Lubrizol Product Guide

8/13/2019 Lubrizol Product Guide

1/16

PRODUCT GUIDE

SOLSPERSE®Hyperdispersants

SOLPLUS®Hyperdispersants

LANCO™ THIX Thickener

IRCOGEL®

Rheology Control Agents

SOLTHIX ®Rheology Control Agents

HECTONE™ Thickener

SOLSPERSE®Hyperdispersants

SOLPLUS®Hyperdispersants

Hyperdispersants and Rheology Control

Additives for Paints and Coatings


2/16

Introduction

What this Guide Covers

This guide overviews the wide range of dispersant

technology offered by Lubrizol under the SOLSPERSE®

and SOLPLUS® tradenames as well as the extensive

range of rheology control additives like HECTONE™,

LANCO™ THIX, IRCOGEL® and SOLTHIX ®.

SOLSPERSE® and SOLPLUS® Hyperdispersants cover

a wide range of applications; almost any combination

of solid particulate being dispersed into a liquid medium

can be catered for. SOLPLUS® Hyperdispersants have

primarily been developed to meet the needs of the

plastics industry. They are also effective in certain coatings

applications.

HECTONE®, LANCO™ THIX, IRCOGEL®, and SOLTHIX ®

product lines have been developed to provide effective

rheology control for many coating systems, aiding pigment

suspension and preventing sag.

www.lubrizolcoatings.com


3/16

Hyperdispersants for Paints and Coatings

Benefits of using Hyperdispersants 4

Influence of Solvent Solubility on Product Selection 5

Formulation Guidelines 6 - 8

Hyperdispersants - Product List 9 - 10

Hyperdispersants - Technical Literature 11

Rheology Control Additives / Thickeners - Overview 12 - 13

Rheology Control Additives / Thickeners - Product List 14 - 15

Contents

3


4/16

Hyperdispersants for Paints and Coatings

4

EXCELLENT PIGMENT WETTING

QUALITY FLEXIBILITY PRODUCTIVITY

HIGHER COLOUR STRENGTH

HIGHER GLOSSREDUCED HAZE

INCREASED JETNESS

BETTER TRANSPARENCY

GREATER OPACITY

FASTER DISPERSION

LOWER ENERGY COSTS&

BETTER MILL UTILISATION

LESS NEED FOR

WETTING RESIN

PREVENTS INTER-PARTICLE ATTRACTION

QUALITY PRODUCTIVITY FLEXIBILITY FLEXIBILITY

BETTER FLOCCULATION

RESISTANCE

REDUCES MILLBASE

VISCOSITY TO ALLOW

HIGHER PIGMENT

CONTENT

ABILITY TO INCREASE

PRODUCTION VOLUMES

REDUCES PIGMENT

CONTRIBUTION TO

VISCOSITY OF COATINGS

REDUCED VOC

STABILISES

CONCENTRATES

AT LOW RESIN SOLIDS

MULTI-MEDIA TINTERS

WHICH ARE STORAGE

& TRANSPORT STABLE

Benefits of using Hyperdispersants


5/16

Influence of Solvent Solubility on Product Selection

For a polymeric Hyperdispersant to be effective, it must be soluble in the solvent in to which the pigment or filler is being

dispersed. The solvent medium used during dispersion is therefore the main criteria used in product selection. The main

grades offered for a range of solvents are mapped out below:

With certain organic pigments, it may be advantageous to include the use of a SOLSPERSE ® ‘synergist’ in combination

with the polymeric SOLSPERSE® Hyperdispersant. The synergist agents help to improve the interaction between the

polymeric SOLSPERSE® agent and the surface of certain organic pigments (e.g. phthalocyanine blues, greens) and carbon

black pigments. The synergist Hyperdispersants include:

SOLSPERSE® 5000 - for use on organic blues/greens and carbon black pigments in solvent based systems

SOLSPERSE® 12000 - for use on organic blues/greens and carbon black pigments in water and alcohol based systems

SOLSPERSE® 22000 - for use on certain organic red and yellow pigments in solvent based systems

The recommended polymeric Hyperdispersant : synergist ratios are

- 2 : 1 for carbon black pigments,

- 4 : 1 for organic blue/green pigments and

- 9 : 1 for organic red/yellow pigments.

