:

d2

U

RRH

RRH

RRH

RRH

RRH

RRH d2

U

RRH

RRH

RRHRRH

RRH RRH

RRH overview

Max: 15km per ‘hop’, 35km total


RRH antenna connectivity

RF switches configure simplex/ duplex; operation with Rx-AIT and antenna sharing.Switches are set by RMT management tool

Duplex operation Simplex operation Antenna Sharing

Diplexer

Fibre interfaceRadio

PALNA

Diplexer


PALNA LNALNA

Diplexer


PA LNALNA

Other BTSor RRH

Diplexer

Radio

PA LNALNA

CPRI

d2U

CPRI

d2U

CPRI

d2U

EAC EACAUXAUXEAC EACAUXAUX EAC EAC AUXAUX *

*Either port can be used. RF characteristics differ to allow use in different scenarios

Backhaul Backhaul Backhaul Backhaul

Baseband

RRH overview

Software support future: planned UA07

EAC EAC AUXAUX *


TTLNA support

RRH

TMA TMA

TMA power through ‘Y’ cable.Current window alarms; settable dependent on TMAs used.

Bias-T

Bias-T

Single housing for dual TMA

Direct cable connection may be used instead of Bias-Ts, where appropriate

Dotted red lines are signal paths

Bias-T may be included in TMA

RRH overview


RRH carrier growth

Deploy 1 RRH / 1 carrier configuration & grow to 2nd RF Carrier

2 Independent RX chain on each RRH (unique to Alcatel-Lucent RRH)

Add a 2nd RRH to the CPRI link

Where the 2nd RRH is same band

Single RRH asset for initial deployment for growthand for spares management

Separate RRH per carrier enhances availability

dNodeB

RRHF1

RRHF1

RRHF1

dNodeB

RRHF1

f1+f2

RRHF2

f1+f2

RRHF1

f1+f2

RRHF2

f1+f2

RRHF1

f1+f2

RRHF2

f1+f2

RRH overview


RRH 60W

Maximising compatibility with prior versions

Common ancillary and mounting hardware

Minimizes ancillary hardware versions; makes future upgrade simpler

Target is to have same housing as current 40W versions

For both 850 & 1900 MHz

Changes:

Higher efficiency PA

Higher efficiency PSU

Improved radio board

Other improvements under review

RRH evolution

Documentation and Site Guidelines


Distributed Node B Site Documents

401-382-030 Alcatel-Lucent 9341 Remote Radio Head (RRH) Site Preparation Guide

Rel. 5.0

401-382-031 Alcatel-Lucent 9341 Remote Radio Head Operation, Administration

and Maintenance Rel. 5.0

401-382-023 Alcatel-Lucent 9396 digital 2U Node B Site Preparation Guidelines Rel.

5.0

401-382-027 Alcatel-Lucent 9396 digital 2U Node B Operation, Administration and

Maintenance Rel. 5.0

All available from normal Alcatel-Lucent document library


Installation Options

Base Band Unit (d2U) Indoor/Outdoor• Pole Mounted (with pole brackets or pole band mounting)• Wall Mounted (with wall brackets)• Rack mounted (Indoor BBU only)• Floor Stand • 15A (indoor), 20A (outdoor) Circuit Breaker Required• CEQ.30770 BBU Indoor (ID) Node B Configuration (w/o RRH)• CEQ.30771 BBU Outdoor (OD) Node B Configuration (w/o RRH)

Remote Radio Heads (RRH) Outdoor• Pole Mount

• Small poles (2” – 6”) – 1 RRH per mount• Large poles (6” – 15”) – 2 or 3 RRH per mount

• Wall Mount• Floor Stand • 15A Circuit Breaker Required• CEQ.30603 RRH 850 40W• CEQ.30608 RRH 1900 40W

Low profile mountsmall clearance to poleback-to-back mount

Standard mountlarger clearance to pole3x 120 degree mount


BBU Indoor Installation

Ohio FOA Burnett RD. Site 2333


RRH Outdoor Installation at Ground Level

Ohio FOA Burnett RD. site 2333


BBU Indoor Installation

Columbus FOA Site 3164


RRH Outdoor Installation at Ground Level

Columbus FOA Site 3164

Lucent DNB 9396 d2U ISE Presentation

Documents

Transcript of Lucent DNB 9396 d2U ISE Presentation