Location:

Agenda:7:30 – 8:00 Continental Breakfast8:00 – 9:30 Lab Session10:00 - 11:30 Lab Session11:30 – 1:00 Lunch1:00 – 2:30 Lab Session3:00 – 4:30 Lab Session

Choose from the Lab Sessions on Reverse Side

Visit training.kendallelectric.com/OnTour to Register and Reserve your Lab Sessions

Dates:

Hands-on Application Labs focused on the Integrated Architecture and integrated safety products in the Logix family of controllers. Join us for the Integrated Architecture on Tour event!

Don’t miss this opportunity to learn about the latest suite of control products in this scalable integrated architecture system from experienced industry professionals.

Seating is limited so don’t miss out on this excellent opportunity to learn about these new technologies.

Through the convergence of control and information systems, Integrated Architecture delivers plant wide optimization, machine builder performance, and sustainable production and serves as a foundation to help you.

Core technologies include:

• Logix: Scalable, flexible, programmable automation controllers with a common control engine and development environment

• Kinetix: World class, high performance motion control • Stratix: Scalable network solutions for any application

and network requirements • View: Visualization products that provide critical real-

time data for every industry, application and manufacturing environment

• PowerFlex: Variable speed motor control for applications from low to medium voltage, simple to complex

Maximize the potential of your production operations with integrated architecture – an innovative automation system that offers infinite possibilities for optimizing your plant.

Learn about the latest solutions from Rockwell Automation/Allen-Bradley with Hands-On Lab Sessions

This will be a great opportunity to explore a wide variety of smart, safe, sustainable, manufacturing solutions geared toward improving your business profitability, optimize your plant, and make you more competitive.

832 Scribner Ave. N.W. July 14th & 15thGrand Rapids, MI

11581Greenway Drive July 17th & 20thHolland, MI

1699 Wierengo Dr. July 22nd & 23rdMuskegon, MI

Session Title Session Description Category Lab Hardware

L14Drive Programming with the PowerFlex® 525 AC Drive

Learn how to quickly and easily configure PowerFlex 525 AC drives. From the built‐in human interface module (HIM), to Connected Components Workbench™ or the Studio 5000™ environment, we provide you with powerful, intuitive tools to help enhance your user experience and reduce your development time so you can deliver machines faster and more efficiently.  Finally see how automatic device configuration can save valuable time to get your machines back on line faster.

Power, Motion, & Motor Control

L24

Basic Drive Programming with PowerFlex 750 Series Drives

Learn the basics of drive programming using the PowerFlex family of AC drives, including the latest PowerFlex 755 AC drives. Attendees will program these drives using both device programmers and PC software.

Power, Motion, & Motor Control

L03

Applying Integrated Architecture® Features to Improve Industrial Control System (ICS) Security 

Gain a better understanding of security features available in the Integrated Architecture and PlantPAx® solutions. Learn how you can protect your controller content and how to control access to your processes with FactoryTalk® Security in both Rockwell Software Studio 5000® and FactoryTalk® View SE.  Finally, learn how to audit controller changes and detect unauthorized changes using FactoryTalk® AssetCentre.  

Control System Design

L08

Size, Select and Configure Kinetix and Powerflex Drives Using Motion Analyzer

Experience the speed and simplicity of using the new Motion Analyzer to size and select motion and drive systems.  This session will premiere the new web based selection tool.

Control System Design

L10

Effective Design Methods for Integrating Safety using Logix™ Controllers

Learn how you can help improve safety and productivity while reducing cost using the integrated standard and safety GuardLogix® solution.  This lab uses simple built‐in safety instructions and features to demonstrate how easily these goals can be achieved.

Control System Design

L15Integrated Motion on EtherNet/IP

Learn how to configure, program, and commission a CompactLogix™ 5370 controller with integrated motion on EtherNet/IP using the new Kinetix® 5500 servo drives and PowerFlex® 527 variable frequency drives.

Control System Design

L17Rockwell Software Studio 5000® and Logix Basics Lab

Are you new to Logix programming or want a quick refresher on the basics?  This session will provide an overview of the core capabilities offered in Rockwell Software Studio 5000® and highlight the importance of good design practices.  Mastering these fundamentals will help ensure a good design and prepare you for the advanced session.

Control System Design

L18Rockwell Software Studio 5000®  and Logix Advanced Lab

So you've got the basics, now let's take it to the next level with this advanced Rockwell Software Studio 5000® and Logix session.  This pick‐and‐choose lab will allow you to explore topics of interest and quickly see how capabilities add the most value to your design.  By the end of this session, you will be on your way to becoming an expert.

Control System Design

L25SLC™ to CompactLogix™ Migration

Learn how to easily convert an SLC system to a CompactLogix system using IAB and translation tools provided by Rockwell Automation®.  Two scenarios will be presented:  1) replacement of a SLC system, processor and I/O, with a CompactLogix system  2) replacement of the SLC processor with a CompactLogix while retaining the SLC I/O

Control System Design

L31Basics of Ethernet/IP Lab

EtherNet/IP enables both seamless plant‐wide information and convergence of industrial and non‐industrial network traffic, while maintaining real‐time communication for control applications. This hands‐on lab will cover a variety of techniques, best practices, software and products using EtherNet/IP. This lab will provide Stratix 5700 and Stratix 8000 hardware familiarization. Configuring the Stratix 5700 using Device Manager. Configuring the Stratix 8000 using the AOI and controller tags in Studio 5000. Stratix FactoryTalk View faceplates for diagnostics. Device Level Ring Topology configuration.

Control System Design

L13

Reducing Machinery Safety System Development Time using Safety Automation Builder

In this session, you'll learn how to help reduce development and deployment time of machinery safety systems using the Safety Automation Builder (SAB) configuration tool. SAB facilitates the planning of safety systems, helping you lay out the machine safety hazards and access points, define the appropriate safety functions, select products to achieve the required safety performance level (PL) according to EN ISO 13849‐1, create SISTEMA projects for analysis of all Safety Functions, and create a bill of material.

Safety & Compliance

L06

FactoryTalk® View Site Edition: Building Applications

This hands‐on lab focuses on the basic building blocks for a FactoryTalk® Site Edition application. Topics include creation of screens, tag database population, parameter passing, datalogs, trending, macros, events, introduction to FactoryTalk® Alarms and Events, introduction to VBA, client configuration, and an introduction to FactoryTalk® ViewPoint. 

Information Visualization Software

L11

Techniques to Increase Efficiency with PanelView™ Plus 6 Applications

Learn how to increase line productivity by managing machine and process parameters with Recipe Manager, reduce travel cost by monitoring applications remotely with ViewPoint and VNC, increase OEE with log production data with DataStore Plus, and reduce maintenance cost with multi‐language support. 

Information Visualization Software