13240

24000

26000

21000

13300

19000

11200

13650

64000

47000

20000

40000

41090

27000

72700

36000

35100

36000

41000

39000

32000

24000

36600

28000

32600

3000

Aliphatic

(white spirit, mineral spirit,

petroleum distillates,

paraffin solvent,

vegetable oils)

Aromatics

(toluene, xylene, Solvesso 100,

solvent naptha) Aromatic/

Ester Mixtures

UV Monomer

(acrylates, vinyl ether)

SOLSPERSE®

Mixtures of

Ester/Ketone

(butyl acetate, MPA,

EEP/MEK, MIAK,

MIBK, acetone)

Alcohol

(ethanol)

Water

Universal

(ethylene glycol,

propylene glycol,

hexylene glycol,

glycol/water)46000

66000

organic pigment inorganic pigment

8000

44000

20000

38500

76500

32500

71000

65000

76400

35000

5


6/16

Minimal resin

SOLSPERSE® Hyperdispersants are widely used in

applications where resins are a component of the millbase

e.g. paints and coatings.

Anchoring of the SOLSPERSE® Hyperdispersant to the

pigment surface can be affected by competition between

the resin and the Hyperdispersant for the surface of the

particle. Once the SOLSPERSE® Hyperdispersant anchor

group is attached to the pigment surface it will remain

firmly attached. Molecules of resin, however, are transiently

adsorbed on the surface of the pigment and, even though

not firmly anchored, they can still hinder the SOLSPERSE®

Hyperdispersant anchoring process. The competition for

the pigment surface, resulting from using “good wetting”

resins, is the most severe case.

In the presence of SOLSPERSE® Hyperdispersants, good

“wetting” or “grinding” resins need not necessarily be

selected for use in the dispersion medium. Other resins,

more suitable to end-film properties, can be used since

SOLSPERSE®

Hyperdispersants will provide the essentialpigment wetting function. We recommend that MINIMUM

resin solids are used in the millbase, but present in

sufficient quantities to produce the necessary let-down

stability or to produce final coatings with the appropriate

resin and solvent contents. If relatively good wetting resins

are used, we recommend using approximately 10% resin-

solids solution as the grinding medium and, for relatively

poor wetting resins, the minimum amount up to the level

conventionally used.

Need for a higher pigment loading

When using SOLSPERSE® Hyperdispersants, we have

described above the need to minimise the amount of resin

in the millbase. In doing so the contribution from the resin to

the viscosity of the millbase is reduced. Furthermore, since

SOLSPERSE® Hyperdispersants reduce inter-particulate

attraction, they reduce the viscosity contribution from

the pigment. Therefore using less resin, together with

SOLSPERSE® Hyperdispersant, means that the millbase

viscosity will be dramatically reduced.

SOLSPERSE® Hyperdispersants will also reduce the

viscosity of non-resin-containing dispersions e.g. plasticiser

dispersions. This lowering of viscosity may occur to such an

extent that there could be insufficient shear in the system

to facilitate effective dispersion. It is therefore essential

to increase the pigment content of a SOLSPERSE®

Hyperdispersant millbase to ensure adequate shear. This

is necessary for most effective pigment dispersion.

SOLSPERSE® Hyperdispersant

Formulation Guidelines

6


7/16

Method of Use and Dosage

1. Select the correct polymeric SOLSPERSE® Hyperdis-

persant according to the solvent system in the millbase

or tinter formulation.

2. With certain organic pigments, it may be advantageous

to include the use of a SOLSPERSE® synergist in

combination with the polymeric SOLSPERSE®

Hyperdispersant. The synergist agent helps to improve

the polarity of the surface of various organic pigments

(i.e. phthalocyanine blue, green and certain carbon

blacks) and increase the performance of the polymeric

SOLSPERSE® agent.

SOLSPERSE® 5000

(blue synergist for solvent based systems)

SOLSPERSE® 12000

(blue synergist for water based and alcohol solvent

systems)

SOLSPERSE®

22000(yellow synergist for solvent based systems)

The recommended polymeric to synergist ratios are

- 2 : 1 (carbon black),

- 4 : 1 (blue, green),

- 9 : 1 (red, yellow).

3. The quantity of polymeric SOLSPERSE® Hyperdispersant

to use is generally based on 2 mg/m2 of pigment surface

area. The generic formula for the calculation of theoretical

dosage is:

% Active SOLSPERSE®

Hyperdispersant on

weight of pigment

For example

Typically, the surface area of a phthalocyanine blue

pigment is 50 m2 /g.

% AOWP =50

=10% polymeric SOLSPERSE®

5 A gent On the Weight of Pigment

So, a typical dosage would be:

Phthalocyanine blue pigment 30.0

Polymeric SOLSPERSE® agent 3.0 (equivalent to 10% AOWP)

However, for phthalocyanine blue a SOLSPERSE®

synergist (e.g. SOLSPERSE® 5000) is used in addition to

the polymeric SOLSPERSE® agent, usually at a ratio of

4 : 1;

polymeric SOLSPERSE® : SOLSPERSE® synergist.

So, the final millbase formulation would be:

Phthalocyanine blue pigment 30.0Polymeric SOLSPERSE® agent 3.0SOLSPERSE® synergist 0.75

20% resin solids solution 66.25

100.00

A ladder series of polymeric SOLSPERSE® Hyperdispersant

levels should be carried out around this 2 mg/m2 level.

The Additives Selection Tool (AST) on our website

http://ast.lubrizol.com can assist in the choice ofSOLSPERSE® Hyperdispersant and provide guidelines on

a starting dosage. pigment surface area (m2 /g)=

5

(equivalentto 4:1 ratio)

7


8/16

4. Avoid other additives in the dispersion phase (e.g.

thixotropes) which may interfere with the efficiency of

the SOLSPERSE® Hyperdispersant in its dispersion of

the pigment.

5. In general use a low amount of resin in the dispersion

(maximum 10%) to try and minimise the competition

between the resin and the SOLSPERSE®Hyperdispersant

for the wetting of the pigment surface.

6. The recommended order of addition is:

a) Dissolve the polymeric SOLSPERSE® Hyperdispersant

in the millbase solvent(s) or in the solvent/resin mixture,

ensuring that the product is fully dissolved before

proceeding further

b) If required, add the synergist and distribute evenly with

stirring (note: the synergist is virtually insoluble)

c) Add the pigment in stages and disperse in the normal

manner

7. As a result of the effect of SOLSPERSE® Hyperdispersant

and reduced resin solids, the dispersion viscosity is lower.

To achieve an acceptable milling viscosity, gradually

increase the pigment loading.

8. After milling, continue to process as normal, adding any

other additives necessary, into the letdown phase.

SOLSPERSE® Hyperdispersant

Formulation Guidelines

8


9/169

Hyperdispersants - Product List

PRODUCT PHYSICAL DESCRIPTIONPACKAGE

SIZE* (kg)

% SOLIDS

CONTENT

SOLVENT SUITABLE

APPLICATION(S)

SHELF

LIFESOLSPERSE® 5000 Blue powder B15 100 - SYNERGIST 10 Years

SOLSPERSE® 8000 Brown viscous liquid D20 / D180 100 - Industrial & decorative 2 Years

SOLSPERSE® 11200 Amber liquid D20 / D180 50De-aromatised

white spiritDecorative 2 Years

SOLSPERSE® 12000 Blue powder B25 100 - SYNERGIST 10 Years

SOLSPERSE® 13240 Amber liquid D20 / D150 40 Toluene Industrial 1 Year

SOLSPERSE® 13300 Amber liquid D20 / D150 50De-aromatised

white spiritDecorative 2 Years

SOLSPERSE® 13650 Yellow viscous liquid D20 / D150 50 DUP *** Industrial & Decorative 2 Years

SOLSPERSE® 13940 Waxy paste/viscous liquid D20 / D150 40 Aliphatic distillate Industrial & marine 2 Years

SOLSPERSE® 19000 Viscous brown liquid D20 / D150 100 - Industrial & Decorative 2 Years

SOLSPERSE® 20000 Amber liquidD25 / D190 /

I1000100 - Water based applications 5 Years

SOLSPERSE® 22000 Yellow powder B20 100 - SYNERGIST 10 Years

SOLSPERSE® 24000 SC Amber granules D25 100 - Automotive & industrial 2 Years

SOLSPERSE® 24000 GR Amber granules D25 100 - Automotive & industrial 2 Years

SOLSPERSE® 26000 Cream coloured powder D25 100 - Automotive & industrial 2 Years

SOLSPERSE® 27000Pale yellow to amber viscous

liquid

D25 / D180 /

I1000100 - Water based applications 5 Years

SOLSPERSE® 28000 Amber to brown viscous liquid D20 100 - Industrial 2 Years

SOLSPERSE® 32000 Pale yellow to brown waxy solid D20 100 - Radiation cured coatings 2 Years

SOLSPERSE® 32500 Orange/yellow viscous liquid D20 / D180 40 Butyl acetate Automotive & industrial 2 Years

SOLSPERSE® 32600 Orange/yellow viscous liquid D20 / D180 40 Solvesso 100 Automotive & industrial 2 Years

SOLSPERSE® 35000 Yellow/brown solids D20 100 - Radiation cured coatings 2 Years

SOLSPERSE® 35100 Pale yellow to brown liquid D20 / D180 40 Butyl acetate Automotive & industrial 2 Years

SOLSPERSE® 36000 Off-white to yellow waxy solid D20 / D180 100 - Radiation cured coatings2 Years

SOLSPERSE® 36600Colourless to yellow viscous

liquidD20 50 Solvesso 100 Automotive & industrial 2 Years

SOLSPERSE® 38500 Yellow to brown viscous liquid D20 40 MPA Multi-media tinters 2 Years

SOLSPERSE® 39000Pale yellow to brown viscous

liquidD20 / D150 100 - Radiation cured coatings 2 Years

SOLSPERSE® 40000 Pale brown viscous liquid P25 /P200 84 Water Water based applications 2 Years

SOLSPERSE® 41000 Pale brown viscous liquid P25 / P200 100 - Radiation cured coatings 2 Years

SOLSPERSE® 41090 Pale brown viscous liquid P25 / P200 90 Water Water based applications 2 Years

SOLSPERSE® 44000 Yellow viscous liquid P25 / P200 50 Water Water based applications 1 Year

SOLSPERSE® 46000 Yellow viscous liquid P25 / P200 50 Water Water based applications 2 Years

SOLSPERSE® 47000 Amber liquid P25 / P200 40 Water Water based applications 2 Years

SOLSPERSE® 53095 Pale brown viscous liquid P25 95 Water Decorative 2 Years

SOLSPERSE® 64000 Amber clear liquid D20 / D180 100 - Decorative 2 Years

SOLSPERSE® 65000 Amber hazy liquid P25 / P200 90 Water Decorative 2 Years

SOLSPERSE® 66000 Pale brown viscous liquid P20 100 - Decorative 2 Years

KEY: *Packaging: B = box, D = drum, I = IBC, P = plastic drum; **methoxy propyl acetate; ***diundecyl phthalate


10/16

Hyperdispersants - Product List

10

PRODUCT PHYSICAL DESCRIPTIONPACKAGE

SIZE* (kg)

% SOLIDS

CONTENT

SOLVENT SUITABLE

APPLICATION(S)

SHELF

LIFESOLSPERSE® 71000 Yellow viscous liquid D20 / D180 100 - Radiation cured coatings 2 Years

SOLSPERSE® 72700 Colourless to pale yellow liquid D20 / D180 40 Ethyl acetateSolvent based packaging

inks2 Years

SOLSPERSE® 76400Clear to pale yellow/brown

liquidD20 / D180 50 MPA** Automotive & industrial 2 Years

SOLSPERSE® 76500 Yellow/brown liquid D20 / D180 50 Butyl acetate Automotive & industrial 2 Years

SOLSPERSE® RM 50 Amber viscous liquid D190 50 MPA Automotive & industrial 2 Years

Humectant GRB2 Straw coloured liquid P125 / I1000 80 Water Decorative 1 Year

Humectant GRB3 Straw coloured liquid P125 / I1000 90 Water Decorative 1 Year

SOLPLUS® D510 Yellow viscous liquid D20 / D180 100 - Epoxy systems 2 Years

SOLPLUS®

D540 Amber, brown liquid P20 / P200 100 -

Decorative

(transparent iron oxide) 2 Years

SOLPLUS® F100 Clear, pale yellow liquid D20 / D180 - - Air release agent /

Epoxy systems1 Year

SOLPLUS® L300 Amber powder D25 100 - Powder coatings 2 Years

SOLPLUS® L400 Pale amber powder D25 100 - Powder coatings 2 Years

KEY: *Packaging: B = box, D = drum, I = IBC, P = plastic drum; **methoxy propyl acetate; ***diundecyl phthalate


11/16

Hyperdispersants - Technical Literature

For further information on the benefits of using SOLSPERSE® Hyperdispersants including methods of use and example

formulations, please refer to the following pieces of Technical Literature:

DOCUMENT TITLE APPLICATION

Hyperdispersants Technology and Benefits General

SOLSPERSE® Synergists General

SOLSPERSE® 27000 for the Dispersion of Organic Pigments in Water Based Paints Water

SOLSPERSE® 40000 and SOLSPERSE® 41090 for the Dispersion of Inorganic Pigments

in Water Based PaintsWater

SOLSPERSE® 44000 for Automotive and Industrial Water Based Tinters Water

SOLSPERSE®

46000 for Automotive and Industrial Water Based Tinters Water

SOLSPERSE® 47000 for Decorative and Industrial Water Based Tinters Water

HUMECTANT GRB2 for Water Based Resin Free Tinters Water

HUMECTANT GRB3 for Water Based Resin Free Tinters Water

SOLSPERSE® 64000, SOLSPERSE® 65000 and SOLSPERSE® 66000 for Universal Decorative Tinters Universal

SOLSPERSE® 8000 for Solvent Based Organoclay Dispersions Solvent

SOLSPERSE® 11200 for Solvent Based Decorative Paints Solvent

SOLSPERSE® 13300 for the Dispersion of Pigments in High Solids SB Decorative Paints Solvent

SOLSPERSE® 13940 for Aliphatic (Mineral Spirit) Based Paints Solvent

SOLSPERSE® 28000 for Solvent Based Pigment Concentrates for General Industrial Paints Solvent

SOLSPERSE® 32500 and SOLSPERSE® 32600 for Solvent Based Automotive and General Industrial Paints Solvent

SOLSPERSE® 35100 for the Dispersion of Organic Pigments in Solvent Based Automotive OEM and VR Paints Solvent

SOLSPERSE® 36600 for White Coil Coating Applications Solvent

SOLSPERSE® 38500 for Solvent Based Multi-Media Pigment Concentrates Solvent

SOLSPERSE® 53095 for Solvent Based White Decorative and Architectural Paints Solvent

SOLSPERSE® 76500 for Automotive and General Industrial Solvent Based Paints Solvent

SOLSPERSE® RM50 Multi-Compatible Dispersing Resin Solvent

SOLSPERSE® 41000 for the Dispersion of Treated Silica Matting Agents in UV Coatings Radiation cured

SOLSPERSE® 71000 for the Dispersion of Silica Matting Agents in UV Coatings Radiation cured

SOLPLUS® L300 for the Dispersion of Pigments in Powder Coating Systems Powder

SOLPLUS® L400 for the Dispersion of Titanium Dioxide in Powder Coating Systems Powder

11

Technical literature can be downloaded from the internet by registering for the Lubrizol Hyperdispersants “Additives

Selection Tool” at http://ast.lubrizol.com or alternatively, documents can be requested from your local sales representative

or from the appropriate regional contact number printed on the back of this document.


12/1612

Montmorrillonite Clay

HECTONE™ H

Rheology control additive based on Montmorrillonite clay for

water based coatings including highly filled emulsion paints,

plasters and building products. Provides reproducible

thixotropic behaviour. Can be post-added. Offers effective

sag resistance and antisettling.

HECTONE™ M

Rheology control additive based on chemically inert purified

Montmorrillonite clay for water based coatings including

emulsion paints, adhesives and related products. Acts as

a thickening agent providing good thickening, antisettling

and sag control.

HECTONE™ M4

Rheology control additive of purified Montmorrillonite clay

based on a thixotropic gel for water based coatings

including emulsion paints, adhesives and related products.

Acts as a thickening agent providing good thickening,antisettling and sag control.

LANCO™ THIX P 12

Rheology control additive based on Montmorrillonite clay

for water based systems like emulsion paints and building

products, e.g. adhesives, plasters, putties and sealants.

Gives thixotropic gels that provide efficient thickening

and good antisettling properties with good stability to

temperature, pH and electrolytes.

HMASE and ASE Types

SOLTHIX ® A100

Rheology control additive based on a hydrophobically

modified alkali swellable associative thickener for water

based automotive and general industrial paints. Improves

dispersion rheology and settling in aqueous paints,

especially enhancing the flop characteristics in water borne

metallic coatings.

SOLTHIX ® A200

Rheology control additive based on an alkali swellable

emulsion thickener for water based automotive and general

industrials paints. Improves dispersion rheology and settling

in aqueous paints resulting in a medium yield value.

SOLTHIX ® A300

Rheology control additive based on an alkali swellable

emulsion thickener for water based automotive and general

industrials paints. Wide compatibility and excellent sag

control which may be used alone or in conjunction withSOLTHIX ® A200 for optimum rheology.

Rheology Control Additives / Thickeners - Overview


13/1613

Acrylic Polymer

SOLTHIX ® 250

Rheology control additive based on an acrylic polymer

supplied in MPA (1-Methoxy-2-Propyl Acetate). Especially

effective in applications using an unblocked acid catalyst

such as solvent borne automotive, industrial and decorative

systems that contain a moderate to high pigmentation level.

Providing excellent thixotropic recovery and sag resistance

while maintaining a high gloss finish.

Overbased Calcium Sulfonate Gel

IRCOGEL® 900

Rheology control additive based on an overbased calcium

sulphonate gel supplied as a stiff gel for sag control in PVC

plastisols, adhesives and sealants. Maintains yield value

during cure cycle thus decreasing product defects, and

flow of the coating during application. Controls sag in PVC

plastisol coatings and similar materials by creating a more

shear-thinning rheological behavior.

IRCOGEL® 903


sulphonate gel supplied in DINP as a soft pourable gel for

PVC plastisols, adhesives and sealants and liquid colour

concentrate systems. Possesses very good sag control

at all temperatures. Maintains good flow due to minimal

thickening effect.

IRCOGEL® 904


sulphonate gel supplied in mineral spirit as a pourable

liquid for PVC organosols coatings and sealants. Provides

very good sag control at higher temperatures. Possesses

effective antisettling properties.


14/16


15/1615


16/16

EUROPE - MIDDLE EAST - AFRICA

Lubrizol Limited

PO Box 42

Hexagon Tower

Blackley

Manchester M9 8ZS

England

Tel: +44 (0) 161 721 2004

Fax: +44 (0) 161 721 5209

Website: www.solsperse.com

E-mail: [email protected]

ASIA PACIFIC

Lubrizol Southeast Asia (Pte) Limited

41 Science Park Road

04-11 The Gemini

Singapore Science Park ll

Singapore 117610

Tel: +65 6773 1180

Fax: +65 6773 6988

JAPAN

Lubrizol Japan Limited

Meiji-Yasuda Seimei

Sakaisuji-honmachi Building

10F 1-7-15 Minami-Honmachi

Chuo-ku Osaka 541-0054

Japan

Tel: +81 (0) 6 4705 7252

Fax: +81 (0) 6 4705 7257

Your contact for Hyperdispersants and Rheology Control Additives:

The infor mation co ntaine d herein is beli eved to be rel iable, but no represent ations , guarantees or war ranties of any kind ar e made as to its accu racy, suit abil ity for pa rtic ular appli cations or the re-sults to be obtained. T he information is ba sed on laboratory work with small-s cale equipment and does not necessar ily indicate end product performance. Because of the variations in methods, con-ditions and equipment used commercially in process ing these materials, no warranties or guarantees are made as to the suitability of the products for the applications disclosed. Full-scale testing and endproduct performance are the responsibility of the user. Lubrizol shall not be liable for and the customer assumes all risk and liability of any use or handling of any material beyond Lubrizol‘s direct control.

The SELLER MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.Nothing contained herein is to be considered as permission, recommendation, nor as an inducement to practice any patented invention without permission of the patent owner.

® SOLSPERSE, SOLPLUS, IRCOGEL and SOLTHIX are registered trademarks of The Lubrizol Corporation.™ LANCO and HECTONE are trademarks of The Lubrizol Corporation.© The Lubrizol Corporation 2011 all rights reserved

www.lubrizolcoatings.com

Global Headquarters

Lubrizol Advanced Materials, Inc.

9911 Brecksville Road

Cleveland, OH 44141-3247

Tel: + 1 - 216 - 447 - 5000

Lubrizol Product Guide

Documents

Transcript of Lubrizol Product Guide